diff options
author | Richard Weinberger <richard@nod.at> | 2017-11-02 22:29:24 +0100 |
---|---|---|
committer | Richard Weinberger <richard@nod.at> | 2017-11-02 22:29:24 +0100 |
commit | 20b2fc79a224dd4741e1481e5bff39d02a416fcc (patch) | |
tree | 03de4c5faa0c1f8626c66ed85bfa96da11ccbd9b /drivers/mtd | |
parent | 0b07194bb55ed836c2cc7c22e866b87a14681984 (diff) | |
parent | ec0a9f62b393ed0c5bb9185a8efebb0ad00b7d0d (diff) | |
download | linux-20b2fc79a224dd4741e1481e5bff39d02a416fcc.tar.bz2 |
Merge tag 'spi-nor/for-4.15' of git://git.infradead.org/l2-mtd
This pull-request contains the following notable changes:
From Cyrille:
"
Core changes:
* Introduce system power management support.
* New mechanism to select the proper .quad_enable() hook by JEDEC ID,
when needed, instead of only by manufacturer ID.
* Add support to new memory parts from Gigadevice, Winbond, Macronix and
Everspin.
Driver changes:
* Maintainance for Cadence, Intel, Mediatek and STM32 drivers.
"
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 1 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/Kconfig | 6 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/cadence-quadspi.c | 55 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/intel-spi-pci.c | 3 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/intel-spi.c | 209 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/mtk-quadspi.c | 70 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 105 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/stm32-quadspi.c | 35 |
8 files changed, 378 insertions, 106 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 00eea6fd379c..dbe6a1de2bb8 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -359,6 +359,7 @@ static const struct spi_device_id m25p_ids[] = { {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, /* Everspin MRAMs (non-JEDEC) */ + { "mr25h128" }, /* 128 Kib, 40 MHz */ { "mr25h256" }, /* 256 Kib, 40 MHz */ { "mr25h10" }, /* 1 Mib, 40 MHz */ { "mr25h40" }, /* 4 Mib, 40 MHz */ diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 69c638dd0484..89da88e59121 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -50,7 +50,7 @@ config SPI_ATMEL_QUADSPI config SPI_CADENCE_QUADSPI tristate "Cadence Quad SPI controller" - depends on OF && (ARM || COMPILE_TEST) + depends on OF && (ARM || ARM64 || COMPILE_TEST) help Enable support for the Cadence Quad SPI Flash controller. @@ -90,7 +90,7 @@ config SPI_INTEL_SPI tristate config SPI_INTEL_SPI_PCI - tristate "Intel PCH/PCU SPI flash PCI driver" if EXPERT + tristate "Intel PCH/PCU SPI flash PCI driver" depends on X86 && PCI select SPI_INTEL_SPI help @@ -106,7 +106,7 @@ config SPI_INTEL_SPI_PCI will be called intel-spi-pci. config SPI_INTEL_SPI_PLATFORM - tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT + tristate "Intel PCH/PCU SPI flash platform driver" depends on X86 select SPI_INTEL_SPI help diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 53c7d8e0327a..75a2bc447a99 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -31,6 +31,7 @@ #include <linux/of_device.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/sched.h> #include <linux/spi/spi.h> #include <linux/timer.h> @@ -38,6 +39,9 @@ #define CQSPI_NAME "cadence-qspi" #define CQSPI_MAX_CHIPSELECT 16 +/* Quirks */ +#define CQSPI_NEEDS_WR_DELAY BIT(0) + struct cqspi_st; struct cqspi_flash_pdata { @@ -75,7 +79,9 @@ struct cqspi_st { bool is_decoded_cs; u32 fifo_depth; u32 fifo_width; + bool rclk_en; u32 trigger_address; + u32 wr_delay; struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT]; }; @@ -608,6 +614,15 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, reinit_completion(&cqspi->transfer_complete); writel(CQSPI_REG_INDIRECTWR_START_MASK, reg_base + CQSPI_REG_INDIRECTWR); + /* + * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access + * Controller programming sequence, couple of cycles of + * QSPI_REF_CLK delay is required for the above bit to + * be internally synchronized by the QSPI module. Provide 5 + * cycles of delay. + */ + if (cqspi->wr_delay) + ndelay(cqspi->wr_delay); while (remaining > 0) { write_bytes = remaining > page_size ? page_size : remaining; @@ -775,7 +790,7 @@ static void cqspi_config_baudrate_div(struct cqspi_st *cqspi) } static void cqspi_readdata_capture(struct cqspi_st *cqspi, - const unsigned int bypass, + const bool bypass, const unsigned int delay) { void __iomem *reg_base = cqspi->iobase; @@ -839,7 +854,8 @@ static void cqspi_configure(struct spi_nor *nor) cqspi->sclk = sclk; cqspi_config_baudrate_div(cqspi); cqspi_delay(nor); - cqspi_readdata_capture(cqspi, 1, f_pdata->read_delay); + cqspi_readdata_capture(cqspi, !cqspi->rclk_en, + f_pdata->read_delay); } if (switch_cs || switch_ck) @@ -1036,6 +1052,8 @@ static int cqspi_of_get_pdata(struct platform_device *pdev) return -ENXIO; } + cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en"); + return 0; } @@ -1156,6 +1174,7 @@ static int cqspi_probe(struct platform_device *pdev) struct cqspi_st *cqspi; struct resource *res; struct resource *res_ahb; + unsigned long data; int ret; int irq; @@ -1206,13 +1225,24 @@ static int cqspi_probe(struct platform_device *pdev) return -ENXIO; } + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + ret = clk_prepare_enable(cqspi->clk); if (ret) { dev_err(dev, "Cannot enable QSPI clock.\n"); - return ret; + goto probe_clk_failed; } cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk); + data = (unsigned long)of_device_get_match_data(dev); + if (data & CQSPI_NEEDS_WR_DELAY) + cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC, + cqspi->master_ref_clk_hz); ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0, pdev->name, cqspi); @@ -1233,10 +1263,13 @@ static int cqspi_probe(struct platform_device *pdev) } return ret; -probe_irq_failed: - cqspi_controller_enable(cqspi, 0); probe_setup_failed: + cqspi_controller_enable(cqspi, 0); +probe_irq_failed: clk_disable_unprepare(cqspi->clk); +probe_clk_failed: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); return ret; } @@ -1253,6 +1286,9 @@ static int cqspi_remove(struct platform_device *pdev) clk_disable_unprepare(cqspi->clk); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return 0; } @@ -1284,7 +1320,14 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = { #endif static const struct of_device_id cqspi_dt_ids[] = { - {.compatible = "cdns,qspi-nor",}, + { + .compatible = "cdns,qspi-nor", + .data = (void *)0, + }, + { + .compatible = "ti,k2g-qspi", + .data = (void *)CQSPI_NEEDS_WR_DELAY, + }, { /* end of table */ } }; diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c index e82652335ede..c0976f2e3dd1 100644 --- a/drivers/mtd/spi-nor/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/intel-spi-pci.c @@ -63,7 +63,10 @@ static void intel_spi_pci_remove(struct pci_dev *pdev) } static const struct pci_device_id intel_spi_pci_ids[] = { + { PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info }, { }, }; MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids); diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 8a596bfeddff..ef034d898a23 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -67,8 +67,6 @@ #define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT) #define PR_RPE BIT(15) #define PR_BASE_MASK 0x3fff -/* Last PR is GPR0 */ -#define PR_NUM (5 + 1) /* Offsets are from @ispi->sregs */ #define SSFSTS_CTL 0x00 @@ -90,20 +88,35 @@ #define OPMENU0 0x08 #define