diff options
| author | Joe Perches <joe@perches.com> | 2015-05-05 10:05:47 -0700 |
|---|---|---|
| committer | Michael Grzeschik <m.grzeschik@pengutronix.de> | 2015-09-23 08:44:22 +0200 |
| commit | cb334648a10c7fa6f0f163c22602f4dc1c6d56b4 (patch) | |
| tree | d0e27d4aa0aa5bbd2fbcfab9a4ef9ef6093cf13c /drivers/net/arcnet/com90xx.c | |
| parent | 37587fadff8ce8f40a6952f0383c571a89b29d1d (diff) | |
| download | linux-cb334648a10c7fa6f0f163c22602f4dc1c6d56b4.tar.bz2 | |
arcnet: Use normal kernel spacing style
Standardized spacing is easier to read.
git diff -w shows no differences.
objdiff shows no differences.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Diffstat (limited to 'drivers/net/arcnet/com90xx.c')
| -rw-r--r-- | drivers/net/arcnet/com90xx.c | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c index b80fbe40aa0e..a4c5d5909b13 100644 --- a/drivers/net/arcnet/com90xx.c +++ b/drivers/net/arcnet/com90xx.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) - * + * * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares <mj@ucw.cz>. * Derived from skeleton.c by Donald Becker. @@ -77,25 +77,25 @@ static int numcards; /* Amount of I/O memory used by the card */ #define BUFFER_SIZE (512) -#define MIRROR_SIZE (BUFFER_SIZE*4) +#define MIRROR_SIZE (BUFFER_SIZE * 4) /* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _CONFIG (ioaddr+2) /* Configuration register */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) +#define _INTMASK (ioaddr + 0) /* writable */ +#define _STATUS (ioaddr + 0) /* readable */ +#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */ +#define _CONFIG (ioaddr + 2) /* Configuration register */ +#define _RESET (ioaddr + 8) /* software reset (on read) */ +#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */ +#define _ADDR_HI (ioaddr + 15) /* Control registers for said */ +#define _ADDR_LO (ioaddr + 14) #undef ASTATUS #undef ACOMMAND #undef AINTMASK #define ASTATUS() inb(_STATUS) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) +#define ACOMMAND(cmd) outb((cmd), _COMMAND) +#define AINTMASK(msk) outb((msk), _INTMASK) static int com90xx_skip_probe __initdata = 0; @@ -127,12 +127,12 @@ static void __init com90xx_probe(void) if (!io && !irq && !shmem && !*device && com90xx_skip_probe) return; - shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long), + shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long), GFP_KERNEL); if (!shmems) return; - iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *), - GFP_KERNEL); + iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *), + GFP_KERNEL); if (!iomem) { kfree(shmems); return; @@ -579,7 +579,7 @@ static void com90xx_setmask(struct net_device *dev, int mask) /* * Do a hardware reset on the card, and set up necessary registers. - * + * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * |