summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authorHuang Shijie <b32955@freescale.com>2012-09-13 14:57:59 +0800
committerDavid Woodhouse <David.Woodhouse@intel.com>2012-09-29 15:56:36 +0100
commit995fbbf563fcec058a1135bdd112ac969c817e65 (patch)
tree5c384059d0ab90fe4c001296f32ddff94ef0e6ca /drivers/mtd
parente1ca95e3a93c9a0392163a7a6791deda48b5eeca (diff)
downloadlinux-995fbbf563fcec058a1135bdd112ac969c817e65.tar.bz2
mtd: gpmi: add EDO feature for imx6q
When the frequency on the nand chip pins is above 33MHz, the nand EDO(extended Data Out) timing could be applied. The GPMI implements a Feedback read strobe to sample the read data in the EDO timing mode. This patch adds the EDO feature for the gpmi-nand driver. For some onfi nand chips, the mode 4 is the fastest; while for other onfi nand chips, the mode 5 is the fastest. This patch only adds the support for the fastest asynchronous timing mode. So this patch only supports the mode 4 and mode 5. I tested several Micron's ONFI nand chips with EDO enabled, take Micron MT29F32G08MAA for example (in mode 5, 100MHz): 1) The test result BEFORE we add the EDO feature: ================================================= mtd_speedtest: MTD device: 2 mtd_speedtest: MTD device size 209715200, eraseblock size 524288, page size 4096, count of eraseblocks 400, pages per eraseblock 128, OOB size 218 ....................................... mtd_speedtest: testing eraseblock read speed mtd_speedtest: eraseblock read speed is 3632 KiB/s ....................................... mtd_speedtest: testing page read speed mtd_speedtest: page read speed is 3554 KiB/s ....................................... mtd_speedtest: testing 2 page read speed mtd_speedtest: 2 page read speed is 3592 KiB/s ....................................... ================================================= 2) The test result AFTER we add the EDO feature: ================================================= mtd_speedtest: MTD device: 2 mtd_speedtest: MTD device size 209715200, eraseblock size 524288, page size 4096, count of eraseblocks 400, pages per eraseblock 128, OOB size 218 ....................................... mtd_speedtest: testing eraseblock read speed mtd_speedtest: eraseblock read speed is 19555 KiB/s ....................................... mtd_speedtest: testing page read speed mtd_speedtest: page read speed is 17319 KiB/s ....................................... mtd_speedtest: testing 2 page read speed mtd_speedtest: 2 page read speed is 18339 KiB/s ....................................... ================================================= 3) The read data performance is much improved by more then 5 times. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c214
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c8
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h6
3 files changed, 227 insertions, 1 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 010665ca631a..c036e51f3200 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -737,6 +737,215 @@ return_results:
return 0;
}
+/*
+ * <1> Firstly, we should know what's the GPMI-clock means.
+ * The GPMI-clock is the internal clock in the gpmi nand controller.
+ * If you set 100MHz to gpmi nand controller, the GPMI-clock's period
+ * is 10ns. Mark the GPMI-clock's period as GPMI-clock-period.
+ *
+ * <2> Secondly, we should know what's the frequency on the nand chip pins.
+ * The frequency on the nand chip pins is derived from the GPMI-clock.
+ * We can get it from the following equation:
+ *
+ * F = G / (DS + DH)
+ *
+ * F : the frequency on the nand chip pins.
+ * G : the GPMI clock, such as 100MHz.
+ * DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP
+ * DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD
+ *
+ * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz,
+ * the nand EDO(extended Data Out) timing could be applied.
+ * The GPMI implements a feedback read strobe to sample the read data.
+ * The feedback read strobe can be delayed to support the nand EDO timing
+ * where the read strobe may deasserts before the read data is valid, and
+ * read data is valid for some time after read strobe.
+ *
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ * |<---tREA---->|
+ * | |
+ * | | |
+ * |<--tRP-->| |
+ * | | |
+ * __ ___|__________________________________
+ * RDN \________/ |
+ * |
+ * /---------\
+ * Read Data --------------< >---------
+ * \---------/
+ * | |
+ * |<-D->|
+ * FeedbackRDN ________ ____________
+ * \___________/
+ *
+ * D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY.
