diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-23 14:39:09 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-23 14:39:09 -0700 |
| commit | e317234975cb7463b8ca21a93bb6862d9dcf113f (patch) | |
| tree | 4446fa3a21364f3cba23a22aa2a94027f169d8df /drivers/media | |
| parent | f37ab0fba271e43edab0e3ae9fe644fcda455402 (diff) | |
| parent | 7483d45f0aee3afc0646d185cabd4af9f6cab58c (diff) | |
| download | linux-e317234975cb7463b8ca21a93bb6862d9dcf113f.tar.bz2 | |
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- V4L2 API additions to better support JPEG compression control
- media API additions to properly support MPEG decoders
- V4L2 API additions for image crop/scaling
- a few other V4L2 API DocBook fixes/improvements
- two new DVB frontend drivers: m88rs2000 and rtl2830
- two new DVB drivers: az6007 and rtl28xxu
- a framework for ISA drivers, that removed lots of common code found
at the ISA radio drivers
- a new FM transmitter driver (radio-keene)
- a GPIO-based IR receiver driver
- a new sensor driver: mt9m032
- some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
vs6624
- several new board additions, driver fixes, improvements and cleanups.
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
[media] update CARDLIST.em28xx
[media] partially reverts changeset fa5527c
[media] stb0899: fix the limits for signal strength values
[media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
[media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
[media] -EINVAL -> -ENOTTY
[media] gspca - sn9c20x: Cleanup source
[media] gspca - sn9c20x: Simplify register write for capture start/stop
[media] gspca - sn9c20x: Add automatic JPEG compression mechanism
[media] gspca - sn9c20x: Greater delay in case of sensor no response
[media] gspca - sn9c20x: Optimize the code of write sequences
[media] gspca - sn9c20x: Add the JPEG compression quality control
[media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
[media] gspca - sn9c20x: Propagate USB errors to higher level
[media] gspca - sn9c20x: Use the new video control mechanism
[media] gspca - sn9c20x: Fix loss of frame start
[media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
[media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
[media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
[media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
...
Diffstat (limited to 'drivers/media')
249 files changed, 16874 insertions, 6652 deletions
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile index 8295854ab94b..f80407eb8998 100644 --- a/drivers/media/common/tuners/Makefile +++ b/drivers/media/common/tuners/Makefile @@ -29,5 +29,5 @@ obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c index cb2c98fbad1b..ba84936aafd6 100644 --- a/drivers/media/common/tuners/max2165.c +++ b/drivers/media/common/tuners/max2165.c @@ -168,7 +168,7 @@ int fixpt_div32(u32 dividend, u32 divisor, u32 *quotient, u32 *fraction) int i; if (0 == divisor) - return -1; + return -EINVAL; q = dividend / divisor; remainder = dividend - q * divisor; @@ -194,10 +194,13 @@ static int max2165_set_rf(struct max2165_priv *priv, u32 freq) u8 tf_ntch; u32 t; u32 quotient, fraction; + int ret; /* Set PLL divider according to RF frequency */ - fixpt_div32(freq / 1000, priv->config->osc_clk * 1000, - "ient, &fraction); + ret = fixpt_div32(freq / 1000, priv->config->osc_clk * 1000, + "ient, &fraction); + if (ret != 0) + return ret; /* 20-bit fraction */ fraction >>= 12; diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/common/tuners/mt2063.c index c89af3cd5eba..0ed9091ff48e 100644 --- a/drivers/media/common/tuners/mt2063.c +++ b/drivers/media/common/tuners/mt2063.c @@ -350,7 +350,7 @@ static int MT2063_Sleep(struct dvb_frontend *fe) /* * ToDo: Add code here to implement a OS blocking */ - msleep(10); + msleep(100); return 0; } @@ -2226,7 +2226,7 @@ static struct dvb_tuner_ops mt2063_ops = { .info = { .name = "MT2063 Silicon Tuner", .frequency_min = 45000000, - .frequency_max = 850000000, + .frequency_max = 865000000, .frequency_step = 0, }, diff --git a/drivers/media/common/tuners/mt2063.h b/drivers/media/common/tuners/mt2063.h index 62d0e8ec4e99..3f5cfd93713f 100644 --- a/drivers/media/common/tuners/mt2063.h +++ b/drivers/media/common/tuners/mt2063.h @@ -23,10 +23,6 @@ static inline struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe, return NULL; } -int mt2063_setTune(struct dvb_frontend *fe, u32 f_in, - u32 bw_in, - enum MTTune_atv_standard tv_type); - /* FIXME: Should use the standard DVB attachment interfaces */ unsigned int tuner_MT2063_SoftwareShutdown(struct dvb_frontend *fe); unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe); diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index e13683bab6b3..2da4440c16ee 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1868,6 +1868,10 @@ struct tunertype tuners[] = { .params = tuner_tena_tnf_5337_params, .count = ARRAY_SIZE(tuner_tena_tnf_5337_params), }, + [TUNER_XC5000C] = { /* Xceive 5000C */ + .name = "Xceive 5000C tuner", + /* see xc5000.c for details */ + }, }; EXPORT_SYMBOL(tuners); diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 296df05b8cda..7f98984e4fad 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -49,9 +49,6 @@ static LIST_HEAD(hybrid_tuner_instance_list); #define dprintk(level, fmt, arg...) if (debug >= level) \ printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) -#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.6.114.fw" -#define XC5000_DEFAULT_FIRMWARE_SIZE 12401 - struct xc5000_priv { struct tuner_i2c_props i2c_props; struct list_head hybrid_tuner_instance_list; @@ -62,6 +59,8 @@ struct xc5000_priv { u8 video_standard; u8 rf_mode; u8 radio_input; + + int chip_id; }; /* Misc Defines */ @@ -204,6 +203,33 @@ static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"FM Radio-INPUT1_MONO", 0x0278, 0x9002} }; + +struct xc5000_fw_cfg { + char *name; + u16 size; +}; + +static const struct xc5000_fw_cfg xc5000a_1_6_114 = { + .name = "dvb-fe-xc5000-1.6.114.fw", + .size = 12401, +}; + +static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = { + .name = "dvb-fe-xc5000c-41.024.5-31875.fw", + .size = 16503, +}; + +static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) +{ + switch (chip_id) { + default: + case XC5000A: + return &xc5000a_1_6_114; + case XC5000C: + return &xc5000c_41_024_5_31875; + } +} + static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val); @@ -552,12 +578,14 @@ static int xc5000_fwupload(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; const struct firmware *fw; int ret; + const struct xc5000_fw_cfg *desired_fw = + xc5000_assign_firmware(priv->chip_id); /* request the firmware, this will block and timeout */ printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", - XC5000_DEFAULT_FIRMWARE); + desired_fw->name); - ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, + ret = request_firmware(&fw, desired_fw->name, priv->i2c_props.adap->dev.parent); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); @@ -569,7 +597,7 @@ static int xc5000_fwupload(struct dvb_frontend *fe) ret = XC_RESULT_SUCCESS; } - if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { + if (fw->size != desired_fw->size) { printk(KERN_ERR "xc5000: firmware incorrect size\n"); ret = XC_RESULT_RESET_FAILURE; } else { @@ -1139,6 +1167,13 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, if (priv->radio_input == 0) priv->radio_input = cfg->radio_input; + /* don't override chip id if it's already been set + unless explicitly specified */ + if ((priv->chip_id == 0) || (cfg->chip_id)) + /* use default chip id if none specified, set to 0 so + it can be overridden if this is a hybrid driver */ + priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0; + /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index e2957451b532..3396f8e02b40 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -27,10 +27,15 @@ struct dvb_frontend; struct i2c_adapter; +#define XC5000A 1 +#define XC5000C 2 + struct xc5000_config { u8 i2c_address; u32 if_khz; u8 radio_input; + + int chip_id; }; /* xc5000 callback command */ diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c index ce4f85849e7b..d88c4aa7d24d 100644 --- a/drivers/media/dvb/ddbridge/ddbridge-core.c +++ b/drivers/media/dvb/ddbridge/ddbridge-core.c @@ -578,6 +578,7 @@ static int demod_attach_drxk(struct ddb_input *input) struct drxk_config config; memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; config.adr = 0x29 + (input->nr & 1); fe = input->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/dvb/ddbridge/ddbridge.h index 6d14893218f4..8b1b41d2a52d 100644 --- a/drivers/media/dvb/ddbridge/ddbridge.h +++ b/drivers/media/dvb/ddbridge/ddbridge.h @@ -32,8 +32,6 @@ #include <asm/dma.h> #include <linux/dvb/frontend.h> #include <linux/dvb/ca.h> -#include <linux/dvb/video.h> -#include <linux/dvb/audio.h> #include <linux/socket.h> #include "dmxdev.h" diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index fbbe545a74cb..4555baa383b2 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -655,6 +655,8 @@ restart: dprintk("%s: Retune requested, FESTATE_RETUNE\n", __func__); re_tune = true; fepriv->state = FESTATE_TUNED; + } else { + re_tune = false; } if (fe->ops.tune) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 9f203c6767a6..63bf45679f98 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -361,6 +361,14 @@ config DVB_USB_EC168 help Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. +config DVB_USB_AZ6007 + tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_DRXK if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE + help + Say Y here to support theAfatech AF9005 based DVB-T/DVB-C receivers. + config DVB_USB_AZ6027 tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" depends on DVB_USB @@ -378,6 +386,7 @@ config DVB_USB_LME2510 select DVB_IX2505V if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_M88RS2000 if !DVB_FE_CUSTOMISE help Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 . @@ -403,3 +412,13 @@ config DVB_USB_MXL111SF select VIDEO_TVEEPROM help Say Y here to support the MxL111SF USB2.0 DTV receiver. + +config DVB_USB_RTL28XXU + tristate "Realtek RTL28xxU DVB USB support" + depends on DVB_USB && EXPERIMENTAL + select DVB_RTL2830 + select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE + help + Say Y here to support the Realtek RTL28xxU DVB USB receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 26c8b9e57050..b76acb5387e6 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -54,7 +54,6 @@ obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o dvb-usb-opera-objs = opera1.o obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o - dvb-usb-af9005-objs = af9005.o af9005-fe.o obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o @@ -88,6 +87,9 @@ obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o dvb-usb-ec168-objs = ec168.o obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o +dvb-usb-az6007-objs = az6007.o +obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o + dvb-usb-az6027-objs = az6027.o obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o @@ -105,8 +107,12 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o -ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +dvb-usb-rtl28xxu-objs = rtl28xxu.o +obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o + +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/ # due to tuner-xc3028 -ccflags-y += -Idrivers/media/common/tuners -EXTRA_CFLAGS += -Idrivers/media/dvb/ttpci +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/ttpci diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 282a43d648df..7e70ea50ef26 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1164,6 +1164,41 @@ static int af9015_af9013_sleep(struct dvb_frontend *fe) return ret; } +/* override tuner callbacks for resource locking */ +static int af9015_tuner_init(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->tuner_init[adap->id](fe); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + +/* override tuner callbacks for resource locking */ +static int af9015_tuner_sleep(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->tuner_sleep[adap->id](fe); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + + static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) { int ret; @@ -1283,6 +1318,7 @@ static struct mxl5007t_config af9015_mxl5007t_config = { static int af9015_tuner_attach(struct dvb_usb_adapter *adap) { int ret; + struct af9015_state *state = adap->dev->priv; deb_info("%s:\n", __func__); switch (af9015_af9013_config[adap->id].tuner) { @@ -1340,6 +1376,19 @@ static int af9015_tuner_attach(struct dvb_usb_adapter *adap) err("Unknown tuner id:%d", af9015_af9013_config[adap->id].tuner); } + + if (adap->fe_adap[0].fe->ops.tuner_ops.init) { + state->tuner_init[adap->id] = + adap->fe_adap[0].fe->ops.tuner_ops.init; + adap->fe_adap[0].fe->ops.tuner_ops.init = af9015_tuner_init; + } + + if (adap->fe_adap[0].fe->ops.tuner_ops.sleep) { + state->tuner_sleep[adap->id] = + adap->fe_adap[0].fe->ops.tuner_ops.sleep; + adap->fe_adap[0].fe->ops.tuner_ops.sleep = af9015_tuner_sleep; + } + return ret; } diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index f619063fa72f..2f68419e899b 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -108,6 +108,8 @@ struct af9015_state { int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status); int (*init[2]) (struct dvb_frontend *fe); int (*sleep[2]) (struct dvb_frontend *fe); + int (*tuner_init[2]) (struct dvb_frontend *fe); + int (*tuner_sleep[2]) (struct dvb_frontend *fe); }; struct af9015_config { diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index cf0c318d6989..03c28655af1b 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -58,7 +58,7 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) { struct anysee_state *state = d->priv; - int act_len, ret; + int act_len, ret, i; u8 buf[64]; memcpy(&buf[0], sbuf, slen); @@ -73,26 +73,52 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, /* We need receive one message more after dvb_usb_generic_rw due to weird transaction flow, which is 1 x send + 2 x receive. */ ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); - if (!ret) { + if (ret) + goto error_unlock; + + /* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32 + * (EPIPE, Broken pipe). Function supports currently msleep() as a + * parameter but I would not like to use it, since according to + * Documentation/timers/timers-howto.txt it should not be used such + * short, under < 20ms, sleeps. Repeating failed message would be + * better choice as not to add unwanted delays... + * Fixing that correctly is one of those or both; + * 1) use repeat if possible + * 2) add suitable delay + */ + + /* get answer, retry few times if error returned */ + for (i = 0; i < 3; i++) { /* receive 2nd answer */ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), &act_len, 2000); - if (ret) - err("%s: recv bulk message failed: %d", __func__, ret); - else { + + if (ret) { + deb_info("%s: recv bulk message failed: %d", + __func__, ret); + } else { deb_xfer("<<< "); debug_dump(buf, rlen, deb_xfer); if (buf[63] != 0x4f) deb_info("%s: cmd failed\n", __func__); + + break; } } + if (ret) { + /* all retries failed, it is fatal */ + err("%s: recv bulk message failed: %d", __func__, ret); + goto error_unlock; + } + /* read request, copy returned data to return buf */ - if (!ret && rbuf && rlen) + if (rbuf && rlen) memcpy(rbuf, buf, rlen); +error_unlock: mutex_unlock(&anysee_usb_mutex); return ret; diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c new file mode 100644 index 000000000000..4008b9c50fbd --- /dev/null +++ b/drivers/media/dvb/dvb-usb/az6007.c @@ -0,0 +1,957 @@ +/* + * Driver for AzureWave 6007 DVB-C/T USB2.0 and clones + * + * Copyright (c) Henry Wang <Henry.wang@AzureWave.com> + * + * This driver was made publicly available by Terratec, at: + * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz + * The original driver's license is GPL, as declared with MODULE_LICENSE() + * + * Copyright (c) 2010-2011 Mauro Carvalho Chehab <mchehab@redhat.com> + * Driver modified by in order to work with upstream drxk driver, and + * tons of bugs got fixed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation under version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "drxk.h" +#include "mt2063.h" +#include "dvb_ca_en50221.h" + +#define DVB_USB_LOG_PREFIX "az6007" +#include "dvb-usb.h" + +/* debug */ +int dvb_usb_az6007_debug; +module_param_named(debug, dvb_usb_az6007_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." + DVB_USB_DEBUG_STATUS); + +#define deb_info(args...) dprintk(dvb_usb_az6007_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_az6007_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_az6007_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_az6007_debug, 0x08, args) + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* Known requests (Cypress FX2 firmware + az6007 "private" ones*/ + +#define FX2_OED 0xb5 +#define AZ6007_READ_DATA 0xb7 +#define AZ6007_I2C_RD 0xb9 +#define AZ6007_POWER 0xbc +#define AZ6007_I2C_WR 0xbd +#define FX2_SCON1 0xc0 +#define AZ6007_TS_THROUGH 0xc7 +#define AZ6007_READ_IR 0xb4 + +struct az6007_device_state { + struct mutex mutex; + struct mutex ca_mutex; + struct dvb_ca_en50221 ca; + unsigned warm:1; + int (*gate_ctrl) (struct dvb_frontend *, int); + unsigned char data[4096]; +}; + +static struct drxk_config terratec_h7_drxk = { + .adr = 0x29, + .parallel_ts = true, + .dynamic_clk = true, + .single_master = true, + .enable_merr_cfg = true, + .no_i2c_bridge = false, + .chunk_size = 64, + .mpeg_out_clk_strength = 0x02, + .microcode_name = "dvb-usb-terratec-h7-drxk.fw", +}; + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->sec_priv; + struct az6007_device_state *st; + int status = 0; + + deb_info("%s: %s\n", __func__, enable ? "enable" : "disable"); + + if (!adap) + return -EINVAL; + + st = adap->dev->priv; + + if (!st) + return -EINVAL; + + if (enable) + status = st->gate_ctrl(fe, 1); + else + status = st->gate_ctrl(fe, 0); + + return status; +} + +static struct mt2063_config az6007_mt2063_config = { + .tuner_address = 0x60, + .refclock = 36125000, +}; + +static int __az6007_read(struct usb_device *udev, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + ret = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, b, blen, 5000); + if (ret < 0) { + warn("usb read operation failed. (%d)", ret); + return -EIO; + } + + deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, + index); + debug_dump(b, blen, deb_xfer); + + return ret; +} + +static int az6007_read(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct az6007_device_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&st->mutex) < 0) + return -EAGAIN; + + ret = __az6007_read(d->udev, req, value, index, b, blen); + + mutex_unlock(&st->mutex); + + return ret; +} + +static int __az6007_write(struct usb_device *udev, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, + index); + debug_dump(b, blen, deb_xfer); + + if (blen > 64) { + err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", + blen); + return -EOPNOTSUPP; + } + + ret = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value, index, b, blen, 5000); + if (ret != blen) { + err("usb write operation failed. (%d)", ret); + return -EIO; + } + + return 0; +} + +static int az6007_write(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct az6007_device_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&st->mutex) < 0) + return -EAGAIN; + + ret = __az6007_write(d->udev, req, value, index, b, blen); + + mutex_unlock(&st->mutex); + + return ret; +} + +static int az6007_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dvb_usb_device *d = adap->dev; + + deb_info("%s: %s", __func__, onoff ? "enable" : "disable"); + + return az6007_write(d, 0xbc, onoff, 0, NULL, 0); +} + +/* remote control stuff (does not work with my box) */ +static int az6007_rc_query(struct dvb_usb_device *d) +{ + struct az6007_device_state *st = d->priv; + unsigned code = 0; + + az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10); + + if (st->data[1] == 0x44) + return 0; + + if ((st->data[1] ^ st->data[2]) == 0xff) + code = st->data[1]; + else + code = st->data[1] << 8 | st->data[2]; + + if ((st->data[3] ^ st->data[4]) == 0xff) + code = code << 8 | st->data[3]; + else + code = code << 16 | st->data[3] << 8 | st->data[4]; + + rc_keydown(d->rc_dev, code, st->data[5]); + + return 0; +} + +static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + if (slot != 0) + return -EINVAL; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); + + req = 0xC1; + value = address; + index = 0; + blen = 1; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + ret = b[0]; + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + +static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + deb_info("%s %d", __func__, slot); + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC2; + value1 = address; + index = value; + blen = 0; + + ret = az6007_write(d, req, value1, index, NULL, blen); + if (ret != 0) + warn("usb out operation failed. (%d)", ret); + + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + if (slot != 0) + return -EINVAL; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); + + req = 0xC3; + value = address; + index = 0; + blen = 2; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + if (b[0] == 0) + warn("Read CI IO error"); + + ret = b[1]; + deb_info("read cam data = %x from 0x%x", b[1], value); + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + +static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC4; + value1 = address; + index = value; + blen = 0; + + ret = az6007_write(d, req, value1, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + req = 0xC8; + value = 0; + index = 0; + blen = 1; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else{ + ret = b[0]; + } + kfree(b); + return ret; +} + +static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret, i; + u8 req; + u16 value; + u16 index; + int blen; + + mutex_lock(&state->ca_mutex); + + req = 0xC6; + value = 1; + index = 0; + blen = 0; + + ret = az6007_write(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + msleep(500); + req = 0xC6; + value = 0; + index = 0; + blen = 0; + + ret = az6007_write(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + for (i = 0; i < 15; i++) { + msleep(100); + + if (CI_CamReady(ca, slot)) { + deb_info("CAM Ready"); + break; + } + } + msleep(5000); + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6007_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return 0; +} + +static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + deb_info("%s", __func__); + mutex_lock(&state->ca_mutex); + req = 0xC7; + value = 1; + index = 0; + blen = 0; + + ret = az6007_write(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + mutex_lock(&state->ca_mutex); + + req = 0xC5; + value = 0; + index = 0; + blen = 1; + + ret = az6007_read(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + if (!ret && b[0] == 1) { + ret = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + + +static void az6007_ci_uninit(struct dvb_usb_device *d) +{ + struct az6007_device_state *state; + + deb_info("%s", __func__); + + if (NULL == d) + return; + + state = (struct az6007_device_state *)d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + + +static int az6007_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct az6007_device_state *state = (struct az6007_device_state *)d->priv; + int ret; + + deb_info("%s", __func__); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = az6007_ci_read_attribute_mem; + state->ca.write_attribute_mem = az6007_ci_write_attribute_mem; + state->ca.read_cam_control = az6007_ci_read_cam_control; + state->ca.write_cam_control = az6007_ci_write_cam_control; + state->ca.slot_reset = az6007_ci_slot_reset; + state->ca.slot_shutdown = az6007_ci_slot_shutdown; + state->ca.slot_ts_enable = az6007_ci_slot_ts_enable; + state->ca.poll_slot_status = az6007_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + 0, /* flags */ + 1);/* n_slots */ + if (ret != 0) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + deb_info("CI initialized."); + + return 0; +} + +static int az6007_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) +{ + struct az6007_device_state *st = d->priv; + int ret; + + ret = az6007_read(d, AZ6007_READ_DATA, 6, 0, st->data, 6); + memcpy(mac, st->data, sizeof(mac)); + + if (ret > 0) + deb_info("%s: mac is %02x:%02x:%02x:%02x:%02x:%02x\n", + __func__, mac[0], mac[1], mac[2], + mac[3], mac[4], mac[5]); + + return ret; +} + +static int az6007_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct az6007_device_state *st = adap->dev->priv; + + deb_info("attaching demod drxk"); + + adap->fe_adap[0].fe = dvb_attach(drxk_attach, &terratec_h7_drxk, + &adap->dev->i2c_adap); + if (!adap->fe_adap[0].fe) + return -EINVAL; + + adap->fe_adap[0].fe->sec_priv = adap; + st->gate_ctrl = adap->fe_adap[0].fe->ops.i2c_gate_ctrl; + adap->fe_adap[0].fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + + az6007_ci_init(adap); + + return 0; +} + +static int az6007_tuner_attach(struct dvb_usb_adapter *adap) +{ + deb_info("attaching tuner mt2063"); + + /* Attach mt2063 to DVB-C frontend */ + if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) + adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); + if (!dvb_attach(mt2063_attach, adap->fe_adap[0].fe, + &az6007_mt2063_config, + &adap->dev->i2c_adap)) + return -EINVAL; + + if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) + adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); + + return 0; +} + +int az6007_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + struct az6007_device_state *st = d->priv; + int ret; + + deb_info("%s()\n", __func__); + + if (!st->warm) { + mutex_init(&st->mutex); + + ret = az6007_write(d, AZ6007_POWER, 0, 2, NULL, 0); + if (ret < 0) + return ret; + msleep(60); + ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0); + if (ret < 0) + return ret; + msleep(100); + ret = az6007_write(d, AZ6007_POWER, 1, 3, NULL, 0); + if (ret < 0) + return ret; + msleep(20); + ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0); + if (ret < 0) + return ret; + + msleep(400); + ret = az6007_write(d, FX2_SCON1, 0, 3, NULL, 0); + if (ret < 0) + return ret; + msleep(150); + ret = az6007_write(d, FX2_SCON1, 1, 3, NULL, 0); + if (ret < 0) + return ret; + msleep(430); + ret = az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0); + if (ret < 0) + return ret; + + st->warm = true; + + return 0; + } + + if (!onoff) + return 0; + + az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0); + az6007_write(d, AZ6007_TS_THROUGH, 0, 0, NULL, 0); + + return 0; +} + +/* I2C */ +static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct az6007_device_state *st = d->priv; + int i, j, len; + int ret = 0; + u16 index; + u16 value; + int length; + u8 req, addr; + + if (mutex_lock_interruptible(&st->mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + addr = msgs[i].addr << 1; + if (((i + 1) < num) + && (msgs[i].len == 1) + && (!msgs[i].flags & I2C_M_RD) + && (msgs[i + 1].flags & I2C_M_RD) + && (msgs[i].addr == msgs[i + 1].addr)) { + /* + * A write + read xfer for the same address, where + * the first xfer has just 1 byte length. + * Need to join both into one operation + */ + if (dvb_usb_az6007_debug & 2) + printk(KERN_DEBUG + "az6007 I2C xfer write+read addr=0x%x len=%d/%d: ", + addr, msgs[i].len, msgs[i + 1].len); + req = AZ6007_I2C_RD; + index = msgs[i].buf[0]; + value = addr | (1 << 8); + length = 6 + msgs[i + 1].len; + len = msgs[i + 1].len; + ret = __az6007_read(d->udev, req, value, index, + st->data, length); + if (ret >= len) { + for (j = 0; j < len; j++) { + msgs[i + 1].buf[j] = st->data[j + 5]; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT + "0x%02x ", + msgs[i + 1].buf[j]); + } + } else + ret = -EIO; + i++; + } else if (!(msgs[i].flags & I2C_M_RD)) { + /* write bytes */ + if (dvb_usb_az6007_debug & 2) + printk(KERN_DEBUG + "az6007 I2C xfer write addr=0x%x len=%d: ", + addr, msgs[i].len); + req = AZ6007_I2C_WR; + index = msgs[i].buf[0]; + value = addr | (1 << 8); + length = msgs[i].len - 1; + len = msgs[i].len - 1; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT "(0x%02x) ", msgs[i].buf[0]); + for (j = 0; j < len; j++) { + st->data[j] = msgs[i].buf[j + 1]; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT "0x%02x ", + st->data[j]); + } + ret = __az6007_write(d->udev, req, value, index, + st->data, length); + } else { + /* read bytes */ + if (dvb_usb_az6007_debug & 2) + printk(KERN_DEBUG + "az6007 I2C xfer read addr=0x%x len=%d: ", + addr, msgs[i].len); + req = AZ6007_I2C_RD; + index = msgs[i].buf[0]; + value = addr; + length = msgs[i].len + 6; + len = msgs[i].len; + ret = __az6007_read(d->udev, req, value, index, + st->data, length); + for (j = 0; j < len; j++) { + msgs[i].buf[j] = st->data[j + 5]; + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT + "0x%02x ", st->data[j + 5]); + } + } + if (dvb_usb_az6007_debug & 2) + printk(KERN_CONT "\n"); + if (ret < 0) + goto err; + } +err: + mutex_unlock(&st->mutex); + + if (ret < 0) { + info("%s ERROR: %i", __func__, ret); + return ret; + } + return num; +} + +static u32 az6007_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm az6007_i2c_algo = { + .master_xfer = az6007_i2c_xfer, + .functionality = az6007_i2c_func, +}; + +int az6007_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, int *cold) +{ + int ret; + u8 *mac; + + mac = kmalloc(6, GFP_ATOMIC); + if (!mac) + return -ENOMEM; + + /* Try to read the mac address */ + ret = __az6007_read(udev, AZ6007_READ_DATA, 6, 0, mac, 6); + if (ret == 6) + *cold = 0; + else + *cold = 1; + + kfree(mac); + + if (*cold) { + __az6007_write(udev, 0x09, 1, 0, NULL, 0); + __az6007_write(udev, 0x00, 0, 0, NULL, 0); + __az6007_write(udev, 0x00, 0, 0, NULL, 0); + } + + deb_info("Device is on %s state\n", *cold ? "warm" : "cold"); + return 0; +} + +static struct dvb_usb_device_properties az6007_properties; + +static void az6007_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + az6007_ci_uninit(d); + dvb_usb_device_exit(intf); +} + +static int az6007_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &az6007_properties, + THIS_MODULE, NULL, adapter_nr); +} + +static struct usb_device_id az6007_usb_table[] = { + {USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2)}, + {0}, +}; + +MODULE_DEVICE_TABLE(usb, az6007_usb_table); + +static struct dvb_usb_device_properties az6007_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-terratec-h7-az6007.fw", + .no_reconnect = 1, + .size_of_priv = sizeof(struct az6007_device_state), + .identify_state = az6007_identify_state, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = az6007_streaming_ctrl, + .tuner_attach = az6007_tuner_attach, + .frontend_attach = az6007_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } } + } }, + .power_ctrl = az6007_power_ctrl, + .read_mac_address = az6007_read_mac_addr, + + .rc.core = { + .rc_interval = 400, + .rc_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .module_name = "az6007", + .rc_query = az6007_rc_query, + .allowed_protos = RC_TYPE_NEC, + }, + .i2c_algo = &az6007_i2c_algo, + + .num_device_descs = 2, + .devices = { + { .name = "AzureWave DTV StarBox DVB-T/C USB2.0 (az6007)", + .cold_ids = { &az6007_usb_table[0], NULL }, + .warm_ids = { NULL }, + }, + { .name = "TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)", + .cold_ids = { &az6007_usb_table[1], &az6007_usb_table[2], NULL }, + .warm_ids = { NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver az6007_usb_driver = { + .name = "dvb_usb_az6007", + .probe = az6007_usb_probe, + .disconnect = az6007_usb_disconnect, + .id_table = az6007_usb_table, +}; + +/* module stuff */ +static int __init az6007_usb_module_init(void) +{ + int result; + deb_info("az6007 usb module init\n"); + + result = usb_register(&az6007_usb_driver); + if (result) { + err("usb_register failed. (%d)", result); + return result; + } + + return 0; +} + +static void __exit az6007_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + deb_info("az6007 usb module exit\n"); + usb_deregister(&az6007_usb_driver); +} + +module_init(az6007_usb_module_init); +module_exit(az6007_usb_module_exit); + +MODULE_AUTHOR("Henry Wang <Henry.wang@AzureWave.com>"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones"); +MODULE_VERSION("1.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 070e82aa53f5..02290c60f72f 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -677,11 +677,9 @@ static void dib0700_rc_urb_completion(struct urb *purb) u8 toggle; deb_info("%s()\n", __func__); - if (d == NULL) - return; - if (d->rc_dev == NULL) { /* This will occur if disable_rc_polling=1 */ + kfree(purb->transfer_buffer); usb_free_urb(purb); return; } @@ -690,6 +688,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) if (purb->status < 0) { deb_info("discontinuing polling\n"); + kfree(purb->transfer_buffer); usb_free_urb(purb); return; } @@ -784,8 +783,11 @@ int dib0700_rc_setup(struct dvb_usb_device *d) dib0700_rc_urb_completion, d); ret = usb_submit_urb(purb, GFP_ATOMIC); - if (ret) + if (ret) { err("rc submit urb failed\n"); + kfree(purb->transfer_buffer); + usb_free_urb(purb); + } return ret; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index d390ddaa5a53..397d8f232731 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -51,6 +51,7 @@ #define USB_VID_PINNACLE 0x2304 #define USB_VID_PCTV 0x2013 #define USB_VID_PIXELVIEW 0x1554 +#define USB_VID_REALTEK 0x0bda #define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd #define USB_VID_TELESTAR 0x10b9 @@ -80,6 +81,7 @@ #define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_ANYSEE 0x861f #define USB_PID_AZUREWAVE_AD_TU700 0x3237 +#define USB_PID_AZUREWAVE_6007 0x0ccd #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 @@ -125,6 +127,8 @@ #define USB_PID_E3C_EC168_3 0xfffb #define USB_PID_E3C_EC168_4 0x1001 #define USB_PID_E3C_EC168_5 0x1002 +#define USB_PID_FREECOM_DVBT 0x0160 +#define USB_PID_FREECOM_DVBT_2 0x0161 #define USB_PID_UNIWILL_STK7700P 0x6003 #define USB_PID_GENIUS_TVGO_DVB_T03 0x4012 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 @@ -226,6 +230,8 @@ #define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 #define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab +#define USB_PID_TERRATEC_H7 0x10b4 +#define USB_PID_TERRATEC_H7_2 0x10a3 #define USB_PID_TERRATEC_T3 0x10a0 #define USB_PID_TERRATEC_T5 0x10a1 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e @@ -249,6 +255,8 @@ #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 #define USB_PID_PCTV_452E 0x021f +#define USB_PID_REALTEK_RTL2831U 0x2831 +#define USB_PID_REALTEK_RTL2832U 0x2832 #define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007 #define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI 0x300a #define USB_PID_NEBULA_DIGITV 0x0201 diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c index 9f01cd7a6e3f..3b7b102f20ae 100644 --- a/drivers/media/dvb/dvb-usb/it913x.c +++ b/drivers/media/dvb/dvb-usb/it913x.c @@ -64,6 +64,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct it913x_state { u8 id; struct ite_config it913x_config; + u8 pid_filter_onoff; }; struct ite_config it913x_config; @@ -259,15 +260,16 @@ static u32 it913x_query(struct usb_device *udev, u8 pro) static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) { + struct it913x_state *st = adap->dev->priv; struct usb_device *udev = adap->dev->udev; int ret; u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); + deb_info(1, "PID_C (%02x)", onoff); - ret = it913x_wr_reg(udev, pro, PID_EN, onoff); + ret = it913x_wr_reg(udev, pro, PID_EN, st->pid_filter_onoff); mutex_unlock(&adap->dev->i2c_mutex); return ret; @@ -276,12 +278,13 @@ static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) static int it913x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { + struct it913x_state *st = adap->dev->priv; struct usb_device *udev = adap->dev->udev; int ret; u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); + deb_info(1, "PID_F (%02x)", onoff); ret = it913x_wr_reg(udev, pro, PID_LSB, (u8)(pid & 0xff)); @@ -292,6 +295,13 @@ static int it913x_pid_filter(struct dvb_usb_adapter *adap, ret |= it913x_wr_reg(udev, pro, PID_INX, (u8)(index & 0x1f)); + if (udev->speed == USB_SPEED_HIGH && pid == 0x2000) { + ret |= it913x_wr_reg(udev, pro, PID_EN, !onoff); + st->pid_filter_onoff = !onoff; + } else + st->pid_filter_onoff = + adap->fe_adap[adap->active_fe].pid_filtering; + mutex_unlock(&adap->dev->i2c_mutex); return 0; } @@ -316,8 +326,8 @@ static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int ret; u32 reg; u8 pro; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; + + mutex_lock(&d->i2c_mutex); debug_data_snipet(1, "Message out", msg[0].buf); deb_info(2, "num of messages %d address %02x", num, msg[0].addr); @@ -358,8 +368,7 @@ static int it913x_rc_query(struct dvb_usb_device *d) int ret; u32 key; /* Avoid conflict with frontends*/ - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&d->i2c_mutex); ret = it913x_io(d->udev, READ_LONG, PRO_LINK, CMD_IR_GET, 0, 0, &ibuf[0], sizeof(ibuf)); @@ -388,19 +397,12 @@ static int ite_firmware_select(struct usb_device *udev, { int sw; /* auto switch */ - if (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_ITETECH_IT9135) - sw = IT9135_V1_FW; - else if (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_ITETECH_IT9135_9005) + if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_KWORLD_2) + sw = IT9137_FW; + else if (it913x_config.chip_ver == 1) sw = IT9135_V1_FW; - else if (le16_to_cpu(udev->descriptor.idProduct) == - USB_PID_ITETECH_IT9135_9006) { + else sw = IT9135_V2_FW; - if (it913x_config.tuner_id_0 == 0) - it913x_config.tuner_id_0 = IT9135_60; - } else - sw = IT9137_FW; /* force switch */ if (dvb_usb_it913x_firmware != IT9135_AUTO) @@ -410,41 +412,103 @@ static int ite_firmware_select(struct usb_device *udev, case IT9135_V1_FW: it913x_config.firmware_ver = 1; it913x_config.adc_x2 = 1; + it913x_config.read_slevel = false; props->firmware = fw_it9135_v1; break; case IT9135_V2_FW: it913x_config.firmware_ver = 1; it913x_config.adc_x2 = 1; + it913x_config.read_slevel = false; props->firmware = fw_it9135_v2; + switch (it913x_config.tuner_id_0) { + case IT9135_61: + case IT9135_62: + break; + default: + info("Unknown tuner ID applying default 0x60"); + case IT9135_60: + it913x_config.tuner_id_0 = IT9135_60; + } break; case IT9137_FW: default: it913x_config.firmware_ver = 0; it913x_config.adc_x2 = 0; + it913x_config.read_slevel = true; props->firmware = fw_it9137; } return 0; } +static void it913x_select_remote(struct usb_device *udev, + struct dvb_usb_device_properties *props) +{ + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case USB_PID_ITETECH_IT9135_9005: + props->rc.core.rc_codes = RC_MAP_IT913X_V2; + return; + default: + props->rc.core.rc_codes = RC_MAP_IT913X_V1; + } + return; +} + #define TS_MPEG_PKT_SIZE 188 #define EP_LOW 21 #define TS_BUFFER_SIZE_PID (EP_LOW*TS_MPEG_PKT_SIZE) #define EP_HIGH 348 #define TS_BUFFER_SIZE_MAX (EP_HIGH*TS_MPEG_PKT_SIZE) -static int it913x_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) +static int it913x_select_config(struct usb_device *udev, + struct dvb_usb_device_properties *props) { - int ret = 0, firm_no; - u8 reg, remote; + int ret = 0, reg; + bool proprietary_ir = false; - firm_no = it913x_return_status(udev); + if (it913x_config.chip_ver == 0x02 + && it913x_config.chip_type == 0x9135) + reg = it913x_read_reg(udev, 0x461d); + else + reg = it913x_read_reg(udev, 0x461b); - /* checnk for dual mode */ - it913x_config.dual_mode = it913x_read_reg(udev, 0x49c5); + if (reg < 0) + return reg; + + if (reg == 0) { + it913x_config.dual_mode = 0; + it913x_config.tuner_id_0 = IT9135_38; + proprietary_ir = true; + } else { + /* TS mode */ + reg = it913x_read_reg(udev, 0x49c5); + if (reg < 0) + return reg; + it913x_config.dual_mode = reg; + + /* IR mode type */ + reg = it913x_read_reg(udev, 0x49ac); + if (reg < 0) + return reg; + if (reg == 5) { + info("Remote propriety (raw) mode"); + proprietary_ir = true; + } else if (reg == 1) { + info("Remote HID mode NOT SUPPORTED"); + proprietary_ir = false; + props->rc.core.rc_codes = NULL; + } else + props->rc.core.rc_codes = NULL; + + /* Tuner_id */ + reg = it913x_read_reg(udev, 0x49d0); + if (reg < 0) + return reg; + it913x_config.tuner_id_0 = reg; + } + + if (proprietary_ir) + it913x_select_remote(udev, props); if (udev->speed != USB_SPEED_HIGH) { props->adapter[0].fe[0].pid_filter_count = 5; @@ -459,17 +523,6 @@ static int it913x_identify_state(struct usb_device *udev, if(props->adapter[0].fe[0].pid_filter_count == 5) props->adapter[0].fe[0].pid_filter_count = 31; - /* TODO different remotes */ - remote = it913x_read_reg(udev, 0x49ac); /* Remote */ - if (remote == 0) - props->rc.core.rc_codes = NULL; - - /* TODO at the moment tuner_id is always assigned to 0x38 */ - it913x_config.tuner_id_0 = it913x_read_reg(udev, 0x49d0); - - info("Dual mode=%x Remote=%x Tuner Type=%x", it913x_config.dual_mode - , remote, it913x_config.tuner_id_0); - /* Select Stream Buffer Size and pid filter option*/ if (pid_filter) { props->adapter[0].fe[0].stream.u.bulk.buffersize = @@ -490,8 +543,29 @@ static int it913x_identify_state(struct usb_device *udev, } else props->num_adapters = 1; + info("Dual mode=%x Tuner Type=%x", it913x_config.dual_mode, + it913x_config.tuner_id_0); + ret = ite_firmware_select(udev, props); + return ret; +} + +static int it913x_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret = 0, firm_no; + u8 reg; + + firm_no = it913x_return_status(udev); + + /* Read and select config */ + ret = it913x_select_config(udev, props); + if (ret < 0) + return ret; + if (firm_no > 0) { *cold = 0; return 0; @@ -538,18 +612,22 @@ static int it913x_identify_state(struct usb_device *udev, static int it913x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { + struct it913x_state *st = adap->dev->priv; int ret = 0; u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; deb_info(1, "STM (%02x)", onoff); - if (!onoff) + if (!onoff) { + mutex_lock(&adap->dev->i2c_mutex); + ret = it913x_wr_reg(adap->dev->udev, pro, PID_RST, 0x1); + mutex_unlock(&adap->dev->i2c_mutex); + st->pid_filter_onoff = + adap->fe_adap[adap->active_fe].pid_filtering; - mutex_unlock(&adap->dev->i2c_mutex); + } return ret; } @@ -789,7 +867,7 @@ static struct dvb_usb_device_properties it913x_properties = { .rc_query = it913x_rc_query, .rc_interval = IT913X_POLL, .allowed_protos = RC_TYPE_NEC, - .rc_codes = RC_MAP_MSI_DIGIVOX_III, + .rc_codes = RC_MAP_IT913X_V1, }, .i2c_algo = &it913x_i2c_algo, .num_device_descs = 5, @@ -823,5 +901,5 @@ module_usb_driver(it913x_driver); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.22"); +MODULE_VERSION("1.27"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c index 291f6b110399..5dde06d066ff 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/dvb/dvb-usb/lmedm04.c @@ -77,6 +77,7 @@ #include "stv0299.h" #include "dvb-pll.h" #include "z0194a.h" +#include "m88rs2000.h" @@ -104,7 +105,7 @@ MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG"); static int pid_filter; module_param_named(pid, pid_filter, int, 0644); -MODULE_PARM_DESC(pid, "set default 0=on 1=off"); +MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -113,6 +114,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define TUNER_LG 0x1 #define TUNER_S7395 0x2 #define TUNER_S0194 0x3 +#define TUNER_RS2000 0x4 struct lme2510_state { u8 id; @@ -121,6 +123,8 @@ struct lme2510_state { u8 signal_level; u8 signal_sn; u8 time_key; + u8 last_key; + u8 key_timeout; u8 i2c_talk_onoff; u8 i2c_gate; u8 i2c_tuner_gate_w; @@ -128,6 +132,7 @@ struct lme2510_state { u8 i2c_tuner_addr; u8 stream_on; u8 pid_size; + u8 pid_off; void *buffer; struct urb *lme_urb; void *usb_buffer; @@ -178,14 +183,8 @@ static int lme2510_usb_talk(struct dvb_usb_device *d, /* the read/write capped at 64 */ memcpy(buff, wbuf, (wlen < 64) ? wlen : 64); - ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01)); - ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01); - msleep(10); - - ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01)); - ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ? rlen : 64 , 0x01); @@ -199,9 +198,14 @@ static int lme2510_usb_talk(struct dvb_usb_device *d, static int lme2510_stream_restart(struct dvb_usb_device *d) { - static u8 stream_on[] = LME_ST_ON_W; + struct lme2510_state *st = d->priv; + u8 all_pids[] = LME_ALL_PIDS; + u8 stream_on[] = LME_ST_ON_W; int ret; - u8 rbuff[10]; + u8 rbuff[1]; + if (st->pid_off) + ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids), + rbuff, sizeof(rbuff)); /*Restart Stream Command*/ ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on), rbuff, sizeof(rbuff)); @@ -308,6 +312,14 @@ static void lme2510_int_response(struct urb *lme_urb) ((ibuf[2] & 0x01) << 0x03); } break; + case TUNER_RS2000: + if (ibuf[2] > 0) + st->signal_lock = 0xff; + else + st->signal_lock = 0xf0; + st->signal_level = ibuf[4]; + st->signal_sn = ibuf[5]; + st->time_key = ibuf[7]; default: break; } @@ -359,19 +371,20 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap) static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct lme2510_state *st = adap->dev->priv; - static u8 clear_pid_reg[] = LME_CLEAR_PID; + static u8 clear_pid_reg[] = LME_ALL_PIDS; static u8 rbuf[1]; int ret; deb_info(1, "PID Clearing Filter"); - ret = mutex_lock_interruptible(&adap->dev->i2c_mutex); - if (ret < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); - if (!onoff) + if (!onoff) { ret |= lme2510_usb_talk(adap->dev, clear_pid_reg, sizeof(clear_pid_reg), rbuf, sizeof(rbuf)); + st->pid_off = true; + } else + st->pid_off = false; st->pid_size = 0; @@ -389,11 +402,9 @@ static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, pid, index, onoff); if (onoff) { - ret = mutex_lock_interruptible(&adap->dev->i2c_mutex); - if (ret < 0) - return -EAGAIN; - ret |= lme2510_enable_pid(adap->dev, index, pid); - mutex_unlock(&adap->dev->i2c_mutex); + mutex_lock(&adap->dev->i2c_mutex); + ret |= lme2510_enable_pid(adap->dev, index, pid); + mutex_unlock(&adap->dev->i2c_mutex); } @@ -425,9 +436,6 @@ static int lme2510_msg(struct dvb_usb_device *d, int ret = 0; struct lme2510_state *st = d->priv; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - if (st->i2c_talk_onoff == 1) { ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); @@ -456,8 +464,6 @@ static int lme2510_msg(struct dvb_usb_device *d, st->i2c_talk_onoff = 0; } } - if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5)) - msleep(5); } break; case TUNER_S0194: @@ -472,10 +478,12 @@ static int lme2510_msg(struct dvb_usb_device *d, } } break; + case TUNER_RS2000: default: break; } } else { + /* TODO rewrite this section */ switch (st->tuner_config) { case TUNER_LG: switch (wbuf[3]) { @@ -559,6 +567,24 @@ static int lme2510_msg(struct dvb_usb_device *d, break; } break; + case TUNER_RS2000: + switch (wbuf[3]) { + case 0x8c: + rbuf[0] = 0x55; + rbuf[1] = 0xff; + if (st->last_key == st->time_key) { + st->key_timeout++; + if (st->key_timeout > 5) + rbuf[1] = 0; + } else + st->key_timeout = 0; + st->last_key = st->time_key; + break; + default: + lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); + st->i2c_talk_onoff = 1; + break; + } default: break; } @@ -568,8 +594,6 @@ static int lme2510_msg(struct dvb_usb_device *d, } - mutex_unlock(&d->i2c_mutex); - return ret; } @@ -584,6 +608,8 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], u16 len; u8 gate = st->i2c_gate; + mutex_lock(&d->i2c_mutex); + if (gate == 0) gate = 5; @@ -622,6 +648,7 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) { deb_info(1, "i2c transfer failed."); + mutex_unlock(&d->i2c_mutex); return -EAGAIN; } @@ -634,6 +661,8 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], } } } + + mutex_unlock(&d->i2c_mutex); return i; } @@ -653,7 +682,7 @@ static int lme2510_identify_state(struct usb_device *udev, struct dvb_usb_device_description **desc, int *cold) { - if (pid_filter > 0) + if (pid_filter != 2) props->adapter[0].fe[0].caps &= ~DVB_USB_ADAP_NEED_PID_FILTERING; *cold = 0; @@ -663,7 +692,7 @@ static int lme2510_identify_state(struct usb_device *udev, static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct lme2510_state *st = adap->dev->priv; - static u8 clear_reg_3[] = LME_CLEAR_PID; + static u8 clear_reg_3[] = LME_ALL_PIDS; static u8 rbuf[1]; int ret = 0, rlen = sizeof(rbuf); @@ -675,8 +704,7 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) else { deb_info(1, "STM Steam Off"); /* mutex is here only to avoid collision with I2C */ - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); ret = lme2510_usb_talk(adap->dev, clear_reg_3, sizeof(clear_reg_3), rbuf, rlen); @@ -781,16 +809,18 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) const char fw_c_s7395[] = "dvb-usb-lme2510c-s7395.fw"; const char fw_c_lg[] = "dvb-usb-lme2510c-lg.fw"; const char fw_c_s0194[] = "dvb-usb-lme2510c-s0194.fw"; + const char fw_c_rs2000[] = "dvb-usb-lme2510c-rs2000.fw"; const char fw_lg[] = "dvb-usb-lme2510-lg.fw"; const char fw_s0194[] = "dvb-usb-lme2510-s0194.fw"; const char *fw_lme; - int ret, cold_fw; + int ret = 0, cold_fw; cold = (cold > 0) ? (cold & 1) : 0; cold_fw = !cold; - if (le16_to_cpu(udev->descriptor.idProduct) == 0x1122) { + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case 0x1122: switch (dvb_usb_lme2510_firmware) { default: dvb_usb_lme2510_firmware = TUNER_S0194; @@ -813,7 +843,8 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold_fw = 0; break; } - } else { + break; + case 0x1120: switch (dvb_usb_lme2510_firmware) { default: dvb_usb_lme2510_firmware = TUNER_S7395; @@ -842,8 +873,17 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold_fw = 0; break; } + break; + case 0x22f0: + fw_lme = fw_c_rs2000; + ret = request_firmware(&fw, fw_lme, &udev->dev); + dvb_usb_lme2510_firmware = TUNER_RS2000; + break; + default: + fw_lme = fw_c_s7395; } + if (cold_fw) { info("FRM Loading %s file", fw_lme); ret = lme2510_download_firmware(udev, fw); @@ -906,6 +946,29 @@ static struct stv0299_config sharp_z0194_config = { .set_symbol_rate = sharp_z0194a_set_symbol_rate, }; +static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe, + int caller) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *d = adap->dev; + struct lme2510_state *st = d->priv; + + mutex_lock(&d->i2c_mutex); + if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) { + st->i2c_talk_onoff = 0; + lme2510_stream_restart(d); + } + mutex_unlock(&d->i2c_mutex); + + return 0; +} + +static struct m88rs2000_config m88rs2000_config = { + .demod_addr = 0xd0, + .tuner_addr = 0xc0, + .set_ts_params = dm04_rs2000_set_ts_param, +}; + static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { @@ -915,8 +978,7 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, static u8 rbuf[1]; int ret = 0, len = 3, rlen = 1; - if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&adap->dev->i2c_mutex); switch (voltage) { case SEC_VOLTAGE_18: @@ -937,12 +999,31 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, return (ret < 0) ? -ENODEV : 0; } +static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct lme2510_state *st = adap->dev->priv; + + *strength = (u16)((u32)st->signal_level * 0xffff / 0x7f); + return 0; +} + +static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct lme2510_state *st = adap->dev->priv; + + *snr = (u16)((u32)st->signal_sn * 0xffff / 0xff); + return 0; +} + static int lme_name(struct dvb_usb_adapter *adap) { struct lme2510_state *st = adap->dev->priv; const char *desc = adap->dev->desc->name; char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395", - " SHARP:BS2F7HZ0194"}; + " SHARP:BS2F7HZ0194", " RS2000"}; char *name = adap->fe_adap[0].fe->ops.info.name; strlcpy(name, desc, 128); @@ -958,60 +1039,82 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) int ret = 0; st->i2c_talk_onoff = 1; + switch (le16_to_cpu(adap->dev->udev->descriptor.idProduct)) { + case 0x1122: + case 0x1120: + st->i2c_gate = 4; + adap->fe_adap[0].fe = dvb_attach(tda10086_attach, + &tda10086_config, &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe) { + info("TUN Found Frontend TDA10086"); + st->i2c_tuner_gate_w = 4; + st->i2c_tuner_gate_r = 4; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_LG; + if (dvb_usb_lme2510_firmware != TUNER_LG) { + dvb_usb_lme2510_firmware = TUNER_LG; + ret = lme_firmware_switch(adap->dev->udev, 1); + } + break; + } - st->i2c_gate = 4; - adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, - &adap->dev->i2c_adap); - - if (adap->fe_adap[0].fe) { - info("TUN Found Frontend TDA10086"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 4; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_LG; - if (dvb_usb_lme2510_firmware != TUNER_LG) { - dvb_usb_lme2510_firmware = TUNER_LG; - ret = lme_firmware_switch(adap->dev->udev, 1); + st->i2c_gate = 4; + adap->fe_adap[0].fe = dvb_attach(stv0299_attach, + &sharp_z0194_config, &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe) { + info("FE Found Stv0299"); + st->i2c_tuner_gate_w = 4; + st->i2c_tuner_gate_r = 5; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_S0194; + if (dvb_usb_lme2510_firmware != TUNER_S0194) { + dvb_usb_lme2510_firmware = TUNER_S0194; + ret = lme_firmware_switch(adap->dev->udev, 1); + } + break; } - goto end; - } - st->i2c_gate = 4; - adap->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194_config, + st->i2c_gate = 5; + adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config, &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) { - info("FE Found Stv0299"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_S0194; - if (dvb_usb_lme2510_firmware != TUNER_S0194) { - dvb_usb_lme2510_firmware = TUNER_S0194; - ret = lme_firmware_switch(adap->dev->udev, 1); + + if (adap->fe_adap[0].fe) { + info("FE Found Stv0288"); + st->i2c_tuner_gate_w = 4; + st->i2c_tuner_gate_r = 5; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_S7395; + if (dvb_usb_lme2510_firmware != TUNER_S7395) { + dvb_usb_lme2510_firmware = TUNER_S7395; + ret = lme_firmware_switch(adap->dev->udev, 1); + } + break; } - goto end; - } + case 0x22f0: + st->i2c_gate = 5; + adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach, + &m88rs2000_config, &adap->dev->i2c_adap); - st->i2c_gate = 5; - adap->fe_adap[0].fe = dvb_attach(stv0288_attach, &lme_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe) { - info("FE Found Stv0288"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_S7395; - if (dvb_usb_lme2510_firmware != TUNER_S7395) { - dvb_usb_lme2510_firmware = TUNER_S7395; - ret = lme_firmware_switch(adap->dev->udev, 1); + if (adap->fe_adap[0].fe) { + info("FE Found M88RS2000"); + st->i2c_tuner_gate_w = 5; + st->i2c_tuner_gate_r = 5; + st->i2c_tuner_addr = 0xc0; + st->tuner_config = TUNER_RS2000; + adap->fe_adap[0].fe->ops.read_signal_strength = + dm04_rs2000_read_signal_strength; + adap->fe_adap[0].fe->ops.read_snr = + dm04_rs2000_read_snr; } - } else { - info("DM04 Not Supported"); - return -ENODEV; + break; } + if (adap->fe_adap[0].fe == NULL) { + info("DM04/QQBOX Not Powered up or not Supported"); + return -ENODEV; + } -end: if (ret) { + if (ret) { if (adap->fe_adap[0].fe) { dvb_frontend_detach(adap->fe_adap[0].fe); adap->fe_adap[0].fe = NULL; @@ -1028,7 +1131,7 @@ end: if (ret) { static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) { struct lme2510_state *st = adap->dev->priv; - char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA"}; + char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"}; int ret = 0; switch (st->tuner_config) { @@ -1047,6 +1150,9 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) &adap->dev->i2c_adap, DVB_PLL_OPERA1)) ret = st->tuner_config; break; + case TUNER_RS2000: + ret = st->tuner_config; + break; default: break; } @@ -1075,10 +1181,9 @@ static int lme2510_powerup(struct dvb_usb_device *d, int onoff) static u8 lnb_on[] = LNB_ON; static u8 lnb_off[] = LNB_OFF; static u8 rbuf[1]; - int ret, len = 3, rlen = 1; + int ret = 0, len = 3, rlen = 1; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; + mutex_lock(&d->i2c_mutex); if (onoff) ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen); @@ -1136,6 +1241,7 @@ static int lme2510_probe(struct usb_interface *intf, static struct usb_device_id lme2510_table[] = { { USB_DEVICE(0x3344, 0x1122) }, /* LME2510 */ { USB_DEVICE(0x3344, 0x1120) }, /* LME2510C */ + { USB_DEVICE(0x3344, 0x22f0) }, /* LME2510C RS2000 */ {} /* Terminating entry */ }; @@ -1153,7 +1259,7 @@ static struct dvb_usb_device_properties lme2510_properties = { DVB_USB_ADAP_NEED_PID_FILTERING| DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .streaming_ctrl = lme2510_streaming_ctrl, - .pid_filter_count = 15, + .pid_filter_count = 32, .pid_filter = lme2510_pid_filter, .pid_filter_ctrl = lme2510_pid_filter_ctrl, .frontend_attach = dm04_lme2510_frontend_attach, @@ -1204,7 +1310,7 @@ static struct dvb_usb_device_properties lme2510c_properties = { DVB_USB_ADAP_NEED_PID_FILTERING| DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .streaming_ctrl = lme2510_streaming_ctrl, - .pid_filter_count = 15, + .pid_filter_count = 32, .pid_filter = lme2510_pid_filter, .pid_filter_ctrl = lme2510_pid_filter_ctrl, .frontend_attach = dm04_lme2510_frontend_attach, @@ -1234,11 +1340,14 @@ static struct dvb_usb_device_properties lme2510c_properties = { .identify_state = lme2510_identify_state, .i2c_algo = &lme2510_i2c_algo, .generic_bulk_ctrl_endpoint = 0, - .num_device_descs = 1, + .num_device_descs = 2, .devices = { { "DM04_LME2510C_DVB-S", { &lme2510_table[1], NULL }, }, + { "DM04_LME2510C_DVB-S RS2000", + { &lme2510_table[2], NULL }, + }, } }; @@ -1295,5 +1404,5 @@ module_usb_driver(lme2510_driver); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0"); -MODULE_VERSION("1.91"); +MODULE_VERSION("1.99"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/lmedm04.h b/drivers/media/dvb/dvb-usb/lmedm04.h index ab21e2ef53fa..e9c207205c2f 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.h +++ b/drivers/media/dvb/dvb-usb/lmedm04.h @@ -41,6 +41,7 @@ #define LME_ST_ON_W {0x06, 0x00} #define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0} #define LME_ZERO_PID {0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c} +#define LME_ALL_PIDS {0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81} /* LNB Voltage * 07 XX XX diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c index 38ef0253d3b5..81305de2fea5 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf.c @@ -351,15 +351,13 @@ static int mxl111sf_ep6_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) adap_state->ep6_clockphase, 0, 0); mxl_fail(ret); +#if 0 } else { ret = mxl111sf_disable_656_port(state); mxl_fail(ret); +#endif } - mxl111sf_read_reg(state, 0x12, &tmp); - tmp &= ~0x04; - mxl111sf_write_reg(state, 0x12, tmp); - return ret; } diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c new file mode 100644 index 000000000000..8f4736a10fc8 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c @@ -0,0 +1,982 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include "rtl28xxu.h" + +#include "rtl2830.h" + +#include "qt1010.h" +#include "mt2060.h" +#include "mxl5005s.h" + +/* debug */ +static int dvb_usb_rtl28xxu_debug; +module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) +{ + int ret; + unsigned int pipe; + u8 requesttype; + u8 *buf; + + buf = kmalloc(req->size, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto err; + } + + if (req->index & CMD_WR_FLAG) { + /* write */ + memcpy(buf, req->data, req->size); + requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); + pipe = usb_sndctrlpipe(d->udev, 0); + } else { + /* read */ + requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, + req->index, buf, req->size, 1000); + if (ret > 0) + ret = 0; + + deb_dump(0, requesttype, req->value, req->index, buf, req->size, + deb_xfer); + + /* read request, copy returned data to return buf */ + if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) + memcpy(req->data, buf, req->size); + + kfree(buf); + + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2831_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +{ + struct rtl28xxu_req req; + + if (reg < 0x3000) + req.index = CMD_USB_WR; + else if (reg < 0x4000) + req.index = CMD_SYS_WR; + else + req.index = CMD_IR_WR; + + req.value = reg; + req.size = len; + req.data = val; + + return rtl28xxu_ctrl_msg(d, &req); +} + +static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +{ + struct rtl28xxu_req req; + + if (reg < 0x3000) + req.index = CMD_USB_RD; + else if (reg < 0x4000) + req.index = CMD_SYS_RD; + else + req.index = CMD_IR_RD; + + req.value = reg; + req.size = len; + req.data = val; + + return rtl28xxu_ctrl_msg(d, &req); +} + +static int rtl2831_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + return rtl2831_wr_regs(d, reg, &val, 1); +} + +static int rtl2831_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + return rtl2831_rd_regs(d, reg, val, 1); +} + +/* I2C */ +static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + int ret; + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct rtl28xxu_priv *priv = d->priv; + struct rtl28xxu_req req; + + /* + * It is not known which are real I2C bus xfer limits, but testing + * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes. + * TODO: find out RTL2832U lens + */ + + /* + * I2C adapter logic looks rather complicated due to fact it handles + * three different access methods. Those methods are; + * 1) integrated demod access + * 2) old I2C access + * 3) new I2C access + * + * Used method is selected in order 1, 2, 3. Method 3 can handle all + * requests but there is two reasons why not use it always; + * 1) It is most expensive, usually two USB messages are needed + * 2) At least RTL2831U does not support it + * + * Method 3 is needed in case of I2C write+read (typical register read) + * where write is more than one byte. + */ + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num == 2 && !(msg[0].flags & I2C_M_RD) && + (msg[1].flags & I2C_M_RD)) { + if (msg[0].len > 24 || msg[1].len > 24) { + /* TODO: check msg[0].len max */ + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } else if (msg[0].addr == 0x10) { + /* method 1 - integrated demod */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_DEMOD_RD | priv->page; + req.size = msg[1].len; + req.data = &msg[1].buf[0]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else if (msg[0].len < 2) { + /* method 2 - old I2C */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_I2C_RD; + req.size = msg[1].len; + req.data = &msg[1].buf[0]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* method 3 - new I2C */ + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_WR; + req.size = msg[0].len; + req.data = msg[0].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + if (ret) + goto err_mutex_unlock; + + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_RD; + req.size = msg[1].len; + req.data = msg[1].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { + if (msg[0].len > 22) { + /* TODO: check msg[0].len max */ + ret = -EOPNOTSUPP; + goto err_mutex_unlock; + } else if (msg[0].addr == 0x10) { + /* method 1 - integrated demod */ + if (msg[0].buf[0] == 0x00) { + /* save demod page for later demod access */ + priv->page = msg[0].buf[1]; + ret = 0; + } else { + req.value = (msg[0].buf[0] << 8) | + (msg[0].addr << 1); + req.index = CMD_DEMOD_WR | priv->page; + req.size = msg[0].len-1; + req.data = &msg[0].buf[1]; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else if (msg[0].len < 23) { + /* method 2 - old I2C */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_I2C_WR; + req.size = msg[0].len-1; + req.data = &msg[0].buf[1]; + ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* method 3 - new I2C */ + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_WR; + req.size = msg[0].len; + req.data = msg[0].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else { + ret = -EINVAL; + } + +err_mutex_unlock: + mutex_unlock(&d->i2c_mutex); + + return ret ? ret : num; +} + +static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm rtl28xxu_i2c_algo = { + .master_xfer = rtl28xxu_i2c_xfer, + .functionality = rtl28xxu_i2c_func, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .if_dvbt = 36150000, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, + +}; + +static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 1, + .if_dvbt = 36125000, + .vtop = 0x20, + .krf = 0x04, + .agc_targ_val = 0x2d, +}; + +static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { + .i2c_addr = 0x10, /* 0x20 */ + .xtal = 28800000, + .ts_mode = 0, + .spec_inv = 0, + .if_dvbt = 4570000, + .vtop = 0x3f, + .krf = 0x04, + .agc_targ_val = 0x3e, +}; + +static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + u8 buf[1]; + struct rtl2830_config *rtl2830_config; + /* open RTL2831U/RTL2830 I2C gate */ + struct rtl28xxu_req req_gate = { 0x0120, 0x0011, 0x0001, "\x08" }; + /* for MT2060 tuner probe */ + struct rtl28xxu_req req_mt2060 = { 0x00c0, CMD_I2C_RD, 1, buf }; + /* for QT1010 tuner probe */ + struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf }; + + deb_info("%s:\n", __func__); + + /* + * RTL2831U GPIOs + * ========================================================= + * GPIO0 | tuner#0 | 0 off | 1 on | MXL5005S (?) + * GPIO2 | LED | 0 off | 1 on | + * GPIO4 | tuner#1 | 0 on | 1 off | MT2060 + */ + + /* GPIO direction */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + if (ret) + goto err; + + /* enable as output GPIO0, GPIO2, GPIO4 */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + if (ret) + goto err; + + /* check QT1010 ID(?) register; reg=0f val=2c */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010); + if (ret == 0 && buf[0] == 0x2c) { + priv->tuner = TUNER_RTL2830_QT1010; + rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; + deb_info("%s: QT1010\n", __func__); + goto found; + } else { + deb_info("%s: QT1010 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate); + if (ret) + goto err; + + /* check MT2060 ID register; reg=00 val=63 */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060); + if (ret == 0 && buf[0] == 0x63) { + priv->tuner = TUNER_RTL2830_MT2060; + rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; + deb_info("%s: MT2060\n", __func__); + goto found; + } else { + deb_info("%s: MT2060 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* assume MXL5005S */ + ret = 0; + priv->tuner = TUNER_RTL2830_MXL5005S; + rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; + deb_info("%s: MXL5005S\n", __func__); + goto found; + +found: + /* attach demodulator */ + adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config, + &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe == NULL) { + ret = -ENODEV; + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + u8 buf[1]; + /* open RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; + /* close RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; + /* for FC2580 tuner probe */ + struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; + + deb_info("%s:\n", __func__); + + /* GPIO direction */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + if (ret) + goto err; + + /* enable as output GPIO0, GPIO2, GPIO4 */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + if (ret) + goto err; + + ret = rtl2831_wr_reg(adap->dev, SYS_DEMOD_CTL, 0xe8); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open); + if (ret) + goto err; + + /* check FC2580 ID register; reg=01 val=56 */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580); + if (ret == 0 && buf[0] == 0x56) { + priv->tuner = TUNER_RTL2832_FC2580; + deb_info("%s: FC2580\n", __func__); + goto found; + } else { + deb_info("%s: FC2580 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + if (ret) + goto err; + + /* tuner not found */ + ret = -ENODEV; + goto err; + +found: + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + if (ret) + goto err; + + /* attach demodulator */ + /* TODO: */ + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct qt1010_config rtl28xxu_qt1010_config = { + .i2c_address = 0x62, /* 0xc4 */ +}; + +static struct mt2060_config rtl28xxu_mt2060_config = { + .i2c_address = 0x60, /* 0xc0 */ + .clock_out = 0, +}; + +static struct mxl5005s_config rtl28xxu_mxl5005s_config = { + .i2c_address = 0x63, /* 0xc6 */ + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C_H, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + struct i2c_adapter *rtl2830_tuner_i2c; + struct dvb_frontend *fe; + + deb_info("%s:\n", __func__); + + /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ + rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe); + + switch (priv->tuner) { + case TUNER_RTL2830_QT1010: + fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, + rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); + break; + case TUNER_RTL2830_MT2060: + fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, + rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, + 1220); + break; + case TUNER_RTL2830_MXL5005S: + fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); + break; + default: + fe = NULL; + err("unknown tuner=%d", priv->tuner); + } + + if (fe == NULL) { + ret = -ENODEV; + goto err; + } + + return 0; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_frontend *fe; + + deb_info("%s:\n", __func__); + + switch (priv->tuner) { + case TUNER_RTL2832_FC2580: + /* TODO: */ + fe = NULL; + break; + default: + fe = NULL; + err("unknown tuner=%d", priv->tuner); + } + + if (fe == NULL) { + ret = -ENODEV; + goto err; + } + + return 0; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) +{ + int ret; + u8 buf[2], gpio; + + deb_info("%s: onoff=%d\n", __func__, onoff); + + ret = rtl2831_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio); + if (ret) + goto err; + + if (onoff) { + buf[0] = 0x00; + buf[1] = 0x00; + gpio |= 0x04; /* LED on */ + } else { + buf[0] = 0x10; /* stall EPA */ + buf[1] = 0x02; /* reset EPA */ + gpio &= (~0x04); /* LED off */ + } + + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio); + if (ret) + goto err; + + ret = rtl2831_wr_regs(adap->dev, USB_EPA_CTL, buf, 2); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 gpio, sys0; + + deb_info("%s: onoff=%d\n", __func__, onoff); + + /* demod adc */ + ret = rtl2831_rd_reg(d, SYS_SYS0, &sys0); + if (ret) + goto err; + + /* tuner power, read GPIOs */ + ret = rtl2831_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); + if (ret) + goto err; + + deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + + if (onoff) { + gpio |= 0x01; /* GPIO0 = 1 */ + gpio &= (~0x10); /* GPIO4 = 0 */ + sys0 = sys0 & 0x0f; + sys0 |= 0xe0; + } else { + gpio &= (~0x01); /* GPIO0 = 0 */ + gpio |= 0x10; /* GPIO4 = 1 */ + sys0 = sys0 & (~0xc0); + } + + deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); + + /* demod adc */ + ret = rtl2831_wr_reg(d, SYS_SYS0, sys0); + if (ret) + goto err; + + /* tuner power, write GPIOs */ + ret = rtl2831_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2831u_rc_query(struct dvb_usb_device *d) +{ + int ret, i; + struct rtl28xxu_priv *priv = d->priv; + u8 buf[5]; + u32 rc_code; + struct rtl28xxu_reg_val rc_nec_tab[] = { + { 0x3033, 0x80 }, + { 0x3020, 0x43 }, + { 0x3021, 0x16 }, + { 0x3022, 0x16 }, + { 0x3023, 0x5a }, + { 0x3024, 0x2d }, + { 0x3025, 0x16 }, + { 0x3026, 0x01 }, + { 0x3028, 0xb0 }, + { 0x3029, 0x04 }, + { 0x302c, 0x88 }, + { 0x302e, 0x13 }, + { 0x3030, 0xdf }, + { 0x3031, 0x05 }, + }; + + /* init remote controller */ + if (!priv->rc_active) { + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, + rc_nec_tab[i].val); + if (ret) + goto err; + } + priv->rc_active = true; + } + + ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); + if (ret) + goto err; + + if (buf[4] & 0x01) { + if (buf[2] == (u8) ~buf[3]) { + if (buf[0] == (u8) ~buf[1]) { + /* NEC standard (16 bit) */ + rc_code = buf[0] << 8 | buf[2]; + } else { + /* NEC extended (24 bit) */ + rc_code = buf[0] << 16 | + buf[1] << 8 | buf[2]; + } + } else { + /* NEC full (32 bit) */ + rc_code = buf[0] << 24 | buf[1] << 16 | + buf[2] << 8 | buf[3]; + } + + rc_keydown(d->rc_dev, rc_code, 0); + + ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1); + if (ret) + goto err; + + /* repeated intentionally to avoid extra keypress */ + ret = rtl2831_wr_reg(d, SYS_IRRC_SR, 1); + if (ret) + goto err; + } + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static int rtl2832u_rc_query(struct dvb_usb_device *d) +{ + int ret, i; + struct rtl28xxu_priv *priv = d->priv; + u8 buf[128]; + int len; + struct rtl28xxu_reg_val rc_nec_tab[] = { + { IR_RX_CTRL, 0x20 }, + { IR_RX_BUF_CTRL, 0x80 }, + { IR_RX_IF, 0xff }, + { IR_RX_IE, 0xff }, + { IR_MAX_DURATION0, 0xd0 }, + { IR_MAX_DURATION1, 0x07 }, + { IR_IDLE_LEN0, 0xc0 }, + { IR_IDLE_LEN1, 0x00 }, + { IR_GLITCH_LEN, 0x03 }, + { IR_RX_CLK, 0x09 }, + { IR_RX_CFG, 0x1c }, + { IR_MAX_H_TOL_LEN, 0x1e }, + { IR_MAX_L_TOL_LEN, 0x1e }, + { IR_RX_CTRL, 0x80 }, + }; + + /* init remote controller */ + if (!priv->rc_active) { + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, + rc_nec_tab[i].val); + if (ret) + goto err; + } + priv->rc_active = true; + } + + ret = rtl2831_rd_reg(d, IR_RX_IF, &buf[0]); + if (ret) + goto err; + + if (buf[0] != 0x83) + goto exit; + + ret = rtl2831_rd_reg(d, IR_RX_BC, &buf[0]); + if (ret) + goto err; + + len = buf[0]; + ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); + + /* TODO: pass raw IR to Kernel IR decoder */ + + ret = rtl2831_wr_reg(d, IR_RX_IF, 0x03); + ret = rtl2831_wr_reg(d, IR_RX_BUF_CTRL, 0x80); + ret = rtl2831_wr_reg(d, IR_RX_CTRL, 0x80); + +exit: + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +enum rtl28xxu_usb_table_entry { + RTL2831U_0BDA_2831, + RTL2831U_14AA_0160, + RTL2831U_14AA_0161, +}; + +static struct usb_device_id rtl28xxu_table[] = { + /* RTL2831U */ + [RTL2831U_0BDA_2831] = { + USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)}, + [RTL2831U_14AA_0160] = { + USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)}, + [RTL2831U_14AA_0161] = { + USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)}, + + /* RTL2832U */ + {} /* terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, rtl28xxu_table); + +static struct dvb_usb_device_properties rtl28xxu_properties[] = { + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = { + { + .frontend_attach = rtl2831u_frontend_attach, + .tuner_attach = rtl2831u_tuner_attach, + .streaming_ctrl = rtl28xxu_streaming_ctrl, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 8*512, + } + } + } + } + } + } + }, + + .power_ctrl = rtl28xxu_power_ctrl, + + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "rtl28xxu", + .rc_query = rtl2831u_rc_query, + .rc_interval = 400, + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_EMPTY, + }, + + .i2c_algo = &rtl28xxu_i2c_algo, + + .num_device_descs = 2, + .devices = { + { + .name = "Realtek RTL2831U reference design", + .warm_ids = { + &rtl28xxu_table[RTL2831U_0BDA_2831], + }, + }, + { + .name = "Freecom USB2.0 DVB-T", + .warm_ids = { + &rtl28xxu_table[RTL2831U_14AA_0160], + &rtl28xxu_table[RTL2831U_14AA_0161], + }, + }, + } + }, + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = { + { + .frontend_attach = rtl2832u_frontend_attach, + .tuner_attach = rtl2832u_tuner_attach, + .streaming_ctrl = rtl28xxu_streaming_ctrl, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 8*512, + } + } + } + } + } + } + }, + + .power_ctrl = rtl28xxu_power_ctrl, + + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "rtl28xxu", + .rc_query = rtl2832u_rc_query, + .rc_interval = 400, + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_EMPTY, + }, + + .i2c_algo = &rtl28xxu_i2c_algo, + + .num_device_descs = 0, /* disabled as no support for RTL2832 */ + .devices = { + { + .name = "Realtek RTL2832U reference design", + }, + } + }, + +}; + +static int rtl28xxu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret, i; + int properties_count = ARRAY_SIZE(rtl28xxu_properties); + struct dvb_usb_device *d; + + deb_info("%s: interface=%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return 0; + + for (i = 0; i < properties_count; i++) { + ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i], + THIS_MODULE, &d, adapter_nr); + if (ret == 0 || ret != -ENODEV) + break; + } + + if (ret) + goto err; + + /* init USB endpoints */ + ret = rtl2831_wr_reg(d, USB_SYSCTL_0, 0x09); + if (ret) + goto err; + + ret = rtl2831_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); + if (ret) + goto err; + + ret = rtl2831_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); + if (ret) + goto err; + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + +static struct usb_driver rtl28xxu_driver = { + .name = "dvb_usb_rtl28xxu", + .probe = rtl28xxu_probe, + .disconnect = dvb_usb_device_exit, + .id_table = rtl28xxu_table, +}; + +/* module stuff */ +static int __init rtl28xxu_module_init(void) +{ + int ret; + + deb_info("%s:\n", __func__); + + ret = usb_register(&rtl28xxu_driver); + if (ret) + err("usb_register failed=%d", ret); + + return ret; +} + +static void __exit rtl28xxu_module_exit(void) +{ + deb_info("%s:\n", __func__); + + /* deregister this driver from the USB subsystem */ + usb_deregister(&rtl28xxu_driver); +} + +module_init(rtl28xxu_module_init); +module_exit(rtl28xxu_module_exit); + +MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h new file mode 100644 index 000000000000..90f3bb4f4c0e --- /dev/null +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h @@ -0,0 +1,264 @@ +/* + * Realtek RTL28xxU DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL28XXU_H +#define RTL28XXU_H + +#define DVB_USB_LOG_PREFIX "rtl28xxu" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args) + +#define deb_dump(r, t, v, i, b, l, func) { \ + int loop_; \ + func("%02x %02x %02x %02x %02x %02x %02x %02x", \ + t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ + if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ + func(" >>> "); \ + else \ + func(" <<< "); \ + for (loop_ = 0; loop_ < l; loop_++) \ + func("%02x ", b[loop_]); \ + func("\n");\ +} + +/* + * USB commands + * (usb_control_msg() index parameter) + */ + +#define DEMOD 0x0000 +#define USB 0x0100 +#define SYS 0x0200 +#define I2C 0x0300 +#define I2C_DA 0x0600 + +#define CMD_WR_FLAG 0x0010 +#define CMD_DEMOD_RD 0x0000 +#define CMD_DEMOD_WR 0x0010 +#define CMD_USB_RD 0x0100 +#define CMD_USB_WR 0x0110 +#define CMD_SYS_RD 0x0200 +#define CMD_IR_RD 0x0201 +#define CMD_IR_WR 0x0211 +#define CMD_SYS_WR 0x0210 +#define CMD_I2C_RD 0x0300 +#define CMD_I2C_WR 0x0310 +#define CMD_I2C_DA_RD 0x0600 +#define CMD_I2C_DA_WR 0x0610 + + +struct rtl28xxu_priv { + u8 chip_id; + u8 tuner; + u8 page; /* integrated demod active register page */ + bool rc_active; +}; + +enum rtl28xxu_chip_id { + CHIP_ID_NONE, + CHIP_ID_RTL2831U, + CHIP_ID_RTL2832U, +}; + +enum rtl28xxu_tuner { + TUNER_NONE, + + TUNER_RTL2830_QT1010, + TUNER_RTL2830_MT2060, + TUNER_RTL2830_MXL5005S, + + TUNER_RTL2832_MT2266, + TUNER_RTL2832_FC2580, + TUNER_RTL2832_MT2063, + TUNER_RTL2832_MAX3543, + TUNER_RTL2832_TUA9001, + TUNER_RTL2832_MXL5007T, + TUNER_RTL2832_FC0012, + TUNER_RTL2832_E4000, + TUNER_RTL2832_TDA18272, + TUNER_RTL2832_FC0013, +}; + +struct rtl28xxu_req { + u16 value; + u16 index; + u16 size; + u8 *data; +}; + +struct rtl28xxu_reg_val { + u16 reg; + u8 val; +}; + +/* + * memory map + * + * 0x0000 DEMOD : demodulator + * 0x2000 USB : SIE, USB endpoint, debug, DMA + * 0x3000 SYS : system + * 0xfc00 RC : remote controller (not RTL2831U) + */ + +/* + * USB registers + */ +/* SIE Control Registers */ +#define USB_SYSCTL 0x2000 /* USB system control */ +#define USB_SYSCTL_0 0x2000 /* USB system control */ +#define USB_SYSCTL_1 0x2001 /* USB system control */ +#define USB_SYSCTL_2 0x2002 /* USB system control */ +#define USB_SYSCTL_3 0x2003 /* USB system control */ +#define USB_IRQSTAT 0x2008 /* SIE interrupt status */ +#define USB_IRQEN 0x200C /* SIE interrupt enable */ +#define USB_CTRL 0x2010 /* USB control */ +#define USB_STAT 0x2014 /* USB status */ +#define USB_DEVADDR 0x2018 /* USB device address */ +#define USB_TEST 0x201C /* USB test mode */ +#define USB_FRAME_NUMBER 0x2020 /* frame number */ +#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */ +#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */ +#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */ +/* Endpoint Registers */ +#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */ +#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */ +#define USB_EP0_CFG 0x2104 /* EP 0 configure */ +#define USB_EP0_CTL 0x2108 /* EP 0 control */ +#define USB_EP0_STAT 0x210C /* EP 0 status */ +#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */ +#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */ +#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */ +#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */ +#define USB_EPA_CFG 0x2144 /* EP A configure */ +#define USB_EPA_CFG_0 0x2144 /* EP A configure */ +#define USB_EPA_CFG_1 0x2145 /* EP A configure */ +#define USB_EPA_CFG_2 0x2146 /* EP A configure */ +#define USB_EPA_CFG_3 0x2147 /* EP A configure */ +#define USB_EPA_CTL 0x2148 /* EP A control */ +#define USB_EPA_CTL_0 0x2148 /* EP A control */ +#define USB_EPA_CTL_1 0x2149 /* EP A control */ +#define USB_EPA_CTL_2 0x214A /* EP A control */ +#define USB_EPA_CTL_3 0x214B /* EP A control */ +#define USB_EPA_STAT 0x214C /* EP A status */ +#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */ +#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */ +#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */ +#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */ +#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */ +#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */ +#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */ +#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */ +/* Debug Registers */ +#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */ +#define USB_TOUT_VAL 0x2F08 /* USB time-out time */ +#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */ +#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */ +#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */ +#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */ +#define USB_UTMI_TST 0x2F80 /* UTMI test */ +#define USB_UTMI_STATUS 0x2F84 /* UTMI status */ +#define USB_TSTCTL 0x2F88 /* test control */ +#define USB_TSTCTL2 0x2F8C /* test control 2 */ +#define USB_PID_FORCE 0x2F90 /* force PID */ +#define USB_PKTERR_CNT 0x2F94 /* packet error counter */ +#define USB_RXERR_CNT 0x2F98 /* RX error counter */ +#define USB_MEM_BIST 0x2F9C /* MEM BIST test */ +#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */ +#define USB_CNTTEST 0x2FA4 /* counter test */ +#define USB_PHYTST 0x2FC0 /* USB PHY test */ +#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */ +#define USB_DBGMUX 0x2FF4 /* debug signal module mux */ + +/* + * SYS registers + */ +/* demod control registers */ +#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */ +#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */ +/* GPIO registers */ +#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */ +#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */ +#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */ +#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */ +#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */ +#define SYS_SYSINTE 0x3005 /* system interrupt enable */ +#define SYS_SYSINTS 0x3006 /* system interrupt status */ +#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */ +#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */ +#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */ +#define SYS_DEMOD_CTL1 0x300B + +/* IrDA registers */ +#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */ +#define SYS_IRRC_PER 0x3024 /* IR protocol extension */ +#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */ +#define SYS_IRRC_DPIR 0x302C /* IR data package interval */ +#define SYS_IRRC_CR 0x3030 /* IR control */ +#define SYS_IRRC_RP 0x3034 /* IR read port */ +#define SYS_IRRC_SR 0x3038 /* IR status */ +/* I2C master registers */ +#define SYS_I2CCR 0x3040 /* I2C clock */ +#define SYS_I2CMCR 0x3044 /* I2C master control */ +#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */ +#define SYS_I2CMSR 0x304C /* I2C master status */ +#define SYS_I2CMFR 0x3050 /* I2C master FIFO */ + +/* + * IR registers + */ +#define IR_RX_BUF 0xFC00 +#define IR_RX_IE 0xFD00 +#define IR_RX_IF 0xFD01 +#define IR_RX_CTRL 0xFD02 +#define IR_RX_CFG 0xFD03 +#define IR_MAX_DURATION0 0xFD04 +#define IR_MAX_DURATION1 0xFD05 +#define IR_IDLE_LEN0 0xFD06 +#define IR_IDLE_LEN1 0xFD07 +#define IR_GLITCH_LEN 0xFD08 +#define IR_RX_BUF_CTRL 0xFD09 +#define IR_RX_BUF_DATA 0xFD0A +#define IR_RX_BC 0xFD0B +#define IR_RX_CLK 0xFD0C +#define IR_RX_C_COUNT_L 0xFD0D +#define IR_RX_C_COUNT_H 0xFD0E +#define IR_SUSPEND_CTRL 0xFD10 +#define IR_ERR_TOL_CTRL 0xFD11 +#define IR_UNIT_LEN 0xFD12 +#define IR_ERR_TOL_LEN 0xFD13 +#define IR_MAX_H_TOL_LEN 0xFD14 +#define IR_MAX_L_TOL_LEN 0xFD15 +#define IR_MASK_CTRL 0xFD16 +#define IR_MASK_DATA 0xFD17 +#define IR_RES_MASK_ADDR 0xFD18 +#define IR_RES_MASK_T_LEN 0xFD19 + +#endif diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index ebb5ed7a7783..21246707fbfb 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -425,6 +425,13 @@ config DVB_CXD2820R help Say Y when you want to support this frontend. +config DVB_RTL2830 + tristate "Realtek RTL2830 DVB-T" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Say Y when you want to support this frontend. + comment "DVB-C (cable) frontends" depends on DVB_CORE @@ -698,6 +705,14 @@ config DVB_IT913X_FE A DVB-T tuner module. Say Y when you want to support this frontend. +config DVB_M88RS2000 + tristate "M88RS2000 DVB-S demodulator and tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. + Say Y when you want to support this frontend. + comment "Tools to develop new frontends" config DVB_DUMMY_FE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 00a20636df62..86fa808bf589 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -2,8 +2,8 @@ # Makefile for the kernel DVB frontend device drivers. # -ccflags-y += -Idrivers/media/dvb/dvb-core/ -ccflags-y += -Idrivers/media/common/tuners/ +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core/ +ccflags-y += -I$(srctree)/drivers/media/common/tuners/ stb0899-objs = stb0899_drv.o stb0899_algo.o stv0900-objs = stv0900_core.o stv0900_sw.o @@ -96,4 +96,6 @@ obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o obj-$(CONFIG_DVB_A8293) += a8293.o obj-$(CONFIG_DVB_TDA10071) += tda10071.o +obj-$(CONFIG_DVB_RTL2830) += rtl2830.o +obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index 2b248c12f404..55b6390198e3 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -839,15 +839,4 @@ static struct i2c_driver au8522_driver = { .id_table = au8522_id, }; -static __init int init_au8522(void) -{ - return i2c_add_driver(&au8522_driver); -} - -static __exit void exit_au8522(void) -{ - i2c_del_driver(&au8522_driver); -} - -module_init(init_au8522); -module_exit(exit_au8522); +module_i2c_driver(au8522_driver); diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c index c688b95df486..25f650934c73 100644 --- a/drivers/media/dvb/frontends/au8522_dig.c +++ b/drivers/media/dvb/frontends/au8522_dig.c @@ -588,11 +588,6 @@ static int au8522_set_frontend(struct dvb_frontend *fe) (state->current_modulation == c->modulation)) return 0; - au8522_enable_modulation(fe, c->modulation); - - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -604,6 +599,11 @@ static int au8522_set_frontend(struct dvb_frontend *fe) if (ret < 0) return ret; + /* Allow the tuner to settle */ + msleep(100); + + au8522_enable_modulation(fe, c->modulation); + state->current_frequency = c->frequency; return 0; diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index faba82485086..edc8eafc5c09 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -502,10 +502,26 @@ static int cx22702_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { struct cx22702_state *state = fe->demodulator_priv; + u8 reg23; - u16 rs_ber; - rs_ber = cx22702_readreg(state, 0x23); - *signal_strength = (rs_ber << 8) | rs_ber; + /* + * Experience suggests that the strength signal register works as + * follows: + * - In the absence of signal, value is 0xff. + * - In the presence of a weak signal, bit 7 is set, not sure what + * the lower 7 bits mean. + * - In the presence of a strong signal, the register holds a 7-bit + * value (bit 7 is cleared), with greater values standing for + * weaker signals. + */ + reg23 = cx22702_readreg(state, 0x23); + if (reg23 & 0x80) { + *signal_strength = 0; + } else { + reg23 = ~reg23 & 0x7f; + /* Scale to 16 bit */ + *signal_strength = (reg23 << 9) | (reg23 << 2) | (reg23 >> 5); + } return 0; } diff --git a/drivers/media/dvb/frontends/dib0090.c b/drivers/media/dvb/frontends/dib0090.c index 224d81e85091..d9fe60b4be48 100644 --- a/drivers/media/dvb/frontends/dib0090.c +++ b/drivers/media/dvb/frontends/dib0090.c @@ -519,7 +519,7 @@ static int dib0090_fw_identify(struct dvb_frontend *fe) return 0; identification_error: - return -EIO;; + return -EIO; } static void dib0090_reset_digital(struct dvb_frontend *fe, const struct dib0090_config *cfg) diff --git a/drivers/media/dvb/frontends/dib9000.c b/drivers/media/dvb/frontends/dib9000.c index 863ef3cfab9f..80848b4c15d4 100644 --- a/drivers/media/dvb/frontends/dib9000.c +++ b/drivers/media/dvb/frontends/dib9000.c @@ -33,7 +33,7 @@ struct i2c_device { /* lock */ #define DIB_LOCK struct mutex -#define DibAcquireLock(lock) do { if (mutex_lock_interruptible(lock) < 0) dprintk("could not get the lock"); } while (0) +#define DibAcquireLock(lock) mutex_lock_interruptible(lock) #define DibReleaseLock(lock) mutex_unlock(lock) #define DibInitLock(lock) mutex_init(lock) #define DibFreeLock(lock) @@ -446,7 +446,10 @@ static int dib9000_risc_mem_read(struct dib9000_state *state, u8 cmd, u8 * b, u1 if (!state->platform.risc.fw_is_running) return -EIO; - DibAcquireLock(&state->platform.risc.mem_lock); + if (DibAcquireLock(&state->platform.risc.mem_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } dib9000_risc_mem_setup(state, cmd | 0x80); dib9000_risc_mem_read_chunks(state, b, len); DibReleaseLock(&state->platform.risc.mem_lock); @@ -459,7 +462,10 @@ static int dib9000_risc_mem_write(struct dib9000_state *state, u8 cmd, const u8 if (!state->platform.risc.fw_is_running) return -EIO; - DibAcquireLock(&state->platform.risc.mem_lock); + if (DibAcquireLock(&state->platform.risc.mem_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } dib9000_risc_mem_setup(state, cmd); dib9000_risc_mem_write_chunks(state, b, m->size); DibReleaseLock(&state->platform.risc.mem_lock); @@ -531,7 +537,10 @@ static int dib9000_mbx_send_attr(struct dib9000_state *state, u8 id, u16 * data, if (!state->platform.risc.fw_is_running) return -EINVAL; - DibAcquireLock(&state->platform.risc.mbx_if_lock); + if (DibAcquireLock(&state->platform.risc.mbx_if_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } tmp = MAX_MAILBOX_TRY; do { size = dib9000_read_word_attr(state, 1043, attr) & 0xff; @@ -593,7 +602,10 @@ static u8 dib9000_mbx_read(struct dib9000_state *state, u16 * data, u8 risc_id, if (!state->platform.risc.fw_is_running) return 0; - DibAcquireLock(&state->platform.risc.mbx_if_lock); + if (DibAcquireLock(&state->platform.risc.mbx_if_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } if (risc_id == 1) mc_base = 16; else @@ -701,7 +713,10 @@ static int dib9000_mbx_process(struct dib9000_state *state, u16 attr) if (!state->platform.risc.fw_is_running) return -1; - DibAcquireLock(&state->platform.risc.mbx_lock); + if (DibAcquireLock(&state->platform.risc.mbx_lock) < 0) { + dprintk("could not get the lock"); + return -1; + } if (dib9000_mbx_count(state, 1, attr)) /* 1=RiscB */ ret = dib9000_mbx_fetch_to_cache(state, attr); @@ -1178,7 +1193,10 @@ static int dib9000_fw_get_channel(struct dvb_frontend *fe) struct dibDVBTChannel *ch; int ret = 0; - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { ret = -EIO; goto error; @@ -1660,7 +1678,10 @@ static int dib9000_fw_component_bus_xfer(struct i2c_adapter *i2c_adap, struct i2 p[12] = 0; } - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } dib9000_risc_mem_write(state, FE_MM_W_COMPONENT_ACCESS, p); @@ -1768,7 +1789,10 @@ int dib9000_fw_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) return 0; } - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } val = dib9000_read_word(state, 294 + 1) & 0xffef; val |= (onoff & 0x1) << 4; @@ -1800,7 +1824,10 @@ int dib9000_fw_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) return 0; } - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff); ret = dib9000_write_word(state, 300 + 1 + id, onoff ? (1 << 13) | pid : 0); @@ -1848,7 +1875,10 @@ static int dib9000_sleep(struct dvb_frontend *fe) u8 index_frontend; int ret = 0; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]); if (ret < 0) @@ -1874,8 +1904,12 @@ static int dib9000_get_frontend(struct dvb_frontend *fe) fe_status_t stat; int ret = 0; - if (state->get_frontend_internal == 0) - DibAcquireLock(&state->demod_lock); + if (state->get_frontend_internal == 0) { + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + } for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat); @@ -1978,7 +2012,10 @@ static int dib9000_set_frontend(struct dvb_frontend *fe) } state->pid_ctrl_index = -1; /* postpone the pid filtering cmd */ - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } fe->dtv_property_cache.delivery_system = SYS_DVBT; @@ -2138,7 +2175,10 @@ static int dib9000_read_status(struct dvb_frontend *fe, fe_status_t * stat) u8 index_frontend; u16 lock = 0, lock_slave = 0; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) lock_slave |= dib9000_read_lock(state->fe[index_frontend]); @@ -2168,8 +2208,15 @@ static int dib9000_read_ber(struct dvb_frontend *fe, u32 * ber) u16 *c; int ret = 0; - DibAcquireLock(&state->demod_lock); - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { DibReleaseLock(&state->platform.risc.mem_mbx_lock); ret = -EIO; @@ -2196,7 +2243,10 @@ static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) u16 val; int ret = 0; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } *strength = 0; for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val); @@ -2206,8 +2256,13 @@ static int dib9000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) *strength += val; } - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + DibReleaseLock(&state->platform.risc.mem_mbx_lock); ret = -EIO; goto error; } @@ -2232,9 +2287,14 @@ static u32 dib9000_get_snr(struct dvb_frontend *fe) u32 n, s, exp; u16 val; - DibAcquireLock(&state->platform.risc.mem_mbx_lock); - if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) - return -EIO; + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + return 0; + } + if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + DibReleaseLock(&state->platform.risc.mem_mbx_lock); + return 0; + } dib9000_risc_mem_read(state, FE_MM_R_FE_MONITOR, (u8 *) c, 16 * 2); DibReleaseLock(&state->platform.risc.mem_mbx_lock); @@ -2266,7 +2326,10 @@ static int dib9000_read_snr(struct dvb_frontend *fe, u16 * snr) u8 index_frontend; u32 snr_master; - DibAcquireLock(&state->demod_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } snr_master = dib9000_get_snr(fe); for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) snr_master += dib9000_get_snr(state->fe[index_frontend]); @@ -2288,9 +2351,17 @@ static int dib9000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) u16 *c = (u16 *)state->i2c_read_buffer; int ret = 0; - DibAcquireLock(&state->demod_lock); - DibAcquireLock(&state->platform.risc.mem_mbx_lock); + if (DibAcquireLock(&state->demod_lock) < 0) { + dprintk("could not get the lock"); + return -EINTR; + } + if (DibAcquireLock(&state->platform.risc.mem_mbx_lock) < 0) { + dprintk("could not get the lock"); + ret = -EINTR; + goto error; + } if (dib9000_fw_memmbx_sync(state, FE_SYNC_CHANNEL) < 0) { + DibReleaseLock(&state->platform.risc.mem_mbx_lock); ret = -EIO; goto error; } diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c index 7bf39cda83c5..f380eb43e9d5 100644 --- a/drivers/media/dvb/frontends/drxd_hard.c +++ b/drivers/media/dvb/frontends/drxd_hard.c @@ -101,9 +101,9 @@ struct SCfgAgc { struct SNoiseCal { int cpOpt; - u16 cpNexpOfs; - u16 tdCal2k; - u16 tdCal8k; + short cpNexpOfs; + short tdCal2k; + short tdCal8k; }; enum app_env { diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h index 020981844a86..9d64e4fea066 100644 --- a/drivers/media/dvb/frontends/drxk.h +++ b/drivers/media/dvb/frontends/drxk.h @@ -7,15 +7,19 @@ /** * struct drxk_config - Configure the initial parameters for DRX-K * - * adr: I2C Address of the DRX-K - * parallel_ts: true means that the device uses parallel TS, + * @adr: I2C Address of the DRX-K + * @parallel_ts: True means that the device uses parallel TS, * Serial otherwise. - * single_master: Device is on the single master mode - * no_i2c_bridge: Don't switch the I2C bridge to talk with tuner - * antenna_gpio: GPIO bit used to control the antenna - * antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 + * @dynamic_clk: True means that the clock will be dynamically + * adjusted. Static clock otherwise. + * @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG. + * @single_master: Device is on the single master mode + * @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner + * @antenna_gpio: GPIO bit used to control the antenna + * @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 * means that 1=DVBC, 0 = DVBT. Zero means the opposite. - * microcode_name: Name of the firmware file with the microcode + * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength. + * @microcode_name: Name of the firmware file with the microcode * * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is * UIO-3. @@ -25,11 +29,14 @@ struct drxk_config { bool single_master; bool no_i2c_bridge; bool parallel_ts; + bool dynamic_clk; + bool enable_merr_cfg; bool antenna_dvbt; u16 antenna_gpio; - int chunk_size; + u8 mpeg_out_clk_strength; + int chunk_size; const char *microcode_name; }; diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 5ab53795bd7a..36d11756492f 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -90,10 +90,6 @@ bool IsA1WithRomCode(struct drxk_state *state) #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) #endif -#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH -#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06) -#endif - #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 @@ -649,9 +645,6 @@ static int init_state(struct drxk_state *state) u32 ulQual83 = DEFAULT_MER_83; u32 ulQual93 = DEFAULT_MER_93; - u32 ulDVBTStaticTSClock = 1; - u32 ulDVBCStaticTSClock = 1; - u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; @@ -661,7 +654,6 @@ static int init_state(struct drxk_state *state) u32 ulGPIOCfg = 0x0113; u32 ulInvertTSClock = 0; u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; - u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH; u32 ulDVBTBitrate = 50000000; u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; @@ -814,8 +806,7 @@ static int init_state(struct drxk_state *state) state->m_invertSTR = false; /* If TRUE; invert STR signals */ state->m_invertVAL = false; /* If TRUE; invert VAL signals */ state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */ - state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0); - state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0); + /* If TRUE; static MPEG clockrate will be used; otherwise clockrate will adapt to the bitrate of the TS */ @@ -823,7 +814,6 @@ static int init_state(struct drxk_state *state) state->m_DVBCBitrate = ulDVBCBitrate; state->m_TSDataStrength = (ulTSDataStrength & 0x07); - state->m_TSClockkStrength = (ulTSClockkStrength & 0x07); /* Maximum bitrate in b/s in case static clockrate is selected */ state->m_mpegTsStaticBitrate = 19392658; @@ -1188,6 +1178,7 @@ static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) int status = -1; u16 sioPdrMclkCfg = 0; u16 sioPdrMdxCfg = 0; + u16 err_cfg = 0; dprintk(1, ": mpeg %s, %s mode\n", mpegEnable ? "enable" : "disable", @@ -1253,12 +1244,17 @@ static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg); if (status < 0) goto error; - status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); /* Disable */ + + if (state->enable_merr_cfg) + err_cfg = sioPdrMdxCfg; + + status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg); if (status < 0) goto error; - status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); /* Disable */ + status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg); if (status < 0) goto error; + if (state->m_enableParallel == true) { /* paralel -> enable MD1 to MD7 */ status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg); @@ -6069,9 +6065,7 @@ static int init_drxk(struct drxk_state *state) if (status < 0) goto error; - if (!state->microcode_name) - load_microcode(state, "drxk_a3.mc"); - else + if (state->microcode_name) load_microcode(state, state->microcode_name); /* disable token-ring bus through OFDM block for possible ucode upload */ @@ -6322,15 +6316,12 @@ static int drxk_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_t switch (p->delivery_system) { case SYS_DVBC_ANNEX_A: case SYS_DVBC_ANNEX_C: + case SYS_DVBT: sets->min_delay_ms = 3000; sets->max_drift = 0; sets->step_size = 0; return 0; default: - /* - * For DVB-T, let it use the default DVB core way, that is: - * fepriv->step_size = fe->ops.info.frequency_stepsize * 2 - */ return -EINVAL; } } @@ -6390,6 +6381,21 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config, state->antenna_gpio = config->antenna_gpio; state->antenna_dvbt = config->antenna_dvbt; state->m_ChunkSize = config->chunk_size; + state->enable_merr_cfg = config->enable_merr_cfg; + + if (config->dynamic_clk) { + state->m_DVBTStaticCLK = 0; + state->m_DVBCStaticCLK = 0; + } else { + state->m_DVBTStaticCLK = 1; + state->m_DVBCStaticCLK = 1; + } + + + if (config->mpeg_out_clk_strength) + state->m_TSClockkStrength = config->mpeg_out_clk_strength & 0x07; + else + state->m_TSClockkStrength = 0x06; if (config->parallel_ts) state->m_enableParallel = true; diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h index 3a58b73eb9b9..4bbf841de83a 100644 --- a/drivers/media/dvb/frontends/drxk_hard.h +++ b/drivers/media/dvb/frontends/drxk_hard.h @@ -332,6 +332,7 @@ struct drxk_state { u16 UIO_mask; /* Bits used by UIO */ + bool enable_merr_cfg; bool single_master; bool no_i2c_bridge; bool antenna_dvbt; diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h index 93b086ea7e1c..eb6fd8aebdb3 100644 --- a/drivers/media/dvb/frontends/it913x-fe-priv.h +++ b/drivers/media/dvb/frontends/it913x-fe-priv.h @@ -201,6 +201,11 @@ fe_modulation_t fe_con[] = { QAM_64, }; +enum { + PRIORITY_HIGH = 0, /* High-priority stream */ + PRIORITY_LOW, /* Low-priority stream */ +}; + /* Standard demodulator functions */ static struct it913xset set_solo_fe[] = { {PRO_LINK, GPIOH5_EN, {0x01}, 0x01}, diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c index ccc36bf2deb4..84df03c29179 100644 --- a/drivers/media/dvb/frontends/it913x-fe.c +++ b/drivers/media/dvb/frontends/it913x-fe.c @@ -57,6 +57,7 @@ struct it913x_fe_state { u32 frequency; fe_modulation_t constellation; fe_transmit_mode_t transmission_mode; + u8 priority; u32 crystalFrequency; u32 adcFrequency; u8 tuner_type; @@ -500,19 +501,87 @@ static int it913x_fe_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; } +/* FEC values based on fe_code_rate_t non supported values 0*/ +int it913x_qpsk_pval[] = {0, -93, -91, -90, 0, -89, -88}; +int it913x_16qam_pval[] = {0, -87, -85, -84, 0, -83, -82}; +int it913x_64qam_pval[] = {0, -82, -80, -78, 0, -77, -76}; + +static int it913x_get_signal_strength(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct it913x_fe_state *state = fe->demodulator_priv; + u8 code_rate; + int ret, temp; + u8 lna_gain_os; + + ret = it913x_read_reg_u8(state, VAR_P_INBAND); + if (ret < 0) + return ret; + + /* VHF/UHF gain offset */ + if (state->frequency < 300000000) + lna_gain_os = 7; + else + lna_gain_os = 14; + + temp = (ret - 100) - lna_gain_os; + + if (state->priority == PRIORITY_HIGH) + code_rate = p->code_rate_HP; + else + code_rate = p->code_rate_LP; + + if (code_rate >= ARRAY_SIZE(it913x_qpsk_pval)) + return -EINVAL; + + deb_info("Reg VAR_P_INBAND:%d Calc Offset Value:%d", ret, temp); + + /* Apply FEC offset values*/ + switch (p->modulation) { + case QPSK: + temp -= it913x_qpsk_pval[code_rate]; + break; + case QAM_16: + temp -= it913x_16qam_pval[code_rate]; + break; + case QAM_64: + temp -= it913x_64qam_pval[code_rate]; + break; + default: + return -EINVAL; + } + + if (temp < -15) + ret = 0; + else if ((-15 <= temp) && (temp < 0)) + ret = (2 * (temp + 15)) / 3; + else if ((0 <= temp) && (temp < 20)) + ret = 4 * temp + 10; + else if ((20 <= temp) && (temp < 35)) + ret = (2 * (temp - 20)) / 3 + 90; + else if (temp >= 35) + ret = 100; + + deb_info("Signal Strength :%d", ret); + + return ret; +} + static int it913x_fe_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct it913x_fe_state *state = fe->demodulator_priv; - int ret = it913x_read_reg_u8(state, SIGNAL_LEVEL); - /*SIGNAL_LEVEL always returns 100%! so using FE_HAS_SIGNAL as switch*/ - if (state->it913x_status & FE_HAS_SIGNAL) - ret = (ret * 0xff) / 0x64; - else - ret = 0x0; - ret |= ret << 0x8; - *strength = ret; - return 0; + int ret = 0; + if (state->config->read_slevel) { + if (state->it913x_status & FE_HAS_SIGNAL) + ret = it913x_read_reg_u8(state, SIGNAL_LEVEL); + } else + ret = it913x_get_signal_strength(fe); + + if (ret >= 0) + *strength = (u16)((u32)ret * 0xffff / 0x64); + + return (ret < 0) ? -ENODEV : 0; } static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr) @@ -606,6 +675,8 @@ static int it913x_fe_get_frontend(struct dvb_frontend *fe) if (reg[2] < 4) p->hierarchy = fe_hi[reg[2]]; + state->priority = reg[5]; + p->code_rate_HP = (reg[6] < 6) ? fe_code[reg[6]] : FEC_NONE; p->code_rate_LP = (reg[7] < 6) ? fe_code[reg[7]] : FEC_NONE; @@ -972,5 +1043,5 @@ static struct dvb_frontend_ops it913x_fe_ofdm_ops = { MODULE_DESCRIPTION("it913x Frontend and it9137 tuner"); MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); -MODULE_VERSION("1.13"); +MODULE_VERSION("1.15"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h index c4a908e354e0..07fa4594c12b 100644 --- a/drivers/media/dvb/frontends/it913x-fe.h +++ b/drivers/media/dvb/frontends/it913x-fe.h @@ -34,6 +34,8 @@ struct ite_config { u8 tuner_id_1; u8 dual_mode; u8 adf; + /* option to read SIGNAL_LEVEL */ + u8 read_slevel; }; #if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \ @@ -168,6 +170,8 @@ static inline struct dvb_frontend *it913x_fe_attach( #define EST_SIGNAL_LEVEL 0x004a #define FREE_BAND 0x004b #define SUSPEND_FLAG 0x004c +#define VAR_P_INBAND 0x00f7 + /* Build in tuner types */ #define IT9137 0x38 #define IT9135_38 0x38 diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index c990d35a13dc..e046622df0e4 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -104,8 +104,8 @@ static int i2c_write_demod_bytes (struct lgdt330x_state* state, * then reads the data returned for (len) bytes. */ -static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, - enum I2C_REG reg, u8* buf, int len) +static int i2c_read_demod_bytes(struct lgdt330x_state *state, + enum I2C_REG reg, u8 *buf, int len) { u8 wr [] = { reg }; struct i2c_msg msg [] = { @@ -118,6 +118,8 @@ static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret); + if (ret >= 0) + ret = -EIO; } else { ret = 0; } diff --git a/drivers/media/dvb/frontends/m88rs2000.c b/drivers/media/dvb/frontends/m88rs2000.c new file mode 100644 index 000000000000..045ee5a6f7ae --- /dev/null +++ b/drivers/media/dvb/frontends/m88rs2000.c @@ -0,0 +1,904 @@ +/* + Driver for M88RS2000 demodulator and tuner + + Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + Beta Driver + + Include various calculation code from DS3000 driver. + Copyright (C) 2009 Konstantin Dimitrov. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/types.h> + + +#include "dvb_frontend.h" +#include "m88rs2000.h" + +struct m88rs2000_state { + struct i2c_adapter *i2c; + const struct m88rs2000_config *config; + struct dvb_frontend frontend; + u8 no_lock_count; + u32 tuner_frequency; + u32 symbol_rate; + fe_code_rate_t fec_inner; + u8 tuner_level; + int errmode; +}; + +static int m88rs2000_debug; + +module_param_named(debug, m88rs2000_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); + +#define dprintk(level, args...) do { \ + if (level & m88rs2000_debug) \ + printk(KERN_DEBUG "m88rs2000-fe: " args); \ +} while (0) + +#define deb_info(args...) dprintk(0x01, args) +#define info(format, arg...) \ + printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg) + +static int m88rs2000_writereg(struct m88rs2000_state *state, u8 tuner, + u8 reg, u8 data) +{ + int ret; + u8 addr = (tuner == 0) ? state->config->tuner_addr : + state->config->demod_addr; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = addr, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, " + "ret == %i)\n", __func__, reg, data, ret); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int m88rs2000_demod_write(struct m88rs2000_state *state, u8 reg, u8 data) +{ + return m88rs2000_writereg(state, 1, reg, data); +} + +static int m88rs2000_tuner_write(struct m88rs2000_state *state, u8 reg, u8 data) +{ + m88rs2000_demod_write(state, 0x81, 0x84); + udelay(10); + return m88rs2000_writereg(state, 0, reg, data); + +} + +static int m88rs2000_write(struct dvb_frontend *fe, const u8 buf[], int len) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + if (len != 2) + return -EINVAL; + + return m88rs2000_writereg(state, 1, buf[0], buf[1]); +} + +static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 tuner, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + u8 addr = (tuner == 0) ? state->config->tuner_addr : + state->config->demod_addr; + struct i2c_msg msg[] = { + { + .addr = addr, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + deb_info("%s: readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); + + return b1[0]; +} + +static u8 m88rs2000_demod_read(struct m88rs2000_state *state, u8 reg) +{ + return m88rs2000_readreg(state, 1, reg); +} + +static u8 m88rs2000_tuner_read(struct m88rs2000_state *state, u8 reg) +{ + m88rs2000_demod_write(state, 0x81, 0x85); + udelay(10); + return m88rs2000_readreg(state, 0, reg); +} + +static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + u32 temp; + u8 b[3]; + + if ((srate < 1000000) || (srate > 45000000)) + return -EINVAL; + + temp = srate / 1000; + temp *= 11831; + temp /= 68; + temp -= 3; + + b[0] = (u8) (temp >> 16) & 0xff; + b[1] = (u8) (temp >> 8) & 0xff; + b[2] = (u8) temp & 0xff; + ret = m88rs2000_demod_write(state, 0x93, b[2]); + ret |= m88rs2000_demod_write(state, 0x94, b[1]); + ret |= m88rs2000_demod_write(state, 0x95, b[0]); + + deb_info("m88rs2000: m88rs2000_set_symbolrate\n"); + return ret; +} + +static int m88rs2000_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *m) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + int i; + u8 reg; + deb_info("%s\n", __func__); + m88rs2000_demod_write(state, 0x9a, 0x30); + reg = m88rs2000_demod_read(state, 0xb2); + reg &= 0x3f; + m88rs2000_demod_write(state, 0xb2, reg); + for (i = 0; i < m->msg_len; i++) + m88rs2000_demod_write(state, 0xb3 + i, m->msg[i]); + + reg = m88rs2000_demod_read(state, 0xb1); + reg &= 0x87; + reg |= ((m->msg_len - 1) << 3) | 0x07; + reg &= 0x7f; + m88rs2000_demod_write(state, 0xb1, reg); + + for (i = 0; i < 15; i++) { + if ((m88rs2000_demod_read(state, 0xb1) & 0x40) == 0x0) + break; + msleep(20); + } + + reg = m88rs2000_demod_read(state, 0xb1); + if ((reg & 0x40) > 0x0) { + reg &= 0x7f; + reg |= 0x40; + m88rs2000_demod_write(state, 0xb1, reg); + } + + reg = m88rs2000_demod_read(state, 0xb2); + reg &= 0x3f; + reg |= 0x80; + m88rs2000_demod_write(state, 0xb2, reg); + m88rs2000_demod_write(state, 0x9a, 0xb0); + + + return 0; +} + +static int m88rs2000_send_diseqc_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg0, reg1; + deb_info("%s\n", __func__); + m88rs2000_demod_write(state, 0x9a, 0x30); + msleep(50); + reg0 = m88rs2000_demod_read(state, 0xb1); + reg1 = m88rs2000_demod_read(state, 0xb2); + /* TODO complete this section */ + m88rs2000_demod_write(state, 0xb2, reg1); + m88rs2000_demod_write(state, 0xb1, reg0); + m88rs2000_demod_write(state, 0x9a, 0xb0); + + return 0; +} + +static int m88rs2000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg0, reg1; + m88rs2000_demod_write(state, 0x9a, 0x30); + reg0 = m88rs2000_demod_read(state, 0xb1); + reg1 = m88rs2000_demod_read(state, 0xb2); + + reg1 &= 0x3f; + + switch (tone) { + case SEC_TONE_ON: + reg0 |= 0x4; + reg0 &= 0xbc; + break; + case SEC_TONE_OFF: + reg1 |= 0x80; + break; + default: + break; + } + m88rs2000_demod_write(state, 0xb2, reg1); + m88rs2000_demod_write(state, 0xb1, reg0); + m88rs2000_demod_write(state, 0x9a, 0xb0); + return 0; +} + +struct inittab { + u8 cmd; + u8 reg; + u8 val; +}; + +struct inittab m88rs2000_setup[] = { + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0x00, 0x01}, + {WRITE_DELAY, 0x19, 0x00}, + {DEMOD_WRITE, 0x00, 0x00}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {DEMOD_WRITE, 0x81, 0xc1}, + {TUNER_WRITE, 0x42, 0x73}, + {TUNER_WRITE, 0x05, 0x07}, + {TUNER_WRITE, 0x20, 0x27}, + {TUNER_WRITE, 0x07, 0x02}, + {TUNER_WRITE, 0x11, 0xff}, + {TUNER_WRITE, 0x60, 0xf9}, + {TUNER_WRITE, 0x08, 0x01}, + {TUNER_WRITE, 0x00, 0x41}, + {DEMOD_WRITE, 0x81, 0x81}, + {DEMOD_WRITE, 0x86, 0xc6}, + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0xf0, 0x22}, + {DEMOD_WRITE, 0xf1, 0xbf}, + {DEMOD_WRITE, 0xb0, 0x45}, + {DEMOD_WRITE, 0xb2, 0x01}, /* set voltage pin always set 1*/ + {DEMOD_WRITE, 0x9a, 0xb0}, + {0xff, 0xaa, 0xff} +}; + +struct inittab m88rs2000_shutdown[] = { + {DEMOD_WRITE, 0x9a, 0x30}, + {DEMOD_WRITE, 0xb0, 0x00}, + {DEMOD_WRITE, 0xf1, 0x89}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {TUNER_WRITE, 0x00, 0x40}, + {DEMOD_WRITE, 0x81, 0x81}, + {0xff, 0xaa, 0xff} +}; + +struct inittab tuner_reset[] = { + {TUNER_WRITE, 0x42, 0x73}, + {TUNER_WRITE, 0x05, 0x07}, + {TUNER_WRITE, 0x20, 0x27}, + {TUNER_WRITE, 0x07, 0x02}, + {TUNER_WRITE, 0x11, 0xff}, + {TUNER_WRITE, 0x60, 0xf9}, + {TUNER_WRITE, 0x08, 0x01}, + {TUNER_WRITE, 0x00, 0x41}, + {0xff, 0xaa, 0xff} +}; + +struct inittab fe_reset[] = { + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0xf1, 0xbf}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x20, 0x81}, + {DEMOD_WRITE, 0x21, 0x80}, + {DEMOD_WRITE, 0x10, 0x33}, + {DEMOD_WRITE, 0x11, 0x44}, + {DEMOD_WRITE, 0x12, 0x07}, + {DEMOD_WRITE, 0x18, 0x20}, + {DEMOD_WRITE, 0x28, 0x04}, + {DEMOD_WRITE, 0x29, 0x8e}, + {DEMOD_WRITE, 0x3b, 0xff}, + {DEMOD_WRITE, 0x32, 0x10}, + {DEMOD_WRITE, 0x33, 0x02}, + {DEMOD_WRITE, 0x34, 0x30}, + {DEMOD_WRITE, 0x35, 0xff}, + {DEMOD_WRITE, 0x38, 0x50}, + {DEMOD_WRITE, 0x39, 0x68}, + {DEMOD_WRITE, 0x3c, 0x7f}, + {DEMOD_WRITE, 0x3d, 0x0f}, + {DEMOD_WRITE, 0x45, 0x20}, + {DEMOD_WRITE, 0x46, 0x24}, + {DEMOD_WRITE, 0x47, 0x7c}, + {DEMOD_WRITE, 0x48, 0x16}, + {DEMOD_WRITE, 0x49, 0x04}, + {DEMOD_WRITE, 0x4a, 0x01}, + {DEMOD_WRITE, 0x4b, 0x78}, + {DEMOD_WRITE, 0X4d, 0xd2}, + {DEMOD_WRITE, 0x4e, 0x6d}, + {DEMOD_WRITE, 0x50, 0x30}, + {DEMOD_WRITE, 0x51, 0x30}, + {DEMOD_WRITE, 0x54, 0x7b}, + {DEMOD_WRITE, 0x56, 0x09}, + {DEMOD_WRITE, 0x58, 0x59}, + {DEMOD_WRITE, 0x59, 0x37}, + {DEMOD_WRITE, 0x63, 0xfa}, + {0xff, 0xaa, 0xff} +}; + +struct inittab fe_trigger[] = { + {DEMOD_WRITE, 0x97, 0x04}, + {DEMOD_WRITE, 0x99, 0x77}, + {DEMOD_WRITE, 0x9b, 0x64}, + {DEMOD_WRITE, 0x9e, 0x00}, + {DEMOD_WRITE, 0x9f, 0xf8}, + {DEMOD_WRITE, 0xa0, 0x20}, + {DEMOD_WRITE, 0xa1, 0xe0}, + {DEMOD_WRITE, 0xa3, 0x38}, + {DEMOD_WRITE, 0x98, 0xff}, + {DEMOD_WRITE, 0xc0, 0x0f}, + {DEMOD_WRITE, 0x89, 0x01}, + {DEMOD_WRITE, 0x00, 0x00}, + {WRITE_DELAY, 0x0a, 0x00}, + {DEMOD_WRITE, 0x00, 0x01}, + {DEMOD_WRITE, 0x00, 0x00}, + {DEMOD_WRITE, 0x9a, 0xb0}, + {0xff, 0xaa, 0xff} +}; + +static int m88rs2000_tab_set(struct m88rs2000_state *state, + struct inittab *tab) +{ + int ret = 0; + u8 i; + if (tab == NULL) + return -EINVAL; + + for (i = 0; i < 255; i++) { + switch (tab[i].cmd) { + case 0x01: + ret = m88rs2000_demod_write(state, tab[i].reg, + tab[i].val); + break; + case 0x02: + ret = m88rs2000_tuner_write(state, tab[i].reg, + tab[i].val); + break; + case 0x10: + if (tab[i].reg > 0) + mdelay(tab[i].reg); + break; + case 0xff: + if (tab[i].reg == 0xaa && tab[i].val == 0xff) + return 0; + case 0x00: + break; + default: + return -EINVAL; + } + if (ret < 0) + return -ENODEV; + } + return 0; +} + +static int m88rs2000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt) +{ + deb_info("%s: %s\n", __func__, + volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : + volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??"); + + return 0; +} + +static int m88rs2000_startup(struct m88rs2000_state *state) +{ + int ret = 0; + u8 reg; + + reg = m88rs2000_tuner_read(state, 0x00); + if ((reg & 0x40) == 0) + ret = -ENODEV; + + return ret; +} + +static int m88rs2000_init(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + + deb_info("m88rs2000: init chip\n"); + /* Setup frontend from shutdown/cold */ + ret = m88rs2000_tab_set(state, m88rs2000_setup); + + return ret; +} + +static int m88rs2000_sleep(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + /* Shutdown the frondend */ + ret = m88rs2000_tab_set(state, m88rs2000_shutdown); + return ret; +} + +static int m88rs2000_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + u8 reg = m88rs2000_demod_read(state, 0x8c); + + *status = 0; + + if ((reg & 0x7) == 0x7) { + *status = FE_HAS_CARRIER | FE_HAS_SIGNAL | FE_HAS_VITERBI + | FE_HAS_LOCK; + if (state->config->set_ts_params) + state->config->set_ts_params(fe, CALL_IS_READ); + } + return 0; +} + +/* Extact code for these unknown but lmedm04 driver uses interupt callbacks */ + +static int m88rs2000_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + deb_info("m88rs2000_read_ber %d\n", *ber); + *ber = 0; + return 0; +} + +static int m88rs2000_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + *strength = 0; + return 0; +} + +static int m88rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + deb_info("m88rs2000_read_snr %d\n", *snr); + *snr = 0; + return 0; +} + +static int m88rs2000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + deb_info("m88rs2000_read_ber %d\n", *ucblocks); + *ucblocks = 0; + return 0; +} + +static int m88rs2000_tuner_gate_ctrl(struct m88rs2000_state *state, u8 offset) +{ + int ret; + ret = m88rs2000_tuner_write(state, 0x51, 0x1f - offset); + ret |= m88rs2000_tuner_write(state, 0x51, 0x1f); + ret |= m88rs2000_tuner_write(state, 0x50, offset); + ret |= m88rs2000_tuner_write(state, 0x50, 0x00); + msleep(20); + return ret; +} + +static int m88rs2000_set_tuner_rf(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + int reg; + reg = m88rs2000_tuner_read(state, 0x3d); + reg &= 0x7f; + if (reg < 0x16) + reg = 0xa1; + else if (reg == 0x16) + reg = 0x99; + else + reg = 0xf9; + + m88rs2000_tuner_write(state, 0x60, reg); + reg = m88rs2000_tuner_gate_ctrl(state, 0x08); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + return reg; +} + +static int m88rs2000_set_tuner(struct dvb_frontend *fe, u16 *offset) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct m88rs2000_state *state = fe->demodulator_priv; + int ret; + u32 frequency = c->frequency; + s32 offset_khz; + s32 tmp; + u32 symbol_rate = (c->symbol_rate / 1000); + u32 f3db, gdiv28; + u16 value, ndiv, lpf_coeff; + u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf; + u8 lo = 0x01, div4 = 0x0; + + /* Reset Tuner */ + ret = m88rs2000_tab_set(state, tuner_reset); + + /* Calculate frequency divider */ + if (frequency < 1060000) { + lo |= 0x10; + div4 = 0x1; + ndiv = (frequency * 14 * 4) / FE_CRYSTAL_KHZ; + } else + ndiv = (frequency * 14 * 2) / FE_CRYSTAL_KHZ; + ndiv = ndiv + ndiv % 2; + ndiv = ndiv - 1024; + + ret = m88rs2000_tuner_write(state, 0x10, 0x80 | lo); + + /* Set frequency divider */ + ret |= m88rs2000_tuner_write(state, 0x01, (ndiv >> 8) & 0xf); + ret |= m88rs2000_tuner_write(state, 0x02, ndiv & 0xff); + + ret |= m88rs2000_tuner_write(state, 0x03, 0x06); + ret |= m88rs2000_tuner_gate_ctrl(state, 0x10); + if (ret < 0) + return -ENODEV; + + /* Tuner Frequency Range */ + ret = m88rs2000_tuner_write(state, 0x10, lo); + + ret |= m88rs2000_tuner_gate_ctrl(state, 0x08); + + /* Tuner RF */ + ret |= m88rs2000_set_tuner_rf(fe); + + gdiv28 = (FE_CRYSTAL_KHZ / 1000 * 1694 + 500) / 1000; + ret |= m88rs2000_tuner_write(state, 0x04, gdiv28 & 0xff); + ret |= m88rs2000_tuner_gate_ctrl(state, 0x04); + if (ret < 0) + return -ENODEV; + + value = m88rs2000_tuner_read(state, 0x26); + + f3db = (symbol_rate * 135) / 200 + 2000; + f3db += FREQ_OFFSET_LOW_SYM_RATE; + if (f3db < 7000) + f3db = 7000; + if (f3db > 40000) + f3db = 40000; + + gdiv28 = gdiv28 * 207 / (value * 2 + 151); + mlpf_max = gdiv28 * 135 / 100; + mlpf_min = gdiv28 * 78 / 100; + if (mlpf_max > 63) + mlpf_max = 63; + + lpf_coeff = 2766; + + nlpf = (f3db * gdiv28 * 2 / lpf_coeff / + (FE_CRYSTAL_KHZ / 1000) + 1) / 2; + if (nlpf > 23) + nlpf = 23; + if (nlpf < 1) + nlpf = 1; + + lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + + if (lpf_mxdiv < mlpf_min) { + nlpf++; + lpf_mxdiv = (nlpf * (FE_CRYSTAL_KHZ / 1000) + * lpf_coeff * 2 / f3db + 1) / 2; + } + + if (lpf_mxdiv > mlpf_max) + lpf_mxdiv = mlpf_max; + + ret = m88rs2000_tuner_write(state, 0x04, lpf_mxdiv); + ret |= m88rs2000_tuner_write(state, 0x06, nlpf); + + ret |= m88rs2000_tuner_gate_ctrl(state, 0x04); + + ret |= m88rs2000_tuner_gate_ctrl(state, 0x01); + + msleep(80); + /* calculate offset assuming 96000kHz*/ + offset_khz = (ndiv - ndiv % 2 + 1024) * FE_CRYSTAL_KHZ + / 14 / (div4 + 1) / 2; + + offset_khz -= frequency; + + tmp = offset_khz; + tmp *= 65536; + + tmp = (2 * tmp + 96000) / (2 * 96000); + if (tmp < 0) + tmp += 65536; + + *offset = tmp & 0xffff; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret < 0) ? -EINVAL : 0; +} + +static int m88rs2000_set_fec(struct m88rs2000_state *state, + fe_code_rate_t fec) +{ + int ret; + u16 fec_set; + switch (fec) { + /* This is not confirmed kept for reference */ +/* case FEC_1_2: + fec_set = 0x88; + break; + case FEC_2_3: + fec_set = 0x68; + break; + case FEC_3_4: + fec_set = 0x48; + break; + case FEC_5_6: + fec_set = 0x28; + break; + case FEC_7_8: + fec_set = 0x18; + break; */ + case FEC_AUTO: + default: + fec_set = 0x08; + } + ret = m88rs2000_demod_write(state, 0x76, fec_set); + + return 0; +} + + +static fe_code_rate_t m88rs2000_get_fec(struct m88rs2000_state *state) +{ + u8 reg; + m88rs2000_demod_write(state, 0x9a, 0x30); + reg = m88rs2000_demod_read(state, 0x76); + m88rs2000_demod_write(state, 0x9a, 0xb0); + + switch (reg) { + case 0x88: + return FEC_1_2; + case 0x68: + return FEC_2_3; + case 0x48: + return FEC_3_4; + case 0x28: + return FEC_5_6; + case 0x18: + return FEC_7_8; + case 0x08: + default: + break; + } + + return FEC_AUTO; +} + +static int m88rs2000_set_frontend(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + fe_status_t status; + int i, ret; + u16 offset = 0; + u8 reg; + + state->no_lock_count = 0; + + if (c->delivery_system != SYS_DVBS) { + deb_info("%s: unsupported delivery " + "system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + /* Set Tuner */ + ret = m88rs2000_set_tuner(fe, &offset); + if (ret < 0) + return -ENODEV; + + ret = m88rs2000_demod_write(state, 0x9a, 0x30); + /* Unknown usually 0xc6 sometimes 0xc1 */ + reg = m88rs2000_demod_read(state, 0x86); + ret |= m88rs2000_demod_write(state, 0x86, reg); + /* Offset lower nibble always 0 */ + ret |= m88rs2000_demod_write(state, 0x9c, (offset >> 8)); + ret |= m88rs2000_demod_write(state, 0x9d, offset & 0xf0); + + + /* Reset Demod */ + ret = m88rs2000_tab_set(state, fe_reset); + if (ret < 0) + return -ENODEV; + + /* Unknown */ + reg = m88rs2000_demod_read(state, 0x70); + ret = m88rs2000_demod_write(state, 0x70, reg); + + /* Set FEC */ + ret |= m88rs2000_set_fec(state, c->fec_inner); + ret |= m88rs2000_demod_write(state, 0x85, 0x1); + ret |= m88rs2000_demod_write(state, 0x8a, 0xbf); + ret |= m88rs2000_demod_write(state, 0x8d, 0x1e); + ret |= m88rs2000_demod_write(state, 0x90, 0xf1); + ret |= m88rs2000_demod_write(state, 0x91, 0x08); + + if (ret < 0) + return -ENODEV; + + /* Set Symbol Rate */ + ret = m88rs2000_set_symbolrate(fe, c->symbol_rate); + if (ret < 0) + return -ENODEV; + + /* Set up Demod */ + ret = m88rs2000_tab_set(state, fe_trigger); + if (ret < 0) + return -ENODEV; + + for (i = 0; i < 25; i++) { + u8 reg = m88rs2000_demod_read(state, 0x8c); + if ((reg & 0x7) == 0x7) { + status = FE_HAS_LOCK; + break; + } + state->no_lock_count++; + if (state->no_lock_count > 15) { + reg = m88rs2000_demod_read(state, 0x70); + reg ^= 0x4; + m88rs2000_demod_write(state, 0x70, reg); + state->no_lock_count = 0; + } + if (state->no_lock_count == 20) + m88rs2000_set_tuner_rf(fe); + msleep(20); + } + + if (status & FE_HAS_LOCK) { + state->fec_inner = m88rs2000_get_fec(state); + /* Uknown suspect SNR level */ + reg = m88rs2000_demod_read(state, 0x65); + } + + state->tuner_frequency = c->frequency; + state->symbol_rate = c->symbol_rate; + return 0; +} + +static int m88rs2000_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct m88rs2000_state *state = fe->demodulator_priv; + c->fec_inner = state->fec_inner; + c->frequency = state->tuner_frequency; + c->symbol_rate = state->symbol_rate; + return 0; +} + +static int m88rs2000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + + if (enable) + m88rs2000_demod_write(state, 0x81, 0x84); + else + m88rs2000_demod_write(state, 0x81, 0x81); + udelay(10); + return 0; +} + +static void m88rs2000_release(struct dvb_frontend *fe) +{ + struct m88rs2000_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops m88rs2000_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "M88RS2000 DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 5000, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + + .release = m88rs2000_release, + .init = m88rs2000_init, + .sleep = m88rs2000_sleep, + .write = m88rs2000_write, + .i2c_gate_ctrl = m88rs2000_i2c_gate_ctrl, + .read_status = m88rs2000_read_status, + .read_ber = m88rs2000_read_ber, + .read_signal_strength = m88rs2000_read_signal_strength, + .read_snr = m88rs2000_read_snr, + .read_ucblocks = m88rs2000_read_ucblocks, + .diseqc_send_master_cmd = m88rs2000_send_diseqc_msg, + .diseqc_send_burst = m88rs2000_send_diseqc_burst, + .set_tone = m88rs2000_set_tone, + .set_voltage = m88rs2000_set_voltage, + + .set_frontend = m88rs2000_set_frontend, + .get_frontend = m88rs2000_get_frontend, +}; + +struct dvb_frontend *m88rs2000_attach(const struct m88rs2000_config *config, + struct i2c_adapter *i2c) +{ + struct m88rs2000_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct m88rs2000_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->tuner_frequency = 0; + state->symbol_rate = 0; + state->fec_inner = 0; + + if (m88rs2000_startup(state) < 0) + goto error; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &m88rs2000_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + + return NULL; +} +EXPORT_SYMBOL(m88rs2000_attach); + +MODULE_DESCRIPTION("M88RS2000 DVB-S Demodulator driver"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.13"); + diff --git a/drivers/media/dvb/frontends/m88rs2000.h b/drivers/media/dvb/frontends/m88rs2000.h new file mode 100644 index 000000000000..59acdb696873 --- /dev/null +++ b/drivers/media/dvb/frontends/m88rs2000.h @@ -0,0 +1,66 @@ +/* + Driver for M88RS2000 demodulator + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef M88RS2000_H +#define M88RS2000_H + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + +struct m88rs2000_config { + /* Demodulator i2c address */ + u8 demod_addr; + /* Tuner address */ + u8 tuner_addr; + + u8 *inittab; + + /* minimum delay before retuning */ + int min_delay_ms; + + int (*set_ts_params)(struct dvb_frontend *, int); +}; + +enum { + CALL_IS_SET_FRONTEND = 0x0, + CALL_IS_READ, +}; + +#if defined(CONFIG_DVB_M88RS2000) || (defined(CONFIG_DVB_M88RS2000_MODULE) && \ + defined(MODULE)) +extern struct dvb_frontend *m88rs2000_attach( + const struct m88rs2000_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *m88rs2000_attach( + const struct m88rs2000_config *config, struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_M88RS2000 */ + +#define FE_CRYSTAL_KHZ 27000 +#define FREQ_OFFSET_LOW_SYM_RATE 3000 + +enum { + DEMOD_WRITE = 0x1, + TUNER_WRITE, + WRITE_DELAY = 0x10, +}; +#endif /* M88RS2000_H */ diff --git a/drivers/media/dvb/frontends/rtl2830.c b/drivers/media/dvb/frontends/rtl2830.c new file mode 100644 index 000000000000..45196c5b0736 --- /dev/null +++ b/drivers/media/dvb/frontends/rtl2830.c @@ -0,0 +1,562 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +/* + * Driver implements own I2C-adapter for tuner I2C access. That's since chip + * have unusual I2C-gate control which closes gate automatically after each + * I2C transfer. Using own I2C adapter we can workaround that. + */ + +#include "rtl2830_priv.h" + +int rtl2830_debug; +module_param_named(debug, rtl2830_debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +/* write multiple hardware registers */ +static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + u8 buf[1+len]; + struct i2c_msg msg[1] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1+len, + .buf = buf, + } + }; + + buf[0] = reg; + memcpy(&buf[1], val, len); + + ret = i2c_transfer(priv->i2c, msg, 1); + if (ret == 1) { + ret = 0; + } else { + warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* read multiple hardware registers */ +static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len) +{ + int ret; + struct i2c_msg msg[2] = { + { + .addr = priv->cfg.i2c_addr, + .flags = 0, + .len = 1, + .buf = ®, + }, { + .addr = priv->cfg.i2c_addr, + .flags = I2C_M_RD, + .len = len, + .buf = val, + } + }; + + ret = i2c_transfer(priv->i2c, msg, 2); + if (ret == 2) { + ret = 0; + } else { + warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len); + ret = -EREMOTEIO; + } + return ret; +} + +/* write multiple registers */ +static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) +{ + int ret; + u8 reg2 = (reg >> 0) & 0xff; + u8 page = (reg >> 8) & 0xff; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2830_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2830_wr(priv, reg2, val, len); +} + +/* read multiple registers */ +static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len) +{ + int ret; + u8 reg2 = (reg >> 0) & 0xff; + u8 page = (reg >> 8) & 0xff; + + /* switch bank if needed */ + if (page != priv->page) { + ret = rtl2830_wr(priv, 0x00, &page, 1); + if (ret) + return ret; + + priv->page = page; + } + + return rtl2830_rd(priv, reg2, val, len); +} + +#if 0 /* currently not used */ +/* write single register */ +static int rtl2830_wr_reg(struct rtl2830_priv *priv, u16 reg, u8 val) +{ + return rtl2830_wr_regs(priv, reg, &val, 1); +} +#endif + +/* read single register */ +static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val) +{ + return rtl2830_rd_regs(priv, reg, val, 1); +} + +/* write single register with mask */ +int rtl2830_wr_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 val, u8 mask) +{ + int ret; + u8 tmp; + + /* no need for read if whole reg is written */ + if (mask != 0xff) { + ret = rtl2830_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + val &= mask; + tmp &= ~mask; + val |= tmp; + } + + return rtl2830_wr_regs(priv, reg, &val, 1); +} + +/* read single register with mask */ +int rtl2830_rd_reg_mask(struct rtl2830_priv *priv, u16 reg, u8 *val, u8 mask) +{ + int ret, i; + u8 tmp; + + ret = rtl2830_rd_regs(priv, reg, &tmp, 1); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + +static int rtl2830_init(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret, i; + u64 num; + u8 buf[3], tmp; + u32 if_ctl; + struct rtl2830_reg_val_mask tab[] = { + { 0x00d, 0x01, 0x03 }, + { 0x00d, 0x10, 0x10 }, + { 0x104, 0x00, 0x1e }, + { 0x105, 0x80, 0x80 }, + { 0x110, 0x02, 0x03 }, + { 0x110, 0x08, 0x0c }, + { 0x17b, 0x00, 0x40 }, + { 0x17d, 0x05, 0x0f }, + { 0x17d, 0x50, 0xf0 }, + { 0x18c, 0x08, 0x0f }, + { 0x18d, 0x00, 0xc0 }, + { 0x188, 0x05, 0x0f }, + { 0x189, 0x00, 0xfc }, + { 0x2d5, 0x02, 0x02 }, + { 0x2f1, 0x02, 0x06 }, + { 0x2f1, 0x20, 0xf8 }, + { 0x16d, 0x00, 0x01 }, + { 0x1a6, 0x00, 0x80 }, + { 0x106, priv->cfg.vtop, 0x3f }, + { 0x107, priv->cfg.krf, 0x3f }, + { 0x112, 0x28, 0xff }, + { 0x103, priv->cfg.agc_targ_val, 0xff }, + { 0x00a, 0x02, 0x07 }, + { 0x140, 0x0c, 0x3c }, + { 0x140, 0x40, 0xc0 }, + { 0x15b, 0x05, 0x07 }, + { 0x15b, 0x28, 0x38 }, + { 0x15c, 0x05, 0x07 }, + { 0x15c, 0x28, 0x38 }, + { 0x115, priv->cfg.spec_inv, 0x01 }, + { 0x16f, 0x01, 0x07 }, + { 0x170, 0x18, 0x38 }, + { 0x172, 0x0f, 0x0f }, + { 0x173, 0x08, 0x38 }, + { 0x175, 0x01, 0x07 }, + { 0x176, 0x00, 0xc0 }, + }; + + for (i = 0; i < ARRAY_SIZE(tab); i++) { + ret = rtl2830_wr_reg_mask(priv, tab[i].reg, tab[i].val, + tab[i].mask); + if (ret) + goto err; + } + + ret = rtl2830_wr_regs(priv, 0x18f, "\x28\x00", 2); + if (ret) + goto err; + + ret = rtl2830_wr_regs(priv, 0x195, + "\x04\x06\x0a\x12\x0a\x12\x1e\x28", 8); + if (ret) + goto err; + + num = priv->cfg.if_dvbt % priv->cfg.xtal; + num *= 0x400000; + num = div_u64(num, priv->cfg.xtal); + num = -num; + if_ctl = num & 0x3fffff; + dbg("%s: if_ctl=%08x", __func__, if_ctl); + + ret = rtl2830_rd_reg_mask(priv, 0x119, &tmp, 0xc0); /* b[7:6] */ + if (ret) + goto err; + + buf[0] = tmp << 6; + buf[0] = (if_ctl >> 16) & 0x3f; + buf[1] = (if_ctl >> 8) & 0xff; + buf[2] = (if_ctl >> 0) & 0xff; + + ret = rtl2830_wr_regs(priv, 0x119, buf, 3); + if (ret) + goto err; + + /* TODO: spec init */ + + /* soft reset */ + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x04, 0x04); + if (ret) + goto err; + + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x00, 0x04); + if (ret) + goto err; + + priv->sleeping = false; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int rtl2830_sleep(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + priv->sleeping = true; + return 0; +} + +int rtl2830_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 500; + s->step_size = fe->ops.info.frequency_stepsize * 2; + s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; + + return 0; +} + +static int rtl2830_set_frontend(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i; + static u8 bw_params1[3][34] = { + { + 0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41, + 0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a, + 0x1f, 0x47, 0x1f, 0x7c, 0x00, 0x30, 0x01, 0x4b, 0x02, 0x82, + 0x03, 0x73, 0x03, 0xcf, /* 6 MHz */ + }, { + 0x1f, 0xfa, 0x1f, 0xda, 0x1f, 0xc1, 0x1f, 0xb3, 0x1f, 0xca, + 0x00, 0x07, 0x00, 0x4d, 0x00, 0x6d, 0x00, 0x40, 0x1f, 0xca, + 0x1f, 0x4d, 0x1f, 0x2a, 0x1f, 0xb2, 0x00, 0xec, 0x02, 0x7e, + 0x03, 0xd0, 0x04, 0x53, /* 7 MHz */ + }, { + 0x00, 0x10, 0x00, 0x0e, 0x1f, 0xf7, 0x1f, 0xc9, 0x1f, 0xa0, + 0x1f, 0xa6, 0x1f, 0xec, 0x00, 0x4e, 0x00, 0x7d, 0x00, 0x3a, + 0x1f, 0x98, 0x1f, 0x10, 0x1f, 0x40, 0x00, 0x75, 0x02, 0x5f, + 0x04, 0x24, 0x04, 0xdb, /* 8 MHz */ + }, + }; + static u8 bw_params2[3][6] = { + {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30,}, /* 6 MHz */ + {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98,}, /* 7 MHz */ + {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64,}, /* 8 MHz */ + }; + + + dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__, + c->frequency, c->bandwidth_hz, c->inversion); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + switch (c->bandwidth_hz) { + case 6000000: + i = 0; + break; + case 7000000: + i = 1; + break; + case 8000000: + i = 2; + break; + default: + dbg("invalid bandwidth"); + return -EINVAL; + } + + ret = rtl2830_wr_reg_mask(priv, 0x008, i << 1, 0x06); + if (ret) + goto err; + + /* 1/2 split I2C write */ + ret = rtl2830_wr_regs(priv, 0x11c, &bw_params1[i][0], 17); + if (ret) + goto err; + + /* 2/2 split I2C write */ + ret = rtl2830_wr_regs(priv, 0x12d, &bw_params1[i][17], 17); + if (ret) + goto err; + + ret = rtl2830_wr_regs(priv, 0x19d, bw_params2[i], 6); + if (ret) + goto err; + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + int ret; + u8 tmp; + *status = 0; + + if (priv->sleeping) + return 0; + + ret = rtl2830_rd_reg_mask(priv, 0x351, &tmp, 0x78); /* [6:3] */ + if (ret) + goto err; + + if (tmp == 11) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } else if (tmp == 10) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + } + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + *snr = 0; + return 0; +} + +static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + return 0; +} + +static int rtl2830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + *strength = 0; + return 0; +} + +static struct dvb_frontend_ops rtl2830_ops; + +static u32 rtl2830_tuner_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int rtl2830_tuner_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct rtl2830_priv *priv = i2c_get_adapdata(i2c_adap); + int ret; + + /* open i2c-gate */ + ret = rtl2830_wr_reg_mask(priv, 0x101, 0x08, 0x08); + if (ret) + goto err; + + ret = i2c_transfer(priv->i2c, msg, num); + if (ret < 0) + warn("tuner i2c failed=%d", ret); + + return ret; +err: + dbg("%s: failed=%d", __func__, ret); + return ret; +} + +static struct i2c_algorithm rtl2830_tuner_i2c_algo = { + .master_xfer = rtl2830_tuner_i2c_xfer, + .functionality = rtl2830_tuner_i2c_func, +}; + +struct i2c_adapter *rtl2830_get_tuner_i2c_adapter(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + return &priv->tuner_i2c_adapter; +} +EXPORT_SYMBOL(rtl2830_get_tuner_i2c_adapter); + +static void rtl2830_release(struct dvb_frontend *fe) +{ + struct rtl2830_priv *priv = fe->demodulator_priv; + + i2c_del_adapter(&priv->tuner_i2c_adapter); + kfree(priv); +} + +struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg, + struct i2c_adapter *i2c) +{ + struct rtl2830_priv *priv = NULL; + int ret = 0; + u8 tmp; + + /* allocate memory for the internal state */ + priv = kzalloc(sizeof(struct rtl2830_priv), GFP_KERNEL); + if (priv == NULL) + goto err; + + /* setup the priv */ + priv->i2c = i2c; + memcpy(&priv->cfg, cfg, sizeof(struct rtl2830_config)); + + /* check if the demod is there */ + ret = rtl2830_rd_reg(priv, 0x000, &tmp); + if (ret) + goto err; + + /* create dvb_frontend */ + memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(struct dvb_frontend_ops)); + priv->fe.demodulator_priv = priv; + + /* create tuner i2c adapter */ + strlcpy(priv->tuner_i2c_adapter.name, "RTL2830 tuner I2C adapter", + sizeof(priv->tuner_i2c_adapter.name)); + priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo; + priv->tuner_i2c_adapter.algo_data = NULL; + i2c_set_adapdata(&priv->tuner_i2c_adapter, priv); + if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) { + err("tuner I2C bus could not be initialized"); + goto err; + } + + priv->sleeping = true; + + return &priv->fe; +err: + dbg("%s: failed=%d", __func__, ret); + kfree(priv); + return NULL; +} +EXPORT_SYMBOL(rtl2830_attach); + +static struct dvb_frontend_ops rtl2830_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Realtek RTL2830 (DVB-T)", + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .release = rtl2830_release, + + .init = rtl2830_init, + .sleep = rtl2830_sleep, + + .get_tune_settings = rtl2830_get_tune_settings, + + .set_frontend = rtl2830_set_frontend, + + .read_status = rtl2830_read_status, + .read_snr = rtl2830_read_snr, + .read_ber = rtl2830_read_ber, + .read_ucblocks = rtl2830_read_ucblocks, + .read_signal_strength = rtl2830_read_signal_strength, +}; + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/rtl2830.h b/drivers/media/dvb/frontends/rtl2830.h new file mode 100644 index 000000000000..1c6ee91749c2 --- /dev/null +++ b/drivers/media/dvb/frontends/rtl2830.h @@ -0,0 +1,97 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2830_H +#define RTL2830_H + +#include <linux/dvb/frontend.h> + +struct rtl2830_config { + /* + * Demodulator I2C address. + */ + u8 i2c_addr; + + /* + * Xtal frequency. + * Hz + * 4000000, 16000000, 25000000, 28800000 + */ + u32 xtal; + + /* + * TS output mode. + */ + u8 ts_mode; + + /* + * Spectrum inversion. + */ + bool spec_inv; + + /* + * IFs for all used modes. + * Hz + * 4570000, 4571429, 36000000, 36125000, 36166667, 44000000 + */ + u32 if_dvbt; + + /* + */ + u8 vtop; + + /* + */ + u8 krf; + + /* + */ + u8 agc_targ_val; +}; + +#if defined(CONFIG_DVB_RTL2830) || \ + (defined(CONFIG_DVB_RTL2830_MODULE) && defined(MODULE)) +extern struct dvb_frontend *rtl2830_attach( + const struct rtl2830_config *config, + struct i2c_adapter *i2c +); + +extern struct i2c_adapter *rtl2830_get_tuner_i2c_adapter( + struct dvb_frontend *fe +); +#else +static inline struct dvb_frontend *rtl2830_attach( + const struct rtl2830_config *config, + struct i2c_adapter *i2c +) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *rtl2830_get_tuner_i2c_adapter( + struct dvb_frontend *fe +) +{ + return NULL; +} +#endif + +#endif /* RTL2830_H */ diff --git a/drivers/media/dvb/frontends/rtl2830_priv.h b/drivers/media/dvb/frontends/rtl2830_priv.h new file mode 100644 index 000000000000..4a464761b5b8 --- /dev/null +++ b/drivers/media/dvb/frontends/rtl2830_priv.h @@ -0,0 +1,57 @@ +/* + * Realtek RTL2830 DVB-T demodulator driver + * + * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef RTL2830_PRIV_H +#define RTL2830_PRIV_H + +#include "dvb_frontend.h" +#include "rtl2830.h" + +#define LOG_PREFIX "rtl2830" + +#undef dbg +#define dbg(f, arg...) \ + if (rtl2830_debug) \ + printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) +#undef err +#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg) +#undef info +#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg) +#undef warn +#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg) + +struct rtl2830_priv { + struct i2c_adapter *i2c; + struct dvb_frontend fe; + struct rtl2830_config cfg; + struct i2c_adapter tuner_i2c_adapter; + + bool sleeping; + + u8 page; /* active register page */ +}; + +struct rtl2830_reg_val_mask { + u16 reg; + u8 val; + u8 mask; +}; + +#endif /* RTL2830_PRIV_H */ diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c index 38565beafe23..dd08f4ac64a8 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb/frontends/stb0899_drv.c @@ -67,7 +67,7 @@ static const struct stb0899_tab stb0899_cn_tab[] = { * Crude linear extrapolation below -84.8dBm and above -8.0dBm. */ static const struct stb0899_tab stb0899_dvbsrf_tab[] = { - { -950, -128 }, + { -750, -128 }, { -748, -94 }, { -745, -92 }, { -735, -90 }, @@ -131,7 +131,7 @@ static const struct stb0899_tab stb0899_dvbs2rf_tab[] = { { -730, 13645 }, { -750, 13909 }, { -766, 14153 }, - { -999, 16383 } + { -950, 16383 } }; /* DVB-S2 Es/N0 quant in dB/100 vs read value * 100*/ @@ -964,6 +964,7 @@ static int stb0899_read_signal_strength(struct dvb_frontend *fe, u16 *strength) int val; u32 reg; + *strength = 0; switch (state->delsys) { case SYS_DVBS: case SYS_DSS: @@ -983,11 +984,11 @@ static int stb0899_read_signal_strength(struct dvb_frontend *fe, u16 *strength) break; case SYS_DVBS2: if (internal->lock) { - reg = STB0899_READ_S2REG(STB0899_DEMOD, IF_AGC_GAIN); + reg = STB0899_READ_S2REG(STB0899_S2DEMOD, IF_AGC_GAIN); val = STB0899_GETFIELD(IF_AGC_GAIN, reg); *strength = stb0899_table_lookup(stb0899_dvbs2rf_tab, ARRAY_SIZE(stb0899_dvbs2rf_tab) - 1, val); - *strength += 750; + *strength += 950; dprintk(state->verbose, FE_DEBUG, 1, "IF_AGC_GAIN = 0x%04x, C = %d * 0.1 dBm", val & 0x3fff, *strength); } @@ -1009,6 +1010,7 @@ static int stb0899_read_snr(struct dvb_frontend *fe, u16 *snr) u8 buf[2]; u32 reg; + *snr = 0; reg = stb0899_read_reg(state, STB0899_VSTATUS); switch (state->delsys) { case SYS_DVBS: @@ -1071,7 +1073,7 @@ static int stb0899_read_status(struct dvb_frontend *fe, enum fe_status *status) reg = stb0899_read_reg(state, STB0899_VSTATUS); if (STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg)) { dprintk(state->verbose, FE_DEBUG, 1, "--------> FE_HAS_CARRIER | FE_HAS_LOCK"); - *status |= FE_HAS_CARRIER | FE_HAS_LOCK; + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; reg = stb0899_read_reg(state, STB0899_PLPARM); if (STB0899_GETFIELD(VITCURPUN, reg)) { diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c index fb5548a82208..632b25156e4c 100644 --- a/drivers/media/dvb/frontends/stv0288.c +++ b/drivers/media/dvb/frontends/stv0288.c @@ -506,7 +506,7 @@ static int stv0288_set_frontend(struct dvb_frontend *fe) tda[1] = (unsigned char)tm; stv0288_writeregI(state, 0x2b, tda[1]); stv0288_writeregI(state, 0x2c, tda[2]); - udelay(30); + msleep(30); } state->tuner_frequency = c->frequency; state->fec_inner = FEC_AUTO; diff --git a/drivers/media/dvb/frontends/tda10071.c b/drivers/media/dvb/frontends/tda10071.c index a99205026751..c21bc92d2811 100644 --- a/drivers/media/dvb/frontends/tda10071.c +++ b/drivers/media/dvb/frontends/tda10071.c @@ -1215,7 +1215,7 @@ error: EXPORT_SYMBOL(tda10071_attach); static struct dvb_frontend_ops tda10071_ops = { - .delsys = { SYS_DVBT, SYS_DVBT2 }, + .delsys = { SYS_DVBS, SYS_DVBS2 }, .info = { .name = "NXP TDA10071", .frequency_min = 950000, diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c index 8418c02bcefe..7539a5d71029 100644 --- a/drivers/media/dvb/ngene/ngene-cards.c +++ b/drivers/media/dvb/ngene/ngene-cards.c @@ -216,6 +216,7 @@ static int demod_attach_drxk(struct ngene_channel *chan, struct drxk_config config; memset(&config, 0, sizeof(config)); + config.microcode_name = "drxk_a3.mc"; config.adr = 0x29 + (chan->number ^ 2); chan->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c index b81df5fafe26..15b35c4725f1 100644 --- a/drivers/media/dvb/pt1/pt1.c +++ b/drivers/media/dvb/pt1/pt1.c @@ -28,6 +28,7 @@ #include <linux/pci.h> #include <linux/kthread.h> #include <linux/freezer.h> +#include <linux/ratelimit.h> #include "dvbdev.h" #include "dvb_demux.h" @@ -77,6 +78,8 @@ struct pt1 { struct pt1_adapter *adaps[PT1_NR_ADAPS]; struct pt1_table *tables; struct task_struct *kthread; + int table_index; + int buf_index; struct mutex lock; int power; @@ -90,12 +93,12 @@ struct pt1_adapter { u8 *buf; int upacket_count; int packet_count; + int st_count; struct dvb_adapter adap; struct dvb_demux demux; int users; struct dmxdev dmxdev; - struct dvb_net net; struct dvb_frontend *fe; int (*orig_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); @@ -119,7 +122,7 @@ static u32 pt1_read_reg(struct pt1 *pt1, int reg) return readl(pt1->regs + reg * 4); } -static int pt1_nr_tables = 64; +static int pt1_nr_tables = 8; module_param_named(nr_tables, pt1_nr_tables, int, 0); static void pt1_increment_table_count(struct pt1 *pt1) @@ -264,6 +267,7 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) struct pt1_adapter *adap; int offset; u8 *buf; + int sc; if (!page->upackets[PT1_NR_UPACKETS - 1]) return 0; @@ -280,6 +284,16 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) else if (!adap->upacket_count) continue; + if (upacket >> 24 & 1) + printk_ratelimited(KERN_INFO "earth-pt1: device " + "buffer overflowing. table[%d] buf[%d]\n", + pt1->table_index, pt1->buf_index); + sc = upacket >> 26 & 0x7; + if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7)) + printk_ratelimited(KERN_INFO "earth-pt1: data loss" + " in streamID(adapter)[%d]\n", index); + adap->st_count = sc; + buf = adap->buf; offset = adap->packet_count * 188 + adap->upacket_count * 3; buf[offset] = upacket >> 16; @@ -303,30 +317,25 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) static int pt1_thread(void *data) { struct pt1 *pt1; - int table_index; - int buf_index; struct pt1_buffer_page *page; pt1 = data; set_freezable(); - table_index = 0; - buf_index = 0; - while (!kthread_should_stop()) { try_to_freeze(); - page = pt1->tables[table_index].bufs[buf_index].page; + page = pt1->tables[pt1->table_index].bufs[pt1->buf_index].page; if (!pt1_filter(pt1, page)) { schedule_timeout_interruptible((HZ + 999) / 1000); continue; } - if (++buf_index >= PT1_NR_BUFS) { + if (++pt1->buf_index >= PT1_NR_BUFS) { pt1_increment_table_count(pt1); - buf_index = 0; - if (++table_index >= pt1_nr_tables) - table_index = 0; + pt1->buf_index = 0; + if (++pt1->table_index >= pt1_nr_tables) + pt1->table_index = 0; } } @@ -477,21 +486,60 @@ err: return ret; } +static int pt1_start_polling(struct pt1 *pt1) +{ + int ret = 0; + + mutex_lock(&pt1->lock); + if (!pt1->kthread) { + pt1->kthread = kthread_run(pt1_thread, pt1, "earth-pt1"); + if (IS_ERR(pt1->kthread)) { + ret = PTR_ERR(pt1->kthread); + pt1->kthread = NULL; + } + } + mutex_unlock(&pt1->lock); + return ret; +} + static int pt1_start_feed(struct dvb_demux_feed *feed) { struct pt1_adapter *adap; adap = container_of(feed->demux, struct pt1_adapter, demux); - if (!adap->users++) + if (!adap->users++) { + int ret; + + ret = pt1_start_polling(adap->pt1); + if (ret) + return ret; pt1_set_stream(adap->pt1, adap->index, 1); + } return 0; } +static void pt1_stop_polling(struct pt1 *pt1) +{ + int i, count; + + mutex_lock(&pt1->lock); + for (i = 0, count = 0; i < PT1_NR_ADAPS; i++) + count += pt1->adaps[i]->users; + + if (count == 0 && pt1->kthread) { + kthread_stop(pt1->kthread); + pt1->kthread = NULL; + } + mutex_unlock(&pt1->lock); +} + static int pt1_stop_feed(struct dvb_demux_feed *feed) { struct pt1_adapter *adap; adap = container_of(feed->demux, struct pt1_adapter, demux); - if (!--adap->users) + if (!--adap->users) { pt1_set_stream(adap->pt1, adap->index, 0); + pt1_stop_polling(adap->pt1); + } return 0; } @@ -575,7 +623,6 @@ static int pt1_wakeup(struct dvb_frontend *fe) static void pt1_free_adapter(struct pt1_adapter *adap) { - dvb_net_release(&adap->net); adap->demux.dmx.close(&adap->demux.dmx); dvb_dmxdev_release(&adap->dmxdev); dvb_dmx_release(&adap->demux); @@ -616,6 +663,7 @@ pt1_alloc_adapter(struct pt1 *pt1) adap->buf = buf; adap->upacket_count = 0; adap->packet_count = 0; + adap->st_count = -1; dvb_adap = &adap->adap; dvb_adap->priv = adap; @@ -644,8 +692,6 @@ pt1_alloc_adapter(struct pt1 *pt1) if (ret < 0) goto err_dmx_release; - dvb_net_init(dvb_adap, &adap->net, &demux->dmx); - return adap; err_dmx_release: @@ -1020,7 +1066,8 @@ static void __devexit pt1_remove(struct pci_dev *pdev) pt1 = pci_get_drvdata(pdev); regs = pt1->regs; - kthread_stop(pt1->kthread); + if (pt1->kthread) + kthread_stop(pt1->kthread); pt1_cleanup_tables(pt1); pt1_cleanup_frontends(pt1); pt1_disable_ram(pt1); @@ -1043,7 +1090,6 @@ pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *regs; struct pt1 *pt1; struct i2c_adapter *i2c_adap; - struct task_struct *kthread; ret = pci_enable_device(pdev); if (ret < 0) @@ -1139,17 +1185,8 @@ pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret < 0) goto err_pt1_cleanup_frontends; - kthread = kthread_run(pt1_thread, pt1, "pt1"); - if (IS_ERR(kthread)) { - ret = PTR_ERR(kthread); - goto err_pt1_cleanup_tables; - } - - pt1->kthread = kthread; return 0; -err_pt1_cleanup_tables: - pt1_cleanup_tables(pt1); err_pt1_cleanup_frontends: pt1_cleanup_frontends(pt1); err_pt1_disable_ram: diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c index 7b42ace419d9..421cf73858d3 100644 --- a/drivers/media/media-devnode.c +++ b/drivers/media/media-devnode.c @@ -312,7 +312,7 @@ static void __exit media_devnode_exit(void) unregister_chrdev_region(media_dev_t, MEDIA_NUM_DEVICES); } -module_init(media_devnode_init) +subsys_initcall(media_devnode_init); module_exit(media_devnode_exit) MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index e954781c90bf..8db2d7f4b52a 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -43,7 +43,7 @@ config USB_DSBR config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" - depends on VIDEO_V4L2 && PCI + depends on VIDEO_V4L2 && PCI && SND ---help--- Choose Y here if you have this radio card. This card may also be found as Gemtek PCI FM. @@ -80,6 +80,16 @@ config RADIO_SI4713 To compile this driver as a module, choose M here: the module will be called radio-si4713. +config USB_KEENE + tristate "Keene FM Transmitter USB support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of FM transmitter + to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-keene. + config RADIO_TEA5764 tristate "TEA5764 I2C FM radio support" depends on I2C && VIDEO_V4L2 @@ -167,6 +177,10 @@ menuconfig V4L_RADIO_ISA_DRIVERS if V4L_RADIO_ISA_DRIVERS +config RADIO_ISA + depends on ISA + tristate + config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA && VIDEO_V4L2 @@ -174,20 +188,13 @@ config RADIO_CADET Choose Y here if you have one of these AM/FM radio cards, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - Further documentation on this driver can be found on the WWW at - <http://linux.blackhawke.net/cadet/>. - To compile this driver as a module, choose M here: the module will be called radio-cadet. config RADIO_RTRACK tristate "AIMSlab RadioTrack (aka RadioReveal) support" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. @@ -201,11 +208,7 @@ config RADIO_RTRACK You must also pass the module a suitable io parameter, 0x248 has been reported to be used by these cards. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. More information is - contained in the file + More information is contained in the file <file:Documentation/video4linux/radiotrack.txt>. To compile this driver as a module, choose M here: the @@ -214,7 +217,7 @@ config RADIO_RTRACK config RADIO_RTRACK_PORT hex "RadioTrack i/o port (0x20f or 0x30f)" depends on RADIO_RTRACK=y - default "20f" + default "30f" help Enter either 0x30f or 0x20f here. The card default is 0x30f, if you haven't changed the jumper setting on the card. @@ -222,14 +225,14 @@ config RADIO_RTRACK_PORT config RADIO_RTRACK2 tristate "AIMSlab RadioTrack II support" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have this FM radio card, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-rtrack2. @@ -245,15 +248,11 @@ config RADIO_RTRACK2_PORT config RADIO_AZTECH tristate "Aztech/Packard Bell Radio" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-aztech. @@ -269,6 +268,7 @@ config RADIO_AZTECH_PORT config RADIO_GEMTEK tristate "GemTek Radio card (or compatible) support" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have this FM radio card, and then fill in the I/O port address and settings below. The following cards either have @@ -278,23 +278,21 @@ config RADIO_GEMTEK - Typhoon Radio card (some models) - Hama Radio card - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-gemtek. config RADIO_GEMTEK_PORT - hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" + hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" depends on RADIO_GEMTEK=y default "34c" help - Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is - 0x34c, if you haven't changed the jumper setting on the card. On - Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O + Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The + card default is 0x34c, if you haven't changed the jumper setting + on the card. + + On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O port is 0x20c, 0x248 or 0x28c. + If automatic I/O port probing is enabled this port will be used only in case of automatic probing failure, ie. as a fallback. @@ -318,11 +316,6 @@ config RADIO_MIROPCM20 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this is required for the radio-miropcm20. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-miropcm20. @@ -332,11 +325,6 @@ config RADIO_SF16FMI ---help--- Choose Y here if you have one of these FM radio cards. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - To compile this driver as a module, choose M here: the module will be called radio-sf16fmi. @@ -346,50 +334,35 @@ config RADIO_SF16FMR2 ---help--- Choose Y here if you have one of these FM radio cards. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found on the WWW at - <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. - To compile this driver as a module, choose M here: the module will be called radio-sf16fmr2. config RADIO_TERRATEC tristate "TerraTec ActiveRadio ISA Standalone" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- - Choose Y here if you have this FM radio card, and then fill in the - port address below. (TODO) + Choose Y here if you have this FM radio card. - Note: This driver is in its early stages. Right now volume and - frequency control and muting works at least for me, but - unfortunately I have not found anybody who wants to use this card - with Linux. So if it is this what YOU are trying to do right now, - PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-terratec. -config RADIO_TERRATEC_PORT - hex "Terratec i/o port (normally 0x590)" - depends on RADIO_TERRATEC=y - default "590" - help - Fill in the I/O port of your TerraTec FM radio card. If unsure, go - with the default. - config RADIO_TRUST tristate "Trust FM radio card" depends on ISA && VIDEO_V4L2 + select RADIO_ISA help This is a driver for the Trust FM radio cards. Say Y if you have such a card and want to use it under Linux. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. + To compile this driver as a module, choose M here: the module will be called radio-trust. @@ -404,14 +377,14 @@ config RADIO_TRUST_PORT config RADIO_TYPHOON tristate "Typhoon Radio (a.k.a. EcoRadio)" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address and the frequency used for muting below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-typhoon. @@ -438,14 +411,14 @@ config RADIO_TYPHOON_MUTEFREQ config RADIO_ZOLTRIX tristate "Zoltrix Radio" depends on ISA && VIDEO_V4L2 + select RADIO_ISA ---help--- Choose Y here if you have one of these FM radio cards, and then fill in the port address below. - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + Note: this driver hasn't been tested since a long time due to lack + of hardware. If you have this hardware, then please contact the + linux-media mailinglist. To compile this driver as a module, choose M here: the module will be called radio-zoltrix. diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index 390daf94d847..ca8c7d134b95 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -2,6 +2,7 @@ # Makefile for the kernel character device drivers. # +obj-$(CONFIG_RADIO_ISA) += radio-isa.o obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o @@ -20,6 +21,7 @@ obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o +obj-$(CONFIG_USB_KEENE) += radio-keene.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 1c3f8440a55c..98e0c8c20312 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -1,16 +1,13 @@ -/* radiotrack (radioreveal) driver for Linux radio support - * (c) 1997 M. Kirkwood +/* + * AimsLab RadioTrack (aka RadioVeveal) driver + * + * Copyright 1997 M. Kirkwood + * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * - * History: - * 1999-02-24 Russell Kroll <rkroll@exploits.org> - * Fine tuning/VIDEO_TUNER_LOW - * Frequency range expanded to start at 87 MHz - * - * TODO: Allow for more than one of these foolish entities :-) - * * Notes on the hardware (reverse engineered from other peoples' * reverse engineering of AIMS' code :-) * @@ -26,6 +23,7 @@ * wait(a_wee_while); * out(port, stop_changing_the_volume); * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -34,401 +32,179 @@ #include <linux/delay.h> /* msleep */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include "radio-isa.h" -MODULE_AUTHOR("M.Kirkwood"); +MODULE_AUTHOR("M. Kirkwood"); MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("1.0.0"); #ifndef CONFIG_RADIO_RTRACK_PORT #define CONFIG_RADIO_RTRACK_PORT -1 #endif -static int io = CONFIG_RADIO_RTRACK_PORT; -static int radio_nr = -1; +#define RTRACK_MAX 2 -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20f or 0x30f)"); -module_param(radio_nr, int, 0); +static int io[RTRACK_MAX] = { [0] = CONFIG_RADIO_RTRACK_PORT, + [1 ... (RTRACK_MAX - 1)] = -1 }; +static int radio_nr[RTRACK_MAX] = { [0 ... (RTRACK_MAX - 1)] = -1 }; -struct rtrack -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - int port; +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + +struct rtrack { + struct radio_isa_card isa; int curvol; - unsigned long curfreq; - int muted; - int io; - struct mutex lock; }; -static struct rtrack rtrack_card; - -/* local things */ - -static void rt_decvol(struct rtrack *rt) -{ - outb(0x58, rt->io); /* volume down + sigstr + on */ - msleep(100); - outb(0xd8, rt->io); /* volume steady + sigstr + on */ -} - -static void rt_incvol(struct rtrack *rt) -{ - outb(0x98, rt->io); /* volume up + sigstr + on */ - msleep(100); - outb(0xd8, rt->io); /* volume steady + sigstr + on */ -} - -static void rt_mute(struct rtrack *rt) -{ - rt->muted = 1; - mutex_lock(&rt->lock); - outb(0xd0, rt->io); /* volume steady, off */ - mutex_unlock(&rt->lock); -} - -static int rt_setvol(struct rtrack *rt, int vol) +static struct radio_isa_card *rtrack_alloc(void) { - int i; - - mutex_lock(&rt->lock); - - if (vol == rt->curvol) { /* requested volume = current */ - if (rt->muted) { /* user is unmuting the card */ - rt->muted = 0; - outb(0xd8, rt->io); /* enable card */ - } - mutex_unlock(&rt->lock); - return 0; - } - - if (vol == 0) { /* volume = 0 means mute the card */ - outb(0x48, rt->io); /* volume down but still "on" */ - msleep(2000); /* make sure it's totally down */ - outb(0xd0, rt->io); /* volume steady, off */ - rt->curvol = 0; /* track the volume state! */ - mutex_unlock(&rt->lock); - return 0; - } + struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL); - rt->muted = 0; - if (vol > rt->curvol) - for (i = rt->curvol; i < vol; i++) - rt_incvol(rt); - else - for (i = rt->curvol; i > vol; i--) - rt_decvol(rt); - - rt->curvol = vol; - mutex_unlock(&rt->lock); - return 0; + if (rt) + rt->curvol = 0xff; + return rt ? &rt->isa : NULL; } -/* the 128+64 on these outb's is to keep the volume stable while tuning - * without them, the volume _will_ creep up with each frequency change - * and bit 4 (+16) is to keep the signal strength meter enabled +/* The 128+64 on these outb's is to keep the volume stable while tuning. + * Without them, the volume _will_ creep up with each frequency change + * and bit 4 (+16) is to keep the signal strength meter enabled. */ -static void send_0_byte(struct rtrack *rt) +static void send_0_byte(struct radio_isa_card *isa, int on) { - if (rt->curvol == 0 || rt->muted) { - outb_p(128+64+16+ 1, rt->io); /* wr-enable + data low */ - outb_p(128+64+16+2+1, rt->io); /* clock */ - } - else { - outb_p(128+64+16+8+ 1, rt->io); /* on + wr-enable + data low */ - outb_p(128+64+16+8+2+1, rt->io); /* clock */ - } + outb_p(128+64+16+on+1, isa->io); /* wr-enable + data low */ + outb_p(128+64+16+on+2+1, isa->io); /* clock */ msleep(1); } -static void send_1_byte(struct rtrack *rt) +static void send_1_byte(struct radio_isa_card *isa, int on) { - if (rt->curvol == 0 || rt->muted) { - outb_p(128+64+16+4 +1, rt->io); /* wr-enable+data high */ - outb_p(128+64+16+4+2+1, rt->io); /* clock */ - } - else { - outb_p(128+64+16+8+4 +1, rt->io); /* on+wr-enable+data high */ - outb_p(128+64+16+8+4+2+1, rt->io); /* clock */ - } - + outb_p(128+64+16+on+4+1, isa->io); /* wr-enable+data high */ + outb_p(128+64+16+on+4+2+1, isa->io); /* clock */ msleep(1); } -static int rt_setfreq(struct rtrack *rt, unsigned long freq) +static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq) { + int on = v4l2_ctrl_g_ctrl(isa->mute) ? 0 : 8; int i; - mutex_lock(&rt->lock); /* Stop other ops interfering */ - - rt->curfreq = freq; - - /* now uses VIDEO_TUNER_LOW for fine tuning */ - freq += 171200; /* Add 10.7 MHz IF */ freq /= 800; /* Convert to 50 kHz units */ - send_0_byte(rt); /* 0: LSB of frequency */ + send_0_byte(isa, on); /* 0: LSB of frequency */ for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ if (freq & (1 << i)) - send_1_byte(rt); + send_1_byte(isa, on); else - send_0_byte(rt); - - send_0_byte(rt); /* 14: test bit - always 0 */ - send_0_byte(rt); /* 15: test bit - always 0 */ - - send_0_byte(rt); /* 16: band data 0 - always 0 */ - send_0_byte(rt); /* 17: band data 1 - always 0 */ - send_0_byte(rt); /* 18: band data 2 - always 0 */ - send_0_byte(rt); /* 19: time base - always 0 */ - - send_0_byte(rt); /* 20: spacing (0 = 25 kHz) */ - send_1_byte(rt); /* 21: spacing (1 = 25 kHz) */ - send_0_byte(rt); /* 22: spacing (0 = 25 kHz) */ - send_1_byte(rt); /* 23: AM/FM (FM = 1, always) */ - - if (rt->curvol == 0 || rt->muted) - outb(0xd0, rt->io); /* volume steady + sigstr */ - else - outb(0xd8, rt->io); /* volume steady + sigstr + on */ - - mutex_unlock(&rt->lock); - - return 0; -} - -static int rt_getsigstr(struct rtrack *rt) -{ - int sig = 1; - - mutex_lock(&rt->lock); - if (inb(rt->io) & 2) /* bit set = no signal present */ - sig = 0; - mutex_unlock(&rt->lock); - return sig; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-aimslab", sizeof(v->driver)); - strlcpy(v->card, "RadioTrack", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct rtrack *rt = video_drvdata(file); + send_0_byte(isa, on); - if (v->index > 0) - return -EINVAL; + send_0_byte(isa, on); /* 14: test bit - always 0 */ + send_0_byte(isa, on); /* 15: test bit - always 0 */ - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xffff * rt_getsigstr(rt); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct rtrack *rt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - rt_setfreq(rt, f->frequency); - return 0; -} + send_0_byte(isa, on); /* 16: band data 0 - always 0 */ + send_0_byte(isa, on); /* 17: band data 1 - always 0 */ + send_0_byte(isa, on); /* 18: band data 2 - always 0 */ + send_0_byte(isa, on); /* 19: time base - always 0 */ -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct rtrack *rt = video_drvdata(file); + send_0_byte(isa, on); /* 20: spacing (0 = 25 kHz) */ + send_1_byte(isa, on); /* 21: spacing (1 = 25 kHz) */ + send_0_byte(isa, on); /* 22: spacing (0 = 25 kHz) */ + send_1_byte(isa, on); /* 23: AM/FM (FM = 1, always) */ - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = rt->curfreq; + outb(0xd0 + on, isa->io); /* volume steady + sigstr */ return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) +static u32 rtrack_g_signal(struct radio_isa_card *isa) { - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff); - } - return -EINVAL; + /* bit set = no signal present */ + return 0xffff * !(inb(isa->io) & 2); } -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int rtrack_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - struct rtrack *rt = video_drvdata(file); + struct rtrack *rt = container_of(isa, struct rtrack, isa); + int curvol = rt->curvol; - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = rt->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = rt->curvol; + if (mute) { + outb(0xd0, isa->io); /* volume steady + sigstr + off */ return 0; } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct rtrack *rt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - rt_mute(rt); - else - rt_setvol(rt, rt->curvol); - return 0; - case V4L2_CID_AUDIO_VOLUME: - rt_setvol(rt, ctrl->value); - return 0; + if (vol == 0) { /* volume = 0 means mute the card */ + outb(0x48, isa->io); /* volume down but still "on" */ + msleep(curvol * 3); /* make sure it's totally down */ + } else if (curvol < vol) { + outb(0x98, isa->io); /* volume up + sigstr + on */ + for (; curvol < vol; curvol++) + udelay(3000); + } else if (curvol > vol) { + outb(0x58, isa->io); /* volume down + sigstr + on */ + for (; curvol > vol; curvol--) + udelay(3000); } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; + outb(0xd8, isa->io); /* volume steady + sigstr + on */ + rt->curvol = vol; return 0; } -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) +/* Mute card - prevents noisy bootups */ +static int rtrack_initialize(struct radio_isa_card *isa) { - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; + /* this ensures that the volume is all the way up */ + outb(0x90, isa->io); /* volume up but still "on" */ + msleep(3000); /* make sure it's totally up */ + outb(0xc0, isa->io); /* steady volume, mute card */ return 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static const struct v4l2_file_operations rtrack_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops rtrack_ops = { + .alloc = rtrack_alloc, + .init = rtrack_initialize, + .s_mute_volume = rtrack_s_mute_volume, + .s_frequency = rtrack_s_frequency, + .g_signal = rtrack_g_signal, }; -static const struct v4l2_ioctl_ops rtrack_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int rtrack_ioports[] = { 0x20f, 0x30f }; + +static struct radio_isa_driver rtrack_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-aimslab", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = rtrack_ioports, + .num_of_io_ports = ARRAY_SIZE(rtrack_ioports), + .region_size = 2, + .card = "AIMSlab RadioTrack/RadioReveal", + .ops = &rtrack_ops, + .has_stereo = true, + .max_volume = 0xff, }; static int __init rtrack_init(void) { - struct rtrack *rt = &rtrack_card; - struct v4l2_device *v4l2_dev = &rt->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "rtrack", sizeof(v4l2_dev->name)); - rt->io = io; - - if (rt->io == -1) { - v4l2_err(v4l2_dev, "you must set an I/O address with io=0x20f or 0x30f\n"); - return -EINVAL; - } - - if (!request_region(rt->io, 2, "rtrack")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", rt->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(rt->io, 2); - v4l2_err(v4l2_dev, "could not register v4l2_device\n"); - return res; - } - - strlcpy(rt->vdev.name, v4l2_dev->name, sizeof(rt->vdev.name)); - rt->vdev.v4l2_dev = v4l2_dev; - rt->vdev.fops = &rtrack_fops; - rt->vdev.ioctl_ops = &rtrack_ioctl_ops; - rt->vdev.release = video_device_release_empty; - video_set_drvdata(&rt->vdev, rt); - - /* Set up the I/O locking */ - - mutex_init(&rt->lock); - - /* mute card - prevents noisy bootups */ - - /* this ensures that the volume is all the way down */ - outb(0x48, rt->io); /* volume down but still "on" */ - msleep(2000); /* make sure it's totally down */ - outb(0xc0, rt->io); /* steady volume, mute card */ - - if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(&rt->v4l2_dev); - release_region(rt->io, 2); - return -EINVAL; - } - v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n"); - - return 0; + return isa_register_driver(&rtrack_driver.driver, RTRACK_MAX); } static void __exit rtrack_exit(void) { - struct rtrack *rt = &rtrack_card; - - video_unregister_device(&rt->vdev); - v4l2_device_unregister(&rt->v4l2_dev); - release_region(rt->io, 2); + isa_unregister_driver(&rtrack_driver.driver); } module_init(rtrack_init); module_exit(rtrack_exit); - diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index eed7b0840734..177bcbd7a7c1 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -1,5 +1,7 @@ -/* radio-aztech.c - Aztech radio card driver for Linux 2.2 +/* + * radio-aztech.c - Aztech radio card driver * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@xs4all.nl> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> * Adapted to support the Video for Linux API by * Russell Kroll <rkroll@exploits.org>. Based on original tuner code by: @@ -10,19 +12,7 @@ * Scott McGrath (smcgrath@twilight.vtc.vsc.edu) * William McGrath (wmcgrath@twilight.vtc.vsc.edu) * - * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/ - * along with more information on the card itself. - * - * History: - * 1999-02-24 Russell Kroll <rkroll@exploits.org> - * Fine tuning/VIDEO_TUNER_LOW - * Range expanded to 87-108 MHz (from 87.9-107.8) - * - * Notable changes from the original source: - * - includes stripped down to the essentials - * - for loops used as delays replaced with udelay() - * - #defines removed, changed to static values - * - tuning structure changed - no more character arrays, other changes + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -31,126 +21,72 @@ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include "radio-isa.h" MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the Aztech radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("1.0.0"); /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ - #ifndef CONFIG_RADIO_AZTECH_PORT #define CONFIG_RADIO_AZTECH_PORT -1 #endif -static int io = CONFIG_RADIO_AZTECH_PORT; -static int radio_nr = -1; -static int radio_wait_time = 1000; +#define AZTECH_MAX 2 -module_param(io, int, 0); -module_param(radio_nr, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)"); +static int io[AZTECH_MAX] = { [0] = CONFIG_RADIO_AZTECH_PORT, + [1 ... (AZTECH_MAX - 1)] = -1 }; +static int radio_nr[AZTECH_MAX] = { [0 ... (AZTECH_MAX - 1)] = -1 }; +static const int radio_wait_time = 1000; -struct aztech -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Aztech card (0x350 or 0x358)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + +struct aztech { + struct radio_isa_card isa; int curvol; - unsigned long curfreq; - int stereo; - struct mutex lock; }; -static struct aztech aztech_card; - -static int volconvert(int level) -{ - level >>= 14; /* Map 16bits down to 2 bit */ - level &= 3; - - /* convert to card-friendly values */ - switch (level) { - case 0: - return 0; - case 1: - return 1; - case 2: - return 4; - case 3: - return 5; - } - return 0; /* Quieten gcc */ -} - static void send_0_byte(struct aztech *az) { udelay(radio_wait_time); - outb_p(2 + volconvert(az->curvol), az->io); - outb_p(64 + 2 + volconvert(az->curvol), az->io); + outb_p(2 + az->curvol, az->isa.io); + outb_p(64 + 2 + az->curvol, az->isa.io); } static void send_1_byte(struct aztech *az) { - udelay (radio_wait_time); - outb_p(128 + 2 + volconvert(az->curvol), az->io); - outb_p(128 + 64 + 2 + volconvert(az->curvol), az->io); -} - -static int az_setvol(struct aztech *az, int vol) -{ - mutex_lock(&az->lock); - outb(volconvert(vol), az->io); - mutex_unlock(&az->lock); - return 0; -} - -/* thanks to Michael Dwyer for giving me a dose of clues in - * the signal strength department.. - * - * This card has a stereo bit - bit 0 set = mono, not set = stereo - * It also has a "signal" bit - bit 1 set = bad signal, not set = good - * - */ - -static int az_getsigstr(struct aztech *az) -{ - int sig = 1; - - mutex_lock(&az->lock); - if (inb(az->io) & 2) /* bit set = no signal present */ - sig = 0; - mutex_unlock(&az->lock); - return sig; + udelay(radio_wait_time); + outb_p(128 + 2 + az->curvol, az->isa.io); + outb_p(128 + 64 + 2 + az->curvol, az->isa.io); } -static int az_getstereo(struct aztech *az) +static struct radio_isa_card *aztech_alloc(void) { - int stereo = 1; + struct aztech *az = kzalloc(sizeof(*az), GFP_KERNEL); - mutex_lock(&az->lock); - if (inb(az->io) & 1) /* bit set = mono */ - stereo = 0; - mutex_unlock(&az->lock); - return stereo; + return az ? &az->isa : NULL; } -static int az_setfreq(struct aztech *az, unsigned long frequency) +static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq) { + struct aztech *az = container_of(isa, struct aztech, isa); int i; - mutex_lock(&az->lock); - - az->curfreq = frequency; - frequency += 171200; /* Add 10.7 MHz IF */ - frequency /= 800; /* Convert to 50 kHz units */ + freq += 171200; /* Add 10.7 MHz IF */ + freq /= 800; /* Convert to 50 kHz units */ send_0_byte(az); /* 0: LSB of frequency */ for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ - if (frequency & (1 << i)) + if (freq & (1 << i)) send_1_byte(az); else send_0_byte(az); @@ -158,7 +94,7 @@ static int az_setfreq(struct aztech *az, unsigned long frequency) send_0_byte(az); /* 14: test bit - always 0 */ send_0_byte(az); /* 15: test bit - always 0 */ send_0_byte(az); /* 16: band data 0 - always 0 */ - if (az->stereo) /* 17: stereo (1 to enable) */ + if (isa->stereo) /* 17: stereo (1 to enable) */ send_1_byte(az); else send_0_byte(az); @@ -173,225 +109,77 @@ static int az_setfreq(struct aztech *az, unsigned long frequency) /* latch frequency */ udelay(radio_wait_time); - outb_p(128 + 64 + volconvert(az->curvol), az->io); - - mutex_unlock(&az->lock); - - return 0; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-aztech", sizeof(v->driver)); - strlcpy(v->card, "Aztech Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct aztech *az = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - - v->rangelow = 87 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (az_getstereo(az)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * az_getsigstr(az); - - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} + outb_p(128 + 64 + az->curvol, az->isa.io); -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; return 0; } -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +/* thanks to Michael Dwyer for giving me a dose of clues in + * the signal strength department.. + * + * This card has a stereo bit - bit 0 set = mono, not set = stereo + */ +static u32 aztech_g_rxsubchans(struct radio_isa_card *isa) { - return a->index ? -EINVAL : 0; + if (inb(isa->io) & 1) + return V4L2_TUNER_SUB_MONO; + return V4L2_TUNER_SUB_STEREO; } -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static int aztech_s_stereo(struct radio_isa_card *isa, bool stereo) { - struct aztech *az = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - az_setfreq(az, f->frequency); - return 0; + return aztech_s_frequency(isa, isa->freq); } -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static int aztech_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - struct aztech *az = video_drvdata(file); + struct aztech *az = container_of(isa, struct aztech, isa); - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = az->curfreq; + if (mute) + vol = 0; + az->curvol = (vol & 1) + ((vol & 2) << 1); + outb(az->curvol, isa->io); return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct aztech *az = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (az->curvol == 0) - ctrl->value = 1; - else - ctrl->value = 0; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = az->curvol * 6554; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct aztech *az = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - az_setvol(az, 0); - else - az_setvol(az, az->curvol); - return 0; - case V4L2_CID_AUDIO_VOLUME: - az_setvol(az, ctrl->value); - return 0; - } - return -EINVAL; -} - -static const struct v4l2_file_operations aztech_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops aztech_ops = { + .alloc = aztech_alloc, + .s_mute_volume = aztech_s_mute_volume, + .s_frequency = aztech_s_frequency, + .s_stereo = aztech_s_stereo, + .g_rxsubchans = aztech_g_rxsubchans, }; -static const struct v4l2_ioctl_ops aztech_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int aztech_ioports[] = { 0x350, 0x358 }; + +static struct radio_isa_driver aztech_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-aztech", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = aztech_ioports, + .num_of_io_ports = ARRAY_SIZE(aztech_ioports), + .region_size = 2, + .card = "Aztech Radio", + .ops = &aztech_ops, + .has_stereo = true, + .max_volume = 3, }; static int __init aztech_init(void) { - struct aztech *az = &aztech_card; - struct v4l2_device *v4l2_dev = &az->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "aztech", sizeof(v4l2_dev->name)); - az->io = io; - - if (az->io == -1) { - v4l2_err(v4l2_dev, "you must set an I/O address with io=0x350 or 0x358\n"); - return -EINVAL; - } - - if (!request_region(az->io, 2, "aztech")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", az->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(az->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - mutex_init(&az->lock); - strlcpy(az->vdev.name, v4l2_dev->name, sizeof(az->vdev.name)); - az->vdev.v4l2_dev = v4l2_dev; - az->vdev.fops = &aztech_fops; - az->vdev.ioctl_ops = &aztech_ioctl_ops; - az->vdev.release = video_device_release_empty; - video_set_drvdata(&az->vdev, az); - /* mute card - prevents noisy bootups */ - outb(0, az->io); - - if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(az->io, 2); - return -EINVAL; - } - - v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n"); - return 0; + return isa_register_driver(&aztech_driver.driver, AZTECH_MAX); } static void __exit aztech_exit(void) { - struct aztech *az = &aztech_card; - - video_unregister_device(&az->vdev); - v4l2_device_unregister(&az->v4l2_dev); - release_region(az->io, 2); + isa_unregister_driver(&aztech_driver.driver); } module_init(aztech_init); diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 36ce0611c037..2e639ce6f256 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -1,4 +1,7 @@ -/* GemTek radio card driver for Linux (C) 1998 Jonas Munsin <jmunsin@iki.fi> +/* + * GemTek radio card driver + * + * Copyright 1998 Jonas Munsin <jmunsin@iki.fi> * * GemTek hasn't released any specs on the card, so the protocol had to * be reverse engineered with dosemu. @@ -11,9 +14,12 @@ * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * - * TODO: Allow for more than one of these foolish entities :-) - * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> + * + * Note: this card seems to swap the left and right audio channels! + * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -23,8 +29,10 @@ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> +#include "radio-isa.h" /* * Module info. @@ -33,7 +41,7 @@ MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); MODULE_DESCRIPTION("A driver for the GemTek Radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.4"); +MODULE_VERSION("1.0.0"); /* * Module params. @@ -46,45 +54,29 @@ MODULE_VERSION("0.0.4"); #define CONFIG_RADIO_GEMTEK_PROBE 1 #endif -static int io = CONFIG_RADIO_GEMTEK_PORT; -static bool probe = CONFIG_RADIO_GEMTEK_PROBE; -static bool hardmute; -static bool shutdown = 1; -static bool keepmuted = 1; -static bool initmute = 1; -static int radio_nr = -1; +#define GEMTEK_MAX 4 -module_param(io, int, 0444); -MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic " - "probing is disabled or fails. The most common I/O ports are: 0x20c " - "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " - "work for the combined sound/radiocard)."); +static bool probe = CONFIG_RADIO_GEMTEK_PROBE; +static bool hardmute; +static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT, + [1 ... (GEMTEK_MAX - 1)] = -1 }; +static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; module_param(probe, bool, 0444); -MODULE_PARM_DESC(probe, "Enable automatic device probing. Note: only the most " - "common I/O ports used by the card are probed."); +MODULE_PARM_DESC(probe, "Enable automatic device probing."); module_param(hardmute, bool, 0644); -MODULE_PARM_DESC(hardmute, "Enable `hard muting' by shutting down PLL, may " +MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may " "reduce static noise."); -module_param(shutdown, bool, 0644); -MODULE_PARM_DESC(shutdown, "Enable shutting down PLL and muting line when " - "module is unloaded."); - -module_param(keepmuted, bool, 0644); -MODULE_PARM_DESC(keepmuted, "Keep card muted even when frequency is changed."); - -module_param(initmute, bool, 0444); -MODULE_PARM_DESC(initmute, "Mute card when module is loaded."); - -module_param(radio_nr, int, 0444); +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic " + "probing is disabled or fails. The most common I/O ports are: 0x20c " + "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " + "work for the combined sound/radiocard)."); -/* - * Functions for controlling the card. - */ -#define GEMTEK_LOWFREQ (87*16000) -#define GEMTEK_HIGHFREQ (108*16000) +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); /* * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal @@ -108,18 +100,11 @@ module_param(radio_nr, int, 0444); #define LONG_DELAY 75 /* usec */ struct gemtek { - struct v4l2_device v4l2_dev; - struct video_device vdev; - struct mutex lock; - unsigned long lastfreq; - int muted; - int verified; - int io; + struct radio_isa_card isa; + bool muted; u32 bu2614data; }; -static struct gemtek gemtek_card; - #define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */ #define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */ #define BU2614_VOID_BITS 4 /* unused */ @@ -166,31 +151,24 @@ static struct gemtek gemtek_card; */ static void gemtek_bu2614_transmit(struct gemtek *gt) { + struct radio_isa_card *isa = >->isa; int i, bit, q, mute; - mutex_lock(>->lock); - mute = gt->muted ? GEMTEK_MT : 0x00; - outb_p(mute | GEMTEK_DA | GEMTEK_CK, gt->io); - udelay(SHORT_DELAY); - outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, gt->io); + outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); udelay(LONG_DELAY); for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { bit = (q & 1) ? GEMTEK_DA : 0; - outb_p(mute | GEMTEK_CE | bit, gt->io); + outb_p(mute | GEMTEK_CE | bit, isa->io); udelay(SHORT_DELAY); - outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, gt->io); + outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); udelay(SHORT_DELAY); } - outb_p(mute | GEMTEK_DA | GEMTEK_CK, gt->io); + outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); udelay(SHORT_DELAY); - outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, gt->io); - udelay(LONG_DELAY); - - mutex_unlock(>->lock); } /* @@ -198,21 +176,27 @@ static void gemtek_bu2614_transmit(struct gemtek *gt) */ static unsigned long gemtek_convfreq(unsigned long freq) { - return ((freq<<FSCALE) + IF_OFFSET + REF_FREQ/2) / REF_FREQ; + return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; +} + +static struct radio_isa_card *gemtek_alloc(void) +{ + struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); + + if (gt) + gt->muted = true; + return gt ? >->isa : NULL; } /* * Set FM-frequency. */ -static void gemtek_setfreq(struct gemtek *gt, unsigned long freq) +static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) { - if (keepmuted && hardmute && gt->muted) - return; + struct gemtek *gt = container_of(isa, struct gemtek, isa); - freq = clamp_val(freq, GEMTEK_LOWFREQ, GEMTEK_HIGHFREQ); - - gt->lastfreq = freq; - gt->muted = 0; + if (hardmute && gt->muted) + return 0; gemtek_bu2614_set(gt, BU2614_PORT, 0); gemtek_bu2614_set(gt, BU2614_FMES, 0); @@ -220,23 +204,25 @@ static void gemtek_setfreq(struct gemtek *gt, unsigned long freq) gemtek_bu2614_set(gt, BU2614_SWAL, 0); gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ gemtek_bu2614_set(gt, BU2614_TEST, 0); - gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); - gemtek_bu2614_transmit(gt); + return 0; } /* * Set mute flag. */ -static void gemtek_mute(struct gemtek *gt) +static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { + struct gemtek *gt = container_of(isa, struct gemtek, isa); int i; - gt->muted = 1; - + gt->muted = mute; if (hardmute) { + if (!mute) + return gemtek_s_frequency(isa, isa->freq); + /* Turn off PLL, disable data output */ gemtek_bu2614_set(gt, BU2614_PORT, 0); gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ @@ -247,367 +233,85 @@ static void gemtek_mute(struct gemtek *gt) gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); gemtek_bu2614_set(gt, BU2614_FREQ, 0); gemtek_bu2614_transmit(gt); - return; + return 0; } - mutex_lock(>->lock); - /* Read bus contents (CE, CK and DA). */ - i = inb_p(gt->io); + i = inb_p(isa->io); /* Write it back with mute flag set. */ - outb_p((i >> 5) | GEMTEK_MT, gt->io); + outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); udelay(SHORT_DELAY); - - mutex_unlock(>->lock); -} - -/* - * Unset mute flag. - */ -static void gemtek_unmute(struct gemtek *gt) -{ - int i; - - gt->muted = 0; - if (hardmute) { - /* Turn PLL back on. */ - gemtek_setfreq(gt, gt->lastfreq); - return; - } - mutex_lock(>->lock); - - i = inb_p(gt->io); - outb_p(i >> 5, gt->io); - udelay(SHORT_DELAY); - - mutex_unlock(>->lock); + return 0; } -/* - * Get signal strength (= stereo status). - */ -static inline int gemtek_getsigstr(struct gemtek *gt) +static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) { - int sig; - - mutex_lock(>->lock); - sig = inb_p(gt->io) & GEMTEK_NS ? 0 : 1; - mutex_unlock(>->lock); - return sig; + if (inb_p(isa->io) & GEMTEK_NS) + return V4L2_TUNER_SUB_MONO; + return V4L2_TUNER_SUB_STEREO; } /* * Check if requested card acts like GemTek Radio card. */ -static int gemtek_verify(struct gemtek *gt, int port) +static bool gemtek_probe(struct radio_isa_card *isa, int io) { int i, q; - if (gt->verified == port) - return 1; - - mutex_lock(>->lock); - - q = inb_p(port); /* Read bus contents before probing. */ + q = inb_p(io); /* Read bus contents before probing. */ /* Try to turn on CE, CK and DA respectively and check if card responds properly. */ for (i = 0; i < 3; ++i) { - outb_p(1 << i, port); + outb_p(1 << i, io); udelay(SHORT_DELAY); - if ((inb_p(port) & (~GEMTEK_NS)) != (0x17 | (1 << (i + 5)))) { - mutex_unlock(>->lock); - return 0; - } + if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) + return false; } - outb_p(q >> 5, port); /* Write bus contents back. */ + outb_p(q >> 5, io); /* Write bus contents back. */ udelay(SHORT_DELAY); - - mutex_unlock(>->lock); - gt->verified = port; - - return 1; -} - -/* - * Automatic probing for card. - */ -static int gemtek_probe(struct gemtek *gt) -{ - struct v4l2_device *v4l2_dev = >->v4l2_dev; - int ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; - int i; - - if (!probe) { - v4l2_info(v4l2_dev, "Automatic device probing disabled.\n"); - return -1; - } - - v4l2_info(v4l2_dev, "Automatic device probing enabled.\n"); - - for (i = 0; i < ARRAY_SIZE(ioports); ++i) { - v4l2_info(v4l2_dev, "Trying I/O port 0x%x...\n", ioports[i]); - - if (!request_region(ioports[i], 1, "gemtek-probe")) { - v4l2_warn(v4l2_dev, "I/O port 0x%x busy!\n", - ioports[i]); - continue; - } - - if (gemtek_verify(gt, ioports[i])) { - v4l2_info(v4l2_dev, "Card found from I/O port " - "0x%x!\n", ioports[i]); - - release_region(ioports[i], 1); - gt->io = ioports[i]; - return gt->io; - } - - release_region(ioports[i], 1); - } - - v4l2_err(v4l2_dev, "Automatic probing failed!\n"); - return -1; + return true; } -/* - * Video 4 Linux stuff. - */ - -static const struct v4l2_file_operations gemtek_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops gemtek_ops = { + .alloc = gemtek_alloc, + .probe = gemtek_probe, + .s_mute_volume = gemtek_s_mute_volume, + .s_frequency = gemtek_s_frequency, + .g_rxsubchans = gemtek_g_rxsubchans, }; -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-gemtek", sizeof(v->driver)); - strlcpy(v->card, "GemTek", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) -{ - struct gemtek *gt = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = GEMTEK_LOWFREQ; - v->rangehigh = GEMTEK_HIGHFREQ; - v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; - v->signal = 0xffff * gemtek_getsigstr(gt); - if (v->signal) { - v->audmode = V4L2_TUNER_MODE_STEREO; - v->rxsubchans = V4L2_TUNER_SUB_STEREO; - } else { - v->audmode = V4L2_TUNER_MODE_MONO; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - } - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) -{ - return (v->index != 0) ? -EINVAL : 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek *gt = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = gt->lastfreq; - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek *gt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - gemtek_setfreq(gt, f->frequency); - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); - default: - return -EINVAL; - } -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek *gt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = gt->muted; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek *gt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - gemtek_mute(gt); - else - gemtek_unmute(gt); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return (i != 0) ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - return (a->index != 0) ? -EINVAL : 0; -} - -static const struct v4l2_ioctl_ops gemtek_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl +static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; + +static struct radio_isa_driver gemtek_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-gemtek", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = gemtek_ioports, + .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), + .region_size = 1, + .card = "GemTek Radio", + .ops = &gemtek_ops, + .has_stereo = true, }; -/* - * Initialization / cleanup related stuff. - */ - static int __init gemtek_init(void) { - struct gemtek *gt = &gemtek_card; - struct v4l2_device *v4l2_dev = >->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "gemtek", sizeof(v4l2_dev->name)); - - v4l2_info(v4l2_dev, "GemTek Radio card driver: v0.0.3\n"); - - mutex_init(>->lock); - - gt->verified = -1; - gt->io = io; - gemtek_probe(gt); - if (gt->io) { - if (!request_region(gt->io, 1, "gemtek")) { - v4l2_err(v4l2_dev, "I/O port 0x%x already in use.\n", gt->io); - return -EBUSY; - } - - if (!gemtek_verify(gt, gt->io)) - v4l2_warn(v4l2_dev, "Card at I/O port 0x%x does not " - "respond properly, check your " - "configuration.\n", gt->io); - else - v4l2_info(v4l2_dev, "Using I/O port 0x%x.\n", gt->io); - } else if (probe) { - v4l2_err(v4l2_dev, "Automatic probing failed and no " - "fixed I/O port defined.\n"); - return -ENODEV; - } else { - v4l2_err(v4l2_dev, "Automatic probing disabled but no fixed " - "I/O port defined."); - return -EINVAL; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - release_region(gt->io, 1); - return res; - } - - strlcpy(gt->vdev.name, v4l2_dev->name, sizeof(gt->vdev.name)); - gt->vdev.v4l2_dev = v4l2_dev; - gt->vdev.fops = &gemtek_fops; - gt->vdev.ioctl_ops = &gemtek_ioctl_ops; - gt->vdev.release = video_device_release_empty; - video_set_drvdata(>->vdev, gt); - - /* Set defaults */ - gt->lastfreq = GEMTEK_LOWFREQ; - gt->bu2614data = 0; - - if (initmute) - gemtek_mute(gt); - - if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(gt->io, 1); - return -EBUSY; - } - - return 0; + gemtek_driver.probe = probe; + return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); } -/* - * Module cleanup - */ static void __exit gemtek_exit(void) { - struct gemtek *gt = &gemtek_card; - struct v4l2_device *v4l2_dev = >->v4l2_dev; - - if (shutdown) { - hardmute = 1; /* Turn off PLL */ - gemtek_mute(gt); - } else { - v4l2_info(v4l2_dev, "Module unloaded but card not muted!\n"); - } - - video_unregister_device(>->vdev); - v4l2_device_unregister(>->v4l2_dev); - release_region(gt->io, 1); + hardmute = 1; /* Turn off PLL */ + isa_unregister_driver(&gemtek_driver.driver); } module_init(gemtek_init); diff --git a/drivers/media/radio/radio-isa.c b/drivers/media/radio/radio-isa.c new file mode 100644 index 000000000000..06f906351fad --- /dev/null +++ b/drivers/media/radio/radio-isa.c @@ -0,0 +1,340 @@ +/* + * Framework for ISA radio drivers. + * This takes care of all the V4L2 scaffolding, allowing the ISA drivers + * to concentrate on the actual hardware operation. + * + * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> + +#include "radio-isa.h" + +MODULE_AUTHOR("Hans Verkuil"); +MODULE_DESCRIPTION("A framework for ISA radio drivers."); +MODULE_LICENSE("GPL"); + +#define FREQ_LOW (87U * 16000U) +#define FREQ_HIGH (108U * 16000U) + +static int radio_isa_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct radio_isa_card *isa = video_drvdata(file); + + strlcpy(v->driver, isa->drv->driver.driver.name, sizeof(v->driver)); + strlcpy(v->card, isa->drv->card, sizeof(v->card)); + snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", isa->v4l2_dev.name); + + v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + v->device_caps = v->capabilities | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int radio_isa_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct radio_isa_card *isa = video_drvdata(file); + const struct radio_isa_ops *ops = isa->drv->ops; + + if (v->index > 0) + return -EINVAL; + + strlcpy(v->name, "FM", sizeof(v->name)); + v->type = V4L2_TUNER_RADIO; + v->rangelow = FREQ_LOW; + v->rangehigh = FREQ_HIGH; + v->capability = V4L2_TUNER_CAP_LOW; + if (isa->drv->has_stereo) + v->capability |= V4L2_TUNER_CAP_STEREO; + + if (ops->g_rxsubchans) + v->rxsubchans = ops->g_rxsubchans(isa); + else + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + v->audmode = isa->stereo ? V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO; + if (ops->g_signal) + v->signal = ops->g_signal(isa); + else + v->signal = (v->rxsubchans & V4L2_TUNER_SUB_STEREO) ? + 0xffff : 0; + return 0; +} + +static int radio_isa_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct radio_isa_card *isa = video_drvdata(file); + const struct radio_isa_ops *ops = isa->drv->ops; + + if (v->index) + return -EINVAL; + if (ops->s_stereo) { + isa->stereo = (v->audmode == V4L2_TUNER_MODE_STEREO); + return ops->s_stereo(isa, isa->stereo); + } + return 0; +} + +static int radio_isa_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct radio_isa_card *isa = video_drvdata(file); + int res; + + if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) + return -EINVAL; + f->frequency = clamp(f->frequency, FREQ_LOW, FREQ_HIGH); + res = isa->drv->ops->s_frequency(isa, f->frequency); + if (res == 0) + isa->freq = f->frequency; + return res; +} + +static int radio_isa_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct radio_isa_card *isa = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + f->type = V4L2_TUNER_RADIO; + f->frequency = isa->freq; + return 0; +} + +static int radio_isa_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct radio_isa_card *isa = + container_of(ctrl->handler, struct radio_isa_card, hdl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + return isa->drv->ops->s_mute_volume(isa, ctrl->val, + isa->volume ? isa->volume->val : 0); + } + return -EINVAL; +} + +static int radio_isa_log_status(struct file *file, void *priv) +{ + struct radio_isa_card *isa = video_drvdata(file); + + v4l2_info(&isa->v4l2_dev, "I/O Port = 0x%03x\n", isa->io); + v4l2_ctrl_handler_log_status(&isa->hdl, isa->v4l2_dev.name); + return 0; +} + +static int radio_isa_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type == V4L2_EVENT_CTRL) + return v4l2_event_subscribe(fh, sub, 0); + return -EINVAL; +} + +static const struct v4l2_ctrl_ops radio_isa_ctrl_ops = { + .s_ctrl = radio_isa_s_ctrl, +}; + +static const struct v4l2_file_operations radio_isa_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops radio_isa_ioctl_ops = { + .vidioc_querycap = radio_isa_querycap, + .vidioc_g_tuner = radio_isa_g_tuner, + .vidioc_s_tuner = radio_isa_s_tuner, + .vidioc_g_frequency = radio_isa_g_frequency, + .vidioc_s_frequency = radio_isa_s_frequency, + .vidioc_log_status = radio_isa_log_status, + .vidioc_subscribe_event = radio_isa_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +int radio_isa_match(struct device *pdev, unsigned int dev) +{ + struct radio_isa_driver *drv = pdev->platform_data; + + return drv->probe || drv->io_params[dev] >= 0; +} +EXPORT_SYMBOL_GPL(radio_isa_match); + +static bool radio_isa_valid_io(const struct radio_isa_driver *drv, int io) +{ + int i; + + for (i = 0; i < drv->num_of_io_ports; i++) + if (drv->io_ports[i] == io) + return true; + return false; +} + +int radio_isa_probe(struct device *pdev, unsigned int dev) +{ + struct radio_isa_driver *drv = pdev->platform_data; + const struct radio_isa_ops *ops = drv->ops; + struct v4l2_device *v4l2_dev; + struct radio_isa_card *isa; + int res; + + isa = drv->ops->alloc(); + if (isa == NULL) + return -ENOMEM; + dev_set_drvdata(pdev, isa); + isa->drv = drv; + isa->io = drv->io_params[dev]; + v4l2_dev = &isa->v4l2_dev; + strlcpy(v4l2_dev->name, dev_name(pdev), sizeof(v4l2_dev->name)); + + if (drv->probe && ops->probe) { + int i; + + for (i = 0; i < drv->num_of_io_ports; ++i) { + int io = drv->io_ports[i]; + + if (request_region(io, drv->region_size, v4l2_dev->name)) { + bool found = ops->probe(isa, io); + + release_region(io, drv->region_size); + if (found) { + isa->io = io; + break; + } + } + } + } + + if (!radio_isa_valid_io(drv, isa->io)) { + int i; + + if (isa->io < 0) + return -ENODEV; + v4l2_err(v4l2_dev, "you must set an I/O address with io=0x%03x", + drv->io_ports[0]); + for (i = 1; i < drv->num_of_io_ports; i++) + printk(KERN_CONT "/0x%03x", drv->io_ports[i]); + printk(KERN_CONT ".\n"); + kfree(isa); + return -EINVAL; + } + + if (!request_region(isa->io, drv->region_size, v4l2_dev->name)) { + v4l2_err(v4l2_dev, "port 0x%x already in use\n", isa->io); + kfree(isa); + return -EBUSY; + } + + res = v4l2_device_register(pdev, v4l2_dev); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + goto err_dev_reg; + } + + v4l2_ctrl_handler_init(&isa->hdl, 1); + isa->mute = v4l2_ctrl_new_std(&isa->hdl, &radio_isa_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); + if (drv->max_volume) + isa->volume = v4l2_ctrl_new_std(&isa->hdl, &radio_isa_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, drv->max_volume, 1, + drv->max_volume); + v4l2_dev->ctrl_handler = &isa->hdl; + if (isa->hdl.error) { + res = isa->hdl.error; + v4l2_err(v4l2_dev, "Could not register controls\n"); + goto err_hdl; + } + if (drv->max_volume) + v4l2_ctrl_cluster(2, &isa->mute); + v4l2_dev->ctrl_handler = &isa->hdl; + + mutex_init(&isa->lock); + isa->vdev.lock = &isa->lock; + strlcpy(isa->vdev.name, v4l2_dev->name, sizeof(isa->vdev.name)); + isa->vdev.v4l2_dev = v4l2_dev; + isa->vdev.fops = &radio_isa_fops; + isa->vdev.ioctl_ops = &radio_isa_ioctl_ops; + isa->vdev.release = video_device_release_empty; + set_bit(V4L2_FL_USE_FH_PRIO, &isa->vdev.flags); + video_set_drvdata(&isa->vdev, isa); + isa->freq = FREQ_LOW; + isa->stereo = drv->has_stereo; + + if (ops->init) + res = ops->init(isa); + if (!res) + res = v4l2_ctrl_handler_setup(&isa->hdl); + if (!res) + res = ops->s_frequency(isa, isa->freq); + if (!res && ops->s_stereo) + res = ops->s_stereo(isa, isa->stereo); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not setup card\n"); + goto err_node_reg; + } + res = video_register_device(&isa->vdev, VFL_TYPE_RADIO, + drv->radio_nr_params[dev]); + if (res < 0) { + v4l2_err(v4l2_dev, "Could not register device node\n"); + goto err_node_reg; + } + + v4l2_info(v4l2_dev, "Initialized radio card %s on port 0x%03x\n", + drv->card, isa->io); + return 0; + +err_node_reg: + v4l2_ctrl_handler_free(&isa->hdl); +err_hdl: + v4l2_device_unregister(&isa->v4l2_dev); +err_dev_reg: + release_region(isa->io, drv->region_size); + kfree(isa); + return res; +} +EXPORT_SYMBOL_GPL(radio_isa_probe); + +int radio_isa_remove(struct device *pdev, unsigned int dev) +{ + struct radio_isa_card *isa = dev_get_drvdata(pdev); + const struct radio_isa_ops *ops = isa->drv->ops; + + ops->s_mute_volume(isa, true, isa->volume ? isa->volume->cur.val : 0); + video_unregister_device(&isa->vdev); + v4l2_ctrl_handler_free(&isa->hdl); + v4l2_device_unregister(&isa->v4l2_dev); + release_region(isa->io, isa->drv->region_size); + v4l2_info(&isa->v4l2_dev, "Removed radio card %s\n", isa->drv->card); + kfree(isa); + return 0; +} +EXPORT_SYMBOL_GPL(radio_isa_remove); diff --git a/drivers/media/radio/radio-isa.h b/drivers/media/radio/radio-isa.h new file mode 100644 index 000000000000..8a0ea84d86de --- /dev/null +++ b/drivers/media/radio/radio-isa.h @@ -0,0 +1,105 @@ +/* + * Framework for ISA radio drivers. + * This takes care of all the V4L2 scaffolding, allowing the ISA drivers + * to concentrate on the actual hardware operation. + * + * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _RADIO_ISA_H_ +#define _RADIO_ISA_H_ + +#include <linux/isa.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +struct radio_isa_driver; +struct radio_isa_ops; + +/* Core structure for radio ISA cards */ +struct radio_isa_card { + const struct radio_isa_driver *drv; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + struct video_device vdev; + struct mutex lock; + const struct radio_isa_ops *ops; + struct { /* mute/volume cluster */ + struct v4l2_ctrl *mute; + struct v4l2_ctrl *volume; + }; + /* I/O port */ + int io; + + /* Card is in stereo audio mode */ + bool stereo; + /* Current frequency */ + u32 freq; +}; + +struct radio_isa_ops { + /* Allocate and initialize a radio_isa_card struct */ + struct radio_isa_card *(*alloc)(void); + /* Probe whether a card is present at the given port */ + bool (*probe)(struct radio_isa_card *isa, int io); + /* Special card initialization can be done here, this is called after + * the standard controls are registered, but before they are setup, + * thus allowing drivers to add their own controls here. */ + int (*init)(struct radio_isa_card *isa); + /* Set mute and volume. */ + int (*s_mute_volume)(struct radio_isa_card *isa, bool mute, int volume); + /* Set frequency */ + int (*s_frequency)(struct radio_isa_card *isa, u32 freq); + /* Set stereo/mono audio mode */ + int (*s_stereo)(struct radio_isa_card *isa, bool stereo); + /* Get rxsubchans value for VIDIOC_G_TUNER */ + u32 (*g_rxsubchans)(struct radio_isa_card *isa); + /* Get the signal strength for VIDIOC_G_TUNER */ + u32 (*g_signal)(struct radio_isa_card *isa); +}; + +/* Top level structure needed to instantiate the cards */ +struct radio_isa_driver { + struct isa_driver driver; + const struct radio_isa_ops *ops; + /* The module_param_array with the specified I/O ports */ + int *io_params; + /* The module_param_array with the radio_nr values */ + int *radio_nr_params; + /* Whether we should probe for possible cards */ + bool probe; + /* The list of possible I/O ports */ + const int *io_ports; + /* The size of that list */ + int num_of_io_ports; + /* The region size to request */ + unsigned region_size; + /* The name of the card */ + const char *card; + /* Card can capture stereo audio */ + bool has_stereo; + /* The maximum volume for the volume control. If 0, then there + is no volume control possible. */ + int max_volume; +}; + +int radio_isa_match(struct device *pdev, unsigned int dev); +int radio_isa_probe(struct device *pdev, unsigned int dev); +int radio_isa_remove(struct device *pdev, unsigned int dev); + +#endif diff --git a/drivers/media/radio/radio-keene.c b/drivers/media/radio/radio-keene.c new file mode 100644 index 000000000000..55bd1d2937c8 --- /dev/null +++ b/drivers/media/radio/radio-keene.c @@ -0,0 +1,427 @@ +/* + * Copyright (c) 2012 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* kernel includes */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <linux/usb.h> +#include <linux/version.h> +#include <linux/mutex.h> + +/* driver and module definitions */ +MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>"); +MODULE_DESCRIPTION("Keene FM Transmitter driver"); +MODULE_LICENSE("GPL"); + +/* Actually, it advertises itself as a Logitech */ +#define USB_KEENE_VENDOR 0x046d +#define USB_KEENE_PRODUCT 0x0a0e + +/* Probably USB_TIMEOUT should be modified in module parameter */ +#define BUFFER_LENGTH 8 +#define USB_TIMEOUT 500 + +/* Frequency limits in MHz */ +#define FREQ_MIN 76U +#define FREQ_MAX 108U +#define FREQ_MUL 16000U + +/* USB Device ID List */ +static struct usb_device_id usb_keene_device_table[] = { + {USB_DEVICE_AND_INTERFACE_INFO(USB_KEENE_VENDOR, USB_KEENE_PRODUCT, + USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_keene_device_table); + +struct keene_device { + struct usb_device *usbdev; + struct usb_interface *intf; + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + struct mutex lock; + + u8 *buffer; + unsigned curfreq; + u8 tx; + u8 pa; + bool stereo; + bool muted; + bool preemph_75_us; +}; + +static inline struct keene_device *to_keene_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct keene_device, v4l2_dev); +} + +/* Set frequency (if non-0), PA, mute and turn on/off the FM transmitter. */ +static int keene_cmd_main(struct keene_device *radio, unsigned freq, bool play) +{ + unsigned short freq_send = freq ? (freq - 76 * 16000) / 800 : 0; + int ret; + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x50; + radio->buffer[2] = (freq_send >> 8) & 0xff; + radio->buffer[3] = freq_send & 0xff; + radio->buffer[4] = radio->pa; + /* If bit 4 is set, then tune to the frequency. + If bit 3 is set, then unmute; if bit 2 is set, then mute. + If bit 1 is set, then enter idle mode; if bit 0 is set, + then enter transit mode. + */ + radio->buffer[5] = (radio->muted ? 4 : 8) | (play ? 1 : 2) | + (freq ? 0x10 : 0); + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x200, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + + if (ret < 0) { + dev_warn(&radio->vdev.dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + if (freq) + radio->curfreq = freq; + return 0; +} + +/* Set TX, stereo and preemphasis mode (50 us vs 75 us). */ +static int keene_cmd_set(struct keene_device *radio) +{ + int ret; + + radio->buffer[0] = 0x00; + radio->buffer[1] = 0x51; + radio->buffer[2] = radio->tx; + /* If bit 0 is set, then transmit mono, otherwise stereo. + If bit 2 is set, then enable 75 us preemphasis, otherwise + it is 50 us. */ + radio->buffer[3] = (!radio->stereo) | (radio->preemph_75_us ? 4 : 0); + radio->buffer[4] = 0x00; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x200, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + + if (ret < 0) { + dev_warn(&radio->vdev.dev, "%s failed (%d)\n", __func__, ret); + return ret; + } + return 0; +} + +/* Handle unplugging the device. + * We call video_unregister_device in any case. + * The last function called in this procedure is + * usb_keene_device_release. + */ +static void usb_keene_disconnect(struct usb_interface *intf) +{ + struct keene_device *radio = to_keene_dev(usb_get_intfdata(intf)); + + v4l2_device_get(&radio->v4l2_dev); + mutex_lock(&radio->lock); + usb_set_intfdata(intf, NULL); + video_unregister_device(&radio->vdev); + v4l2_device_disconnect(&radio->v4l2_dev); + mutex_unlock(&radio->lock); + v4l2_device_put(&radio->v4l2_dev); +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct keene_device *radio = video_drvdata(file); + + strlcpy(v->driver, "radio-keene", sizeof(v->driver)); + strlcpy(v->card, "Keene FM Transmitter", sizeof(v->card)); + usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); + v->device_caps = V4L2_CAP_RADIO | V4L2_CAP_MODULATOR; + v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +static int vidioc_g_modulator(struct file *file, void *priv, + struct v4l2_modulator *v) +{ + struct keene_device *radio = video_drvdata(file); + + if (v->index > 0) + return -EINVAL; + + strlcpy(v->name, "FM", sizeof(v->name)); + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->txsubchans = radio->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; + v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + return 0; +} + +static int vidioc_s_modulator(struct file *file, void *priv, + struct v4l2_modulator *v) +{ + struct keene_device *radio = video_drvdata(file); + + if (v->index > 0) + return -EINVAL; + + radio->stereo = (v->txsubchans == V4L2_TUNER_SUB_STEREO); + return keene_cmd_set(radio); +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct keene_device *radio = video_drvdata(file); + + if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) + return -EINVAL; + f->frequency = clamp(f->frequency, + FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL); + return keene_cmd_main(radio, f->frequency, true); +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct keene_device *radio = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + f->type = V4L2_TUNER_RADIO; + f->frequency = radio->curfreq; + return 0; +} + +static int keene_s_ctrl(struct v4l2_ctrl *ctrl) +{ + static const u8 db2tx[] = { + /* -15, -12, -9, -6, -3, 0 dB */ + 0x03, 0x13, 0x02, 0x12, 0x22, 0x32, + /* 3, 6, 9, 12, 15, 18 dB */ + 0x21, 0x31, 0x20, 0x30, 0x40, 0x50 + }; + struct keene_device *radio = + container_of(ctrl->handler, struct keene_device, hdl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + radio->muted = ctrl->val; + return keene_cmd_main(radio, 0, true); + + case V4L2_CID_TUNE_POWER_LEVEL: + /* To go from dBuV to the register value we apply the + following formula: */ + radio->pa = (ctrl->val - 71) * 100 / 62; + return keene_cmd_main(radio, 0, true); + + case V4L2_CID_TUNE_PREEMPHASIS: + radio->preemph_75_us = ctrl->val == V4L2_PREEMPHASIS_75_uS; + return keene_cmd_set(radio); + + case V4L2_CID_AUDIO_COMPRESSION_GAIN: + radio->tx = db2tx[(ctrl->val - ctrl->minimum) / ctrl->step]; + return keene_cmd_set(radio); + } + return -EINVAL; +} + +static int vidioc_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_CTRL: + return v4l2_event_subscribe(fh, sub, 0); + default: + return -EINVAL; + } +} + + +/* File system interface */ +static const struct v4l2_file_operations usb_keene_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ctrl_ops keene_ctrl_ops = { + .s_ctrl = keene_s_ctrl, +}; + +static const struct v4l2_ioctl_ops usb_keene_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_modulator = vidioc_g_modulator, + .vidioc_s_modulator = vidioc_s_modulator, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = vidioc_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static void usb_keene_video_device_release(struct v4l2_device *v4l2_dev) +{ + struct keene_device *radio = to_keene_dev(v4l2_dev); + + /* free rest memory */ + v4l2_ctrl_handler_free(&radio->hdl); + kfree(radio->buffer); + kfree(radio); +} + +/* check if the device is present and register with v4l and usb if it is */ +static int usb_keene_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct keene_device *radio; + struct v4l2_ctrl_handler *hdl; + int retval = 0; + + /* + * The Keene FM transmitter USB device has the same USB ID as + * the Logitech AudioHub Speaker, but it should ignore the hid. + * Check if the name is that of the Keene device. + * If not, then someone connected the AudioHub and we shouldn't + * attempt to handle this driver. + * For reference: the product name of the AudioHub is + * "AudioHub Speaker". + */ + if (dev->product && strcmp(dev->product, "B-LINK USB Audio ")) + return -ENODEV; + + radio = kzalloc(sizeof(struct keene_device), GFP_KERNEL); + if (radio) + radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL); + + if (!radio || !radio->buffer) { + dev_err(&intf->dev, "kmalloc for keene_device failed\n"); + kfree(radio); + retval = -ENOMEM; + goto err; + } + + hdl = &radio->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_AUDIO_MUTE, + 0, 1, 1, 0); + v4l2_ctrl_new_std_menu(hdl, &keene_ctrl_ops, V4L2_CID_TUNE_PREEMPHASIS, + V4L2_PREEMPHASIS_75_uS, 1, V4L2_PREEMPHASIS_50_uS); + v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_TUNE_POWER_LEVEL, + 84, 118, 1, 118); + v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_AUDIO_COMPRESSION_GAIN, + -15, 18, 3, 0); + radio->pa = 118; + radio->tx = 0x32; + radio->stereo = true; + radio->curfreq = 95.16 * FREQ_MUL; + if (hdl->error) { + retval = hdl->error; + + v4l2_ctrl_handler_free(hdl); + goto err_v4l2; + } + retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev); + if (retval < 0) { + dev_err(&intf->dev, "couldn't register v4l2_device\n"); + goto err_v4l2; + } + + mutex_init(&radio->lock); + + radio->v4l2_dev.ctrl_handler = hdl; + radio->v4l2_dev.release = usb_keene_video_device_release; + strlcpy(radio->vdev.name, radio->v4l2_dev.name, + sizeof(radio->vdev.name)); + radio->vdev.v4l2_dev = &radio->v4l2_dev; + radio->vdev.fops = &usb_keene_fops; + radio->vdev.ioctl_ops = &usb_keene_ioctl_ops; + radio->vdev.lock = &radio->lock; + radio->vdev.release = video_device_release_empty; + + radio->usbdev = interface_to_usbdev(intf); + radio->intf = intf; + usb_set_intfdata(intf, &radio->v4l2_dev); + + video_set_drvdata(&radio->vdev, radio); + set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags); + + retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1); + if (retval < 0) { + dev_err(&intf->dev, "could not register video device\n"); + goto err_vdev; + } + v4l2_ctrl_handler_setup(hdl); + dev_info(&intf->dev, "V4L2 device registered as %s\n", + video_device_node_name(&radio->vdev)); + return 0; + +err_vdev: + v4l2_device_unregister(&radio->v4l2_dev); +err_v4l2: + kfree(radio->buffer); + kfree(radio); +err: + return retval; +} + +/* USB subsystem interface */ +static struct usb_driver usb_keene_driver = { + .name = "radio-keene", + .probe = usb_keene_probe, + .disconnect = usb_keene_disconnect, + .id_table = usb_keene_device_table, +}; + +static int __init keene_init(void) +{ + int retval = usb_register(&usb_keene_driver); + + if (retval) + pr_err(KBUILD_MODNAME + ": usb_register failed. Error number %d\n", retval); + + return retval; +} + +static void __exit keene_exit(void) +{ + usb_deregister(&usb_keene_driver); +} + +module_init(keene_init); +module_exit(keene_exit); + diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index f872a54cf3d9..740a3d5520c7 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -42,67 +42,37 @@ #include <linux/videodev2.h> #include <linux/io.h> #include <linux/slab.h> +#include <sound/tea575x-tuner.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> - -#define DRIVER_VERSION "0.7.8" - +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net"); -MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000 radio."); +MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000."); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); +MODULE_VERSION("1.0.0"); static int radio_nr = -1; -module_param(radio_nr, int, 0); - -static int debug; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "activates debug info"); - -#define dprintk(dev, num, fmt, arg...) \ - v4l2_dbg(num, debug, &dev->v4l2_dev, fmt, ## arg) - -#ifndef PCI_VENDOR_ID_GUILLEMOT -#define PCI_VENDOR_ID_GUILLEMOT 0x5046 -#endif - -#ifndef PCI_DEVICE_ID_GUILLEMOT -#define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001 -#endif - +module_param(radio_nr, int, 0644); +MODULE_PARM_DESC(radio_nr, "Radio device number"); /* TEA5757 pin mappings */ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16; -#define FREQ_LO (87 * 16000) -#define FREQ_HI (108 * 16000) - -#define FREQ_IF 171200 /* 10.7*16000 */ -#define FREQ_STEP 200 /* 12.5*16 */ - -/* (x==fmhz*16*1000) -> bits */ -#define FREQ2BITS(x) \ - ((((unsigned int)(x) + FREQ_IF + (FREQ_STEP << 1)) / (FREQ_STEP << 2)) << 2) - -#define BITS2FREQ(x) ((x) * FREQ_STEP - FREQ_IF) +static atomic_t maxiradio_instance = ATOMIC_INIT(0); +#define PCI_VENDOR_ID_GUILLEMOT 0x5046 +#define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001 struct maxiradio { + struct snd_tea575x tea; struct v4l2_device v4l2_dev; - struct video_device vdev; struct pci_dev *pdev; u16 io; /* base of radio io */ - u16 muted; /* VIDEO_AUDIO_MUTE */ - u16 stereo; /* VIDEO_TUNER_STEREO_ON */ - u16 tuned; /* signal strength (0 or 0xffff) */ - - unsigned long freq; - - struct mutex lock; }; static inline struct maxiradio *to_maxiradio(struct v4l2_device *v4l2_dev) @@ -110,259 +80,41 @@ static inline struct maxiradio *to_maxiradio(struct v4l2_device *v4l2_dev) return container_of(v4l2_dev, struct maxiradio, v4l2_dev); } -static void outbit(unsigned long bit, u16 io) -{ - int val = power | wren | (bit ? data : 0); - - outb(val, io); - udelay(4); - outb(val | clk, io); - udelay(4); - outb(val, io); - udelay(4); -} - -static void turn_power(struct maxiradio *dev, int p) -{ - if (p != 0) { - dprintk(dev, 1, "Radio powered on\n"); - outb(power, dev->io); - } else { - dprintk(dev, 1, "Radio powered off\n"); - outb(0, dev->io); - } -} - -static void set_freq(struct maxiradio *dev, u32 freq) -{ - unsigned long int si; - int bl; - int io = dev->io; - int val = FREQ2BITS(freq); - - /* TEA5757 shift register bits (see pdf) */ - - outbit(0, io); /* 24 search */ - outbit(1, io); /* 23 search up/down */ - - outbit(0, io); /* 22 stereo/mono */ - - outbit(0, io); /* 21 band */ - outbit(0, io); /* 20 band (only 00=FM works I think) */ - - outbit(0, io); /* 19 port ? */ - outbit(0, io); /* 18 port ? */ - - outbit(0, io); /* 17 search level */ - outbit(0, io); /* 16 search level */ - - si = 0x8000; - for (bl = 1; bl <= 16; bl++) { - outbit(val & si, io); - si >>= 1; - } - - dprintk(dev, 1, "Radio freq set to %d.%02d MHz\n", - freq / 16000, - freq % 16000 * 100 / 16000); - - turn_power(dev, 1); -} - -static int get_stereo(u16 io) +static void maxiradio_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) { - outb(power,io); - udelay(4); + struct maxiradio *dev = tea->private_data; + u8 bits = 0; - return !(inb(io) & mo_st); -} + bits |= (pins & TEA575X_DATA) ? data : 0; + bits |= (pins & TEA575X_CLK) ? clk : 0; + bits |= (pins & TEA575X_WREN) ? wren : 0; + bits |= power; -static int get_tune(u16 io) -{ - outb(power+clk,io); - udelay(4); - - return !(inb(io) & mo_st); -} - - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - struct maxiradio *dev = video_drvdata(file); - - strlcpy(v->driver, "radio-maxiradio", sizeof(v->driver)); - strlcpy(v->card, "Maxi Radio FM2000 radio", sizeof(v->card)); - snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(dev->pdev)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; + outb(bits, dev->io); } -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) +/* Note: this card cannot read out the data of the shift registers, + only the mono/stereo pin works. */ +static u8 maxiradio_tea575x_get_pins(struct snd_tea575x *tea) { - struct maxiradio *dev = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - mutex_lock(&dev->lock); - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = FREQ_LO; - v->rangehigh = FREQ_HI; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (get_stereo(dev->io)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xffff * get_tune(dev->io); - mutex_unlock(&dev->lock); + struct maxiradio *dev = tea->private_data; + u8 bits = inb(dev->io); - return 0; + return ((bits & data) ? TEA575X_DATA : 0) | + ((bits & mo_st) ? TEA575X_MOST : 0); } -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) +static void maxiradio_tea575x_set_direction(struct snd_tea575x *tea, bool output) { - return v->index ? -EINVAL : 0; } -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct maxiradio *dev = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (f->frequency < FREQ_LO || f->frequency > FREQ_HI) { - dprintk(dev, 1, "radio freq (%d.%02d MHz) out of range (%d-%d)\n", - f->frequency / 16000, - f->frequency % 16000 * 100 / 16000, - FREQ_LO / 16000, FREQ_HI / 16000); - - return -EINVAL; - } - - mutex_lock(&dev->lock); - dev->freq = f->frequency; - set_freq(dev, dev->freq); - msleep(125); - mutex_unlock(&dev->lock); - - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct maxiradio *dev = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = dev->freq; - - dprintk(dev, 4, "radio freq is %d.%02d MHz", - f->frequency / 16000, - f->frequency % 16000 * 100 / 16000); - - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct maxiradio *dev = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = dev->muted; - return 0; - } - - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct maxiradio *dev = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - mutex_lock(&dev->lock); - dev->muted = ctrl->value; - if (dev->muted) - turn_power(dev, 0); - else - set_freq(dev, dev->freq); - mutex_unlock(&dev->lock); - return 0; - } - - return -EINVAL; -} - -static const struct v4l2_file_operations maxiradio_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static struct snd_tea575x_ops maxiradio_tea_ops = { + .set_pins = maxiradio_tea575x_set_pins, + .get_pins = maxiradio_tea575x_get_pins, + .set_direction = maxiradio_tea575x_set_direction, }; -static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, -}; - -static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit maxiradio_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct maxiradio *dev; struct v4l2_device *v4l2_dev; @@ -375,63 +127,60 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d } v4l2_dev = &dev->v4l2_dev; - mutex_init(&dev->lock); - dev->pdev = pdev; - dev->muted = 1; - dev->freq = FREQ_LO; - - strlcpy(v4l2_dev->name, "maxiradio", sizeof(v4l2_dev->name)); + v4l2_device_set_name(v4l2_dev, "maxiradio", &maxiradio_instance); retval = v4l2_device_register(&pdev->dev, v4l2_dev); if (retval < 0) { v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); goto errfr; } + dev->tea.private_data = dev; + dev->tea.ops = &maxiradio_tea_ops; + /* The data pin cannot be read. This may be a hardware limitation, or + we just don't know how to read it. */ + dev->tea.cannot_read_data = true; + dev->tea.v4l2_dev = v4l2_dev; + dev->tea.radio_nr = radio_nr; + strlcpy(dev->tea.card, "Maxi Radio FM2000", sizeof(dev->tea.card)); + snprintf(dev->tea.bus_info, sizeof(dev->tea.bus_info), + "PCI:%s", pci_name(pdev)); + + retval = -ENODEV; if (!request_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0), "Maxi Radio FM 2000")) { - v4l2_err(v4l2_dev, "can't reserve I/O ports\n"); - goto err_out; + pci_resource_len(pdev, 0), v4l2_dev->name)) { + dev_err(&pdev->dev, "can't reserve I/O ports\n"); + goto err_hdl; } if (pci_enable_device(pdev)) goto err_out_free_region; dev->io = pci_resource_start(pdev, 0); - strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); - dev->vdev.v4l2_dev = v4l2_dev; - dev->vdev.fops = &maxiradio_fops; - dev->vdev.ioctl_ops = &maxiradio_ioctl_ops; - dev->vdev.release = video_device_release_empty; - video_set_drvdata(&dev->vdev, dev); - - if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_err(v4l2_dev, "can't register device!"); + if (snd_tea575x_init(&dev->tea)) { + printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n"); goto err_out_free_region; } - - v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n"); - - v4l2_info(v4l2_dev, "found Guillemot MAXI Radio device (io = 0x%x)\n", - dev->io); return 0; err_out_free_region: release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); -err_out: +err_hdl: v4l2_device_unregister(v4l2_dev); errfr: kfree(dev); - return -ENODEV; + return retval; } -static void __devexit maxiradio_remove_one(struct pci_dev *pdev) +static void __devexit maxiradio_remove(struct pci_dev *pdev) { struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); struct maxiradio *dev = to_maxiradio(v4l2_dev); - video_unregister_device(&dev->vdev); - v4l2_device_unregister(&dev->v4l2_dev); + snd_tea575x_exit(&dev->tea); + /* Turn off power */ + outb(0, dev->io); + v4l2_device_unregister(v4l2_dev); release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); } @@ -446,19 +195,19 @@ MODULE_DEVICE_TABLE(pci, maxiradio_pci_tbl); static struct pci_driver maxiradio_driver = { .name = "radio-maxiradio", .id_table = maxiradio_pci_tbl, - .probe = maxiradio_init_one, - .remove = __devexit_p(maxiradio_remove_one), + .probe = maxiradio_probe, + .remove = __devexit_p(maxiradio_remove), }; -static int __init maxiradio_radio_init(void) +static int __init maxiradio_init(void) { return pci_register_driver(&maxiradio_driver); } -static void __exit maxiradio_radio_exit(void) +static void __exit maxiradio_exit(void) { pci_unregister_driver(&maxiradio_driver); } -module_init(maxiradio_radio_init); -module_exit(maxiradio_radio_exit); +module_init(maxiradio_init); +module_exit(maxiradio_exit); diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 3628be617ee9..b275c5d0fe9a 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -1,11 +1,12 @@ -/* RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff +/* + * RadioTrack II driver + * Copyright 1998 Ben Pfaff * * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> * - * TODO: Allow for more than one of these foolish entities :-) - * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ @@ -18,323 +19,120 @@ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" MODULE_AUTHOR("Ben Pfaff"); MODULE_DESCRIPTION("A driver for the RadioTrack II radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("0.1.99"); #ifndef CONFIG_RADIO_RTRACK2_PORT #define CONFIG_RADIO_RTRACK2_PORT -1 #endif -static int io = CONFIG_RADIO_RTRACK2_PORT; -static int radio_nr = -1; - -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20c or 0x30c)"); -module_param(radio_nr, int, 0); - -struct rtrack2 -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; - unsigned long curfreq; - int muted; - struct mutex lock; -}; +#define RTRACK2_MAX 2 -static struct rtrack2 rtrack2_card; +static int io[RTRACK2_MAX] = { [0] = CONFIG_RADIO_RTRACK2_PORT, + [1 ... (RTRACK2_MAX - 1)] = -1 }; +static int radio_nr[RTRACK2_MAX] = { [0 ... (RTRACK2_MAX - 1)] = -1 }; +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); -/* local things */ - -static void rt_mute(struct rtrack2 *dev) -{ - if (dev->muted) - return; - mutex_lock(&dev->lock); - outb(1, dev->io); - mutex_unlock(&dev->lock); - dev->muted = 1; -} - -static void rt_unmute(struct rtrack2 *dev) +static struct radio_isa_card *rtrack2_alloc(void) { - if(dev->muted == 0) - return; - mutex_lock(&dev->lock); - outb(0, dev->io); - mutex_unlock(&dev->lock); - dev->muted = 0; + return kzalloc(sizeof(struct radio_isa_card), GFP_KERNEL); } -static void zero(struct rtrack2 *dev) +static void zero(struct radio_isa_card *isa) { - outb_p(1, dev->io); - outb_p(3, dev->io); - outb_p(1, dev->io); + outb_p(1, isa->io); + outb_p(3, isa->io); + outb_p(1, isa->io); } -static void one(struct rtrack2 *dev) +static void one(struct radio_isa_card *isa) { - outb_p(5, dev->io); - outb_p(7, dev->io); - outb_p(5, dev->io); + outb_p(5, isa->io); + outb_p(7, isa->io); + outb_p(5, isa->io); } -static int rt_setfreq(struct rtrack2 *dev, unsigned long freq) +static int rtrack2_s_frequency(struct radio_isa_card *isa, u32 freq) { int i; - mutex_lock(&dev->lock); - dev->curfreq = freq; freq = freq / 200 + 856; - outb_p(0xc8, dev->io); - outb_p(0xc9, dev->io); - outb_p(0xc9, dev->io); + outb_p(0xc8, isa->io); + outb_p(0xc9, isa->io); + outb_p(0xc9, isa->io); for (i = 0; i < 10; i++) - zero(dev); + zero(isa); for (i = 14; i >= 0; i--) if (freq & (1 << i)) - one(dev); + one(isa); else - zero(dev); - - outb_p(0xc8, dev->io); - if (!dev->muted) - outb_p(0, dev->io); - - mutex_unlock(&dev->lock); - return 0; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-rtrack2", sizeof(v->driver)); - strlcpy(v->card, "RadioTrack II", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} + zero(isa); -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int rt_getsigstr(struct rtrack2 *dev) -{ - int sig = 1; - - mutex_lock(&dev->lock); - if (inb(dev->io) & 2) /* bit set = no signal present */ - sig = 0; - mutex_unlock(&dev->lock); - return sig; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct rtrack2 *rt = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 88 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * rt_getsigstr(rt); + outb_p(0xc8, isa->io); + if (!v4l2_ctrl_g_ctrl(isa->mute)) + outb_p(0, isa->io); return 0; } -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static u32 rtrack2_g_signal(struct radio_isa_card *isa) { - struct rtrack2 *rt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - rt_setfreq(rt, f->frequency); - return 0; + /* bit set = no signal present */ + return (inb(isa->io) & 2) ? 