diff options
| author | Michael Walle <michael@walle.cc> | 2016-11-15 11:13:16 +0100 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2016-11-18 14:41:47 +0100 |
| commit | b0921d5c9ed6ffa8a4d6afc5ee5f136b87445f14 (patch) | |
| tree | f9566c3945231eea57649951897b82d461c0db4d /drivers/mmc | |
| parent | a25f0944ba9b1d8a6813fd6f1a86f1bd59ac25a6 (diff) | |
| download | linux-b0921d5c9ed6ffa8a4d6afc5ee5f136b87445f14.tar.bz2 | |
mmc: sdhci-of-esdhc: fixup PRESENT_STATE read
Since commit 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy
cards in __mmc_switch()") the ESDHC driver is broken:
mmc0: Card stuck in programming state! __mmc_switch
mmc0: error -110 whilst initialising MMC card
Since this commit __mmc_switch() uses ->card_busy(), which is
sdhci_card_busy() for the esdhc driver. sdhci_card_busy() uses the
PRESENT_STATE register, specifically the DAT0 signal level bit. But the
ESDHC uses a non-conformant PRESENT_STATE register, thus a read fixup is
required to make the driver work again.
Signed-off-by: Michael Walle <michael@walle.cc>
Fixes: 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()")
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-esdhc.c | 14 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.h | 1 |
2 files changed, 15 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index fb71c866eacc..1bb11e4a9fe5 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -66,6 +66,20 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, return ret; } } + /* + * The DAT[3:0] line signal levels and the CMD line signal level are + * not compatible with standard SDHC register. The line signal levels + * DAT[7:0] are at bits 31:24 and the command line signal level is at + * bit 23. All other bits are the same as in the standard SDHC + * register. + */ + if (spec_reg == SDHCI_PRESENT_STATE) { + ret = value & 0x000fffff; + ret |= (value >> 4) & SDHCI_DATA_LVL_MASK; + ret |= (value << 1) & SDHCI_CMD_LVL; + return ret; + } + ret = value; return ret; } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 766df17fb7eb..2570455b219a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -73,6 +73,7 @@ #define SDHCI_DATA_LVL_MASK 0x00F00000 #define SDHCI_DATA_LVL_SHIFT 20 #define SDHCI_DATA_0_LVL_MASK 0x00100000 +#define SDHCI_CMD_LVL 0x01000000 #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 |