summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/atmel-smc.c
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@free-electrons.com>2017-03-16 09:30:28 +0100
committerLee Jones <lee.jones@linaro.org>2017-04-27 09:25:05 +0100
commitfe9d7cb22ef3a26a74e49730c0efdbdae4b17d4b (patch)
tree9d45102f006477482862c93300e356305f30f83c /drivers/mfd/atmel-smc.c
parent119d53d44cb0da2e3140106a9e359fc53bd6d837 (diff)
downloadlinux-fe9d7cb22ef3a26a74e49730c0efdbdae4b17d4b.tar.bz2
mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
These new helpers + macro definitions are meant to replace the old ones which are unpractical to use. Note that the macros and function prefixes have been intentionally changed to ATMEL_[H]SMC_XX and atmel_[h]smc_ to reflect the fact that this IP is also embedded in avr32 SoCs (and not only in at91 ones). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/mfd/atmel-smc.c')
-rw-r--r--drivers/mfd/atmel-smc.c314
1 files changed, 314 insertions, 0 deletions
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
new file mode 100644
index 000000000000..954cf0f66a31
--- /dev/null
+++ b/drivers/mfd/atmel-smc.c
@@ -0,0 +1,314 @@
+/*
+ * Atmel SMC (Static Memory Controller) helper functions.
+ *
+ * Copyright (C) 2017 Atmel
+ * Copyright (C) 2017 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon/atmel-smc.h>
+
+/**
+ * atmel_smc_cs_conf_init - initialize a SMC CS conf
+ * @conf: the SMC CS conf to initialize
+ *
+ * Set all fields to 0 so that one can start defining a new config.
+ */
+void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf)
+{
+ memset(conf, 0, sizeof(*conf));
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init);
+
+/**
+ * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the
+ * format expected by the SMC engine
+ * @ncycles: number of MCK clk cycles
+ * @msbpos: position of the MSB part of the timing field
+ * @msbwidth: width of the MSB part of the timing field
+ * @msbfactor: factor applied to the MSB
+ * @encodedval: param used to store the encoding result
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic
+ * helper which called with different parameter depending on the encoding
+ * scheme.
+ *
+ * If the @ncycles value is too big to be encoded, -ERANGE is returned and
+ * the encodedval is contains the maximum val. Otherwise, 0 is returned.
+ */
+static int atmel_smc_cs_encode_ncycles(unsigned int ncycles,
+ unsigned int msbpos,
+ unsigned int msbwidth,
+ unsigned int msbfactor,
+ unsigned int *encodedval)
+{
+ unsigned int lsbmask = GENMASK(msbpos - 1, 0);
+ unsigned int msbmask = GENMASK(msbwidth - 1, 0);
+ unsigned int msb, lsb;
+ int ret = 0;
+
+ msb = ncycles / msbfactor;
+ lsb = ncycles % msbfactor;
+
+ if (lsb > lsbmask) {
+ lsb = 0;
+ msb++;
+ }
+
+ /*
+ * Let's just put the maximum we can if the requested setting does
+ * not fit in the register field.
+ * We still return -ERANGE in case the caller cares.
+ */
+ if (msb > msbmask) {
+ msb = msbmask;
+ lsb = lsbmask;
+ ret = -ERANGE;
+ }
+
+ *encodedval = (msb << msbpos) | lsb;
+
+ return ret;
+}
+
+/**
+ * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the Txx field in the TIMINGS register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Timings Register"), and then stores the result in the
+ * @conf->timings field at @shift position.
+ *
+ * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "HSMC Timings
+ * Register"):
+ *
+ * ncycles = (Txx[3] * 64) + Txx[2:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val);
+ conf->timings &= ~GENMASK(shift + 3, shift);
+ conf->timings |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing);
+
+/**
+ * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_SETUP field in the SETUP register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Setup Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
+ shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Setup
+ * Register"):
+ *
+ * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val);
+ conf->setup &= ~GENMASK(shift + 7, shift);
+ conf->setup |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup);
+
+/**
+ * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_PULSE field in the PULSE register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Pulse Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
+ shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Pulse
+ * Register"):
+ *
+ * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val);
+ conf->pulse &= ~GENMASK(shift + 7, shift);
+ conf->pulse |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse);
+
+/**
+ * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_CYCLE field in the CYCLE register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Pulse Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Cycle
+ * Register"):
+ *
+ * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val);
+ conf->cycle &= ~GENMASK(shift + 15, shift);
+ conf->cycle |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle);
+
+/**
+ * atmel_smc_cs_conf_apply - apply an SMC CS conf
+ * @regmap: the SMC regmap
+ * @cs: the CS id
+ * @conf the SMC CS conf to apply
+ *
+ * Applies an SMC CS configuration.
+ * Only valid on at91sam9/avr32 SoCs.
+ */
+void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf)
+{
+ regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup);
+ regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse);
+ regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle);
+ regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
+
+/**
+ * atmel_hsmc_cs_conf_apply - apply an SMC CS conf
+ * @regmap: the HSMC regmap
+ * @cs: the CS id
+ * @conf the SMC CS conf to apply
+ *
+ * Applies an SMC CS configuration.
+ * Only valid on post-sama5 SoCs.
+ */
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf)
+{
+ regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
+
+/**
+ * atmel_smc_cs_conf_get - retrieve the current SMC CS conf
+ * @regmap: the SMC regmap
+ * @cs: the CS id
+ * @conf: the SMC CS conf object to store the current conf
+ *
+ * Retrieve the SMC CS configuration.
+ * Only valid on at91sam9/avr32 SoCs.
+ */
+void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf)
+{
+ regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup);
+ regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
+
+/**
+ * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
+ * @regmap: the HSMC regmap
+ * @cs: the CS id
+ * @conf: the SMC CS conf object to store the current conf
+ *
+ * Retrieve the SMC CS configuration.
+ * Only valid on post-sama5 SoCs.
+ */
+void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf)
+{
+ regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);