summaryrefslogtreecommitdiffstats
path: root/drivers/media
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab+samsung@kernel.org>2019-03-20 06:39:44 -0400
committerMauro Carvalho Chehab <mchehab+samsung@kernel.org>2019-03-20 06:47:51 -0400
commitb60a5b8dcf49af9f2c60ae82e0383ee8e62a9a52 (patch)
tree334c77b01f1e74c125ce2226bf88934e9f4a4153 /drivers/media
parent8a3946cad244e8453e26f3ded5fe40bf2627bb30 (diff)
downloadlinux-b60a5b8dcf49af9f2c60ae82e0383ee8e62a9a52.tar.bz2
media: Kconfig files: use the right help coding style
Checkpatch wants to use 'help' instead of '---help---': WARNING: prefer 'help' over '---help---' for new help texts Let's change it globally at the media subsystem, as otherwise people would keep using the old way. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/Kconfig20
-rw-r--r--drivers/media/cec/Kconfig4
-rw-r--r--drivers/media/common/siano/Kconfig4
-rw-r--r--drivers/media/i2c/Kconfig184
-rw-r--r--drivers/media/i2c/cx25840/Kconfig2
-rw-r--r--drivers/media/i2c/et8ek8/Kconfig2
-rw-r--r--drivers/media/i2c/m5mols/Kconfig2
-rw-r--r--drivers/media/i2c/smiapp/Kconfig2
-rw-r--r--drivers/media/mmc/siano/Kconfig2
-rw-r--r--drivers/media/pci/bt8xx/Kconfig2
-rw-r--r--drivers/media/pci/cobalt/Kconfig2
-rw-r--r--drivers/media/pci/cx18/Kconfig4
-rw-r--r--drivers/media/pci/cx23885/Kconfig4
-rw-r--r--drivers/media/pci/cx25821/Kconfig4
-rw-r--r--drivers/media/pci/cx88/Kconfig10
-rw-r--r--drivers/media/pci/ddbridge/Kconfig4
-rw-r--r--drivers/media/pci/dt3155/Kconfig2
-rw-r--r--drivers/media/pci/intel/ipu3/Kconfig2
-rw-r--r--drivers/media/pci/ivtv/Kconfig10
-rw-r--r--drivers/media/pci/meye/Kconfig2
-rw-r--r--drivers/media/pci/netup_unidvb/Kconfig2
-rw-r--r--drivers/media/pci/ngene/Kconfig2
-rw-r--r--drivers/media/pci/saa7134/Kconfig10
-rw-r--r--drivers/media/pci/saa7146/Kconfig6
-rw-r--r--drivers/media/pci/saa7164/Kconfig2
-rw-r--r--drivers/media/pci/solo6x10/Kconfig2
-rw-r--r--drivers/media/pci/tw5864/Kconfig2
-rw-r--r--drivers/media/pci/tw68/Kconfig2
-rw-r--r--drivers/media/platform/Kconfig72
-rw-r--r--drivers/media/platform/atmel/Kconfig2
-rw-r--r--drivers/media/platform/marvell-ccic/Kconfig4
-rw-r--r--drivers/media/platform/omap/Kconfig2
-rw-r--r--drivers/media/platform/rcar-vin/Kconfig2
-rw-r--r--drivers/media/platform/sti/c8sectpfe/Kconfig2
-rw-r--r--drivers/media/platform/vimc/Kconfig2
-rw-r--r--drivers/media/platform/vivid/Kconfig6
-rw-r--r--drivers/media/platform/xilinx/Kconfig6
-rw-r--r--drivers/media/radio/Kconfig54
-rw-r--r--drivers/media/radio/si470x/Kconfig6
-rw-r--r--drivers/media/radio/si4713/Kconfig6
-rw-r--r--drivers/media/rc/Kconfig80
-rw-r--r--drivers/media/rc/keymaps/Kconfig2
-rw-r--r--drivers/media/spi/Kconfig2
-rw-r--r--drivers/media/usb/airspy/Kconfig2
-rw-r--r--drivers/media/usb/au0828/Kconfig6
-rw-r--r--drivers/media/usb/cpia2/Kconfig2
-rw-r--r--drivers/media/usb/cx231xx/Kconfig8
-rw-r--r--drivers/media/usb/em28xx/Kconfig8
-rw-r--r--drivers/media/usb/go7007/Kconfig8
-rw-r--r--drivers/media/usb/gspca/Kconfig2
-rw-r--r--drivers/media/usb/hackrf/Kconfig2
-rw-r--r--drivers/media/usb/hdpvr/Kconfig2
-rw-r--r--drivers/media/usb/pulse8-cec/Kconfig2
-rw-r--r--drivers/media/usb/pvrusb2/Kconfig8
-rw-r--r--drivers/media/usb/pwc/Kconfig4
-rw-r--r--drivers/media/usb/rainshadow-cec/Kconfig2
-rw-r--r--drivers/media/usb/siano/Kconfig2
-rw-r--r--drivers/media/usb/stk1160/Kconfig2
-rw-r--r--drivers/media/usb/stkwebcam/Kconfig2
-rw-r--r--drivers/media/usb/tm6000/Kconfig4
-rw-r--r--drivers/media/usb/usbtv/Kconfig2
-rw-r--r--drivers/media/usb/usbvision/Kconfig2
-rw-r--r--drivers/media/usb/uvc/Kconfig4
-rw-r--r--drivers/media/usb/zr364xx/Kconfig2
-rw-r--r--drivers/media/v4l2-core/Kconfig8
65 files changed, 314 insertions, 314 deletions
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 102eb35fcf3f..8efaf99243e0 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -31,14 +31,14 @@ comment "Multimedia core support"
#
config MEDIA_CAMERA_SUPPORT
bool "Cameras/video grabbers support"
- ---help---
+ help
Enable support for webcams and video grabbers.
Say Y when you have a webcam or a video capture grabber board.
config MEDIA_ANALOG_TV_SUPPORT
bool "Analog TV support"
- ---help---
+ help
Enable analog TV support.
Say Y when you have a TV board with analog support or with a
@@ -50,7 +50,7 @@ config MEDIA_ANALOG_TV_SUPPORT
config MEDIA_DIGITAL_TV_SUPPORT
bool "Digital TV support"
- ---help---
+ help
Enable digital TV support.
Say Y when you have a board with digital support or a board with
@@ -58,7 +58,7 @@ config MEDIA_DIGITAL_TV_SUPPORT
config MEDIA_RADIO_SUPPORT
bool "AM/FM radio receivers/transmitters support"
- ---help---
+ help
Enable AM/FM radio support.
Additional info and docs are available on the web at
@@ -72,14 +72,14 @@ config MEDIA_RADIO_SUPPORT
config MEDIA_SDR_SUPPORT
bool "Software defined radio support"
- ---help---
+ help
Enable software defined radio support.
Say Y when you have a software defined radio device.
config MEDIA_CEC_SUPPORT
bool "HDMI CEC support"
- ---help---
+ help
Enable support for HDMI CEC (Consumer Electronics Control),
which is an optional HDMI feature.
@@ -96,7 +96,7 @@ source "drivers/media/cec/Kconfig"
config MEDIA_CONTROLLER
bool "Media Controller API"
depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
- ---help---
+ help
Enable the media controller API used to query media devices internal
topology and configure it dynamically.
@@ -105,7 +105,7 @@ config MEDIA_CONTROLLER
config MEDIA_CONTROLLER_DVB
bool "Enable Media controller for DVB (EXPERIMENTAL)"
depends on MEDIA_CONTROLLER && DVB_CORE
- ---help---
+ help
Enable the media controller API support for DVB.
This is currently experimental.
@@ -114,7 +114,7 @@ config MEDIA_CONTROLLER_REQUEST_API
bool "Enable Media controller Request API (EXPERIMENTAL)"
depends on MEDIA_CONTROLLER && STAGING_MEDIA
default n
- ---help---
+ help
DO NOT ENABLE THIS OPTION UNLESS YOU KNOW WHAT YOU'RE DOING.
This option enables the Request API for the Media controller and V4L2
@@ -137,7 +137,7 @@ config VIDEO_DEV
config VIDEO_V4L2_SUBDEV_API
bool "V4L2 sub-device userspace API"
depends on VIDEO_DEV && MEDIA_CONTROLLER
- ---help---
+ help
Enables the V4L2 sub-device pad-level userspace API used to configure
video format, size and frame rate between hardware blocks.
diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig
index 9c2b108c613a..b5aadacf335a 100644
--- a/drivers/media/cec/Kconfig
+++ b/drivers/media/cec/Kconfig
@@ -2,11 +2,11 @@ config MEDIA_CEC_RC
bool "HDMI CEC RC integration"
depends on CEC_CORE && RC_CORE
depends on CEC_CORE=m || RC_CORE=y
- ---help---
+ help
Pass on CEC remote control messages to the RC framework.
config CEC_PIN_ERROR_INJ
bool "Enable CEC error injection support"
depends on CEC_PIN && DEBUG_FS
- ---help---
+ help
This option enables CEC error injection using debugfs.
diff --git a/drivers/media/common/siano/Kconfig b/drivers/media/common/siano/Kconfig
index 4bfbd5f463d1..577880b133eb 100644
--- a/drivers/media/common/siano/Kconfig
+++ b/drivers/media/common/siano/Kconfig
@@ -15,7 +15,7 @@ config SMS_SIANO_RC
depends on SMS_USB_DRV || SMS_SDIO_DRV
depends on MEDIA_COMMON_OPTIONS
default y
- ---help---
+ help
Choose Y to select Remote Controller support for Siano driver.
config SMS_SIANO_DEBUGFS
@@ -24,7 +24,7 @@ config SMS_SIANO_DEBUGFS
depends on DEBUG_FS
depends on SMS_USB_DRV = SMS_SDIO_DRV
- ---help---
+ help
Choose Y to enable visualizing a dump of the frontend
statistics response packets via debugfs. Currently, works
only with Siano USB devices.
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 1ef6335463c1..1a1746b3db91 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_IR_I2C
tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
depends on I2C && RC_CORE
default y
- ---help---
+ help
Most boards have an IR chip directly connected via GPIO. However,
some video boards have the IR connected via I2C bus.
@@ -29,7 +29,7 @@ comment "Audio decoders, processors and mixers"
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
tea6320, tea6420, tda8425, ta8874z.
@@ -41,7 +41,7 @@ config VIDEO_TVAUDIO
config VIDEO_TDA7432
tristate "Philips TDA7432 audio processor"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for tda7432 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
@@ -50,7 +50,7 @@ config VIDEO_TDA7432
config VIDEO_TDA9840
tristate "Philips TDA9840 audio processor"
depends on I2C
- ---help---
+ help
Support for tda9840 audio decoder chip found on some Zoran boards.
To compile this driver as a module, choose M here: the
@@ -62,7 +62,7 @@ config VIDEO_TDA1997X
depends on SND_SOC
select SND_PCM
select HDMI
- ---help---
+ help
V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
To compile this driver as a module, choose M here: the
@@ -71,7 +71,7 @@ config VIDEO_TDA1997X
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
depends on I2C
- ---help---
+ help
Support for tea6415c audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
@@ -80,7 +80,7 @@ config VIDEO_TEA6415C
config VIDEO_TEA6420
tristate "Philips TEA6420 audio processor"
depends on I2C
- ---help---
+ help
Support for tea6420 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
@@ -89,7 +89,7 @@ config VIDEO_TEA6420
config VIDEO_MSP3400
tristate "Micronas MSP34xx audio decoders"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose M here: the
@@ -98,7 +98,7 @@ config VIDEO_MSP3400
config VIDEO_CS3308
tristate "Cirrus Logic CS3308 audio ADC"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Cirrus Logic CS3308 High Performance 8-Channel
Analog Volume Control
@@ -108,7 +108,7 @@ config VIDEO_CS3308
config VIDEO_CS5345
tristate "Cirrus Logic CS5345 audio ADC"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
stereo A/D converter.
