mmc: replace printk with appropriate display macro

All the files using printk function for displaying kernel messages
in the mmc driver have been replaced with corresponding macro.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 12 insertions, 12 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 7dde373d1439..4e869d371a03 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -101,7 +101,7 @@ static int mmc_decode_cid(struct mmc_card *card)
 		break;
 
 	default:
-		printk(KERN_ERR "%s: card has unknown MMCA version %d\n",
+		pr_err("%s: card has unknown MMCA version %d\n",
 			mmc_hostname(card->host), card->csd.mmca_vsn);
 		return -EINVAL;
 	}
@@ -135,7 +135,7 @@ static int mmc_decode_csd(struct mmc_card *card)
 	 */
 	csd->structure = UNSTUFF_BITS(resp, 126, 2);
 	if (csd->structure == 0) {
-		printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
+		pr_err("%s: unrecognised CSD structure version %d\n",
 			mmc_hostname(card->host), csd->structure);
 		return -EINVAL;
 	}
@@ -195,7 +195,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
 	 */
 	ext_csd = kmalloc(512, GFP_KERNEL);
 	if (!ext_csd) {
-		printk(KERN_ERR "%s: could not allocate a buffer to "
+		pr_err("%s: could not allocate a buffer to "
 			"receive the ext_csd.\n", mmc_hostname(card->host));
 		return -ENOMEM;
 	}
@@ -217,12 +217,12 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
 		 * stored in their CSD.
 		 */
 		if (card->csd.capacity == (4096 * 512)) {
-			printk(KERN_ERR "%s: unable to read EXT_CSD "
+			pr_err("%s: unable to read EXT_CSD "
 				"on a possible high capacity card. "
 				"Card will be ignored.\n",
 				mmc_hostname(card->host));
 		} else {
-			printk(KERN_WARNING "%s: unable to read "
+			pr_warning("%s: unable to read "
 				"EXT_CSD, performance might "
 				"suffer.\n",
 				mmc_hostname(card->host));
@@ -252,7 +252,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
 	if (card->csd.structure == 3) {
 		if (card->ext_csd.raw_ext_csd_structure > 2) {
-			printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
+			pr_err("%s: unrecognised EXT_CSD structure "
 				"version %d\n", mmc_hostname(card->host),
 					card->ext_csd.raw_ext_csd_structure);
 			err = -EINVAL;
@@ -262,7 +262,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 
 	card->ext_csd.rev = ext_csd[EXT_CSD_REV];
 	if (card->ext_csd.rev > 6) {
-		printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n",
+		pr_err("%s: unrecognised EXT_CSD revision %d\n",
 			mmc_hostname(card->host), card->ext_csd.rev);
 		err = -EINVAL;
 		goto out;
@@ -308,7 +308,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		break;
 	default:
 		/* MMC v4 spec says this cannot happen */
-		printk(KERN_WARNING "%s: card is mmc v4 but doesn't "
+		pr_warning("%s: card is mmc v4 but doesn't "
 			"support any high-speed modes.\n",
 			mmc_hostname(card->host));
 	}
@@ -857,7 +857,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			goto free_card;
 
 		if (err) {
-			printk(KERN_WARNING "%s: switch to highspeed failed\n",
+			pr_warning("%s: switch to highspeed failed\n",
 			       mmc_hostname(card->host));
 			err = 0;
 		} else {
@@ -966,7 +966,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 					 card->ext_csd.generic_cmd6_time);
 		}
 		if (err) {
-			printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
+			pr_warning("%s: switch to bus width %d ddr %d "
 				"failed\n", mmc_hostname(card->host),
 				1 << bus_width, ddr);
 			goto free_card;
@@ -1204,7 +1204,7 @@ int mmc_attach_mmc(struct mmc_host *host)
 	 * support.
 	 */
 	if (ocr & 0x7F) {
-		printk(KERN_WARNING "%s: card claims to support voltages "
+		pr_warning("%s: card claims to support voltages "
 		       "below the defined range. These will be ignored.\n",
 		       mmc_hostname(host));
 		ocr &= ~0x7F;
@@ -1243,7 +1243,7 @@ remove_card:
 err:
 	mmc_detach_bus(host);
 
-	printk(KERN_ERR "%s: error %d whilst initialising MMC card\n",
+	pr_err("%s: error %d whilst initialising MMC card\n",
 		mmc_hostname(host), err);
 
 	return err;