diff options
| author | Pavan Kunapuli <pkunapuli@nvidia.com> | 2015-01-28 11:45:16 -0500 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2015-01-29 11:21:58 +0100 |
| commit | 352ee868dda03ca72e60d4853356881ff161ec23 (patch) | |
| tree | 67cfefe825be4832549c896202cb3c8aedee3403 /drivers/mmc | |
| parent | 0501be6429e4eb02f417ad83eacd84b8c57b0283 (diff) | |
| download | linux-352ee868dda03ca72e60d4853356881ff161ec23.tar.bz2 | |
mmc: tegra: Write xfer_mode, CMD regs in together
If there is a gap between xfer mode and command register writes,
tegra SDMMC controller can sometimes issue a spurious command before
the CMD register is written. To avoid this, these two registers need
to be written together in a single write operation.
This is implemented as an NVQUIRK as it applies to T114, T124 and
T132.
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-tegra.c | 30 |
1 files changed, 29 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 59797106af93..f3778d58d1cd 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -41,6 +41,7 @@ #define NVQUIRK_DISABLE_SDR50 BIT(3) #define NVQUIRK_DISABLE_SDR104 BIT(4) #define NVQUIRK_DISABLE_DDR50 BIT(5) +#define NVQUIRK_SHADOW_XFER_MODE_REG BIT(6) struct sdhci_tegra_soc_data { const struct sdhci_pltfm_data *pdata; @@ -67,6 +68,31 @@ static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) return readw(host->ioaddr + reg); } +static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + + if (soc_data->nvquirks & NVQUIRK_SHADOW_XFER_MODE_REG) { + switch (reg) { + case SDHCI_TRANSFER_MODE: + /* + * Postpone this write, we must do it together with a + * command write that is down below. + */ + pltfm_host->xfer_mode_shadow = val; + return; + case SDHCI_COMMAND: + writel((val << 16) | pltfm_host->xfer_mode_shadow, + host->ioaddr + SDHCI_TRANSFER_MODE); + return; + } + } + + writew(val, host->ioaddr + reg); +} + static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -147,6 +173,7 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width) static const struct sdhci_ops tegra_sdhci_ops = { .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, + .write_w = tegra_sdhci_writew, .write_l = tegra_sdhci_writel, .set_clock = sdhci_set_clock, .set_bus_width = tegra_sdhci_set_bus_width, @@ -201,7 +228,8 @@ static struct sdhci_tegra_soc_data soc_data_tegra114 = { .pdata = &sdhci_tegra114_pdata, .nvquirks = NVQUIRK_DISABLE_SDR50 | NVQUIRK_DISABLE_DDR50 | - NVQUIRK_DISABLE_SDR104, + NVQUIRK_DISABLE_SDR104 | + NVQUIRK_SHADOW_XFER_MODE_REG, }; static const struct of_device_id sdhci_tegra_dt_match[] = { |