OPMENU1 0x0c +#define OPTYPE_READ_NO_ADDR 0 +#define OPTYPE_WRITE_NO_ADDR 1 +#define OPTYPE_READ_WITH_ADDR 2 +#define OPTYPE_WRITE_WITH_ADDR 3 + /* CPU specifics */ #define BYT_PR 0x74 #define BYT_SSFSTS_CTL 0x90 #define BYT_BCR 0xfc #define BYT_BCR_WPD BIT(0) #define BYT_FREG_NUM 5 +#define BYT_PR_NUM 5 #define LPT_PR 0x74 #define LPT_SSFSTS_CTL 0x90 #define LPT_FREG_NUM 5 +#define LPT_PR_NUM 5 #define BXT_PR 0x84 #define BXT_SSFSTS_CTL 0xa0 #define BXT_FREG_NUM 12 +#define BXT_PR_NUM 6 + +#define LVSCC 0xc4 +#define UVSCC 0xc8 +#define ERASE_OPCODE_SHIFT 8 +#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT) +#define ERASE_64K_OPCODE_SHIFT 16 +#define ERASE_64K_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT) #define INTEL_SPI_TIMEOUT 5000 /* ms */ #define INTEL_SPI_FIFO_SZ 64 @@ -117,8 +130,11 @@ * @pregs: Start of protection registers * @sregs: Start of software sequencer registers * @nregions: Maximum number of regions + * @pr_num: Maximum number of protected range registers * @writeable: Is the chip writeable - * @swseq: Use SW sequencer in register reads/writes + * @locked: Is SPI setting locked + * @swseq_reg: Use SW sequencer in register reads/writes + * @swseq_erase: Use SW sequencer in erase operation * @erase_64k: 64k erase supported * @opcodes: Opcodes which are supported. This are programmed by BIOS * before it locks down the controller. @@ -132,8 +148,11 @@ struct intel_spi { void __iomem *pregs; void __iomem *sregs; size_t nregions; + size_t pr_num; bool writeable; - bool swseq; + bool locked; + bool swseq_reg; + bool swseq_erase; bool erase_64k; u8 opcodes[8]; u8 preopcodes[2]; @@ -167,7 +186,7 @@ static void intel_spi_dump_regs(struct intel_spi *ispi) for (i = 0; i < ispi->nregions; i++) dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i, readl(ispi->base + FREG(i))); - for (i = 0; i < PR_NUM; i++) + for (i = 0; i < ispi->pr_num; i++) dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i, readl(ispi->pregs + PR(i))); @@ -181,8 +200,11 @@ static void intel_spi_dump_regs(struct intel_spi *ispi) if (ispi->info->type == INTEL_SPI_BYT) dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR)); + dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC)); + dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC)); + dev_dbg(ispi->dev, "Protected regions:\n"); - for (i = 0; i < PR_NUM; i++) { + for (i = 0; i < ispi->pr_num; i++) { u32 base, limit; value = readl(ispi->pregs + PR(i)); @@ -214,7 +236,9 @@ static void intel_spi_dump_regs(struct intel_spi *ispi) } dev_dbg(ispi->dev, "Using %cW sequencer for register access\n", - ispi->swseq ? 'S' : 'H'); + ispi->swseq_reg ? 'S' : 'H'); + dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n", + ispi->swseq_erase ? 'S' : 'H'); } /* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */ @@ -278,7 +302,7 @@ static int intel_spi_wait_sw_busy(struct intel_spi *ispi) static int intel_spi_init(struct intel_spi *ispi) { - u32 opmenu0, opmenu1, val; + u32 opmenu0, opmenu1, lvscc, uvscc, val; int i; switch (ispi->info->type) { @@ -286,6 +310,8 @@ static int intel_spi_init(struct intel_spi *ispi) ispi->sregs = ispi->base + BYT_SSFSTS_CTL; ispi->pregs = ispi->base + BYT_PR; ispi->nregions = BYT_FREG_NUM; + ispi->pr_num = BYT_PR_NUM; + ispi->swseq_reg = true; if (writeable) { /* Disable write protection */ @@ -305,12 +331,15 @@ static int intel_spi_init(struct intel_spi *ispi) ispi->sregs = ispi->base + LPT_SSFSTS_CTL; ispi->pregs = ispi->base + LPT_PR; ispi->nregions = LPT_FREG_NUM; + ispi->pr_num = LPT_PR_NUM; + ispi->swseq_reg = true; break; case INTEL_SPI_BXT: ispi->sregs = ispi->base + BXT_SSFSTS_CTL; ispi->pregs = ispi->base + BXT_PR; ispi->nregions = BXT_FREG_NUM; + ispi->pr_num = BXT_PR_NUM; ispi->erase_64k = true; break; @@ -318,42 +347,64 @@ static int intel_spi_init(struct intel_spi *ispi) return -EINVAL; } - /* Disable #SMI generation */ + /* Disable #SMI generation from HW sequencer */ val = readl(ispi->base + HSFSTS_CTL); val &= ~HSFSTS_CTL_FSMIE; writel(val, ispi->base + HSFSTS_CTL); /* - * BIOS programs allowed opcodes and then locks down the register. - * So read back what opcodes it decided to support. That's the set - * we are going to support as well. + * Determine whether erase operation should use HW or SW sequencer. + * + * The HW sequencer has a predefined list of opcodes, with only the + * erase opcode being programmable in LVSCC and UVSCC registers. + * If these registers don't contain a valid erase opcode, erase + * cannot be done using HW sequencer. */ - opmenu0 = readl(ispi->sregs + OPMENU0); - opmenu1 = readl(ispi->sregs + OPMENU1); + lvscc = readl(ispi->base + LVSCC); + uvscc = readl(ispi->base + UVSCC); + if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK)) + ispi->swseq_erase = true; + /* SPI controller on Intel BXT supports 64K erase opcode */ + if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase) + if (!(lvscc & ERASE_64K_OPCODE_MASK) || + !(uvscc & ERASE_64K_OPCODE_MASK)) + ispi->erase_64k = false; /* * Some controllers can only do basic operations using hardware * sequencer. All other operations are supposed to be carried out - * using software sequencer. If we find that BIOS has programmed - * opcodes for the software sequencer we use that over the hardware - * sequencer. + * using software sequencer. */ - if (opmenu0 && opmenu1) { - for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) { - ispi->opcodes[i] = opmenu0 >> i * 8; - ispi->opcodes[i + 4] = opmenu1 >> i * 8; - } - - val = readl(ispi->sregs + PREOP_OPTYPE); - ispi->preopcodes[0] = val; - ispi->preopcodes[1] = val >> 8; - + if (ispi->swseq_reg) { /* Disable #SMI generation from SW sequencer */ val = readl(ispi->sregs + SSFSTS_CTL); val &= ~SSFSTS_CTL_FSMIE; writel(val, ispi->sregs + SSFSTS_CTL); + } + + /* Check controller's lock status */ + val = readl(ispi->base + HSFSTS_CTL); + ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN); + + if (ispi->locked) { + /* + * BIOS programs allowed opcodes and then locks down the + * register. So read back what opcodes it decided to support. + * That's the set we are going to support as well. + */ + opmenu0 = readl(ispi->sregs + OPMENU0); + opmenu1 = readl(ispi->sregs + OPMENU1); - ispi->swseq = true; + if (opmenu0 && opmenu1) { + for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) { + ispi->opcodes[i] = opmenu0 >> i * 8; + ispi->opcodes[i + 4] = opmenu1 >> i * 8; + } + + val = readl(ispi->sregs + PREOP_OPTYPE); + ispi->preopcodes[0] = val; + ispi->preopcodes[1] = val >> 8; + } } intel_spi_dump_regs(ispi); @@ -361,18 +412,28 @@ static int intel_spi_init(struct intel_spi *ispi) return 0; } -static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode) +static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype) { int i; + int preop; - for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) - if (ispi->opcodes[i] == opcode) - return i; - return -EINVAL; + if (ispi->locked) { + for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) + if (ispi->opcodes[i] == opcode) + return i; + + return -EINVAL; + } + + /* The lock is off, so just use index 0 */ + writel(opcode, ispi->sregs + OPMENU0); + preop = readw(ispi->sregs + PREOP_OPTYPE); + writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE); + + return 0; } -static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, - int len) +static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, int