de6*/dl2k/sundance: Move the D-Link drivers

Move the D-Link drivers into drivers/net/ethernet/dlink/ and
make the necessary Kconfig and Makefile changes.

CC: Bjorn Ekwall <bj0rn@blox.se>
CC: Donald Becker <becker@scyld.com>
CC: Edward Peng <edward_peng@dlink.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 530 deletions

diff --git a/drivers/net/de600.c b/drivers/net/de600.c
deleted file mode 100644
index 23a65398d011..000000000000
--- a/drivers/net/de600.c
+++ /dev/null
@@ -1,530 +0,0 @@
-static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj0rn@blox.se)\n";
-/*
- *	de600.c
- *
- *	Linux driver for the D-Link DE-600 Ethernet pocket adapter.
- *
- *	Portions (C) Copyright 1993, 1994 by Bjorn Ekwall
- *	The Author may be reached as bj0rn@blox.se
- *
- *	Based on adapter information gathered from DE600.ASM by D-Link Inc.,
- *	as included on disk C in the v.2.11 of PC/TCP from FTP Software.
- *	For DE600.asm:
- *		Portions (C) Copyright 1990 D-Link, Inc.
- *		Copyright, 1988-1992, Russell Nelson, Crynwr Software
- *
- *	Adapted to the sample network driver core for linux,
- *	written by: Donald Becker <becker@super.org>
- *		(Now at <becker@scyld.com>)
- *
- **************************************************************/
-/*
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2, or (at your option)
- *	any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- **************************************************************/
-
-/* Add more time here if your adapter won't work OK: */
-#define DE600_SLOW_DOWN	udelay(delay_time)
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <asm/system.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/io.h>
-
-#include "de600.h"
-
-static unsigned int check_lost = 1;
-module_param(check_lost, bool, 0);
-MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
-
-static unsigned int delay_time = 10;
-module_param(delay_time, int, 0);
-MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds");
-
-
-/*
- * D-Link driver variables:
- */
-
-static volatile int		rx_page;
-
-#define TX_PAGES 2
-static volatile int		tx_fifo[TX_PAGES];
-static volatile int		tx_fifo_in;
-static volatile int		tx_fifo_out;
-static volatile int		free_tx_pages = TX_PAGES;
-static int			was_down;
-static DEFINE_SPINLOCK(de600_lock);
-
-static inline u8 de600_read_status(struct net_device *dev)
-{
-	u8 status;
-
-	outb_p(STATUS, DATA_PORT);
-	status = inb(STATUS_PORT);
-	outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT);
-
-	return status;
-}
-
-static inline u8 de600_read_byte(unsigned char type, struct net_device *dev)
-{
-	/* dev used by macros */
-	u8 lo;
-	outb_p((type), DATA_PORT);
-	lo = ((unsigned char)inb(STATUS_PORT)) >> 4;
-	outb_p((type) | HI_NIBBLE, DATA_PORT);
-	return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo;
-}
-
-/*
- * Open/initialize the board.  This is called (in the current kernel)
- * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1).
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is a non-reboot way to recover if something goes wrong.
- */
-
-static int de600_open(struct net_device *dev)
-{
-	unsigned long flags;
-	int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev);
-	if (ret) {
-		printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);
-		return ret;
-	}
-	spin_lock_irqsave(&de600_lock, flags);
-	ret = adapter_init(dev);
-	spin_unlock_irqrestore(&de600_lock, flags);
-	return ret;
-}
-
-/*
- * The inverse routine to de600_open().
- */
-
-static int de600_close(struct net_device *dev)
-{
-	select_nic();
-	rx_page = 0;
-	de600_put_command(RESET);
-	de600_put_command(STOP_RESET);
-	de600_put_command(0);
-	select_prn();
-	free_irq(DE600_IRQ, dev);
-	return 0;
-}
-
-static inline void trigger_interrupt(struct net_device *dev)
-{
-	de600_put_command(FLIP_IRQ);
-	select_prn();
-	DE600_SLOW_DOWN;
-	select_nic();
-	de600_put_command(0);
-}
-
-/*
- * Copy a buffer to the adapter transmit page memory.
- * Start sending.
