diff options
| author | Manuel Lauss <manuel.lauss@gmail.com> | 2014-07-23 16:36:56 +0200 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2014-07-30 14:11:42 +0200 |
| commit | b6507596dfd6e7540c0939bc361cce8059432b71 (patch) | |
| tree | 840f4fff6ddce34dadad2d38e860a58a26d7540d /drivers/mmc | |
| parent | ecc2ea3bd887188a1cc7702b1b52633ed91eb941 (diff) | |
| download | linux-b6507596dfd6e7540c0939bc361cce8059432b71.tar.bz2 | |
MIPS: Alchemy: au1xmmc: use clk framework
Use the clock framework to get the peripheral clock rate to
correctly set the MMC/SD bus clock divider.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7475/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/au1xmmc.c | 31 |
1 files changed, 21 insertions, 10 deletions
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 2988e9df85e3..9c9f6af29251 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -32,6 +32,7 @@ * (the low to high transition will not occur). */ +#include <linux/clk.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -118,6 +119,7 @@ struct au1xmmc_host { struct au1xmmc_platform_data *platdata; struct platform_device *pdev; struct resource *ioarea; + struct clk *clk; }; /* Status flags used by the host structure */ @@ -597,17 +599,10 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate) { - unsigned int pbus = get_au1x00_speed(); - unsigned int divisor; + unsigned int pbus = clk_get_rate(host->clk); + unsigned int divisor = ((pbus / rate) / 2) - 1; u32 config; - /* From databook: - * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1 - */ - pbus /= ((alchemy_rdsys(AU1000_SYS_POWERCTRL) & 0x3) + 2); - pbus /= 2; - divisor = ((pbus / rate) / 2) - 1; - config = __raw_readl(HOST_CONFIG(host)); config &= ~(SD_CONFIG_DIV); @@ -1030,6 +1025,16 @@ static int au1xmmc_probe(struct platform_device *pdev) goto out3; } + host->clk = clk_get(&pdev->dev, ALCHEMY_PERIPH_CLK); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "cannot find clock\n"); + goto out_irq; + } + if (clk_prepare_enable(host->clk)) { + dev_err(&pdev->dev, "cannot enable clock\n"); + goto out_clk; + } + host->status = HOST_S_IDLE; /* board-specific carddetect setup, if any */ @@ -1106,7 +1111,10 @@ out5: if (host->platdata && host->platdata->cd_setup && !(mmc->caps & MMC_CAP_NEEDS_POLL)) host->platdata->cd_setup(mmc, 0); - +out_clk: + clk_disable_unprepare(host->clk); + clk_put(host->clk); +out_irq: free_irq(host->irq, host); out3: iounmap((void *)host->iobase); @@ -1148,6 +1156,9 @@ static int au1xmmc_remove(struct platform_device *pdev) au1xmmc_set_power(host, 0); + clk_disable_unprepare(host->clk); + clk_put(host->clk); + free_irq(host->irq, host); iounmap((void *)host->iobase); release_resource(host->ioarea); |