summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@bootlin.com>2018-07-18 17:09:52 +0200
committerBoris Brezillon <boris.brezillon@bootlin.com>2018-07-19 23:12:06 +0200
commita8222a84cefa9d3595a14cf076bc8c09287bf16c (patch)
tree65e93d2d710f3edbbb7d0e089629185a7fd6dcd2 /drivers/mtd
parent6c6bc9ea84d0008024606bf5ba10519e20d851bf (diff)
downloadlinux-a8222a84cefa9d3595a14cf076bc8c09287bf16c.tar.bz2
mtd: Make Kconfig formatting consistent
Fix indentation and replace '---help---' by 'help' to make things consistent. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/Kconfig24
-rw-r--r--drivers/mtd/chips/Kconfig2
-rw-r--r--drivers/mtd/devices/Kconfig4
-rw-r--r--drivers/mtd/lpddr/Kconfig8
-rw-r--r--drivers/mtd/maps/Kconfig24
5 files changed, 31 insertions, 31 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 46ab7feec6b6..c77f537323ec 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -24,7 +24,7 @@ config MTD_TESTS
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
- ---help---
+ help
RedBoot is a ROM monitor and bootloader which deals with multiple
'images' in flash devices by putting a table one of the erase
blocks on the device, similar to a partition table, which gives
@@ -45,7 +45,7 @@ if MTD_REDBOOT_PARTS
config MTD_REDBOOT_DIRECTORY_BLOCK
int "Location of RedBoot partition table"
default "-1"
- ---help---
+ help
This option is the Linux counterpart to the
CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
option.
@@ -75,7 +75,7 @@ endif # MTD_REDBOOT_PARTS
config MTD_CMDLINE_PARTS
tristate "Command line partition table parsing"
depends on MTD
- ---help---
+ help
Allow generic configuration of the MTD partition tables via the kernel
command line. Multiple flash resources are supported for hardware where
different kinds of flash memory are available.
@@ -112,7 +112,7 @@ config MTD_CMDLINE_PARTS
config MTD_AFS_PARTS
tristate "ARM Firmware Suite partition parsing"
depends on (ARM || ARM64)
- ---help---
+ help
The ARM Firmware Suite allows the user to divide flash devices into
multiple 'images'. Each such image has a header containing its name
and offset/size etc.
@@ -136,7 +136,7 @@ config MTD_OF_PARTS
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"
- ---help---
+ help
TI AR7 partitioning support
config MTD_BCM63XX_PARTS
@@ -170,7 +170,7 @@ config MTD_BLOCK
tristate "Caching block device access to MTD devices"
depends on BLOCK
select MTD_BLKDEVS
- ---help---
+ help
Although most flash chips have an erase size too large to be useful
as block devices, it is possible to use MTD devices which are based
on RAM chips in this manner. This block device is a user of MTD
@@ -205,7 +205,7 @@ config FTL
tristate "FTL (Flash Translation Layer) support"
depends on BLOCK
select MTD_BLKDEVS
- ---help---
+ help
This provides support for the original Flash Translation Layer which
is part of the PCMCIA specification. It uses a kind of pseudo-
file system on a flash device to emulate a block device with
@@ -222,7 +222,7 @@ config NFTL
tristate "NFTL (NAND Flash Translation Layer) support"
depends on BLOCK
select MTD_BLKDEVS
- ---help---
+ help
This provides support for the NAND Flash Translation Layer which is
used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
file system on a flash device to emulate a block device with
@@ -246,7 +246,7 @@ config INFTL
tristate "INFTL (Inverse NAND Flash Translation Layer) support"
depends on BLOCK
select MTD_BLKDEVS
- ---help---
+ help
This provides support for the Inverse NAND Flash Translation
Layer which is used on M-Systems' newer DiskOnChip devices. It
uses a kind of pseudo-file system on a flash device to emulate
@@ -261,10 +261,10 @@ config INFTL
not use it.
config RFD_FTL
- tristate "Resident Flash Disk (Flash Translation Layer) support"
+ tristate "Resident Flash Disk (Flash Translation Layer) support"
depends on BLOCK
select MTD_BLKDEVS
- ---help---
+ help
This provides support for the flash translation layer known
as the Resident Flash Disk (RFD), as used by the Embedded BIOS
of General Software. There is a blurb at:
@@ -308,7 +308,7 @@ config MTD_SWAP
select MTD_BLKDEVS
help
Provides volatile block device driver on top of mtd partition
- suitable for swapping. The mapping of written blocks is not saved.