len) { u32 val, status; int ret; @@ -394,6 +455,9 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, return -EINVAL; } + if (len > INTEL_SPI_FIFO_SZ) + return -EINVAL; + val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT; val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; val |= HSFSTS_CTL_FGO; @@ -412,27 +476,39 @@ static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, return 0; } -static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, - int len) +static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, int len, + int optype) { - u32 val, status; + u32 val = 0, status; + u16 preop; int ret; - ret = intel_spi_opcode_index(ispi, opcode); + ret = intel_spi_opcode_index(ispi, opcode, optype); if (ret < 0) return ret; - val = (len << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; + if (len > INTEL_SPI_FIFO_SZ) + return -EINVAL; + + /* Only mark 'Data Cycle' bit when there is data to be transferred */ + if (len > 0) + val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; val |= ret << SSFSTS_CTL_COP_SHIFT; val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE; val |= SSFSTS_CTL_SCGO; + preop = readw(ispi->sregs + PREOP_OPTYPE); + if (preop) { + val |= SSFSTS_CTL_ACS; + if (preop >> 8) + val |= SSFSTS_CTL_SPOP; + } writel(val, ispi->sregs + SSFSTS_CTL); ret = intel_spi_wait_sw_busy(ispi); if (ret) return ret; - status = readl(ispi->base + SSFSTS_CTL); + status = readl(ispi->sregs + SSFSTS_CTL); if (status & SSFSTS_CTL_FCERR) return -EIO; else if (status & SSFSTS_CTL_AEL) @@ -449,10 +525,11 @@ static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) /* Address of the first chip */ writel(0, ispi->base + FADDR); - if (ispi->swseq) - ret = intel_spi_sw_cycle(ispi, opcode, buf, len); + if (ispi->swseq_reg) + ret = intel_spi_sw_cycle(ispi, opcode, len, + OPTYPE_READ_NO_ADDR); else - ret = intel_spi_hw_cycle(ispi, opcode, buf, len); + ret = intel_spi_hw_cycle(ispi, opcode, len); if (ret) return ret; @@ -467,10 +544,15 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) /* * This is handled with atomic operation and preop code in Intel - * controller so skip it here now. + * controller so skip it here now. If the controller is not locked, + * program the opcode to the PREOP register for later use. */ - if (opcode == SPINOR_OP_WREN) + if (opcode == SPINOR_OP_WREN) { + if (!ispi->locked) + writel(opcode, ispi->sregs + PREOP_OPTYPE); + return 0; + } writel(0, ispi->base + FADDR); @@ -479,9 +561,10 @@ static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) if (ret) return ret; - if (ispi->swseq) - return intel_spi_sw_cycle(ispi, opcode, buf, len); - return intel_spi_hw_cycle(ispi, opcode, buf, len); + if (ispi->swseq_reg) + return intel_spi_sw_cycle(ispi, opcode, len, + OPTYPE_WRITE_NO_ADDR); + return intel_spi_hw_cycle(ispi, opcode, len); } static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, @@ -561,12 +644,6 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT; val |= HSFSTS_CTL_FCYCLE_WRITE; - /* Write enable */ - if (ispi->preopcodes[1] == SPINOR_OP_WREN) - val |= SSFSTS_CTL_SPOP; - val |= SSFSTS_CTL_ACS; - writel(val, ispi->base + HSFSTS_CTL); - ret = intel_spi_write_block(ispi, write_buf, block_size); if (ret) { dev_err(ispi->dev, "failed to write block\n"); @@ -574,8 +651,8 @@ static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, } /* Start the write now */ - val = readl(ispi->base + HSFSTS_CTL); - writel(val | HSFSTS_CTL_FGO, ispi->base + HSFSTS_CTL); + val |= HSFSTS_CTL_FGO; + writel(val, ispi->base + HSFSTS_CTL); ret = intel_spi_wait_hw_busy(ispi); if (ret) { @@ -620,6 +697,22 @@ static int intel_spi_erase(struct spi_nor *nor, loff_t offs) erase_size = SZ_4K; } + if (ispi->swseq_erase) { + while (len > 0) { + writel(offs, ispi->base + FADDR); + + ret = intel_spi_sw_cycle(ispi, nor->erase_opcode, + 0, OPTYPE_WRITE_WITH_ADDR); + if (ret) + return ret; + + offs += erase_size; + len -= erase_size; + } + + return 0; + } + while (len > 0) { writel(offs, ispi->base + FADDR); @@ -652,7 +745,7 @@ static bool intel_spi_is_protected(const struct intel_spi *ispi, { int i; - for (i = 0; i < PR_NUM; i++) { + for (i = 0; i < ispi->pr_num; i++) { u32 pr_base, pr_limit, pr_value; pr_value = readl(ispi->pregs + PR(i)); diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c index c258c7adf1c5..abe455ccd68b 100644 --- a/drivers/mtd/spi-nor/mtk-quadspi.c +++ b/drivers/mtd/spi-nor/mtk-quadspi.c @@ -404,6 +404,29 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, return ret; } +static void mt8173_nor_disable_clk(struct mt8173_nor *mt8173_nor) +{ + clk_disable_unprepare(mt8173_nor->spi_clk); + clk_disable_unprepare(mt8173_nor->nor_clk); +} + +static int mt8173_nor_enable_clk(struct mt8173_nor *mt8173_nor) +{ + int ret; + + ret = clk_prepare_enable(mt8173_nor->spi_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(mt8173_nor->nor_clk); + if (ret) { + clk_disable_unprepare(mt8173_nor->spi_clk); + return ret; + } + + return 0; +} + static int mtk_nor_init(struct mt8173_nor *mt8173_nor, struct device_node *flash_node) { @@ -468,15 +491,11 @@ static int mtk_nor_drv_probe(struct platform_device *pdev) return PTR_ERR(mt8173_nor->nor_clk); mt8173_nor->dev = &pdev->dev; - ret = clk_prepare_enable(mt8173_nor->spi_clk); + + ret = mt8173_nor_enable_clk(mt8173_nor); if (ret) return ret; - ret = clk_prepare_enable(mt8173_nor->nor_clk); - if (ret) { - clk_disable_unprepare(mt8173_nor->spi_clk); - return ret; - } /* only support one attached flash */ flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); if (!flash_np) { @@ -487,10 +506,9 @@ static int mtk_nor_drv_probe(struct platform_device *pdev) ret = mtk_nor_init(mt8173_nor, flash_np); nor_free: - if (ret) { - clk_disable_unprepare(mt8173_nor->spi_clk); - clk_disable_unprepare(mt8173_nor->nor_clk); - } + if (ret) + mt8173_nor_disable_clk(mt8173_nor); + return ret; } @@ -498,11 +516,38 @@ static int mtk_nor_drv_remove(struct platform_device *pdev) { struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev); - clk_disable_unprepare(mt8173_nor->spi_clk); - clk_disable_unprepare(mt8173_nor->nor_clk); + mt8173_nor_disable_clk(mt8173_nor); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk_nor_suspend(struct device *dev) +{ + struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev); + + mt8173_nor_disable_clk(mt8173_nor); + return 0; } +static int mtk_nor_resume(struct device *dev) +{ + struct mt8173_nor *mt8173_nor = dev_get_drvdata(dev); + + return mt8173_nor_enable_clk(mt8173_nor); +} + +static const struct dev_pm_ops mtk_nor_dev_pm_ops = { + .suspend = mtk_nor_suspend, + .resume = mtk_nor_resume, +}; + +#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops) +#else +#define MTK_NOR_DEV_PM_OPS NULL +#endif + static const struct of_device_id mtk_nor_of_ids[] = { { .compatible = "mediatek,mt8173-nor"}, { /* sentinel */ } @@ -514,6 +559,7 @@ static struct platform_driver mtk_nor_driver = { .remove = mtk_nor_drv_remove, .driver = { .name = "mtk-nor", + .pm = MTK_NOR_DEV_PM_OPS, .of_match_table = mtk_nor_of_ids, }, }; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 19c000722cbc..bc266f70a15b 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -89,6 +89,8 @@ struct flash_info { #define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */ #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ #define USE_CLSR BIT(14) /* use CLSR command */ + + int (*quad_enable)(struct