Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	arch/arm/boot/dts/imx6sx-sdb.dts
	net/sched/cls_bpf.c

Two simple sets of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 61 insertions, 41 deletions

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 70f77e96d409..041525d2595c 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -615,6 +615,9 @@ static void c_can_stop(struct net_device *dev)
 
 	c_can_irq_control(priv, false);
 
+	/* put ctrl to init on stop to end ongoing transmission */
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT);
+
 	/* deactivate pins */
 	pinctrl_pm_select_sleep_state(dev->dev.parent);
 	priv->can.state = CAN_STATE_STOPPED;
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index f363972cd77d..e36d10520e24 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -103,27 +103,34 @@ static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
 	mask = 1 << raminit->bits.start | 1 << raminit->bits.done;
 	regmap_read(raminit->syscon, raminit->reg, &ctrl);
 
-	/* We clear the done and start bit first. The start bit is
+	/* We clear the start bit first. The start bit is
 	 * looking at the 0 -> transition, but is not self clearing;
-	 * And we clear the init done bit as well.
 	 * NOTE: DONE must be written with 1 to clear it.
+	 * We can't clear the DONE bit here using regmap_update_bits()
+	 * as it will bypass the write if initial condition is START:0 DONE:1
+	 * e.g. on DRA7 which needs START pulse.
 	 */
-	ctrl &= ~(1 << raminit->bits.start);
-	ctrl |= 1 << raminit->bits.done;
-	regmap_write(raminit->syscon, raminit->reg, ctrl);
+	ctrl &= ~mask;	/* START = 0, DONE = 0 */
+	regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
 
-	ctrl &= ~(1 << raminit->bits.done);
-	c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
+	/* check if START bit is 0. Ignore DONE bit for now
+	 * as it can be either 0 or 1.
+	 */
+	c_can_hw_raminit_wait_syscon(priv, 1 << raminit->bits.start, ctrl);
 
 	if (enable) {
-		/* Set start bit and wait for the done bit. */
+		/* Clear DONE bit & set START bit. */
 		ctrl |= 1 << raminit->bits.start;
-		regmap_write(raminit->syscon, raminit->reg, ctrl);
-
+		/* DONE must be written with 1 to clear it */
+		ctrl |= 1 << raminit->bits.done;
+		regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+		/* prevent further clearing of DONE bit */
+		ctrl &= ~(1 << raminit->bits.done);
 		/* clear START bit if start pulse is needed */
 		if (raminit->needs_pulse) {
 			ctrl &= ~(1 << raminit->bits.start);
-			regmap_write(raminit->syscon, raminit->reg, ctrl);
+			regmap_update_bits(raminit->syscon, raminit->reg,
+					   mask, ctrl);
 		}
 
 		ctrl |= 1 << raminit->bits.done;
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 6ac02c8d747e..3c82e02e3dae 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -808,10 +808,14 @@ static int can_changelink(struct net_device *dev,
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
 		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
-		if (cm->flags & ~priv->ctrlmode_supported)
+
+		/* check whether changed bits are allowed to be modified */
+		if (cm->mask & ~priv->ctrlmode_supported)
 			return -EOPNOTSUPP;
+
+		/* clear bits to be modified and copy the flag values */
 		priv->ctrlmode &= ~cm->mask;
-		priv->ctrlmode |= cm->flags;
+		priv->ctrlmode |= (cm->flags & cm->mask);
 
 		/* CAN_CTRLMODE_FD can only be set when driver supports FD */
 		if (priv->ctrlmode & CAN_CTRLMODE_FD)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index b2ecb6c5e94b..2e04b3aeeb37 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -956,6 +956,11 @@ static struct net_device *alloc_m_can_dev(void)
 	priv->can.data_bittiming_const = &m_can_data_bittiming_const;
 	priv->can.do_set_mode = m_can_set_mode;
 	priv->can.do_get_berr_counter = m_can_get_berr_counter;
+
+	/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.1 */
+	priv->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+
+	/* CAN_CTRLMODE_FD_NON_ISO can not be changed with M_CAN IP v3.0.1 */
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
 					CAN_CTRLMODE_LISTENONLY |
 					CAN_CTRLMODE_BERR_REPORTING |
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 541fb7a05625..7af379ca861b 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -520,10 +520,10 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
 		skb = alloc_can_err_skb(priv->netdev, &cf);
 		if (skb) {
 			cf->can_id |= CAN_ERR_RESTARTED;
-			netif_rx(skb);
 
 			stats->rx_packets++;
 			stats->rx_bytes += cf->can_dlc;
+			netif_rx(skb);
 		} else {
 			netdev_err(priv->netdev,
 				   "No memory left for err_skb\n");
@@ -587,7 +587,7 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv,
 			  usb_sndbulkpipe(dev->udev,
 					  dev->bulk_out->bEndpointAddress),
 			  buf, msg->len,
-			  kvaser_usb_simple_msg_callback, priv);
+			  kvaser_usb_simple_msg_callback, netdev);
 	usb_anchor_urb(urb, &priv->tx_submitted);
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -662,11 +662,6 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
 	priv = dev->nets[channel];
 	stats = &priv->netdev->stats;
 
