summaryrefslogtreecommitdiffstats
path: root/drivers/misc/Kconfig
diff options
context:
space:
mode:
authorLukas Wunner <lukas@wunner.de>2017-09-05 11:44:00 +0200
committerJonathan Cameron <Jonathan.Cameron@huawei.com>2017-09-13 17:49:57 +0100
commit49b3f87496a7c646da3f900fd502f68a687457ad (patch)
treeefeb39b89bd23a89cbf0cc323d6d4f11be6429a9 /drivers/misc/Kconfig
parent9cad3b9854e3a0961557059e149876dd05615170 (diff)
downloadlinux-49b3f87496a7c646da3f900fd502f68a687457ad.tar.bz2
drivers: misc: ti_dac7512: Remove duplicate driver
The Texas Instruments DAC7512 has the exact same pinout, programming interface and power-down modes as the Texas Instruments DAC121S101 and Analog Devices AD5320, which are already supported by the IIO driver ad5446.c. Remove the duplicate misc driver. This requires user space to migrate to the standardized IIO sysfs ABI. (In other words, it needs to change a filename.) The IIO driver supports the chip's features more fully, e.g. the ability to power down the output or choose one of the available powerdown modes. There is an oddity with the misc driver in that it initializes the SPI slave to SPI_MODE_0, in contradiction to the datasheet which specifies that data is latched in on the falling edge, implying that SPI_MODE_1 or SPI_MODE_2 must be used. Another oddity is that Kconfig and the MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it actually has 12-bit. Datasheets: http://www.ti.com/lit/ds/symlink/dac7512.pdf http://www.ti.com/lit/ds/symlink/dac121s101.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdf Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Daniel Mack <daniel@zonque.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/misc/Kconfig')
-rw-r--r--drivers/misc/Kconfig10
1 files changed, 0 insertions, 10 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 8136dc7e863d..f1a5c2357b14 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -393,16 +393,6 @@ config SPEAR13XX_PCIE_GADGET
entry will be created for that controller. User can use these
sysfs node to configure PCIe EP as per his requirements.
-config TI_DAC7512
- tristate "Texas Instruments DAC7512"
- depends on SPI && SYSFS
- help
- If you say yes here you get support for the Texas Instruments
- DAC7512 16-bit digital-to-analog converter.
-
- This driver can also be built as a module. If so, the module
- will be called ti_dac7512.
-
config VMWARE_BALLOON
tristate "VMware Balloon Driver"
depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST