diff options
| author | Lukas Wunner <lukas@wunner.de> | 2017-09-05 11:44:00 +0200 |
|---|---|---|
| committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2017-09-13 17:49:57 +0100 |
| commit | 49b3f87496a7c646da3f900fd502f68a687457ad (patch) | |
| tree | efeb39b89bd23a89cbf0cc323d6d4f11be6429a9 /drivers/misc/Kconfig | |
| parent | 9cad3b9854e3a0961557059e149876dd05615170 (diff) | |
| download | linux-49b3f87496a7c646da3f900fd502f68a687457ad.tar.bz2 | |
drivers: misc: ti_dac7512: Remove duplicate driver
The Texas Instruments DAC7512 has the exact same pinout, programming
interface and power-down modes as the Texas Instruments DAC121S101 and
Analog Devices AD5320, which are already supported by the IIO driver
ad5446.c. Remove the duplicate misc driver.
This requires user space to migrate to the standardized IIO sysfs ABI.
(In other words, it needs to change a filename.)
The IIO driver supports the chip's features more fully, e.g. the ability
to power down the output or choose one of the available powerdown modes.
There is an oddity with the misc driver in that it initializes the SPI
slave to SPI_MODE_0, in contradiction to the datasheet which specifies
that data is latched in on the falling edge, implying that SPI_MODE_1
or SPI_MODE_2 must be used. Another oddity is that Kconfig and the
MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it
actually has 12-bit.
Datasheets:
http://www.ti.com/lit/ds/symlink/dac7512.pdf
http://www.ti.com/lit/ds/symlink/dac121s101.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/misc/Kconfig')
| -rw-r--r-- | drivers/misc/Kconfig | 10 |
1 files changed, 0 insertions, 10 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 8136dc7e863d..f1a5c2357b14 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -393,16 +393,6 @@ config SPEAR13XX_PCIE_GADGET entry will be created for that controller. User can use these sysfs node to configure PCIe EP as per his requirements. -config TI_DAC7512 - tristate "Texas Instruments DAC7512" - depends on SPI && SYSFS - help - If you say yes here you get support for the Texas Instruments - DAC7512 16-bit digital-to-analog converter. - - This driver can also be built as a module. If so, the module - will be called ti_dac7512. - config VMWARE_BALLOON tristate "VMware Balloon Driver" depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST |