summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/imxmmc.h
diff options
context:
space:
mode:
authorPavel Pisa <ppisa@pikron.com>2006-04-02 19:27:07 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-04-02 19:27:07 +0100
commit56ca904053ab14ba4067a72b69a5edf246771209 (patch)
tree23dc10e74bb4ce3d2a2ce5a9d8da1c5f5feda94d /drivers/mmc/imxmmc.h
parent65dbf34393f7b3d20e993d9651a825df0fa5376b (diff)
downloadlinux-56ca904053ab14ba4067a72b69a5edf246771209.tar.bz2
[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1
Patch from Pavel Pisa This patch adds support of i.MX/MX1 SD/MMC controller. It has been significantly redesigned from the original Sascha Hauer's version to support scatter-gather DMA, to conform to latest Pierre Ossman's and Russell King's MMC-SD Linux 2.6.x infrastructure. The handling of all events has been moved to the softirq context and is designed with no busy-looping in mind. Unfortunately some controller bugs has to be overcome by limited looping about 2-20 usec but these are observed only for initial card recognition phase. There are still some missing/missed IRQs problems under heavy load. Help of somebody with access to the full SDHC design information is probably necessary. Regenerated against 2.6.16-git-060402 to solve clash with other patches. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/mmc/imxmmc.h')
-rw-r--r--drivers/mmc/imxmmc.h67
1 files changed, 67 insertions, 0 deletions
diff --git a/drivers/mmc/imxmmc.h b/drivers/mmc/imxmmc.h
new file mode 100644
index 000000000000..e5339e334dbb
--- /dev/null
+++ b/drivers/mmc/imxmmc.h
@@ -0,0 +1,67 @@
+
+# define __REG16(x) (*((volatile u16 *)IO_ADDRESS(x)))
+
+#define MMC_STR_STP_CLK __REG16(IMX_MMC_BASE + 0x00)
+#define MMC_STATUS __REG16(IMX_MMC_BASE + 0x04)
+#define MMC_CLK_RATE __REG16(IMX_MMC_BASE + 0x08)
+#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C)
+#define MMC_RES_TO __REG16(IMX_MMC_BASE + 0x10)
+#define MMC_READ_TO __REG16(IMX_MMC_BASE + 0x14)
+#define MMC_BLK_LEN __REG16(IMX_MMC_BASE + 0x18)
+#define MMC_NOB __REG16(IMX_MMC_BASE + 0x1C)
+#define MMC_REV_NO __REG16(IMX_MMC_BASE + 0x20)
+#define MMC_INT_MASK __REG16(IMX_MMC_BASE + 0x24)
+#define MMC_CMD __REG16(IMX_MMC_BASE + 0x28)
+#define MMC_ARGH __REG16(IMX_MMC_BASE + 0x2C)
+#define MMC_ARGL __REG16(IMX_MMC_BASE + 0x30)
+#define MMC_RES_FIFO __REG16(IMX_MMC_BASE + 0x34)
+#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38)
+#define MMC_BUFFER_ACCESS_OFS 0x38
+
+
+#define STR_STP_CLK_ENDIAN (1<<5)
+#define STR_STP_CLK_RESET (1<<3)
+#define STR_STP_CLK_ENABLE (1<<2)
+#define STR_STP_CLK_START_CLK (1<<1)
+#define STR_STP_CLK_STOP_CLK (1<<0)
+#define STATUS_CARD_PRESENCE (1<<15)
+#define STATUS_SDIO_INT_ACTIVE (1<<14)
+#define STATUS_END_CMD_RESP (1<<13)
+#define STATUS_WRITE_OP_DONE (1<<12)
+#define STATUS_DATA_TRANS_DONE (1<<11)
+#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10)
+#define STATUS_CARD_BUS_CLK_RUN (1<<8)
+#define STATUS_APPL_BUFF_FF (1<<7)
+#define STATUS_APPL_BUFF_FE (1<<6)
+#define STATUS_RESP_CRC_ERR (1<<5)
+#define STATUS_CRC_READ_ERR (1<<3)
+#define STATUS_CRC_WRITE_ERR (1<<2)
+#define STATUS_TIME_OUT_RESP (1<<1)
+#define STATUS_TIME_OUT_READ (1<<0)
+#define STATUS_ERR_MASK 0x2f
+#define CLK_RATE_PRESCALER(x) ((x) & 0x7)
+#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3)
+#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12)
+#define CMD_DAT_CONT_STOP_READWAIT (1<<11)
+#define CMD_DAT_CONT_START_READWAIT (1<<10)
+#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8)
+#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8)
+#define CMD_DAT_CONT_INIT (1<<7)
+#define CMD_DAT_CONT_BUSY (1<<6)
+#define CMD_DAT_CONT_STREAM_BLOCK (1<<5)
+#define CMD_DAT_CONT_WRITE (1<<4)
+#define CMD_DAT_CONT_DATA_ENABLE (1<<3)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)
+#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)
+#define INT_MASK_AUTO_CARD_DETECT (1<<6)
+#define INT_MASK_DAT0_EN (1<<5)
+#define INT_MASK_SDIO (1<<4)
+#define INT_MASK_BUF_READY (1<<3)
+#define INT_MASK_END_CMD_RES (1<<2)
+#define INT_MASK_WRITE_OP_DONE (1<<1)
+#define INT_MASK_DATA_TRAN (1<<0)
+#define INT_ALL (0x7f)