Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...

5 files changed, 110 insertions, 61 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3867f3d4545f..77501f9c5915 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1309,46 +1309,50 @@ void b53_port_event(struct dsa_switch *ds, int port)
 }
 EXPORT_SYMBOL(b53_port_event);
 
-void b53_phylink_validate(struct dsa_switch *ds, int port,
-			  unsigned long *supported,
-			  struct phylink_link_state *state)
+static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
+				 struct phylink_config *config)
 {
 	struct b53_device *dev = ds->priv;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
-	if (dev->ops->serdes_phylink_validate)
-		dev->ops->serdes_phylink_validate(dev, port, mask, state);
+	/* Internal ports need GMII for PHYLIB */
+	__set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
+
+	/* These switches appear to support MII and RevMII too, but beyond
+	 * this, the code gives very few clues. FIXME: We probably need more
+	 * interface modes here.
+	 *
+	 * According to b53_srab_mux_init(), ports 3..5 can support:
+	 *  SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
+	 * However, the interface mode read from the MUX configuration is
+	 * not passed back to DSA, so phylink uses NA.
+	 * DT can specify RGMII for ports 0, 1.
+	 * For MDIO, port 8 can be RGMII_TXID.
+	 */
+	__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
 
-	/* Allow all the expected bits */
-	phylink_set(mask, Autoneg);
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+		MAC_10 | MAC_100;
 
-	/* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we
-	 * support Gigabit, including Half duplex.
+	/* 5325/5365 are not capable of gigabit speeds, everything else is.
+	 * Note: the original code also exclulded Gigagbit for MII, RevMII
+	 * and 802.3z modes. MII and RevMII are not able to work above 100M,
+	 * so will be excluded by the generic validator implementation.
+	 * However, the exclusion of Gigabit for 802.3z just seems wrong.
 	 */
-	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII &&
-	    !phy_interface_mode_is_8023z(state->interface) &&
-	    !(is5325(dev) || is5365(dev))) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseT_Half);
-	}
+	if (!(is5325(dev) || is5365(dev)))
+		config->mac_capabilities |= MAC_1000;
 
-	if (!phy_interface_mode_is_8023z(state->interface)) {
-		phylink_set(mask, 10baseT_Half);
-		phylink_set(mask, 10baseT_Full);
-		phylink_set(mask, 100baseT_Half);
-		phylink_set(mask, 100baseT_Full);
-	}
+	/* Get the implementation specific capabilities */
+	if (dev->ops->phylink_get_caps)
+		dev->ops->phylink_get_caps(dev, port, config);
 
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
-
-	phylink_helper_basex_speed(state);
+	/* This driver does not make use of the speed, duplex, pause or the
+	 * advertisement in its mac_config, so it is safe to mark this driver
+	 * as non-legacy.
+	 */
+	config->legacy_pre_march2020 = false;
 }
-EXPORT_SYMBOL(b53_phylink_validate);
 
 int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
 			       struct phylink_link_state *state)
@@ -1704,7 +1708,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 }
 
 int b53_fdb_add(struct dsa_switch *ds, int port,
-		const unsigned char *addr, u16 vid)
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db)
 {
 	struct b53_device *priv = ds->priv;
 	int ret;
@@ -1724,7 +1729,8 @@ int b53_fdb_add(struct dsa_switch *ds, int port,
 EXPORT_SYMBOL(b53_fdb_add);
 
 int b53_fdb_del(struct dsa_switch *ds, int port,
-		const unsigned char *addr, u16 vid)
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db)
 {
 	struct b53_device *priv = ds->priv;
 	int ret;
@@ -1825,7 +1831,8 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
 EXPORT_SYMBOL(b53_fdb_dump);
 
 int b53_mdb_add(struct dsa_switch *ds, int port,
-		const struct switchdev_obj_port_mdb *mdb)
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db)
 {
 	struct b53_device *priv = ds->priv;
 	int ret;
@@ -1845,7 +1852,8 @@ int b53_mdb_add(struct dsa_switch *ds, int port,
 EXPORT_SYMBOL(b53_mdb_add);
 
 int b53_mdb_del(struct dsa_switch *ds, int port,
-		const struct switchdev_obj_port_mdb *mdb)
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db)
 {
 	struct b53_device *priv = ds->priv;
 	int ret;
@@ -1861,7 +1869,7 @@ int b53_mdb_del(struct dsa_switch *ds, int port,
 EXPORT_SYMBOL(b53_mdb_del);
 
 int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
-		bool *tx_fwd_offload)
+		bool *tx_fwd_offload, struct netlink_ext_ack *extack)
 {
 	struct b53_device *dev = ds->priv;
 	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
@@ -2102,7 +2110,8 @@ out:
 EXPORT_SYMBOL(b53_get_tag_protocol);
 
 int b53_mirror_add(struct dsa_switch *ds, int port,
-		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
+		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
+		   struct netlink_ext_ack *extack)
 {
 	struct b53_device *dev = ds->priv;
 	u16 reg, loc;
@@ -2186,7 +2195,7 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	int ret;
 
