net: dsa: Add Vitesse VSC73xx DSA router driver

This adds a DSA driver for:

Vitesse VSC7385 SparX-G5 5-port Integrated Gigabit Ethernet Switch
Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch

These switches have a built-in 8051 CPU and can download and execute
firmware in this CPU. They can also be configured to use an external
CPU handling the switch in a memory-mapped manner by connecting to
that external CPU's memory bus.

This driver (currently) only takes control of the switch chip over
SPI and configures it to route packages around when connected to a
CPU port. The chip has embedded PHYs and VLAN support so we model it
using DSA as a best fit so we can easily add VLAN support and maybe
later also exploit the internal frame header to get more direct
control over the switch.

The four built-in GPIO lines are exposed using a standard GPIO chip.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 1376 insertions, 0 deletions

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 2b81b97e994f..733653d8359a 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -76,4 +76,15 @@ config NET_DSA_SMSC_LAN9303_MDIO
 	  Enable access functions if the SMSC/Microchip LAN9303 is configured
 	  for MDIO managed mode.
 
+config NET_DSA_VITESSE_VSC73XX
+	tristate "Vitesse VSC7385/7388/7395/7398 support"
+	depends on OF && SPI
+	depends on NET_DSA
+	select FIXED_PHY
+	select VITESSE_PHY
+	select GPIOLIB
+	---help---
+	  This enables support for the Vitesse VSC7385, VSC7388,
+	  VSC7395 and VSC7398 SparX integrated ethernet switches.
+
 endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 15c2a831edf1..d4f873ae2f6a 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
+obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o
 obj-y				+= b53/
 obj-y				+= microchip/
 obj-y				+= mv88e6xxx/
diff --git a/drivers/net/dsa/vitesse-vsc73xx.c b/drivers/net/dsa/vitesse-vsc73xx.c
new file mode 100644
index 000000000000..a4fc260006de
--- /dev/null
+++ b/drivers/net/dsa/vitesse-vsc73xx.c
@@ -0,0 +1,1364 @@
+// SPDX-License-Identifier: GPL-2.0
+/* DSA driver for:
+ * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+ * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+ *
+ * These switches have a built-in 8051 CPU and can download and execute a
+ * firmware in this CPU. They can also be configured to use an external CPU
+ * handling the switch in a memory-mapped manner by connecting to that external
+ * CPU's memory bus.
+ *
+ * This driver (currently) only takes control of the switch chip over SPI and
+ * configures it to route packages around when connected to a CPU port. The
+ * chip has embedded PHYs and VLAN support so we model it using DSA.
+ *
+ * Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
+ * Includes portions of code from the firmware uploader by:
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/random.h>
+#include <net/dsa.h>
+
+#define VSC73XX_BLOCK_MAC	0x1 /* Subblocks 0-4, 6 (CPU port) */
+#define VSC73XX_BLOCK_ANALYZER	0x2 /* Only subblock 0 */
+#define VSC73XX_BLOCK_MII	0x3 /* Subblocks 0 and 1 */
+#define VSC73XX_BLOCK_MEMINIT	0x3 /* Only subblock 2 */
+#define VSC73XX_BLOCK_CAPTURE	0x4 /* Only subblock 2 */
+#define VSC73XX_BLOCK_ARBITER	0x5 /* Only subblock 0 */
+#define VSC73XX_BLOCK_SYSTEM	0x7 /* Only subblock 0 */
+
+#define CPU_PORT	6 /* CPU port */
+
+/* MAC Block registers */
+#define VSC73XX_MAC_CFG		0x00
+#define VSC73XX_MACHDXGAP	0x02
+#define VSC73XX_FCCONF		0x04
+#define VSC73XX_FCMACHI		0x08
+#define VSC73XX_FCMACLO		0x0c
+#define VSC73XX_MAXLEN		0x10
+#define VSC73XX_ADVPORTM	0x19
+#define VSC73XX_TXUPDCFG	0x24
+#define VSC73XX_TXQ_SELECT_CFG	0x28
+#define VSC73XX_RXOCT		0x50
+#define VSC73XX_TXOCT		0x51
+#define VSC73XX_C_RX0		0x52
+#define VSC73XX_C_RX1		0x53
+#define VSC73XX_C_RX2		0x54
+#define VSC73XX_C_TX0		0x55
+#define VSC73XX_C_TX1		0x56
+#define VSC73XX_C_TX2		0x57
+#define VSC73XX_C_CFG		0x58
+#define VSC73XX_CAT_DROP	0x6e
+#define VSC73XX_CAT_PR_MISC_L2	0x6f
+#define VSC73XX_CAT_PR_USR_PRIO	0x75
+#define VSC73XX_Q_MISC_CONF	0xdf
+
+/* MAC_CFG register bits */
+#define VSC73XX_MAC_CFG_WEXC_DIS	BIT(31)
+#define VSC73XX_MAC_CFG_PORT_RST	BIT(29)
+#define VSC73XX_MAC_CFG_TX_EN		BIT(28)
+#define VSC73XX_MAC_CFG_SEED_LOAD	BIT(27)
+#define VSC73XX_MAC_CFG_SEED_MASK	GENMASK(26, 19)
