summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorDaniel Drake <drake@endlessm.com>2019-04-01 13:42:15 +0800
committerUlf Hansson <ulf.hansson@linaro.org>2019-04-15 11:55:54 +0200
commitc278150e0d2a4ac0551f86c9db042665ad51c1e4 (patch)
tree832f161506fb840e67b10eda51b1a255b89cffb8 /drivers/mmc
parente374e87538f4c7cd364bce6b9048ad5829ccc604 (diff)
downloadlinux-c278150e0d2a4ac0551f86c9db042665ad51c1e4.tar.bz2
mmc: alcor: enable DMA transfer of large buffers
DMA on this hardware is limited to dealing with a single page at a time. Previously, the driver was set up accordingly to request single-page DMA buffers, however that had the effect of generating a large number of small MMC requests for data I/O. Improve the driver to accept scatter-gather DMA buffers of larger sizes. Iterate through those buffers a page at a time. Testing with dd, this increases write performance from 2mb/sec to 10mb/sec, and increases read performance from 4mb/sec to 14mb/sec. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/alcor.c88
1 files changed, 35 insertions, 53 deletions
diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c
index 3e2efbf3cf8c..ddcdab14707c 100644
--- a/drivers/mmc/host/alcor.c
+++ b/drivers/mmc/host/alcor.c
@@ -54,9 +54,9 @@ struct alcor_sdmmc_host {
struct delayed_work timeout_work;
struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ struct sg_dma_page_iter sg_diter; /* SG state for DMA */
struct scatterlist *sg;
unsigned int blocks; /* remaining PIO blocks */
- int sg_count;
u32 irq_status_sd;
unsigned char cur_power_mode;
@@ -117,30 +117,19 @@ static void alcor_reset(struct alcor_sdmmc_host *host, u8 val)
dev_err(host->dev, "%s: timeout\n", __func__);
}
+/*
+ * Perform DMA I/O of a single page.
+ */
static void alcor_data_set_dma(struct alcor_sdmmc_host *host)
{
struct alcor_pci_priv *priv = host->alcor_pci;
- u32 addr;
-
- if (!host->sg_count)
- return;
+ dma_addr_t addr;
- if (!host->sg) {
- dev_err(host->dev, "have blocks, but no SG\n");
+ if (!__sg_page_iter_dma_next(&host->sg_diter))
return;
- }
- if (!sg_dma_len(host->sg)) {
- dev_err(host->dev, "DMA SG len == 0\n");
- return;
- }
-
-
- addr = (u32)sg_dma_address(host->sg);
-
- alcor_write32(priv, addr, AU6601_REG_SDMA_ADDR);
- host->sg = sg_next(host->sg);
- host->sg_count--;
+ addr = sg_page_iter_dma_address(&host->sg_diter);
+ alcor_write32(priv, (u32) addr, AU6601_REG_SDMA_ADDR);
}
static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host)
@@ -153,12 +142,29 @@ static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host)
ctrl |= AU6601_DATA_WRITE;
if (data->host_cookie == COOKIE_MAPPED) {
+ /*
+ * For DMA transfers, this function is called just once,
+ * at the start of the operation. The hardware can only
+ * perform DMA I/O on a single page at a time, so here
+ * we kick off the transfer with the first page, and expect
+ * subsequent pages to be transferred upon IRQ events
+ * indicating that the single-page DMA was completed.
+ */
+ __sg_page_iter_start(&host->sg_diter.base, data->sg,
+ data->sg_len, 0);
+
alcor_data_set_dma(host);
ctrl |= AU6601_DATA_DMA_MODE;
host->dma_on = 1;
- alcor_write32(priv, data->sg_count * 0x1000,
+ alcor_write32(priv, data->blksz * data->blocks,
AU6601_REG_BLOCK_SIZE);
} else {
+ /*
+ * For PIO transfers, we break down each operation
+ * into several sector-sized transfers. When one sector has
+ * complete, the IRQ handler will call this function again
+ * to kick off the transfer of the next sector.
+ */
alcor_write32(priv, data->blksz, AU6601_REG_BLOCK_SIZE);
}
@@ -233,9 +239,8 @@ static void alcor_prepare_data(struct alcor_sdmmc_host *host,
host->data->bytes_xfered = 0;
host->blocks = data->blocks;
host->sg = data->sg;
- host->sg_count = data->sg_count;
dev_dbg(host->dev, "prepare DATA: sg %i, blocks: %i\n",
- host->sg_count, host->blocks);
+ data->sg_count, host->blocks);
if (data->host_cookie != COOKIE_MAPPED)
alcor_prepare_sg_miter(host);
@@ -484,9 +489,6 @@ static int alcor_data_irq_done(struct alcor_sdmmc_host *host, u32 intmask)
alcor_trf_block_pio(host, false);
return 1;
case AU6601_INT_DMA_END:
- if (!host->sg_count)
- break;
-
alcor_data_set_dma(host);
break;
default:
@@ -523,8 +525,7 @@ static void alcor_data_irq_thread(struct alcor_sdmmc_host *host, u32 intmask)
if (alcor_data_irq_done(host, intmask))
return;
- if ((intmask & AU6601_INT_DATA_END) || !host->blocks ||
- (host->dma_on && !host->sg_count))
+ if ((intmask & AU6601_INT_DATA_END) || !host->blocks || host->dma_on)
alcor_finish_data(host);
}
@@ -762,8 +763,7 @@ static void alcor_pre_req(struct mmc_host *mmc,
struct alcor_sdmmc_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
struct mmc_command *cmd = mrq->cmd;
- struct scatterlist *sg;
- unsigned int i, sg_len;
+ unsigned int sg_len;
if (!data || !cmd)
return;
@@ -785,11 +785,6 @@ static void alcor_pre_req(struct mmc_host *mmc,
if (data->blksz & 3)
return;
- for_each_sg(data->sg, sg, data->sg_len, i) {
- if (sg->length != AU6601_MAX_DMA_BLOCK_SIZE)
- return;
- }
-
/* This data might be unmapped at this time */
sg_len = dma_map_sg(host->dev, data->sg, data->sg_len,
@@ -1037,26 +1032,13 @@ static void alcor_init_mmc(struct alcor_sdmmc_host *host)
mmc->caps2 = MMC_CAP2_NO_SDIO;
mmc->ops = &alcor_sdc_ops;
- /* The hardware does DMA data transfer of 4096 bytes to/from a single
- * buffer address. Scatterlists are not supported, but upon DMA
- * completion (signalled via IRQ), the original vendor driver does
- * then immediately set up another DMA transfer of the next 4096
- * bytes.
- *
- * This means that we need to handle the I/O in 4096 byte chunks.
- * Lacking a way to limit the sglist entries to 4096 bytes, we instead
- * impose that only one segment is provided, with maximum size 4096,
- * which also happens to be the minimum size. This means that the
- * single-entry sglist handled by this driver can be handed directly
- * to the hardware, nice and simple.
- *
- * Unfortunately though, that means we only do 4096 bytes I/O per
- * MMC command. A future improvement would be to make the driver
- * accept sg lists and entries of any size, and simply iterate
- * through them 4096 bytes at a time.
+ /*
+ * Enable large requests through iteration of scatterlist pages.
+ * Limit to 240 sectors per request like the original vendor driver.
*/
- mmc->max_segs = AU6601_MAX_DMA_SEGMENTS;
- mmc->max_seg_size = AU6601_MAX_DMA_BLOCK_SIZE;
+ mmc->max_segs = 64;
+ mmc->max_seg_size = 240 * 512;
+ mmc->max_blk_count = 240;
mmc->max_req_size = mmc->max_seg_size;
}