Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

1 files changed, 5 insertions, 39 deletions

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 57e254aac48d..7db8c7a8d38d 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
@@ -27,7 +28,6 @@
 
 #include <linux/bitops.h>
 #include <linux/gpio.h>
-#include <asm/mach-jz4740/gpio.h>
 #include <asm/cacheflush.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
@@ -901,15 +901,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
 	.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
 };
 
-static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = {
-	JZ_GPIO_BULK_PIN(MSC_CMD),
-	JZ_GPIO_BULK_PIN(MSC_CLK),
-	JZ_GPIO_BULK_PIN(MSC_DATA0),
-	JZ_GPIO_BULK_PIN(MSC_DATA1),
-	JZ_GPIO_BULK_PIN(MSC_DATA2),
-	JZ_GPIO_BULK_PIN(MSC_DATA3),
-};
-
 static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
 	const char *name, bool output, int value)
 {
@@ -973,15 +964,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev)
 		gpio_free(pdata->gpio_power);
 }
 
-static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host)
-{
-	size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins);
-	if (host->pdata && host->pdata->data_1bit)
-		num_pins -= 3;
-
-	return num_pins;
-}
-
 static int jz4740_mmc_probe(struct platform_device* pdev)
 {
 	int ret;
@@ -1022,15 +1004,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 		goto err_free_host;
 	}
 
-	ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret);
-		goto err_free_host;
-	}
-
 	ret = jz4740_mmc_request_gpios(mmc, pdev);
 	if (ret)
-		goto err_gpio_bulk_free;
+		goto err_release_dma;
 
 	mmc->ops = &jz4740_mmc_ops;
 	mmc->f_min = JZ_MMC_CLK_RATE / 128;
@@ -1086,10 +1062,9 @@ err_free_irq:
 	free_irq(host->irq, host);
 err_free_gpios:
 	jz4740_mmc_free_gpios(pdev);
-err_gpio_bulk_free:
+err_release_dma:
 	if (host->use_dma)
 		jz4740_mmc_release_dma_channels(host);
-	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
 err_free_host:
 	mmc_free_host(mmc);
 
@@ -1109,7 +1084,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
 	free_irq(host->irq, host);
 
 	jz4740_mmc_free_gpios(pdev);
-	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
 
 	if (host->use_dma)
 		jz4740_mmc_release_dma_channels(host);
@@ -1123,20 +1097,12 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
 
 static int jz4740_mmc_suspend(struct device *dev)
 {
-	struct jz4740_mmc_host *host = dev_get_drvdata(dev);
-
-	jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-
-	return 0;
+	return pinctrl_pm_select_sleep_state(dev);
 }
 
 static int jz4740_mmc_resume(struct device *dev)
 {
-	struct jz4740_mmc_host *host = dev_get_drvdata(dev);
-
-	jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-
-	return 0;
+	return pinctrl_pm_select_default_state(dev);
 }
 
 static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend,