diff options
| author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2012-11-27 18:48:33 +0000 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2012-11-28 17:30:36 +0000 |
| commit | 73ee29460e5d0adbb46e4962df69ae2465746612 (patch) | |
| tree | 9afcdda72d606fb6f15f322a89c1c998f688a79c /drivers/mfd | |
| parent | 8a7f0c61c0c0dfdf5d5d878fe93ae20b4fd14ee2 (diff) | |
| download | linux-73ee29460e5d0adbb46e4962df69ae2465746612.tar.bz2 | |
regulator: arizona-ldo1: Support 1.8V mode
Some Arizona device support a 1.8V output mode. Enable this in the driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/wm5102-tables.c | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 01b9255ed631..b829a5710ddc 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -775,6 +775,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */ { 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */ { 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */ + { 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */ { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */ { 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */ { 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */ @@ -1564,6 +1565,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_RATE_ESTIMATOR_3: case ARIZONA_RATE_ESTIMATOR_4: case ARIZONA_RATE_ESTIMATOR_5: + case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1: case ARIZONA_FLL1_CONTROL_1: case ARIZONA_FLL1_CONTROL_2: case ARIZONA_FLL1_CONTROL_3: @@ -1596,6 +1598,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_GPIO_CLOCK: case ARIZONA_MIC_CHARGE_PUMP_1: case ARIZONA_LDO1_CONTROL_1: + case ARIZONA_LDO1_CONTROL_2: case ARIZONA_LDO2_CONTROL_1: case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: |