+ suitable for swapping. The mapping of written blocks is not saved.
The driver provides wear leveling by storing erase counter into the
OOB.
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index bbfa1f129266..39ec32a29051 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -44,7 +44,7 @@ choice
prompt "Flash cmd/query data swapping"
depends on MTD_CFI_ADV_OPTIONS
default MTD_CFI_NOSWAP
- ---help---
+ help
This option defines the way in which the CPU attempts to arrange
data bits when writing the 'magic' commands to the chips. Saying
'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 57b02c4b3f63..e514d57a0419 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -5,7 +5,7 @@ menu "Self-contained MTD device drivers"
config MTD_PMC551
tristate "Ramix PMC551 PCI Mezzanine RAM card support"
depends on PCI
- ---help---
+ help
This provides a MTD device driver for the Ramix PMC551 RAM PCI card
from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
These devices come in memory configurations from 32M - 1G. If you
@@ -209,7 +209,7 @@ config MTD_DOCG3
select BCH
select BCH_CONST_PARAMS
select BITREVERSE
- ---help---
+ help
This provides an MTD device driver for the M-Systems DiskOnChip
G3 devices.
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index 3a19cbee24d7..a5a332fbd593 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -13,10 +13,10 @@ config MTD_QINFO_PROBE
depends on MTD_LPDDR
tristate "Detect flash chips by QINFO probe"
help
- Device Information for LPDDR chips is offered through the Overlay
- Window QINFO interface, permits software to be used for entire
- families of devices. This serves similar purpose of CFI on legacy
- Flash products
+ Device Information for LPDDR chips is offered through the Overlay
+ Window QINFO interface, permits software to be used for entire
+ families of devices. This serves similar purpose of CFI on legacy
+ Flash products
config MTD_LPDDR2_NVM
# ARM dependency is only for writel_relaxed()
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index bdc1283f30fb..afb36bff13a7 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -207,13 +207,13 @@ config MTD_ICHXROM
BE VERY CAREFUL.
config MTD_ESB2ROM
- tristate "BIOS flash chip on Intel ESB Controller Hub 2"
- depends on X86 && MTD_JEDECPROBE && PCI
- help
- Support for treating the BIOS flash chip on ESB2 motherboards
- as an MTD device - with this you can reprogram your BIOS.
+ tristate "BIOS flash chip on Intel ESB Controller Hub 2"
+ depends on X86 && MTD_JEDECPROBE && PCI
+ help
+ Support for treating the BIOS flash chip on ESB2 motherboards
+ as an MTD device - with this you can reprogram your BIOS.
- BE VERY CAREFUL.
+ BE VERY CAREFUL.
config MTD_CK804XROM
tristate "BIOS flash chip on Nvidia CK804"
@@ -401,12 +401,12 @@ config MTD_PISMO
When built as a module, it will be called pismo.ko
config MTD_LATCH_ADDR
- tristate "Latch-assisted Flash Chip Support"
- depends on MTD_COMPLEX_MAPPINGS
- help
- Map driver which allows flashes to be partially physically addressed
- and have the upper address lines set by a board specific code.
+ tristate "Latch-assisted Flash Chip Support"
+ depends on MTD_COMPLEX_MAPPINGS
+ help
+ Map driver which allows flashes to be partially physically addressed
+ and have the upper address lines set by a board specific code.
- If compiled as a module, it will be called latch-addr-flash.
+ If compiled as a module, it will be called latch-addr-flash.
endmenu