summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/cirrus
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2012-05-18 12:56:28 +0000
committerDavid S. Miller <davem@davemloft.net>2012-05-18 23:48:07 -0400
commitdd92b9ade4390783fdb64eec92dc5150a918e9a6 (patch)
tree4a7a421528dd10e1eb8d164efb83eba812738ca9 /drivers/net/ethernet/cirrus
parent204a38ab2fd2fffaf003f6a5a021a1662caca37d (diff)
downloadlinux-dd92b9ade4390783fdb64eec92dc5150a918e9a6.tar.bz2
cirrus: cs89x0: Convert printks to pr_<level>
Use more current logging styles. Add pr_fmt. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/cirrus')
-rw-r--r--drivers/net/ethernet/cirrus/cs89x0.c116
1 files changed, 61 insertions, 55 deletions
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 41c8ac92080b..b6120400d080 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -46,6 +46,8 @@
* Crystal Semiconductor data sheets.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/printk.h>
#include <linux/errno.h>
@@ -385,15 +387,15 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
#endif
}
- printk(KERN_DEBUG "PP_addr at %p[%x]: 0x%x\n",
- ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
+ pr_debug("PP_addr at %p[%x]: 0x%x\n",
+ ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
iowrite16(PP_ChipID, ioaddr + ADD_PORT);
tmp = ioread16(ioaddr + DATA_PORT);
if (tmp != CHIP_EISA_ID_SIG) {
- printk(KERN_DEBUG "%s: incorrect signature at %p[%x]: 0x%x!="
- CHIP_EISA_ID_SIG_STR "\n",
- dev->name, ioaddr, DATA_PORT, tmp);
+ pr_debug("%s: incorrect signature at %p[%x]: 0x%x!="
+ CHIP_EISA_ID_SIG_STR "\n",
+ dev->name, ioaddr, DATA_PORT, tmp);
retval = -ENODEV;
goto out1;
}
@@ -416,12 +418,12 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
if (net_debug && version_printed++ == 0)
printk(version);
- printk(KERN_INFO "%s: cs89%c0%s rev %c found at %p ",
- dev->name,
- lp->chip_type == CS8900 ? '0' : '2',
- lp->chip_type == CS8920M ? "M" : "",
- lp->chip_revision,
- lp->virt_addr);
+ pr_info("%s: cs89%c0%s rev %c found at %p ",
+ dev->name,
+ lp->chip_type == CS8900 ? '0' : '2',
+ lp->chip_type == CS8920M ? "M" : "",
+ lp->chip_revision,
+ lp->virt_addr);
reset_chip(dev);
@@ -474,8 +476,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
if (net_debug > 1)
- printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
- dev->name, i, lp->adapter_cnf);
+ pr_info("%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
+ dev->name, i, lp->adapter_cnf);
/* IRQ. Other chips already probe, see below. */
if (lp->chip_type == CS8900)
@@ -489,15 +491,15 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
/* First check to see if an EEPROM is attached. */
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
- printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
+ pr_warn("No EEPROM, relying on command line....\n");
else if (get_eeprom_data(dev, START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
- printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
+ pr_warn("EEPROM read failed, relying on command line\n");
} else if (get_eeprom_cksum(START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
/* Check if the chip was able to read its own configuration starting
at 0 in the EEPROM*/
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
(EEPROM_OK | EEPROM_PRESENT))
- printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
+ pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
} else {
/* This reads an extended EEPROM that is not documented
@@ -519,8 +521,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
}
if (net_debug > 1)
- printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
- dev->name, lp->adapter_cnf);
+ pr_debug("%s: new adapter_cnf: 0x%x\n",
+ dev->name, lp->adapter_cnf);
}
/* allow them to force multiple transceivers. If they force multiple, autosense */
@@ -536,8 +538,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
}
if (net_debug > 1)
- printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
- dev->name, lp->force, lp->adapter_cnf);
+ pr_debug("%s: after force 0x%x, adapter_cnf=0x%x\n",
+ dev->name, lp->force, lp->adapter_cnf);
/* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
@@ -547,10 +549,10 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
* ifconfig IFACE hw ether AABBCCDDEEFF
*/
- printk(KERN_INFO "cs89x0 media %s%s%s",
- (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
- (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
- (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
+ pr_info("media %s%s%s",
+ (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
+ (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
+ (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
lp->irq_map = 0xffff;
@@ -570,7 +572,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
#else
/* Translate the IRQ using the IRQ mapping table. */
if (i >= ARRAY_SIZE(cs8900_irq_map))
- printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
+ pr_err("invalid ISA interrupt number %d\n", i);
else
i = cs8900_irq_map[i];
@@ -660,15 +662,12 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
*/
if (ioport & 1) {
if (net_debug > 1)
- printk(KERN_INFO "%s: odd ioaddr 0x%lx\n",
- dev->name,
- ioport);
+ pr_info("%s: odd ioaddr 0x%lx\n", dev->name, ioport);
if ((ioport & 2) != 2)
if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
ADD_SIG) {
- printk(KERN_ERR "%s: bad signature 0x%x\n",
- dev->name,
- ioread16(io_mem + ADD_PORT));
+ pr_err("%s: bad signature 0x%x\n",
+ dev->name, ioread16(io_mem + ADD_PORT));
ret = -ENODEV;
goto unmap;
}
@@ -711,7 +710,7 @@ struct net_device * __init cs89x0_probe(int unit)
irq = dev->irq;
if (net_debug)
- printk(KERN_INFO "cs89x0:cs89x0_probe(0x%x)\n", io);
+ pr_info("cs89x0_probe(0x%x)\n", io);
if (io > 0x1ff) { /* Check a single specified location. */
err = cs89x0_ioport_probe(dev, io, 0);
@@ -731,7 +730,7 @@ struct net_device * __init cs89x0_probe(int unit)
return dev;
out:
free_netdev(dev);
- printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
+ pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
return ERR_PTR(err);
}
#endif
@@ -1012,10 +1011,10 @@ detect_tp(struct net_device *dev)
writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
- printk(KERN_INFO "%s: negotiating duplex...\n", dev->name);
+ pr_info("%s: negotiating duplex...\n", dev->name);
while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
if (jiffies - timenow > 4000) {
- printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
+ pr_err("**** Full / half duplex auto-negotiation timed out ****\n");
break;
}
}
@@ -1167,7 +1166,7 @@ net_open(struct net_device *dev)
if (i >= CS8920_NO_INTS) {
writereg(dev, PP_BusCTL, 0); /* disable interrupts. */
- printk(KERN_ERR "cs89x0: can't get an interrupt\n");
+ pr_err("can't get an interrupt\n");
ret = -EAGAIN;
goto bad_out;
}
@@ -1176,7 +1175,7 @@ net_open(struct net_device *dev)
{
#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
- printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
+ pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
ret = -EAGAIN;
goto bad_out;
@@ -1191,7 +1190,7 @@ net_open(struct net_device *dev)
write_irq(dev, lp->chip_type, dev->irq);
ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev);
if (ret) {
- printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq);
+ pr_err("request_irq(%d) failed\n", dev->irq);
goto bad_out;
}
}
@@ -1204,7 +1203,8 @@ net_open(struct net_device *dev)
get_order(lp->dmasize * 1024));
if (!lp->dma_buff) {
- printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
+ pr_err("%s: cannot get %dK memory for DMA\n",
+ dev->name, lp->dmasize);
goto release_irq;
}
if (net_debug > 1) {
@@ -1215,12 +1215,14 @@ net_open(struct net_device *dev)
}
if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
!dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
- printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name);
+ pr_err("%s: not usable as DMA buffer\n",
+ dev->name);
goto release_irq;
}
memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
if (request_dma(dev->dma, dev->name)) {
- printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma);
+ pr_err("%s: cannot get dma channel %d\n",
+ dev->name, dev->dma);
goto release_irq;
}
write_dma(dev, lp->chip_type, dev->dma);
@@ -1259,7 +1261,8 @@ net_open(struct net_device *dev)
default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
}
if (!result) {
- printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
+ pr_err("%s: EEPROM is configured for unavailable media\n",
+ dev->name);
release_dma:
#if ALLOW_DMA
free_dma(dev->dma);
@@ -1277,7 +1280,8 @@ release_irq:
case A_CNF_MEDIA_10B_T:
result = detect_tp(dev);
if (result == DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
+ pr_warn("%s: 10Base-T (RJ-45) has no cable\n",
+ dev->name);
if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
}
@@ -1285,7 +1289,7 @@ release_irq:
case A_CNF_MEDIA_AUI:
result = detect_aui(dev);
if (result == DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
+ pr_warn("%s: 10Base-5 (AUI) has no cable\n", dev->name);
if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
}
@@ -1293,7 +1297,7 @@ release_irq:
case A_CNF_MEDIA_10B_2:
result = detect_bnc(dev);
if (result == DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
+ pr_warn("%s: 10Base-2 (BNC) has no cable\n", dev->name);
if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
}
@@ -1309,24 +1313,25 @@ release_irq:
if (lp->adapter_cnf & A_CNF_10B_2)
if ((result = detect_bnc(dev)) != DETECTED_NONE)
break;
- printk(KERN_ERR "%s: no media detected\n", dev->name);
+ pr_err("%s: no media detected\n", dev->name);
goto release_dma;
}
switch (result) {
case DETECTED_NONE:
- printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
+ pr_err("%s: no network cable attached to configured media\n",
+ dev->name);
goto release_dma;
case DETECTED_RJ45H:
- printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
+ pr_info("%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
break;
case DETECTED_RJ45F:
- printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
+ pr_info("%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
break;
case DETECTED_AUI:
- printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name);
+ pr_info("%s: using 10Base-5 (AUI)\n", dev->name);
break;
case DETECTED_BNC:
- printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name);
+ pr_info("%s: using 10Base-2 (BNC)\n", dev->name);
break;
}
@@ -1566,7 +1571,7 @@ net_rx(struct net_device *dev)
skb = netdev_alloc_skb(dev, length + 2);
if (skb == NULL) {
#if 0 /* Again, this seems a cruel thing to do */
- printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
+ pr_warn("%s: Memory squeeze, dropping packet\n", dev->name);
#endif
dev->stats.rx_dropped++;
return;
@@ -1808,8 +1813,8 @@ int __init init_module(void)
lp->auto_neg_cnf = AUTO_NEG_ENABLE;
if (io == 0) {
- printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
- printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
+ pr_err("Module autoprobing not allowed\n");
+ pr_err("Append io=0xNNN\n");
ret = -EPERM;
goto out;
} else if (io <= 0x1ff) {
@@ -1819,7 +1824,8 @@ int __init init_module(void)
#if ALLOW_DMA
if (use_dma && dmasize != 16 && dmasize != 64) {
- printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize);
+ pr_err("dma size must be either 16K or 64K, not %dK\n",
+ dmasize);
ret = -EPERM;
goto out;
}