summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c523.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/3c523.h
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/3c523.h')
-rw-r--r--drivers/net/3c523.h355
1 files changed, 355 insertions, 0 deletions
diff --git a/drivers/net/3c523.h b/drivers/net/3c523.h
new file mode 100644
index 000000000000..7292f88b48e3
--- /dev/null
+++ b/drivers/net/3c523.h
@@ -0,0 +1,355 @@
+#ifndef _3c523_INCLUDE_
+#define _3c523_INCLUDE_
+/*
+ This is basically a hacked version of ni52.h, for the 3c523
+ Etherlink/MC.
+*/
+
+/*
+ * Intel i82586 Ethernet definitions
+ *
+ * This is an extension to the Linux operating system, and is covered by the
+ * same GNU General Public License that covers that work.
+ *
+ * Copyright 1995 by Chris Beauregard (cpbeaure@undergrad.math.uwaterloo.ca)
+ *
+ * See 3c523.c for details.
+ *
+ * $Header: /home/chrisb/linux-1.2.13-3c523/drivers/net/RCS/3c523.h,v 1.6 1996/01/20 05:09:00 chrisb Exp chrisb $
+ */
+
+/*
+ * where to find the System Configuration Pointer (SCP)
+ */
+#define SCP_DEFAULT_ADDRESS 0xfffff4
+
+
+/*
+ * System Configuration Pointer Struct
+ */
+
+struct scp_struct
+{
+ unsigned short zero_dum0; /* has to be zero */
+ unsigned char sysbus; /* 0=16Bit,1=8Bit */
+ unsigned char zero_dum1; /* has to be zero for 586 */
+ unsigned short zero_dum2;
+ unsigned short zero_dum3;
+ char *iscp; /* pointer to the iscp-block */
+};
+
+
+/*
+ * Intermediate System Configuration Pointer (ISCP)
+ */
+struct iscp_struct
+{
+ unsigned char busy; /* 586 clears after successful init */
+ unsigned char zero_dummy; /* hast to be zero */
+ unsigned short scb_offset; /* pointeroffset to the scb_base */
+ char *scb_base; /* base-address of all 16-bit offsets */
+};
+
+/*
+ * System Control Block (SCB)
+ */
+struct scb_struct
+{
+ unsigned short status; /* status word */
+ unsigned short cmd; /* command word */
+ unsigned short cbl_offset; /* pointeroffset, command block list */
+ unsigned short rfa_offset; /* pointeroffset, receive frame area */
+ unsigned short crc_errs; /* CRC-Error counter */
+ unsigned short aln_errs; /* alignmenterror counter */
+ unsigned short rsc_errs; /* Resourceerror counter */
+ unsigned short ovrn_errs; /* OVerrunerror counter */
+};
+
+/*
+ * possible command values for the command word
+ */
+#define RUC_MASK 0x0070 /* mask for RU commands */
+#define RUC_NOP 0x0000 /* NOP-command */
+#define RUC_START 0x0010 /* start RU */
+#define RUC_RESUME 0x0020 /* resume RU after suspend */
+#define RUC_SUSPEND 0x0030 /* suspend RU */
+#define RUC_ABORT 0x0040 /* abort receiver operation immediately */
+
+#define CUC_MASK 0x0700 /* mask for CU command */
+#define CUC_NOP 0x0000 /* NOP-command */
+#define CUC_START 0x0100 /* start execution of 1. cmd on the CBL */
+#define CUC_RESUME 0x0200 /* resume after suspend */
+#define CUC_SUSPEND 0x0300 /* Suspend CU */
+#define CUC_ABORT 0x0400 /* abort command operation immediately */
+
+#define ACK_MASK 0xf000 /* mask for ACK command */
+#define ACK_CX 0x8000 /* acknowledges STAT_CX */
+#define ACK_FR 0x4000 /* ack. STAT_FR */
+#define ACK_CNA 0x2000 /* ack. STAT_CNA */
+#define ACK_RNR 0x1000 /* ack. STAT_RNR */
+
+/*
+ * possible status values for the status word
+ */
+#define STAT_MASK 0xf000 /* mask for cause of interrupt */
+#define STAT_CX 0x8000 /* CU finished cmd with its I bit set */
+#define STAT_FR 0x4000 /* RU finished receiving a frame */
+#define STAT_CNA 0x2000 /* CU left active state */
+#define STAT_RNR 0x1000 /* RU left ready state */
+
+#define CU_STATUS 0x700 /* CU status, 0=idle */
+#define CU_SUSPEND 0x100 /* CU is suspended */
+#define CU_ACTIVE 0x200 /* CU is active */
+
+#define RU_STATUS 0x70 /* RU status, 0=idle */
+#define RU_SUSPEND 0x10 /* RU suspended */
+#define RU_NOSPACE 0x20 /* RU no resources */
+#define RU_READY 0x40 /* RU is ready */
+
+/*
+ * Receive Frame Descriptor (RFD)
+ */
+struct rfd_struct
+{
+ unsigned short status; /* status word */
+ unsigned short last; /* Bit15,Last Frame on List / Bit14,suspend */
+ unsigned short next; /* linkoffset to next RFD */
+ unsigned short rbd_offset; /* pointeroffset to RBD-buffer */
+ unsigned char dest[6]; /* ethernet-address, destination */
+ unsigned char source[6]; /* ethernet-address, source */
+ unsigned short length; /* 802.3 frame-length */
+ unsigned short zero_dummy; /* dummy */
+};
+
+#define RFD_LAST 0x8000 /* last: last rfd in the list */
+#define RFD_SUSP 0x4000 /* last: suspend RU after */
+#define RFD_ERRMASK 0x0fe1 /* status: errormask */
+#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA */
+#define RFD_RNR 0x0200 /* status: receiver out of resources */
+
+/*
+ * Receive Buffer Descriptor (RBD)
+ */
+struct rbd_struct
+{
+ unsigned short status; /* status word,number of used bytes in buff */
+ unsigned short next; /* pointeroffset to next RBD */
+ char *buffer; /* receive buffer address pointer */
+ unsigned short size; /* size of this buffer */
+ unsigned short zero_dummy; /* dummy */
+};
+
+#define RBD_LAST 0x8000 /* last buffer */
+#define RBD_USED 0x4000 /* this buffer has data */
+#define RBD_MASK 0x3fff /* size-mask for length */
+
+/*
+ * Statusvalues for Commands/RFD
+ */
+#define STAT_COMPL 0x8000 /* status: frame/command is complete */
+#define STAT_BUSY 0x4000 /* status: frame/command is busy */
+#define STAT_OK 0x2000 /* status: frame/command is ok */
+
+/*
+ * Action-Commands
+ */
+#define CMD_NOP 0x0000 /* NOP */
+#define CMD_IASETUP 0x0001 /* initial address setup command */
+#define CMD_CONFIGURE 0x0002 /* configure command */
+#define CMD_MCSETUP 0x0003 /* MC setup command */
+#define CMD_XMIT 0x0004 /* transmit command */
+#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */
+#define CMD_DUMP 0x0006 /* dump command */
+#define CMD_DIAGNOSE 0x0007 /* diagnose command */
+
+/*
+ * Action command bits
+ */
+#define CMD_LAST 0x8000 /* indicates last command in the CBL */
+#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */
+#define CMD_INT 0x2000 /* generate interrupt after execution */
+
+/*
+ * NOP - command
+ */
+struct nop_cmd_struct
+{
+ unsigned short cmd_status; /* status of this command */
+ unsigned short cmd_cmd; /* the command itself (+bits) */
+ unsigned short cmd_link; /* offsetpointer to next command */
+};
+
+/*
+ * IA Setup command
+ */
+struct iasetup_cmd_struct
+{
+ unsigned short cmd_status;
+ unsigned short cmd_cmd;
+ unsigned short cmd_link;
+ unsigned char iaddr[6];
+};
+
+/*
+ * Configure command
+ */
+struct configure_cmd_struct
+{
+ unsigned short cmd_status;
+ unsigned short cmd_cmd;
+ unsigned short cmd_link;
+ unsigned char byte_cnt; /* size of the config-cmd */
+ unsigned char fifo; /* fifo/recv monitor */
+ unsigned char sav_bf; /* save bad frames (bit7=1)*/
+ unsigned char adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
+ unsigned char priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
+ unsigned char ifs; /* inter frame spacing */
+ unsigned char time_low; /* slot time low */
+ unsigned char time_high; /* slot time high(0-2) and max. retries(4-7) */
+ unsigned char promisc; /* promisc-mode(0) , et al (1-7) */
+ unsigned char carr_coll; /* carrier(0-3)/collision(4-7) stuff */
+ unsigned char fram_len; /* minimal frame len */
+ unsigned char dummy; /* dummy */
+};
+
+/*
+ * Multicast Setup command
+ */
+struct mcsetup_cmd_struct
+{
+ unsigned short cmd_status;
+ unsigned short cmd_cmd;
+ unsigned short cmd_link;
+ unsigned short mc_cnt; /* number of bytes in the MC-List */
+ unsigned char mc_list[0][6]; /* pointer to 6 bytes entries */
+};
+
+/*
+ * transmit command
+ */
+struct transmit_cmd_struct
+{
+ unsigned short cmd_status;
+ unsigned short cmd_cmd;
+ unsigned short cmd_link;
+ unsigned short tbd_offset; /* pointeroffset to TBD */
+ unsigned char dest[6]; /* destination address of the frame */
+ unsigned short length; /* user defined: 802.3 length / Ether type */
+};
+
+#define TCMD_ERRMASK 0x0fa0
+#define TCMD_MAXCOLLMASK 0x000f
+#define TCMD_MAXCOLL 0x0020
+#define TCMD_HEARTBEAT 0x0040
+#define TCMD_DEFERRED 0x0080
+#define TCMD_UNDERRUN 0x0100
+#define TCMD_LOSTCTS 0x0200
+#define TCMD_NOCARRIER 0x0400
+#define TCMD_LATECOLL 0x0800
+
+struct tdr_cmd_struct
+{
+ unsigned short cmd_status;
+ unsigned short cmd_cmd;
+ unsigned short cmd_link;
+ unsigned short status;
+};
+
+#define TDR_LNK_OK 0x8000 /* No link problem identified */
+#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */
+#define TDR_ET_OPN 0x2000 /* open, no correct termination */
+#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */
+#define TDR_TIMEMASK 0x07ff /* mask for the time field */
+
+/*
+ * Transmit Buffer Descriptor (TBD)
+ */
+struct tbd_struct
+{
+ unsigned short size; /* size + EOF-Flag(15) */
+ unsigned short next; /* pointeroffset to next TBD */
+ char *buffer; /* pointer to buffer */
+};
+
+#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */
+
+/*************************************************************************/
+/*
+Verbatim from the Crynwyr stuff:
+
+ The 3c523 responds with adapter code 0x6042 at slot
+registers xxx0 and xxx1. The setup register is at xxx2 and
+contains the following bits:
+
+0: card enable
+2,1: csr address select
+ 00 = 0300
+ 01 = 1300
+ 10 = 2300
+ 11 = 3300
+4,3: shared memory address select
+ 00 = 0c0000
+ 01 = 0c8000
+ 10 = 0d0000
+ 11 = 0d8000
+5: set to disable on-board thinnet
+7,6: (read-only) shows selected irq
+ 00 = 12
+ 01 = 7
+ 10 = 3
+ 11 = 9
+
+The interrupt-select register is at xxx3 and uses one bit per irq.
+
+0: int 12
+1: int 7
+2: int 3
+3: int 9
+
+ Again, the documentation stresses that the setup register
+should never be written. The interrupt-select register may be
+written with the value corresponding to bits 7.6 in
+the setup register to insure corret setup.
+*/
+
+/* Offsets from the base I/O address. */
+#define ELMC_SA 0 /* first 6 bytes are IEEE network address */
+#define ELMC_CTRL 6 /* control & status register */
+#define ELMC_REVISION 7 /* revision register, first 4 bits only */
+#define ELMC_IO_EXTENT 8
+
+/* these are the bit selects for the port register 2 */
+#define ELMC_STATUS_ENABLED 0x01
+#define ELMC_STATUS_CSR_SELECT 0x06
+#define ELMC_STATUS_MEMORY_SELECT 0x18
+#define ELMC_STATUS_DISABLE_THIN 0x20
+#define ELMC_STATUS_IRQ_SELECT 0xc0
+
+/* this is the card id used in the detection code. You might recognize
+it from @6042.adf */
+#define ELMC_MCA_ID 0x6042
+
+/*
+ The following define the bits for the control & status register
+
+ The bank select registers can be used if more than 16K of memory is
+ on the card. For some stupid reason, bank 3 is the one for the
+ bottom 16K, and the card defaults to bank 0. So we have to set the
+ bank to 3 before the card will even think of operating. To get bank
+ 3, set BS0 and BS1 to high (of course...)
+*/
+#define ELMC_CTRL_BS0 0x01 /* RW bank select */
+#define ELMC_CTRL_BS1 0x02 /* RW bank select */
+#define ELMC_CTRL_INTE 0x04 /* RW interrupt enable, assert high */
+#define ELMC_CTRL_INT 0x08 /* R interrupt active, assert high */
+/*#define ELMC_CTRL_* 0x10*/ /* reserved */
+#define ELMC_CTRL_LBK 0x20 /* RW loopback enable, assert high */
+#define ELMC_CTRL_CA 0x40 /* RW channel attention, assert high */
+#define ELMC_CTRL_RST 0x80 /* RW 82586 reset, assert low */
+
+/* some handy compound bits */
+
+/* normal operation should have bank 3 and RST high, ints enabled */
+#define ELMC_NORMAL (ELMC_CTRL_INTE|ELMC_CTRL_RST|0x3)
+
+#endif /* _3c523_INCLUDE_ */