Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull irq_domain support for all architectures from Grant Likely:
 "Generialize powerpc's irq_host as irq_domain

  This branch takes the PowerPC irq_host infrastructure (reverse mapping
  from Linux IRQ numbers to hardware irq numbering), generalizes it,
  renames it to irq_domain, and makes it available to all architectures.

  Originally the plan has been to create an all-new irq_domain
  implementation which addresses some of the powerpc shortcomings such
  as not handling 1:1 mappings well, but doing that proved to be far
  more difficult and invasive than generalizing the working code and
  refactoring it in-place.  So, this branch rips out the 'new'
  irq_domain and replaces it with the modified powerpc version (in a
  fully bisectable way of course).  It converts all users over to the
  new API and makes irq_domain selectable on any architecture.

  No architecture is forced to enable irq_domain, but the infrastructure
  is required for doing OpenFirmware style irq translations.  It will
  even work on SPARC even though SPARC has it's own mechanism for
  translating irqs at boot time.  MIPS, microblaze, embedded x86 and c6x
  are converted too.

  The resulting irq_domain code is probably still too verbose and can be
  optimized more, but that can be done incrementally and is a task for
  follow-on patches."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits)
  dt: fix twl4030 for non-dt compile on x86
  mfd: twl-core: Add IRQ_DOMAIN dependency
  devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc)
  irq_domain: Centralize definition of irq_dispose_mapping()
  irq_domain/mips: Allow irq_domain on MIPS
  irq_domain/x86: Convert x86 (embedded) to use common irq_domain
  ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c
  irq_domain/microblaze: Convert microblaze to use irq_domains
  irq_domain/powerpc: Replace custom xlate functions with library functions
  irq_domain/powerpc: constify irq_domain_ops
  irq_domain/c6x: Use library of xlate functions
  irq_domain/c6x: constify irq_domain structures
  irq_domain/c6x: Convert c6x to use generic irq_domain support.
  irq_domain: constify irq_domain_ops
  irq_domain: Create common xlate functions that device drivers can use
  irq_domain: Remove irq_domain_add_simple()
  irq_domain: Remove 'new' irq_domain in favour of the ppc one
  mfd: twl-core.c: Fix the number of interrupts managed by twl4030
  of/address: add empty static inlines for !CONFIG_OF
  irq_domain: Add support for base irq and hwirq in legacy mappings
  ...

2 files changed, 7 insertions, 16 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f147395bac9a..1489c3540f96 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -201,6 +201,7 @@ config MENELAUS
 config TWL4030_CORE
 	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 	depends on I2C=y && GENERIC_HARDIRQS
+	select IRQ_DOMAIN
 	help
 	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 	  This core driver provides register access and IRQ handling
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 8ce3959c6919..54727ef005d6 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -38,6 +38,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/irq.h>
 #include <linux/irqdomain.h>
 
 #include <linux/regulator/machine.h>
@@ -149,7 +150,7 @@
 
 #define TWL_MODULE_LAST TWL4030_MODULE_LAST
 
-#define TWL4030_NR_IRQS    8
+#define TWL4030_NR_IRQS    34 /* core:8, power:8, gpio: 18 */
 #define TWL6030_NR_IRQS    20
 
 /* Base Address defns for twl4030_map[] */
@@ -263,10 +264,6 @@ struct twl_client {
 
 static struct twl_client twl_modules[TWL_NUM_SLAVES];
 
-#ifdef CONFIG_IRQ_DOMAIN
-static struct irq_domain domain;
-#endif
-
 /* mapping the module id to slave id and base address */
 struct twl_mapping {
 	unsigned char sid;	/* Slave ID */
@@ -1227,14 +1224,8 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	pdata->irq_base = status;
 	pdata->irq_end = pdata->irq_base + nr_irqs;
-
-#ifdef CONFIG_IRQ_DOMAIN
-	domain.irq_base = pdata->irq_base;
-	domain.nr_irq = nr_irqs;
-	domain.of_node = of_node_get(node);
-	domain.ops = &irq_domain_simple_ops;
-	irq_domain_add(&domain);
-#endif
+	irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0,
+			      &irq_domain_simple_ops, NULL);
 
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
 		dev_dbg(&client->dev, "can't talk I2C?\n");
@@ -1315,11 +1306,10 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
 	}
 
-#ifdef CONFIG_OF_DEVICE
+	status = -ENODEV;
 	if (node)
 		status = of_platform_populate(node, NULL, NULL, &client->dev);
-	else
-#endif
+	if (status)
 		status = add_children(pdata, id->driver_data);
 
 fail: