chelsio: Move the Chelsio drivers

Moves the drivers for the Chelsio chipsets into
drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile
changes.

CC: Divy Le Ray <divy@chelsio.com>
CC: Dimitris Michailidis <dm@chelsio.com>
CC: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 127 insertions, 0 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h
new file mode 100644
index 000000000000..967cc4286359
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h
@@ -0,0 +1,127 @@
+/* $Date: 2005/03/07 23:59:05 $ $RCSfile: mv88e1xxx.h,v $ $Revision: 1.13 $ */
+#ifndef CHELSIO_MV8E1XXX_H
+#define CHELSIO_MV8E1XXX_H
+
+#ifndef BMCR_SPEED1000
+# define BMCR_SPEED1000 0x40
+#endif
+
+#ifndef ADVERTISE_PAUSE
+# define ADVERTISE_PAUSE 0x400
+#endif
+#ifndef ADVERTISE_PAUSE_ASYM
+# define ADVERTISE_PAUSE_ASYM 0x800
+#endif
+
+/* Gigabit MII registers */
+#define MII_GBCR 9       /* 1000Base-T control register */
+#define MII_GBSR 10      /* 1000Base-T status register */
+
+/* 1000Base-T control register fields */
+#define GBCR_ADV_1000HALF         0x100
+#define GBCR_ADV_1000FULL         0x200
+#define GBCR_PREFER_MASTER        0x400
+#define GBCR_MANUAL_AS_MASTER     0x800
+#define GBCR_MANUAL_CONFIG_ENABLE 0x1000
+
+/* 1000Base-T status register fields */
+#define GBSR_LP_1000HALF  0x400
+#define GBSR_LP_1000FULL  0x800
+#define GBSR_REMOTE_OK    0x1000
+#define GBSR_LOCAL_OK     0x2000
+#define GBSR_LOCAL_MASTER 0x4000
+#define GBSR_MASTER_FAULT 0x8000
+
+/* Marvell PHY interrupt status bits. */
+#define MV88E1XXX_INTR_JABBER          0x0001
+#define MV88E1XXX_INTR_POLARITY_CHNG   0x0002
+#define MV88E1XXX_INTR_ENG_DETECT_CHNG 0x0010
+#define MV88E1XXX_INTR_DOWNSHIFT       0x0020
+#define MV88E1XXX_INTR_MDI_XOVER_CHNG  0x0040
+#define MV88E1XXX_INTR_FIFO_OVER_UNDER 0x0080
+#define MV88E1XXX_INTR_FALSE_CARRIER   0x0100
+#define MV88E1XXX_INTR_SYMBOL_ERROR    0x0200
+#define MV88E1XXX_INTR_LINK_CHNG       0x0400
+#define MV88E1XXX_INTR_AUTONEG_DONE    0x0800
+#define MV88E1XXX_INTR_PAGE_RECV       0x1000
+#define MV88E1XXX_INTR_DUPLEX_CHNG     0x2000
+#define MV88E1XXX_INTR_SPEED_CHNG      0x4000
+#define MV88E1XXX_INTR_AUTONEG_ERR     0x8000
+
+/* Marvell PHY specific registers. */
+#define MV88E1XXX_SPECIFIC_CNTRL_REGISTER               16
+#define MV88E1XXX_SPECIFIC_STATUS_REGISTER              17
+#define MV88E1XXX_INTERRUPT_ENABLE_REGISTER             18
+#define MV88E1XXX_INTERRUPT_STATUS_REGISTER             19
+#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER       20
+#define MV88E1XXX_RECV_ERR_CNTR_REGISTER                21
+#define MV88E1XXX_RES_REGISTER                          22
+#define MV88E1XXX_GLOBAL_STATUS_REGISTER                23
+#define MV88E1XXX_LED_CONTROL_REGISTER                  24
+#define MV88E1XXX_MANUAL_LED_OVERRIDE_REGISTER          25
+#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER     26
+#define MV88E1XXX_EXT_PHY_SPECIFIC_STATUS_REGISTER      27
+#define MV88E1XXX_VIRTUAL_CABLE_TESTER_REGISTER         28
+#define MV88E1XXX_EXTENDED_ADDR_REGISTER                29
+#define MV88E1XXX_EXTENDED_REGISTER                     30
+
+/* PHY specific control register fields */
+#define S_PSCR_MDI_XOVER_MODE    5
+#define M_PSCR_MDI_XOVER_MODE    0x3
+#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE)
+#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE)
+
+/* Extended PHY specific control register fields */
+#define S_DOWNSHIFT_ENABLE 8
+#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE)
+
+#define S_DOWNSHIFT_CNT    9
+#define M_DOWNSHIFT_CNT    0x7
+#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT)
+#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT)
+
+/* PHY specific status register fields */
+#define S_PSSR_JABBER 0
+#define V_PSSR_JABBER (1 << S_PSSR_JABBER)
+
+#define S_PSSR_POLARITY 1
+#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY)
+
+#define S_PSSR_RX_PAUSE 2
+#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE)
+
+#define S_PSSR_TX_PAUSE 3
+#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE)
+
+#define S_PSSR_ENERGY_DETECT 4
+#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT)
+
+#define S_PSSR_DOWNSHIFT_STATUS 5
+#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS)
+
+#define S_PSSR_MDI 6
+#define V_PSSR_MDI (1 << S_PSSR_MDI)
+
+#define S_PSSR_CABLE_LEN    7
+#define M_PSSR_CABLE_LEN    0x7
+#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN)
+#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN)
+
+#define S_PSSR_LINK 10
+#define V_PSSR_LINK (1 << S_PSSR_LINK)
+
+#define S_PSSR_STATUS_RESOLVED 11
+#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED)
+
+#define S_PSSR_PAGE_RECEIVED 12
+#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED)
+
+#define S_PSSR_DUPLEX 13
+#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX)
+
+#define S_PSSR_SPEED    14
+#define M_PSSR_SPEED    0x3
+#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED)
+#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED)
+
+#endif