- */
-
-static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned long flags;
-	int	transmit_from;
-	int	len;
-	int	tickssofar;
-	u8	*buffer = skb->data;
-	int	i;
-
-	if (free_tx_pages <= 0) {	/* Do timeouts, to avoid hangs. */
-		tickssofar = jiffies - dev_trans_start(dev);
-		if (tickssofar < HZ/20)
-			return NETDEV_TX_BUSY;
-		/* else */
-		printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
-		/* Restart the adapter. */
-		spin_lock_irqsave(&de600_lock, flags);
-		if (adapter_init(dev)) {
-			spin_unlock_irqrestore(&de600_lock, flags);
-			return NETDEV_TX_BUSY;
-		}
-		spin_unlock_irqrestore(&de600_lock, flags);
-	}
-
-	/* Start real output */
-	pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages);
-
-	if ((len = skb->len) < RUNT)
-		len = RUNT;
-
-	spin_lock_irqsave(&de600_lock, flags);
-	select_nic();
-	tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
-	tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
-
-	if(check_lost)
-	{
-		/* This costs about 40 instructions per packet... */
-		de600_setup_address(NODE_ADDRESS, RW_ADDR);
-		de600_read_byte(READ_DATA, dev);
-		if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
-			if (adapter_init(dev)) {
-				spin_unlock_irqrestore(&de600_lock, flags);
-				return NETDEV_TX_BUSY;
-			}
-		}
-	}
-
-	de600_setup_address(transmit_from, RW_ADDR);
-	for (i = 0;  i < skb->len ; ++i, ++buffer)
-		de600_put_byte(*buffer);
-	for (; i < len; ++i)
-		de600_put_byte(0);
-
-	if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
-		dev->trans_start = jiffies;
-		netif_start_queue(dev); /* allow more packets into adapter */
-		/* Send page and generate a faked interrupt */
-		de600_setup_address(transmit_from, TX_ADDR);
-		de600_put_command(TX_ENABLE);
-	}
-	else {
-		if (free_tx_pages)
-			netif_start_queue(dev);
-		else
-			netif_stop_queue(dev);
-		select_prn();
-	}
-	spin_unlock_irqrestore(&de600_lock, flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-/*
- * The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-
-static irqreturn_t de600_interrupt(int irq, void *dev_id)
-{
-	struct net_device	*dev = dev_id;
-	u8		irq_status;
-	int		retrig = 0;
-	int		boguscount = 0;
-
-	spin_lock(&de600_lock);
-
-	select_nic();
-	irq_status = de600_read_status(dev);
-
-	do {
-		pr_debug("de600_interrupt (%02X)\n", irq_status);
-
-		if (irq_status & RX_GOOD)
-			de600_rx_intr(dev);
-		else if (!(irq_status & RX_BUSY))
-			de600_put_command(RX_ENABLE);
-
-		/* Any transmission in progress? */
-		if (free_tx_pages < TX_PAGES)
-			retrig = de600_tx_intr(dev, irq_status);
-		else
-			retrig = 0;
-
-		irq_status = de600_read_status(dev);
-	} while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) );
-	/*
-	 * Yeah, it _looks_ like busy waiting, smells like busy waiting
-	 * and I know it's not PC, but please, it will only occur once
-	 * in a while and then only for a loop or so (< 1ms for sure!)
-	 */
-
-	/* Enable adapter interrupts */
-	select_prn();
-	if (retrig)
-		trigger_interrupt(dev);
-	spin_unlock(&de600_lock);
-	return IRQ_HANDLED;
-}
-
-static int de600_tx_intr(struct net_device *dev, int irq_status)
-{
-	/*
-	 * Returns 1 if tx still not done
-	 */
-
-	/* Check if current transmission is done yet */
-	if (irq_status & TX_BUSY)
-		return 1; /* tx not done, try again */
-
-	/* else */
-	/* If last transmission OK then bump fifo index */
-	if (!(irq_status & TX_FAILED16)) {
-		tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;
-		++free_tx_pages;
-		dev->stats.tx_packets++;
-		netif_wake_queue(dev);
-	}
-
-	/* More to send, or resend last packet? */
-	if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) {
-		dev->trans_start = jiffies;
-		de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR);
-		de600_put_command(TX_ENABLE);
-		return 1;
-	}
-	/* else */
-
-	return 0;
-}
-
-/*
- * We have a good packet, get it out of the adapter.
- */
-static void de600_rx_intr(struct net_device *dev)
-{
-	struct sk_buff	*skb;
-	int		i;
-	int		read_from;
-	int		size;
-	unsigned char	*buffer;
-
-	/* Get size of received packet */
-	size = de600_read_byte(RX_LEN, dev);	/* low byte */
-	size += (de600_read_byte(RX_LEN, dev) << 8);	/* high byte */
-	size -= 4;	/* Ignore trailing 4 CRC-bytes */
-
-	/* Tell adapter where to store next incoming packet, enable receiver */
-	read_from = rx_page_adr();
-	next_rx_page();
-	de600_put_command(RX_ENABLE);
-
-	if ((size < 32)  ||  (size > 1535)) {
-		printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size);
-		if (size > 10000)
-			adapter_init(dev);
-		return;
-	}
-
-	skb = dev_alloc_skb(size+2);
-	if (skb == NULL) {
-		printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
-		return;
-	}
-	/* else */
-
-	skb_reserve(skb,2);	/* Align */
-
-	/* 'skb->data' points to the start of sk_buff data area. */
-	buffer = skb_put(skb,size);
-
-	/* copy the packet into the buffer */
-	de600_setup_address(read_from, RW_ADDR);
-	for (i = size; i > 0; --i, ++buffer)
-		*buffer = de600_read_byte(READ_DATA, dev);
-
-	skb->protocol=eth_type_trans(skb,dev);
-
-	netif_rx(skb);
-
-	/* update stats */
-	dev->stats.rx_packets++; /* count all receives */
-	dev->stats.rx_bytes += size; /* count all received bytes */
-
-	/*
-	 * If any worth-while packets have been received, netif_rx()
-	 * will work on them when we get to the tasklets.