0 : 0xffff; } -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) +static int rtrack2_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - struct rtrack2 *rt = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = rt->curfreq; + outb(mute, isa->io); return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535, 65535); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct rtrack2 *rt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = rt->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (rt->muted) - ctrl->value = 0; - else - ctrl->value = 65535; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct rtrack2 *rt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - rt_mute(rt); - else - rt_unmute(rt); - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (ctrl->value) - rt_unmute(rt); - else - rt_mute(rt); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static const struct v4l2_file_operations rtrack2_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops rtrack2_ops = { + .alloc = rtrack2_alloc, + .s_mute_volume = rtrack2_s_mute_volume, + .s_frequency = rtrack2_s_frequency, + .g_signal = rtrack2_g_signal, }; -static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, +static const int rtrack2_ioports[] = { 0x20f, 0x30f }; + +static struct radio_isa_driver rtrack2_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-rtrack2", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = rtrack2_ioports, + .num_of_io_ports = ARRAY_SIZE(rtrack2_ioports), + .region_size = 4, + .card = "AIMSlab RadioTrack II", + .ops = &rtrack2_ops, + .has_stereo = true, }; static int __init rtrack2_init(void) { - struct rtrack2 *dev = &rtrack2_card; - struct v4l2_device *v4l2_dev = &dev->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "rtrack2", sizeof(v4l2_dev->name)); - dev->io = io; - if (dev->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x20c or io=0x30c\n"); - return -EINVAL; - } - if (!request_region(dev->io, 4, "rtrack2")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", dev->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(dev->io, 4); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); - dev->vdev.v4l2_dev = v4l2_dev; - dev->vdev.fops = &rtrack2_fops; - dev->vdev.ioctl_ops = &rtrack2_ioctl_ops; - dev->vdev.release = video_device_release_empty; - video_set_drvdata(&dev->vdev, dev); - - /* mute card - prevents noisy bootups */ - outb(1, dev->io); - dev->muted = 1; - - mutex_init(&dev->lock); - if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(dev->io, 4); - return -EINVAL; - } - - v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n"); - - return 0; + return isa_register_driver(&rtrack2_driver.driver, RTRACK2_MAX); } static void __exit rtrack2_exit(void) { - struct rtrack2 *dev = &rtrack2_card; - - video_unregister_device(&dev->vdev); - v4l2_device_unregister(&dev->v4l2_dev); - release_region(dev->io, 4); + isa_unregister_driver(&rtrack2_driver.driver); } module_init(rtrack2_init); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 7ab9afadf29b..7c69214334bf 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -9,16 +9,23 @@ #include <linux/delay.h> #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ +#include <linux/slab.h> #include <linux/ioport.h> /* request_region */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/isa.h> #include <sound/tea575x-tuner.h> MODULE_AUTHOR("Ondrej Zary"); MODULE_DESCRIPTION("MediaForte SF16-FMR2 FM radio card driver"); MODULE_LICENSE("GPL"); +static int radio_nr = -1; +module_param(radio_nr, int, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device number"); + struct fmr2 { int io; + struct v4l2_device v4l2_dev; struct snd_tea575x tea; struct v4l2_ctrl *volume; struct v4l2_ctrl *balance; @@ -26,7 +33,6 @@ struct fmr2 { /* the port is hardwired so no need to support multiple cards */ #define FMR2_PORT 0x384 -static struct fmr2 fmr2_card; /* TEA575x tuner pins */ #define STR_DATA (1 << 0) @@ -180,26 +186,46 @@ static int fmr2_tea_ext_init(struct snd_tea575x *tea) return 0; } -static int __init fmr2_init(void) +static int __devinit fmr2_probe(struct device *pdev, unsigned int dev) { - struct fmr2 *fmr2 = &fmr2_card; + struct fmr2 *fmr2; + int err; + + fmr2 = kzalloc(sizeof(*fmr2), GFP_KERNEL); + if (fmr2 == NULL) + return -ENOMEM; + strlcpy(fmr2->v4l2_dev.name, dev_name(pdev), + sizeof(fmr2->v4l2_dev.name)); fmr2->io = FMR2_PORT; - if (!request_region(fmr2->io, 2, "SF16-FMR2")) { + if (!request_region(fmr2->io, 2, fmr2->v4l2_dev.name)) { printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io); + kfree(fmr2); return -EBUSY; } + dev_set_drvdata(pdev, fmr2); + err = v4l2_device_register(pdev, &fmr2->v4l2_dev); + if (err < 0) { + v4l2_err(&fmr2->v4l2_dev, "Could not register v4l2_device\n"); + release_region(fmr2->io, 2); + kfree(fmr2); + return err; + } + fmr2->tea.v4l2_dev = &fmr2->v4l2_dev; fmr2->tea.private_data = fmr2; + fmr2->tea.radio_nr = radio_nr; fmr2->tea.ops = &fmr2_tea_ops; fmr2->tea.ext_init = fmr2_tea_ext_init; strlcpy(fmr2->tea.card, "SF16-FMR2", sizeof(fmr2->tea.card)); - strcpy(fmr2->tea.bus_info, "ISA"); + snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "ISA:%s", + fmr2->v4l2_dev.name); if (snd_tea575x_init(&fmr2->tea)) { printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n"); release_region(fmr2->io, 2); + kfree(fmr2); return -ENODEV; } @@ -207,12 +233,33 @@ static int __init fmr2_init(void) return 0; } -static void __exit fmr2_exit(void) +static int __exit fmr2_remove(struct device *pdev, unsigned int dev) { - struct fmr2 *fmr2 = &fmr2_card; + struct fmr2 *fmr2 = dev_get_drvdata(pdev); snd_tea575x_exit(&fmr2->tea); release_region(fmr2->io, 2); + v4l2_device_unregister(&fmr2->v4l2_dev); + kfree(fmr2); + return 0; +} + +struct isa_driver fmr2_driver = { + .probe = fmr2_probe, + .remove = fmr2_remove, + .driver = { + .name = "radio-sf16fmr2", + }, +}; + +static int __init fmr2_init(void) +{ + return isa_register_driver(&fmr2_driver, 1); +} + +static void __exit fmr2_exit(void) +{ + isa_unregister_driver(&fmr2_driver); } module_init(fmr2_init); diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index db20904d01f0..6b1fae32b483 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -575,21 +575,7 @@ static struct i2c_driver tea5764_i2c_driver = { .id_table = tea5764_id, }; -/* init the driver */ -static int __init tea5764_init(void) -{ - int ret = i2c_add_driver(&tea5764_i2c_driver); - - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ": " - DRIVER_DESC "\n"); - return ret; -} - -/* cleanup the driver */ -static void __exit tea5764_exit(void) -{ - i2c_del_driver(&tea5764_i2c_driver); -} +module_i2c_driver(tea5764_i2c_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -600,6 +586,3 @@ module_param(use_xtal, int, 0); MODULE_PARM_DESC(use_xtal, "Chip have a xtal connected in board"); module_param(radio_nr, int, 0); MODULE_PARM_DESC(radio_nr, "video4linux device number to use"); - -module_init(tea5764_init); -module_exit(tea5764_exit); diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index f2ed9cc3cf3b..be10a802e3a9 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -16,11 +16,7 @@ * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); * Volume Control is done digitally * - * there is a I2C controlled RDS decoder (SAA6588) onboard, which i would like to support someday - * (as soon i have understand how to get started :) - * If you can help me out with that, please contact me!! - * - * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ @@ -30,43 +26,24 @@ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" -MODULE_AUTHOR("R.OFFERMANNS & others"); +MODULE_AUTHOR("R. Offermans & others"); MODULE_DESCRIPTION("A driver for the TerraTec ActiveRadio Standalone radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); - -#ifndef CONFIG_RADIO_TERRATEC_PORT -#define CONFIG_RADIO_TERRATEC_PORT 0x590 -#endif +MODULE_VERSION("0.1.99"); -static int io = CONFIG_RADIO_TERRATEC_PORT; +/* Note: there seems to be only one possible port (0x590), but without + hardware this is hard to verify. For now, this is the only one we will + support. */ +static int io = 0x590; static int radio_nr = -1; -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the TerraTec ActiveRadio card (0x590 or 0x591)"); -module_param(radio_nr, int, 0); - -static struct v4l2_queryctrl radio_qctrl[] = { - { - .id = V4L2_CID_AUDIO_MUTE, - .name = "Mute", - .minimum = 0, - .maximum = 1, - .default_value = 1, - .type = V4L2_CTRL_TYPE_BOOLEAN, - },{ - .id = V4L2_CID_AUDIO_VOLUME, - .name = "Volume", - .minimum = 0, - .maximum = 0xff, - .step = 1, - .default_value = 0xff, - .type = V4L2_CTRL_TYPE_INTEGER, - } -}; +module_param(radio_nr, int, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device number"); #define WRT_DIS 0x00 #define CLK_OFF 0x00 @@ -76,63 +53,24 @@ static struct v4l2_queryctrl radio_qctrl[] = { #define CLK_ON 0x08 #define WRT_EN 0x10 -struct terratec +static struct radio_isa_card *terratec_alloc(void) { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; - int curvol; - unsigned long curfreq; - int muted; - struct mutex lock; -}; - -static struct terratec terratec_card; - -/* local things */ + return kzalloc(sizeof(struct radio_isa_card), GFP_KERNEL); +} -static void tt_write_vol(struct terratec *tt, int volume) +static int terratec_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { int i; - volume = volume + (volume * 32); /* change both channels */ - mutex_lock(&tt->lock); + if (mute) + vol = 0; + vol = vol + (vol * 32); /* change both channels */ for (i = 0; i < 8; i++) { - if (volume & (0x80 >> i)) - outb(0x80, tt->io + 1); + if (vol & (0x80 >> i)) + outb(0x80, isa->io + 1); else - outb(0x00, tt->io + 1); - } - mutex_unlock(&tt->lock); -} - - - -static void tt_mute(struct terratec *tt) -{ - tt->muted = 1; - tt_write_vol(tt, 0); -} - -static int tt_setvol(struct terratec *tt, int vol) -{ - if (vol == tt->curvol) { /* requested volume = current */ - if (tt->muted) { /* user is unmuting the card */ - tt->muted = 0; - tt_write_vol(tt, vol); /* enable card */ - } - return 0; - } - - if (vol == 0) { /* volume = 0 means mute the card */ - tt_write_vol(tt, 0); /* "turn off card" by setting vol to 0 */ - tt->curvol = vol; /* track the volume state! */ - return 0; + outb(0x00, isa->io + 1); } - - tt->muted = 0; - tt_write_vol(tt, vol); - tt->curvol = vol; return 0; } @@ -140,20 +78,15 @@ static int tt_setvol(struct terratec *tt, int vol) /* this is the worst part in this driver */ /* many more or less strange things are going on here, but hey, it works :) */ -static int tt_setfreq(struct terratec *tt, unsigned long freq1) +static int terratec_s_frequency(struct radio_isa_card *isa, u32 freq) { - int freq; int i; int p; - int temp; + int temp; long rest; unsigned char buffer[25]; /* we have to bit shift 25 registers */ - mutex_lock(&tt->lock); - - tt->curfreq = freq1; - - freq = freq1 / 160; /* convert the freq. to a nice to handle value */ + freq = freq / 160; /* convert the freq. to a nice to handle value */ memset(buffer, 0, sizeof(buffer)); rest = freq * 10 + 10700; /* I once had understood what is going on here */ @@ -175,239 +108,61 @@ static int tt_setfreq(struct terratec *tt, unsigned long freq1) for (i = 24; i > -1; i--) { /* bit shift the values to the radiocard */ if (buffer[i] == 1) { - outb(WRT_EN | DATA, tt->io); - outb(WRT_EN | DATA | CLK_ON, tt->io); - outb(WRT_EN | DATA, tt->io); + outb(WRT_EN | DATA, isa->io); + outb(WRT_EN | DATA | CLK_ON, isa->io); + outb(WRT_EN | DATA, isa->io); } else { - outb(WRT_EN | 0x00, tt->io); - outb(WRT_EN | 0x00 | CLK_ON, tt->io); - } - } - outb(0x00, tt->io); - - mutex_unlock(&tt->lock); - - return 0; -} - -static int tt_getsigstr(struct terratec *tt) -{ - if (inb(tt->io) & 2) /* bit set = no signal present */ - return 0; - return 1; /* signal present */ -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-terratec", sizeof(v->driver)); - strlcpy(v->card, "ActiveRadio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct terratec *tt = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * tt_getsigstr(tt); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct terratec *tt = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - tt_setfreq(tt, f->frequency); - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct terratec *tt = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = tt->curfreq; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { - if (qc->id && qc->id == radio_qctrl[i].id) { - memcpy(qc, &(radio_qctrl[i]), sizeof(*qc)); - return 0; + outb(WRT_EN | 0x00, isa->io); + outb(WRT_EN | 0x00 | CLK_ON, isa->io); } } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct terratec *tt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (tt->muted) - ctrl->value = 1; - else - ctrl->value = 0; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = tt->curvol * 6554; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct terratec *tt = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - tt_mute(tt); - else - tt_setvol(tt,tt->curvol); - return 0; - case V4L2_CID_AUDIO_VOLUME: - tt_setvol(tt,ctrl->value); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; + outb(0x00, isa->io); return 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +static u32 terratec_g_signal(struct radio_isa_card *isa) { - return a->index ? -EINVAL : 0; + /* bit set = no signal present */ + return (inb(isa->io) & 2) ? 0 : 0xffff; } -static const struct v4l2_file_operations terratec_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops terratec_ops = { + .alloc = terratec_alloc, + .s_mute_volume = terratec_s_mute_volume, + .s_frequency = terratec_s_frequency, + .g_signal = terratec_g_signal, }; -static const struct v4l2_ioctl_ops terratec_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, +static const int terratec_ioports[] = { 0x590 }; + +static struct radio_isa_driver terratec_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-terratec", + }, + }, + .io_params = &io, + .radio_nr_params = &radio_nr, + .io_ports = terratec_ioports, + .num_of_io_ports = ARRAY_SIZE(terratec_ioports), + .region_size = 2, + .card = "TerraTec ActiveRadio", + .ops = &terratec_ops, + .has_stereo = true, + .max_volume = 10, }; static int __init terratec_init(void) { - struct terratec *tt = &terratec_card; - struct v4l2_device *v4l2_dev = &tt->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "terratec", sizeof(v4l2_dev->name)); - tt->io = io; - if (tt->io == -1) { - v4l2_err(v4l2_dev, "you must set an I/O address with io=0x590 or 0x591\n"); - return -EINVAL; - } - if (!request_region(tt->io, 2, "terratec")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(tt->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - strlcpy(tt->vdev.name, v4l2_dev->name, sizeof(tt->vdev.name)); - tt->vdev.v4l2_dev = v4l2_dev; - tt->vdev.fops = &terratec_fops; - tt->vdev.ioctl_ops = &terratec_ioctl_ops; - tt->vdev.release = video_device_release_empty; - video_set_drvdata(&tt->vdev, tt); - - mutex_init(&tt->lock); - - /* mute card - prevents noisy bootups */ - tt_write_vol(tt, 0); - - if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(&tt->v4l2_dev); - release_region(tt->io, 2); - return -EINVAL; - } - - v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n"); - return 0; + return isa_register_driver(&terratec_driver.driver, 1); } static void __exit terratec_exit(void) { - struct terratec *tt = &terratec_card; - struct v4l2_device *v4l2_dev = &tt->v4l2_dev; - - video_unregister_device(&tt->vdev); - v4l2_device_unregister(&tt->v4l2_dev); - release_region(tt->io, 2); - v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver unloaded.\n"); + isa_unregister_driver(&terratec_driver.driver); } module_init(terratec_init); diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index b3f45a019d82..26a8c6002121 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -21,13 +21,15 @@ #include <linux/ioport.h> #include <linux/videodev2.h> #include <linux/io.h> +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the Trust FM Radio card."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("0.1.99"); /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ @@ -35,39 +37,38 @@ MODULE_VERSION("0.0.3"); #define CONFIG_RADIO_TRUST_PORT -1 #endif -static int io = CONFIG_RADIO_TRUST_PORT; -static int radio_nr = -1; +#define TRUST_MAX 2 -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)"); -module_param(radio_nr, int, 0); +static int io[TRUST_MAX] = { [0] = CONFIG_RADIO_TRUST_PORT, + [1 ... (TRUST_MAX - 1)] = -1 }; +static int radio_nr[TRUST_MAX] = { [0 ... (TRUST_MAX - 1)] = -1 }; + +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Trust FM Radio card (0x350 or 0x358)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); struct trust { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; + struct radio_isa_card isa; int ioval; - __u16 curvol; - __u16 curbass; - __u16 curtreble; - int muted; - unsigned long curfreq; - int curstereo; - int curmute; - struct mutex lock; }; -static struct trust trust_card; +static struct radio_isa_card *trust_alloc(void) +{ + struct trust *tr = kzalloc(sizeof(*tr), GFP_KERNEL); + + return tr ? &tr->isa : NULL; +} /* i2c addresses */ #define TDA7318_ADDR 0x88 #define TSA6060T_ADDR 0xc4 -#define TR_DELAY do { inb(tr->io); inb(tr->io); inb(tr->io); } while (0) -#define TR_SET_SCL outb(tr->ioval |= 2, tr->io) -#define TR_CLR_SCL outb(tr->ioval &= 0xfd, tr->io) -#define TR_SET_SDA outb(tr->ioval |= 1, tr->io) -#define TR_CLR_SDA outb(tr->ioval &= 0xfe, tr->io) +#define TR_DELAY do { inb(tr->isa.io); inb(tr->isa.io); inb(tr->isa.io); } while (0) +#define TR_SET_SCL outb(tr->ioval |= 2, tr->isa.io) +#define TR_CLR_SCL outb(tr->ioval &= 0xfd, tr->isa.io) +#define TR_SET_SDA outb(tr->ioval |= 1, tr->isa.io) +#define TR_CLR_SDA outb(tr->ioval &= 0xfe, tr->isa.io) static void write_i2c(struct trust *tr, int n, ...) { @@ -84,10 +85,10 @@ static void write_i2c(struct trust *tr, int n, ...) TR_CLR_SCL; TR_DELAY; - for(; n; n--) { + for (; n; n--) { val = va_arg(args, unsigned); - for(mask = 0x80; mask; mask >>= 1) { - if(val & mask) + for (mask = 0x80; mask; mask >>= 1) { + if (val & mask) TR_SET_SDA; else TR_CLR_SDA; @@ -115,317 +116,128 @@ static void write_i2c(struct trust *tr, int n, ...) va_end(args); } -static void tr_setvol(struct trust *tr, __u16 vol) +static int trust_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - mutex_lock(&tr->lock); - tr->curvol = vol / 2048; - write_i2c(tr, 2, TDA7318_ADDR, tr->curvol ^ 0x1f); - mutex_unlock(&tr->lock); -} + struct trust *tr = container_of(isa, struct trust, isa); -static int basstreble2chip[15] = { - 0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8 -}; - -static void tr_setbass(struct trust *tr, __u16 bass) -{ - mutex_lock(&tr->lock); - tr->curbass = bass / 4370; - write_i2c(tr, 2, TDA7318_ADDR, 0x60 | basstreble2chip[tr->curbass]); - mutex_unlock(&tr->lock); -} - -static void tr_settreble(struct trust *tr, __u16 treble) -{ - mutex_lock(&tr->lock); - tr->curtreble = treble / 4370; - write_i2c(tr, 2, TDA7318_ADDR, 0x70 | basstreble2chip[tr->curtreble]); - mutex_unlock(&tr->lock); + tr->ioval = (tr->ioval & 0xf7) | (mute << 3); + outb(tr->ioval, isa->io); + write_i2c(tr, 2, TDA7318_ADDR, vol ^ 0x1f); + return 0; } -static void tr_setstereo(struct trust *tr, int stereo) +static int trust_s_stereo(struct radio_isa_card *isa, bool stereo) { - mutex_lock(&tr->lock); - tr->curstereo = !!stereo; - tr->ioval = (tr->ioval & 0xfb) | (!tr->curstereo << 2); - outb(tr->ioval, tr->io); - mutex_unlock(&tr->lock); -} + struct trust *tr = container_of(isa, struct trust, isa); -static void tr_setmute(struct trust *tr, int mute) -{ - mutex_lock(&tr->lock); - tr->curmute = !!mute; - tr->ioval = (tr->ioval & 0xf7) | (tr->curmute << 3); - outb(tr->ioval, tr->io); - mutex_unlock(&tr->lock); + tr->ioval = (tr->ioval & 0xfb) | (!stereo << 2); + outb(tr->ioval, isa->io); + return 0; } -static int tr_getsigstr(struct trust *tr) +static u32 trust_g_signal(struct radio_isa_card *isa) { int i, v; - mutex_lock(&tr->lock); for (i = 0, v = 0; i < 100; i++) - v |= inb(tr->io); - mutex_unlock(&tr->lock); + v |= inb(isa->io); return (v & 1) ? 0 : 0xffff; } -static int tr_getstereo(struct trust *tr) -{ - /* don't know how to determine it, just return the setting */ - return tr->curstereo; -} - -static void tr_setfreq(struct trust *tr, unsigned long f) +static int trust_s_frequency(struct radio_isa_card *isa, u32 freq) { - mutex_lock(&tr->lock); - tr->curfreq = f; - f /= 160; /* Convert to 10 kHz units */ - f += 1070; /* Add 10.7 MHz IF */ - write_i2c(tr, 5, TSA6060T_ADDR, (f << 1) | 1, f >> 7, 0x60 | ((f >> 15) & 1), 0); - mutex_unlock(&tr->lock); -} + struct trust *tr = container_of(isa, struct trust, isa); -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-trust", sizeof(v->driver)); - strlcpy(v->card, "Trust FM Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + freq /= 160; /* Convert to 10 kHz units */ + freq += 1070; /* Add 10.7 MHz IF */ + write_i2c(tr, 5, TSA6060T_ADDR, (freq << 1) | 1, + freq >> 7, 0x60 | ((freq >> 15) & 1), 0); return 0; } -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct trust *tr = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87.5 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (tr_getstereo(tr)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = tr_getsigstr(tr); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct trust *tr = video_drvdata(file); - - if (v->index) - return -EINVAL; - tr_setstereo(tr, v->audmode == V4L2_TUNER_MODE_STEREO); - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct trust *tr = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - tr_setfreq(tr, f->frequency); - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct trust *tr = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = tr->curfreq; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 2048, 65535); - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - return v4l2_ctrl_query_fill(qc, 0, 65535, 4370, 32768); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct trust *tr = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = tr->curmute; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = tr->curvol * 2048; - return 0; - case V4L2_CID_AUDIO_BASS: - ctrl->value = tr->curbass * 4370; - return 0; - case V4L2_CID_AUDIO_TREBLE: - ctrl->value = tr->curtreble * 4370; - return 0; - } - return -EINVAL; -} +static int basstreble2chip[15] = { + 0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8 +}; -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int trust_s_ctrl(struct v4l2_ctrl *ctrl) { - struct trust *tr = video_drvdata(file); + struct radio_isa_card *isa = + container_of(ctrl->handler, struct radio_isa_card, hdl); + struct trust *tr = container_of(isa, struct trust, isa); switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - tr_setmute(tr, ctrl->value); - return 0; - case V4L2_CID_AUDIO_VOLUME: - tr_setvol(tr, ctrl->value); - return 0; case V4L2_CID_AUDIO_BASS: - tr_setbass(tr, ctrl->value); + write_i2c(tr, 2, TDA7318_ADDR, 0x60 | basstreble2chip[ctrl->val]); return 0; case V4L2_CID_AUDIO_TREBLE: - tr_settreble(tr, ctrl->value); + write_i2c(tr, 2, TDA7318_ADDR, 0x70 | basstreble2chip[ctrl->val]); return 0; } return -EINVAL; } -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static const struct v4l2_file_operations trust_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops trust_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, +static const struct v4l2_ctrl_ops trust_ctrl_ops = { + .s_ctrl = trust_s_ctrl, }; -static int __init trust_init(void) +static int trust_initialize(struct radio_isa_card *isa) { - struct trust *tr = &trust_card; - struct v4l2_device *v4l2_dev = &tr->v4l2_dev; - int res; + struct trust *tr = container_of(isa, struct trust, isa); - strlcpy(v4l2_dev->name, "trust", sizeof(v4l2_dev->name)); - tr->io = io; tr->ioval = 0xf; - mutex_init(&tr->lock); - - if (tr->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x0x350 or 0x358\n"); - return -EINVAL; - } - if (!request_region(tr->io, 2, "Trust FM Radio")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", tr->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(tr->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - strlcpy(tr->vdev.name, v4l2_dev->name, sizeof(tr->vdev.name)); - tr->vdev.v4l2_dev = v4l2_dev; - tr->vdev.fops = &trust_fops; - tr->vdev.ioctl_ops = &trust_ioctl_ops; - tr->vdev.release = video_device_release_empty; - video_set_drvdata(&tr->vdev, tr); - write_i2c(tr, 2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0xe0); /* speaker att. RR = 0 dB */ write_i2c(tr, 2, TDA7318_ADDR, 0x40); /* stereo 1 input, gain = 18.75 dB */ - tr_setvol(tr, 0xffff); - tr_setbass(tr, 0x8000); - tr_settreble(tr, 0x8000); - tr_setstereo(tr, 1); - - /* mute card - prevents noisy bootups */ - tr_setmute(tr, 1); + v4l2_ctrl_new_std(&isa->hdl, &trust_ctrl_ops, + V4L2_CID_AUDIO_BASS, 0, 15, 1, 8); + v4l2_ctrl_new_std(&isa->hdl, &trust_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, 0, 15, 1, 8); + return isa->hdl.error; +} - if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(tr->io, 2); - return -EINVAL; - } +static const struct radio_isa_ops trust_ops = { + .init = trust_initialize, + .alloc = trust_alloc, + .s_mute_volume = trust_s_mute_volume, + .s_frequency = trust_s_frequency, + .s_stereo = trust_s_stereo, + .g_signal = trust_g_signal, +}; - v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n"); +static const int trust_ioports[] = { 0x350, 0x358 }; + +static struct radio_isa_driver trust_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-trust", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = trust_ioports, + .num_of_io_ports = ARRAY_SIZE(trust_ioports), + .region_size = 2, + .card = "Trust FM Radio", + .ops = &trust_ops, + .has_stereo = true, + .max_volume = 31, +}; - return 0; +static int __init trust_init(void) +{ + return isa_register_driver(&trust_driver.driver, TRUST_MAX); } -static void __exit cleanup_trust_module(void) +static void __exit trust_exit(void) { - struct trust *tr = &trust_card; - - video_unregister_device(&tr->vdev); - v4l2_device_unregister(&tr->v4l2_dev); - release_region(tr->io, 2); + isa_unregister_driver(&trust_driver.driver); } module_init(trust_init); -module_exit(cleanup_trust_module); +module_exit(trust_exit); diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 398726abc0c8..eb72a4d13758 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -33,63 +33,53 @@ #include <linux/ioport.h> /* request_region */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" #define DRIVER_VERSION "0.1.2" MODULE_AUTHOR("Dr. Henrik Seidel"); MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio)."); MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); +MODULE_VERSION("0.1.99"); #ifndef CONFIG_RADIO_TYPHOON_PORT #define CONFIG_RADIO_TYPHOON_PORT -1 #endif #ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ -#define CONFIG_RADIO_TYPHOON_MUTEFREQ 0 +#define CONFIG_RADIO_TYPHOON_MUTEFREQ 87000 #endif -static int io = CONFIG_RADIO_TYPHOON_PORT; -static int radio_nr = -1; - -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)"); - -module_param(radio_nr, int, 0); +#define TYPHOON_MAX 2 +static int io[TYPHOON_MAX] = { [0] = CONFIG_RADIO_TYPHOON_PORT, + [1 ... (TYPHOON_MAX - 1)] = -1 }; +static int radio_nr[TYPHOON_MAX] = { [0 ... (TYPHOON_MAX - 1)] = -1 }; static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ; + +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Typhoon card (0x316 or 0x336)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); module_param(mutefreq, ulong, 0); MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)"); -#define BANNER "Typhoon Radio Card driver v" DRIVER_VERSION "\n" - struct typhoon { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; - int curvol; + struct radio_isa_card isa; int muted; - unsigned long curfreq; - unsigned long mutefreq; - struct mutex lock; }; -static struct typhoon typhoon_card; - -static void typhoon_setvol_generic(struct typhoon *dev, int vol) +static struct radio_isa_card *typhoon_alloc(void) { - mutex_lock(&dev->lock); - vol >>= 14; /* Map 16 bit to 2 bit */ - vol &= 3; - outb_p(vol / 2, dev->io); /* Set the volume, high bit. */ - outb_p(vol % 2, dev->io + 2); /* Set the volume, low bit. */ - mutex_unlock(&dev->lock); + struct typhoon *ty = kzalloc(sizeof(*ty), GFP_KERNEL); + + return ty ? &ty->isa : NULL; } -static int typhoon_setfreq_generic(struct typhoon *dev, - unsigned long frequency) +static int typhoon_s_frequency(struct radio_isa_card *isa, u32 freq) { unsigned long outval; unsigned long x; @@ -105,302 +95,86 @@ static int typhoon_setfreq_generic(struct typhoon *dev, * */ - mutex_lock(&dev->lock); - x = frequency / 160; + x = freq / 160; outval = (x * x + 2500) / 5000; outval = (outval * x + 5000) / 10000; outval -= (10 * x * x + 10433) / 20866; outval += 4 * x - 11505; - outb_p((outval >> 8) & 0x01, dev->io + 4); - outb_p(outval >> 9, dev->io + 6); - outb_p(outval & 0xff, dev->io + 8); - mutex_unlock(&dev->lock); - - return 0; -} - -static int typhoon_setfreq(struct typhoon *dev, unsigned long frequency) -{ - typhoon_setfreq_generic(dev, frequency); - dev->curfreq = frequency; - return 0; -} - -static void typhoon_mute(struct typhoon *dev) -{ - if (dev->muted == 1) - return; - typhoon_setvol_generic(dev, 0); - typhoon_setfreq_generic(dev, dev->mutefreq); - dev->muted = 1; -} - -static void typhoon_unmute(struct typhoon *dev) -{ - if (dev->muted == 0) - return; - typhoon_setfreq_generic(dev, dev->curfreq); - typhoon_setvol_generic(dev, dev->curvol); - dev->muted = 0; -} - -static int typhoon_setvol(struct typhoon *dev, int vol) -{ - if (dev->muted && vol != 0) { /* user is unmuting the card */ - dev->curvol = vol; - typhoon_unmute(dev); - return 0; - } - if (vol == dev->curvol) /* requested volume == current */ - return 0; - - if (vol == 0) { /* volume == 0 means mute the card */ - typhoon_mute(dev); - dev->curvol = vol; - return 0; - } - typhoon_setvol_generic(dev, vol); - dev->curvol = vol; - return 0; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-typhoon", sizeof(v->driver)); - strlcpy(v->card, "Typhoon Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 87.5 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF; /* We can't get the signal strength */ - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct typhoon *dev = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = dev->curfreq; - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct typhoon *dev = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - dev->curfreq = f->frequency; - typhoon_setfreq(dev, dev->curfreq); + outb_p((outval >> 8) & 0x01, isa->io + 4); + outb_p(outval >> 9, isa->io + 6); + outb_p(outval & 0xff, isa->io + 8); return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) +static int typhoon_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 16384, 65535); - } - return -EINVAL; -} + struct typhoon *ty = container_of(isa, struct typhoon, isa); -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct typhoon *dev = video_drvdata(file); + if (mute) + vol = 0; + vol >>= 14; /* Map 16 bit to 2 bit */ + vol &= 3; + outb_p(vol / 2, isa->io); /* Set the volume, high bit. */ + outb_p(vol % 2, isa->io + 2); /* Set the volume, low bit. */ - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = dev->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = dev->curvol; - return 0; + if (vol == 0 && !ty->muted) { + ty->muted = true; + return typhoon_s_frequency(isa, mutefreq << 4); } - return -EINVAL; -} - -static int vidioc_s_ctrl (struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct typhoon *dev = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - typhoon_mute(dev); - else - typhoon_unmute(dev); - return 0; - case V4L2_CID_AUDIO_VOLUME: - typhoon_setvol(dev, ctrl->value); - return 0; + if (vol && ty->muted) { + ty->muted = false; + return typhoon_s_frequency(isa, isa->freq); } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; return 0; } -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -static int vidioc_log_status(struct file *file, void *priv) -{ - struct typhoon *dev = video_drvdata(file); - struct v4l2_device *v4l2_dev = &dev->v4l2_dev; - - v4l2_info(v4l2_dev, BANNER); -#ifdef MODULE - v4l2_info(v4l2_dev, "Load type: Driver loaded as a module\n\n"); -#else - v4l2_info(v4l2_dev, "Load type: Driver compiled into kernel\n\n"); -#endif - v4l2_info(v4l2_dev, "frequency = %lu kHz\n", dev->curfreq >> 4); - v4l2_info(v4l2_dev, "volume = %d\n", dev->curvol); - v4l2_info(v4l2_dev, "mute = %s\n", dev->muted ? "on" : "off"); - v4l2_info(v4l2_dev, "io = 0x%x\n", dev->io); - v4l2_info(v4l2_dev, "mute frequency = %lu kHz\n", dev->mutefreq >> 4); - return 0; -} - -static const struct v4l2_file_operations typhoon_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops typhoon_ops = { + .alloc = typhoon_alloc, + .s_mute_volume = typhoon_s_mute_volume, + .s_frequency = typhoon_s_frequency, }; -static const struct v4l2_ioctl_ops typhoon_ioctl_ops = { - .vidioc_log_status = vidioc_log_status, - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int typhoon_ioports[] = { 0x316, 0x336 }; + +static struct radio_isa_driver typhoon_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-typhoon", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = typhoon_ioports, + .num_of_io_ports = ARRAY_SIZE(typhoon_ioports), + .region_size = 8, + .card = "Typhoon Radio", + .ops = &typhoon_ops, + .has_stereo = true, + .max_volume = 3, }; static int __init typhoon_init(void) { - struct typhoon *dev = &typhoon_card; - struct v4l2_device *v4l2_dev = &dev->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name)); - dev->io = io; - - if (dev->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n"); - return -EINVAL; - } - - if (mutefreq < 87000 || mutefreq > 108500) { - v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n"); - v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n"); - return -EINVAL; - } - dev->curfreq = dev->mutefreq = mutefreq << 4; - - mutex_init(&dev->lock); - if (!request_region(dev->io, 8, "typhoon")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", - dev->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(dev->io, 8); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; + if (mutefreq < 87000 || mutefreq > 108000) { + printk(KERN_ERR "%s: You must set a frequency (in kHz) used when muting the card,\n", + typhoon_driver.driver.driver.name); + printk(KERN_ERR "%s: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108000)\n", + typhoon_driver.driver.driver.name); + return -ENODEV; } - v4l2_info(v4l2_dev, BANNER); - - strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); - dev->vdev.v4l2_dev = v4l2_dev; - dev->vdev.fops = &typhoon_fops; - dev->vdev.ioctl_ops = &typhoon_ioctl_ops; - dev->vdev.release = video_device_release_empty; - video_set_drvdata(&dev->vdev, dev); - - /* mute card - prevents noisy bootups */ - typhoon_mute(dev); - - if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(&dev->v4l2_dev); - release_region(dev->io, 8); - return -EINVAL; - } - v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io); - v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq); - - return 0; + return isa_register_driver(&typhoon_driver.driver, TYPHOON_MAX); } static void __exit typhoon_exit(void) { - struct typhoon *dev = &typhoon_card; - - video_unregister_device(&dev->vdev); - v4l2_device_unregister(&dev->v4l2_dev); - release_region(dev->io, 8); + isa_unregister_driver(&typhoon_driver.driver); } + module_init(typhoon_init); module_exit(typhoon_exit); diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index f5613b948203..026e88eef29c 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -1,5 +1,6 @@ -/* zoltrix radio plus driver for Linux radio support - * (c) 1998 C. van Schaik <carl@leg.uct.ac.za> +/* + * Zoltrix Radio Plus driver + * Copyright 1998 C. van Schaik <carl@leg.uct.ac.za> * * BUGS * Due to the inconsistency in reading from the signal flags @@ -27,6 +28,14 @@ * * 2006-07-24 - Converted to V4L2 API * by Mauro Carvalho Chehab <mchehab@infradead.org> + * + * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> + * + * Note that this is the driver for the Zoltrix Radio Plus. + * This driver does not work for the Zoltrix Radio Plus 108 or the + * Zoltrix Radio Plus for Windows. + * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. */ #include <linux/module.h> /* Modules */ @@ -36,82 +45,70 @@ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ +#include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include "radio-isa.h" -MODULE_AUTHOR("C.van Schaik"); +MODULE_AUTHOR("C. van Schaik"); MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus."); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.0.3"); +MODULE_VERSION("0.1.99"); #ifndef CONFIG_RADIO_ZOLTRIX_PORT #define CONFIG_RADIO_ZOLTRIX_PORT -1 #endif -static int io = CONFIG_RADIO_ZOLTRIX_PORT; -static int radio_nr = -1; +#define ZOLTRIX_MAX 2 + +static int io[ZOLTRIX_MAX] = { [0] = CONFIG_RADIO_ZOLTRIX_PORT, + [1 ... (ZOLTRIX_MAX - 1)] = -1 }; +static int radio_nr[ZOLTRIX_MAX] = { [0 ... (ZOLTRIX_MAX - 1)] = -1 }; -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)"); -module_param(radio_nr, int, 0); +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "I/O addresses of the Zoltrix Radio Plus card (0x20c or 0x30c)"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); struct zoltrix { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int io; + struct radio_isa_card isa; int curvol; - unsigned long curfreq; - int muted; - unsigned int stereo; - struct mutex lock; + bool muted; }; -static struct zoltrix zoltrix_card; +static struct radio_isa_card *zoltrix_alloc(void) +{ + struct zoltrix *zol = kzalloc(sizeof(*zol), GFP_KERNEL); + + return zol ? &zol->isa : NULL; +} -static int zol_setvol(struct zoltrix *zol, int vol) +static int zoltrix_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) { - zol->curvol = vol; - if (zol->muted) - return 0; + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); - mutex_lock(&zol->lock); - if (vol == 0) { - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); /* Zoltrix needs to be read to confirm */ - mutex_unlock(&zol->lock); + zol->curvol = vol; + zol->muted = mute; + if (mute || vol == 0) { + outb(0, isa->io); + outb(0, isa->io); + inb(isa->io + 3); /* Zoltrix needs to be read to confirm */ return 0; } - outb(zol->curvol-1, zol->io); + outb(vol - 1, isa->io); msleep(10); - inb(zol->io + 2); - mutex_unlock(&zol->lock); + inb(isa->io + 2); return 0; } -static void zol_mute(struct zoltrix *zol) -{ - zol->muted = 1; - mutex_lock(&zol->lock); - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); /* Zoltrix needs to be read to confirm */ - mutex_unlock(&zol->lock); -} - -static void zol_unmute(struct zoltrix *zol) -{ - zol->muted = 0; - zol_setvol(zol, zol->curvol); -} - -static int zol_setfreq(struct zoltrix *zol, unsigned long freq) +/* tunes the radio to the desired frequency */ +static int zoltrix_s_frequency(struct radio_isa_card *isa, u32 freq) { - /* tunes the radio to the desired frequency */ - struct v4l2_device *v4l2_dev = &zol->v4l2_dev; + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); + struct v4l2_device *v4l2_dev = &isa->v4l2_dev; unsigned long long bitmask, f, m; - unsigned int stereo = zol->stereo; + bool stereo = isa->stereo; int i; if (freq == 0) { @@ -125,340 +122,125 @@ static int zol_setfreq(struct zoltrix *zol, unsigned long freq) bitmask = 0xc480402c10080000ull; i = 45; - mutex_lock(&zol->lock); - - zol->curfreq = freq; - - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); /* Zoltrix needs to be read to confirm */ + outb(0, isa->io); + outb(0, isa->io); + inb(isa->io + 3); /* Zoltrix needs to be read to confirm */ - outb(0x40, zol->io); - outb(0xc0, zol->io); + outb(0x40, isa->io); + outb(0xc0, isa->io); bitmask = (bitmask ^ ((f & 0xff) << 47) ^ ((f & 0xff00) << 30) ^ (stereo << 31)); while (i--) { if ((bitmask & 0x8000000000000000ull) != 0) { - outb(0x80, zol->io); + outb(0x80, isa->io); udelay(50); - outb(0x00, zol->io); + outb(0x00, isa->io); udelay(50); - outb(0x80, zol->io); + outb(0x80, isa->io); udelay(50); } else { - outb(0xc0, zol->io); + outb(0xc0, isa->io); udelay(50); - outb(0x40, zol->io); + outb(0x40, isa->io); udelay(50); - outb(0xc0, zol->io); + outb(0xc0, isa->io); udelay(50); } bitmask *= 2; } /* termination sequence */ - outb(0x80, zol->io); - outb(0xc0, zol->io); - outb(0x40, zol->io); + outb(0x80, isa->io); + outb(0xc0, isa->io); + outb(0x40, isa->io); udelay(1000); - inb(zol->io + 2); - + inb(isa->io + 2); udelay(1000); - if (zol->muted) { - outb(0, zol->io); - outb(0, zol->io); - inb(zol->io + 3); - udelay(1000); - } - - mutex_unlock(&zol->lock); - - if (!zol->muted) - zol_setvol(zol, zol->curvol); - return 0; + return zoltrix_s_mute_volume(isa, zol->muted, zol->curvol); } /* Get signal strength */ -static int zol_getsigstr(struct zoltrix *zol) +static u32 zoltrix_g_rxsubchans(struct radio_isa_card *isa) { + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); int a, b; - mutex_lock(&zol->lock); - outb(0x00, zol->io); /* This stuff I found to do nothing */ - outb(zol->curvol, zol->io); + outb(0x00, isa->io); /* This stuff I found to do nothing */ + outb(zol->curvol, isa->io); msleep(20); - a = inb(zol->io); + a = inb(isa->io); msleep(10); - b = inb(zol->io); + b = inb(isa->io); - mutex_unlock(&zol->lock); - - if (a != b) - return 0; - - /* I found this out by playing with a binary scanner on the card io */ - return a == 0xcf || a == 0xdf || a == 0xef; + return (a == b && a == 0xcf) ? + V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; } -static int zol_is_stereo(struct zoltrix *zol) +static u32 zoltrix_g_signal(struct radio_isa_card *isa) { - int x1, x2; - - mutex_lock(&zol->lock); + struct zoltrix *zol = container_of(isa, struct zoltrix, isa); + int a, b; - outb(0x00, zol->io); - outb(zol->curvol, zol->io); + outb(0x00, isa->io); /* This stuff I found to do nothing */ + outb(zol->curvol, isa->io); msleep(20); - x1 = inb(zol->io); + a = inb(isa->io); msleep(10); - x2 = inb(zol->io); - - mutex_unlock(&zol->lock); - - return x1 == x2 && x1 == 0xcf; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - strlcpy(v->driver, "radio-zoltrix", sizeof(v->driver)); - strlcpy(v->card, "Zoltrix Radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct zoltrix *zol = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = 88 * 16000; - v->rangehigh = 108 * 16000; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - v->capability = V4L2_TUNER_CAP_LOW; - if (zol_is_stereo(zol)) - v->audmode = V4L2_TUNER_MODE_STEREO; - else - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xFFFF * zol_getsigstr(zol); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct zoltrix *zol = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (zol_setfreq(zol, f->frequency) != 0) - return -EINVAL; - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct zoltrix *zol = video_drvdata(file); + b = inb(isa->io); - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = zol->curfreq; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 4096, 65535); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct zoltrix *zol = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = zol->muted; - return 0; - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = zol->curvol * 4096; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct zoltrix *zol = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - zol_mute(zol); - else { - zol_unmute(zol); - zol_setvol(zol, zol->curvol); - } - return 0; - case V4L2_CID_AUDIO_VOLUME: - zol_setvol(zol, ctrl->value / 4096); + if (a != b) return 0; - } - zol->stereo = 1; - if (zol_setfreq(zol, zol->curfreq) != 0) - return -EINVAL; -#if 0 -/* FIXME: Implement stereo/mono switch on V4L2 */ - if (v->mode & VIDEO_SOUND_STEREO) { - zol->stereo = 1; - zol_setfreq(zol, zol->curfreq); - } - if (v->mode & VIDEO_SOUND_MONO) { - zol->stereo = 0; - zol_setfreq(zol, zol->curfreq); - } -#endif - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; + /* I found this out by playing with a binary scanner on the card io */ + return (a == 0xcf || a == 0xdf || a == 0xef) ? 0xffff : 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +static int zoltrix_s_stereo(struct radio_isa_card *isa, bool stereo) { - return a->index ? -EINVAL : 0; + return zoltrix_s_frequency(isa, isa->freq); } -static const struct v4l2_file_operations zoltrix_fops = -{ - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, +static const struct radio_isa_ops zoltrix_ops = { + .alloc = zoltrix_alloc, + .s_mute_volume = zoltrix_s_mute_volume, + .s_frequency = zoltrix_s_frequency, + .s_stereo = zoltrix_s_stereo, + .g_rxsubchans = zoltrix_g_rxsubchans, + .g_signal = zoltrix_g_signal, }; -static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, +static const int zoltrix_ioports[] = { 0x20c, 0x30c }; + +static struct radio_isa_driver zoltrix_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-zoltrix", + }, + }, + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = zoltrix_ioports, + .num_of_io_ports = ARRAY_SIZE(zoltrix_ioports), + .region_size = 2, + .card = "Zoltrix Radio Plus", + .ops = &zoltrix_ops, + .has_stereo = true, + .max_volume = 15, }; static int __init zoltrix_init(void) { - struct zoltrix *zol = &zoltrix_card; - struct v4l2_device *v4l2_dev = &zol->v4l2_dev; - int res; - - strlcpy(v4l2_dev->name, "zoltrix", sizeof(v4l2_dev->name)); - zol->io = io; - if (zol->io == -1) { - v4l2_err(v4l2_dev, "You must set an I/O address with io=0x20c or 0x30c\n"); - return -EINVAL; - } - if (zol->io != 0x20c && zol->io != 0x30c) { - v4l2_err(v4l2_dev, "invalid port, try 0x20c or 0x30c\n"); - return -ENXIO; - } - - if (!request_region(zol->io, 2, "zoltrix")) { - v4l2_err(v4l2_dev, "port 0x%x already in use\n", zol->io); - return -EBUSY; - } - - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(zol->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } - - mutex_init(&zol->lock); - - /* mute card - prevents noisy bootups */ - - /* this ensures that the volume is all the way down */ - - outb(0, zol->io); - outb(0, zol->io); - msleep(20); - inb(zol->io + 3); - - zol->curvol = 0; - zol->stereo = 1; - - strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name)); - zol->vdev.v4l2_dev = v4l2_dev; - zol->vdev.fops = &zoltrix_fops; - zol->vdev.ioctl_ops = &zoltrix_ioctl_ops; - zol->vdev.release = video_device_release_empty; - video_set_drvdata(&zol->vdev, zol); - - if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); - release_region(zol->io, 2); - return -EINVAL; - } - v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n"); - - return 0; + return isa_register_driver(&zoltrix_driver.driver, ZOLTRIX_MAX); } static void __exit zoltrix_exit(void) { - struct zoltrix *zol = &zoltrix_card; - - video_unregister_device(&zol->vdev); - v4l2_device_unregister(&zol->v4l2_dev); - release_region(zol->io, 2); + isa_unregister_driver(&zoltrix_driver.driver); } module_init(zoltrix_init); diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c index b1193dfc5087..9474706350f8 100644 --- a/drivers/media/radio/saa7706h.c +++ b/drivers/media/radio/saa7706h.c @@ -434,18 +434,7 @@ static struct i2c_driver saa7706h_driver = { .id_table = saa7706h_id, }; -static __init int saa7706h_init(void) -{ - return i2c_add_driver(&saa7706h_driver); -} - -static __exit void saa7706h_exit(void) -{ - i2c_del_driver(&saa7706h_driver); -} - -module_init(saa7706h_init); -module_exit(saa7706h_exit); +module_i2c_driver(saa7706h_driver); MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver"); MODULE_AUTHOR("Mocean Laboratories"); diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index fd3541b0e91c..9b546a5523f3 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -539,33 +539,7 @@ static struct i2c_driver si470x_i2c_driver = { .id_table = si470x_i2c_id, }; - - -/************************************************************************** - * Module Interface - **************************************************************************/ - -/* - * si470x_i2c_init - module init - */ -static int __init si470x_i2c_init(void) -{ - printk(KERN_INFO DRIVER_DESC ", Version " DRIVER_VERSION "\n"); - return i2c_add_driver(&si470x_i2c_driver); -} - - -/* - * si470x_i2c_exit - module exit - */ -static void __exit si470x_i2c_exit(void) -{ - i2c_del_driver(&si470x_i2c_driver); -} - - -module_init(si470x_i2c_init); -module_exit(si470x_i2c_exit); +module_i2c_driver(si470x_i2c_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c index 27aba936fb2b..b898c8925ab7 100644 --- a/drivers/media/radio/si4713-i2c.c +++ b/drivers/media/radio/si4713-i2c.c @@ -2106,17 +2106,4 @@ static struct i2c_driver si4713_i2c_driver = { .id_table = si4713_id, }; -/* Module Interface */ -static int __init si4713_module_init(void) -{ - return i2c_add_driver(&si4713_i2c_driver); -} - -static void __exit si4713_module_exit(void) -{ - i2c_del_driver(&si4713_i2c_driver); -} - -module_init(si4713_module_init); -module_exit(si4713_module_exit); - +module_i2c_driver(si4713_i2c_driver); diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c index 3408685b690c..6418c4c9faf1 100644 --- a/drivers/media/radio/tef6862.c +++ b/drivers/media/radio/tef6862.c @@ -215,20 +215,8 @@ static struct i2c_driver tef6862_driver = { .id_table = tef6862_id, }; -static __init int tef6862_init(void) -{ - return i2c_add_driver(&tef6862_driver); -} - -static __exit void tef6862_exit(void) -{ - i2c_del_driver(&tef6862_driver); -} - -module_init(tef6862_init); -module_exit(tef6862_exit); +module_i2c_driver(tef6862_driver); MODULE_DESCRIPTION("TEF6862 Car Radio Enhanced Selectivity Tuner"); MODULE_AUTHOR("Mocean Laboratories"); MODULE_LICENSE("GPL v2"); - diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 4df4affeea5f..a3fbb21350e9 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -266,4 +266,13 @@ config RC_LOOPBACK To compile this driver as a module, choose M here: the module will be called rc_loopback. +config IR_GPIO_CIR + tristate "GPIO IR remote control" + depends on RC_CORE + ---help--- + Say Y if you want to use GPIO based IR Receiver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-recv. + endif #RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index fb3dee2dd845..29f364f88a94 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o obj-$(CONFIG_IR_STREAMZAP) += streamzap.o obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c index 7f7079b12f23..392d4be91f8f 100644 --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -117,7 +117,7 @@ static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset) static void cir_dump_regs(struct fintek_dev *fintek) { fintek_config_mode_enable(fintek); - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); pr_reg("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME); pr_reg(" * CR CIR BASE ADDR: 0x%x\n", @@ -143,7 +143,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek) u8 chip_major, chip_minor; u8 vendor_major, vendor_minor; u8 portsel, ir_class; - u16 vendor; + u16 vendor, chip; int ret = 0; fintek_config_mode_enable(fintek); @@ -176,6 +176,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek) chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI); chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO); + chip = chip_major << 8 | chip_minor; vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI); vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO); @@ -192,6 +193,15 @@ static int fintek_hw_detect(struct fintek_dev *fintek) fintek->chip_major = chip_major; fintek->chip_minor = chip_minor; fintek->chip_vendor = vendor; + + /* + * Newer reviews of this chipset uses port 8 instead of 5 + */ + if ((chip != 0x0408) || (chip != 0x0804)) + fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2; + else + fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1; + spin_unlock_irqrestore(&fintek->fintek_lock, flags); return ret; @@ -200,7 +210,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek) static void fintek_cir_ldev_init(struct fintek_dev *fintek) { /* Select CIR logical device and enable */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); /* Write allocated CIR address and IRQ information to hardware */ @@ -381,7 +391,7 @@ static irqreturn_t fintek_cir_isr(int irq, void *data) fit_dbg_verbose("%s firing", __func__); fintek_config_mode_enable(fintek); - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_config_mode_disable(fintek); /* @@ -422,7 +432,7 @@ static void fintek_enable_cir(struct fintek_dev *fintek) fintek_config_mode_enable(fintek); /* enable the CIR logical device */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); @@ -439,7 +449,7 @@ static void fintek_disable_cir(struct fintek_dev *fintek) fintek_config_mode_enable(fintek); /* disable the CIR logical device */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); @@ -611,7 +621,7 @@ static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state) fintek_config_mode_enable(fintek); /* disable cir logical dev */ - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); @@ -634,7 +644,7 @@ static int fintek_resume(struct pnp_dev *pdev) /* Enable CIR logical device */ fintek_config_mode_enable(fintek); - fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_select_logical_dev(fintek, fintek->logical_dev_cir); fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); fintek_config_mode_disable(fintek); diff --git a/drivers/media/rc/fintek-cir.h b/drivers/media/rc/fintek-cir.h index 1b10b2011f5e..82516a1d39b0 100644 --- a/drivers/media/rc/fintek-cir.h +++ b/drivers/media/rc/fintek-cir.h @@ -88,6 +88,7 @@ struct fintek_dev { u8 chip_major; u8 chip_minor; u16 chip_vendor; + u8 logical_dev_cir; /* hardware features */ bool hw_learning_capable; @@ -172,7 +173,8 @@ struct fintek_dev { #define LOGICAL_DEV_ENABLE 0x01 /* Logical device number of the CIR function */ -#define LOGICAL_DEV_CIR 0x05 +#define LOGICAL_DEV_CIR_REV1 0x05 +#define LOGICAL_DEV_CIR_REV2 0x08 /* CIR Logical Device (LDN 0x08) config registers */ #define CIR_CR_COMMAND_INDEX 0x04 diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c new file mode 100644 index 000000000000..0d875450c5ce --- /dev/null +++ b/drivers/media/rc/gpio-ir-recv.c @@ -0,0 +1,205 @@ +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <media/rc-core.h> +#include <media/gpio-ir-recv.h> + +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv" +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv" + +struct gpio_rc_dev { + struct rc_dev *rcdev; + int gpio_nr; + bool active_low; +}; + +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id) +{ + struct gpio_rc_dev *gpio_dev = dev_id; + int gval; + int rc = 0; + enum raw_event_type type = IR_SPACE; + + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr); + + if (gval < 0) + goto err_get_value; + + if (gpio_dev->active_low) + gval = !gval; + + if (gval == 1) + type = IR_PULSE; + + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type); + if (rc < 0) + goto err_get_value; + + ir_raw_event_handle(gpio_dev->rcdev); + +err_get_value: + return IRQ_HANDLED; +} + +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev) +{ + struct gpio_rc_dev *gpio_dev; + struct rc_dev *rcdev; + const struct gpio_ir_recv_platform_data *pdata = + pdev->dev.platform_data; + int rc; + + if (!pdata) + return -EINVAL; + + if (pdata->gpio_nr < 0) + return -EINVAL; + + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL); + if (!gpio_dev) + return -ENOMEM; + + rcdev = rc_allocate_device(); + if (!rcdev) { + rc = -ENOMEM; + goto err_allocate_device; + } + + rcdev->driver_type = RC_DRIVER_IR_RAW; + rcdev->allowed_protos = RC_TYPE_ALL; + rcdev->input_name = GPIO_IR_DEVICE_NAME; + rcdev->input_id.bustype = BUS_HOST; + rcdev->driver_name = GPIO_IR_DRIVER_NAME; + rcdev->map_name = RC_MAP_EMPTY; + + gpio_dev->rcdev = rcdev; + gpio_dev->gpio_nr = pdata->gpio_nr; + gpio_dev->active_low = pdata->active_low; + + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv"); + if (rc < 0) + goto err_gpio_request; + rc = gpio_direction_input(pdata->gpio_nr); + if (rc < 0) + goto err_gpio_direction_input; + + rc = rc_register_device(rcdev); + if (rc < 0) { + dev_err(&pdev->dev, "failed to register rc device\n"); + goto err_register_rc_device; + } + + platform_set_drvdata(pdev, gpio_dev); + + rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr), + gpio_ir_recv_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "gpio-ir-recv-irq", gpio_dev); + if (rc < 0) + goto err_request_irq; + + return 0; + +err_request_irq: + platform_set_drvdata(pdev, NULL); + rc_unregister_device(rcdev); +err_register_rc_device: +err_gpio_direction_input: + gpio_free(pdata->gpio_nr); +err_gpio_request: + rc_free_device(rcdev); + rcdev = NULL; +err_allocate_device: + kfree(gpio_dev); + return rc; +} + +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev) +{ + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); + + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev); + platform_set_drvdata(pdev, NULL); + rc_unregister_device(gpio_dev->rcdev); + gpio_free(gpio_dev->gpio_nr); + rc_free_device(gpio_dev->rcdev); + kfree(gpio_dev); + return 0; +} + +#ifdef CONFIG_PM +static int gpio_ir_recv_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) + enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr)); + else + disable_irq(gpio_to_irq(gpio_dev->gpio_nr)); + + return 0; +} + +static int gpio_ir_recv_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr)); + else + enable_irq(gpio_to_irq(gpio_dev->gpio_nr)); + + return 0; +} + +static const struct dev_pm_ops gpio_ir_recv_pm_ops = { + .suspend = gpio_ir_recv_suspend, + .resume = gpio_ir_recv_resume, +}; +#endif + +static struct platform_driver gpio_ir_recv_driver = { + .probe = gpio_ir_recv_probe, + .remove = __devexit_p(gpio_ir_recv_remove), + .driver = { + .name = GPIO_IR_DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &gpio_ir_recv_pm_ops, +#endif + }, +}; + +static int __init gpio_ir_recv_init(void) +{ + return platform_driver_register(&gpio_ir_recv_driver); +} +module_init(gpio_ir_recv_init); + +static void __exit gpio_ir_recv_exit(void) +{ + platform_driver_unregister(&gpio_ir_recv_driver); +} +module_exit(gpio_ir_recv_exit); + +MODULE_DESCRIPTION("GPIO IR Receiver driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c index d5e2b50aff1f..dab98b37621a 100644 --- a/drivers/media/rc/ir-sony-decoder.c +++ b/drivers/media/rc/ir-sony-decoder.c @@ -130,7 +130,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev) case 15: device = bitrev8((data->bits >> 0) & 0xFF); subdevice = 0; - function = bitrev8((data->bits >> 7) & 0xFD); + function = bitrev8((data->bits >> 7) & 0xFE); break; case 20: device = bitrev8((data->bits >> 5) & 0xF8); diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile index 36e4d5e8dd6a..49ce2662f56b 100644 --- a/drivers/media/rc/keymaps/Makefile +++ b/drivers/media/rc/keymaps/Makefile @@ -41,8 +41,11 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-imon-mce.o \ rc-imon-pad.o \ rc-iodata-bctv7e.o \ + rc-it913x-v1.o \ + rc-it913x-v2.o \ rc-kaiomy.o \ rc-kworld-315u.o \ + rc-kworld-pc150u.o \ rc-kworld-plus-tv-analog.o \ rc-leadtek-y04g0051.o \ rc-lirc.o \ diff --git a/drivers/media/rc/keymaps/rc-it913x-v1.c b/drivers/media/rc/keymaps/rc-it913x-v1.c new file mode 100644 index 000000000000..0ac775fd109d --- /dev/null +++ b/drivers/media/rc/keymaps/rc-it913x-v1.c @@ -0,0 +1,95 @@ +/* ITE Generic remotes Version 1 + * + * Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + + +static struct rc_map_table it913x_v1_rc[] = { + /* Type 1 */ + { 0x61d601, KEY_VIDEO }, /* Source */ + { 0x61d602, KEY_3 }, + { 0x61d603, KEY_POWER }, /* ShutDown */ + { 0x61d604, KEY_1 }, + { 0x61d605, KEY_5 }, + { 0x61d606, KEY_6 }, + { 0x61d607, KEY_CHANNELDOWN }, /* CH- */ + { 0x61d608, KEY_2 }, + { 0x61d609, KEY_CHANNELUP }, /* CH+ */ + { 0x61d60a, KEY_9 }, + { 0x61d60b, KEY_ZOOM }, /* Zoom */ + { 0x61d60c, KEY_7 }, + { 0x61d60d, KEY_8 }, + { 0x61d60e, KEY_VOLUMEUP }, /* Vol+ */ + { 0x61d60f, KEY_4 }, + { 0x61d610, KEY_ESC }, /* [back up arrow] */ + { 0x61d611, KEY_0 }, + { 0x61d612, KEY_OK }, /* [enter arrow] */ + { 0x61d613, KEY_VOLUMEDOWN }, /* Vol- */ + { 0x61d614, KEY_RECORD }, /* Rec */ + { 0x61d615, KEY_STOP }, /* Stop */ + { 0x61d616, KEY_PLAY }, /* Play */ + { 0x61d617, KEY_MUTE }, /* Mute */ + { 0x61d618, KEY_UP }, + { 0x61d619, KEY_DOWN }, + { 0x61d61a, KEY_LEFT }, + { 0x61d61b, KEY_RIGHT }, + { 0x61d61c, KEY_RED }, + { 0x61d61d, KEY_GREEN }, + { 0x61d61e, KEY_YELLOW }, + { 0x61d61f, KEY_BLUE }, + { 0x61d643, KEY_POWER2 }, /* [red power button] */ + /* Type 2 - 20 buttons */ + { 0x807f0d, KEY_0 }, + { 0x807f04, KEY_1 }, + { 0x807f05, KEY_2 }, + { 0x807f06, KEY_3 }, + { 0x807f07, KEY_4 }, + { 0x807f08, KEY_5 }, + { 0x807f09, KEY_6 }, + { 0x807f0a, KEY_7 }, + { 0x807f1b, KEY_8 }, + { 0x807f1f, KEY_9 }, + { 0x807f12, KEY_POWER }, + { 0x807f01, KEY_MEDIA_REPEAT}, /* Recall */ + { 0x807f19, KEY_PAUSE }, /* Timeshift */ + { 0x807f1e, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ + { 0x807f03, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ + { 0x807f1a, KEY_CHANNELUP }, + { 0x807f02, KEY_CHANNELDOWN }, + { 0x807f0c, KEY_ZOOM }, + { 0x807f00, KEY_RECORD }, + { 0x807f0e, KEY_STOP }, +}; + +static struct rc_map_list it913x_v1_map = { + .map = { + .scan = it913x_v1_rc, + .size = ARRAY_SIZE(it913x_v1_rc), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_IT913X_V1, + } +}; + +static int __init init_rc_it913x_v1_map(void) +{ + return rc_map_register(&it913x_v1_map); +} + +static void __exit exit_rc_it913x_v1_map(void) +{ + rc_map_unregister(&it913x_v1_map); +} + +module_init(init_rc_it913x_v1_map) +module_exit(exit_rc_it913x_v1_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); diff --git a/drivers/media/rc/keymaps/rc-it913x-v2.c b/drivers/media/rc/keymaps/rc-it913x-v2.c new file mode 100644 index 000000000000..28e376e18b99 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-it913x-v2.c @@ -0,0 +1,94 @@ +/* ITE Generic remotes Version 2 + * + * Copyright (C) 2012 Malcolm Priestley (tvboxspy@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + + +static struct rc_map_table it913x_v2_rc[] = { + /* Type 1 */ + /* 9005 remote */ + { 0x807f12, KEY_POWER2 }, /* Power (RED POWER BUTTON)*/ + { 0x807f1a, KEY_VIDEO }, /* Source */ + { 0x807f1e, KEY_MUTE }, /* Mute */ + { 0x807f01, KEY_RECORD }, /* Record */ + { 0x807f02, KEY_CHANNELUP }, /* Channel+ */ + { 0x807f03, KEY_TIME }, /* TimeShift */ + { 0x807f04, KEY_VOLUMEUP }, /* Volume- */ + { 0x807f05, KEY_SCREEN }, /* FullScreen */ + { 0x807f06, KEY_VOLUMEDOWN }, /* Volume- */ + { 0x807f07, KEY_0 }, /* 0 */ + { 0x807f08, KEY_CHANNELDOWN }, /* Channel- */ + { 0x807f09, KEY_PREVIOUS }, /* Recall */ + { 0x807f0a, KEY_1 }, /* 1 */ + { 0x807f1b, KEY_2 }, /* 2 */ + { 0x807f1f, KEY_3 }, /* 3 */ + { 0x807f0c, KEY_4 }, /* 4 */ + { 0x807f0d, KEY_5 }, /* 5 */ + { 0x807f0e, KEY_6 }, /* 6 */ + { 0x807f00, KEY_7 }, /* 7 */ + { 0x807f0f, KEY_8 }, /* 8 */ + { 0x807f19, KEY_9 }, /* 9 */ + + /* Type 2 */ + /* keys stereo, snapshot unassigned */ + { 0x866b00, KEY_0 }, + { 0x866b1b, KEY_1 }, + { 0x866b02, KEY_2 }, + { 0x866b03, KEY_3 }, + { 0x866b04, KEY_4 }, + { 0x866b05, KEY_5 }, + { 0x866b06, KEY_6 }, + { 0x866b07, KEY_7 }, + { 0x866b08, KEY_8 }, + { 0x866b09, KEY_9 }, + { 0x866b12, KEY_POWER }, + { 0x866b13, KEY_MUTE }, + { 0x866b0a, KEY_PREVIOUS }, /* Recall */ + { 0x866b1e, KEY_PAUSE }, + { 0x866b0c, KEY_VOLUMEUP }, + { 0x866b18, KEY_VOLUMEDOWN }, + { 0x866b0b, KEY_CHANNELUP }, + { 0x866b18, KEY_CHANNELDOWN }, + { 0x866b10, KEY_ZOOM }, + { 0x866b1d, KEY_RECORD }, + { 0x866b0e, KEY_STOP }, + { 0x866b11, KEY_EPG}, + { 0x866b1a, KEY_FASTFORWARD }, + { 0x866b0f, KEY_REWIND }, + { 0x866b1c, KEY_TV }, + { 0x866b1b, KEY_TEXT }, + +}; + +static struct rc_map_list it913x_v2_map = { + .map = { + .scan = it913x_v2_rc, + .size = ARRAY_SIZE(it913x_v2_rc), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_IT913X_V2, + } +}; + +static int __init init_rc_it913x_v2_map(void) +{ + return rc_map_register(&it913x_v2_map); +} + +static void __exit exit_rc_it913x_v2_map(void) +{ + rc_map_unregister(&it913x_v2_map); +} + +module_init(init_rc_it913x_v2_map) +module_exit(exit_rc_it913x_v2_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); diff --git a/drivers/media/rc/keymaps/rc-kworld-pc150u.c b/drivers/media/rc/keymaps/rc-kworld-pc150u.c new file mode 100644 index 000000000000..233bb5ee087f --- /dev/null +++ b/drivers/media/rc/keymaps/rc-kworld-pc150u.c @@ -0,0 +1,102 @@ +/* kworld-pc150u.c - Keytable for kworld_pc150u Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Kyle Strickland + * (based on kworld-plus-tv-analog.c by + * Mauro Carvalho Chehab <mchehab@redhat.com>) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + +/* Kworld PC150-U + Kyle Strickland <kyle@kyle.strickland.name> + */ + +static struct rc_map_table kworld_pc150u[] = { + { 0x0c, KEY_MEDIA }, /* Kworld key */ + { 0x16, KEY_EJECTCLOSECD }, /* -> ) */ + { 0x1d, KEY_POWER2 }, + + { 0x00, KEY_1 }, + { 0x01, KEY_2 }, + { 0x02, KEY_3 }, + { 0x03, KEY_4 }, + { 0x04, KEY_5 }, + { 0x05, KEY_6 }, + { 0x06, KEY_7 }, + { 0x07, KEY_8 }, + { 0x08, KEY_9 }, + { 0x0a, KEY_0 }, + + { 0x09, KEY_AGAIN }, + { 0x14, KEY_MUTE }, + + { 0x1e, KEY_LAST }, + { 0x17, KEY_ZOOM }, + { 0x1f, KEY_HOMEPAGE }, + { 0x0e, KEY_ESC }, + + { 0x20, KEY_UP }, + { 0x21, KEY_DOWN }, + { 0x42, KEY_LEFT }, + { 0x43, KEY_RIGHT }, + { 0x0b, KEY_ENTER }, + + { 0x10, KEY_CHANNELUP }, + { 0x11, KEY_CHANNELDOWN }, + + { 0x13, KEY_VOLUMEUP }, + { 0x12, KEY_VOLUMEDOWN }, + + { 0x19, KEY_TIME}, /* Timeshift */ + { 0x1a, KEY_STOP}, + { 0x1b, KEY_RECORD}, + { 0x4b, KEY_EMAIL}, + + { 0x40, KEY_REWIND}, + { 0x44, KEY_PLAYPAUSE}, + { 0x41, KEY_FORWARD}, + { 0x22, KEY_TEXT}, + + { 0x15, KEY_AUDIO}, /* ((*)) */ + { 0x0f, KEY_MODE}, /* display ratio */ + { 0x1c, KEY_SYSRQ}, /* snapshot */ + { 0x4a, KEY_SLEEP}, /* sleep timer */ + + { 0x48, KEY_SOUND}, /* switch theater mode */ + { 0x49, KEY_BLUE}, /* A */ + { 0x18, KEY_RED}, /* B */ + { 0x23, KEY_GREEN}, /* C */ +}; + +static struct rc_map_list kworld_pc150u_map = { + .map = { + .scan = kworld_pc150u, + .size = ARRAY_SIZE(kworld_pc150u), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_KWORLD_PC150U, + } +}; + +static int __init init_rc_map_kworld_pc150u(void) +{ + return rc_map_register(&kworld_pc150u_map); +} + +static void __exit exit_rc_map_kworld_pc150u(void) +{ + rc_map_unregister(&kworld_pc150u_map); +} + +module_init(init_rc_map_kworld_pc150u) +module_exit(exit_rc_map_kworld_pc150u) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kyle Strickland <kyle@kyle.strickland.name>"); diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c index f3b86c8db679..8d4dae2e2ece 100644 --- a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c +++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c @@ -18,6 +18,8 @@ */ static struct rc_map_table nec_terratec_cinergy_xs[] = { + + /* Terratec Grey IR, with most keys in orange */ { 0x1441, KEY_HOME}, { 0x1401, KEY_POWER2}, @@ -78,6 +80,56 @@ static struct rc_map_table nec_terratec_cinergy_xs[] = { { 0x144e, KEY_REWIND}, { 0x144f, KEY_FASTFORWARD}, { 0x145c, KEY_NEXT}, + + /* Terratec Black IR, with most keys in black */ + { 0x04eb01, KEY_POWER2}, + + { 0x04eb02, KEY_1}, + { 0x04eb03, KEY_2}, + { 0x04eb04, KEY_3}, + { 0x04eb05, KEY_4}, + { 0x04eb06, KEY_5}, + { 0x04eb07, KEY_6}, + { 0x04eb08, KEY_7}, + { 0x04eb09, KEY_8}, + { 0x04eb0a, KEY_9}, + { 0x04eb0c, KEY_0}, + + { 0x04eb0b, KEY_TEXT}, /* TXT */ + { 0x04eb0d, KEY_REFRESH}, /* Refresh */ + + { 0x04eb0e, KEY_HOME}, + { 0x04eb0f, KEY_EPG}, + + { 0x04eb10, KEY_UP}, + { 0x04eb11, KEY_LEFT}, + { 0x04eb12, KEY_OK}, + { 0x04eb13, KEY_RIGHT}, + { 0x04eb14, KEY_DOWN}, + + { 0x04eb15, KEY_BACKSPACE}, + { 0x04eb16, KEY_INFO}, + + { 0x04eb17, KEY_RED}, + { 0x04eb18, KEY_GREEN}, + { 0x04eb19, KEY_YELLOW}, + { 0x04eb1a, KEY_BLUE}, + + { 0x04eb1c, KEY_VOLUMEUP}, + { 0x04eb1e, KEY_VOLUMEDOWN}, + + { 0x04eb1d, KEY_MUTE}, + + { 0x04eb1b, KEY_CHANNELUP}, + { 0x04eb1f, KEY_CHANNELDOWN}, + + { 0x04eb40, KEY_RECORD}, + { 0x04eb4c, KEY_PLAY}, + { 0x04eb58, KEY_PAUSE}, + + { 0x04eb54, KEY_REWIND}, + { 0x04eb48, KEY_STOP}, + { 0x04eb5c, KEY_NEXT}, }; static struct rc_map_list nec_terratec_cinergy_xs_map = { diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 21105bf9594d..e150a2e29a4b 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -361,6 +361,8 @@ static struct usb_device_id mceusb_dev_table[] = { { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) }, /* Formosa Industrial Computing */ { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) }, + /* Formosa Industrial Computing */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe042) }, /* Fintek eHome Infrared Transceiver (HP branded) */ { USB_DEVICE(VENDOR_FINTEK, 0x5168) }, /* Fintek eHome Infrared Transceiver */ diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index b72f8580e317..96f0a8bb39ea 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -35,7 +35,7 @@ struct ir_raw_event_ctrl { struct list_head list; /* to keep track of raw clients */ struct task_struct *thread; spinlock_t lock; - struct kfifo kfifo; /* fifo for the pulse/space durations */ + struct kfifo_rec_ptr_1 kfifo; /* fifo for the pulse/space durations */ ktime_t last_event; /* when last event occurred */ enum raw_event_type last_type; /* last event type */ struct rc_dev *dev; /* pointer to the parent rc_dev */ diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index f6a930b70c69..6e16b09c24a9 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1029,6 +1029,7 @@ EXPORT_SYMBOL_GPL(rc_free_device); int rc_register_device(struct rc_dev *dev) { + static bool raw_init = false; /* raw decoders loaded? */ static atomic_t devno = ATOMIC_INIT(0); struct rc_map *rc_map; const char *path; @@ -1103,6 +1104,12 @@ int rc_register_device(struct rc_dev *dev) kfree(path); if (dev->driver_type == RC_DRIVER_IR_RAW) { + /* Load raw decoders, if they aren't already */ + if (!raw_init) { + IR_dprintk(1, "Loading raw decoders\n"); + ir_raw_init(); + raw_init = true; + } rc = ir_raw_event_register(dev); if (rc < 0) goto out_input; @@ -1176,8 +1183,6 @@ static int __init rc_core_init(void) return rc; } - /* Initialize/load the decoders/keymap code that will be used */ - ir_raw_init(); rc_map_register(&empty_map); return 0; diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 9adada0d7447..f2479c5c0eb2 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -273,6 +273,16 @@ config VIDEO_ADV7180 To compile this driver as a module, choose M here: the module will be called adv7180. +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + config VIDEO_BT819 tristate "BT819A VideoStream decoder" depends on VIDEO_V4L2 && I2C @@ -459,6 +469,9 @@ config VIDEO_AK881X comment "Camera sensor devices" +config VIDEO_APTINA_PLL + tristate + config VIDEO_OV7670 tristate "OmniVision OV7670 sensor support" depends on I2C && VIDEO_V4L2 @@ -467,9 +480,28 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_V4L2 && I2C + ---help--- + This is a Video4Linux2 sensor-level driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_V4L2 + select VIDEO_APTINA_PLL + ---help--- + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + config VIDEO_MT9P031 tristate "Aptina MT9P031 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + select VIDEO_APTINA_PLL ---help--- This is a Video4Linux2 sensor-level driver for the Aptina (Micron) mt9p031 5 Mpixel camera. @@ -851,6 +883,8 @@ source "drivers/media/video/davinci/Kconfig" source "drivers/media/video/omap/Kconfig" +source "drivers/media/video/blackfin/Kconfig" + config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on VIDEO_DEV && ARCH_SHMOBILE @@ -1087,7 +1121,7 @@ config VIDEO_MX2_HOSTSUPPORT config VIDEO_MX2 tristate "i.MX27/i.MX25 Camera Sensor Interface driver" depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG select VIDEO_MX2_HOSTSUPPORT ---help--- This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor @@ -1116,7 +1150,8 @@ config VIDEO_ATMEL_ISI config VIDEO_S5P_MIPI_CSIS tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver" - depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P + depends on VIDEO_V4L2_SUBDEV_API && REGULATOR ---help--- This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver. @@ -1176,4 +1211,14 @@ config VIDEO_SAMSUNG_S5P_MFC help MFC 5.1 driver for V4L2. +config VIDEO_MX2_EMMAPRP + tristate "MX2 eMMa-PrP support" + depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27 + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + MX2X chips have a PrP that can be used to process buffers from + memory to memory. Operations include resizing and format + conversion. + endif # V4L_MEM2MEM_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 354138804cda..a6282a3a6a82 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -12,16 +12,19 @@ omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ v4l2-event.o v4l2-ctrls.o v4l2-subdev.o +ifeq ($(CONFIG_COMPAT),y) + videodev-objs += v4l2-compat-ioctl32.o +endif # V4L2 core modules obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o -ifeq ($(CONFIG_COMPAT),y) - obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o -endif - obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o +# Helper modules + +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o + # All i2c modules must come first: obj-$(CONFIG_VIDEO_TUNER) += tuner.o @@ -40,8 +43,10 @@ obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o +obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o +obj-$(CONFIG_VIDEO_VS6624) += vs6624.o obj-$(CONFIG_VIDEO_BT819) += bt819.o obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o @@ -65,6 +70,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o @@ -177,6 +183,8 @@ obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o +obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o + obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ @@ -184,6 +192,8 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ +obj-$(CONFIG_BLACKFIN) += blackfin/ + obj-$(CONFIG_ARCH_DAVINCI) += davinci/ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o @@ -199,6 +209,6 @@ obj-y += davinci/ obj-$(CONFIG_ARCH_OMAP) += omap/ -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends -ccflags-y += -Idrivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/common/tuners diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c index 12eedf4d515a..5b045b4a66fe 100644 --- a/drivers/media/video/adp1653.c +++ b/drivers/media/video/adp1653.c @@ -33,7 +33,6 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/i2c.h> -#include <linux/module.h> #include <linux/slab.h> #include <linux/version.h> #include <media/adp1653.h> @@ -482,24 +481,7 @@ static struct i2c_driver adp1653_i2c_driver = { .id_table = adp1653_id_table, }; -static int __init adp1653_init(void) -{ - int rval; - - rval = i2c_add_driver(&adp1653_i2c_driver); - if (rval) - printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__); - - return rval; -} - -static void __exit adp1653_exit(void) -{ - i2c_del_driver(&adp1653_i2c_driver); -} - -module_init(adp1653_init); -module_exit(adp1653_exit); +module_i2c_driver(adp1653_i2c_driver); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index 879f1d839760..6bc01fb98ff8 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -407,15 +407,4 @@ static struct i2c_driver adv7170_driver = { .id_table = adv7170_id, }; -static __init int init_adv7170(void) -{ - return i2c_add_driver(&adv7170_driver); -} - -static __exit void exit_adv7170(void) -{ - i2c_del_driver(&adv7170_driver); -} - -module_init(init_adv7170); -module_exit(exit_adv7170); +module_i2c_driver(adv7170_driver); diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 206078eca853..c7640fab5730 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -457,15 +457,4 @@ static struct i2c_driver adv7175_driver = { .id_table = adv7175_id, }; -static __init int init_adv7175(void) -{ - return i2c_add_driver(&adv7175_driver); -} - -static __exit void exit_adv7175(void) -{ - i2c_del_driver(&adv7175_driver); -} - -module_init(init_adv7175); -module_exit(exit_adv7175); +module_i2c_driver(adv7175_driver); diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c index d2138d06bcad..b8b6c4b0cad4 100644 --- a/drivers/media/video/adv7180.c +++ b/drivers/media/video/adv7180.c @@ -444,20 +444,8 @@ static struct i2c_driver adv7180_driver = { .id_table = adv7180_id, }; -static __init int adv7180_init(void) -{ - return i2c_add_driver(&adv7180_driver); -} - -static __exit void adv7180_exit(void) -{ - i2c_del_driver(&adv7180_driver); -} - -module_init(adv7180_init); -module_exit(adv7180_exit); +module_i2c_driver(adv7180_driver); MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver"); MODULE_AUTHOR("Mocean Laboratories"); MODULE_LICENSE("GPL v2"); - diff --git a/drivers/media/video/adv7183.c b/drivers/media/video/adv7183.c new file mode 100644 index 000000000000..e1d4c89d7140 --- /dev/null +++ b/drivers/media/video/adv7183.c @@ -0,0 +1,699 @@ +/* + * adv7183.c Analog Devices ADV7183 video decoder driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/adv7183.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> + +#include "adv7183_regs.h" + +struct adv7183 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + + v4l2_std_id std; /* Current set standard */ + u32 input; + u32 output; + unsigned reset_pin; + unsigned oe_pin; + struct v4l2_mbus_framefmt fmt; +}; + +/* EXAMPLES USING 27 MHz CLOCK + * Mode 1 CVBS Input (Composite Video on AIN5) + * All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8. + */ +static const unsigned char adv7183_init_regs[] = { + ADV7183_IN_CTRL, 0x04, /* CVBS input on AIN5 */ + ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */ + ADV7183_SHAP_FILT_CTRL, 0x41, /* Set CSFM to SH1 */ + ADV7183_ADC_CTRL, 0x16, /* Power down ADC 1 and ADC 2 */ + ADV7183_CTI_DNR_CTRL_4, 0x04, /* Set DNR threshold to 4 for flat response */ + /* ADI recommended programming sequence */ + ADV7183_ADI_CTRL, 0x80, + ADV7183_CTI_DNR_CTRL_4, 0x20, + 0x52, 0x18, + 0x58, 0xED, + 0x77, 0xC5, + 0x7C, 0x93, + 0x7D, 0x00, + 0xD0, 0x48, + 0xD5, 0xA0, + 0xD7, 0xEA, + ADV7183_SD_SATURATION_CR, 0x3E, + ADV7183_PAL_V_END, 0x3E, + ADV7183_PAL_F_TOGGLE, 0x0F, + ADV7183_ADI_CTRL, 0x00, +}; + +static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7183, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7183, hdl)->sd; +} + +static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int adv7183_writeregs(struct v4l2_subdev *sd, + const unsigned char *regs, unsigned int num) +{ + unsigned char reg, data; + unsigned int cnt = 0; + + if (num & 0x1) { + v4l2_err(sd, "invalid regs array\n"); + return -1; + } + + while (cnt < num) { + reg = *regs++; + data = *regs++; + cnt += 2; + + adv7183_write(sd, reg, data); + } + return 0; +} + +static int adv7183_log_status(struct v4l2_subdev *sd) +{ + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_info(sd, "adv7183: Input control = 0x%02x\n", + adv7183_read(sd, ADV7183_IN_CTRL)); + v4l2_info(sd, "adv7183: Video selection = 0x%02x\n", + adv7183_read(sd, ADV7183_VD_SEL)); + v4l2_info(sd, "adv7183: Output control = 0x%02x\n", + adv7183_read(sd, ADV7183_OUT_CTRL)); + v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n", + adv7183_read(sd, ADV7183_EXT_OUT_CTRL)); + v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n", + adv7183_read(sd, ADV7183_AUTO_DET_EN)); + v4l2_info(sd, "adv7183: Contrast = 0x%02x\n", + adv7183_read(sd, ADV7183_CONTRAST)); + v4l2_info(sd, "adv7183: Brightness = 0x%02x\n", + adv7183_read(sd, ADV7183_BRIGHTNESS)); + v4l2_info(sd, "adv7183: Hue = 0x%02x\n", + adv7183_read(sd, ADV7183_HUE)); + v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_Y)); + v4l2_info(sd, "adv7183: Default value C = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_C)); + v4l2_info(sd, "adv7183: ADI control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL)); + v4l2_info(sd, "adv7183: Power Management = 0x%02x\n", + adv7183_read(sd, ADV7183_POW_MANAGE)); + v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_STATUS_1), + adv7183_read(sd, ADV7183_STATUS_2), + adv7183_read(sd, ADV7183_STATUS_3)); + v4l2_info(sd, "adv7183: Ident = 0x%02x\n", + adv7183_read(sd, ADV7183_IDENT)); + v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n", + adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL)); + v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n", + adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1)); + v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL), + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2)); + v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n", + adv7183_read(sd, ADV7183_COMB_FILT_CTRL)); + v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL_2)); + v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n", + adv7183_read(sd, ADV7183_PIX_DELAY_CTRL)); + v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n", + adv7183_read(sd, ADV7183_MISC_GAIN_CTRL)); + v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n", + adv7183_read(sd, ADV7183_AGC_MODE_CTRL)); + v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3)); + v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_HS_POS_CTRL_1), + adv7183_read(sd, ADV7183_HS_POS_CTRL_2), + adv7183_read(sd, ADV7183_HS_POS_CTRL_3)); + v4l2_info(sd, "adv7183: Polarity = 0x%02x\n", + adv7183_read(sd, ADV7183_POLARITY)); + v4l2_info(sd, "adv7183: ADC control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADC_CTRL)); + v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_OFFSET_CB), + adv7183_read(sd, ADV7183_SD_OFFSET_CR)); + v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_SATURATION_CB), + adv7183_read(sd, ADV7183_SD_SATURATION_CR)); + v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n", + adv7183_read(sd, ADV7183_DRIVE_STR)); + v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name); + return 0; +} + +static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *std = decoder->std; + return 0; +} + +static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + if (std == V4L2_STD_PAL_60) + reg |= 0x60; + else if (std == V4L2_STD_NTSC_443) + reg |= 0x70; + else if (std == V4L2_STD_PAL_N) + reg |= 0x90; + else if (std == V4L2_STD_PAL_M) + reg |= 0xA0; + else if (std == V4L2_STD_PAL_Nc) + reg |= 0xC0; + else if (std & V4L2_STD_PAL) + reg |= 0x80; + else if (std & V4L2_STD_NTSC) + reg |= 0x50; + else if (std & V4L2_STD_SECAM) + reg |= 0xE0; + else + return -EINVAL; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + decoder->std = std; + + return 0; +} + +static int adv7183_reset(struct v4l2_subdev *sd, u32 val) +{ + int reg; + + reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80; + adv7183_write(sd, ADV7183_POW_MANAGE, reg); + /* wait 5ms before any further i2c writes are performed */ + usleep_range(5000, 10000); + return 0; +} + +static int adv7183_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT)) + return -EINVAL; + + if (input != decoder->input) { + decoder->input = input; + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0; + switch (input) { + case ADV7183_COMPOSITE1: + reg |= 0x1; + break; + case ADV7183_COMPOSITE2: + reg |= 0x2; + break; + case ADV7183_COMPOSITE3: + reg |= 0x3; + break; + case ADV7183_COMPOSITE4: + reg |= 0x4; + break; + case ADV7183_COMPOSITE5: + reg |= 0x5; + break; + case ADV7183_COMPOSITE6: + reg |= 0xB; + break; + case ADV7183_COMPOSITE7: + reg |= 0xC; + break; + case ADV7183_COMPOSITE8: + reg |= 0xD; + break; + case ADV7183_COMPOSITE9: + reg |= 0xE; + break; + case ADV7183_COMPOSITE10: + reg |= 0xF; + break; + case ADV7183_SVIDEO0: + reg |= 0x6; + break; + case ADV7183_SVIDEO1: + reg |= 0x7; + break; + case ADV7183_SVIDEO2: + reg |= 0x8; + break; + case ADV7183_COMPONENT0: + reg |= 0x9; + break; + case ADV7183_COMPONENT1: + reg |= 0xA; + break; + default: + break; + } + adv7183_write(sd, ADV7183_IN_CTRL, reg); + } + + if (output != decoder->output) { + decoder->output = output; + reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0; + switch (output) { + case ADV7183_16BIT_OUT: + reg |= 0x9; + break; + default: + reg |= 0xC; + break; + } + adv7183_write(sd, ADV7183_OUT_CTRL, reg); + } + + return 0; +} + +static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + int val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (val < 0) + val = 127 - val; + adv7183_write(sd, ADV7183_BRIGHTNESS, val); + break; + case V4L2_CID_CONTRAST: + adv7183_write(sd, ADV7183_CONTRAST, val); + break; + case V4L2_CID_SATURATION: + adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF)); + break; + case V4L2_CID_HUE: + adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + /* enable autodetection block */ + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + /* wait autodetection switch */ + mdelay(10); + + /* get autodetection result */ + reg = adv7183_read(sd, ADV7183_STATUS_1); + switch ((reg >> 0x4) & 0x7) { + case 0: + *std = V4L2_STD_NTSC; + break; + case 1: + *std = V4L2_STD_NTSC_443; + break; + case 2: + *std = V4L2_STD_PAL_M; + break; + case 3: + *std = V4L2_STD_PAL_60; + break; + case 4: + *std = V4L2_STD_PAL; + break; + case 5: + *std = V4L2_STD_SECAM; + break; + case 6: + *std = V4L2_STD_PAL_Nc; + break; + case 7: + *std = V4L2_STD_SECAM; + break; + default: + *std = V4L2_STD_UNKNOWN; + break; + } + + /* after std detection, write back user set std */ + adv7183_s_std(sd, decoder->std); + return 0; +} + +static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + int reg; + + *status = V4L2_IN_ST_NO_SIGNAL; + reg = adv7183_read(sd, ADV7183_STATUS_1); + if (reg < 0) + return reg; + if (reg & 0x1) + *status = 0; + return 0; +} + +static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + fmt->code = V4L2_MBUS_FMT_UYVY8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + if (decoder->std & V4L2_STD_525_60) { + fmt->field = V4L2_FIELD_SEQ_TB; + fmt->width = 720; + fmt->height = 480; + } else { + fmt->field = V4L2_FIELD_SEQ_BT; + fmt->width = 720; + fmt->height = 576; + } + return 0; +} + +static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + adv7183_try_mbus_fmt(sd, fmt); + decoder->fmt = *fmt; + return 0; +} + +static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *fmt = decoder->fmt; + return 0; +} + +static int adv7183_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct adv7183 *decoder = to_adv7183(sd); + + if (enable) + gpio_direction_output(decoder->oe_pin, 0); + else + gpio_direction_output(decoder->oe_pin, 1); + udelay(1); + return 0; +} + +static int adv7183_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* 0x11 for adv7183, 0x13 for adv7183b */ + rev = adv7183_read(sd, ADV7183_IDENT); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7183, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = adv7183_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int adv7183_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops adv7183_ctrl_ops = { + .s_ctrl = adv7183_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7183_core_ops = { + .log_status = adv7183_log_status, + .g_std = adv7183_g_std, + .s_std = adv7183_s_std, + .reset = adv7183_reset, + .g_chip_ident = adv7183_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7183_g_register, + .s_register = adv7183_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops adv7183_video_ops = { + .s_routing = adv7183_s_routing, + .querystd = adv7183_querystd, + .g_input_status = adv7183_g_input_status, + .enum_mbus_fmt = adv7183_enum_mbus_fmt, + .try_mbus_fmt = adv7183_try_mbus_fmt, + .s_mbus_fmt = adv7183_s_mbus_fmt, + .g_mbus_fmt = adv7183_g_mbus_fmt, + .s_stream = adv7183_s_stream, +}; + +static const struct v4l2_subdev_ops adv7183_ops = { + .core = &adv7183_core_ops, + .video = &adv7183_video_ops, +}; + +static int adv7183_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7183 *decoder; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int ret; + struct v4l2_mbus_framefmt fmt; + const unsigned *pin_array; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + pin_array = client->dev.platform_data; + if (pin_array == NULL) + return -EINVAL; + + decoder = kzalloc(sizeof(struct adv7183), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + + decoder->reset_pin = pin_array[0]; + decoder->oe_pin = pin_array[1]; + + if (gpio_request(decoder->reset_pin, "ADV7183 Reset")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin); + ret = -EBUSY; + goto err_free_decoder; + } + + if (gpio_request(decoder->oe_pin, "ADV7183 Output Enable")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin); + ret = -EBUSY; + goto err_free_reset; + } + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7183_ops); + + hdl = &decoder->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + ret = hdl->error; + + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + /* v4l2 doesn't support an autodetect standard, pick PAL as default */ + decoder->std = V4L2_STD_PAL; + decoder->input = ADV7183_COMPOSITE4; + decoder->output = ADV7183_8BIT_OUT; + + gpio_direction_output(decoder->oe_pin, 1); + /* reset chip */ + gpio_direction_output(decoder->reset_pin, 0); + /* reset pulse width at least 5ms */ + mdelay(10); + gpio_direction_output(decoder->reset_pin, 1); + /* wait 5ms before any further i2c writes are performed */ + mdelay(5); + + adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs)); + adv7183_s_std(sd, decoder->std); + fmt.width = 720; + fmt.height = 576; + adv7183_s_mbus_fmt(sd, &fmt); + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + return 0; +err_free_oe: + gpio_free(decoder->oe_pin); +err_free_reset: + gpio_free(decoder->reset_pin); +err_free_decoder: + kfree(decoder); + return ret; +} + +static int adv7183_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(decoder->oe_pin); + gpio_free(decoder->reset_pin); + kfree(decoder); + return 0; +} + +static const struct i2c_device_id adv7183_id[] = { + {"adv7183", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7183_id); + +static struct i2c_driver adv7183_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7183", + }, + .probe = adv7183_probe, + .remove = __devexit_p(adv7183_remove), + .id_table = adv7183_id, +}; + +static __init int adv7183_init(void) +{ + return i2c_add_driver(&adv7183_driver); +} + +static __exit void adv7183_exit(void) +{ + i2c_del_driver(&adv7183_driver); +} + +module_init(adv7183_init); +module_exit(adv7183_exit); + +MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/adv7183_regs.h b/drivers/media/video/adv7183_regs.h new file mode 100644 index 000000000000..4a5b7d211d2f --- /dev/null +++ b/drivers/media/video/adv7183_regs.h @@ -0,0 +1,107 @@ +/* + * adv7183 - Analog Devices ADV7183 video decoder registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_REGS_H_ +#define _ADV7183_REGS_H_ + +#define ADV7183_IN_CTRL 0x00 /* Input control */ +#define ADV7183_VD_SEL 0x01 /* Video selection */ +#define ADV7183_OUT_CTRL 0x03 /* Output control */ +#define ADV7183_EXT_OUT_CTRL 0x04 /* Extended output control */ +#define ADV7183_AUTO_DET_EN 0x07 /* Autodetect enable */ +#define ADV7183_CONTRAST 0x08 /* Contrast */ +#define ADV7183_BRIGHTNESS 0x0A /* Brightness */ +#define ADV7183_HUE 0x0B /* Hue */ +#define ADV7183_DEF_Y 0x0C /* Default value Y */ +#define ADV7183_DEF_C 0x0D /* Default value C */ +#define ADV7183_ADI_CTRL 0x0E /* ADI control */ +#define ADV7183_POW_MANAGE 0x0F /* Power Management */ +#define ADV7183_STATUS_1 0x10 /* Status 1 */ +#define ADV7183_IDENT 0x11 /* Ident */ +#define ADV7183_STATUS_2 0x12 /* Status 2 */ +#define ADV7183_STATUS_3 0x13 /* Status 3 */ +#define ADV7183_ANAL_CLAMP_CTRL 0x14 /* Analog clamp control */ +#define ADV7183_DIGI_CLAMP_CTRL_1 0x15 /* Digital clamp control 1 */ +#define ADV7183_SHAP_FILT_CTRL 0x17 /* Shaping filter control */ +#define ADV7183_SHAP_FILT_CTRL_2 0x18 /* Shaping filter control 2 */ +#define ADV7183_COMB_FILT_CTRL 0x19 /* Comb filter control */ +#define ADV7183_ADI_CTRL_2 0x1D /* ADI control 2 */ +#define ADV7183_PIX_DELAY_CTRL 0x27 /* Pixel delay control */ +#define ADV7183_MISC_GAIN_CTRL 0x2B /* Misc gain control */ +#define ADV7183_AGC_MODE_CTRL 0x2C /* AGC mode control */ +#define ADV7183_CHRO_GAIN_CTRL_1 0x2D /* Chroma gain control 1 */ +#define ADV7183_CHRO_GAIN_CTRL_2 0x2E /* Chroma gain control 2 */ +#define ADV7183_LUMA_GAIN_CTRL_1 0x2F /* Luma gain control 1 */ +#define ADV7183_LUMA_GAIN_CTRL_2 0x30 /* Luma gain control 2 */ +#define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */ +#define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */ +#define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */ +#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */ +#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */ +#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */ +#define ADV7183_POLARITY 0x37 /* Polarity */ +#define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */ +#define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */ +#define ADV7183_ADC_CTRL 0x3A /* ADC control */ +#define ADV7183_MAN_WIN_CTRL 0x3D /* Manual window control */ +#define ADV7183_RESAMPLE_CTRL 0x41 /* Resample control */ +#define ADV7183_GEMSTAR_CTRL_1 0x48 /* Gemstar ctrl 1 */ +#define ADV7183_GEMSTAR_CTRL_2 0x49 /* Gemstar ctrl 2 */ +#define ADV7183_GEMSTAR_CTRL_3 0x4A /* Gemstar ctrl 3 */ +#define ADV7183_GEMSTAR_CTRL_4 0x4B /* Gemstar ctrl 4 */ +#define ADV7183_GEMSTAR_CTRL_5 0x4C /* Gemstar ctrl 5 */ +#define ADV7183_CTI_DNR_CTRL_1 0x4D /* CTI DNR ctrl 1 */ +#define ADV7183_CTI_DNR_CTRL_2 0x4E /* CTI DNR ctrl 2 */ +#define ADV7183_CTI_DNR_CTRL_4 0x50 /* CTI DNR ctrl 4 */ +#define ADV7183_LOCK_CNT 0x51 /* Lock count */ +#define ADV7183_FREE_LINE_LEN 0x8F /* Free-Run line length 1 */ +#define ADV7183_VBI_INFO 0x90 /* VBI info */ +#define ADV7183_WSS_1 0x91 /* WSS 1 */ +#define ADV7183_WSS_2 0x92 /* WSS 2 */ +#define ADV7183_EDTV_1 0x93 /* EDTV 1 */ +#define ADV7183_EDTV_2 0x94 /* EDTV 2 */ +#define ADV7183_EDTV_3 0x95 /* EDTV 3 */ +#define ADV7183_CGMS_1 0x96 /* CGMS 1 */ +#define ADV7183_CGMS_2 0x97 /* CGMS 2 */ +#define ADV7183_CGMS_3 0x98 /* CGMS 3 */ +#define ADV7183_CCAP_1 0x99 /* CCAP 1 */ +#define ADV7183_CCAP_2 0x9A /* CCAP 2 */ +#define ADV7183_LETTERBOX_1 0x9B /* Letterbox 1 */ +#define ADV7183_LETTERBOX_2 0x9C /* Letterbox 2 */ +#define ADV7183_LETTERBOX_3 0x9D /* Letterbox 3 */ +#define ADV7183_CRC_EN 0xB2 /* CRC enable */ +#define ADV7183_ADC_SWITCH_1 0xC3 /* ADC switch 1 */ +#define ADV7183_ADC_SWITCH_2 0xC4 /* ADC swithc 2 */ +#define ADV7183_LETTERBOX_CTRL_1 0xDC /* Letterbox control 1 */ +#define ADV7183_LETTERBOX_CTRL_2 0xDD /* Letterbox control 2 */ +#define ADV7183_SD_OFFSET_CB 0xE1 /* SD offset Cb */ +#define ADV7183_SD_OFFSET_CR 0xE2 /* SD offset Cr */ +#define ADV7183_SD_SATURATION_CB 0xE3 /* SD saturation Cb */ +#define ADV7183_SD_SATURATION_CR 0xE4 /* SD saturation Cr */ +#define ADV7183_NTSC_V_BEGIN 0xE5 /* NTSC V bit begin */ +#define ADV7183_NTSC_V_END 0xE6 /* NTSC V bit end */ +#define ADV7183_NTSC_F_TOGGLE 0xE7 /* NTSC F bit toggle */ +#define ADV7183_PAL_V_BEGIN 0xE8 /* PAL V bit begin */ +#define ADV7183_PAL_V_END 0xE9 /* PAL V bit end */ +#define ADV7183_PAL_F_TOGGLE 0xEA /* PAL F bit toggle */ +#define ADV7183_DRIVE_STR 0xF4 /* Drive strength */ +#define ADV7183_IF_COMP_CTRL 0xF8 /* IF comp control */ +#define ADV7183_VS_MODE_CTRL 0xF9 /* VS mode control */ + +#endif diff --git a/drivers/media/video/adv7343.c b/drivers/media/video/adv7343.c index 021fab23070d..119b60401bf3 100644 --- a/drivers/media/video/adv7343.c +++ b/drivers/media/video/adv7343.c @@ -475,15 +475,4 @@ static struct i2c_driver adv7343_driver = { .id_table = adv7343_id, }; -static __init int init_adv7343(void) -{ - return i2c_add_driver(&adv7343_driver); -} - -static __exit void exit_adv7343(void) -{ - i2c_del_driver(&adv7343_driver); -} - -module_init(init_adv7343); -module_exit(exit_adv7343); +module_i2c_driver(adv7343_driver); diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c index 53c496c00fb6..ba674656b10d 100644 --- a/drivers/media/video/ak881x.c +++ b/drivers/media/video/ak881x.c @@ -352,18 +352,7 @@ static struct i2c_driver ak881x_i2c_driver = { .id_table = ak881x_id, }; -static int __init ak881x_module_init(void) -{ - return i2c_add_driver(&ak881x_i2c_driver); -} - -static void __exit ak881x_module_exit(void) -{ - i2c_del_driver(&ak881x_i2c_driver); -} - -module_init(ak881x_module_init); -module_exit(ak881x_module_exit); +module_i2c_driver(ak881x_i2c_driver); MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/media/video/aptina-pll.c b/drivers/media/video/aptina-pll.c new file mode 100644 index 000000000000..0bd3813bb59d --- /dev/null +++ b/drivers/media/video/aptina-pll.c @@ -0,0 +1,174 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/gcd.h> +#include <linux/kernel.h> +#include <linux/lcm.h> +#include <linux/module.h> + +#include "aptina-pll.h" + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll) +{ + unsigned int mf_min; + unsigned int mf_max; + unsigned int p1_min; + unsigned int p1_max; + unsigned int p1; + unsigned int div; + + dev_dbg(dev, "PLL: ext clock %u pix clock %u\n", + pll->ext_clock, pll->pix_clock); + + if (pll->ext_clock < limits->ext_clock_min || + pll->ext_clock > limits->ext_clock_max) { + dev_err(dev, "pll: invalid external clock frequency.\n"); + return -EINVAL; + } + + if (pll->pix_clock == 0 || pll->pix_clock > limits->pix_clock_max) { + dev_err(dev, "pll: invalid pixel clock frequency.\n"); + return -EINVAL; + } + + /* Compute the multiplier M and combined N*P1 divisor. */ + div = gcd(pll->pix_clock, pll->ext_clock); + pll->m = pll->pix_clock / div; + div = pll->ext_clock / div; + + /* We now have the smallest M and N*P1 values that will result in the + * desired pixel clock frequency, but they might be out of the valid + * range. Compute the factor by which we should multiply them given the + * following constraints: + * + * - minimum/maximum multiplier + * - minimum/maximum multiplier output clock frequency assuming the + * minimum/maximum N value + * - minimum/maximum combined N*P1 divisor + */ + mf_min = DIV_ROUND_UP(limits->m_min, pll->m); + mf_min = max(mf_min, limits->out_clock_min / + (pll->ext_clock / limits->n_min * pll->m)); + mf_min = max(mf_min, limits->n_min * limits->p1_min / div); + mf_max = limits->m_max / pll->m; + mf_max = min(mf_max, limits->out_clock_max / + (pll->ext_clock / limits->n_max * pll->m)); + mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div)); + + dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max); + if (mf_min > mf_max) { + dev_err(dev, "pll: no valid combined N*P1 divisor.\n"); + return -EINVAL; + } + + /* + * We're looking for the highest acceptable P1 value for which a + * multiplier factor MF exists that fulfills the following conditions: + * + * 1. p1 is in the [p1_min, p1_max] range given by the limits and is + * even + * 2. mf is in the [mf_min, mf_max] range computed above + * 3. div * mf is a multiple of p1, in order to compute + * n = div * mf / p1 + * m = pll->m * mf + * 4. the internal clock frequency, given by ext_clock / n, is in the + * [int_clock_min, int_clock_max] range given by the limits + * 5. the output clock frequency, given by ext_clock / n * m, is in the + * [out_clock_min, out_clock_max] range given by the limits + * + * The first naive approach is to iterate over all p1 values acceptable + * according to (1) and all mf values acceptable according to (2), and + * stop at the first combination that fulfills (3), (4) and (5). This + * has a O(n^2) complexity. + * + * Instead of iterating over all mf values in the [mf_min, mf_max] range + * we can compute the mf increment between two acceptable values + * according to (3) with + * + * mf_inc = p1 / gcd(div, p1) (6) + * + * and round the minimum up to the nearest multiple of mf_inc. This will + * restrict the number of mf values to be checked. + * + * Furthermore, conditions (4) and (5) only restrict the range of + * acceptable p1 and mf values by modifying the minimum and maximum + * limits. (5) can be expressed as + * + * ext_clock / (div * mf / p1) * m * mf >= out_clock_min + * ext_clock / (div * mf / p1) * m * mf <= out_clock_max + * + * or + * + * p1 >= out_clock_min * div / (ext_clock * m) (7) + * p1 <= out_clock_max * div / (ext_clock * m) + * + * Similarly, (4) can be expressed as + * + * mf >= ext_clock * p1 / (int_clock_max * div) (8) + * mf <= ext_clock * p1 / (int_clock_min * div) + * + * We can thus iterate over the restricted p1 range defined by the + * combination of (1) and (7), and then compute the restricted mf range + * defined by the combination of (2), (6) and (8). If the resulting mf + * range is not empty, any value in the mf range is acceptable. We thus + * select the mf lwoer bound and the corresponding p1 value. + */ + if (limits->p1_min == 0) { + dev_err(dev, "pll: P1 minimum value must be >0.