summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorHeiner Kallweit <hkallweit1@gmail.com>2017-02-07 22:34:32 +0100
committerUlf Hansson <ulf.hansson@linaro.org>2017-02-14 09:10:55 +0100
commit5da86887638d7a833c75880b7fd8ba738aa102a7 (patch)
treebff55d8b6dff3f320f9d6fec1174e4387599a593 /drivers/mmc
parent3d45c86f92be4cd22b4d2332a5cc280e20efedc6 (diff)
downloadlinux-5da86887638d7a833c75880b7fd8ba738aa102a7.tar.bz2
mmc: meson-gx: improve meson_mmc_clk_set
The following changes are quite small, therefore I combined them in one patch. - ret doesn't need to be initialized with 0 - use standard !clk_rate notation to check for a zero value - If clk_rate is zero we return here. Therefore all further checks in this function for clk_rate != 0 are not needed. - switch from dev_warn to dev_err if the clock can't be set - If due to clock source and available divider values the requested frequency isn't matched exactly (always the case if requested frequency is 52 MHz), then just print the differing values as debug message and not as warning. - Also remove ret from the message as it is always 0. - Set member current_clock to the current requested rate and mmc->actual_clock to the current actual rate Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/meson-gx-mmc.c42
1 files changed, 24 insertions, 18 deletions
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 9d79df7ca214..d6a4dfae5ed7 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -132,6 +132,7 @@ struct meson_host {
struct clk_mux mux;
struct clk *mux_clk;
struct clk *mux_parent[MUX_CLK_NUM_PARENTS];
+ unsigned long current_clock;
struct clk_divider cfg_div;
struct clk *cfg_div_clk;
@@ -178,7 +179,7 @@ struct sd_emmc_desc {
static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
{
struct mmc_host *mmc = host->mmc;
- int ret = 0;
+ int ret;
u32 cfg;
if (clk_rate) {
@@ -188,7 +189,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
clk_rate = mmc->f_min;
}
- if (clk_rate == mmc->actual_clock)
+ if (clk_rate == host->current_clock)
return 0;
/* stop clock */
@@ -201,29 +202,34 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
dev_dbg(host->dev, "change clock rate %u -> %lu\n",
mmc->actual_clock, clk_rate);
- if (clk_rate == 0) {
+ if (!clk_rate) {
mmc->actual_clock = 0;
+ host->current_clock = 0;
+ /* return with clock being stopped */
return 0;
}
ret = clk_set_rate(host->cfg_div_clk, clk_rate);
- if (ret)
- dev_warn(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
- clk_rate, ret);
- else if (clk_rate && clk_rate != clk_get_rate(host->cfg_div_clk))
- dev_warn(host->dev, "divider requested rate %lu != actual rate %lu: ret=%d\n",
- clk_rate, clk_get_rate(host->cfg_div_clk), ret);
- else
- mmc->actual_clock = clk_rate;
-
- /* (re)start clock, if non-zero */
- if (!ret && clk_rate) {
- cfg = readl(host->regs + SD_EMMC_CFG);
- cfg &= ~CFG_STOP_CLOCK;
- writel(cfg, host->regs + SD_EMMC_CFG);
+ if (ret) {
+ dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
+ clk_rate, ret);
+ return ret;
}
- return ret;
+ mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
+ host->current_clock = clk_rate;
+
+ if (clk_rate != mmc->actual_clock)
+ dev_dbg(host->dev,
+ "divider requested rate %lu != actual rate %u\n",
+ clk_rate, mmc->actual_clock);
+
+ /* (re)start clock */
+ cfg = readl(host->regs + SD_EMMC_CFG);
+ cfg &= ~CFG_STOP_CLOCK;
+ writel(cfg, host->regs + SD_EMMC_CFG);
+
+ return 0;
}
/*