diff options
author | Yangbo Lu <yangbo.lu@nxp.com> | 2018-11-23 11:15:34 +0800 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-12-17 08:26:24 +0100 |
commit | 54e08d9a95ca54a192a9aef76742a4f7e81f6780 (patch) | |
tree | 6fe5624e8376f7d9f609b95be06a021ed1949c98 /drivers/mmc/host | |
parent | cc14eec0889bb06abab3d6ea1e0e0676521542c8 (diff) | |
download | linux-54e08d9a95ca54a192a9aef76742a4f7e81f6780.tar.bz2 |
mmc: sdhci-of-esdhc: add hs400 mode support
1. Perform the Tuning Process at the HS400 target operating frequency.
Latched the clock division value.
2. if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3. Switch to High Speed mode and then set the card clock frequency to
a value not greater than 52Mhz
4. Clear TBCTL[TB_EN],tuning block enable bit.
5. Change to 8 bit DDR Mode
6. Switch the card to HS400 mode.
7. Set TBCTL[TB_EN], tuning block enable bit.
8. Clear SYSCTL[SDCLKEN]
9. Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode]
and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r-- | drivers/mmc/host/sdhci-esdhc.h | 20 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-of-esdhc.c | 78 |
2 files changed, 88 insertions, 10 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index 3f16d9c90ba2..721a635b10e7 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -59,9 +59,29 @@ /* Tuning Block Control Register */ #define ESDHC_TBCTL 0x120 +#define ESDHC_HS400_WNDW_ADJUST 0x00000040 +#define ESDHC_HS400_MODE 0x00000010 #define ESDHC_TB_EN 0x00000004 #define ESDHC_TBPTR 0x128 +/* SD Clock Control Register */ +#define ESDHC_SDCLKCTL 0x144 +#define ESDHC_LPBK_CLK_SEL 0x80000000 +#define ESDHC_CMD_CLK_CTL 0x00008000 + +/* SD Timing Control Register */ +#define ESDHC_SDTIMNGCTL 0x148 +#define ESDHC_FLW_CTL_BG 0x00008000 + +/* DLL Config 0 Register */ +#define ESDHC_DLLCFG0 0x160 +#define ESDHC_DLL_ENABLE 0x80000000 +#define ESDHC_DLL_FREQ_SEL 0x08000000 + +/* DLL Status 0 Register */ +#define ESDHC_DLLSTAT0 0x170 +#define ESDHC_DLL_STS_SLV_LOCK 0x08000000 + /* Control Register for DMA transfer */ #define ESDHC_DMA_SYSCTL 0x40c #define ESDHC_PERIPHERAL_CLK_SEL 0x00080000 diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 86fc9f022002..fb4fe96821ce 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -592,6 +592,26 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) | (pre_div << ESDHC_PREDIV_SHIFT)); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 && + clock == MMC_HS200_MAX_DTR) { + temp = sdhci_readl(host, ESDHC_TBCTL); + sdhci_writel(host, temp | ESDHC_HS400_MODE, ESDHC_TBCTL); + temp = sdhci_readl(host, ESDHC_SDCLKCTL); + sdhci_writel(host, temp | ESDHC_CMD_CLK_CTL, ESDHC_SDCLKCTL); + esdhc_clock_enable(host, true); + + temp = sdhci_readl(host, ESDHC_DLLCFG0); + temp |= ESDHC_DLL_ENABLE | ESDHC_DLL_FREQ_SEL; + sdhci_writel(host, temp, ESDHC_DLLCFG0); + temp = sdhci_readl(host, ESDHC_TBCTL); + sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL); + + esdhc_clock_enable(host, false); + temp = sdhci_readl(host, ESDHC_DMA_SYSCTL); + temp |= ESDHC_FLUSH_ASYNC_FIFO; + sdhci_writel(host, temp, ESDHC_DMA_SYSCTL); + } + /* Wait max 20 ms */ timeout = ktime_add_ms(ktime_get(), 20); while (!(sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)) { @@ -603,6 +623,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) udelay(10); } + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp |= ESDHC_CLOCK_SDCLKEN; sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); } @@ -728,25 +749,46 @@ static struct soc_device_attribute soc_fixup_tuning[] = { { }, }; -static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) +static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) { - struct sdhci_host *host = mmc_priv(mmc); - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); u32 val; - /* Use tuning block for tuning procedure */ esdhc_clock_enable(host, false); + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); val |= ESDHC_FLUSH_ASYNC_FIFO; sdhci_writel(host, val, ESDHC_DMA_SYSCTL); val = sdhci_readl(host, ESDHC_TBCTL); - val |= ESDHC_TB_EN; + if (enable) + val |= ESDHC_TB_EN; + else + val &= ~ESDHC_TB_EN; sdhci_writel(host, val, ESDHC_TBCTL); + esdhc_clock_enable(host, true); +} + +static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + bool hs400_tuning; + u32 val; + int ret; + + esdhc_tuning_block_enable(host, true); + + hs400_tuning = host->flags & SDHCI_HS400_TUNING; + ret = sdhci_execute_tuning(mmc, opcode); + + if (hs400_tuning) { + val = sdhci_readl(host, ESDHC_SDTIMNGCTL); + val |= ESDHC_FLW_CTL_BG; + sdhci_writel(host, val, ESDHC_SDTIMNGCTL); + } - sdhci_execute_tuning(mmc, opcode); if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) { /* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and @@ -765,7 +807,16 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) sdhci_writel(host, val, ESDHC_TBCTL); sdhci_execute_tuning(mmc, opcode); } - return 0; + return ret; +} + +static void esdhc_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + if (timing == MMC_TIMING_MMC_HS400) + esdhc_tuning_block_enable(host, true); + else + sdhci_set_uhs_signaling(host, timing); } #ifdef CONFIG_PM_SLEEP @@ -814,7 +865,7 @@ static const struct sdhci_ops sdhci_esdhc_be_ops = { .adma_workaround = esdhc_of_adma_workaround, .set_bus_width = esdhc_pltfm_set_bus_width, .reset = esdhc_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_uhs_signaling = esdhc_set_uhs_signaling, }; static const struct sdhci_ops sdhci_esdhc_le_ops = { @@ -831,7 +882,7 @@ static const struct sdhci_ops sdhci_esdhc_le_ops = { .adma_workaround = esdhc_of_adma_workaround, .set_bus_width = esdhc_pltfm_set_bus_width, .reset = esdhc_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_uhs_signaling = esdhc_set_uhs_signaling, }; static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = { @@ -909,6 +960,12 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) } } +static int esdhc_hs400_prepare_ddr(struct mmc_host *mmc) +{ + esdhc_tuning_block_enable(mmc_priv(mmc), false); + return 0; +} + static int sdhci_esdhc_probe(struct platform_device *pdev) { struct sdhci_host *host; @@ -932,6 +989,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) host->mmc_host_ops.start_signal_voltage_switch = esdhc_signal_voltage_switch; host->mmc_host_ops.execute_tuning = esdhc_execute_tuning; + host->mmc_host_ops.hs400_prepare_ddr = esdhc_hs400_prepare_ddr; host->tuning_delay = 1; esdhc_init(pdev, host); |