spi_nor *nor); }; #define JEDEC_MFR(info) ((info)->id[0]) @@ -870,6 +872,8 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +static int macronix_quad_enable(struct spi_nor *nor); + /* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ .id = { \ @@ -964,6 +968,7 @@ static const struct flash_info spi_nor_ids[] = { { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) }, /* Everspin */ + { "mr25h128", CAT25_INFO( 16 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, @@ -983,6 +988,11 @@ static const struct flash_info spi_nor_ids[] = { SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, { + "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, + { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) @@ -997,6 +1007,12 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + .quad_enable = macronix_quad_enable, + }, /* Intel/Numonyx -- xxxs33b */ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, @@ -1024,7 +1040,7 @@ static const struct flash_info spi_nor_ids[] = { { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, @@ -1137,6 +1153,11 @@ static const struct flash_info spi_nor_ids[] = { { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) }, { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) }, { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, + { + "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) }, { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) }, @@ -2288,8 +2309,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, /* Check the SFDP header version. */ if (le32_to_cpu(header.signature) != SFDP_SIGNATURE || - header.major != SFDP_JESD216_MAJOR || - header.minor < SFDP_JESD216_MINOR) + header.major != SFDP_JESD216_MAJOR) return -EINVAL; /* @@ -2427,6 +2447,15 @@ static int spi_nor_init_params(struct spi_nor *nor, params->quad_enable = spansion_quad_enable; break; } + + /* + * Some manufacturer like GigaDevice may use different + * bit to set QE on different memories, so the MFR can't + * indicate the quad_enable method for this case, we need + * set it in flash info list. + */ + if (info->quad_enable) + params->quad_enable = info->quad_enable; } /* Override the parameters with data read from SFDP tables. */ @@ -2630,17 +2659,60 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, /* Enable Quad I/O if needed. */ enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || spi_nor_get_protocol_width(nor->write_proto) == 4); - if (enable_quad_io && params->quad_enable) { - err = params->quad_enable(nor); + if (enable_quad_io && params->quad_enable) + nor->quad_enable = params->quad_enable; + else + nor->quad_enable = NULL; + + return 0; +} + +static int spi_nor_init(struct spi_nor *nor) +{ + int err; + + /* + * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up + * with the software protection bits set + */ + if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL || + JEDEC_MFR(nor->info) == SNOR_MFR_INTEL || + JEDEC_MFR(nor->info) == SNOR_MFR_SST || + nor->info->flags & SPI_NOR_HAS_LOCK) { + write_enable(nor); + write_sr(nor, 0); + spi_nor_wait_till_ready(nor); + } + + if (nor->quad_enable) { + err = nor->quad_enable(nor); if (err) { dev_err(nor->dev, "quad mode not supported\n"); return err; } } + if ((nor->addr_width == 4) && + (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) && + !