-	ret = phy_init_eee(phy, 0);
+	ret = phy_init_eee(phy, false);
 	if (ret)
 		return 0;
 
@@ -2259,7 +2268,7 @@ static const struct dsa_switch_ops b53_switch_ops = {
 	.phy_read		= b53_phy_read16,
 	.phy_write		= b53_phy_write16,
 	.adjust_link		= b53_adjust_link,
-	.phylink_validate	= b53_phylink_validate,
+	.phylink_get_caps	= b53_phylink_get_caps,
 	.phylink_mac_link_state	= b53_phylink_mac_link_state,
 	.phylink_mac_config	= b53_phylink_mac_config,
 	.phylink_mac_an_restart	= b53_phylink_mac_an_restart,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index b41dc8ac2ca8..3085b6cc7d40 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -46,6 +46,8 @@ struct b53_io_ops {
 	int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
 	int (*irq_enable)(struct b53_device *dev, int port);
 	void (*irq_disable)(struct b53_device *dev, int port);
+	void (*phylink_get_caps)(struct b53_device *dev, int port,
+				 struct phylink_config *config);
 	u8 (*serdes_map_lane)(struct b53_device *dev, int port);
 	int (*serdes_link_state)(struct b53_device *dev, int port,
 				 struct phylink_link_state *state);
@@ -56,9 +58,6 @@ struct b53_io_ops {
 	void (*serdes_link_set)(struct b53_device *dev, int port,
 				unsigned int mode, phy_interface_t interface,
 				bool link_up);
-	void (*serdes_phylink_validate)(struct b53_device *dev, int port,
-					unsigned long *supported,
-					struct phylink_link_state *state);
 };
 
 #define B53_INVALID_LANE	0xff
@@ -325,7 +324,7 @@ void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset);
 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data);
 int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
-		bool *tx_fwd_offload);
+		bool *tx_fwd_offload, struct netlink_ext_ack *extack);
 void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge);
 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
 void b53_br_fast_age(struct dsa_switch *ds, int port);
@@ -337,9 +336,6 @@ int b53_br_flags(struct dsa_switch *ds, int port,
 		 struct netlink_ext_ack *extack);
 int b53_setup_devlink_resources(struct dsa_switch *ds);
 void b53_port_event(struct dsa_switch *ds, int port);
-void b53_phylink_validate(struct dsa_switch *ds, int port,
-			  unsigned long *supported,
-			  struct phylink_link_state *state);
 int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
 			       struct phylink_link_state *state);
 void b53_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -363,17 +359,22 @@ int b53_vlan_add(struct dsa_switch *ds, int port,
 int b53_vlan_del(struct dsa_switch *ds, int port,
 		 const struct switchdev_obj_port_vlan *vlan);
 int b53_fdb_add(struct dsa_switch *ds, int port,
-		const unsigned char *addr, u16 vid);
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db);
 int b53_fdb_del(struct dsa_switch *ds, int port,
-		const unsigned char *addr, u16 vid);
+		const unsigned char *addr, u16 vid,
+		struct dsa_db db);
 int b53_fdb_dump(struct dsa_switch *ds, int port,
 		 dsa_fdb_dump_cb_t *cb, void *data);
 int b53_mdb_add(struct dsa_switch *ds, int port,
-		const struct switchdev_obj_port_mdb *mdb);
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db);
 int b53_mdb_del(struct dsa_switch *ds, int port,
-		const struct switchdev_obj_port_mdb *mdb);
+		const struct switchdev_obj_port_mdb *mdb,
+		struct dsa_db db);
 int b53_mirror_add(struct dsa_switch *ds, int port,
-		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
+		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
+		   struct netlink_ext_ack *extack);
 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
 					   enum dsa_tag_protocol mprot);
 void b53_mirror_del(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
index 5ae3d9783b68..555e5b372321 100644
--- a/drivers/net/dsa/b53/b53_serdes.c
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -158,9 +158,8 @@ void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
 }
 EXPORT_SYMBOL(b53_serdes_link_set);
 
-void b53_serdes_phylink_validate(struct b53_device *dev, int port,
-				 unsigned long *supported,
-				 struct phylink_link_state *state)
+void b53_serdes_phylink_get_caps(struct b53_device *dev, int port,
+				 struct phylink_config *config)
 {
 	u8 lane = b53_serdes_map_lane(dev, port);
 
@@ -169,16 +168,24 @@ void b53_serdes_phylink_validate(struct b53_device *dev, int port,
 
 	switch (lane) {
 	case 0:
-		phylink_set(supported, 2500baseX_Full);
+		/* It appears lane 0 supports 2500base-X and 1000base-X */
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  config->supported_interfaces);
+		config->mac_capabilities |= MAC_2500FD;
 		fallthrough;
 	case 1:
-		phylink_set(supported, 1000baseX_Full);
+		/* It appears lane 1 only supports 1000base-X and SGMII */
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  config->supported_interfaces);
+		config->mac_capabilities |= MAC_1000FD;
 		break;
 	default:
 		break;
 	}
 }
-EXPORT_SYMBOL(b53_serdes_phylink_validate);
+EXPORT_SYMBOL(b53_serdes_phylink_get_caps);
 
 int b53_serdes_init(struct b53_device *dev, int port)
 {
diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h
index 55d280fe38e4..f47d5caa7557 100644
--- a/drivers/net/dsa/b53/b53_serdes.h
+++ b/drivers/net/dsa/b53/b53_serdes.h
@@ -115,9 +115,8 @@ void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode,
 void b53_serdes_an_restart(struct b53_device *dev, int port);
 void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
 			 phy_interface_t interface, bool link_up);
-void b53_serdes_phylink_validate(struct b53_device *dev, int port,
-				unsigned long *supported,
-				struct phylink_link_state *state);
+void b53_serdes_phylink_get_caps(struct b53_device *dev, int port,
+				 struct phylink_config *config);
 #if IS_ENABLED(CONFIG_B53_SERDES)
 int b53_serdes_init(struct b53_device *dev, int port);
 #else
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 4591bb1c05d2..c51b716657db 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -443,6 +443,39 @@ static void b53_srab_irq_disable(struct b53_device *dev, int port)
 	}
 }
 
+static void b53_srab_phylink_get_caps(struct b53_device *dev, int port,
+				      struct phylink_config *config)
+{
+	struct b53_srab_priv *priv = dev->priv;
+	struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+	switch (p->mode) {
+	case PHY_INTERFACE_MODE_SGMII:
+#if IS_ENABLED(CONFIG_B53_SERDES)
+		/* If p->mode indicates SGMII mode, that essentially means we
+		 * are using a serdes. As the serdes for the capabilities.
+		 */
+		b53_serdes_phylink_get_caps(dev, port, config);
+#endif
+		break;
+
+	case PHY_INTERFACE_MODE_NA:
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+		/* If we support RGMII, support all RGMII modes, since
+		 * that dictates the PHY delay settings.
+		 */
+		phy_interface_set_rgmii(config->supported_interfaces);
+		break;
+
+	default:
+		/* Some other mode (e.g. MII, GMII etc) */
+		__set_bit(p->mode, config->supported_interfaces);
+		break;
+	}
+}
+
 static const struct b53_io_ops b53_srab_ops = {
 	.read8 = b53_srab_read8,
 	.read16 = b53_srab_read16,
@@ -456,13 +489,13 @@ static const struct b53_io_ops b53_srab_ops = {
 	.write64 = b53_srab_write64,
 	.irq_enable = b53_srab_irq_enable,
 	.irq_disable = b53_srab_irq_disable,
+	.phylink_get_caps = b53_srab_phylink_get_caps,
 #if IS_ENABLED(CONFIG_B53_SERDES)
 	.serdes_map_lane = b53_srab_serdes_map_lane,
 	.serdes_link_state = b53_serdes_link_state,
 	.serdes_config = b53_serdes_config,
 	.serdes_an_restart = b53_serdes_an_restart,
 	.serdes_link_set = b53_serdes_link_set,
-	.serdes_phylink_validate = b53_serdes_phylink_validate,
 #endif
 };