diff options
author | Chuanhong Guo <gch981213@gmail.com> | 2020-02-08 15:43:50 +0800 |
---|---|---|
committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2020-03-09 14:50:19 +0100 |
commit | f1541773af49ecd1edae29c8ac0775253a0b0760 (patch) | |
tree | 7897b74fec508b5f82e994ef5fc003a4ecf3834c /drivers/mtd/nand | |
parent | a91f8170df832967dc75d5bd594c496999882e22 (diff) | |
download | linux-f1541773af49ecd1edae29c8ac0775253a0b0760.tar.bz2 |
mtd: spinand: rework detect procedure for different READ_ID operation
Currently there are 3 different variants of read_id implementation:
1. opcode only. Found in GD5FxGQ4xF.
2. opcode + 1 addr byte. Found in GD5GxGQ4xA/E
3. opcode + 1 dummy byte. Found in other currently supported chips.
Original implementation was for variant 1 and let detect function
of chips with variant 2 and 3 to ignore the first byte. This isn't
robust:
1. For chips of variant 2, if SPI master doesn't keep MOSI low
during read, chip will get a random id offset, and the entire id
buffer will shift by that offset, causing detect failure.
2. For chips of variant 1, if it happens to get a devid that equals
to manufacture id of variant 2 or 3 chips, it'll get incorrectly
detected.
This patch reworks detect procedure to address problems above. New
logic do detection for all variants separatedly, in 1-2-3 order.
Since all current detect methods do exactly the same id matching
procedure, unify them into core.c and remove detect method from
manufacture_ops.
Tested on GD5F1GQ4UAYIG and W25N01GVZEIG.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200208074439.146296-1-gch981213@gmail.com
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/spi/core.c | 86 | ||||
-rw-r--r-- | drivers/mtd/nand/spi/gigadevice.c | 45 | ||||
-rw-r--r-- | drivers/mtd/nand/spi/macronix.c | 30 | ||||
-rw-r--r-- | drivers/mtd/nand/spi/micron.c | 26 | ||||
-rw-r--r-- | drivers/mtd/nand/spi/paragon.c | 28 | ||||
-rw-r--r-- | drivers/mtd/nand/spi/toshiba.c | 45 | ||||
-rw-r--r-- | drivers/mtd/nand/spi/winbond.c | 34 |
7 files changed, 113 insertions, 181 deletions
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 89f6beefb01c..a9e9cbad942f 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -16,6 +16,7 @@ #include <linux/mtd/spinand.h> #include <linux/of.h> #include <linux/slab.h> +#include <linux/string.h> #include <linux/spi/spi.h> #include <linux/spi/spi-mem.h> @@ -370,10 +371,11 @@ out: return status & STATUS_BUSY ? -ETIMEDOUT : 0; } -static int spinand_read_id_op(struct spinand_device *spinand, u8 *buf) +static int spinand_read_id_op(struct spinand_device *spinand, u8 naddr, + u8 ndummy, u8 *buf) { - struct spi_mem_op op = SPINAND_READID_OP(0, spinand->scratchbuf, - SPINAND_MAX_ID_LEN); + struct spi_mem_op op = SPINAND_READID_OP( + naddr, ndummy, spinand->scratchbuf, SPINAND_MAX_ID_LEN); int ret; ret = spi_mem_exec_op(spinand->spimem, &op); @@ -762,24 +764,62 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = { &winbond_spinand_manufacturer, }; -static int spinand_manufacturer_detect(struct spinand_device *spinand) +static int spinand_manufacturer_match(struct spinand_device *spinand, + enum spinand_readid_method rdid_method) { + u8 *id = spinand->id.data; unsigned int i; int ret; for (i = 0; i < ARRAY_SIZE(spinand_manufacturers); i++) { - ret = spinand_manufacturers[i]->ops->detect(spinand); - if (ret > 0) { - spinand->manufacturer = spinand_manufacturers[i]; - return 0; - } else if (ret < 0) { - return ret; - } - } + const struct spinand_manufacturer *manufacturer = + spinand_manufacturers[i]; + + if (id[0] != manufacturer->id) + continue; + ret = spinand_match_and_init(spinand, + manufacturer->chips, + manufacturer->nchips, + rdid_method); + if (ret < 0) + continue; + + spinand->manufacturer = manufacturer; + return 