diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-05-28 14:04:03 -0700 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2009-05-28 14:04:03 -0700 |
| commit | b583f26d510ee1aef7348f38f1d959212f66b5e5 (patch) | |
| tree | 23b79b4078535b91ac9d4471916fec08e68fbe18 /drivers/mmc/host | |
| parent | 4a899d5e93fd974952492cd4a09e98b209d1ad58 (diff) | |
| download | linux-b583f26d510ee1aef7348f38f1d959212f66b5e5.tar.bz2 | |
ARM: OMAP3: mmc-twl4030 uses regulator framework
Decouple the HSMMC glue from the twl4030 as the only
regulator provider, using the regulator framework instead.
This makes the glue's "mmc-twl4030" name become a complete
misnomer ... this code could probably all migrate into the
HSMMC driver now.
Tested on 3430SDP (SD and low-voltage MMC) and Beagle (SD),
plus some other boards (including Overo) after they were
converted to set up MMC regulators properly.
Eventually all boards should just associate a regulator with
each MMC controller they use. In some cases (Overo MMC2 and
Pandora MMC3, at least) that would be a fixed-voltage regulator
with no real software control. As a temporary hack (pending
regulator-next updates to make the "fixed.c" regulator become
usable) there's a new ocr_mask field for those boards.
Patch updated with a fix for disabling vcc_aux by
Adrian Hunter <adrian.hunter@nokia.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index e62a22a7f00c..2f19c635bc6e 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev) mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; - mmc->ocr_avail = mmc_slot(host).ocr_mask; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; if (pdata->slots[host->slot_id].wires >= 8) @@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev) goto err_irq; } + /* initialize power supplies, gpios, etc */ if (pdata->init != NULL) { if (pdata->init(&pdev->dev) != 0) { - dev_dbg(mmc_dev(host->mmc), - "Unable to configure MMC IRQs\n"); + dev_dbg(mmc_dev(host->mmc), "late init error\n"); goto err_irq_cd_init; } } + mmc->ocr_avail = mmc_slot(host).ocr_mask; /* Request IRQ for card detect */ if ((mmc_slot(host).card_detect_irq)) { |