@@ -118,7 +118,7 @@ config VIDEO_CS5345
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
@@ -128,7 +128,7 @@ config VIDEO_CS53L32A
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose M here: the
@@ -137,7 +137,7 @@ config VIDEO_TLV320AIC23B
config VIDEO_UDA1342
tristate "Philips UDA1342 audio codec"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Philips UDA1342 audio codec.
To compile this driver as a module, choose M here: the
@@ -146,7 +146,7 @@ config VIDEO_UDA1342
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
@@ -156,7 +156,7 @@ config VIDEO_WM8775
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
@@ -166,7 +166,7 @@ config VIDEO_WM8739
config VIDEO_VP27SMPX
tristate "Panasonic VP27's internal MPX"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose M here: the
@@ -200,7 +200,7 @@ comment "Video decoders"
config VIDEO_ADV7180
tristate "Analog Devices ADV7180 decoder"
depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
Support for the Analog Devices ADV7180 video decoder.
To compile this driver as a module, choose M here: the
@@ -209,7 +209,7 @@ config VIDEO_ADV7180
config VIDEO_ADV7183
tristate "Analog Devices ADV7183 decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
V4l2 subdevice driver for the Analog Devices
ADV7183 video decoder.
@@ -222,7 +222,7 @@ config VIDEO_ADV748X
depends on OF
select REGMAP_I2C
select V4L2_FWNODE
- ---help---
+ help
V4L2 subdevice driver for the Analog Devices
ADV7481 and ADV7482 HDMI/Analog video decoders.
@@ -235,7 +235,7 @@ config VIDEO_ADV7604
depends on GPIOLIB || COMPILE_TEST
select HDMI
select V4L2_FWNODE
- ---help---
+ help
Support for the Analog Devices ADV7604 video decoder.
This is a Analog Devices Component/Graphics Digitizer
@@ -248,7 +248,7 @@ config VIDEO_ADV7604_CEC
bool "Enable Analog Devices ADV7604 CEC support"
depends on VIDEO_ADV7604
select CEC_CORE
- ---help---
+ help
When selected the adv7604 will support the optional
HDMI CEC feature.
@@ -256,7 +256,7 @@ config VIDEO_ADV7842
tristate "Analog Devices ADV7842 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
select HDMI
- ---help---
+ help
Support for the Analog Devices ADV7842 video decoder.
This is a Analog Devices Component/Graphics/SD Digitizer
@@ -269,14 +269,14 @@ config VIDEO_ADV7842_CEC
bool "Enable Analog Devices ADV7842 CEC support"
depends on VIDEO_ADV7842
select CEC_CORE
- ---help---
+ help
When selected the adv7842 will support the optional
HDMI CEC feature.
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for BT819A video decoder.
To compile this driver as a module, choose M here: the
@@ -285,7 +285,7 @@ config VIDEO_BT819
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for BT856 video decoder.
To compile this driver as a module, choose M here: the
@@ -294,7 +294,7 @@ config VIDEO_BT856
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for BT866 video decoder.
To compile this driver as a module, choose M here: the
@@ -303,7 +303,7 @@ config VIDEO_BT866
config VIDEO_KS0127
tristate "KS0127 video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for KS0127 video decoder.
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
@@ -315,7 +315,7 @@ config VIDEO_KS0127
config VIDEO_ML86V7667
tristate "OKI ML86V7667 video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the OKI Semiconductor ML86V7667 video decoder.
To compile this driver as a module, choose M here: the
@@ -324,7 +324,7 @@ config VIDEO_ML86V7667
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose M here: the
@@ -333,7 +333,7 @@ config VIDEO_SAA7110
config VIDEO_SAA711X
tristate "Philips SAA7111/3/4/5 video decoders"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose M here: the
@@ -344,7 +344,7 @@ config VIDEO_TC358743
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
select HDMI
select V4L2_FWNODE
- ---help---
+ help
Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
To compile this driver as a module, choose M here: the
@@ -354,7 +354,7 @@ config VIDEO_TC358743_CEC
bool "Enable Toshiba TC358743 CEC support"
depends on VIDEO_TC358743
select CEC_CORE
- ---help---
+ help
When selected the tc358743 will support the optional
HDMI CEC feature.
@@ -362,7 +362,7 @@ config VIDEO_TVP514X
tristate "Texas Instruments TVP514x video decoder"
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
controller.
@@ -374,7 +374,7 @@ config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
- ---help---
+ help
Support for the Texas Instruments TVP5150 video decoder.
To compile this driver as a module, choose M here: the
@@ -384,7 +384,7 @@ config VIDEO_TVP7002
tristate "Texas Instruments TVP7002 video decoder"
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
- ---help---
+ help
Support for the Texas Instruments TVP7002 video decoder.
To compile this driver as a module, choose M here: the
@@ -393,7 +393,7 @@ config VIDEO_TVP7002
config VIDEO_TW2804
tristate "Techwell TW2804 multiple video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Techwell tw2804 multiple video decoder.
To compile this driver as a module, choose M here: the
@@ -402,7 +402,7 @@ config VIDEO_TW2804
config VIDEO_TW9903
tristate "Techwell TW9903 video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Techwell tw9903 multi-standard video decoder
with high quality down scaler.
@@ -412,7 +412,7 @@ config VIDEO_TW9903
config VIDEO_TW9906
tristate "Techwell TW9906 video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Techwell tw9906 enhanced multi-standard comb filter
video decoder with YCbCr input support.
@@ -422,7 +422,7 @@ config VIDEO_TW9906
config VIDEO_TW9910
tristate "Techwell TW9910 video decoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
To compile this driver as a module, choose M here: the
@@ -431,7 +431,7 @@ config VIDEO_TW9910
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for VPX322x video decoders.
To compile this driver as a module, choose M here: the
@@ -442,7 +442,7 @@ comment "Video and audio decoders"
config VIDEO_SAA717X
tristate "Philips SAA7171/3/4 audio/video decoders"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Philips SAA7171/3/4 audio/video decoders.
To compile this driver as a module, choose M here: the
@@ -455,7 +455,7 @@ comment "Video encoders"
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose M here: the
@@ -464,7 +464,7 @@ config VIDEO_SAA7127
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Philips SAA7185 video encoder.
To compile this driver as a module, choose M here: the
@@ -473,7 +473,7 @@ config VIDEO_SAA7185
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Analog Devices ADV7170 video encoder driver
To compile this driver as a module, choose M here: the
@@ -482,7 +482,7 @@ config VIDEO_ADV7170
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose M here: the
@@ -510,7 +510,7 @@ config VIDEO_ADV7511
tristate "Analog Devices ADV7511 encoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
select HDMI
- ---help---
+ help
Support for the Analog Devices ADV7511 video encoder.
This is a Analog Devices HDMI transmitter.
@@ -522,14 +522,14 @@ config VIDEO_ADV7511_CEC
bool "Enable Analog Devices ADV7511 CEC support"
depends on VIDEO_ADV7511
select CEC_CORE
- ---help---
+ help
When selected the adv7511 will support the optional
HDMI CEC feature.
config VIDEO_AD9389B
tristate "Analog Devices AD9389B encoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
Support for the Analog Devices AD9389B video encoder.
This is a Analog Devices HDMI transmitter.
@@ -546,7 +546,7 @@ config VIDEO_AK881X
config VIDEO_THS8200
tristate "Texas Instruments THS8200 video encoder"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Texas Instruments THS8200 video encoder.
To compile this driver as a module, choose M here: the
@@ -576,7 +576,7 @@ config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Sony
IMX258 camera.
@@ -588,7 +588,7 @@ config VIDEO_IMX274
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select REGMAP_I2C
- ---help---
+ help
This is a V4L2 sensor driver for the Sony IMX274
CMOS image sensor.
@@ -630,7 +630,7 @@ config VIDEO_OV2659
depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV2659 camera.
@@ -642,7 +642,7 @@ config VIDEO_OV2680
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV2680 camera.
@@ -654,7 +654,7 @@ config VIDEO_OV2685
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV2685 camera.
@@ -667,7 +667,7 @@ config VIDEO_OV5640
depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Omnivision
OV5640 camera sensor with a MIPI CSI-2 interface.
@@ -677,7 +677,7 @@ config VIDEO_OV5645
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV5645 camera.
@@ -689,7 +689,7 @@ config VIDEO_OV5647
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV5647 camera.
@@ -700,7 +700,7 @@ config VIDEO_OV6650
tristate "OmniVision OV6650 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV6650 camera.
@@ -713,7 +713,7 @@ config VIDEO_OV5670
depends on MEDIA_CAMERA_SUPPORT
depends on MEDIA_CONTROLLER
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV5670 camera.
@@ -724,7 +724,7 @@ config VIDEO_OV5695
tristate "OmniVision OV5695 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV5695 camera.
@@ -748,7 +748,7 @@ config VIDEO_OV772X
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
select REGMAP_SCCB
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV772x camera.
@@ -759,7 +759,7 @@ config VIDEO_OV7640
tristate "OmniVision OV7640 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV7640 camera.
@@ -771,7 +771,7 @@ config VIDEO_OV7670
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
@@ -780,7 +780,7 @@ config VIDEO_OV7740
tristate "OmniVision OV7740 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV7740 VGA camera sensor.
@@ -807,7 +807,7 @@ config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select REGMAP_SCCB
- ---help---
+ help
This is a V4L2 sensor driver for the Omnivision
OV9650 and OV9652 camera sensors.
@@ -816,7 +816,7 @@ config VIDEO_OV13858
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the OmniVision
OV13858 camera.
@@ -824,7 +824,7 @@ config VIDEO_VS6624
tristate "ST VS6624 sensor support"
depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the ST VS6624
camera.
@@ -844,7 +844,7 @@ config VIDEO_MT9M032
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select VIDEO_APTINA_PLL
- ---help---
+ help
This driver supports MT9M032 camera sensors from Aptina, monochrome
models only.
@@ -861,7 +861,7 @@ config VIDEO_MT9P031
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select VIDEO_APTINA_PLL
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt9p031 5 Mpixel camera.
@@ -869,7 +869,7 @@ config VIDEO_MT9T001
tristate "Aptina MT9T001 support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt0t001 3 Mpixel camera.
@@ -877,7 +877,7 @@ config VIDEO_MT9T112
tristate "Aptina MT9T111/MT9T112 support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) MT9T111 and MT9T112 3 Mpixel camera.
@@ -888,7 +888,7 @@ config VIDEO_MT9V011
tristate "Micron mt9v011 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Micron
mt0v011 1.3 Mpixel camera. It currently only works with the
em28xx driver.
@@ -899,7 +899,7 @@ config VIDEO_MT9V032
depends on MEDIA_CAMERA_SUPPORT
select REGMAP_I2C
select V4L2_FWNODE
- ---help---
+ help
This is a Video4Linux2 sensor driver for the Micron
MT9V032 752x480 CMOS sensor.
@@ -918,14 +918,14 @@ config VIDEO_SR030PC30
tristate "Siliconfile SR030PC30 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This driver supports SR030PC30 VGA camera from Siliconfile
config VIDEO_NOON010PC30
tristate "Siliconfile NOON010PC30 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This driver supports NOON010PC30 CIF camera from Siliconfile
source "drivers/media/i2c/m5mols/Kconfig"
@@ -945,7 +945,7 @@ config VIDEO_S5K6AA
tristate "Samsung S5K6AAFX sensor support"
depends on MEDIA_CAMERA_SUPPORT
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
@@ -953,7 +953,7 @@ config VIDEO_S5K6A3
tristate "Samsung S5K6A3 sensor support"
depends on MEDIA_CAMERA_SUPPORT
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
This is a V4L2 sensor driver for Samsung S5K6A3 raw
camera sensor.
@@ -961,7 +961,7 @@ config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select CRC32
- ---help---
+ help
This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
camera sensor with an embedded SoC image signal processor.
@@ -969,7 +969,7 @@ config VIDEO_S5K5BAF
tristate "Samsung S5K5BAF sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
- ---help---
+ help
This is a V4L2 sensor driver for Samsung S5K5BAF 2M
camera sensor with an embedded SoC image signal processor.
@@ -980,7 +980,7 @@ config VIDEO_S5C73M3
tristate "Samsung S5C73M3 sensor support"
depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
- ---help---
+ help
This is a V4L2 sensor driver for Samsung S5C73M3
8 Mpixel camera.
@@ -989,7 +989,7 @@ comment "Lens drivers"
config VIDEO_AD5820
tristate "AD5820 lens voice coil support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
- ---help---
+ help
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
@@ -1007,7 +1007,7 @@ config VIDEO_DW9714
tristate "DW9714 lens voice coil support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
This is a driver for the DW9714 camera lens voice coil.
DW9714 is a 10 bit DAC with 120mA output current sink
capability. This is designed for linear control of
@@ -1017,7 +1017,7 @@ config VIDEO_DW9807_VCM
tristate "DW9807 lens voice coil support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
This is a driver for the DW9807 camera lens voice coil.
DW9807 is a 10 bit DAC with 100mA output current sink
capability. This is designed for linear control of
@@ -1029,7 +1029,7 @@ config VIDEO_ADP1653
tristate "ADP1653 flash support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
@@ -1038,7 +1038,7 @@ config VIDEO_LM3560
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
select REGMAP_I2C
- ---help---
+ help
This is a driver for the lm3560 dual flash controllers. It controls
flash, torch LEDs.
@@ -1047,7 +1047,7 @@ config VIDEO_LM3646
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
select REGMAP_I2C
- ---help---
+ help
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
@@ -1056,7 +1056,7 @@ comment "Video improvement chips"
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
Japan and is used to reduce the 'ghosting' effect that can
@@ -1068,7 +1068,7 @@ config VIDEO_UPD64031A
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
the colors of a composite signal.
@@ -1082,7 +1082,7 @@ config VIDEO_SAA6752HS
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
depends on VIDEO_V4L2 && I2C
select CRC32
- ---help---
+ help
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer.
@@ -1094,7 +1094,7 @@ comment "SDR tuner chips"
config SDR_MAX2175
tristate "Maxim 2175 RF to Bits tuner"
depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
- ---help---
+ help
Support for Maxim 2175 tuner. It is an advanced analog/digital
radio receiver with RF-to-Bits front-end designed for SDR solutions.
@@ -1115,7 +1115,7 @@ config VIDEO_THS7303
config VIDEO_M52790
tristate "Mitsubishi M52790 A/V switch"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Mitsubishi M52790 A/V switch.
To compile this driver as a module, choose M here: the
@@ -1126,7 +1126,7 @@ config VIDEO_I2C
depends on VIDEO_V4L2 && I2C
select VIDEOBUF2_VMALLOC
imply HWMON
- ---help---
+ help
Enable the I2C transport video support which supports the
following:
* Panasonic AMG88xx Grid-Eye Sensors
diff --git a/drivers/media/i2c/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig
index 451133ad41ff..f4b31d7cb440 100644
--- a/drivers/media/i2c/cx25840/Kconfig
+++ b/drivers/media/i2c/cx25840/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_CX25840
tristate "Conexant CX2584x audio/video decoders"
depends on VIDEO_V4L2 && I2C
- ---help---
+ help
Support for the Conexant CX2584x audio/video decoders.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig
index 9fe409e95666..ab23b41bf353 100644
--- a/drivers/media/i2c/et8ek8/Kconfig
+++ b/drivers/media/i2c/et8ek8/Kconfig
@@ -2,6 +2,6 @@ config VIDEO_ET8EK8
tristate "ET8EK8 camera sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
- ---help---
+ help
This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
It is used for example in Nokia N900 (RX-51).
diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig
index dc8c2505907e..be0bb3f1bc22 100644
--- a/drivers/media/i2c/m5mols/Kconfig
+++ b/drivers/media/i2c/m5mols/Kconfig
@@ -2,5 +2,5 @@ config VIDEO_M5MOLS
tristate "Fujitsu M-5MOLS 8MP sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This driver supports Fujitsu M-5MOLS camera sensor with ISP
diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig
index f59718d8e51e..26b54f2aa95b 100644
--- a/drivers/media/i2c/smiapp/Kconfig
+++ b/drivers/media/i2c/smiapp/Kconfig
@@ -4,5 +4,5 @@ config VIDEO_SMIAPP
depends on MEDIA_CAMERA_SUPPORT
select VIDEO_SMIAPP_PLL
select V4L2_FWNODE
- ---help---
+ help
This is a generic driver for SMIA++/SMIA camera modules.
diff --git a/drivers/media/mmc/siano/Kconfig b/drivers/media/mmc/siano/Kconfig
index 7693487e2f63..3941ee8352bb 100644
--- a/drivers/media/mmc/siano/Kconfig
+++ b/drivers/media/mmc/siano/Kconfig
@@ -9,5 +9,5 @@ config SMS_SDIO_DRV
depends on !RC_CORE || RC_CORE
select MEDIA_COMMON_OPTIONS
select SMS_SIANO_MDTV
- ---help---
+ help
Choose if you would like to have Siano's support for SDIO interface
diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
index bc89e37608cd..0f46db7d5ffc 100644
--- a/drivers/media/pci/bt8xx/Kconfig
+++ b/drivers/media/pci/bt8xx/Kconfig
@@ -13,7 +13,7 @@ config VIDEO_BT848
select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT
select RADIO_ADAPTERS
select RADIO_TEA575X
- ---help---
+ help
Support for BT848 based frame grabber/overlay boards. This includes
the Miro, Hauppauge and STB boards. Please read the material in
<file:Documentation/media/v4l-drivers/bttv.rst> for more information.
diff --git a/drivers/media/pci/cobalt/Kconfig b/drivers/media/pci/cobalt/Kconfig
index aa35cbc0a904..9a544bab3178 100644
--- a/drivers/media/pci/cobalt/Kconfig
+++ b/drivers/media/pci/cobalt/Kconfig
@@ -11,7 +11,7 @@ config VIDEO_COBALT
select VIDEO_ADV7511
select VIDEO_ADV7842
select VIDEOBUF2_DMA_SG
- ---help---
+ help
This is a video4linux driver for the Cisco PCIe Cobalt card.
This board is sadly not available outside of Cisco, but it is
diff --git a/drivers/media/pci/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig
index c675b83c43a9..96477bba0d5c 100644
--- a/drivers/media/pci/cx18/Kconfig
+++ b/drivers/media/pci/cx18/Kconfig
@@ -13,7 +13,7 @@ config VIDEO_CX18
select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
@@ -27,7 +27,7 @@ config VIDEO_CX18_ALSA
tristate "Conexant 23418 DMA audio support"
depends on VIDEO_CX18 && SND
select SND_PCM
- ---help---
+ help
This is a video4linux driver for direct (DMA) audio on
Conexant 23418 based TV cards using ALSA.
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index 3435bbaa3167..1bba9e497915 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -43,7 +43,7 @@ config VIDEO_CX23885
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_M88RS6000T if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for Conexant 23885 based
TV cards.
@@ -54,7 +54,7 @@ config MEDIA_ALTERA_CI
tristate "Altera FPGA based CI module"
depends on VIDEO_CX23885 && DVB_CORE
select ALTERA_STAPL
- ---help---
+ help
An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/pci/cx25821/Kconfig b/drivers/media/pci/cx25821/Kconfig
index 1755d3d2feaa..a64fa9a6d5d5 100644
--- a/drivers/media/pci/cx25821/Kconfig
+++ b/drivers/media/pci/cx25821/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_CX25821
depends on VIDEO_DEV && PCI && I2C
select I2C_ALGOBIT
select VIDEOBUF2_DMA_SG
- ---help---
+ help
This is a video4linux driver for Conexant 25821 based
TV cards.
@@ -14,7 +14,7 @@ config VIDEO_CX25821_ALSA
tristate "Conexant 25821 DMA audio support"
depends on VIDEO_CX25821 && SND
select SND_PCM
- ---help---
+ help
This is a video4linux driver for direct (DMA) audio on
Conexant 25821 based capture cards using ALSA.
diff --git a/drivers/media/pci/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig
index 14b813d634a8..fbb17ddb6bc3 100644
--- a/drivers/media/pci/cx88/Kconfig
+++ b/drivers/media/pci/cx88/Kconfig
@@ -6,7 +6,7 @@ config VIDEO_CX88
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_WM8775 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for Conexant 2388x based
TV cards.
@@ -17,7 +17,7 @@ config VIDEO_CX88_ALSA
tristate "Conexant 2388x DMA audio support"
depends on VIDEO_CX88 && SND
select SND_PCM
- ---help---
+ help
This is a video4linux driver for direct (DMA) audio on
Conexant 2388x based TV cards using ALSA.
@@ -33,7 +33,7 @@ config VIDEO_CX88_BLACKBIRD
tristate "Blackbird MPEG encoder support (cx2388x + cx23416)"
depends on VIDEO_CX88
select VIDEO_CX2341X
- ---help---
+ help
This adds support for MPEG encoder cards based on the
Blackbird reference design, using the Conexant 2388x
and 23416 chips.
@@ -64,7 +64,7 @@ config VIDEO_CX88_DVB
select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.
@@ -75,7 +75,7 @@ config VIDEO_CX88_ENABLE_VP3054
bool "VP-3054 Secondary I2C Bus Support"
default y
depends on VIDEO_CX88_DVB && DVB_MT352
- ---help---
+ help
This adds DVB-T support for cards based on the
Conexant 2388x chip and the MT352 demodulator,
which also require support for the VP-3054
diff --git a/drivers/media/pci/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig
index 16faef265e97..fc98b6d575d9 100644
--- a/drivers/media/pci/ddbridge/Kconfig
+++ b/drivers/media/pci/ddbridge/Kconfig
@@ -15,7 +15,7 @@ config DVB_DDBRIDGE
select DVB_MXL5XX if MEDIA_SUBDRV_AUTOSELECT
select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
select DVB_DUMMY_FE if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
Support for cards with the Digital Devices PCI express bridge:
- Octopus PCIe Bridge
- Octopus mini PCIe Bridge
@@ -36,7 +36,7 @@ config DVB_DDBRIDGE_MSIENABLE
depends on DVB_DDBRIDGE
depends on PCI_MSI
default n
- ---help---
+ help
Use PCI MSI (Message Signaled Interrupts) per default. Enabling this
might lead to I2C errors originating from the bridge in conjunction
with certain SATA controllers, requiring a reload of the ddbridge
diff --git a/drivers/media/pci/dt3155/Kconfig b/drivers/media/pci/dt3155/Kconfig
index 858b0f2f15be..d770eec541d4 100644
--- a/drivers/media/pci/dt3155/Kconfig
+++ b/drivers/media/pci/dt3155/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_DT3155
depends on PCI && VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_DMA_CONTIG
default n
- ---help---
+ help
Enables dt3155 device driver for the DataTranslation DT3155 frame grabber.
Say Y here if you have this hardware.
