summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/nand_base.c
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@free-electrons.com>2017-06-02 12:18:24 +0200
committerBoris Brezillon <boris.brezillon@free-electrons.com>2017-08-23 16:49:13 +0200
commitf84674b82af2c3ea68b9032d1244f364e46cc75d (patch)
tree49db1b4edc879c7231ddad640cae38db5bcd446c /drivers/mtd/nand/nand_base.c
parentd4cb37e71662dac72049bf7c55a9038bd7d2bcb5 (diff)
downloadlinux-f84674b82af2c3ea68b9032d1244f364e46cc75d.tar.bz2
mtd: nand: Fix various memory leaks in core
The nand_scan_ident() function is not expected to allocate resources, and people are usually not calling nand_cleanup() if something fails between nand_scan_ident() and nand_scan_tail(). Move all functions that may allocate resource to the nand_scan_tail() path to prevent such resource leaks. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Diffstat (limited to 'drivers/mtd/nand/nand_base.c')
-rw-r--r--drivers/mtd/nand/nand_base.c118
1 files changed, 56 insertions, 62 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 54d6194fb180..abcb15fba484 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3856,7 +3856,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
const struct nand_manufacturer *manufacturer;
struct mtd_info *mtd = nand_to_mtd(chip);
int busw;
- int i, ret;
+ int i;
u8 *id_data = chip->id.data;
u8 maf_id, dev_id;
@@ -3997,10 +3997,6 @@ ident_done:
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- ret = nand_manufacturer_init(chip);
- if (ret)
- return ret;
-
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
maf_id, dev_id);
@@ -4208,23 +4204,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
return ret;
}
- /* Initialize the ->data_interface field. */
- ret = nand_init_data_interface(chip);
- if (ret)
- goto err_nand_init;
-
- /*
- * Setup the data interface correctly on the chip and controller side.
- * This explicit call to nand_setup_data_interface() is only required
- * for the first die, because nand_reset() has been called before
- * ->data_interface and ->default_onfi_timing_mode were set.
- * For the other dies, nand_reset() will automatically switch to the
- * best mode for us.
- */
- ret = nand_setup_data_interface(chip, 0);
- if (ret)
- goto err_nand_init;
-
nand_maf_id = chip->id.data[0];
nand_dev_id = chip->id.data[1];
@@ -4254,12 +4233,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
mtd->size = i * chip->chipsize;
return 0;
-
-err_nand_init:
- /* Free manufacturer priv data. */
- nand_manufacturer_cleanup(chip);
-
- return ret;
}
EXPORT_SYMBOL(nand_scan_ident);
@@ -4646,55 +4619,60 @@ int nand_scan_tail(struct mtd_info *mtd)
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct nand_buffers *nbuf = NULL;
- int ret;
+ int ret, i;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
if (WARN_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
!(chip->bbt_options & NAND_BBT_USE_FLASH))) {
- ret = -EINVAL;
- goto err_ident;
+ return -EINVAL;
}
if (invalid_ecc_page_accessors(chip)) {
pr_err("Invalid ECC page accessors setup\n");
- ret = -EINVAL;
- goto err_ident;
+ return -EINVAL;
}
if (!(chip->options & NAND_OWN_BUFFERS)) {
nbuf = kzalloc(sizeof(*nbuf), GFP_KERNEL);
- if (!nbuf) {
- ret = -ENOMEM;
- goto err_ident;
- }
+ if (!nbuf)
+ return -ENOMEM;
nbuf->ecccalc = kmalloc(mtd->oobsize, GFP_KERNEL);
if (!nbuf->ecccalc) {
ret = -ENOMEM;
- goto err_free;
+ goto err_free_nbuf;
}
nbuf->ecccode = kmalloc(mtd->oobsize, GFP_KERNEL);
if (!nbuf->ecccode) {
ret = -ENOMEM;
- goto err_free;
+ goto err_free_nbuf;
}
nbuf->databuf = kmalloc(mtd->writesize + mtd->oobsize,
GFP_KERNEL);
if (!nbuf->databuf) {
ret = -ENOMEM;
- goto err_free;
+ goto err_free_nbuf;
}
chip->buffers = nbuf;
- } else {
- if (!chip->buffers) {
- ret = -ENOMEM;
- goto err_ident;
- }
+ } else if (!chip->buffers) {
+ return -ENOMEM;
}
+ /*
+ * FIXME: some NAND manufacturer drivers expect the first die to be
+ * selected when manufacturer->init() is called. They should be fixed
+ * to explictly select the relevant die when interacting with the NAND
+ * chip.
