diff options
| author | Marek Vasut <marex@denx.de> | 2021-01-20 01:10:45 +0100 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2021-01-20 20:50:49 -0800 |
| commit | c369d7fc8fddc5e5af4aea73dd403681a74c1a86 (patch) | |
| tree | 96a9891f21eae766a943703aa207179dd73c3c75 /drivers/net/dsa/microchip/ksz8795.c | |
| parent | 75439bc439e0f02903b48efce84876ca92da97bd (diff) | |
| download | linux-c369d7fc8fddc5e5af4aea73dd403681a74c1a86.tar.bz2 | |
net: dsa: microchip: ksz8795: Fix KSZ8794 port map again
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so
does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different
ID and port 3 not routed out, however the port 3 registers are present in
the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU
port {4}. Currently the driver always uses the last port as CPU port, on
KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port
3 and that is not OK, as it must also be port 4.
This patch adjusts the driver such that it always registers a switch with
5 ports total (4 external ports, 1 CPU port), always sets the CPU port to
switch port 4, and then configures the external port mask according to
the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765.
Fixes: 68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment")
Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible")
Fixes: 241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8795.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8795.c | 30 |
1 files changed, 20 insertions, 10 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index c973db101b72..a4570ba29c83 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -1187,6 +1187,20 @@ static const struct ksz_chip_data ksz8795_switch_chips[] = { .port_cnt = 5, /* total cpu and user ports */ }, { + /* + * WARNING + * ======= + * KSZ8794 is similar to KSZ8795, except the port map + * contains a gap between external and CPU ports, the + * port map is NOT continuous. The per-port register + * map is shifted accordingly too, i.e. registers at + * offset 0x40 are NOT used on KSZ8794 and they ARE + * used on KSZ8795 for external port 3. + * external cpu + * KSZ8794 0,1,2 4 + * KSZ8795 0,1,2,3 4 + * KSZ8765 0,1,2,3 4 + */ .chip_id = 0x8794, .dev_name = "KSZ8794", .num_vlans = 4096, @@ -1220,9 +1234,13 @@ static int ksz8795_switch_init(struct ksz_device *dev) dev->num_vlans = chip->num_vlans; dev->num_alus = chip->num_alus; dev->num_statics = chip->num_statics; - dev->port_cnt = chip->port_cnt; + dev->port_cnt = fls(chip->cpu_ports); + dev->cpu_port = fls(chip->cpu_ports) - 1; + dev->phy_port_cnt = dev->port_cnt - 1; dev->cpu_ports = chip->cpu_ports; - + dev->host_mask = chip->cpu_ports; + dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | + chip->cpu_ports; break; } } @@ -1231,17 +1249,9 @@ static int ksz8795_switch_init(struct ksz_device *dev) if (!dev->cpu_ports) return -ENODEV; - dev->port_mask = BIT(dev->port_cnt) - 1; - dev->port_mask |= dev->host_mask; - dev->reg_mib_cnt = KSZ8795_COUNTER_NUM; dev->mib_cnt = ARRAY_SIZE(mib_names); - dev->phy_port_cnt = dev->port_cnt - 1; - - dev->cpu_port = dev->port_cnt - 1; - dev->host_mask = BIT(dev->cpu_port); - dev->ports = devm_kzalloc(dev->dev, dev->port_cnt * sizeof(struct ksz_port), GFP_KERNEL); |