+ *
+ *
+ * <4> Now, we begin to describe how to compute the right RDN_DELAY.
+ *
+ * 4.1) From the aspect of the nand chip pins:
+ * Delay = (tREA + C - tRP) {1}
+ *
+ * tREA : the maximum read access time. From the ONFI nand standards,
+ * we know that tREA is 16ns in mode 5, tREA is 20ns is mode 4.
+ * Please check it in : www.onfi.org
+ * C : a constant for adjust the delay. default is 4.
+ * tRP : the read pulse width.
+ * Specified by the HW_GPMI_TIMING0:DATA_SETUP:
+ * tRP = (GPMI-clock-period) * DATA_SETUP
+ *
+ * 4.2) From the aspect of the GPMI nand controller:
+ * Delay = RDN_DELAY * 0.125 * RP {2}
+ *
+ * RP : the DLL reference period.
+ * if (GPMI-clock-period > DLL_THRETHOLD)
+ * RP = GPMI-clock-period / 2;
+ * else
+ * RP = GPMI-clock-period;
+ *
+ * Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period
+ * is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD
+ * is 16ns, but in mx6q, we use 12ns.
+ *
+ * 4.3) since {1} equals {2}, we get:
+ *
+ * (tREA + 4 - tRP) * 8
+ * RDN_DELAY = --------------------- {3}
+ * RP
+ *
+ * 4.4) We only support the fastest asynchronous mode of ONFI nand.
+ * For some ONFI nand, the mode 4 is the fastest mode;
+ * while for some ONFI nand, the mode 5 is the fastest mode.
+ * So we only support the mode 4 and mode 5. It is no need to
+ * support other modes.
+ */
+static void gpmi_compute_edo_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct resources *r = &this->resources;
+ unsigned long rate = clk_get_rate(r->clock[0]);
+ int mode = this->timing_mode;
+ int dll_threshold = 16; /* in ns */
+ unsigned long delay;
+ unsigned long clk_period;
+ int t_rea;
+ int c = 4;
+ int t_rp;
+ int rp;
+
+ /*
+ * [1] for GPMI_HW_GPMI_TIMING0:
+ * The async mode requires 40MHz for mode 4, 50MHz for mode 5.
+ * The GPMI can support 100MHz at most. So if we want to
+ * get the 40MHz or 50MHz, we have to set DS=1, DH=1.
+ * Set the ADDRESS_SETUP to 0 in mode 4.
+ */
+ hw->data_setup_in_cycles = 1;
+ hw->data_hold_in_cycles = 1;
+ hw->address_setup_in_cycles = ((mode == 5) ? 1 : 0);
+
+ /* [2] for GPMI_HW_GPMI_TIMING1 */
+ hw->device_busy_timeout = 0x9000;
+
+ /* [3] for GPMI_HW_GPMI_CTRL1 */
+ hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
+
+ if (GPMI_IS_MX6Q(this))
+ dll_threshold = 12;
+
+ /*
+ * Enlarge 10 times for the numerator and denominator in {3}.
+ * This make us to get more accurate result.
+ */
+ clk_period = NSEC_PER_SEC / (rate / 10);
+ dll_threshold *= 10;
+ t_rea = ((mode == 5) ? 16 : 20) * 10;
+ c *= 10;
+
+ t_rp = clk_period * 1; /* DATA_SETUP is 1 */
+
+ if (clk_period > dll_threshold) {
+ hw->use_half_periods = 1;
+ rp = clk_period / 2;
+ } else {
+ hw->use_half_periods = 0;
+ rp = clk_period;
+ }
+
+ /*
+ * Multiply the numerator with 10, we could do a round off:
+ * 7.8 round up to 8; 7.4 round down to 7.
