summaryrefslogtreecommitdiffstats
path: root/drivers/net/enc28j60.c
diff options
context:
space:
mode:
authorBaruch Siach <baruch@tkos.co.il>2008-12-18 19:39:14 -0800
committerDavid S. Miller <davem@davemloft.net>2008-12-18 22:27:39 -0800
commit5664dd5561850df580414783cf3c8e0aa834c62e (patch)
treeaac02f7e39a2adbac4920c131c1a49f6ddb571e2 /drivers/net/enc28j60.c
parentb88a2a22c6670c31586d1a716255eae4c320b363 (diff)
downloadlinux-5664dd5561850df580414783cf3c8e0aa834c62e.tar.bz2
enc28j60: reduce the number of spi transfers in enc28j60_set_bank()
A major source of overhead in the enc28j60 driver is the SPI transfers. Each SPI transfer entails two kernel thread context switches. One major source of SPI transfers is the enc28j60_set_bank() functions which runs before every register access. This patch reduces the number of SPI transfers that enc28j60_set_bank() performs in two ways: 1. removes unnecessary bank switch for the registers that are present in all banks 2. when switching from banks 0 or 3 to banks 1 or 2 (i.e. only one bit changes) enc28j60_set_bank() does only one SPI transfer instead of two According to my tests these changes reduce the number of SPI transfers in about 25%. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/enc28j60.c')
-rw-r--r--drivers/net/enc28j60.c30
1 files changed, 23 insertions, 7 deletions
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 535e14094971..b0ef46c51a9d 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -196,16 +196,32 @@ static void enc28j60_soft_reset(struct enc28j60_net *priv)
*/
static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
{
- if ((addr & BANK_MASK) != priv->bank) {
- u8 b = (addr & BANK_MASK) >> 5;
+ u8 b = (addr & BANK_MASK) >> 5;
- if (b != (ECON1_BSEL1 | ECON1_BSEL0))
+ /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
+ * are present in all banks, no need to switch bank
+ */
+ if (addr >= EIE && addr <= ECON1)
+ return;
+
+ /* Clear or set each bank selection bit as needed */
+ if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
+ if (b & ECON1_BSEL0)
+ spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
+ ECON1_BSEL0);
+ else
+ spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
+ ECON1_BSEL0);
+ }
+ if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
+ if (b & ECON1_BSEL1)
+ spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
+ ECON1_BSEL1);
+ else
spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
- ECON1_BSEL1 | ECON1_BSEL0);
- if (b != 0)
- spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, b);
- priv->bank = (addr & BANK_MASK);
+ ECON1_BSEL1);
}
+ priv->bank = b;
}
/*