(nor->info->flags & SPI_NOR_4B_OPCODES)) + set_4byte(nor, nor->info, 1); + return 0; } +/* mtd resume handler */ +static void spi_nor_resume(struct mtd_info *mtd) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + struct device *dev = nor->dev; + int ret; + + /* re-initialize the nor chip */ + ret = spi_nor_init(nor); + if (ret) + dev_err(dev, "resume() failed\n"); +} + int spi_nor_scan(struct spi_nor *nor, const char *name, const struct spi_nor_hwcaps *hwcaps) { @@ -2708,20 +2780,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (ret) return ret; - /* - * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up - * with the software protection bits set - */ - - if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || - JEDEC_MFR(info) == SNOR_MFR_INTEL || - JEDEC_MFR(info) == SNOR_MFR_SST || - info->flags & SPI_NOR_HAS_LOCK) { - write_enable(nor); - write_sr(nor, 0); - spi_nor_wait_till_ready(nor); - } - if (!mtd->name) mtd->name = dev_name(dev); mtd->priv = nor; @@ -2731,6 +2789,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->size = params.size; mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; + mtd->_resume = spi_nor_resume; /* NOR protection support for STmicro/Micron chips and similar */ if (JEDEC_MFR(info) == SNOR_MFR_MICRON || @@ -2804,8 +2863,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (JEDEC_MFR(info) == SNOR_MFR_SPANSION || info->flags & SPI_NOR_4B_OPCODES) spi_nor_set_4byte_opcodes(nor, info); - else - set_4byte(nor, info, 1); } else { nor->addr_width = 3; } @@ -2822,6 +2879,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, return ret; } + /* Send all the required SPI flash commands to initialize device */ + nor->info = info; + ret = spi_nor_init(nor); + if (ret) + return ret; + dev_info(dev, "%s (%lld Kbytes)\n", info->name, (long long)mtd->size >> 10); diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c index 86c0931543c5..b3c7f6addba7 100644 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -1,9 +1,22 @@ /* - * stm32_quadspi.c + * Driver for stm32 quadspi controller * - * Copyright (C) 2017, Ludovic Barre + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved + * Author(s): Ludovic Barre author <ludovic.barre@st.com>. * - * License terms: GNU General Public License (GPL), version 2 + * License terms: GPL V2.0. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License along with + * This program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/clk.h> #include <linux/errno.h> @@ -113,6 +126,7 @@ #define STM32_MAX_MMAP_SZ SZ_256M #define STM32_MAX_NORCHIP 2 +#define STM32_QSPI_FIFO_SZ 32 #define STM32_QSPI_FIFO_TIMEOUT_US 30000 #define STM32_QSPI_BUSY_TIMEOUT_US 100000 @@ -124,6 +138,7 @@ struct stm32_qspi_flash { u32 presc; u32 read_mode; bool registered; + u32 prefetch_limit; }; struct stm32_qspi { @@ -240,12 +255,12 @@ static int stm32_qspi_tx_poll(struct stm32_qspi *qspi, STM32_QSPI_FIFO_TIMEOUT_US); if (ret) { dev_err(qspi->dev, "fifo timeout (stat:%#x)\n", sr); - break; + return ret; } tx_fifo(buf++, qspi->io_base + QUADSPI_DR); } - return ret; + return 0; } static int stm32_qspi_tx_mm(struct stm32_qspi *qspi, @@ -272,6 +287,7 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash, { struct stm32_qspi *qspi = flash->qspi; u32 ccr, dcr, cr; + u32 last_byte; int err; err = stm32_qspi_wait_nobusy(qspi); @@ -314,6 +330,10 @@ static int stm32_qspi_send(struct stm32_qspi_flash *flash, if (err) goto abort; writel_relaxed(FCR_CTCF, qspi->io_base + QUADSPI_FCR); + } else { + last_byte = cmd->addr + cmd->len; + if (last_byte > flash->prefetch_limit) + goto abort; } return err; @@ -322,7 +342,9 @@ abort: cr = readl_relaxed(qspi->io_base + QUADSPI_CR) | CR_ABORT; writel_relaxed(cr, qspi->io_base + QUADSPI_CR); - dev_err(qspi->dev, "%s abort err:%d\n", __func__, err); + if (err) + dev_err(qspi->dev, "%s abort err:%d\n", __func__, err); + return err; } @@ -550,6 +572,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, } flash->fsize = FSIZE_VAL(mtd->size); + flash->prefetch_limit = mtd->size - STM32_QSPI_FIFO_SZ; flash->read_mode = CCR_FMODE_MM; if (mtd->size > qspi->mm_size) |