summaryrefslogtreecommitdiffstats
path: root/drivers/mfd
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@st.com>2011-11-17 11:02:20 +0530
committerSamuel Ortiz <sameo@linux.intel.com>2012-01-09 00:37:42 +0100
commit1a6e4b7415339e3b11a87cff0d701b8a2e55f062 (patch)
treefbd5151ac34bf908826f4bbf8b298404660a8de1 /drivers/mfd
parent71e58782d2e054798f91473f5452ffe65e2a5ff8 (diff)
downloadlinux-1a6e4b7415339e3b11a87cff0d701b8a2e55f062.tar.bz2
mfd: Separate out STMPE controller and interface specific code
Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig11
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/stmpe-i2c.c107
-rw-r--r--drivers/mfd/stmpe.c133
-rw-r--r--drivers/mfd/stmpe.h33
5 files changed, 195 insertions, 90 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 08a3e087bcea..7bc55819ab4a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -279,6 +279,17 @@ config MFD_STMPE
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
+menu "STMPE Interface Drivers"
+depends on MFD_STMPE
+
+config STMPE_I2C
+ bool "STMPE I2C Inteface"
+ depends on I2C
+ default y
+ help
+ This is used to enable I2C interface of STMPE
+endmenu
+
config MFD_TC3589X
bool "Support Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b2292eb75242..5eb90a70c1a5 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
+obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o
obj-$(CONFIG_MFD_TC3589X) += tc3589x.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
new file mode 100644
index 000000000000..0a4365902e36
--- /dev/null
+++ b/drivers/mfd/stmpe-i2c.c
@@ -0,0 +1,107 @@
+/*
+ * ST Microelectronics MFD: stmpe's i2c client specific driver
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ * Copyright (C) ST Microelectronics SA 2011
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "stmpe.h"
+
+static int i2c_reg_read(struct stmpe *stmpe, u8 reg)
+{
+ struct i2c_client *i2c = stmpe->client;
+
+ return i2c_smbus_read_byte_data(i2c, reg);
+}
+
+static int i2c_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+ struct i2c_client *i2c = stmpe->client;
+
+ return i2c_smbus_write_byte_data(i2c, reg, val);
+}
+
+static int i2c_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
+{
+ struct i2c_client *i2c = stmpe->client;
+
+ return i2c_smbus_read_i2c_block_data(i2c, reg, length, values);
+}
+
+static int i2c_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+ const u8 *values)
+{
+ struct i2c_client *i2c = stmpe->client;
+
+ return i2c_smbus_write_i2c_block_data(i2c, reg, length, values);
+}
+
+static struct stmpe_client_info i2c_ci = {
+ .read_byte = i2c_reg_read,
+ .write_byte = i2c_reg_write,
+ .read_block = i2c_block_read,
+ .write_block = i2c_block_write,
+};
+
+static int __devinit
+stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+ i2c_ci.data = (void *)id;
+ i2c_ci.irq = i2c->irq;
+ i2c_ci.client = i2c;
+ i2c_ci.dev = &i2c->dev;
+
+ return stmpe_probe(&i2c_ci, id->driver_data);
+}
+
+static int __devexit stmpe_i2c_remove(struct i2c_client *i2c)
+{
+ struct stmpe *stmpe = dev_get_drvdata(&i2c->dev);
+
+ return stmpe_remove(stmpe);
+}
+
+static const struct i2c_device_id stmpe_i2c_id[] = {
+ { "stmpe811", STMPE811 },
+ { "stmpe1601", STMPE1601 },
+ { "stmpe2401", STMPE2401 },
+ { "stmpe2403", STMPE2403 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, stmpe_id);
+
+static struct i2c_driver stmpe_i2c_driver = {
+ .driver.name = "stmpe-i2c",
+ .driver.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .driver.pm = &stmpe_dev_pm_ops,
+#endif
+ .probe = stmpe_i2c_probe,
+ .remove = __devexit_p(stmpe_i2c_remove),
+ .id_table = stmpe_i2c_id,
+};
+
+static int __init stmpe_init(void)
+{
+ return i2c_add_driver(&stmpe_i2c_driver);
+}
+subsys_initcall(stmpe_init);
+
+static void __exit stmpe_exit(void)
+{