In doubt, say N.
diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig
index 715f77651482..bd518bdc9f5f 100644
--- a/drivers/media/pci/intel/ipu3/Kconfig
+++ b/drivers/media/pci/intel/ipu3/Kconfig
@@ -7,7 +7,7 @@ config VIDEO_IPU3_CIO2
select V4L2_FWNODE
select VIDEOBUF2_DMA_SG
- ---help---
+ help
This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel
Skylake and Kaby Lake SoCs and used for capturing images and
video from a camera sensor.
diff --git a/drivers/media/pci/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig
index 06ca4e23f9fb..e96b3c182a2f 100644
--- a/drivers/media/pci/ivtv/Kconfig
+++ b/drivers/media/pci/ivtv/Kconfig
@@ -18,7 +18,7 @@ config VIDEO_IVTV
select VIDEO_VP27SMPX
select VIDEO_UPD64031A
select VIDEO_UPD64083
- ---help---
+ help
This is a video4linux driver for Conexant cx23416 or cx23415 based
PCI personal video recorder devices.
@@ -32,7 +32,7 @@ config VIDEO_IVTV_DEPRECATED_IOCTLS
bool "enable the DVB ioctls abuse on ivtv driver"
depends on VIDEO_IVTV
default n
- ---help---
+ help
Enable the usage of the a DVB set of ioctls that were abused by
IVTV driver for a while.
@@ -45,7 +45,7 @@ config VIDEO_IVTV_ALSA
tristate "Conexant cx23415/cx23416 ALSA interface for PCM audio capture"
depends on VIDEO_IVTV && SND
select SND_PCM
- ---help---
+ help
This driver provides an ALSA interface as another method for user
applications to obtain PCM audio data from Conexant cx23415/cx23416
based PCI TV cards supported by the ivtv driver.
@@ -63,7 +63,7 @@ config VIDEO_FB_IVTV
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- ---help---
+ help
This is a framebuffer driver for the Conexant cx23415 MPEG
encoder/decoder.
@@ -77,7 +77,7 @@ config VIDEO_FB_IVTV_FORCE_PAT
bool "force cx23415 framebuffer init with x86 PAT enabled"
depends on VIDEO_FB_IVTV && X86_PAT
default n
- ---help---
+ help
With PAT enabled, the cx23415 framebuffer driver does not
utilize write-combined caching on the framebuffer memory.
For this reason, the driver will by default disable itself
diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig
index 9a50f54231ad..ce0463c81886 100644
--- a/drivers/media/pci/meye/Kconfig
+++ b/drivers/media/pci/meye/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
depends on PCI && VIDEO_V4L2
depends on SONY_LAPTOP || COMPILE_TEST
- ---help---
+ help
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
<file:Documentation/media/v4l-drivers/meye.rst> for more information.
diff --git a/drivers/media/pci/netup_unidvb/Kconfig b/drivers/media/pci/netup_unidvb/Kconfig
index b663154d0cc4..60057585f04c 100644
--- a/drivers/media/pci/netup_unidvb/Kconfig
+++ b/drivers/media/pci/netup_unidvb/Kconfig
@@ -8,7 +8,7 @@ config DVB_NETUP_UNIDVB
select DVB_HELENE if MEDIA_SUBDRV_AUTOSELECT
select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
Support for NetUP PCI express Universal DVB card.
Say Y when you want to support NetUP Dual Universal DVB card.
diff --git a/drivers/media/pci/ngene/Kconfig b/drivers/media/pci/ngene/Kconfig
index e06d019996f3..8a80a5bab8e9 100644
--- a/drivers/media/pci/ngene/Kconfig
+++ b/drivers/media/pci/ngene/Kconfig
@@ -15,6 +15,6 @@ config DVB_NGENE
select DVB_STV6111 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
Support for Micronas PCI express cards with nGene bridge.
diff --git a/drivers/media/pci/saa7134/Kconfig b/drivers/media/pci/saa7134/Kconfig
index b44e0d70907e..8b28783b3fcd 100644
--- a/drivers/media/pci/saa7134/Kconfig
+++ b/drivers/media/pci/saa7134/Kconfig
@@ -7,7 +7,7 @@ config VIDEO_SAA7134
select CRC32
select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_SAA6752HS if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for Philips SAA713x based
TV cards.
@@ -18,7 +18,7 @@ config VIDEO_SAA7134_ALSA
tristate "Philips SAA7134 DMA audio support"
depends on VIDEO_SAA7134 && SND
select SND_PCM
- ---help---
+ help
This is a video4linux driver for direct (DMA) audio in
Philips SAA713x based TV cards using ALSA
@@ -31,7 +31,7 @@ config VIDEO_SAA7134_RC
depends on VIDEO_SAA7134
depends on !(RC_CORE=m && VIDEO_SAA7134=y)
default y
- ---help---
+ help
Enables Remote Controller support on saa7134 driver.
config VIDEO_SAA7134_DVB
@@ -57,7 +57,7 @@ config VIDEO_SAA7134_DVB
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This adds support for DVB cards based on the
Philips saa7134 chip.
@@ -68,6 +68,6 @@ config VIDEO_SAA7134_GO7007
tristate "go7007 support for saa7134 based TV cards"
depends on VIDEO_SAA7134
depends on VIDEO_GO7007
- ---help---
+ help
Enables saa7134 driver support for boards with go7007
MPEG encoder (WIS Voyager or compatible).
diff --git a/drivers/media/pci/saa7146/Kconfig b/drivers/media/pci/saa7146/Kconfig
index da88b77a916c..60d9862580ff 100644
--- a/drivers/media/pci/saa7146/Kconfig
+++ b/drivers/media/pci/saa7146/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
- ---help---
+ help
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
card is *not* fully supported.
@@ -14,7 +14,7 @@ config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
- ---help---
+ help
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
@@ -30,7 +30,7 @@ config VIDEO_MXB
select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for the 'Multimedia eXtension Board'
TV card by Siemens-Nixdorf.
diff --git a/drivers/media/pci/saa7164/Kconfig b/drivers/media/pci/saa7164/Kconfig
index 9098ef5feca4..265c5a4fd823 100644
--- a/drivers/media/pci/saa7164/Kconfig
+++ b/drivers/media/pci/saa7164/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_SAA7164
select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for NXP SAA7164 based
TV cards.
diff --git a/drivers/media/pci/solo6x10/Kconfig b/drivers/media/pci/solo6x10/Kconfig
index d9e06a6bf1eb..2061d02a82d0 100644
--- a/drivers/media/pci/solo6x10/Kconfig
+++ b/drivers/media/pci/solo6x10/Kconfig
@@ -8,7 +8,7 @@ config VIDEO_SOLO6X10
select VIDEOBUF2_DMA_CONTIG
select SND_PCM
select FONT_8x16
- ---help---
+ help
This driver supports the Bluecherry H.264 and MPEG-4 hardware
compression capture cards and other Softlogic-based ones.
diff --git a/drivers/media/pci/tw5864/Kconfig b/drivers/media/pci/tw5864/Kconfig
index 760fb11dfeae..e5d52f076232 100644
--- a/drivers/media/pci/tw5864/Kconfig
+++ b/drivers/media/pci/tw5864/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_TW5864
tristate "Techwell TW5864 video/audio grabber and encoder"
depends on VIDEO_DEV && PCI && VIDEO_V4L2
select VIDEOBUF2_DMA_CONTIG
- ---help---
+ help
Support for boards based on Techwell TW5864 chip which provides
multichannel video & audio grabbing and encoding (H.264, MJPEG,
ADPCM G.726).
diff --git a/drivers/media/pci/tw68/Kconfig b/drivers/media/pci/tw68/Kconfig
index 95d5d5202048..4bfc4fa416e5 100644
--- a/drivers/media/pci/tw68/Kconfig
+++ b/drivers/media/pci/tw68/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_TW68
tristate "Techwell tw68x Video For Linux"
depends on VIDEO_DEV && PCI && VIDEO_V4L2
select VIDEOBUF2_DMA_SG
- ---help---
+ help
Support for Techwell tw68xx based frame grabber boards.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 4acbed189644..1611ec23d733 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -6,7 +6,7 @@ menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
depends on MEDIA_CAMERA_SUPPORT
default n
- ---help---
+ help
Say Y here to enable support for platform-specific V4L drivers.
if V4L_PLATFORM_DRIVERS
@@ -55,7 +55,7 @@ config VIDEO_VIU
depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C
select VIDEOBUF_DMA_CONTIG
default y
- ---help---
+ help
Support for Freescale VIU video driver. This device captures
video data, or overlays video on DIU frame buffer.
@@ -80,13 +80,13 @@ config VIDEO_OMAP3
select VIDEOBUF2_DMA_CONTIG
select MFD_SYSCON
select V4L2_FWNODE
- ---help---
+ help
Driver for an OMAP 3 camera controller.
config VIDEO_OMAP3_DEBUG
bool "OMAP 3 Camera debug messages"
depends on VIDEO_OMAP3
- ---help---
+ help
Enable debug messages on OMAP 3 camera controller driver.
config VIDEO_PXA27x
@@ -96,7 +96,7 @@ config VIDEO_PXA27x
select VIDEOBUF2_DMA_SG
select SG_SPLIT
select V4L2_FWNODE
- ---help---
+ help
This is a v4l2 driver for the PXA27x Quick Capture Interface
config VIDEO_QCOM_CAMSS
@@ -112,7 +112,7 @@ config VIDEO_S3C_CAMIF
depends on PM
depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
- ---help---
+ help
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
host interface (CAMIF).
@@ -125,7 +125,7 @@ config VIDEO_STM32_DCMI
depends on ARCH_STM32 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- ---help---
+ help
This module makes the STM32 Digital Camera Memory Interface (DCMI)
available as a v4l2 device.
@@ -138,7 +138,7 @@ config VIDEO_RENESAS_CEU
depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- ---help---
+ help
This is a v4l2 driver for the Renesas CEU Interface
source "drivers/media/platform/exynos4-is/Kconfig"
@@ -155,7 +155,7 @@ config VIDEO_TI_CAL
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
default n
- ---help---
+ help
Support for the TI CAL (Camera Adaptation Layer) block
found on DRA72X SoC.
In TI Technical Reference Manual this module is referred as
@@ -168,7 +168,7 @@ menuconfig V4L_MEM2MEM_DRIVERS
depends on VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
default n
- ---help---
+ help
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
to capture and output drivers, which use memory buffers for just
@@ -184,7 +184,7 @@ config VIDEO_CODA
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
select GENERIC_ALLOCATOR
- ---help---
+ help
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
@@ -207,7 +207,7 @@ config VIDEO_MEDIATEK_JPEG
depends on ARCH_MEDIATEK || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- ---help---
+ help
Mediatek jpeg codec driver provides HW capability to decode
JPEG format
@@ -218,7 +218,7 @@ config VIDEO_MEDIATEK_VPU
tristate "Mediatek Video Processor Unit"
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
- ---help---
+ help
This driver provides downloading VPU firmware and
communicating with VPU. This driver for hw video
codec embedded in Mediatek's MT8173 SOCs. It is able
@@ -236,7 +236,7 @@ config VIDEO_MEDIATEK_MDP
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VPU
default n
- ---help---
+ help
It is a v4l2 driver and present in Mediatek MT8173 SoCs.
The driver supports for scaling and color space conversion.
@@ -252,7 +252,7 @@ config VIDEO_MEDIATEK_VCODEC
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VPU
default n
- ---help---
+ help
Mediatek video codec driver provides HW capability to
encode and decode in a range of video formats
This driver rely on VPU driver to communicate with VPU.