+ */
+ chip->select_chip(mtd, 0);
+ ret = nand_manufacturer_init(chip);
+ chip->select_chip(mtd, -1);
+ if (ret)
+ goto err_free_nbuf;
+
/* Set the internal oob buffer location, just after the page data */
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
@@ -4716,7 +4694,7 @@ int nand_scan_tail(struct mtd_info *mtd)
WARN(1, "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
}
@@ -4731,7 +4709,7 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
if (!ecc->read_page)
ecc->read_page = nand_read_page_hwecc_oob_first;
@@ -4763,7 +4741,7 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->write_page == nand_write_page_hwecc)) {
WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
/* Use standard syndrome read/write page function? */
if (!ecc->read_page)
@@ -4783,7 +4761,7 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!ecc->strength) {
WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
break;
}
@@ -4796,7 +4774,7 @@ int nand_scan_tail(struct mtd_info *mtd)
ret = nand_set_ecc_soft_ops(mtd);
if (ret) {
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
break;
@@ -4804,7 +4782,7 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!ecc->read_page || !ecc->write_page) {
WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
if (!ecc->read_oob)
ecc->read_oob = nand_read_oob_std;
@@ -4828,7 +4806,7 @@ int nand_scan_tail(struct mtd_info *mtd)
default:
WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
/* For many systems, the standard OOB write also works for raw */
@@ -4849,13 +4827,13 @@ int nand_scan_tail(struct mtd_info *mtd)
if (ecc->steps * ecc->size != mtd->writesize) {
WARN(1, "Invalid ECC parameters\n");
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
ecc->total = ecc->steps * ecc->bytes;
if (ecc->total > mtd->oobsize) {
WARN(1, "Total number of ECC bytes exceeded oobsize\n");
ret = -EINVAL;
- goto err_free;
+ goto err_nand_manuf_cleanup;
}
/*
@@ -4937,6 +4915,21 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!mtd->bitflip_threshold)
mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
+ /* Initialize the ->data_interface field. */
+ ret = nand_init_data_interface(chip);
+ if (ret)
+ goto err_nand_manuf_cleanup;
+
+ /* Enter fastest possible mode on all dies. */
+ for (i = 0; i < chip->numchips; i++) {
+ chip->select_chip(mtd, i);
+ ret = nand_setup_data_interface(chip, i);
+ chip->select_chip(mtd, -1);
+
+ if (ret)
+ goto err_nand_data_iface_cleanup;
+ }
+
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
return 0;
@@ -4944,10 +4937,17 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Build bad block table */
ret = chip->scan_bbt(mtd);
if (ret)
- goto err_free;
+ goto err_nand_data_iface_cleanup;
+
return 0;
-err_free:
+err_nand_data_iface_cleanup:
+ nand_release_data_interface(chip);
+
+err_nand_manuf_cleanup:
+ nand_manufacturer_cleanup(chip);
+
+err_free_nbuf:
if (nbuf) {
kfree(nbuf->databuf);
kfree(nbuf->ecccode);
@@ -4955,12 +4955,6 @@ err_free:
kfree(nbuf);
}
-err_ident:
- /* Clean up nand_scan_ident(). */
-
- /* Free manufacturer priv data. */
- nand_manufacturer_cleanup(chip);
-
return ret;
}
EXPORT_SYMBOL(nand_scan_tail);