+ i2c_del_driver(&stmpe_i2c_driver);
+}
+module_exit(stmpe_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPE MFD I2C Interface Driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 39efa629a19d..83bacde6a7cb 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1,4 +1,6 @@
/*
+ * ST Microelectronics MFD: stmpe's driver
+ *
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License, version 2
@@ -7,13 +9,11 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/pm.h>
#include <linux/slab.h>
-#include <linux/i2c.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/stmpe.h>
#include "stmpe.h"
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -30,10 +30,9 @@ static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
{
int ret;
- ret = i2c_smbus_read_byte_data(stmpe->i2c, reg);
+ ret = stmpe->ci->read_byte(stmpe, reg);
if (ret < 0)
- dev_err(stmpe->dev, "failed to read reg %#x: %d\n",
- reg, ret);
+ dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
@@ -46,10 +45,9 @@ static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
- ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val);
+ ret = stmpe->ci->write_byte(stmpe, reg, val);
if (ret < 0)
- dev_err(stmpe->dev, "failed to write reg %#x: %d\n",
- reg, ret);
+ dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
return ret;
}
@@ -73,10 +71,9 @@ static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
{
int ret;
- ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values);
+ ret = stmpe->ci->read_block(stmpe, reg, length, values);
if (ret < 0)
- dev_err(stmpe->dev, "failed to read regs %#x: %d\n",
- reg, ret);
+ dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
stmpe_dump_bytes("stmpe rd: ", values, length);
@@ -92,11 +89,9 @@ static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
stmpe_dump_bytes("stmpe wr: ", values, length);
- ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length,
- values);
+ ret = stmpe->ci->write_block(stmpe, reg, length, values);
if (ret < 0)
- dev_err(stmpe->dev, "failed to write regs %#x: %d\n",
- reg, ret);
+ dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
return ret;
}
@@ -874,34 +869,10 @@ static int __devinit stmpe_devices_init(struct stmpe *stmpe)
return ret;
}
-#ifdef CONFIG_PM
-static int stmpe_suspend(struct device *dev)
-{
- struct i2c_client *i2c = to_i2c_client(dev);
- struct stmpe *stmpe = i2c_get_clientdata(i2c);
-
- if (device_may_wakeup(&i2c->dev))
- enable_irq_wake(stmpe->irq);
-
- return 0;
-}
-
-static int stmpe_resume(struct device *dev)
+/* Called from client specific probe routines */
+int stmpe_probe(struct stmpe_client_info *ci, int partnum)
{
- struct i2c_client *i2c = to_i2c_client(dev);
- struct stmpe *stmpe = i2c_get_clientdata(i2c);
-
- if (device_may_wakeup(&i2c->dev))
- disable_irq_wake(stmpe->irq);
-
- return 0;
-}
-#endif
-
-static int __devinit stmpe_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
-{
- struct stmpe_platform_data *pdata = i2c->dev.platform_data;
+ struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
struct stmpe *stmpe;
int ret;
@@ -915,18 +886,19 @@ static int __devinit stmpe_probe(struct i2c_client *i2c,
mutex_init(&stmpe->irq_lock);
mutex_init(&stmpe->lock);
- stmpe->dev = &i2c->dev;
- stmpe->i2c = i2c;
-
+ stmpe->dev = ci->dev;
+ stmpe->client = ci->client;
stmpe->pdata = pdata;
stmpe->irq_base = pdata->irq_base;
-
- stmpe->partnum = id->driver_data;
- stmpe->variant = stmpe_variant_info[stmpe->partnum];
+ stmpe->ci = ci;
+ stmpe->partnum = partnum;
+ stmpe->variant = stmpe_variant_info[partnum];
stmpe->regs = stmpe->variant->regs;
stmpe->num_gpios = stmpe->variant->num_gpios;
+ dev_set_drvdata(stmpe->dev, stmpe);
- i2c_set_clientdata(i2c, stmpe);
+ if (ci->init)
+ ci->init(stmpe);
if (pdata->irq_over_gpio) {
ret = gpio_request_one(pdata->irq_gpio, GPIOF_DIR_IN, "stmpe");
