summaryrefslogtreecommitdiffstats
path: root/drivers/net/de620.c
diff options
context:
space:
mode:
authorAlexander Beregalov <a.beregalov@gmail.com>2009-05-15 10:22:40 +0000
committerDavid S. Miller <davem@davemloft.net>2009-05-17 21:03:46 -0700
commit2818fba1322c469181603a1fbffadf3d3c5cb1e0 (patch)
treee088a16da41c3ed87dabb9644756220e7803136d /drivers/net/de620.c
parent64303258961c74f0168e056da14b612ce839dbc1 (diff)
downloadlinux-2818fba1322c469181603a1fbffadf3d3c5cb1e0.tar.bz2
de620: convert PRINTK() to pr_debug() and cleanup
Also remove DE620_DEBUG and de620_debug. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/de620.c')
-rw-r--r--drivers/net/de620.c59
1 files changed, 18 insertions, 41 deletions
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index c5cd6e3d00df..039bc1acadd3 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -48,7 +48,6 @@ static const char version[] =
* Compile-time options: (see below for descriptions)
* -DDE620_IO=0x378 (lpt1)
* -DDE620_IRQ=7 (lpt1)
- * -DDE602_DEBUG=...
* -DSHUTDOWN_WHEN_LOST
* -DCOUNT_LOOPS
* -DLOWSPEED
@@ -98,15 +97,6 @@ static const char version[] =
#define SHUTDOWN_WHEN_LOST
*/
-/*
- * Enable debugging by "-DDE620_DEBUG=3" when compiling,
- * OR by enabling the following #define
- *
- * use 0 for production, 1 for verification, >2 for debug
- *
-#define DE620_DEBUG 3
- */
-
#ifdef LOWSPEED
/*
* Enable this #define if you want to see debugging output that show how long
@@ -160,14 +150,6 @@ typedef unsigned char byte;
#define RUNT 60 /* Too small Ethernet packet */
#define GIANT 1514 /* largest legal size packet, no fcs */
-#ifdef DE620_DEBUG /* Compile-time configurable */
-#define PRINTK(x) if (de620_debug >= 2) printk x
-#else
-#define DE620_DEBUG 0
-#define PRINTK(x) /**/
-#endif
-
-
/*
* Force media with insmod:
* insmod de620.o bnc=1
@@ -186,8 +168,6 @@ static int io = DE620_IO;
static int irq = DE620_IRQ;
static int clone = DE620_CLONE;
-static unsigned int de620_debug = DE620_DEBUG;
-
static spinlock_t de620_lock;
module_param(bnc, int, 0);
@@ -195,13 +175,11 @@ module_param(utp, int, 0);
module_param(io, int, 0);
module_param(irq, int, 0);
module_param(clone, int, 0);
-module_param(de620_debug, int, 0);
MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)");
MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)");
MODULE_PARM_DESC(io, "DE-620 I/O base address,required");
MODULE_PARM_DESC(irq, "DE-620 IRQ number,required");
MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)");
-MODULE_PARM_DESC(de620_debug, "DE-620 debug level (0-2)");
/***********************************************
* *
@@ -534,8 +512,8 @@ static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* Start real output */
spin_lock_irqsave(&de620_lock, flags);
- PRINTK(("de620_start_xmit: len=%d, bufs 0x%02x\n",
- (int)skb->len, using_txbuf));
+ pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n",
+ (int)skb->len, using_txbuf);
/* select a free tx buffer. if there is one... */
switch (using_txbuf) {
@@ -585,12 +563,12 @@ de620_interrupt(int irq_in, void *dev_id)
/* Read the status register (_not_ the status port) */
irq_status = de620_get_register(dev, R_STS);
- PRINTK(("de620_interrupt (%2.2X)\n", irq_status));
+ pr_debug("de620_interrupt (%2.2X)\n", irq_status);
if (irq_status & RXGOOD) {
do {
again = de620_rx_intr(dev);
- PRINTK(("again=%d\n", again));
+ pr_debug("again=%d\n", again);
}
while (again && (++bogus_count < 100));
}
@@ -622,7 +600,7 @@ static int de620_rx_intr(struct net_device *dev)
byte pagelink;
byte curr_page;
- PRINTK(("de620_rx_intr: next_rx_page = %d\n", next_rx_page));
+ pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page);
/* Tell the adapter that we are going to read data, and from where */
de620_send_command(dev, W_CR | RRN);
@@ -631,8 +609,9 @@ static int de620_rx_intr(struct net_device *dev)
/* Deep breath, and away we goooooo */
de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf));
- PRINTK(("page status=0x%02x, nextpage=%d, packetsize=%d\n",
- header_buf.status, header_buf.Rx_NextPage, header_buf.Rx_ByteCount));
+ pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n",
+ header_buf.status, header_buf.Rx_NextPage,
+ header_buf.Rx_ByteCount);
/* Plausible page header? */
pagelink = header_buf.Rx_NextPage;
@@ -683,7 +662,7 @@ static int de620_rx_intr(struct net_device *dev)
buffer = skb_put(skb,size);
/* copy the packet into the buffer */
de620_read_block(dev, buffer, size);
- PRINTK(("Read %d bytes\n", size));
+ pr_debug("Read %d bytes\n", size);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb); /* deliver it "upstairs" */
/* count all receives */
@@ -696,7 +675,7 @@ static int de620_rx_intr(struct net_device *dev)
/* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */
curr_page = de620_get_register(dev, R_CPR);
de620_set_register(dev, W_NPRF, next_rx_page);
- PRINTK(("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page));
+ pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page);
return (next_rx_page != curr_page); /* That was slightly tricky... */
}
@@ -830,8 +809,7 @@ struct net_device * __init de620_probe(int unit)
netdev_boot_setup_check(dev);
}
- if (de620_debug)
- printk(version);
+ pr_debug("%s", version);
printk(KERN_INFO "D-Link DE-620 pocket adapter");
@@ -878,14 +856,13 @@ struct net_device * __init de620_probe(int unit)
/* base_addr and irq are already set, see above! */
/* dump eeprom */
- if (de620_debug) {
- printk("\nEEPROM contents:\n");
- printk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);
- printk("NodeID = %pM\n", nic_data.NodeID);
- printk("Model = %d\n", nic_data.Model);
- printk("Media = %d\n", nic_data.Media);
- printk("SCR = 0x%02x\n", nic_data.SCR);
- }
+ pr_debug("\nEEPROM contents:\n"
+ "RAM_Size = 0x%02X\n"
+ "NodeID = %pM\n"
+ "Model = %d\n"
+ "Media = %d\n"
+ "SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID,
+ nic_data.Model, nic_data.Media, nic_data.SCR);
err = register_netdev(dev);
if (err)