@@ -276,7 +276,7 @@ config VIDEO_SAMSUNG_S5P_G2D
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
default n
- ---help---
+ help
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
2d graphics accelerator.
@@ -286,7 +286,7 @@ config VIDEO_SAMSUNG_S5P_JPEG
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- ---help---
+ help
This is a v4l2 driver for Samsung S5P, EXYNOS3250
and EXYNOS4 JPEG codec
@@ -407,7 +407,7 @@ config VIDEO_RENESAS_FDP1
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- ---help---
+ help
This is a V4L2 driver for the Renesas Fine Display Processor
providing colour space conversion, and de-interlacing features.
@@ -420,7 +420,7 @@ config VIDEO_RENESAS_JPU
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- ---help---
+ help
This is a V4L2 driver for the Renesas JPEG Processing Unit.
To compile this driver as a module, choose M here: the module
@@ -430,7 +430,7 @@ config VIDEO_RENESAS_FCP
tristate "Renesas Frame Compression Processor"
depends on ARCH_RENESAS || COMPILE_TEST
depends on OF
- ---help---
+ help
This is a driver for the Renesas Frame Compression Processor (FCP).
The FCP is a companion module of video processing modules in the
Renesas R-Car Gen3 SoCs. It handles memory access for the codec,
@@ -446,7 +446,7 @@ config VIDEO_RENESAS_VSP1
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
- ---help---
+ help
This is a V4L2 driver for the Renesas VSP1 video processing engine.
To compile this driver as a module, choose M here: the module
@@ -459,7 +459,7 @@ config VIDEO_ROCKCHIP_RGA
select VIDEOBUF2_DMA_SG
select V4L2_MEM2MEM_DEV
default n
- ---help---
+ help
This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator.
Rockchip RGA is a separate 2D raster graphic acceleration unit.
It accelerates 2D graphics operations, such as point/line drawing,
@@ -477,14 +477,14 @@ config VIDEO_TI_VPE
select VIDEO_TI_SC
select VIDEO_TI_CSC
default n
- ---help---
+ help
Support for the TI VPE(Video Processing Engine) block
found on DRA7XX SoC.
config VIDEO_TI_VPE_DEBUG
bool "VPE debug messages"
depends on VIDEO_TI_VPE
- ---help---
+ help
Enable debug messages on VPE driver.
config VIDEO_QCOM_VENUS
@@ -495,7 +495,7 @@ config VIDEO_QCOM_VENUS
select QCOM_SCM if ARCH_QCOM
select VIDEOBUF2_DMA_SG
select V4L2_MEM2MEM_DEV
- ---help---
+ help
This is a V4L2 driver for Qualcomm Venus video accelerator
hardware. It accelerates encoding and decoding operations
on various Qualcomm SoCs.
@@ -530,7 +530,7 @@ config VIDEO_VIM2M
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
default n
- ---help---
+ help
This is a virtual test device for the memory-to-memory driver
framework.
@@ -542,7 +542,7 @@ menuconfig DVB_PLATFORM_DRIVERS
bool "DVB platform devices"
depends on MEDIA_DIGITAL_TV_SUPPORT
default n
- ---help---
+ help
Say Y here to enable support for platform-specific Digital TV drivers.
if DVB_PLATFORM_DRIVERS
@@ -562,7 +562,7 @@ config VIDEO_CROS_EC_CEC
select CEC_NOTIFIER
select CHROME_PLATFORMS
select CROS_EC_PROTO
- ---help---
+ help
If you say yes here you will get support for the
ChromeOS Embedded Controller's CEC.
The CEC bus is present in the HDMI connector and enables communication
@@ -573,7 +573,7 @@ config VIDEO_MESON_AO_CEC
depends on ARCH_MESON || COMPILE_TEST
select CEC_CORE
select CEC_NOTIFIER
- ---help---
+ help
This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
generic CEC framework interface.
CEC bus is present in the HDMI connector and enables communication
@@ -584,7 +584,7 @@ config CEC_GPIO
select CEC_CORE
select CEC_PIN
select GPIOLIB
- ---help---
+ help
This is a generic GPIO-based CEC driver.
The CEC bus is present in the HDMI connector and enables communication
between compatible devices.
@@ -594,7 +594,7 @@ config VIDEO_SAMSUNG_S5P_CEC
depends on ARCH_EXYNOS || COMPILE_TEST
select CEC_CORE
select CEC_NOTIFIER
- ---help---
+ help
This is a driver for Samsung S5P HDMI CEC interface. It uses the
generic CEC framework interface.
CEC bus is present in the HDMI connector and enables communication
@@ -605,7 +605,7 @@ config VIDEO_STI_HDMI_CEC
depends on ARCH_STI || COMPILE_TEST
select CEC_CORE
select CEC_NOTIFIER
- ---help---
+ help
This is a driver for STIH4xx HDMI CEC interface. It uses the
generic CEC framework interface.
CEC bus is present in the HDMI connector and enables communication
@@ -617,7 +617,7 @@ config VIDEO_STM32_HDMI_CEC
select REGMAP
select REGMAP_MMIO
select CEC_CORE
- ---help---
+ help
This is a driver for STM32 interface. It uses the
generic CEC framework interface.
CEC bus is present in the HDMI connector and enables communication
@@ -628,7 +628,7 @@ config VIDEO_TEGRA_HDMI_CEC
depends on ARCH_TEGRA || COMPILE_TEST
select CEC_CORE
select CEC_NOTIFIER
- ---help---
+ help
This is a driver for the Tegra HDMI CEC interface. It uses the
generic CEC framework interface.
The CEC bus is present in the HDMI connector and enables communication
@@ -662,7 +662,7 @@ menuconfig SDR_PLATFORM_DRIVERS
bool "SDR platform devices"
depends on MEDIA_SDR_SUPPORT
default n
- ---help---
+ help
Say Y here to enable support for platform-specific SDR Drivers.
if SDR_PLATFORM_DRIVERS
@@ -672,7 +672,7 @@ config VIDEO_RCAR_DRIF
depends on VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_VMALLOC
- ---help---
+ help
Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital
Radio Interface that interfaces with an RF front end chip. It is a
receiver of digital data which uses DMA to transfer received data to
diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig
index a211ef20f77e..c3f6a47cdc0e 100644
--- a/drivers/media/platform/atmel/Kconfig
+++ b/drivers/media/platform/atmel/Kconfig
@@ -15,6 +15,6 @@ config VIDEO_ATMEL_ISI
depends on ARCH_AT91 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- ---help---
+ help
This module makes the ATMEL Image Sensor Interface available
as a v4l2 device.
diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig
index cf12e077203a..cd88e2eed749 100644
--- a/drivers/media/platform/marvell-ccic/Kconfig
+++ b/drivers/media/platform/marvell-ccic/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_CAFE_CCIC
select VIDEOBUF2_VMALLOC
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_DMA_SG
- ---help---
+ help
This is a video4linux2 driver for the Marvell 88ALP01 integrated
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
@@ -19,7 +19,7 @@ config VIDEO_MMP_CAMERA
select VIDEOBUF2_VMALLOC
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_DMA_SG
- ---help---
+ help
This is a Video4Linux2 driver for the integrated camera
controller found on Marvell Armada 610 application
processors (and likely beyond). This is the controller found
diff --git a/drivers/media/platform/omap/Kconfig b/drivers/media/platform/omap/Kconfig
index 4b5e55d41ad4..30ce2ba120a1 100644
--- a/drivers/media/platform/omap/Kconfig
+++ b/drivers/media/platform/omap/Kconfig
@@ -14,5 +14,5 @@ config VIDEO_OMAP2_VOUT
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
select FRAME_VECTOR
default n
- ---help---
+ help
V4L2 Display driver support for OMAP2/3 based boards.
diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig
index e3eb8fee2536..2433ec960010 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -17,7 +17,7 @@ config VIDEO_RCAR_VIN
depends on ARCH_RENESAS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- ---help---
+ help
Support for Renesas R-Car Video Input (VIN) driver.
Supports R-Car Gen2 and Gen3 SoCs.
diff --git a/drivers/media/platform/sti/c8sectpfe/Kconfig b/drivers/media/platform/sti/c8sectpfe/Kconfig
index 7420a50572d3..93eaabfd5437 100644
--- a/drivers/media/platform/sti/c8sectpfe/Kconfig
+++ b/drivers/media/platform/sti/c8sectpfe/Kconfig
@@ -12,7 +12,7 @@ config DVB_C8SECTPFE
select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This adds support for DVB front-end cards connected
to TS inputs of STiH407/410 SoC.
diff --git a/drivers/media/platform/vimc/Kconfig b/drivers/media/platform/vimc/Kconfig
index 71c9fe7d3370..1de9bc9aa49b 100644
--- a/drivers/media/platform/vimc/Kconfig
+++ b/drivers/media/platform/vimc/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_VIMC
select VIDEOBUF2_VMALLOC
select VIDEO_V4L2_TPG
default n
- ---help---
+ help
Skeleton driver for Virtual Media Controller
This driver can be compared to the vivid driver for emulating
diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig
index 154de92dd809..4b51d4d6cf93 100644
--- a/drivers/media/platform/vivid/Kconfig
+++ b/drivers/media/platform/vivid/Kconfig
@@ -11,7 +11,7 @@ config VIDEO_VIVID
select VIDEOBUF2_DMA_CONTIG
select VIDEO_V4L2_TPG
default n
- ---help---
+ help
Enables a virtual video driver. This driver emulates a webcam,
TV, S-Video and HDMI capture hardware, including VBI support for
the SDTV inputs. Also video output, VBI output, radio receivers,
@@ -28,7 +28,7 @@ config VIDEO_VIVID_CEC
bool "Enable CEC emulation support"
depends on VIDEO_VIVID
select CEC_CORE
- ---help---
+ help
When selected the vivid module will emulate the optional
HDMI CEC feature.
@@ -36,6 +36,6 @@ config VIDEO_VIVID_MAX_DEVS
int "Maximum number of devices"
depends on VIDEO_VIVID
default "64"
- ---help---
+ help
This allows you to specify the maximum number of devices supported
by the vivid driver.
diff --git a/drivers/media/platform/xilinx/Kconfig b/drivers/media/platform/xilinx/Kconfig
index 74ec8aaa5ae0..a2773ad7c185 100644
--- a/drivers/media/platform/xilinx/Kconfig
+++ b/drivers/media/platform/xilinx/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_XILINX
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- ---help---
+ help
Driver for Xilinx Video IP Pipelines
if VIDEO_XILINX
@@ -14,13 +14,13 @@ config VIDEO_XILINX_TPG
tristate "Xilinx Video Test Pattern Generator"
depends on VIDEO_XILINX
select VIDEO_XILINX_VTC
- ---help---
+ help
Driver for the Xilinx Video Test Pattern Generator
config VIDEO_XILINX_VTC
tristate "Xilinx Video Timing Controller"
depends on VIDEO_XILINX
- ---help---
+ help
Driver for the Xilinx Video Timing Controller
endif #VIDEO_XILINX
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 9b99dfb2d0c6..9cd00f64af32 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@ menuconfig RADIO_ADAPTERS
depends on VIDEO_V4L2
depends on MEDIA_RADIO_SUPPORT
default y
- ---help---
+ help
Say Y here to enable selecting AM/FM radio adapters.
if RADIO_ADAPTERS && VIDEO_V4L2
@@ -29,7 +29,7 @@ config RADIO_SI476X
depends on MFD_SI476X_CORE
depends on SND_SOC
select SND_SOC_SI476X
- ---help---
+ help
Choose Y here if you have this FM radio chip.
In order to control your radio card, you will need to use programs
@@ -43,7 +43,7 @@ config RADIO_SI476X
config USB_MR800
tristate "AverMedia MR 800 USB FM radio support"
depends on USB && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
you must connect the line out connector to a sound card or a
@@ -55,7 +55,7 @@ config USB_MR800
config USB_DSBR
tristate "D-Link/GemTek USB FM radio support"
depends on USB && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
you must connect the line out connector to a sound card or a
@@ -68,7 +68,7 @@ config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
depends on VIDEO_V4L2 && PCI
select RADIO_TEA575X
- ---help---
+ help
Choose Y here if you have this radio card. This card may also be
found as Gemtek PCI FM.
@@ -84,7 +84,7 @@ config RADIO_SHARK
tristate "Griffin radioSHARK USB radio receiver"
depends on USB
select RADIO_TEA575X
- ---help---
+ help
Choose Y here if you have this radio receiver.
There are 2 versions of this device, this driver is for version 1,
@@ -101,7 +101,7 @@ config RADIO_SHARK
config RADIO_SHARK2
tristate "Griffin radioSHARK2 USB radio receiver"
depends on USB
- ---help---
+ help
Choose Y here if you have this radio receiver.
There are 2 versions of this device, this driver is for version 2,
@@ -118,7 +118,7 @@ config RADIO_SHARK2
config USB_KEENE
tristate "Keene FM Transmitter USB support"
depends on USB && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to connect this type of FM transmitter
to your computer's USB port.
@@ -128,7 +128,7 @@ config USB_KEENE
config USB_RAREMONO
tristate "Thanko's Raremono AM/FM/SW radio support"
depends on USB && VIDEO_V4L2
- ---help---
+ help
The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
It is one of the very few or perhaps the only consumer USB radio device
to receive the AM/FM/SW bands.
@@ -142,7 +142,7 @@ config USB_RAREMONO
config USB_MA901
tristate "Masterkit MA901 USB FM radio support"
depends on USB && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
you must connect the line out connector to a sound card or a
@@ -154,7 +154,7 @@ config USB_MA901
config RADIO_TEA5764
tristate "TEA5764 I2C FM radio support"
depends on I2C && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to use the TEA5764 FM chip found in
EZX phones. This FM chip is present in EZX phones from Motorola,
connected to internal pxa I2C bus.
@@ -173,7 +173,7 @@ config RADIO_TEA5764_XTAL
config RADIO_SAA7706H
tristate "SAA7706H Car Radio DSP"
depends on I2C && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to use the SAA7706H Car radio Digital
Signal Processor, found for instance on the Russellville development
board. On the russellville the device is connected to internal
@@ -185,7 +185,7 @@ config RADIO_SAA7706H
config RADIO_TEF6862
tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
depends on I2C && VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to use the TEF6862 Car Radio Enhanced
Selectivity Tuner, found for instance on the Russellville development
board. On the russellville the device is connected to internal
@@ -200,7 +200,7 @@ config RADIO_TIMBERDALE
depends on I2C # for RADIO_SAA7706H
select RADIO_TEF6862
select RADIO_SAA7706H
- ---help---
+ help
This is a kind of umbrella driver for the Radio Tuner and DSP
found behind the Timberdale FPGA on the Russellville board.
Enabling this driver will automatically select the DSP and tuner.
@@ -211,7 +211,7 @@ config RADIO_WL1273
select MFD_CORE
select MFD_WL1273_CORE
select FW_LOADER
- ---help---
+ help
Choose Y here if you have this FM radio chip.
In order to control your radio card, you will need to use programs
@@ -233,7 +233,7 @@ menuconfig V4L_RADIO_ISA_DRIVERS
bool "ISA radio devices"
depends on ISA || COMPILE_TEST
default n
- ---help---
+ help
Say Y here to enable support for these ISA drivers.
if V4L_RADIO_ISA_DRIVERS
@@ -246,7 +246,7 @@ config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
- ---help---
+ help
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -258,7 +258,7 @@ config RADIO_RTRACK
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -290,7 +290,7 @@ config RADIO_RTRACK2
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -314,7 +314,7 @@ config RADIO_AZTECH
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -335,7 +335,7 @@ config RADIO_GEMTEK
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have this FM radio card, and then fill in the
I/O port address and settings below. The following cards either have
GemTek Radio tuner or are rebranded GemTek Radio cards:
@@ -377,7 +377,7 @@ config RADIO_MIROPCM20
depends on ISA_DMA_API && VIDEO_V4L2 && SND
select SND_ISA
select SND_MIRO
- ---help---
+ help
Choose Y here if you have this FM radio card. You also need to enable
the ALSA sound system. This choice automatically selects the ALSA
sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
@@ -390,7 +390,7 @@ config RADIO_SF16FMI
tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
- ---help---
+ help
Choose Y here if you have one of these FM radio cards.
To compile this driver as a module, choose M here: the
@@ -401,7 +401,7 @@ config RADIO_SF16FMR2
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_TEA575X
- ---help---
+ help
Choose Y here if you have one of these FM radio cards.
To compile this driver as a module, choose M here: the
@@ -412,7 +412,7 @@ config RADIO_TERRATEC
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have this FM radio card.
Note: this driver hasn't been tested since a long time due to lack
@@ -451,7 +451,7 @@ config RADIO_TYPHOON
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have one of these FM radio cards, and then fill
in the port address and the frequency used for muting below.
@@ -486,7 +486,7 @@ config RADIO_ZOLTRIX
depends on ISA || COMPILE_TEST
depends on VIDEO_V4L2
select RADIO_ISA
- ---help---
+ help
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig
index 6dbb158cd2a0..21026488de90 100644
--- a/drivers/media/radio/si470x/Kconfig
+++ b/drivers/media/radio/si470x/Kconfig
@@ -1,7 +1,7 @@
config RADIO_SI470X
tristate "Silicon Labs Si470x FM Radio Receiver support"
depends on VIDEO_V4L2
- ---help---
+ help
This is a driver for devices with the Silicon Labs SI470x
chip (either via USB or I2C buses).
@@ -15,7 +15,7 @@ config RADIO_SI470X
config USB_SI470X
tristate "Silicon Labs Si470x FM Radio Receiver support with USB"
depends on USB && RADIO_SI470X
- ---help---
+ help
This is a driver for USB devices with the Silicon Labs SI470x
chip. Currently these devices are known to work:
- 10c4:818a: Silicon Labs USB FM Radio Reference Design
@@ -40,7 +40,7 @@ config USB_SI470X
config I2C_SI470X
tristate "Silicon Labs Si470x FM Radio Receiver support with I2C"
depends on I2C && RADIO_SI470X
- ---help---
+ help
This is a driver for I2C devices with the Silicon Labs SI470x
chip.
diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
index 9c8b887cff75..17567c917554 100644
--- a/drivers/media/radio/si4713/Kconfig
+++ b/drivers/media/radio/si4713/Kconfig
@@ -2,7 +2,7 @@ config USB_SI4713
tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB"
depends on USB && I2C && RADIO_SI4713
select I2C_SI4713
- ---help---
+ help
This is a driver for USB devices with the Silicon Labs SI4713
chip. Currently these devices are known to work.
- 10c4:8244: Silicon Labs FM Transmitter USB device.
@@ -17,7 +17,7 @@ config PLATFORM_SI4713
tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
depends on I2C && RADIO_SI4713
select I2C_SI4713
- ---help---
+ help
This is a driver for I2C devices with the Silicon Labs SI4713
chip.
@@ -30,7 +30,7 @@ config PLATFORM_SI4713
config I2C_SI4713
tristate "Silicon Labs Si4713 FM Radio Transmitter support"
depends on I2C && RADIO_SI4713
- ---help---
+ help
Say Y here if you want support to Si4713 FM Radio Transmitter.
This device can transmit audio through FM. It can transmit
RDS and RBDS signals as well. This module is the v4l2 radio
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 96ce3e5524e0..3fc6ac15c66d 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -2,7 +2,7 @@
menuconfig RC_CORE
tristate "Remote Controller support"
depends on INPUT
- ---help---
+ help
Enable support for Remote Controllers on Linux. This is
needed in order to support several video capture adapters,
standalone IR receivers/transmitters, and RF receivers.
@@ -19,7 +19,7 @@ source "drivers/media/rc/keymaps/Kconfig"
config LIRC
bool "LIRC user interface"
depends on RC_CORE
- ---help---
+ help
Enable this option to enable the Linux Infrared Remote
Control user interface (e.g. /dev/lirc*). This interface
passes raw IR to and from userspace, which is needed for
@@ -48,7 +48,7 @@ config IR_NEC_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have IR with NEC protocol, and
if the IR is decoded in software
@@ -57,7 +57,7 @@ config IR_RC5_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have IR with RC-5 protocol, and
if the IR is decoded in software
@@ -66,7 +66,7 @@ config IR_RC6_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have an infrared remote control which
uses the RC6 protocol, and you need software decoding support.
@@ -75,7 +75,7 @@ config IR_JVC_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have an infrared remote control which
uses the JVC protocol, and you need software decoding support.
@@ -84,7 +84,7 @@ config IR_SONY_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have an infrared remote control which
uses the Sony protocol, and you need software decoding support.
@@ -92,7 +92,7 @@ config IR_SANYO_DECODER
tristate "Enable IR raw decoder for the Sanyo protocol"
depends on RC_CORE
- ---help---
+ help
Enable this option if you have an infrared remote control which
uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
and you need software decoding support.
@@ -101,7 +101,7 @@ config IR_SHARP_DECODER
tristate "Enable IR raw decoder for the Sharp protocol"
depends on RC_CORE
- ---help---
+ help
Enable this option if you have an infrared remote control which
uses the Sharp protocol (Sharp, Denon), and you need software
decoding support.
@@ -111,7 +111,7 @@ config IR_MCE_KBD_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have a Microsoft Remote Keyboard for
Windows Media Center Edition, which you would like to use with
a raw IR receiver in your system.
@@ -121,14 +121,14 @@ config IR_XMP_DECODER
depends on RC_CORE
select BITREVERSE
- ---help---
+ help
Enable this option if you have IR with XMP protocol, and
if the IR is decoded in software
config IR_IMON_DECODER
tristate "Enable IR raw decoder for the iMON protocol"
depends on RC_CORE
- ---help---
+ help
Enable this option if you have iMON PAD or Antec Veris infrared
remote control and you would like to use it with a raw IR
receiver, or if you wish to use an encoder to transmit this IR.
@@ -177,7 +177,7 @@ config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP || COMPILE_TEST
depends on RC_CORE
- ---help---
+ help
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
@@ -203,7 +203,7 @@ config IR_IMON
depends on USB_ARCH_HAS_HCD
depends on RC_CORE
select USB
- ---help---
+ help
Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
IR Receiver and/or LCD/VFD/VGA display.
@@ -215,7 +215,7 @@ config IR_IMON_RAW
depends on USB_ARCH_HAS_HCD
depends on RC_CORE
select USB
- ---help---
+ help
Say Y here if you want to use a SoundGraph iMON IR Receiver,
early raw models.
@@ -227,7 +227,7 @@ config IR_MCEUSB
depends on USB_ARCH_HAS_HCD
depends on RC_CORE
select USB
- ---help---
+ help
Say Y here if you want to use a Windows Media Center Edition
eHome Infrared Transceiver.
@@ -238,7 +238,7 @@ config IR_ITE_CIR
tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
depends on RC_CORE
- ---help---
+ help
Say Y here to enable support for integrated infrared receivers
/transceivers made by ITE Tech Inc. These are found in
several ASUS devices, like the ASUS Digimatrix or the ASUS
@@ -251,7 +251,7 @@ config IR_FINTEK
tristate "Fintek Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
depends on RC_CORE
- ---help---
+ help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Fintek. This chip is found on assorted
Jetway motherboards (and of course, possibly others).
@@ -263,7 +263,7 @@ config IR_MESON
tristate "Amlogic Meson IR remote receiver"
depends on RC_CORE
depends on ARCH_MESON || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use the IR remote receiver available
on Amlogic Meson SoCs.
@@ -274,7 +274,7 @@ config IR_MTK
tristate "Mediatek IR remote receiver"
depends on RC_CORE
depends on ARCH_MEDIATEK || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use the IR remote receiver available
on Mediatek SoCs.
@@ -285,7 +285,7 @@ config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
depends on RC_CORE
- ---help---
+ help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Nuvoton (formerly Winbond). This chip is
found in the ASRock ION 330HT, as well as assorted Intel
@@ -301,7 +301,7 @@ config IR_REDRAT3
select NEW_LEDS
select LEDS_CLASS
select USB
- ---help---
+ help
Say Y here if you want to use a RedRat3 Infrared Transceiver.
To compile this driver as a module, choose M here: the
@@ -311,7 +311,7 @@ config IR_SPI
tristate "SPI connected IR LED"
depends on SPI && LIRC
depends on OF || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use an IR LED connected through SPI bus.
To compile this driver as a module, choose M here: the module will be
@@ -322,7 +322,7 @@ config IR_STREAMZAP
depends on USB_ARCH_HAS_HCD
depends on RC_CORE
select USB
- ---help---
+ help
Say Y here if you want to use a Streamzap PC Remote
Infrared Receiver.
@@ -336,7 +336,7 @@ config IR_WINBOND_CIR
select NEW_LEDS
select LEDS_CLASS
select BITREVERSE
- ---help---
+ help
Say Y here if you want to use the IR remote functionality found
in some Winbond SuperI/O chips. Currently only the WPCD376I
chip is supported (included in some Intel Media series
@@ -350,7 +350,7 @@ config IR_IGORPLUGUSB
depends on USB_ARCH_HAS_HCD
depends on RC_CORE
select USB
- ---help---
+ help
Say Y here if you want to use the IgorPlug-USB IR Receiver by
Igor Cesko. This device is included on the Fit-PC2.
@@ -365,7 +365,7 @@ config IR_IGUANA
depends on USB_ARCH_HAS_HCD
depends on RC_CORE
select USB
- ---help---
+ help
Say Y here if you want to use the IguanaWorks USB IR Transceiver.
Both infrared receive and send are supported. If you want to
change the ID or the pin config, use the user space driver from
@@ -383,7 +383,7 @@ config IR_TTUSBIR
select USB
select NEW_LEDS
select LEDS_CLASS
- ---help---
+ help
Say Y here if you want to use the TechnoTrend USB IR Receiver. The
driver can control the led.
@@ -393,7 +393,7 @@ config IR_TTUSBIR
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
- ---help---
+ help
Say Y or M here if you want to enable support for the IR
transmitter diode built in the Nokia N900 (RX51) device.
@@ -405,7 +405,7 @@ source "drivers/media/rc/img-ir/Kconfig"
config RC_LOOPBACK
tristate "Remote Control Loopback Driver"
depends on RC_CORE
- ---help---
+ help
Say Y here if you want support for the remote control loopback
driver which allows TX data to be sent back as RX data.
This is mostly useful for debugging purposes.
@@ -419,7 +419,7 @@ config IR_GPIO_CIR
tristate "GPIO IR remote control"
depends on RC_CORE
depends on (OF && GPIOLIB) || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use GPIO based IR Receiver.
To compile this driver as a module, choose M here: the module will
@@ -430,7 +430,7 @@ config IR_GPIO_TX
depends on RC_CORE
depends on LIRC
depends on (OF && GPIOLIB) || COMPILE_TEST
- ---help---
+ help
Say Y if you want to a GPIO based IR transmitter. This is a
bit banging driver.
@@ -443,7 +443,7 @@ config IR_PWM_TX
depends on LIRC
depends on PWM
depends on OF || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use a PWM based IR transmitter. This is
more power efficient than the bit banging gpio driver.
@@ -454,7 +454,7 @@ config RC_ST
tristate "ST remote control receiver"
depends on RC_CORE
depends on ARCH_STI || COMPILE_TEST
- ---help---
+ help
Say Y here if you want support for ST remote control driver
which allows both IR and UHF RX.
The driver passes raw pulse and space information to the LIRC decoder.
@@ -465,7 +465,7 @@ config IR_SUNXI
tristate "SUNXI IR remote control"
depends on RC_CORE
depends on ARCH_SUNXI || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use sunXi internal IR Controller
To compile this driver as a module, choose M here: the module will
@@ -474,7 +474,7 @@ config IR_SUNXI
config IR_SERIAL
tristate "Homebrew Serial Port Receiver"
depends on RC_CORE
- ---help---
+ help
Say Y if you want to use Homebrew Serial Port Receivers and
Transceivers.
@@ -484,13 +484,13 @@ config IR_SERIAL
config IR_SERIAL_TRANSMITTER
bool "Serial Port Transmitter"
depends on IR_SERIAL
- ---help---
+ help
Serial Port Transmitter support
config IR_SIR
tristate "Built-in SIR IrDA port"
depends on RC_CORE
- ---help---
+ help
Say Y if you want to use a IrDA SIR port Transceivers.
To compile this driver as a module, choose M here: the module will
@@ -500,7 +500,7 @@ config IR_TANGO
tristate "Sigma Designs SMP86xx IR decoder"
depends on RC_CORE
depends on ARCH_TANGO || COMPILE_TEST
- ---help---
+ help
Adds support for the HW IR decoder embedded on Sigma Designs
Tango-based systems (SMP86xx, SMP87xx).
The HW decoder supports NEC, RC-5, RC-6 IR protocols.
@@ -522,7 +522,7 @@ config IR_ZX
tristate "ZTE ZX IR remote control"
depends on RC_CORE
depends on ARCH_ZX || COMPILE_TEST
- ---help---
+ help
Say Y if you want to use the IR remote control available
on ZTE ZX family SoCs.
diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig
index 767423bbbdd0..f459096d8e9c 100644
--- a/drivers/media/rc/keymaps/Kconfig
+++ b/drivers/media/rc/keymaps/Kconfig
@@ -3,7 +3,7 @@ config RC_MAP
depends on RC_CORE
default y
- ---help---
+ help
This option enables the compilation of lots of Remote
Controller tables. They are short tables, but if you
don't use a remote controller, or prefer to load the
diff --git a/drivers/media/spi/Kconfig b/drivers/media/spi/Kconfig
index b07ac86fc53c..df169ecf0c27 100644
--- a/drivers/media/spi/Kconfig
+++ b/drivers/media/spi/Kconfig
@@ -6,7 +6,7 @@ menu "SPI helper chips"
config VIDEO_GS1662
tristate "Gennum Serializers video"
depends on SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- ---help---
+ help
Enable the GS1662 driver which serializes video streams.
endmenu
diff --git a/drivers/media/usb/airspy/Kconfig b/drivers/media/usb/airspy/Kconfig
index 10b204cf4dbc..67578511bb9a 100644
--- a/drivers/media/usb/airspy/Kconfig
+++ b/drivers/media/usb/airspy/Kconfig
@@ -2,7 +2,7 @@ config USB_AIRSPY
tristate "AirSpy"
depends on VIDEO_V4L2
select VIDEOBUF2_VMALLOC
- ---help---
+ help
This is a video4linux2 driver for AirSpy SDR device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/au0828/Kconfig b/drivers/media/usb/au0828/Kconfig
index 65fc067eb864..ab4092bdff69 100644
--- a/drivers/media/usb/au0828/Kconfig
+++ b/drivers/media/usb/au0828/Kconfig
@@ -9,7 +9,7 @@ config VIDEO_AU0828
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a hybrid analog/digital tv capture driver for
Auvitek's AU0828 USB device.
@@ -23,7 +23,7 @@ config VIDEO_AU0828_V4L2
select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TUNER
default y
- ---help---
+ help
This is a video4linux driver for Auvitek's USB device.
Choose Y here to include support for v4l2 analog video
@@ -34,5 +34,5 @@ config VIDEO_AU0828_RC
depends on RC_CORE
depends on !(RC_CORE=m && VIDEO_AU0828=y)
depends on VIDEO_AU0828
- ---help---
+ help
Enables Remote Controller support on au0828 driver.
diff --git a/drivers/media/usb/cpia2/Kconfig b/drivers/media/usb/cpia2/Kconfig
index 66e9283f5993..7029a04f3ffd 100644
--- a/drivers/media/usb/cpia2/Kconfig
+++ b/drivers/media/usb/cpia2/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_CPIA2
tristate "CPiA2 Video For Linux"
depends on VIDEO_DEV && USB && VIDEO_V4L2
- ---help---
+ help
This is the video4linux driver for cameras based on Vision's CPiA2
(Colour Processor Interface ASIC), such as the Digital Blue QX5
Microscope. If you have one of these cameras, say Y here
diff --git a/drivers/media/usb/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig
index 9e5b3e7c3ef5..9262d0d7439a 100644
--- a/drivers/media/usb/cx231xx/Kconfig
+++ b/drivers/media/usb/cx231xx/Kconfig
@@ -7,7 +7,7 @@ config VIDEO_CX231XX
select VIDEO_CX25840
select VIDEO_CX2341X
- ---help---
+ help
This is a video4linux driver for Conexant 231xx USB based TV cards.
To compile this driver as a module, choose M here: the
@@ -18,7 +18,7 @@ config VIDEO_CX231XX_RC
depends on RC_CORE=y || RC_CORE=VIDEO_CX231XX
depends on VIDEO_CX231XX
default y
- ---help---
+ help
cx231xx hardware has a builtin RX/TX support. However, a few
designs opted to not use it, but, instead, some other hardware.
This module enables the usage of those other hardware, like the
@@ -31,7 +31,7 @@ config VIDEO_CX231XX_ALSA
depends on VIDEO_CX231XX && SND
select SND_PCM
- ---help---
+ help
This is an ALSA driver for Cx231xx USB based TV cards.
To compile this driver as a module, choose M here: the
@@ -52,6 +52,6 @@ config VIDEO_CX231XX_DVB
select DVB_MN88473 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This adds support for DVB cards based on the
Conexant cx231xx chips.
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index 451e076525d3..639da7e24066 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -13,7 +13,7 @@ config VIDEO_EM28XX_V4L2
select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
- ---help---
+ help
This is a video4linux driver for Empia 28xx based TV cards.
To compile this driver as a module, choose M here: the
@@ -23,7 +23,7 @@ config VIDEO_EM28XX_ALSA
depends on VIDEO_EM28XX && SND
select SND_PCM
tristate "Empia EM28xx ALSA audio module"
- ---help---
+ help
This is an ALSA driver for some Empia 28xx based TV cards.
This is not required for em2800/em2820/em2821 boards. However,
@@ -66,7 +66,7 @@ config VIDEO_EM28XX_DVB
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This adds support for DVB cards based on the
Empiatech em28xx chips.
@@ -76,5 +76,5 @@ config VIDEO_EM28XX_RC
depends on VIDEO_EM28XX
depends on !(RC_CORE=m && VIDEO_EM28XX=y)
default VIDEO_EM28XX
- ---help---
+ help
Enables Remote Controller support on em28xx driver.
diff --git a/drivers/media/usb/go7007/Kconfig b/drivers/media/usb/go7007/Kconfig
index af1d02430931..beab257c092f 100644
--- a/drivers/media/usb/go7007/Kconfig
+++ b/drivers/media/usb/go7007/Kconfig
@@ -13,7 +13,7 @@ config VIDEO_GO7007
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip.