+#define VSC73XX_MAC_CFG_SEED_OFFSET	19
+#define VSC73XX_MAC_CFG_FDX		BIT(18)
+#define VSC73XX_MAC_CFG_GIGA_MODE	BIT(17)
+#define VSC73XX_MAC_CFG_RX_EN		BIT(16)
+#define VSC73XX_MAC_CFG_VLAN_DBLAWR	BIT(15)
+#define VSC73XX_MAC_CFG_VLAN_AWR	BIT(14)
+#define VSC73XX_MAC_CFG_100_BASE_T	BIT(13) /* Not in manual */
+#define VSC73XX_MAC_CFG_TX_IPG_MASK	GENMASK(10, 6)
+#define VSC73XX_MAC_CFG_TX_IPG_OFFSET	6
+#define VSC73XX_MAC_CFG_TX_IPG_1000M	(6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
+#define VSC73XX_MAC_CFG_TX_IPG_100_10M	(17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET)
+#define VSC73XX_MAC_CFG_MAC_RX_RST	BIT(5)
+#define VSC73XX_MAC_CFG_MAC_TX_RST	BIT(4)
+#define VSC73XX_MAC_CFG_CLK_SEL_MASK	GENMASK(2, 0)
+#define VSC73XX_MAC_CFG_CLK_SEL_OFFSET	0
+#define VSC73XX_MAC_CFG_CLK_SEL_1000M	1
+#define VSC73XX_MAC_CFG_CLK_SEL_100M	2
+#define VSC73XX_MAC_CFG_CLK_SEL_10M	3
+#define VSC73XX_MAC_CFG_CLK_SEL_EXT	4
+
+#define VSC73XX_MAC_CFG_1000M_F_PHY	(VSC73XX_MAC_CFG_FDX | \
+					 VSC73XX_MAC_CFG_GIGA_MODE | \
+					 VSC73XX_MAC_CFG_TX_IPG_1000M | \
+					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_100_10M_F_PHY	(VSC73XX_MAC_CFG_FDX | \
+					 VSC73XX_MAC_CFG_TX_IPG_100_10M | \
+					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_100_10M_H_PHY	(VSC73XX_MAC_CFG_TX_IPG_100_10M | \
+					 VSC73XX_MAC_CFG_CLK_SEL_EXT)
+#define VSC73XX_MAC_CFG_1000M_F_RGMII	(VSC73XX_MAC_CFG_FDX | \
+					 VSC73XX_MAC_CFG_GIGA_MODE | \
+					 VSC73XX_MAC_CFG_TX_IPG_1000M | \
+					 VSC73XX_MAC_CFG_CLK_SEL_1000M)
+#define VSC73XX_MAC_CFG_RESET		(VSC73XX_MAC_CFG_PORT_RST | \
+					 VSC73XX_MAC_CFG_MAC_RX_RST | \
+					 VSC73XX_MAC_CFG_MAC_TX_RST)
+
+/* Flow control register bits */
+#define VSC73XX_FCCONF_ZERO_PAUSE_EN	BIT(17)
+#define VSC73XX_FCCONF_FLOW_CTRL_OBEY	BIT(16)
+#define VSC73XX_FCCONF_PAUSE_VAL_MASK	GENMASK(15, 0)
+
+/* ADVPORTM advanced port setup register bits */
+#define VSC73XX_ADVPORTM_IFG_PPM	BIT(7)
+#define VSC73XX_ADVPORTM_EXC_COL_CONT	BIT(6)
+#define VSC73XX_ADVPORTM_EXT_PORT	BIT(5)
+#define VSC73XX_ADVPORTM_INV_GTX	BIT(4)
+#define VSC73XX_ADVPORTM_ENA_GTX	BIT(3)
+#define VSC73XX_ADVPORTM_DDR_MODE	BIT(2)
+#define VSC73XX_ADVPORTM_IO_LOOPBACK	BIT(1)
+#define VSC73XX_ADVPORTM_HOST_LOOPBACK	BIT(0)
+
+/* CAT_DROP categorizer frame dropping register bits */
+#define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA	BIT(6)
+#define VSC73XX_CAT_DROP_FWD_CTRL_ENA		BIT(4)
+#define VSC73XX_CAT_DROP_FWD_PAUSE_ENA		BIT(3)
+#define VSC73XX_CAT_DROP_UNTAGGED_ENA		BIT(2)
+#define VSC73XX_CAT_DROP_TAGGED_ENA		BIT(1)
+#define VSC73XX_CAT_DROP_NULL_MAC_ENA		BIT(0)
+
+#define VSC73XX_Q_MISC_CONF_EXTENT_MEM		BIT(31)
+#define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK	GENMASK(4, 1)
+#define VSC73XX_Q_MISC_CONF_EARLY_TX_512	(1 << 1)
+#define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE	BIT(0)
+
+/* Frame analyzer block 2 registers */
+#define VSC73XX_STORMLIMIT	0x02
+#define VSC73XX_ADVLEARN	0x03
+#define VSC73XX_IFLODMSK	0x04
+#define VSC73XX_VLANMASK	0x05
+#define VSC73XX_MACHDATA	0x06
+#define VSC73XX_MACLDATA	0x07
+#define VSC73XX_ANMOVED		0x08
+#define VSC73XX_ANAGEFIL	0x09
+#define VSC73XX_ANEVENTS	0x0a
+#define VSC73XX_ANCNTMASK	0x0b
+#define VSC73XX_ANCNTVAL	0x0c
+#define VSC73XX_LEARNMASK	0x0d
+#define VSC73XX_UFLODMASK	0x0e
+#define VSC73XX_MFLODMASK	0x0f
+#define VSC73XX_RECVMASK	0x10
+#define VSC73XX_AGGRCTRL	0x20
+#define VSC73XX_AGGRMSKS	0x30 /* Until 0x3f */
+#define VSC73XX_DSTMASKS	0x40 /* Until 0x7f */
+#define VSC73XX_SRCMASKS	0x80 /* Until 0x87 */
+#define VSC73XX_CAPENAB		0xa0
+#define VSC73XX_MACACCESS	0xb0
+#define VSC73XX_IPMCACCESS	0xb1
+#define VSC73XX_MACTINDX	0xc0
+#define VSC73XX_VLANACCESS	0xd0
+#define VSC73XX_VLANTIDX	0xe0
+#define VSC73XX_AGENCTRL	0xf0
+#define VSC73XX_CAPRST		0xff
+
+#define VSC73XX_MACACCESS_CPU_COPY		BIT(14)
+#define VSC73XX_MACACCESS_FWD_KILL		BIT(13)
+#define VSC73XX_MACACCESS_IGNORE_VLAN		BIT(12)
+#define VSC73XX_MACACCESS_AGED_FLAG		BIT(11)
+#define VSC73XX_MACACCESS_VALID			BIT(10)
+#define VSC73XX_MACACCESS_LOCKED		BIT(9)
+#define VSC73XX_MACACCESS_DEST_IDX_MASK		GENMASK(8, 3)
+#define VSC73XX_MACACCESS_CMD_MASK		GENMASK(2, 0)
+#define VSC73XX_MACACCESS_CMD_IDLE		0
+#define VSC73XX_MACACCESS_CMD_LEARN		1
+#define VSC73XX_MACACCESS_CMD_FORGET		2
+#define VSC73XX_MACACCESS_CMD_AGE_TABLE		3