-	if (status & M16C_STATE_BUS_RESET) {
-		kvaser_usb_unlink_tx_urbs(priv);
-		return;
-	}
-
 	skb = alloc_can_err_skb(priv->netdev, &cf);
 	if (!skb) {
 		stats->rx_dropped++;
@@ -677,7 +672,7 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
 
 	netdev_dbg(priv->netdev, "Error status: 0x%02x\n", status);
 
-	if (status & M16C_STATE_BUS_OFF) {
+	if (status & (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) {
 		cf->can_id |= CAN_ERR_BUSOFF;
 
 		priv->can.can_stats.bus_off++;
@@ -703,9 +698,7 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
 		}
 
 		new_state = CAN_STATE_ERROR_PASSIVE;
-	}
-
-	if (status == M16C_STATE_BUS_ERROR) {
+	} else if (status & M16C_STATE_BUS_ERROR) {
 		if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
 		    ((txerr >= 96) || (rxerr >= 96))) {
 			cf->can_id |= CAN_ERR_CRTL;
@@ -715,7 +708,8 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
 
 			priv->can.can_stats.error_warning++;
 			new_state = CAN_STATE_ERROR_WARNING;
-		} else if (priv->can.state > CAN_STATE_ERROR_ACTIVE) {
+		} else if ((priv->can.state > CAN_STATE_ERROR_ACTIVE) &&
+			   ((txerr < 96) && (rxerr < 96))) {
 			cf->can_id |= CAN_ERR_PROT;
 			cf->data[2] = CAN_ERR_PROT_ACTIVE;
 
@@ -770,10 +764,9 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
 
 	priv->can.state = new_state;
 
-	netif_rx(skb);
-
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
+	netif_rx(skb);
 }
 
 static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
@@ -805,10 +798,9 @@ static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
 		stats->rx_over_errors++;
 		stats->rx_errors++;
 
-		netif_rx(skb);
-
 		stats->rx_packets++;
 		stats->rx_bytes += cf->can_dlc;
+		netif_rx(skb);
 	}
 }
 
@@ -887,10 +879,9 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
 			       cf->can_dlc);
 	}
 
-	netif_rx(skb);
-
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
+	netif_rx(skb);
 }
 
 static void kvaser_usb_start_chip_reply(const struct kvaser_usb *dev,
@@ -1246,6 +1237,9 @@ static int kvaser_usb_close(struct net_device *netdev)
 	if (err)
 		netdev_warn(netdev, "Cannot stop device, error %d\n", err);
 
+	/* reset tx contexts */
+	kvaser_usb_unlink_tx_urbs(priv);
+
 	priv->can.state = CAN_STATE_STOPPED;
 	close_candev(priv->netdev);
 
@@ -1294,12 +1288,14 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 	if (!urb) {
 		netdev_err(netdev, "No memory left for URBs\n");
 		stats->tx_dropped++;
-		goto nourbmem;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
 	}
 
 	buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC);
 	if (!buf) {
 		stats->tx_dropped++;
+		dev_kfree_skb(skb);
 		goto nobufmem;
 	}
 
@@ -1334,6 +1330,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 		}
 	}
 
+	/* This should never happen; it implies a flow control bug */
 	if (!context) {
 		netdev_warn(netdev, "cannot find free context\n");
 		ret =  NETDEV_TX_BUSY;
@@ -1364,9 +1361,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 	if (unlikely(err)) {
 		can_free_echo_skb(netdev, context->echo_index);
 
-		skb = NULL; /* set to NULL to avoid double free in
-			     * dev_kfree_skb(skb) */
-
 		atomic_dec(&priv->active_tx_urbs);
 		usb_unanchor_urb(urb);
 
@@ -1388,8 +1382,6 @@ releasebuf:
 	kfree(buf);
 nobufmem:
 	usb_free_urb(urb);
-nourbmem:
-	dev_kfree_skb(skb);
 	return ret;
 }
 
@@ -1502,6 +1494,10 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 	struct kvaser_usb_net_priv *priv;
 	int i, err;
 
+	err = kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, channel);
+	if (err)
+		return err;
+
 	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
 	if (!netdev) {
 		dev_err(&intf->dev, "Cannot alloc candev\n");
@@ -1588,7 +1584,7 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 {
 	struct kvaser_usb *dev;
 	int err = -ENOMEM;
-	int i;
+	int i, retry = 3;
 
 	dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
@@ -1606,10 +1602,15 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 
 	usb_set_intfdata(intf, dev);
 
-	for (i = 0; i < MAX_NET_DEVICES; i++)
-		kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, i);
+	/* On some x86 laptops, plugging a Kvaser device again after
+	 * an unplug makes the firmware always ignore the very first
+	 * command. For such a case, provide some room for retries
+	 * instead of completely exiting the driver.
+	 */
+	do {
+		err = kvaser_usb_get_software_info(dev);
+	} while (--retry && err == -ETIMEDOUT);
 
-	err = kvaser_usb_get_software_info(dev);
 	if (err) {
 		dev_err(&intf->dev,
 			"Cannot get software infos, error %d\n", err);