0; + } return -ENOTSUPP; } +static int spinand_id_detect(struct spinand_device *spinand) +{ + u8 *id = spinand->id.data; + int ret; + + ret = spinand_read_id_op(spinand, 0, 0, id); + if (ret) + return ret; + ret = spinand_manufacturer_match(spinand, SPINAND_READID_METHOD_OPCODE); + if (!ret) + return 0; + + ret = spinand_read_id_op(spinand, 1, 0, id); + if (ret) + return ret; + ret = spinand_manufacturer_match(spinand, + SPINAND_READID_METHOD_OPCODE_ADDR); + if (!ret) + return 0; + + ret = spinand_read_id_op(spinand, 0, 1, id); + if (ret) + return ret; + ret = spinand_manufacturer_match(spinand, + SPINAND_READID_METHOD_OPCODE_DUMMY); + + return ret; +} + static int spinand_manufacturer_init(struct spinand_device *spinand) { if (spinand->manufacturer->ops->init) @@ -835,9 +875,9 @@ spinand_select_op_variant(struct spinand_device *spinand, * @spinand: SPI NAND object * @table: SPI NAND device description table * @table_size: size of the device description table + * @rdid_method: read id method to match * - * Should be used by SPI NAND manufacturer drivers when they want to find a - * match between a device ID retrieved through the READ_ID command and an + * Match between a device ID retrieved through the READ_ID command and an * entry in the SPI NAND description table. If a match is found, the spinand * object will be initialized with information provided by the matching * spinand_info entry. @@ -846,8 +886,10 @@ spinand_select_op_variant(struct spinand_device *spinand, */ int spinand_match_and_init(struct spinand_device *spinand, const struct spinand_info *table, - unsigned int table_size, u16 devid) + unsigned int table_size, + enum spinand_readid_method rdid_method) { + u8 *id = spinand->id.data; struct nand_device *nand = spinand_to_nand(spinand); unsigned int i; @@ -855,13 +897,17 @@ int spinand_match_and_init(struct spinand_device *spinand, const struct spinand_info *info = &table[i]; const struct spi_mem_op *op; - if (devid != info->devid) + if (rdid_method != info->devid.method) + continue; + + if (memcmp(id + 1, info->devid.id, info->devid.len)) continue; nand->memorg = table[i].memorg; nand->eccreq = table[i].eccreq; spinand->eccinfo = table[i].eccinfo; spinand->flags = table[i].flags; + spinand->id.len = 1 + table[i].devid.len; spinand->select_target = table[i].select_target; op = spinand_select_op_variant(spinand, @@ -898,13 +944,7 @@ static int spinand_detect(struct spinand_device *spinand) if (ret) return ret; - ret = spinand_read_id_op(spinand, spinand->id.data); - if (ret) - return ret; - - spinand->id.len = SPINAND_MAX_ID_LEN; - - ret = spinand_manufacturer_detect(spinand); + ret = spinand_id_detect(spinand); if (ret) { dev_err(dev, "unknown raw ID %*phN\n", SPINAND_MAX_ID_LEN, spinand->id.data); diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c index e99d425aa93f..d219c970042a 100644 --- a/drivers/mtd/nand/spi/gigadevice.c +++ b/drivers/mtd/nand/spi/gigadevice.c @@ -195,7 +195,8 @@ static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand, } static const struct spinand_info gigadevice_spinand_table[] = { - SPINAND_INFO("GD5F1GQ4xA", 0xF1, + SPINAND_INFO("GD5F1GQ4xA", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xf1), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -204,7 +205,8 @@ static const struct spinand_info gigadevice_spinand_table[] = { 0, SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout, gd5fxgq4xa_ecc_get_status)), - SPINAND_INFO("GD5F2GQ4xA", 0xF2, + SPINAND_INFO("GD5F2GQ4xA", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xf2), NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -213,7 +215,8 @@ static const struct spinand_info gigadevice_spinand_table[] = { 0, SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout, gd5fxgq4xa_ecc_get_status)), - SPINAND_INFO("GD5F4GQ4xA", 