+#define VSC73XX_MACACCESS_CMD_FLUSH_TABLE	4
+#define VSC73XX_MACACCESS_CMD_CLEAR_TABLE	5
+#define VSC73XX_MACACCESS_CMD_READ_ENTRY	6
+#define VSC73XX_MACACCESS_CMD_WRITE_ENTRY	7
+
+#define VSC73XX_VLANACCESS_LEARN_DISABLED	BIT(30)
+#define VSC73XX_VLANACCESS_VLAN_MIRROR		BIT(29)
+#define VSC73XX_VLANACCESS_VLAN_SRC_CHECK	BIT(28)
+#define VSC73XX_VLANACCESS_VLAN_PORT_MASK	GENMASK(9, 2)
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK	GENMASK(2, 0)
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE	0
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY	1
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY	2
+#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE	3
+
+/* MII block 3 registers */
+#define VSC73XX_MII_STAT	0x0
+#define VSC73XX_MII_CMD		0x1
+#define VSC73XX_MII_DATA	0x2
+
+/* Arbiter block 5 registers */
+#define VSC73XX_ARBEMPTY		0x0c
+#define VSC73XX_ARBDISC			0x0e
+#define VSC73XX_SBACKWDROP		0x12
+#define VSC73XX_DBACKWDROP		0x13
+#define VSC73XX_ARBBURSTPROB		0x15
+
+/* System block 7 registers */
+#define VSC73XX_ICPU_SIPAD		0x01
+#define VSC73XX_GMIIDELAY		0x05
+#define VSC73XX_ICPU_CTRL		0x10
+#define VSC73XX_ICPU_ADDR		0x11
+#define VSC73XX_ICPU_SRAM		0x12
+#define VSC73XX_HWSEM			0x13
+#define VSC73XX_GLORESET		0x14
+#define VSC73XX_ICPU_MBOX_VAL		0x15
+#define VSC73XX_ICPU_MBOX_SET		0x16
+#define VSC73XX_ICPU_MBOX_CLR		0x17
+#define VSC73XX_CHIPID			0x18
+#define VSC73XX_GPIO			0x34
+
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE	0
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS	1
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS	2
+#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS	3
+
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE	(0 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS	(1 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS	(2 << 4)
+#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS	(3 << 4)
+
+#define VSC73XX_ICPU_CTRL_WATCHDOG_RST	BIT(31)
+#define VSC73XX_ICPU_CTRL_CLK_DIV_MASK	GENMASK(12, 8)
+#define VSC73XX_ICPU_CTRL_SRST_HOLD	BIT(7)
+#define VSC73XX_ICPU_CTRL_ICPU_PI_EN	BIT(6)
+#define VSC73XX_ICPU_CTRL_BOOT_EN	BIT(3)
+#define VSC73XX_ICPU_CTRL_EXT_ACC_EN	BIT(2)
+#define VSC73XX_ICPU_CTRL_CLK_EN	BIT(1)
+#define VSC73XX_ICPU_CTRL_SRST		BIT(0)
+
+#define VSC73XX_CHIPID_ID_SHIFT		12
+#define VSC73XX_CHIPID_ID_MASK		0xffff
+#define VSC73XX_CHIPID_REV_SHIFT	28
+#define VSC73XX_CHIPID_REV_MASK		0xf
+#define VSC73XX_CHIPID_ID_7385		0x7385
+#define VSC73XX_CHIPID_ID_7388		0x7388
+#define VSC73XX_CHIPID_ID_7395		0x7395
+#define VSC73XX_CHIPID_ID_7398		0x7398
+
+#define VSC73XX_GLORESET_STROBE		BIT(4)
+#define VSC73XX_GLORESET_ICPU_LOCK	BIT(3)
+#define VSC73XX_GLORESET_MEM_LOCK	BIT(2)
+#define VSC73XX_GLORESET_PHY_RESET	BIT(1)
+#define VSC73XX_GLORESET_MASTER_RESET	BIT(0)
+
+#define VSC73XX_CMD_MODE_READ		0
+#define VSC73XX_CMD_MODE_WRITE		1
+#define VSC73XX_CMD_MODE_SHIFT		4
+#define VSC73XX_CMD_BLOCK_SHIFT		5
+#define VSC73XX_CMD_BLOCK_MASK		0x7
+#define VSC73XX_CMD_SUBBLOCK_MASK	0xf
+
+#define VSC7385_CLOCK_DELAY		((3 << 4) | 3)
+#define VSC7385_CLOCK_DELAY_MASK	((3 << 4) | 3)
+
+#define VSC73XX_ICPU_CTRL_STOP	(VSC73XX_ICPU_CTRL_SRST_HOLD | \
+				 VSC73XX_ICPU_CTRL_BOOT_EN | \
+				 VSC73XX_ICPU_CTRL_EXT_ACC_EN)
+
+#define VSC73XX_ICPU_CTRL_START	(VSC73XX_ICPU_CTRL_CLK_DIV | \
+				 VSC73XX_ICPU_CTRL_BOOT_EN | \
+				 VSC73XX_ICPU_CTRL_CLK_EN | \
+				 VSC73XX_ICPU_CTRL_SRST)
+
+/**
+ * struct vsc73xx - VSC73xx state container
+ */
+struct vsc73xx {
+	struct device		*dev;
+	struct gpio_desc	*reset;
+	struct spi_device	*spi;
+	struct dsa_switch	*ds;
+	struct gpio_chip	gc;
+	u16			chipid;
+	u8			addr[ETH_ALEN];
+	struct mutex		lock; /* Protects SPI traffic */
+};
+
+#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385)
+#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388)
+#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395)
+#define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
+#define IS_739X(a) (IS_7395(a) || IS_7398(a))
+
+struct vsc73xx_counter {
+	u8 counter;
+	const char *name;
+};
+
+/* Counters are named according to the MIB standards where applicable.
+ * Some counters are custom, non-standard. The standard counters are
+ * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex
+ * 30A Counters.
