diff options
author | Mike Frysinger <vapier@gentoo.org> | 2011-01-10 02:54:29 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2011-01-10 13:31:12 -0800 |
commit | c6dd5098f47268976f7d0af3dad29084fd8b6b98 (patch) | |
tree | 7478f9ddede53722339ec59594229bb04abd2093 /drivers/net/bfin_mac.c | |
parent | 45b9f509b7f5d2d792b3c03b78ddc8ec543e921b (diff) | |
download | linux-c6dd5098f47268976f7d0af3dad29084fd8b6b98.tar.bz2 |
netdev: bfin_mac: clean up printk messages
Use netdev_* and pr_* helper funcs for output rather than printk.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bfin_mac.c')
-rw-r--r-- | drivers/net/bfin_mac.c | 65 |
1 files changed, 29 insertions, 36 deletions
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index ce1e5e9d06f6..a572bcb92d98 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -8,6 +8,11 @@ * Licensed under the GPL-2 or later. */ +#define DRV_VERSION "1.1" +#define DRV_DESC "Blackfin on-chip Ethernet MAC driver" + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> @@ -41,12 +46,7 @@ #include "bfin_mac.h" -#define DRV_NAME "bfin_mac" -#define DRV_VERSION "1.1" -#define DRV_AUTHOR "Bryan Wu, Luke Yang" -#define DRV_DESC "Blackfin on-chip Ethernet MAC driver" - -MODULE_AUTHOR(DRV_AUTHOR); +MODULE_AUTHOR("Bryan Wu, Luke Yang"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION(DRV_DESC); MODULE_ALIAS("platform:bfin_mac"); @@ -189,8 +189,7 @@ static int desc_list_init(void) /* allocate a new skb for next time receive */ new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN); if (!new_skb) { - printk(KERN_NOTICE DRV_NAME - ": init: low on mem - packet dropped\n"); + pr_notice("init: low on mem - packet dropped\n"); goto init_error; } skb_reserve(new_skb, NET_IP_ALIGN); @@ -240,7 +239,7 @@ static int desc_list_init(void) init_error: desc_list_free(); - printk(KERN_ERR DRV_NAME ": kmalloc failed\n"); + pr_err("kmalloc failed\n"); return -ENOMEM; } @@ -259,8 +258,7 @@ static int bfin_mdio_poll(void) while ((bfin_read_EMAC_STAADD()) & STABUSY) { udelay(1); if (timeout_cnt-- < 0) { - printk(KERN_ERR DRV_NAME - ": wait MDC/MDIO transaction to complete timeout\n"); + pr_err("wait MDC/MDIO transaction to complete timeout\n"); return -ETIMEDOUT; } } @@ -350,9 +348,9 @@ static void bfin_mac_adjust_link(struct net_device *dev) opmode &= ~RMII_10; break; default: - printk(KERN_WARNING - "%s: Ack! Speed (%d) is not 10/100!\n", - DRV_NAME, phydev->speed); + netdev_warn(dev, + "Ack! Speed (%d) is not 10/100!\n", + phydev->speed); break; } bfin_write_EMAC_OPMODE(opmode); @@ -417,14 +415,13 @@ static int mii_probe(struct net_device *dev, int phy_mode) /* now we are supposed to have a proper phydev, to attach to... */ if (!phydev) { - printk(KERN_INFO "%s: Don't found any phy device at all\n", - dev->name); + netdev_err(dev, "no phy device found\n"); return -ENODEV; } if (phy_mode != PHY_INTERFACE_MODE_RMII && phy_mode != PHY_INTERFACE_MODE_MII) { - printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name); + netdev_err(dev, "invalid phy interface mode\n"); return -EINVAL; } @@ -432,7 +429,7 @@ static int mii_probe(struct net_device *dev, int phy_mode) 0, phy_mode); if (IS_ERR(phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + netdev_err(dev, "could not attach PHY\n"); return PTR_ERR(phydev); } @@ -453,11 +450,10 @@ static int mii_probe(struct net_device *dev, int phy_mode) lp->old_duplex = -1; lp->phydev = phydev; - printk(KERN_INFO "%s: attached PHY driver [%s] " - "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)" - "@sclk=%dMHz)\n", - DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq, - MDC_CLK, mdc_div, sclk/1000000); + pr_info("attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n", + phydev->drv->name, dev_name(&phydev->dev), phydev->irq, + MDC_CLK, mdc_div, sclk/1000000); return 0; } @@ -502,7 +498,7 @@ bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - strcpy(info->driver, DRV_NAME); + strcpy(info->driver, KBUILD_MODNAME); strcpy(info->version, DRV_VERSION); strcpy(info->fw_version, "N/A"); strcpy(info->bus_info, dev_name(&dev->dev)); @@ -827,8 +823,7 @@ static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt)) udelay(1); if (timeout_cnt == 0) - printk(KERN_ERR DRV_NAME - ": fails to timestamp the TX packet\n"); + netdev_err(netdev, "timestamp the TX packet failed\n"); else { struct skb_shared_hwtstamps shhwtstamps; u64 ns; @@ -1083,8 +1078,7 @@ static void bfin_mac_rx(struct net_device *dev) * we which case we simply drop the packet */ if (current_rx_ptr->status.status_word & RX_ERROR_MASK) { - printk(KERN_NOTICE DRV_NAME - ": rx: receive error - packet dropped\n"); + netdev_notice(dev, "rx: receive error - packet dropped\n"); dev->stats.rx_dropped++; goto out; } @@ -1094,8 +1088,7 @@ static void bfin_mac_rx(struct net_device *dev) new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN); if (!new_skb) { - printk(KERN_NOTICE DRV_NAME - ": rx: low on mem - packet dropped\n"); + netdev_notice(dev, "rx: low on mem - packet dropped\n"); dev->stats.rx_dropped++; goto out; } @@ -1213,7 +1206,7 @@ static int bfin_mac_enable(struct phy_device *phydev) int ret; u32 opmode; - pr_debug("%s: %s\n", DRV_NAME, __func__); + pr_debug("%s\n", __func__); /* Set RX DMA */ bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a)); @@ -1323,7 +1316,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev) u32 sysctl; if (dev->flags & IFF_PROMISC) { - printk(KERN_INFO "%s: set to promisc mode\n", dev->name); + netdev_info(dev, "set promisc mode\n"); sysctl = bfin_read_EMAC_OPMODE(); sysctl |= PR; bfin_write_EMAC_OPMODE(sysctl); @@ -1393,7 +1386,7 @@ static int bfin_mac_open(struct net_device *dev) * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */ if (!is_valid_ether_addr(dev->dev_addr)) { - printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n"); + netdev_warn(dev, "no valid ethernet hw addr\n"); return -EINVAL; } @@ -1558,7 +1551,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev) bfin_mac_hwtstamp_init(ndev); /* now, print out the card info, in a short format.. */ - dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION); + netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION); return 0; @@ -1650,7 +1643,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev) * so set the GPIO pins to Ethernet mode */ pin_req = mii_bus_pd->mac_peripherals; - rc = peripheral_request_list(pin_req, DRV_NAME); + rc = peripheral_request_list(pin_req, KBUILD_MODNAME); if (rc) { dev_err(&pdev->dev, "Requesting peripherals failed!\n"); return rc; @@ -1739,7 +1732,7 @@ static struct platform_driver bfin_mac_driver = { .resume = bfin_mac_resume, .suspend = bfin_mac_suspend, .driver = { - .name = DRV_NAME, + .name = KBUILD_MODNAME, .owner = THIS_MODULE, }, }; |