0xF4, + SPINAND_INFO("GD5F4GQ4xA", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xf4), NAND_MEMORG(1, 2048, 64, 64, 4096, 80, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -222,7 +225,8 @@ static const struct spinand_info gigadevice_spinand_table[] = { 0, SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout, gd5fxgq4xa_ecc_get_status)), - SPINAND_INFO("GD5F1GQ4UExxG", 0xd1, + SPINAND_INFO("GD5F1GQ4UExxG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xd1), NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -231,7 +235,8 @@ static const struct spinand_info gigadevice_spinand_table[] = { 0, SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout, gd5fxgq4uexxg_ecc_get_status)), - SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148, + SPINAND_INFO("GD5F1GQ4UFxxG", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48), NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f, @@ -242,39 +247,13 @@ static const struct spinand_info gigadevice_spinand_table[] = { gd5fxgq4ufxxg_ecc_get_status)), }; -static int gigadevice_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - u16 did; - int ret; - - /* - * Earlier GDF5-series devices (A,E) return [0][MID][DID] - * Later (F) devices return [MID][DID1][DID2] - */ - - if (id[0] == SPINAND_MFR_GIGADEVICE) - did = (id[1] << 8) + id[2]; - else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE) - did = id[2]; - else - return 0; - - ret = spinand_match_and_init(spinand, gigadevice_spinand_table, - ARRAY_SIZE(gigadevice_spinand_table), - did); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = { - .detect = gigadevice_spinand_detect, }; const struct spinand_manufacturer gigadevice_spinand_manufacturer = { .id = SPINAND_MFR_GIGADEVICE, .name = "GigaDevice", + .chips = gigadevice_spinand_table, + .nchips = ARRAY_SIZE(gigadevice_spinand_table), .ops = &gigadevice_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c index 21def3f8fb36..0f900f3aa21a 100644 --- a/drivers/mtd/nand/spi/macronix.c +++ b/drivers/mtd/nand/spi/macronix.c @@ -99,7 +99,8 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand, } static const struct spinand_info macronix_spinand_table[] = { - SPINAND_INFO("MX35LF1GE4AB", 0x12, + SPINAND_INFO("MX35LF1GE4AB", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x12), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -108,7 +109,8 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), - SPINAND_INFO("MX35LF2GE4AB", 0x22, + SPINAND_INFO("MX35LF2GE4AB", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x22), NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 2, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -118,33 +120,13 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)), }; -static int macronix_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Macronix SPI NAND read ID needs a dummy byte, so the first byte in - * raw_id is garbage. - */ - if (id[1] != SPINAND_MFR_MACRONIX) - return 0; - - ret = spinand_match_and_init(spinand, macronix_spinand_table, - ARRAY_SIZE(macronix_spinand_table), - id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = { - .detect = macronix_spinand_detect, }; const struct spinand_manufacturer macronix_spinand_manufacturer = { .id = SPINAND_MFR_MACRONIX, .name = "Macronix", + .chips = macronix_spinand_table, + .nchips = ARRAY_SIZE(macronix_spinand_table), .ops = ¯onix_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c index 7d7b1f7fcf71..f56f81325e10 100644 --- a/drivers/mtd/nand/spi/micron.c +++ b/drivers/mtd/nand/spi/micron.c @@ -91,7 +91,8 @@ static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand, } static const struct spinand_info micron_spinand_table[] = { - SPINAND_INFO("MT29F2G01ABAGD", 