+ */
+static const struct vsc73xx_counter vsc73xx_rx_counters[] = {
+	{ 0, "RxEtherStatsPkts" },
+	{ 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */
+	{ 2, "RxTotalErrorPackets" }, /* non-standard counter */
+	{ 3, "RxEtherStatsBroadcastPkts" },
+	{ 4, "RxEtherStatsMulticastPkts" },
+	{ 5, "RxEtherStatsPkts64Octets" },
+	{ 6, "RxEtherStatsPkts65to127Octets" },
+	{ 7, "RxEtherStatsPkts128to255Octets" },
+	{ 8, "RxEtherStatsPkts256to511Octets" },
+	{ 9, "RxEtherStatsPkts512to1023Octets" },
+	{ 10, "RxEtherStatsPkts1024to1518Octets" },
+	{ 11, "RxJumboFrames" }, /* non-standard counter */
+	{ 12, "RxaPauseMACControlFramesTransmitted" },
+	{ 13, "RxFIFODrops" }, /* non-standard counter */
+	{ 14, "RxBackwardDrops" }, /* non-standard counter */
+	{ 15, "RxClassifierDrops" }, /* non-standard counter */
+	{ 16, "RxEtherStatsCRCAlignErrors" },
+	{ 17, "RxEtherStatsUndersizePkts" },
+	{ 18, "RxEtherStatsOversizePkts" },
+	{ 19, "RxEtherStatsFragments" },
+	{ 20, "RxEtherStatsJabbers" },
+	{ 21, "RxaMACControlFramesReceived" },
+	/* 22-24 are undefined */
+	{ 25, "RxaFramesReceivedOK" },
+	{ 26, "RxQoSClass0" }, /* non-standard counter */
+	{ 27, "RxQoSClass1" }, /* non-standard counter */
+	{ 28, "RxQoSClass2" }, /* non-standard counter */
+	{ 29, "RxQoSClass3" }, /* non-standard counter */
+};
+
+static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
+	{ 0, "TxEtherStatsPkts" },
+	{ 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */
+	{ 2, "TxTotalErrorPackets" }, /* non-standard counter */
+	{ 3, "TxEtherStatsBroadcastPkts" },
+	{ 4, "TxEtherStatsMulticastPkts" },
+	{ 5, "TxEtherStatsPkts64Octets" },
+	{ 6, "TxEtherStatsPkts65to127Octets" },
+	{ 7, "TxEtherStatsPkts128to255Octets" },
+	{ 8, "TxEtherStatsPkts256to511Octets" },
+	{ 9, "TxEtherStatsPkts512to1023Octets" },
+	{ 10, "TxEtherStatsPkts1024to1518Octets" },
+	{ 11, "TxJumboFrames" }, /* non-standard counter */
+	{ 12, "TxaPauseMACControlFramesTransmitted" },
+	{ 13, "TxFIFODrops" }, /* non-standard counter */
+	{ 14, "TxDrops" }, /* non-standard counter */
+	{ 15, "TxEtherStatsCollisions" },
+	{ 16, "TxEtherStatsCRCAlignErrors" },
+	{ 17, "TxEtherStatsUndersizePkts" },
+	{ 18, "TxEtherStatsOversizePkts" },
+	{ 19, "TxEtherStatsFragments" },
+	{ 20, "TxEtherStatsJabbers" },
+	/* 21-24 are undefined */
+	{ 25, "TxaFramesReceivedOK" },
+	{ 26, "TxQoSClass0" }, /* non-standard counter */
+	{ 27, "TxQoSClass1" }, /* non-standard counter */
+	{ 28, "TxQoSClass2" }, /* non-standard counter */
+	{ 29, "TxQoSClass3" }, /* non-standard counter */
+};
+
+static int vsc73xx_is_addr_valid(u8 block, u8 subblock)
+{
+	switch (block) {
+	case VSC73XX_BLOCK_MAC:
+		switch (subblock) {
+		case 0 ... 4:
+		case 6:
+			return 1;
+		}
+		break;
+
+	case VSC73XX_BLOCK_ANALYZER:
+	case VSC73XX_BLOCK_SYSTEM:
+		switch (subblock) {
+		case 0:
+			return 1;
+		}
+		break;
+
+	case VSC73XX_BLOCK_MII:
+	case VSC73XX_BLOCK_CAPTURE:
+	case VSC73XX_BLOCK_ARBITER:
+		switch (subblock) {
+		case 0 ... 1:
+			return 1;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock)
+{
+	u8 ret;
+
+	ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
+	ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
+	ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
+
+	return ret;
+}
+
+static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+			u32 *val)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	u8 cmd[4];
+	u8 buf[4];
+	int ret;
+
+	if (!vsc73xx_is_addr_valid(block, subblock))
+		return -EINVAL;
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = cmd;
+	t[0].len = sizeof(cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = sizeof(buf);
+	spi_message_add_tail(&t[1], &m);
+
+	cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
+	cmd[1] = reg;
+	cmd[2] = 0;
+	cmd[3] = 0;
+
+	mutex_lock(&vsc->lock);
+	ret = spi_sync(vsc->spi, &m);
+	mutex_unlock(&vsc->lock);
+
+	if (ret)
+		return ret;
+
+	*val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
+
+	return 0;
+}
+
+static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
+			 u32 val)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	u8 cmd[2];
+	u8 buf[4];
+	int ret;
+
+	if (!vsc73xx_is_addr_valid(block, subblock))
+		return -EINVAL;
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = cmd;
+	t[0].len = sizeof(cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = sizeof(buf);
+	spi_message_add_tail(&t[1], &m);
+
+	cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
+	cmd[1] = reg;
+
+	buf[0] = (val >> 24) & 0xff;
+	buf[1] = (val >> 16) & 0xff;
+	buf[2] = (val >> 8) & 0xff;
+	buf[3] = val & 0xff;
+
+	mutex_lock(&vsc->lock);
+	ret = spi_sync(vsc->spi, &m);
+	mutex_unlock(&vsc->lock);
+
+	return ret;
+}
+
+static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock,
+			       u8 reg, u32 mask, u32 val)
+{
+	u32 tmp, orig;
+	int ret;
+
+	/* Same read-modify-write algorithm as e.g. regmap */
+	ret = vsc73xx_read(vsc, block, subblock, reg, &orig);
+	if (ret)
+		return ret;
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+	return vsc73xx_write(vsc, block, subblock, reg, tmp);
+}
+
+static int vsc73xx_detect(struct vsc73xx *vsc)
+{
+	bool icpu_si_boot_en;
+	bool icpu_pi_en;
+	u32 val;
+	u32 rev;
+	int ret;
+	u32 id;
+
