Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...

2 files changed, 6 insertions, 33 deletions

diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 558071bf92de..2362909d20c0 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -573,28 +573,6 @@ static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
 
 static struct platform_driver omap2_onenand_driver;
 
-static int __adjust_timing(struct device *dev, void *data)
-{
-	int ret = 0;
-	struct omap2_onenand *c;
-
-	c = dev_get_drvdata(dev);
-
-	BUG_ON(c->setup == NULL);
-
-	/* DMA is not in use so this is all that is needed */
-	/* Revisit for OMAP3! */
-	ret = c->setup(c->onenand.base, &c->freq);
-
-	return ret;
-}
-
-int omap2_onenand_rephase(void)
-{
-	return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
-				      NULL, __adjust_timing);
-}
-
 static void omap2_onenand_shutdown(struct platform_device *pdev)
 {
 	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index b3f41f200622..1de33b5d3903 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -2556,10 +2556,6 @@ static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	int ret;
 
-	/* Check for invalid offset */
-	if (ofs > mtd->size)
-		return -EINVAL;
-
 	onenand_get_device(mtd, FL_READING);
 	ret = onenand_block_isbad_nolock(mtd, ofs, 0);
 	onenand_release_device(mtd);
@@ -3529,7 +3525,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 	unsigned die, bdry;
-	int ret, syscfg, locked;
+	int syscfg, locked;
 
 	/* Disable ECC */
 	syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
@@ -3540,7 +3536,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
 		this->wait(mtd, FL_SYNCING);
 
 		this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
-		ret = this->wait(mtd, FL_READING);
+		this->wait(mtd, FL_READING);
 
 		bdry = this->read_word(this->base + ONENAND_DATARAM);
 		if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
@@ -3550,7 +3546,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
 		this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
 
 		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
-		ret = this->wait(mtd, FL_RESETING);
+		this->wait(mtd, FL_RESETING);
 
 		printk(KERN_INFO "Die %d boundary: %d%s\n", die,
 		       this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
@@ -3734,7 +3730,7 @@ static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 
 	/* Check is boundary is locked */
 	this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
-	ret = this->wait(mtd, FL_READING);
+	this->wait(mtd, FL_READING);
 
 	thisboundary = this->read_word(this->base + ONENAND_DATARAM);
 	if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
@@ -3835,7 +3831,7 @@ static int onenand_chip_probe(struct mtd_info *mtd)
 static int onenand_probe(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
-	int maf_id, dev_id, ver_id;
+	int dev_id, ver_id;
 	int density;
 	int ret;
 
@@ -3843,8 +3839,7 @@ static int onenand_probe(struct mtd_info *mtd)
 	if (ret)
 		return ret;
 
-	/* Read manufacturer and device IDs from Register */
-	maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+	/* Device and version IDs from Register */
 	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
 	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
 	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);