+ */
+ delay = (((t_rea + c - t_rp) * 8) * 10) / rp;
+ delay = (delay + 5) / 10;
+
+ hw->sample_delay_factor = delay;
+}
+
+static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
+{
+ struct resources *r = &this->resources;
+ struct nand_chip *nand = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
+ unsigned long rate;
+ int ret;
+
+ nand->select_chip(mtd, 0);
+
+ /* [1] send SET FEATURE commond to NAND */
+ feature[0] = mode;
+ ret = nand->onfi_set_features(mtd, nand,
+ ONFI_FEATURE_ADDR_TIMING_MODE, feature);
+ if (ret)
+ goto err_out;
+
+ /* [2] send GET FEATURE command to double-check the timing mode */
+ memset(feature, 0, ONFI_SUBFEATURE_PARAM_LEN);
+ ret = nand->onfi_get_features(mtd, nand,
+ ONFI_FEATURE_ADDR_TIMING_MODE, feature);
+ if (ret || feature[0] != mode)
+ goto err_out;
+
+ nand->select_chip(mtd, -1);
+
+ /* [3] set the main IO clock, 100MHz for mode 5, 80MHz for mode 4. */
+ rate = (mode == 5) ? 100000000 : 80000000;
+ clk_set_rate(r->clock[0], rate);
+
+ this->flags |= GPMI_ASYNC_EDO_ENABLED;
+ this->timing_mode = mode;
+ dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode);
+ return 0;
+
+err_out:
+ nand->select_chip(mtd, -1);
+ dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode);
+ return -EINVAL;
+}
+
+int gpmi_extra_init(struct gpmi_nand_data *this)
+{
+ struct nand_chip *chip = &this->nand;
+
+ /* Enable the asynchronous EDO feature. */
+ if (GPMI_IS_MX6Q(this) && chip->onfi_version) {
+ int mode = onfi_get_async_timing_mode(chip);
+
+ /* We only support the timing mode 4 and mode 5. */
+ if (mode & ONFI_TIMING_MODE_5)
+ mode = 5;
+ else if (mode & ONFI_TIMING_MODE_4)
+ mode = 4;
+ else
+ return 0;
+
+ return enable_edo_mode(this, mode);
+ }
+ return 0;
+}
+
/* Begin the I/O */
void gpmi_begin(struct gpmi_nand_data *this)
{
@@ -755,7 +964,10 @@ void gpmi_begin(struct gpmi_nand_data *this)
goto err_out;
}
- gpmi_nfc_compute_hardware_timing(this, &hw);
+ if (this->flags & GPMI_ASYNC_EDO_ENABLED)
+ gpmi_compute_edo_timing(this, &hw);
+ else
+ gpmi_nfc_compute_hardware_timing(this, &hw);
/* [1] Set HW_GPMI_TIMING0 */
reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 2bfd44876f81..d79696b2f19b 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1517,6 +1517,14 @@ static int gpmi_scan_bbt(struct mtd_info *mtd)
if (ret)
return ret;
+ /*
+ * Can we enable the extra features? such as EDO or Sync mode.
+ *
+ * We do not check the return value now. That's means if we fail in
+ * enable the extra features, we still can run in the normal way.
+ */
+ gpmi_extra_init(this);
+
/* use the default BBT implementation */
return nand_default_bbt(mtd);
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 5c11e761a32e..5b6d546711a6 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -122,6 +122,10 @@ struct nand_timing {
};
struct gpmi_nand_data {
+ /* flags */
+#define GPMI_ASYNC_EDO_ENABLED (1 << 0)
+ int flags;
+
/* System Interface */
struct device *dev;
struct platform_device *pdev;
@@ -132,6 +136,7 @@ struct gpmi_nand_data {
/* Flash Hardware */
struct nand_timing timing;
+ int timing_mode;
/* BCH */
struct bch_geometry bch_geometry;
@@ -259,6 +264,7 @@ extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
/* GPMI-NAND helper function library */
extern int gpmi_init(struct gpmi_nand_data *);
+extern int gpmi_extra_init(struct gpmi_nand_data *);
extern void gpmi_clear_bch(struct gpmi_nand_data *);
extern void gpmi_dump_info(struct gpmi_nand_data *);
extern int bch_set_geometry(struct gpmi_nand_data *);