@@ -938,7 +910,7 @@ static int __devinit stmpe_probe(struct i2c_client *i2c,
stmpe->irq = gpio_to_irq(pdata->irq_gpio);
} else {
- stmpe->irq = i2c->irq;
+ stmpe->irq = ci->irq;
}
ret = stmpe_chip_init(stmpe);
@@ -950,8 +922,7 @@ static int __devinit stmpe_probe(struct i2c_client *i2c,
goto free_gpio;
ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
- pdata->irq_trigger | IRQF_ONESHOT,
- "stmpe", stmpe);
+ pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe);
if (ret) {
dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
goto out_removeirq;
@@ -978,10 +949,8 @@ out_free:
return ret;
}
-static int __devexit stmpe_remove(struct i2c_client *client)
+int stmpe_remove(struct stmpe *stmpe)
{
- struct stmpe *stmpe = i2c_get_clientdata(client);
-
mfd_remove_devices(stmpe->dev);
free_irq(stmpe->irq, stmpe);
@@ -995,45 +964,29 @@ static int __devexit stmpe_remove(struct i2c_client *client)
return 0;
}
-static const struct i2c_device_id stmpe_id[] = {
- { "stmpe811", STMPE811 },
- { "stmpe1601", STMPE1601 },
- { "stmpe2401", STMPE2401 },
- { "stmpe2403", STMPE2403 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, stmpe_id);
-
#ifdef CONFIG_PM
-static const struct dev_pm_ops stmpe_dev_pm_ops = {
- .suspend = stmpe_suspend,
- .resume = stmpe_resume,
-};
-#endif
+static int stmpe_suspend(struct device *dev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(dev);
-static struct i2c_driver stmpe_driver = {
- .driver.name = "stmpe",
- .driver.owner = THIS_MODULE,
-#ifdef CONFIG_PM
- .driver.pm = &stmpe_dev_pm_ops,
-#endif
- .probe = stmpe_probe,
- .remove = __devexit_p(stmpe_remove),
- .id_table = stmpe_id,
-};
+ if (device_may_wakeup(dev))
+ enable_irq_wake(stmpe->irq);
-static int __init stmpe_init(void)
-{
- return i2c_add_driver(&stmpe_driver);
+ return 0;
}
-subsys_initcall(stmpe_init);
-static void __exit stmpe_exit(void)
+static int stmpe_resume(struct device *dev)
{
- i2c_del_driver(&stmpe_driver);
+ struct stmpe *stmpe = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(stmpe->irq);
+
+ return 0;
}
-module_exit(stmpe_exit);
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("STMPE MFD core driver");
-MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
+const struct dev_pm_ops stmpe_dev_pm_ops = {
+ .suspend = stmpe_suspend,
+ .resume = stmpe_resume,
+};
+#endif
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index e4ee38956583..18d89a68ce40 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -8,6 +8,14 @@
#ifndef __STMPE_H
#define __STMPE_H
+#include <linux/device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+
+extern const struct dev_pm_ops stmpe_dev_pm_ops;
+
#ifdef STMPE_DUMP_BYTES
static inline void stmpe_dump_bytes(const char *str, const void *buf,
size_t len)
@@ -67,6 +75,31 @@ struct stmpe_variant_info {
int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
};
+/**
+ * struct stmpe_client_info - i2c or spi specific routines/info
+ * @data: client specific data
+ * @read_byte: read single byte
+ * @write_byte: write single byte
+ * @read_block: read block or multiple bytes
+ * @write_block: write block or multiple bytes
+ * @init: client init routine, called during probe
+ */
+struct stmpe_client_info {
+ void *data;
+ int irq;
+ void *client;
+ struct device *dev;
+ int (*read_byte)(struct stmpe *stmpe, u8 reg);
+ int (*write_byte)(struct stmpe *stmpe, u8 reg, u8 val);
+ int (*read_block)(struct stmpe *stmpe, u8 reg, u8 len, u8 *values);
+ int (*write_block)(struct stmpe *stmpe, u8 reg, u8 len,
+ const u8 *values);
+ void (*init)(struct stmpe *stmpe);
+};
+
+int stmpe_probe(struct stmpe_client_info *ci, int partnum);
+int stmpe_remove(struct stmpe *stmpe);
+
#define STMPE_ICR_LSB_HIGH (1 << 2)
#define STMPE_ICR_LSB_EDGE (1 << 1)
#define STMPE_ICR_LSB_GIM (1 << 0)