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			   VSC73XX_ICPU_MBOX_VAL, &val);
+	if (ret) {
+		dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret);
+		return ret;
+	}
+
+	if (val == 0xffffffff) {
+		dev_info(vsc->dev, "chip seems dead, assert reset\n");
+		gpiod_set_value_cansleep(vsc->reset, 1);
+		/* Reset pulse should be 20ns minimum, according to datasheet
+		 * table 245, so 10us should be fine
+		 */
+		usleep_range(10, 100);
+		gpiod_set_value_cansleep(vsc->reset, 0);
+		/* Wait 20ms according to datasheet table 245 */
+		msleep(20);
+
+		ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				   VSC73XX_ICPU_MBOX_VAL, &val);
+		if (val == 0xffffffff) {
+			dev_err(vsc->dev, "seems not to help, giving up\n");
+			return -ENODEV;
+		}
+	}
+
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			   VSC73XX_CHIPID, &val);
+	if (ret) {
+		dev_err(vsc->dev, "unable to read chip id (%d)\n", ret);
+		return ret;
+	}
+
+	id = (val >> VSC73XX_CHIPID_ID_SHIFT) &
+		VSC73XX_CHIPID_ID_MASK;
+	switch (id) {
+	case VSC73XX_CHIPID_ID_7385:
+	case VSC73XX_CHIPID_ID_7388:
+	case VSC73XX_CHIPID_ID_7395:
+	case VSC73XX_CHIPID_ID_7398:
+		break;
+	default:
+		dev_err(vsc->dev, "unsupported chip, id=%04x\n", id);
+		return -ENODEV;
+	}
+
+	vsc->chipid = id;
+	rev = (val >> VSC73XX_CHIPID_REV_SHIFT) &
+		VSC73XX_CHIPID_REV_MASK;
+	dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev);
+
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			   VSC73XX_ICPU_CTRL, &val);
+	if (ret) {
+		dev_err(vsc->dev, "unable to read iCPU control\n");
+		return ret;
+	}
+
+	/* The iCPU can always be used but can boot in different ways.
+	 * If it is initially disabled and has no external memory,
+	 * we are in control and can do whatever we like, else we
+	 * are probably in trouble (we need some way to communicate
+	 * with the running firmware) so we bail out for now.
+	 */
+	icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN);
+	icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN);
+	if (icpu_si_boot_en && icpu_pi_en) {
+		dev_err(vsc->dev,
+			"iCPU enabled boots from SI, has external memory\n");
+		dev_err(vsc->dev, "no idea how to deal with this\n");
+		return -ENODEV;
+	}
+	if (icpu_si_boot_en && !icpu_pi_en) {
+		dev_err(vsc->dev,
+			"iCPU enabled boots from SI, no external memory\n");
+		dev_err(vsc->dev, "no idea how to deal with this\n");
+		return -ENODEV;
+	}
+	if (!icpu_si_boot_en && icpu_pi_en) {
+		dev_err(vsc->dev,
+			"iCPU enabled, boots from PI external memory\n");
+		dev_err(vsc->dev, "no idea how to deal with this\n");
+		return -ENODEV;
+	}
+	/* !icpu_si_boot_en && !cpu_pi_en */
+	dev_info(vsc->dev, "iCPU disabled, no external memory\n");
+
+	return 0;
+}
+
+static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+	struct vsc73xx *vsc = ds->priv;
+	u32 cmd;
+	u32 val;
+	int ret;
+
+	/* Setting bit 26 means "read" */
+	cmd = BIT(26) | (phy << 21) | (regnum << 16);
+	ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
+	if (ret)
+		return ret;
+	msleep(2);
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val);
+	if (ret)
+		return ret;
+	if (val & BIT(16)) {
+		dev_err(vsc->dev, "reading reg %02x from phy%d failed\n",
+			regnum, phy);
+		return -EIO;
+	}
+	val &= 0xFFFFU;
+
+	dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n",
+		regnum, phy, val);
+
+	return val;
+}
+
+static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum,
+			     u16 val)
+{
+	struct vsc73xx *vsc = ds->priv;
+	u32 cmd;
+	int ret;
+
+	/* It was found through tedious experiments that this router
+	 * chip really hates to have it's PHYs reset. They
+	 * never recover if that happens: autonegotiation stops
+	 * working after a reset. Just filter out this command.
+	 * (Resetting the whole chip is OK.)
+	 */
+	if (regnum == 0 && (val & BIT(15))) {
+		dev_info(vsc->dev, "reset PHY - disallowed\n");
+		return 0;
+	}
+
+	cmd = (phy << 21) | (regnum << 16);
+	ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd);
+	if (ret)
+		return ret;
+
+	dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n",
+		val, regnum, phy);
+	return 0;
+}
+
+static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
+						      int port)
+{
+	/* The switch internally uses a 8 byte header with length,
+	 * source port, tag, LPA and priority. This is supposedly
+	 * only accessible when operating the switch using the internal
+	 * CPU or with an external CPU mapping the device in, but not
+	 * when operating the switch over SPI and putting frames in/out
+	 * on port 6 (the CPU port). So far we must assume that we
+	 * cannot access the tag. (See "Internal frame header" section
+	 * 3.9.1 in the manual.)
+	 */
+	return DSA_TAG_PROTO_NONE;
+}
+
+static int vsc73xx_setup(struct dsa_switch *ds)
+{
+	struct vsc73xx *vsc = ds->priv;
+	int i;
+
+	dev_info(vsc->dev, "set up the switch\n");
+
+	/* Issue RESET */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
+		      VSC73XX_GLORESET_MASTER_RESET);
+	usleep_range(125, 200);
+
+	/* Initialize memory, initialize RAM bank 0..15 except 6 and 7
+	 * This sequence appears in the
+	 * VSC7385 SparX-G5 datasheet section 6.6.1
+	 * VSC7395 SparX-G5e datasheet section 6.6.1
+	 * "initialization sequence".