@@ -23,7 +23,7 @@ config VIDEO_GO7007
config VIDEO_GO7007_USB
tristate "WIS GO7007 USB support"
depends on VIDEO_GO7007 && USB
- ---help---
+ help
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip over USB.
@@ -34,7 +34,7 @@ config VIDEO_GO7007_LOADER
tristate "WIS GO7007 Loader support"
depends on VIDEO_GO7007
default y
- ---help---
+ help
This is a go7007 firmware loader driver for the WIS GO7007
MPEG encoder chip over USB.
@@ -44,7 +44,7 @@ config VIDEO_GO7007_LOADER
config VIDEO_GO7007_USB_S2250_BOARD
tristate "Sensoray 2250/2251 support"
depends on VIDEO_GO7007_USB && USB
- ---help---
+ help
This is a video4linux driver for the Sensoray 2250/2251 device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig
index 088566e88467..0e6f36cb46e6 100644
--- a/drivers/media/usb/gspca/Kconfig
+++ b/drivers/media/usb/gspca/Kconfig
@@ -4,7 +4,7 @@ menuconfig USB_GSPCA
depends on INPUT || INPUT=n
select VIDEOBUF2_VMALLOC
default m
- ---help---
+ help
Say Y here if you want to enable selecting webcams based
on the GSPCA framework.
diff --git a/drivers/media/usb/hackrf/Kconfig b/drivers/media/usb/hackrf/Kconfig
index 937e6f5c1e8e..072e186018f5 100644
--- a/drivers/media/usb/hackrf/Kconfig
+++ b/drivers/media/usb/hackrf/Kconfig
@@ -2,7 +2,7 @@ config USB_HACKRF
tristate "HackRF"
depends on VIDEO_V4L2
select VIDEOBUF2_VMALLOC
- ---help---
+ help
This is a video4linux2 driver for HackRF SDR device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/hdpvr/Kconfig b/drivers/media/usb/hdpvr/Kconfig
index d73d9a1952b4..9e78c0c32651 100644
--- a/drivers/media/usb/hdpvr/Kconfig
+++ b/drivers/media/usb/hdpvr/Kconfig
@@ -2,7 +2,7 @@
config VIDEO_HDPVR
tristate "Hauppauge HD PVR support"
depends on VIDEO_DEV && VIDEO_V4L2
- ---help---
+ help
This is a video4linux driver for Hauppauge's HD PVR USB device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig
index 18ead44824ba..11f1b75d3efd 100644
--- a/drivers/media/usb/pulse8-cec/Kconfig
+++ b/drivers/media/usb/pulse8-cec/Kconfig
@@ -4,7 +4,7 @@ config USB_PULSE8_CEC
select CEC_CORE
select SERIO
select SERIO_SERPORT
- ---help---
+ help
This is a cec driver for the Pulse Eight HDMI CEC device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig
index 1ad913fc30bf..ac6612cf1bec 100644
--- a/drivers/media/usb/pvrusb2/Kconfig
+++ b/drivers/media/usb/pvrusb2/Kconfig
@@ -9,7 +9,7 @@ config VIDEO_PVRUSB2
select VIDEO_MSP3400
select VIDEO_WM8775
select VIDEO_CS53L32A
- ---help---
+ help
This is a video4linux driver for Conexant 23416 based
usb2 personal video recorder devices.
@@ -20,7 +20,7 @@ config VIDEO_PVRUSB2_SYSFS
bool "pvrusb2 sysfs support"
default y
depends on VIDEO_PVRUSB2 && SYSFS
- ---help---
+ help
This option enables the operation of a sysfs based
interface for query and control of the pvrusb2 driver.
@@ -43,7 +43,7 @@ config VIDEO_PVRUSB2_DVB
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
This option enables a DVB interface for the pvrusb2 driver.
If your device does not support digital television, this
feature will have no affect on the driver's operation.
@@ -53,7 +53,7 @@ config VIDEO_PVRUSB2_DVB
config VIDEO_PVRUSB2_DEBUGIFC
bool "pvrusb2 debug interface"
depends on VIDEO_PVRUSB2_SYSFS
- ---help---
+ help
This option enables the inclusion of a debug interface
in the pvrusb2 driver, hosted through sysfs.
diff --git a/drivers/media/usb/pwc/Kconfig b/drivers/media/usb/pwc/Kconfig
index d63d0a850035..5f6d91edca41 100644
--- a/drivers/media/usb/pwc/Kconfig
+++ b/drivers/media/usb/pwc/Kconfig
@@ -2,7 +2,7 @@ config USB_PWC
tristate "USB Philips Cameras"
depends on VIDEO_V4L2
select VIDEOBUF2_VMALLOC
- ---help---
+ help
Say Y or M here if you want to use one of these Philips & OEM
webcams:
* Philips PCA645, PCA646
@@ -41,7 +41,7 @@ config USB_PWC_INPUT_EVDEV
bool "USB Philips Cameras input events device support"
default y
depends on USB_PWC && (USB_PWC=INPUT || INPUT=y)
- ---help---
+ help
This option makes USB Philips cameras register the snapshot button as
an input device to report button events.
diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig
index 030ef01b1ff0..6b00be618db8 100644
--- a/drivers/media/usb/rainshadow-cec/Kconfig
+++ b/drivers/media/usb/rainshadow-cec/Kconfig
@@ -4,7 +4,7 @@ config USB_RAINSHADOW_CEC
select CEC_CORE
select SERIO
select SERIO_SERPORT
- ---help---
+ help
This is a cec driver for the RainShadow Tech HDMI CEC device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/siano/Kconfig b/drivers/media/usb/siano/Kconfig
index d37b742d4f7a..cc5e5aa3c93a 100644
--- a/drivers/media/usb/siano/Kconfig
+++ b/drivers/media/usb/siano/Kconfig
@@ -8,6 +8,6 @@ config SMS_USB_DRV
depends on !RC_CORE || RC_CORE
select MEDIA_COMMON_OPTIONS
select SMS_SIANO_MDTV
- ---help---
+ help
Choose if you would like to have Siano's support for USB interface
diff --git a/drivers/media/usb/stk1160/Kconfig b/drivers/media/usb/stk1160/Kconfig
index 425ed00e2599..03426e4437ea 100644
--- a/drivers/media/usb/stk1160/Kconfig
+++ b/drivers/media/usb/stk1160/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_STK1160_COMMON
tristate "STK1160 USB video capture support"
depends on VIDEO_DEV && I2C
- ---help---
+ help
This is a video4linux driver for STK1160 based video capture devices.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/stkwebcam/Kconfig b/drivers/media/usb/stkwebcam/Kconfig
index a6a00aa4fce6..ea9e04b3caaf 100644
--- a/drivers/media/usb/stkwebcam/Kconfig
+++ b/drivers/media/usb/stkwebcam/Kconfig
@@ -1,7 +1,7 @@
config USB_STKWEBCAM
tristate "USB Syntek DC1125 Camera support"
depends on VIDEO_V4L2
- ---help---
+ help
Say Y here if you want to use this type of camera.
Supported devices are typically found in some Asus laptops,
with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
diff --git a/drivers/media/usb/tm6000/Kconfig b/drivers/media/usb/tm6000/Kconfig
index a43b77abd931..321ae691f4d9 100644
--- a/drivers/media/usb/tm6000/Kconfig
+++ b/drivers/media/usb/tm6000/Kconfig
@@ -18,7 +18,7 @@ config VIDEO_TM6000_ALSA
tristate "TV Master TM5600/6000/6010 audio support"
depends on VIDEO_TM6000 && SND
select SND_PCM
- ---help---
+ help
This is a video4linux driver for direct (DMA) audio for
TM5600/TM6000/TM6010 USB Devices.
@@ -29,5 +29,5 @@ config VIDEO_TM6000_DVB
tristate "DVB Support for tm6000 based TV cards"
depends on VIDEO_TM6000 && DVB_CORE && USB
select DVB_ZL10353
- ---help---
+ help
This adds support for DVB cards based on the tm5600/tm6000 chip.
diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig
index 14a0941fa0d0..2b4ac0848469 100644
--- a/drivers/media/usb/usbtv/Kconfig
+++ b/drivers/media/usb/usbtv/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_USBTV
select SND_PCM
select VIDEOBUF2_VMALLOC
- ---help---
+ help
This is a video4linux2 driver for USBTV007 based video capture devices.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/usbvision/Kconfig b/drivers/media/usb/usbvision/Kconfig
index 6b6afc5d8f7e..7aa080cb9884 100644
--- a/drivers/media/usb/usbvision/Kconfig
+++ b/drivers/media/usb/usbvision/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_USBVISION
depends on I2C && VIDEO_V4L2
select VIDEO_TUNER
select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
- ---help---
+ help
There are more than 50 different USB video devices based on
NT1003/1004/1005 USB Bridges. This driver enables using those
devices.
diff --git a/drivers/media/usb/uvc/Kconfig b/drivers/media/usb/uvc/Kconfig
index 6ed85efabcaa..94937d0cc2e3 100644
--- a/drivers/media/usb/uvc/Kconfig
+++ b/drivers/media/usb/uvc/Kconfig
@@ -2,7 +2,7 @@ config USB_VIDEO_CLASS
tristate "USB Video Class (UVC)"
depends on VIDEO_V4L2
select VIDEOBUF2_VMALLOC
- ---help---
+ help
Support for the USB Video Class (UVC). Currently only video
input devices, such as webcams, are supported.
@@ -13,7 +13,7 @@ config USB_VIDEO_CLASS_INPUT_EVDEV
default y
depends on USB_VIDEO_CLASS
depends on USB_VIDEO_CLASS=INPUT || INPUT=y
- ---help---
+ help
This option makes USB Video Class devices register an input device
to report button events.
diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig
index ac429bca70e8..979b1d4f3f68 100644
--- a/drivers/media/usb/zr364xx/Kconfig
+++ b/drivers/media/usb/zr364xx/Kconfig
@@ -3,7 +3,7 @@ config USB_ZR364XX
depends on VIDEO_V4L2
select VIDEOBUF_GEN
select VIDEOBUF_VMALLOC
- ---help---
+ help
Say Y here if you want to connect this type of camera to your
computer's USB port.
See <file:Documentation/media/v4l-drivers/zr364xx.rst> for more info
diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
index c0940f5c69b4..8402096f7796 100644
--- a/drivers/media/v4l2-core/Kconfig
+++ b/drivers/media/v4l2-core/Kconfig
@@ -13,7 +13,7 @@ config VIDEO_V4L2
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality on V4L2 drivers"
default n
- ---help---
+ help
Say Y here to enable advanced debugging functionality on some
V4L devices.
In doubt, say N.
@@ -21,7 +21,7 @@ config VIDEO_ADV_DEBUG
config VIDEO_FIXED_MINOR_RANGES
bool "Enable old-style fixed minor ranges on drivers/video devices"
default n
- ---help---
+ help
Say Y here to enable the old-style fixed-range minor assignments.
Only useful if you rely on the old behavior and use mknod instead of udev.
@@ -33,7 +33,7 @@ config VIDEO_PCI_SKELETON
depends on SAMPLES
depends on VIDEO_V4L2 && VIDEOBUF2_CORE
depends on VIDEOBUF2_MEMOPS && VIDEOBUF2_DMA_CONTIG
- ---help---
+ help
Enable build of the skeleton PCI driver, used as a reference
when developing new drivers.
@@ -51,7 +51,7 @@ config V4L2_FLASH_LED_CLASS
tristate "V4L2 flash API for LED flash class devices"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on LEDS_CLASS_FLASH
- ---help---
+ help
Say Y here to enable V4L2 flash API support for LED flash
class drivers.