Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 6 insertions, 14 deletions

diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index f1beb4971f87..dfdb0a2b6835 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -367,12 +367,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 	int i, j;
 	int ret = 0;
 
-	aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+	aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
+				GFP_KERNEL);
 	if (!aat2870) {
 		dev_err(&client->dev,
 			"Failed to allocate memory for aat2870\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	aat2870->dev = &client->dev;
@@ -400,12 +400,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 		aat2870->init(aat2870);
 
 	if (aat2870->en_pin >= 0) {
-		ret = gpio_request_one(aat2870->en_pin, GPIOF_OUT_INIT_HIGH,
-				       "aat2870-en");
+		ret = devm_gpio_request_one(&client->dev, aat2870->en_pin,
+					GPIOF_OUT_INIT_HIGH, "aat2870-en");
 		if (ret < 0) {
 			dev_err(&client->dev,
 				"Failed to request GPIO %d\n", aat2870->en_pin);
-			goto out_kfree;
+			return ret;
 		}
 	}
 
@@ -436,11 +436,6 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 
 out_disable:
 	aat2870_disable(aat2870);
-	if (aat2870->en_pin >= 0)
-		gpio_free(aat2870->en_pin);
-out_kfree:
-	kfree(aat2870);
-out:
 	return ret;
 }
 
@@ -452,11 +447,8 @@ static int aat2870_i2c_remove(struct i2c_client *client)
 
 	mfd_remove_devices(aat2870->dev);
 	aat2870_disable(aat2870);
-	if (aat2870->en_pin >= 0)
-		gpio_free(aat2870->en_pin);
 	if (aat2870->uninit)
 		aat2870->uninit(aat2870);
-	kfree(aat2870);
 
 	return 0;
 }