+	 * No explanation is given to the 0x1010400 magic number.
+	 */
+	for (i = 0; i <= 15; i++) {
+		if (i != 6 && i != 7) {
+			vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
+				      2,
+				      0, 0x1010400 + i);
+			mdelay(1);
+		}
+	}
+	mdelay(30);
+
+	/* Clear MAC table */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+		      VSC73XX_MACACCESS,
+		      VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
+
+	/* Clear VLAN table */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+		      VSC73XX_VLANACCESS,
+		      VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
+
+	msleep(40);
+
+	/* Use 20KiB buffers on all ports on VSC7395
+	 * The VSC7385 has 16KiB buffers and that is the
+	 * default if we don't set this up explicitly.
+	 * Port "31" is "all ports".
+	 */
+	if (IS_739X(vsc))
+		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
+			      VSC73XX_Q_MISC_CONF,
+			      VSC73XX_Q_MISC_CONF_EXTENT_MEM);
+
+	/* Put all ports into reset until enabled */
+	for (i = 0; i < 7; i++) {
+		if (i == 5)
+			continue;
+		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
+			      VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
+	}
+
+	/* MII delay, set both GTX and RX delay to 2 ns */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
+		      VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
+		      VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
+	/* Enable reception of frames on all ports */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
+		      0x5f);
+	/* IP multicast flood mask (table 144) */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
+		      0xff);
+
+	mdelay(50);
+
+	/* Release reset from the internal PHYs */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
+		      VSC73XX_GLORESET_PHY_RESET);
+
+	udelay(4);
+
+	return 0;
+}
+
+static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
+{
+	u32 val;
+
+	/* MAC configure, first reset the port and then write defaults */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_MAC_CFG,
+		      VSC73XX_MAC_CFG_RESET);
+
+	/* Take up the port in 1Gbit mode by default, this will be
+	 * augmented after auto-negotiation on the PHY-facing
+	 * ports.
+	 */
+	if (port == CPU_PORT)
+		val = VSC73XX_MAC_CFG_1000M_F_RGMII;
+	else
+		val = VSC73XX_MAC_CFG_1000M_F_PHY;
+
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_MAC_CFG,
+		      val |
+		      VSC73XX_MAC_CFG_TX_EN |
+		      VSC73XX_MAC_CFG_RX_EN);
+
+	/* Max length, we can do up to 9.6 KiB, so allow that.
+	 * According to application not "VSC7398 Jumbo Frames" setting
+	 * up the MTU to 9.6 KB does not affect the performance on standard
+	 * frames, so just enable it. It is clear from the application note
+	 * that "9.6 kilobytes" == 9600 bytes.
+	 */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_MAXLEN, 9600);
+
+	/* Flow control for the CPU port:
+	 * Use a zero delay pause frame when pause condition is left
+	 * Obey pause control frames
+	 */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_FCCONF,
+		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
+		      VSC73XX_FCCONF_FLOW_CTRL_OBEY);
+
+	/* Issue pause control frames on PHY facing ports.
+	 * Allow early initiation of MAC transmission if the amount
+	 * of egress data is below 512 bytes on CPU port.
+	 * FIXME: enable 20KiB buffers?
+	 */
+	if (port == CPU_PORT)
+		val = VSC73XX_Q_MISC_CONF_EARLY_TX_512;
+	else
+		val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE;
+	val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM;
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_Q_MISC_CONF,
+		      val);
+
+	/* Flow control MAC: a MAC address used in flow control frames */
+	val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]);
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_FCMACHI,
+		      val);
+	val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]);
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_FCMACLO,
+		      val);
+
+	/* Tell the categorizer to forward pause frames, not control
+	 * frame. Do not drop anything.
+	 */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port,
+		      VSC73XX_CAT_DROP,
+		      VSC73XX_CAT_DROP_FWD_PAUSE_ENA);
+
+	/* Clear all counters */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+		      port, VSC73XX_C_RX0, 0);
+}
+
+static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
+				       int port, struct phy_device *phydev,
+				       u32 initval)
+{
+	u32 val = initval;
+	u8 seed;
+
+	/* Reset this port FIXME: break out subroutine */
+	val |= VSC73XX_MAC_CFG_RESET;
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+	/* Seed the port randomness with randomness */
+	get_random_bytes(&seed, 1);
+	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
+	val |= VSC73XX_MAC_CFG_SEED_LOAD;
+	val |= VSC73XX_MAC_CFG_WEXC_DIS;
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+	/* Flow control for the PHY facing ports:
+	 * Use a zero delay pause frame when pause condition is left
+	 * Obey pause control frames
+	 * When generating pause frames, use 0xff as pause value
+	 */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
+		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
+		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
+		      0xff);
+
+	/* Disallow backward dropping of frames from this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_SBACKWDROP, BIT(port), 0);
+
+	/* Enable TX, RX, deassert reset, stop loading seed */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+			    VSC73XX_MAC_CFG,
+			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
+			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
+			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
+}
+
+static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
+				struct phy_device *phydev)
+{
+	struct vsc73xx *vsc = ds->priv;
+	u32 val;
+
+	/* Special handling of the CPU-facing port */
+	if (port == CPU_PORT) {
+		/* Other ports are already initialized but not this one */
+		vsc73xx_init_port(vsc, CPU_PORT);
+		/* Select the external port for this interface (EXT_PORT)
+		 * Enable the GMII GTX external clock
+		 * Use double data rate (DDR mode)
+		 */
+		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC,
+			      CPU_PORT,
+			      VSC73XX_ADVPORTM,
+			      VSC73XX_ADVPORTM_EXT_PORT |
+			      VSC73XX_ADVPORTM_ENA_GTX |
+			      VSC73XX_ADVPORTM_DDR_MODE);
+	}
+
+	/* This is the MAC confiuration that always need to happen
+	 * after a PHY or the CPU port comes up or down.
+	 */
+	if (!phydev->link) {
+		int maxloop = 10;
+
+		dev_dbg(vsc->dev, "port %d: went down\n",
+			port);
+
+		/* Disable RX on this port */
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+				    VSC73XX_MAC_CFG,
+				    VSC73XX_MAC_CFG_RX_EN, 0);
+
+		/* Discard packets */
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+				    VSC73XX_ARBDISC, BIT(port), BIT(port));
+
+		/* Wait until queue is empty */
+		vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			     VSC73XX_ARBEMPTY, &val);
+		while (!(val & BIT(port))) {
+			msleep(1);
+			vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
+				     VSC73XX_ARBEMPTY, &val);
+			if (--maxloop == 0) {
+				dev_err(vsc->dev,
+					"timeout waitting for block arbiter\n");
+				/* Continue anyway */
+				break;
+			}
+		}
+
+		/* Put this port into reset */
+		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
+			      VSC73XX_MAC_CFG_RESET);
+
+		/* Accept packets again */
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+				    VSC73XX_ARBDISC, BIT(port), 0);
+
+		/* Allow backward dropping of frames from this port */
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+				    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
+
+		/* Receive mask (disable forwarding) */
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_RECVMASK, BIT(port), 0);
+
+		return;
+	}
+
+	/* Figure out what speed was negotiated */
+	if (phydev->speed == SPEED_1000) {
+		dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
+			port);
+
+		/* Set up default for internal port or external RGMII */
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+			val = VSC73XX_MAC_CFG_1000M_F_RGMII;
+		else
+			val = VSC73XX_MAC_CFG_1000M_F_PHY;
+		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+	} else if (phydev->speed == SPEED_100) {
+		if (phydev->duplex == DUPLEX_FULL) {
+			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
+			dev_dbg(vsc->dev,
+				"port %d: 100 Mbit full duplex mode\n",
+				port);
+		} else {
+			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
+			dev_dbg(vsc->dev,
+				"port %d: 100 Mbit half duplex mode\n",
+				port);
+		}
+		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+	} else if (phydev->speed == SPEED_10) {
+		if (phydev->duplex == DUPLEX_FULL) {
+			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
+			dev_dbg(vsc->dev,
+				"port %d: 10 Mbit full duplex mode\n",
+				port);
+		} else {
+			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
+			dev_dbg(vsc->dev,
+				"port %d: 10 Mbit half duplex mode\n",
+				port);
+		}
+		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
+	} else {
+		dev_err(vsc->dev,
+			"could not adjust link: unknown speed\n");
+	}
+
+	/* Enable port (forwarding) in the receieve mask */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_RECVMASK, BIT(port), BIT(port));
+}
+
+static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
+			       struct phy_device *phy)
+{
+	struct vsc73xx *vsc = ds->priv;
+
+	dev_info(vsc->dev, "enable port %d\n", port);
+	vsc73xx_init_port(vsc, port);
+
+	return 0;
+}
+
+static void vsc73xx_port_disable(struct dsa_switch *ds, int port,
+				 struct phy_device *phy)
+{
+	struct vsc73xx *vsc = ds->priv;
+
+	/* Just put the port into reset */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port,
+		      VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
+}
+
+static const struct vsc73xx_counter *
+vsc73xx_find_counter(struct vsc73xx *vsc,
+		     u8 counter,
+		     bool tx)
+{
+	const struct vsc73xx_counter *cnts;
+	int num_cnts;
+	int i;
+
+	if (tx) {
+		cnts = vsc73xx_tx_counters;
+		num_cnts = ARRAY_SIZE(vsc73xx_tx_counters);
+	} else {
+		cnts = vsc73xx_rx_counters;
+		num_cnts = ARRAY_SIZE(vsc73xx_rx_counters);
+	}
+
+	for (i = 0; i < num_cnts; i++) {
+		const struct vsc73xx_counter *cnt;
+
+		cnt = &cnts[i];
+		if (cnt->counter == counter)
+			return cnt;
+	}
+
+	return NULL;
+}
+
+void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+			 uint8_t *data)
+{
+	const struct vsc73xx_counter *cnt;
+	struct vsc73xx *vsc = ds->priv;
+	u8 indices[6];
+	int i, j;
+	u32 val;
+	int ret;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
+			   VSC73XX_C_CFG, &val);
+	if (ret)
+		return;
+
+	indices[0] = (val & 0x1f); /* RX counter 0 */
+	indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */
+	indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */
+	indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */
+	indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */
+	indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
+
+	/* The first counters is the RX octets */
+	j = 0;
+	strncpy(data + j * ETH_GSTRING_LEN,
+		"RxEtherStatsOctets", ETH_GSTRING_LEN);
+	j++;
+
+	/* Each port supports recording 3 RX counters and 3 TX counters,
+	 * figure out what counters we use in this set-up and return the
+	 * names of them. The hardware default counters will be number of
+	 * packets on RX/TX, combined broadcast+multicast packets RX/TX and
+	 * total error packets RX/TX.