-	 */
-}
-
-static const struct net_device_ops de600_netdev_ops = {
-	.ndo_open		= de600_open,
-	.ndo_stop		= de600_close,
-	.ndo_start_xmit		= de600_start_xmit,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-
-static struct net_device * __init de600_probe(void)
-{
-	int	i;
-	struct net_device *dev;
-	int err;
-
-	dev = alloc_etherdev(0);
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-
-	if (!request_region(DE600_IO, 3, "de600")) {
-		printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
-		err = -EBUSY;
-		goto out;
-	}
-
-	printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
-	/* Alpha testers must have the version number to report bugs. */
-	pr_debug("%s", version);
-
-	/* probe for adapter */
-	err = -ENODEV;
-	rx_page = 0;
-	select_nic();
-	(void)de600_read_status(dev);
-	de600_put_command(RESET);
-	de600_put_command(STOP_RESET);
-	if (de600_read_status(dev) & 0xf0) {
-		printk(": not at I/O %#3x.\n", DATA_PORT);
-		goto out1;
-	}
-
-	/*
-	 * Maybe we found one,
-	 * have to check if it is a D-Link DE-600 adapter...
-	 */
-
-	/* Get the adapter ethernet address from the ROM */
-	de600_setup_address(NODE_ADDRESS, RW_ADDR);
-	for (i = 0; i < ETH_ALEN; i++) {
-		dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
-		dev->broadcast[i] = 0xff;
-	}
-
-	/* Check magic code */
-	if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
-		/* OK, install real address */
-		dev->dev_addr[0] = 0x00;
-		dev->dev_addr[1] = 0x80;
-		dev->dev_addr[2] = 0xc8;
-		dev->dev_addr[3] &= 0x0f;
-		dev->dev_addr[3] |= 0x70;
-	} else {
-		printk(" not identified in the printer port\n");
-		goto out1;
-	}
-
-	printk(", Ethernet Address: %pM\n", dev->dev_addr);
-
-	dev->netdev_ops = &de600_netdev_ops;
-
-	dev->flags&=~IFF_MULTICAST;
-
-	select_prn();
-
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-
-	return dev;
-
-out1:
-	release_region(DE600_IO, 3);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-static int adapter_init(struct net_device *dev)
-{
-	int	i;
-
-	select_nic();
-	rx_page = 0; /* used by RESET */
-	de600_put_command(RESET);
-	de600_put_command(STOP_RESET);
-
-	/* Check if it is still there... */
-	/* Get the some bytes of the adapter ethernet address from the ROM */
-	de600_setup_address(NODE_ADDRESS, RW_ADDR);
-	de600_read_byte(READ_DATA, dev);
-	if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
-	    (de600_read_byte(READ_DATA, dev) != 0x15)) {
-	/* was: if (de600_read_status(dev) & 0xf0) { */
-		printk("Something has happened to the DE-600!  Please check it and do a new ifconfig!\n");
-		/* Goodbye, cruel world... */
-		dev->flags &= ~IFF_UP;
-		de600_close(dev);
-		was_down = 1;
-		netif_stop_queue(dev); /* Transmit busy...  */
-		return 1; /* failed */
-	}
-
-	if (was_down) {
-		printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name);
-		was_down = 0;
-	}
-
-	tx_fifo_in = 0;
-	tx_fifo_out = 0;
-	free_tx_pages = TX_PAGES;
-
-
-	/* set the ether address. */
-	de600_setup_address(NODE_ADDRESS, RW_ADDR);
-	for (i = 0; i < ETH_ALEN; i++)
-		de600_put_byte(dev->dev_addr[i]);
-
-	/* where to start saving incoming packets */
-	rx_page = RX_BP | RX_BASE_PAGE;
-	de600_setup_address(MEM_4K, RW_ADDR);
-	/* Enable receiver */
-	de600_put_command(RX_ENABLE);
-	select_prn();
-
-	netif_start_queue(dev);
-
-	return 0; /* OK */
-}
-
-static struct net_device *de600_dev;
-
-static int __init de600_init(void)
-{
-	de600_dev = de600_probe();
-	if (IS_ERR(de600_dev))
-		return PTR_ERR(de600_dev);
-	return 0;
-}
-
-static void __exit de600_exit(void)
-{
-	unregister_netdev(de600_dev);
-	release_region(DE600_IO, 3);
-	free_netdev(de600_dev);
-}
-
-module_init(de600_init);
-module_exit(de600_exit);
-
-MODULE_LICENSE("GPL");