0x24, + SPINAND_INFO("MT29F2G01ABAGD", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x24), NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -102,32 +103,13 @@ static const struct spinand_info micron_spinand_table[] = { mt29f2g01abagd_ecc_get_status)), }; -static int micron_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Micron SPI NAND read ID need a dummy byte, - * so the first byte in raw_id is dummy. - */ - if (id[1] != SPINAND_MFR_MICRON) - return 0; - - ret = spinand_match_and_init(spinand, micron_spinand_table, - ARRAY_SIZE(micron_spinand_table), id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = { - .detect = micron_spinand_detect, }; const struct spinand_manufacturer micron_spinand_manufacturer = { .id = SPINAND_MFR_MICRON, .name = "Micron", + .chips = micron_spinand_table, + .nchips = ARRAY_SIZE(micron_spinand_table), .ops = µn_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/paragon.c b/drivers/mtd/nand/spi/paragon.c index 52307681cbd0..519ade513c1f 100644 --- a/drivers/mtd/nand/spi/paragon.c +++ b/drivers/mtd/nand/spi/paragon.c @@ -97,7 +97,8 @@ static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = { static const struct spinand_info paragon_spinand_table[] = { - SPINAND_INFO("PN26G01A", 0xe1, + SPINAND_INFO("PN26G01A", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xe1), NAND_MEMORG(1, 2048, 128, 64, 1024, 21, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -106,7 +107,8 @@ static const struct spinand_info paragon_spinand_table[] = { 0, SPINAND_ECCINFO(&pn26g0xa_ooblayout, pn26g0xa_ecc_get_status)), - SPINAND_INFO("PN26G02A", 0xe2, + SPINAND_INFO("PN26G02A", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xe2), NAND_MEMORG(1, 2048, 128, 64, 2048, 41, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -117,31 +119,13 @@ static const struct spinand_info paragon_spinand_table[] = { pn26g0xa_ecc_get_status)), }; -static int paragon_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* Read ID returns [0][MID][DID] */ - - if (id[1] != SPINAND_MFR_PARAGON) - return 0; - - ret = spinand_match_and_init(spinand, paragon_spinand_table, - ARRAY_SIZE(paragon_spinand_table), - id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = { - .detect = paragon_spinand_detect, }; const struct spinand_manufacturer paragon_spinand_manufacturer = { .id = SPINAND_MFR_PARAGON, .name = "Paragon", + .chips = paragon_spinand_table, + .nchips = ARRAY_SIZE(paragon_spinand_table), .ops = ¶gon_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c index 833e8f64e0a0..d34773191700 100644 --- a/drivers/mtd/nand/spi/toshiba.c +++ b/drivers/mtd/nand/spi/toshiba.c @@ -96,7 +96,8 @@ static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand, static const struct spinand_info toshiba_spinand_table[] = { /* 3.3V 1Gb */ - SPINAND_INFO("TC58CVG0S3", 0xC2, + SPINAND_INFO("TC58CVG0S3", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xC2), NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -106,7 +107,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tc58cxgxsx_ooblayout, tc58cxgxsx_ecc_get_status)), /* 3.3V 2Gb */ - SPINAND_INFO("TC58CVG1S3", 0xCB, + SPINAND_INFO("TC58CVG1S3", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xCB), NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -116,7 +118,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tc58cxgxsx_ooblayout, tc58cxgxsx_ecc_get_status)), /* 3.3V 4Gb */ - SPINAND_INFO("TC58CVG2S0", 0xCD, + SPINAND_INFO("TC58CVG2S0", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xCD), NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -126,7 +129,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tc58cxgxsx_ooblayout, tc58cxgxsx_ecc_get_status)), /* 3.3V 4Gb */ - SPINAND_INFO("TC58CVG2S0", 