+	 */
+	for (i = 0; i < 3; i++) {
+		cnt = vsc73xx_find_counter(vsc, indices[i], false);
+		if (cnt)
+			strncpy(data + j * ETH_GSTRING_LEN,
+				cnt->name, ETH_GSTRING_LEN);
+		j++;
+	}
+
+	/* TX stats begins with the number of TX octets */
+	strncpy(data + j * ETH_GSTRING_LEN,
+		"TxEtherStatsOctets", ETH_GSTRING_LEN);
+	j++;
+
+	for (i = 3; i < 6; i++) {
+		cnt = vsc73xx_find_counter(vsc, indices[i], true);
+		if (cnt)
+			strncpy(data + j * ETH_GSTRING_LEN,
+				cnt->name, ETH_GSTRING_LEN);
+		j++;
+	}
+}
+
+int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	/* We only support SS_STATS */
+	if (sset != ETH_SS_STATS)
+		return 0;
+	/* RX and TX packets, then 3 RX counters, 3 TX counters */
+	return 8;
+}
+
+void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+	struct vsc73xx *vsc = ds->priv;
+	u8 regs[] = {
+		VSC73XX_RXOCT,
+		VSC73XX_C_RX0,
+		VSC73XX_C_RX1,
+		VSC73XX_C_RX2,
+		VSC73XX_TXOCT,
+		VSC73XX_C_TX0,
+		VSC73XX_C_TX1,
+		VSC73XX_C_TX2,
+	};
+	u32 val;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port,
+				   regs[i], &val);
+		if (ret) {
+			dev_err(vsc->dev, "error reading counter %d\n", i);
+			return;
+		}
+		data[i] = val;
+	}
+}
+
+static const struct dsa_switch_ops vsc73xx_ds_ops = {
+	.get_tag_protocol = vsc73xx_get_tag_protocol,
+	.setup = vsc73xx_setup,
+	.phy_read = vsc73xx_phy_read,
+	.phy_write = vsc73xx_phy_write,
+	.adjust_link = vsc73xx_adjust_link,
+	.get_strings = vsc73xx_get_strings,
+	.get_ethtool_stats = vsc73xx_get_ethtool_stats,
+	.get_sset_count = vsc73xx_get_sset_count,
+	.port_enable = vsc73xx_port_enable,
+	.port_disable = vsc73xx_port_disable,
+};
+
+static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct vsc73xx *vsc = gpiochip_get_data(chip);
+	u32 val;
+	int ret;
+
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			   VSC73XX_GPIO, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(offset));
+}
+
+static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int val)
+{
+	struct vsc73xx *vsc = gpiochip_get_data(chip);
+	u32 tmp = val ? BIT(offset) : 0;
+
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			    VSC73XX_GPIO, BIT(offset), tmp);
+}
+
+static int vsc73xx_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned int offset, int val)
+{
+	struct vsc73xx *vsc = gpiochip_get_data(chip);
+	u32 tmp = val ? BIT(offset) : 0;
+
+	return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				   VSC73XX_GPIO, BIT(offset + 4) | BIT(offset),
+				   BIT(offset + 4) | tmp);
+}
+
+static int vsc73xx_gpio_direction_input(struct gpio_chip *chip,
+					unsigned int offset)
+{
+	struct vsc73xx *vsc = gpiochip_get_data(chip);
+
+	return  vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				    VSC73XX_GPIO, BIT(offset + 4),
+				    0);
+}
+
+static int vsc73xx_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct vsc73xx *vsc = gpiochip_get_data(chip);
+	u32 val;
+	int ret;
+
+	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			   VSC73XX_GPIO, &val);
+	if (ret)
+		return ret;
+
+	return !(val & BIT(offset + 4));
+}
+
+static int vsc73xx_gpio_probe(struct vsc73xx *vsc)
+{
+	int ret;
+
+	vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x",
+				       vsc->chipid);
+	vsc->gc.ngpio = 4;
+	vsc->gc.owner = THIS_MODULE;
+	vsc->gc.parent = vsc->dev;
+	vsc->gc.of_node = vsc->dev->of_node;
+	vsc->gc.base = -1;
+	vsc->gc.get = vsc73xx_gpio_get;
+	vsc->gc.set = vsc73xx_gpio_set;
+	vsc->gc.direction_input = vsc73xx_gpio_direction_input;
+	vsc->gc.direction_output = vsc73xx_gpio_direction_output;
+	vsc->gc.get_direction = vsc73xx_gpio_get_direction;
+	vsc->gc.can_sleep = true;
+	ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc);
+	if (ret) {
+		dev_err(vsc->dev, "unable to register GPIO chip\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int vsc73xx_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct vsc73xx *vsc;
+	int ret;
+
+	vsc = devm_kzalloc(dev, sizeof(*vsc), GFP_KERNEL);
+	if (!vsc)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, vsc);
+	vsc->spi = spi_dev_get(spi);
+	vsc->dev = dev;
+	mutex_init(&vsc->lock);
+
+	/* Release reset, if any */
+	vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(vsc->reset)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return PTR_ERR(vsc->reset);
+	}
+	if (vsc->reset)
+		/* Wait 20ms according to datasheet table 245 */
+		msleep(20);
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(dev, "spi setup failed.\n");
+		return ret;
+	}
+
+	ret = vsc73xx_detect(vsc);
+	if (ret) {
+		dev_err(dev, "no chip found (%d)\n", ret);
+		return -ENODEV;
+	}
+
+	eth_random_addr(vsc->addr);
+	dev_info(vsc->dev,
+		 "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n",
+		 vsc->addr[0], vsc->addr[1], vsc->addr[2],
+		 vsc->addr[3], vsc->addr[4], vsc->addr[5]);
+
+	/* The VSC7395 switch chips have 5+1 ports which means 5
+	 * ordinary ports and a sixth CPU port facing the processor
+	 * with an RGMII interface. These ports are numbered 0..4
+	 * and 6, so they leave a "hole" in the port map for port 5,
+	 * which is invalid.
+	 *
+	 * The VSC7398 has 8 ports, port 7 is again the CPU port.
+	 *
+	 * We allocate 8 ports and avoid access to the nonexistant
+	 * ports.
+	 */
+	vsc->ds = dsa_switch_alloc(dev, 8);
+	if (!vsc->ds)
+		return -ENOMEM;
+	vsc->ds->priv = vsc;
+
+	vsc->ds->ops = &vsc73xx_ds_ops;
+	ret = dsa_register_switch(vsc->ds);
+	if (ret) {
+		dev_err(dev, "unable to register switch (%d)\n", ret);
+		return ret;
+	}
+
+	ret = vsc73xx_gpio_probe(vsc);
+	if (ret) {
+		dsa_unregister_switch(vsc->ds);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int vsc73xx_remove(struct spi_device *spi)
+{
+	struct vsc73xx *vsc = spi_get_drvdata(spi);
+
+	dsa_unregister_switch(vsc->ds);
+	gpiod_set_value(vsc->reset, 1);
+
+	return 0;
+}
+
+static const struct of_device_id vsc73xx_of_match[] = {
+	{
+		.compatible = "vitesse,vsc7385",
+	},
+	{
+		.compatible = "vitesse,vsc7388",
+	},
+	{
+		.compatible = "vitesse,vsc7395",
+	},
+	{
+		.compatible = "vitesse,vsc7398",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
+
+static struct spi_driver vsc73xx_driver = {
+	.probe = vsc73xx_probe,
+	.remove = vsc73xx_remove,
+	.driver = {
+		.name = "vsc73xx",
+		.of_match_table = vsc73xx_of_match,
+	},
+};
+module_spi_driver(vsc73xx_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver");
+MODULE_LICENSE("GPL v2");