diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-21 17:40:46 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-21 17:40:46 -0700 |
commit | 99cc7ad46b62ef20b0478147677bebd1157bd9cf (patch) | |
tree | f07f33826e6947108234707030867d969230611d /drivers/misc | |
parent | 0214f46b3a0383d6e33c297e7706216b6a550e4b (diff) | |
parent | 19358d4488db7e6a04e940730cc75909d7d1e0d8 (diff) | |
download | linux-99cc7ad46b62ef20b0478147677bebd1157bd9cf.tar.bz2 |
Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- the core has now a lockless variant of i2c_smbus_xfer. Some open
coded versions of this got removed in drivers. This also enables
proper SCCB support in regmap.
- locking got a more precise naming. i2c_{un}lock_adapter() had to go,
and we know use i2c_lock_bus() consistently with flags like
I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.
- the gpio fault injector got a new delicate testcase
- the bus recovery procedure got fixed to handle the new testcase
correctly
- a new quirk flag for controllers not able to handle zero length
messages together with driver updates to use it
- new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
family S900
- and a good set of driver improvements and bugfixes
* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
i2c: rcar: implement STOP and REP_START according to docs
i2c: rcar: refactor private flags
i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
dt-bindings: i2c: rcar: Add r8a774a1 support
dt-bindings: i2c: sh_mobile: Add r8a774a1 support
i2c: imx: Simplify stopped state tracking
i2c: imx: Fix race condition in dma read
i2c: pasemi: remove hardcoded bus numbers on smbus
i2c: designware: Add SPDX license tag
i2c: designware: Convert to use struct i2c_timings
i2c: core: Parse SDA hold time from firmware
i2c: designware-pcidrv: Mark expected switch fall-through
i2c: amd8111: Mark expected switch fall-through
i2c: sh_mobile: use core to detect 'no zero length read' quirk
i2c: xlr: use core to detect 'no zero length' quirk
i2c: rcar: use core to detect 'no zero length' quirk
i2c: stu300: use core to detect 'no zero length' quirk
i2c: pmcmsp: use core to detect 'no zero length' quirk
i2c: mxs: use core to detect 'no zero length' quirk
...
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/eeprom/at24.c | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f5cc517d1131..7e50e1d6f58c 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -478,6 +478,23 @@ static void at24_properties_to_pdata(struct device *dev, if (device_property_present(dev, "no-read-rollover")) chip->flags |= AT24_FLAG_NO_RDROL; + err = device_property_read_u32(dev, "address-width", &val); + if (!err) { + switch (val) { + case 8: + if (chip->flags & AT24_FLAG_ADDR16) + dev_warn(dev, "Override address width to be 8, while default is 16\n"); + chip->flags &= ~AT24_FLAG_ADDR16; + break; + case 16: + chip->flags |= AT24_FLAG_ADDR16; + break; + default: + dev_warn(dev, "Bad \"address-width\" property: %u\n", + val); + } + } + err = device_property_read_u32(dev, "size", &val); if (!err) chip->byte_len = val; |