0xED, + SPINAND_INFO("TC58CVG2S0", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xED), NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -136,7 +140,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tc58cxgxsx_ooblayout, tc58cxgxsx_ecc_get_status)), /* 1.8V 1Gb */ - SPINAND_INFO("TC58CYG0S3", 0xB2, + SPINAND_INFO("TC58CYG0S3", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xB2), NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -146,7 +151,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tc58cxgxsx_ooblayout, tc58cxgxsx_ecc_get_status)), /* 1.8V 2Gb */ - SPINAND_INFO("TC58CYG1S3", 0xBB, + SPINAND_INFO("TC58CYG1S3", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xBB), NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -156,7 +162,8 @@ static const struct spinand_info toshiba_spinand_table[] = { SPINAND_ECCINFO(&tc58cxgxsx_ooblayout, tc58cxgxsx_ecc_get_status)), /* 1.8V 4Gb */ - SPINAND_INFO("TC58CYG2S0", 0xBD, + SPINAND_INFO("TC58CYG2S0", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xBD), NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -167,33 +174,13 @@ static const struct spinand_info toshiba_spinand_table[] = { tc58cxgxsx_ecc_get_status)), }; -static int toshiba_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Toshiba SPI NAND read ID needs a dummy byte, - * so the first byte in id is garbage. - */ - if (id[1] != SPINAND_MFR_TOSHIBA) - return 0; - - ret = spinand_match_and_init(spinand, toshiba_spinand_table, - ARRAY_SIZE(toshiba_spinand_table), - id[2]); - if (ret) - return ret; - - return 1; -} - static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = { - .detect = toshiba_spinand_detect, }; const struct spinand_manufacturer toshiba_spinand_manufacturer = { .id = SPINAND_MFR_TOSHIBA, .name = "Toshiba", + .chips = toshiba_spinand_table, + .nchips = ARRAY_SIZE(toshiba_spinand_table), .ops = &toshiba_spinand_manuf_ops, }; diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index a6c17e0cace8..76684428354e 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -75,7 +75,8 @@ static int w25m02gv_select_target(struct spinand_device *spinand, } static const struct spinand_info winbond_spinand_table[] = { - SPINAND_INFO("W25M02GV", 0xAB, + SPINAND_INFO("W25M02GV", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -84,7 +85,8 @@ static const struct spinand_info winbond_spinand_table[] = { 0, SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL), SPINAND_SELECT_TARGET(w25m02gv_select_target)), - SPINAND_INFO("W25N01GV", 0xAA, + SPINAND_INFO("W25N01GV", + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -94,31 +96,6 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)), }; -/** - * winbond_spinand_detect - initialize device related part in spinand_device - * struct if it is a Winbond device. - * @spinand: SPI NAND device structure - */ -static int winbond_spinand_detect(struct spinand_device *spinand) -{ - u8 *id = spinand->id.data; - int ret; - - /* - * Winbond SPI NAND read ID need a dummy byte, - * so the first byte in raw_id is dummy. - */ - if (id[1] != SPINAND_MFR_WINBOND) - return 0; - - ret = spinand_match_and_init(spinand, winbond_spinand_table, - ARRAY_SIZE(winbond_spinand_table), id[2]); - if (ret) - return ret; - - return 1; -} - static int winbond_spinand_init(struct spinand_device *spinand) { struct nand_device *nand = spinand_to_nand(spinand); @@ -138,12 +115,13 @@ static int winbond_spinand_init(struct spinand_device *spinand) } static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = { - .detect = winbond_spinand_detect, .init = winbond_spinand_init, }; const struct spinand_manufacturer winbond_spinand_manufacturer = { .id = SPINAND_MFR_WINBOND, .name = "Winbond", + .chips = winbond_spinand_table, + .nchips = ARRAY_SIZE(winbond_spinand_table), .ops = &winbond_spinand_manuf_ops, }; |