diff options
| author | Florian Fainelli <f.fainelli@gmail.com> | 2017-03-30 18:43:21 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-04-01 12:39:32 -0700 |
| commit | 98cd1552ea27e512c7e99e2aa76042a26e4fb25c (patch) | |
| tree | aba74b9bf561693e0fae899c347b33cd8698eec5 /drivers/net/dsa/Makefile | |
| parent | 772c3bdad10db607b1035ae74cc817e81a114021 (diff) | |
| download | linux-98cd1552ea27e512c7e99e2aa76042a26e4fb25c.tar.bz2 | |
net: dsa: Mock-up driver
This patch adds support for a DSA mock-up driver which essentially does
the following:
- registers/unregisters 4 fixed PHYs to the slave network devices
- uses eth0 (configurable) as the master netdev
- registers the switch as a fixed MDIO device against the fixed MDIO bus
at address 31
- includes dynamic debug prints for dsa_switch_ops functions that can be
enabled to get call traces
This is a good way to test modular builds as well as exercise the DSA
APIs without requiring access to real hardware. This does not test the
data-path, although this could be added later on.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa/Makefile')
| -rw-r--r-- | drivers/net/dsa/Makefile | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index a3c941632217..5c8830991041 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -2,6 +2,6 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o - obj-y += b53/ obj-y += mv88e6xxx/ +obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o dsa_loop_bdinfo.o |