\n"); + return -EINVAL; + } + + p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div, + pll->ext_clock * pll->m)); + p1_max = min(limits->p1_max, limits->out_clock_max * div / + (pll->ext_clock * pll->m)); + + for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) { + unsigned int mf_inc = p1 / gcd(div, p1); + unsigned int mf_high; + unsigned int mf_low; + + mf_low = max(roundup(mf_min, mf_inc), + DIV_ROUND_UP(pll->ext_clock * p1, + limits->int_clock_max * div)); + mf_high = min(mf_max, pll->ext_clock * p1 / + (limits->int_clock_min * div)); + + if (mf_low > mf_high) + continue; + + pll->n = div * mf_low / p1; + pll->m *= mf_low; + pll->p1 = p1; + dev_dbg(dev, "PLL: N %u M %u P1 %u\n", pll->n, pll->m, pll->p1); + return 0; + } + + dev_err(dev, "pll: no valid N and P1 divisors found.\n"); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(aptina_pll_calculate); + +MODULE_DESCRIPTION("Aptina PLL Helpers"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/aptina-pll.h b/drivers/media/video/aptina-pll.h new file mode 100644 index 000000000000..b370e341e75d --- /dev/null +++ b/drivers/media/video/aptina-pll.h @@ -0,0 +1,56 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __APTINA_PLL_H +#define __APTINA_PLL_H + +struct aptina_pll { + unsigned int ext_clock; + unsigned int pix_clock; + + unsigned int n; + unsigned int m; + unsigned int p1; +}; + +struct aptina_pll_limits { + unsigned int ext_clock_min; + unsigned int ext_clock_max; + unsigned int int_clock_min; + unsigned int int_clock_max; + unsigned int out_clock_min; + unsigned int out_clock_max; + unsigned int pix_clock_max; + + unsigned int n_min; + unsigned int n_max; + unsigned int m_min; + unsigned int m_max; + unsigned int p1_min; + unsigned int p1_max; +}; + +struct device; + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll); + +#endif /* __APTINA_PLL_H */ diff --git a/drivers/media/video/as3645a.c b/drivers/media/video/as3645a.c index f241702a0f36..7a3371f044fc 100644 --- a/drivers/media/video/as3645a.c +++ b/drivers/media/video/as3645a.c @@ -881,24 +881,7 @@ static struct i2c_driver as3645a_i2c_driver = { .id_table = as3645a_id_table, }; -static int __init as3645a_init(void) -{ - int rval; - - rval = i2c_add_driver(&as3645a_i2c_driver); - if (rval) - pr_err("%s: Failed to register the driver\n", AS3645A_NAME); - - return rval; -} - -static void __exit as3645a_exit(void) -{ - i2c_del_driver(&as3645a_i2c_driver); -} - -module_init(as3645a_init); -module_exit(as3645a_exit); +module_i2c_driver(as3645a_i2c_driver); MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); diff --git a/drivers/media/video/blackfin/Kconfig b/drivers/media/video/blackfin/Kconfig new file mode 100644 index 000000000000..ecd5323768b7 --- /dev/null +++ b/drivers/media/video/blackfin/Kconfig @@ -0,0 +1,10 @@ +config VIDEO_BLACKFIN_CAPTURE + tristate "Blackfin Video Capture Driver" + depends on VIDEO_V4L2 && BLACKFIN && I2C + select VIDEOBUF2_DMA_CONTIG + help + V4L2 bridge driver for Blackfin video capture device. + Choose PPI or EPPI as its interface. + + To compile this driver as a module, choose M here: the + module will be called bfin_video_capture. diff --git a/drivers/media/video/blackfin/Makefile b/drivers/media/video/blackfin/Makefile new file mode 100644 index 000000000000..aa3a0a216387 --- /dev/null +++ b/drivers/media/video/blackfin/Makefile @@ -0,0 +1,2 @@ +bfin_video_capture-objs := bfin_capture.o ppi.o +obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_video_capture.o diff --git a/drivers/media/video/blackfin/bfin_capture.c b/drivers/media/video/blackfin/bfin_capture.c new file mode 100644 index 000000000000..514fcf742f5a --- /dev/null +++ b/drivers/media/video/blackfin/bfin_capture.c @@ -0,0 +1,1059 @@ +/* + * Analog Devices video capture driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/types.h> + +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-contig.h> + +#include <asm/dma.h> + +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +#define CAPTURE_DRV_NAME "bfin_capture" +#define BCAP_MIN_NUM_BUF 2 + +struct bcap_format { + char *desc; + u32 pixelformat; + enum v4l2_mbus_pixelcode mbus_code; + int bpp; /* bits per pixel */ +}; + +struct bcap_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct bcap_device { + /* capture device instance */ + struct v4l2_device v4l2_dev; + /* v4l2 control handler */ + struct v4l2_ctrl_handler ctrl_handler; + /* device node data */ + struct video_device *video_dev; + /* sub device instance */ + struct v4l2_subdev *sd; + /* capture config */ + struct bfin_capture_config *cfg; + /* ppi interface */ + struct ppi_if *ppi; + /* current input */ + unsigned int cur_input; + /* current selected standard */ + v4l2_std_id std; + /* used to store pixel format */ + struct v4l2_pix_format fmt; + /* bits per pixel*/ + int bpp; + /* used to store sensor supported format */ + struct bcap_format *sensor_formats; + /* number of sensor formats array */ + int num_sensor_formats; + /* pointing to current video buffer */ + struct bcap_buffer *cur_frm; + /* pointing to next video buffer */ + struct bcap_buffer *next_frm; + /* buffer queue used in videobuf2 */ + struct vb2_queue buffer_queue; + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* queue of filled frames */ + struct list_head dma_queue; + /* used in videobuf2 callback */ + spinlock_t lock; + /* used to access capture device */ + struct mutex mutex; + /* used to wait ppi to complete one transfer */ + struct completion comp; + /* prepare to stop */ + bool stop; +}; + +struct bcap_fh { + struct v4l2_fh fh; + /* indicates whether this file handle is doing IO */ + bool io_allowed; +}; + +static const struct bcap_format bcap_formats[] = { + { + .desc = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .bpp = 16, + }, + { + .desc = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .bpp = 16, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .bpp = 16, + }, + { + .desc = "RGB 444", + .pixelformat = V4L2_PIX_FMT_RGB444, + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .bpp = 16, + }, + +}; +#define BCAP_MAX_FMTS ARRAY_SIZE(bcap_formats) + +static irqreturn_t bcap_isr(int irq, void *dev_id); + +static struct bcap_buffer *to_bcap_vb(struct vb2_buffer *vb) +{ + return container_of(vb, struct bcap_buffer, vb); +} + +static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) +{ + enum v4l2_mbus_pixelcode code; + struct bcap_format *sf; + unsigned int num_formats = 0; + int i, j; + + while (!v4l2_subdev_call(bcap_dev->sd, video, + enum_mbus_fmt, num_formats, &code)) + num_formats++; + if (!num_formats) + return -ENXIO; + + sf = kzalloc(num_formats * sizeof(*sf), GFP_KERNEL); + if (!sf) + return -ENOMEM; + + for (i = 0; i < num_formats; i++) { + v4l2_subdev_call(bcap_dev->sd, video, + enum_mbus_fmt, i, &code); + for (j = 0; j < BCAP_MAX_FMTS; j++) + if (code == bcap_formats[j].mbus_code) + break; + if (j == BCAP_MAX_FMTS) { + /* we don't allow this sensor working with our bridge */ + kfree(sf); + return -EINVAL; + } + sf[i] = bcap_formats[j]; + } + bcap_dev->sensor_formats = sf; + bcap_dev->num_sensor_formats = num_formats; + return 0; +} + +static void bcap_free_sensor_formats(struct bcap_device *bcap_dev) +{ + bcap_dev->num_sensor_formats = 0; + kfree(bcap_dev->sensor_formats); + bcap_dev->sensor_formats = NULL; +} + +static int bcap_open(struct file *file) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct video_device *vfd = bcap_dev->video_dev; + struct bcap_fh *bcap_fh; + + if (!bcap_dev->sd) { + v4l2_err(&bcap_dev->v4l2_dev, "No sub device registered\n"); + return -ENODEV; + } + + bcap_fh = kzalloc(sizeof(*bcap_fh), GFP_KERNEL); + if (!bcap_fh) { + v4l2_err(&bcap_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + v4l2_fh_init(&bcap_fh->fh, vfd); + + /* store pointer to v4l2_fh in private_data member of file */ + file->private_data = &bcap_fh->fh; + v4l2_fh_add(&bcap_fh->fh); + bcap_fh->io_allowed = false; + return 0; +} + +static int bcap_release(struct file *file) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + /* if this instance is doing IO */ + if (bcap_fh->io_allowed) + vb2_queue_release(&bcap_dev->buffer_queue); + + file->private_data = NULL; + v4l2_fh_del(&bcap_fh->fh); + v4l2_fh_exit(&bcap_fh->fh); + kfree(bcap_fh); + return 0; +} + +static int bcap_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_mmap(&bcap_dev->buffer_queue, vma); +} + +#ifndef CONFIG_MMU +static unsigned long bcap_get_unmapped_area(struct file *file, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_get_unmapped_area(&bcap_dev->buffer_queue, + addr, + len, + pgoff, + flags); +} +#endif + +static unsigned int bcap_poll(struct file *file, poll_table *wait) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_poll(&bcap_dev->buffer_queue, file, wait); +} + +static int bcap_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + + if (*nbuffers < BCAP_MIN_NUM_BUF) + *nbuffers = BCAP_MIN_NUM_BUF; + + *nplanes = 1; + sizes[0] = bcap_dev->fmt.sizeimage; + alloc_ctxs[0] = bcap_dev->alloc_ctx; + + return 0; +} + +static int bcap_buffer_init(struct vb2_buffer *vb) +{ + struct bcap_buffer *buf = to_bcap_vb(vb); + + INIT_LIST_HEAD(&buf->list); + return 0; +} + +static int bcap_buffer_prepare(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long size; + + size = bcap_dev->fmt.sizeimage; + if (vb2_plane_size(vb, 0) < size) { + v4l2_err(&bcap_dev->v4l2_dev, "buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + vb2_set_plane_payload(&buf->vb, 0, size); + + return 0; +} + +static void bcap_buffer_queue(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long flags; + + spin_lock_irqsave(&bcap_dev->lock, flags); + list_add_tail(&buf->list, &bcap_dev->dma_queue); + spin_unlock_irqrestore(&bcap_dev->lock, flags); +} + +static void bcap_buffer_cleanup(struct vb2_buffer *vb) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); + struct bcap_buffer *buf = to_bcap_vb(vb); + unsigned long flags; + + spin_lock_irqsave(&bcap_dev->lock, flags); + list_del_init(&buf->list); + spin_unlock_irqrestore(&bcap_dev->lock, flags); +} + +static void bcap_lock(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + mutex_lock(&bcap_dev->mutex); +} + +static void bcap_unlock(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + mutex_unlock(&bcap_dev->mutex); +} + +static int bcap_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + struct ppi_if *ppi = bcap_dev->ppi; + struct ppi_params params; + int ret; + + /* enable streamon on the sub device */ + ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 1); + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "stream on failed in subdev\n"); + return ret; + } + + /* set ppi params */ + params.width = bcap_dev->fmt.width; + params.height = bcap_dev->fmt.height; + params.bpp = bcap_dev->bpp; + params.ppi_control = bcap_dev->cfg->ppi_control; + params.int_mask = bcap_dev->cfg->int_mask; + params.blank_clocks = bcap_dev->cfg->blank_clocks; + ret = ppi->ops->set_params(ppi, ¶ms); + if (ret < 0) { + v4l2_err(&bcap_dev->v4l2_dev, + "Error in setting ppi params\n"); + return ret; + } + + /* attach ppi DMA irq handler */ + ret = ppi->ops->attach_irq(ppi, bcap_isr); + if (ret < 0) { + v4l2_err(&bcap_dev->v4l2_dev, + "Error in attaching interrupt handler\n"); + return ret; + } + + INIT_COMPLETION(bcap_dev->comp); + bcap_dev->stop = false; + return 0; +} + +static int bcap_stop_streaming(struct vb2_queue *vq) +{ + struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); + struct ppi_if *ppi = bcap_dev->ppi; + int ret; + + if (!vb2_is_streaming(vq)) + return 0; + + bcap_dev->stop = true; + wait_for_completion(&bcap_dev->comp); + ppi->ops->stop(ppi); + ppi->ops->detach_irq(ppi); + ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&bcap_dev->v4l2_dev, + "stream off failed in subdev\n"); + + /* release all active buffers */ + while (!list_empty(&bcap_dev->dma_queue)) { + bcap_dev->next_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + list_del(&bcap_dev->next_frm->list); + vb2_buffer_done(&bcap_dev->next_frm->vb, VB2_BUF_STATE_ERROR); + } + return 0; +} + +static struct vb2_ops bcap_video_qops = { + .queue_setup = bcap_queue_setup, + .buf_init = bcap_buffer_init, + .buf_prepare = bcap_buffer_prepare, + .buf_cleanup = bcap_buffer_cleanup, + .buf_queue = bcap_buffer_queue, + .wait_prepare = bcap_unlock, + .wait_finish = bcap_lock, + .start_streaming = bcap_start_streaming, + .stop_streaming = bcap_stop_streaming, +}; + +static int bcap_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct vb2_queue *vq = &bcap_dev->buffer_queue; + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (vb2_is_busy(vq)) + return -EBUSY; + + bcap_fh->io_allowed = true; + + return vb2_reqbufs(vq, req_buf); +} + +static int bcap_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return vb2_querybuf(&bcap_dev->buffer_queue, buf); +} + +static int bcap_qbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (!bcap_fh->io_allowed) + return -EBUSY; + + return vb2_qbuf(&bcap_dev->buffer_queue, buf); +} + +static int bcap_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; + struct bcap_fh *bcap_fh = container_of(fh, struct bcap_fh, fh); + + if (!bcap_fh->io_allowed) + return -EBUSY; + + return vb2_dqbuf(&bcap_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +static irqreturn_t bcap_isr(int irq, void *dev_id) +{ + struct ppi_if *ppi = dev_id; + struct bcap_device *bcap_dev = ppi->priv; + struct timeval timevalue; + struct vb2_buffer *vb = &bcap_dev->cur_frm->vb; + dma_addr_t addr; + + spin_lock(&bcap_dev->lock); + + if (bcap_dev->cur_frm != bcap_dev->next_frm) { + do_gettimeofday(&timevalue); + vb->v4l2_buf.timestamp = timevalue; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + bcap_dev->cur_frm = bcap_dev->next_frm; + } + + ppi->ops->stop(ppi); + + if (bcap_dev->stop) { + complete(&bcap_dev->comp); + } else { + if (!list_empty(&bcap_dev->dma_queue)) { + bcap_dev->next_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + list_del(&bcap_dev->next_frm->list); + addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->next_frm->vb, 0); + ppi->ops->update_addr(ppi, (unsigned long)addr); + } + ppi->ops->start(ppi); + } + + spin_unlock(&bcap_dev->lock); + + return IRQ_HANDLED; +} + +static int bcap_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_fh *fh = file->private_data; + struct ppi_if *ppi = bcap_dev->ppi; + dma_addr_t addr; + int ret; + + if (!fh->io_allowed) + return -EBUSY; + + /* call streamon to start streaming in videobuf */ + ret = vb2_streamon(&bcap_dev->buffer_queue, buf_type); + if (ret) + return ret; + + /* if dma queue is empty, return error */ + if (list_empty(&bcap_dev->dma_queue)) { + v4l2_err(&bcap_dev->v4l2_dev, "dma queue is empty\n"); + ret = -EINVAL; + goto err; + } + + /* get the next frame from the dma queue */ + bcap_dev->next_frm = list_entry(bcap_dev->dma_queue.next, + struct bcap_buffer, list); + bcap_dev->cur_frm = bcap_dev->next_frm; + /* remove buffer from the dma queue */ + list_del(&bcap_dev->cur_frm->list); + addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->cur_frm->vb, 0); + /* update DMA address */ + ppi->ops->update_addr(ppi, (unsigned long)addr); + /* enable ppi */ + ppi->ops->start(ppi); + + return 0; +err: + vb2_streamoff(&bcap_dev->buffer_queue, buf_type); + return ret; +} + +static int bcap_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_fh *fh = file->private_data; + + if (!fh->io_allowed) + return -EBUSY; + + return vb2_streamoff(&bcap_dev->buffer_queue, buf_type); +} + +static int bcap_querystd(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, video, querystd, std); +} + +static int bcap_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + *std = bcap_dev->std; + return 0; +} + +static int bcap_s_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + ret = v4l2_subdev_call(bcap_dev->sd, core, s_std, *std); + if (ret < 0) + return ret; + + bcap_dev->std = *std; + return 0; +} + +static int bcap_enum_input(struct file *file, void *priv, + struct v4l2_input *input) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bfin_capture_config *config = bcap_dev->cfg; + int ret; + u32 status; + + if (input->index >= config->num_inputs) + return -EINVAL; + + *input = config->inputs[input->index]; + /* get input status */ + ret = v4l2_subdev_call(bcap_dev->sd, video, g_input_status, &status); + if (!ret) + input->status = status; + return 0; +} + +static int bcap_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + *index = bcap_dev->cur_input; + return 0; +} + +static int bcap_s_input(struct file *file, void *priv, unsigned int index) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bfin_capture_config *config = bcap_dev->cfg; + struct bcap_route *route; + int ret; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + if (index >= config->num_inputs) + return -EINVAL; + + route = &config->routes[index]; + ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing, + route->input, route->output, 0); + if ((ret < 0) && (ret != -ENOIOCTLCMD)) { + v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n"); + return ret; + } + bcap_dev->cur_input = index; + return 0; +} + +static int bcap_try_format(struct bcap_device *bcap, + struct v4l2_pix_format *pixfmt, + enum v4l2_mbus_pixelcode *mbus_code, + int *bpp) +{ + struct bcap_format *sf = bcap->sensor_formats; + struct bcap_format *fmt = NULL; + struct v4l2_mbus_framefmt mbus_fmt; + int ret, i; + + for (i = 0; i < bcap->num_sensor_formats; i++) { + fmt = &sf[i]; + if (pixfmt->pixelformat == fmt->pixelformat) + break; + } + if (i == bcap->num_sensor_formats) + fmt = &sf[0]; + + if (mbus_code) + *mbus_code = fmt->mbus_code; + if (bpp) + *bpp = fmt->bpp; + v4l2_fill_mbus_format(&mbus_fmt, pixfmt, fmt->mbus_code); + ret = v4l2_subdev_call(bcap->sd, video, + try_mbus_fmt, &mbus_fmt); + if (ret < 0) + return ret; + v4l2_fill_pix_format(pixfmt, &mbus_fmt); + pixfmt->bytesperline = pixfmt->width * fmt->bpp / 8; + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + return 0; +} + +static int bcap_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct bcap_format *sf = bcap_dev->sensor_formats; + + if (fmt->index >= bcap_dev->num_sensor_formats) + return -EINVAL; + + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strlcpy(fmt->description, + sf[fmt->index].desc, + sizeof(fmt->description)); + fmt->pixelformat = sf[fmt->index].pixelformat; + return 0; +} + +static int bcap_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + return bcap_try_format(bcap_dev, pixfmt, NULL, NULL); +} + +static int bcap_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + fmt->fmt.pix = bcap_dev->fmt; + return 0; +} + +static int bcap_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + struct v4l2_mbus_framefmt mbus_fmt; + enum v4l2_mbus_pixelcode mbus_code; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret, bpp; + + if (vb2_is_busy(&bcap_dev->buffer_queue)) + return -EBUSY; + + /* see if format works */ + ret = bcap_try_format(bcap_dev, pixfmt, &mbus_code, &bpp); + if (ret < 0) + return ret; + + v4l2_fill_mbus_format(&mbus_fmt, pixfmt, mbus_code); + ret = v4l2_subdev_call(bcap_dev->sd, video, s_mbus_fmt, &mbus_fmt); + if (ret < 0) + return ret; + bcap_dev->fmt = *pixfmt; + bcap_dev->bpp = bpp; + return 0; +} + +static int bcap_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "Blackfin Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, bcap_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int bcap_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return v4l2_subdev_call(bcap_dev->sd, video, g_parm, a); +} + +static int bcap_s_parm(struct file *file, void *fh, + struct v4l2_streamparm *a) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + return v4l2_subdev_call(bcap_dev->sd, video, s_parm, a); +} + +static int bcap_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + return v4l2_subdev_call(bcap_dev->sd, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int bcap_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, core, + g_register, reg); +} + +static int bcap_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + + return v4l2_subdev_call(bcap_dev->sd, core, + s_register, reg); +} +#endif + +static int bcap_log_status(struct file *file, void *priv) +{ + struct bcap_device *bcap_dev = video_drvdata(file); + /* status for sub devices */ + v4l2_device_call_all(&bcap_dev->v4l2_dev, 0, core, log_status); + return 0; +} + +static const struct v4l2_ioctl_ops bcap_ioctl_ops = { + .vidioc_querycap = bcap_querycap, + .vidioc_g_fmt_vid_cap = bcap_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = bcap_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = bcap_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = bcap_try_fmt_vid_cap, + .vidioc_enum_input = bcap_enum_input, + .vidioc_g_input = bcap_g_input, + .vidioc_s_input = bcap_s_input, + .vidioc_querystd = bcap_querystd, + .vidioc_s_std = bcap_s_std, + .vidioc_g_std = bcap_g_std, + .vidioc_reqbufs = bcap_reqbufs, + .vidioc_querybuf = bcap_querybuf, + .vidioc_qbuf = bcap_qbuf, + .vidioc_dqbuf = bcap_dqbuf, + .vidioc_streamon = bcap_streamon, + .vidioc_streamoff = bcap_streamoff, + .vidioc_g_parm = bcap_g_parm, + .vidioc_s_parm = bcap_s_parm, + .vidioc_g_chip_ident = bcap_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = bcap_dbg_g_register, + .vidioc_s_register = bcap_dbg_s_register, +#endif + .vidioc_log_status = bcap_log_status, +}; + +static struct v4l2_file_operations bcap_fops = { + .owner = THIS_MODULE, + .open = bcap_open, + .release = bcap_release, + .unlocked_ioctl = video_ioctl2, + .mmap = bcap_mmap, +#ifndef CONFIG_MMU + .get_unmapped_area = bcap_get_unmapped_area, +#endif + .poll = bcap_poll +}; + +static int __devinit bcap_probe(struct platform_device *pdev) +{ + struct bcap_device *bcap_dev; + struct video_device *vfd; + struct i2c_adapter *i2c_adap; + struct bfin_capture_config *config; + struct vb2_queue *q; + int ret; + + config = pdev->dev.platform_data; + if (!config) { + v4l2_err(pdev->dev.driver, "Unable to get board config\n"); + return -ENODEV; + } + + bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL); + if (!bcap_dev) { + v4l2_err(pdev->dev.driver, "Unable to alloc bcap_dev\n"); + return -ENOMEM; + } + + bcap_dev->cfg = config; + + bcap_dev->ppi = ppi_create_instance(config->ppi_info); + if (!bcap_dev->ppi) { + v4l2_err(pdev->dev.driver, "Unable to create ppi\n"); + ret = -ENODEV; + goto err_free_dev; + } + bcap_dev->ppi->priv = bcap_dev; + + bcap_dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(bcap_dev->alloc_ctx)) { + ret = PTR_ERR(bcap_dev->alloc_ctx); + goto err_free_ppi; + } + + vfd = video_device_alloc(); + if (!vfd) { + ret = -ENOMEM; + v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); + goto err_cleanup_ctx; + } + + /* initialize field of video device */ + vfd->release = video_device_release; + vfd->fops = &bcap_fops; + vfd->ioctl_ops = &bcap_ioctl_ops; + vfd->tvnorms = 0; + vfd->v4l2_dev = &bcap_dev->v4l2_dev; + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + strncpy(vfd->name, CAPTURE_DRV_NAME, sizeof(vfd->name)); + bcap_dev->video_dev = vfd; + + ret = v4l2_device_register(&pdev->dev, &bcap_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device\n"); + goto err_release_vdev; + } + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 device registered\n"); + + bcap_dev->v4l2_dev.ctrl_handler = &bcap_dev->ctrl_handler; + ret = v4l2_ctrl_handler_init(&bcap_dev->ctrl_handler, 0); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to init control handler\n"); + goto err_unreg_v4l2; + } + + spin_lock_init(&bcap_dev->lock); + /* initialize queue */ + q = &bcap_dev->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP; + q->drv_priv = bcap_dev; + q->buf_struct_size = sizeof(struct bcap_buffer); + q->ops = &bcap_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + + vb2_queue_init(q); + + mutex_init(&bcap_dev->mutex); + init_completion(&bcap_dev->comp); + + /* init video dma queues */ + INIT_LIST_HEAD(&bcap_dev->dma_queue); + + vfd->lock = &bcap_dev->mutex; + + /* register video device */ + ret = video_register_device(bcap_dev->video_dev, VFL_TYPE_GRABBER, -1); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to register video device\n"); + goto err_free_handler; + } + video_set_drvdata(bcap_dev->video_dev, bcap_dev); + v4l2_info(&bcap_dev->v4l2_dev, "video device registered as: %s\n", + video_device_node_name(vfd)); + + /* load up the subdevice */ + i2c_adap = i2c_get_adapter(config->i2c_adapter_id); + if (!i2c_adap) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to find i2c adapter\n"); + goto err_unreg_vdev; + + } + bcap_dev->sd = v4l2_i2c_new_subdev_board(&bcap_dev->v4l2_dev, + i2c_adap, + &config->board_info, + NULL); + if (bcap_dev->sd) { + int i; + /* update tvnorms from the sub devices */ + for (i = 0; i < config->num_inputs; i++) + vfd->tvnorms |= config->inputs[i].std; + } else { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to register sub device\n"); + goto err_unreg_vdev; + } + + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 sub device registered\n"); + + /* now we can probe the default state */ + if (vfd->tvnorms) { + v4l2_std_id std; + ret = v4l2_subdev_call(bcap_dev->sd, core, g_std, &std); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to get std\n"); + goto err_unreg_vdev; + } + bcap_dev->std = std; + } + ret = bcap_init_sensor_formats(bcap_dev); + if (ret) { + v4l2_err(&bcap_dev->v4l2_dev, + "Unable to create sensor formats table\n"); + goto err_unreg_vdev; + } + return 0; +err_unreg_vdev: + video_unregister_device(bcap_dev->video_dev); + bcap_dev->video_dev = NULL; +err_free_handler: + v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); +err_unreg_v4l2: + v4l2_device_unregister(&bcap_dev->v4l2_dev); +err_release_vdev: + if (bcap_dev->video_dev) + video_device_release(bcap_dev->video_dev); +err_cleanup_ctx: + vb2_dma_contig_cleanup_ctx(bcap_dev->alloc_ctx); +err_free_ppi: + ppi_delete_instance(bcap_dev->ppi); +err_free_dev: + kfree(bcap_dev); + return ret; +} + +static int __devexit bcap_remove(struct platform_device *pdev) +{ + struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); + struct bcap_device *bcap_dev = container_of(v4l2_dev, + struct bcap_device, v4l2_dev); + + bcap_free_sensor_formats(bcap_dev); + video_unregister_device(bcap_dev->video_dev); + v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); + v4l2_device_unregister(v4l2_dev); + vb2_dma_contig_cleanup_ctx(bcap_dev->alloc_ctx); + ppi_delete_instance(bcap_dev->ppi); + kfree(bcap_dev); + return 0; +} + +static struct platform_driver bcap_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = bcap_probe, + .remove = __devexit_p(bcap_remove), +}; + +static __init int bcap_init(void) +{ + return platform_driver_register(&bcap_driver); +} + +static __exit void bcap_exit(void) +{ + platform_driver_unregister(&bcap_driver); +} + +module_init(bcap_init); +module_exit(bcap_exit); + +MODULE_DESCRIPTION("Analog Devices blackfin video capture driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/blackfin/ppi.c b/drivers/media/video/blackfin/ppi.c new file mode 100644 index 000000000000..d29592186b02 --- /dev/null +++ b/drivers/media/video/blackfin/ppi.c @@ -0,0 +1,271 @@ +/* + * ppi.c Analog Devices Parallel Peripheral Interface driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/slab.h> + +#include <asm/bfin_ppi.h> +#include <asm/blackfin.h> +#include <asm/cacheflush.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#include <media/blackfin/ppi.h> + +static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler); +static void ppi_detach_irq(struct ppi_if *ppi); +static int ppi_start(struct ppi_if *ppi); +static int ppi_stop(struct ppi_if *ppi); +static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params); +static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr); + +static const struct ppi_ops ppi_ops = { + .attach_irq = ppi_attach_irq, + .detach_irq = ppi_detach_irq, + .start = ppi_start, + .stop = ppi_stop, + .set_params = ppi_set_params, + .update_addr = ppi_update_addr, +}; + +static irqreturn_t ppi_irq_err(int irq, void *dev_id) +{ + struct ppi_if *ppi = dev_id; + const struct ppi_info *info = ppi->info; + + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + unsigned short status; + + /* register on bf561 is cleared when read + * others are W1C + */ + status = bfin_read16(®->status); + bfin_write16(®->status, 0xff00); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write16(®->status, 0xffff); + break; + } + default: + break; + } + + return IRQ_HANDLED; +} + +static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler) +{ + const struct ppi_info *info = ppi->info; + int ret; + + ret = request_dma(info->dma_ch, "PPI_DMA"); + + if (ret) { + pr_err("Unable to allocate DMA channel for PPI\n"); + return ret; + } + set_dma_callback(info->dma_ch, handler, ppi); + + if (ppi->err_int) { + ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi); + if (ret) { + pr_err("Unable to allocate IRQ for PPI\n"); + free_dma(info->dma_ch); + } + } + return ret; +} + +static void ppi_detach_irq(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + if (ppi->err_int) + free_irq(info->irq_err, ppi); + free_dma(info->dma_ch); +} + +static int ppi_start(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + /* enable DMA */ + enable_dma(info->dma_ch); + + /* enable PPI */ + ppi->ppi_control |= PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + bfin_write16(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write32(®->control, ppi->ppi_control); + break; + } + default: + return -EINVAL; + } + + SSYNC(); + return 0; +} + +static int ppi_stop(struct ppi_if *ppi) +{ + const struct ppi_info *info = ppi->info; + + /* disable PPI */ + ppi->ppi_control &= ~PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + bfin_write16(®->control, ppi->ppi_control); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + bfin_write32(®->control, ppi->ppi_control); + break; + } + default: + return -EINVAL; + } + + /* disable DMA */ + clear_dma_irqstat(info->dma_ch); + disable_dma(info->dma_ch); + + SSYNC(); + return 0; +} + +static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) +{ + const struct ppi_info *info = ppi->info; + int dma32 = 0; + int dma_config, bytes_per_line, lines_per_frame; + + bytes_per_line = params->width * params->bpp / 8; + lines_per_frame = params->height; + if (params->int_mask == 0xFFFFFFFF) + ppi->err_int = false; + else + ppi->err_int = true; + + dma_config = (DMA_FLOW_STOP | WNR | RESTART | DMA2D | DI_EN); + ppi->ppi_control = params->ppi_control & ~PORT_EN; + switch (info->type) { + case PPI_TYPE_PPI: + { + struct bfin_ppi_regs *reg = info->base; + + if (params->ppi_control & DMA32) + dma32 = 1; + + bfin_write16(®->control, ppi->ppi_control); + bfin_write16(®->count, bytes_per_line - 1); + bfin_write16(®->frame, lines_per_frame); + break; + } + case PPI_TYPE_EPPI: + { + struct bfin_eppi_regs *reg = info->base; + + if ((params->ppi_control & PACK_EN) + || (params->ppi_control & 0x38000) > DLEN_16) + dma32 = 1; + + bfin_write32(®->control, ppi->ppi_control); + bfin_write16(®->line, bytes_per_line + params->blank_clocks); + bfin_write16(®->frame, lines_per_frame); + bfin_write16(®->hdelay, 0); + bfin_write16(®->vdelay, 0); + bfin_write16(®->hcount, bytes_per_line); + bfin_write16(®->vcount, lines_per_frame); + break; + } + default: + return -EINVAL; + } + + if (dma32) { + dma_config |= WDSIZE_32; + set_dma_x_count(info->dma_ch, bytes_per_line >> 2); + set_dma_x_modify(info->dma_ch, 4); + set_dma_y_modify(info->dma_ch, 4); + } else { + dma_config |= WDSIZE_16; + set_dma_x_count(info->dma_ch, bytes_per_line >> 1); + set_dma_x_modify(info->dma_ch, 2); + set_dma_y_modify(info->dma_ch, 2); + } + set_dma_y_count(info->dma_ch, lines_per_frame); + set_dma_config(info->dma_ch, dma_config); + + SSYNC(); + return 0; +} + +static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr) +{ + set_dma_start_addr(ppi->info->dma_ch, addr); +} + +struct ppi_if *ppi_create_instance(const struct ppi_info *info) +{ + struct ppi_if *ppi; + + if (!info || !info->pin_req) + return NULL; + + if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) { + pr_err("request peripheral failed\n"); + return NULL; + } + + ppi = kzalloc(sizeof(*ppi), GFP_KERNEL); + if (!ppi) { + peripheral_free_list(info->pin_req); + pr_err("unable to allocate memory for ppi handle\n"); + return NULL; + } + ppi->ops = &ppi_ops; + ppi->info = info; + + pr_info("ppi probe success\n"); + return ppi; +} + +void ppi_delete_instance(struct ppi_if *ppi) +{ + peripheral_free_list(ppi->info->pin_req); + kfree(ppi); +} diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index 859eabf57978..377bf05b1efd 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -514,15 +514,4 @@ static struct i2c_driver bt819_driver = { .id_table = bt819_id, }; -static __init int init_bt819(void) -{ - return i2c_add_driver(&bt819_driver); -} - -static __exit void exit_bt819(void) -{ - i2c_del_driver(&bt819_driver); -} - -module_init(init_bt819); -module_exit(exit_bt819); +module_i2c_driver(bt819_driver); diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index a43059d4c799..7e5bd365c239 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -270,15 +270,4 @@ static struct i2c_driver bt856_driver = { .id_table = bt856_id, }; -static __init int init_bt856(void) -{ - return i2c_add_driver(&bt856_driver); -} - -static __exit void exit_bt856(void) -{ - i2c_del_driver(&bt856_driver); -} - -module_init(init_bt856); -module_exit(exit_bt856); +module_i2c_driver(bt856_driver); diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 4e5dcea0501d..905320b67a1c 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -240,15 +240,4 @@ static struct i2c_driver bt866_driver = { .id_table = bt866_id, }; -static __init int init_bt866(void) -{ - return i2c_add_driver(&bt866_driver); -} - -static __exit void exit_bt866(void) -{ - i2c_del_driver(&bt866_driver); -} - -module_init(init_bt866); -module_exit(exit_bt866); +module_i2c_driver(bt866_driver); diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 76c301f05095..e581b37be789 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -2035,11 +2035,7 @@ static int bttv_log_status(struct file *file, void *f) struct bttv_fh *fh = f; struct bttv *btv = fh->btv; - pr_info("%d: ======== START STATUS CARD #%d ========\n", - btv->c.nr, btv->c.nr); bttv_call_all(btv, core, log_status); - pr_info("%d: ======== END STATUS CARD #%d ========\n", - btv->c.nr, btv->c.nr); return 0; } diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 1d64af9adf71..c8581e26fa9c 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -249,15 +249,4 @@ static struct i2c_driver cs5345_driver = { .id_table = cs5345_id, }; -static __init int init_cs5345(void) -{ - return i2c_add_driver(&cs5345_driver); -} - -static __exit void exit_cs5345(void) -{ - i2c_del_driver(&cs5345_driver); -} - -module_init(init_cs5345); -module_exit(exit_cs5345); +module_i2c_driver(cs5345_driver); diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index 51c5b9ad67d8..b293912206eb 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -248,15 +248,4 @@ static struct i2c_driver cs53l32a_driver = { .id_table = cs53l32a_id, }; -static __init int init_cs53l32a(void) -{ - return i2c_add_driver(&cs53l32a_driver); -} - -static __exit void exit_cs53l32a(void) -{ - i2c_del_driver(&cs53l32a_driver); -} - -module_init(init_cs53l32a); -module_exit(exit_cs53l32a); +module_i2c_driver(cs53l32a_driver); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 349bd9c2aff5..b55d57cc1a1c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -38,7 +38,7 @@ #include "cx18-ioctl.h" #include "cx18-controls.h" #include "tuner-xc2028.h" - +#include <linux/dma-mapping.h> #include <media/tveeprom.h> /* If you have already X v4l cards, then set this to X. This way @@ -75,7 +75,7 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; static unsigned cardtype_c = 1; static unsigned tuner_c = 1; -static bool radio_c = 1; +static unsigned radio_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; @@ -110,7 +110,7 @@ static int retry_mmio = 1; int cx18_debug; module_param_array(tuner, int, &tuner_c, 0644); -module_param_array(radio, bool, &radio_c, 0644); +module_param_array(radio, int, &radio_c, 0644); module_param_array(cardtype, int, &cardtype_c, 0644); module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); @@ -812,7 +812,7 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, CX18_ERR("Can't enable device %d!\n", cx->instance); return -EIO; } - if (pci_set_dma_mask(pci_dev, 0xffffffff)) { + if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) { CX18_ERR("No suitable DMA available, card %d\n", cx->instance); return -EIO; } diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index b9a94fc5146d..7a37e0ee136f 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -44,8 +44,6 @@ #include <linux/slab.h> #include <asm/byteorder.h> -#include <linux/dvb/video.h> -#include <linux/dvb/audio.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 66b1c15c3541..be49f68ddf37 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -1085,8 +1085,6 @@ static int cx18_log_status(struct file *file, void *fh) struct v4l2_audio audin; int i; - CX18_INFO("================= START STATUS CARD #%d " - "=================\n", cx->instance); CX18_INFO("Version: %s Card: %s\n", CX18_VERSION, cx->card_name); if (cx->hw_flags & CX18_HW_TVEEPROM) { struct tveeprom tv; @@ -1120,8 +1118,6 @@ static int cx18_log_status(struct file *file, void *fh) CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n", (long long)cx->mpg_data_received, (long long)cx->vbi_data_inserted); - CX18_INFO("================== END STATUS CARD #%d " - "==================\n", cx->instance); return 0; } diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c index f8f0e59cd583..d4327dab5a36 100644 --- a/drivers/media/video/cx231xx/cx231xx-417.c +++ b/drivers/media/video/cx231xx/cx231xx-417.c @@ -1686,7 +1686,6 @@ static struct v4l2_capability pvr_capability = { .capabilities = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE), - .reserved = {0, 0, 0, 0} }; static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 875a7ce94736..8ed460d692e0 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -861,7 +861,6 @@ void cx231xx_release_resources(struct cx231xx *dev) kfree(dev->sliced_cc_mode.alt_max_pkt_size); kfree(dev->ts1_mode.alt_max_pkt_size); kfree(dev); - dev = NULL; } /* diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c index 829a41b0c9ef..7f916f0685e9 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/video/cx231xx/cx231xx-video.c @@ -2319,8 +2319,7 @@ static int cx231xx_v4l2_close(struct file *filp) if (dev->state & DEV_DISCONNECTED) { if (atomic_read(&dev->devlist_count) > 0) { cx231xx_release_resources(dev); - kfree(dev); - dev = NULL; + fh->dev = NULL; return 0; } return 0; @@ -2350,8 +2349,7 @@ static int cx231xx_v4l2_close(struct file *filp) free the remaining resources */ if (dev->state & DEV_DISCONNECTED) { cx231xx_release_resources(dev); - kfree(dev); - dev = NULL; + fh->dev = NULL; return 0; } diff --git a/drivers/media/video/cx25821/cx25821-core.c b/drivers/media/video/cx25821/cx25821-core.c index f617474f9073..7930ca58349f 100644 --- a/drivers/media/video/cx25821/cx25821-core.c +++ b/drivers/media/video/cx25821/cx25821-core.c @@ -1474,8 +1474,13 @@ static DEFINE_PCI_DEVICE_TABLE(cx25821_pci_tbl) = { .device = 0x8210, .subvendor = 0x14f1, .subdevice = 0x0920, - }, - { + }, { + /* CX25821 No Brand */ + .vendor = 0x14f1, + .device = 0x8210, + .subvendor = 0x0000, + .subdevice = 0x0000, + }, { /* --- end of list --- */ } }; diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 05247d4c340a..fc1ff69cffd0 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -5301,15 +5301,4 @@ static struct i2c_driver cx25840_driver = { .id_table = cx25840_id, }; -static __init int init_cx25840(void) -{ - return i2c_add_driver(&cx25840_driver); -} - -static __exit void exit_cx25840(void) -{ - i2c_del_driver(&cx25840_driver); -} - -module_init(init_cx25840); -module_exit(exit_cx25840); +module_i2c_driver(cx25840_driver); diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index 25036cb11bea..8bcac65f9294 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -18,8 +18,6 @@ #include <linux/io.h> #include <linux/videodev2.h> -#include <mach/hardware.h> -#include <mach/dm646x.h> #include <media/davinci/vpif_types.h> /* Maximum channel allowed */ diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 286f02910044..7fa34b4fae26 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -39,8 +39,6 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-chip-ident.h> -#include <mach/dm646x.h> - #include "vpif_display.h" #include "vpif.h" diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 4561cd89938d..9fd8cc7dbb23 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -353,6 +353,44 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = { }; #endif +/* 1b80:e425 MaxMedia UB425-TC + * GPIO_6 - demod reset, 0=active + * GPIO_7 - LED, 0=active + */ +static struct em28xx_reg_seq maxmedia_ub425_tc[] = { + {EM2874_R80_GPIO, 0x83, 0xff, 100}, + {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ + {-1, -1, -1, -1}, +}; + +/* 2304:0242 PCTV QuatroStick (510e) + * GPIO_2: decoder reset, 0=active + * GPIO_4: decoder suspend, 0=active + * GPIO_6: demod reset, 0=active + * GPIO_7: LED, 1=active + */ +static struct em28xx_reg_seq pctv_510e[] = { + {EM2874_R80_GPIO, 0x10, 0xff, 100}, + {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + { -1, -1, -1, -1}, +}; + +/* 2013:0251 PCTV QuatroStick nano (520e) + * GPIO_2: decoder reset, 0=active + * GPIO_4: decoder suspend, 0=active + * GPIO_6: demod reset, 0=active + * GPIO_7: LED, 1=active + */ +static struct em28xx_reg_seq pctv_520e[] = { + {EM2874_R80_GPIO, 0x10, 0xff, 100}, + {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -1908,6 +1946,41 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + /* 1b80:e425 MaxMedia UB425-TC + * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ + [EM2874_BOARD_MAXMEDIA_UB425_TC] = { + .name = "MaxMedia UB425-TC", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = maxmedia_ub425_tc, + .has_dvb = 1, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* 2304:0242 PCTV QuatroStick (510e) + * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ + [EM2884_BOARD_PCTV_510E] = { + .name = "PCTV QuatroStick (510e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_510e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, + /* 2013:0251 PCTV QuatroStick nano (520e) + * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ + [EM2884_BOARD_PCTV_520E] = { + .name = "PCTV QuatroStick nano (520e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_520e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -2059,6 +2132,12 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ .driver_info = EM2860_BOARD_EASYCAP }, + { USB_DEVICE(0x1b80, 0xe425), + .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, + { USB_DEVICE(0x2304, 0x0242), + .driver_info = EM2884_BOARD_PCTV_510E }, + { USB_DEVICE(0x2013, 0x0251), + .driver_info = EM2884_BOARD_PCTV_520E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -3122,7 +3201,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, int i, nr; const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; char *speed; - char descr[255] = ""; udev = usb_get_dev(interface_to_usbdev(interface)); @@ -3227,21 +3305,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, speed = "unknown"; } - if (udev->manufacturer) - strlcpy(descr, udev->manufacturer, sizeof(descr)); - - if (udev->product) { - if (*descr) - strlcat(descr, " ", sizeof(descr)); - strlcat(descr, udev->product, sizeof(descr)); - } - - if (*descr) - strlcat(descr, " ", sizeof(descr)); - printk(KERN_INFO DRIVER_NAME - ": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n", - descr, + ": New device %s %s @ %s Mbps " + "(%04x:%04x, interface %d, class %d)\n", + udev->manufacturer ? udev->manufacturer : "", + udev->product ? udev->product : "", speed, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), @@ -3307,6 +3375,17 @@ static int em28xx_usb_probe(struct usb_interface *interface, goto unlock_and_free; } + if (has_dvb) { + /* pre-allocate DVB isoc transfer buffers */ + retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE, + EM28XX_DVB_MAX_PACKETS, + EM28XX_DVB_NUM_BUFS, + dev->dvb_max_pkt_size); + if (retval) { + goto unlock_and_free; + } + } + request_modules(dev); /* Should be the last thing to do, to avoid newer udev's to @@ -3379,7 +3458,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) video_device_node_name(dev->vdev)); dev->state |= DEV_MISCONFIGURED; - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, dev->mode); dev->state |= DEV_DISCONNECTED; wake_up_interruptible(&dev->wait_frame); wake_up_interruptible(&dev->wait_stream); @@ -3388,6 +3467,9 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) em28xx_release_resources(dev); } + /* free DVB isoc buffers */ + em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE); + mutex_unlock(&dev->lock); em28xx_close_extension(dev); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 0aacc96f9a23..53a9fb91e97e 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -666,6 +666,7 @@ int em28xx_capture_start(struct em28xx *dev, int start) return rc; } +EXPORT_SYMBOL_GPL(em28xx_capture_start); int em28xx_vbi_supported(struct em28xx *dev) { @@ -961,146 +962,192 @@ static void em28xx_irq_callback(struct urb *urb) /* * Stop and Deallocate URBs */ -void em28xx_uninit_isoc(struct em28xx *dev) +void em28xx_uninit_isoc(struct em28xx *dev, enum em28xx_mode mode) { struct urb *urb; + struct em28xx_usb_isoc_bufs *isoc_bufs; int i; - em28xx_isocdbg("em28xx: called em28xx_uninit_isoc\n"); + em28xx_isocdbg("em28xx: called em28xx_uninit_isoc in mode %d\n", mode); + + if (mode == EM28XX_DIGITAL_MODE) + isoc_bufs = &dev->isoc_ctl.digital_bufs; + else + isoc_bufs = &dev->isoc_ctl.analog_bufs; dev->isoc_ctl.nfields = -1; - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = dev->isoc_ctl.urb[i]; + for (i = 0; i < isoc_bufs->num_bufs; i++) { + urb = isoc_bufs->urb[i]; if (urb) { if (!irqs_disabled()) usb_kill_urb(urb); else usb_unlink_urb(urb); - if (dev->isoc_ctl.transfer_buffer[i]) { + if (isoc_bufs->transfer_buffer[i]) { usb_free_coherent(dev->udev, urb->transfer_buffer_length, - dev->isoc_ctl.transfer_buffer[i], + isoc_bufs->transfer_buffer[i], urb->transfer_dma); } usb_free_urb(urb); - dev->isoc_ctl.urb[i] = NULL; + isoc_bufs->urb[i] = NULL; } - dev->isoc_ctl.transfer_buffer[i] = NULL; + isoc_bufs->transfer_buffer[i] = NULL; } - kfree(dev->isoc_ctl.urb); - kfree(dev->isoc_ctl.transfer_buffer); + kfree(isoc_bufs->urb); + kfree(isoc_bufs->transfer_buffer); - dev->isoc_ctl.urb = NULL; - dev->isoc_ctl.transfer_buffer = NULL; - dev->isoc_ctl.num_bufs = 0; + isoc_bufs->urb = NULL; + isoc_bufs->transfer_buffer = NULL; + isoc_bufs->num_bufs = 0; em28xx_capture_start(dev, 0); } EXPORT_SYMBOL_GPL(em28xx_uninit_isoc); /* - * Allocate URBs and start IRQ + * Allocate URBs */ -int em28xx_init_isoc(struct em28xx *dev, int max_packets, - int num_bufs, int max_pkt_size, - int (*isoc_copy) (struct em28xx *dev, struct urb *urb)) +int em28xx_alloc_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size) { - struct em28xx_dmaqueue *dma_q = &dev->vidq; - struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq; + struct em28xx_usb_isoc_bufs *isoc_bufs; int i; int sb_size, pipe; struct urb *urb; int j, k; - int rc; - em28xx_isocdbg("em28xx: called em28xx_prepare_isoc\n"); + em28xx_isocdbg("em28xx: called em28xx_alloc_isoc in mode %d\n", mode); + + if (mode == EM28XX_DIGITAL_MODE) + isoc_bufs = &dev->isoc_ctl.digital_bufs; + else + isoc_bufs = &dev->isoc_ctl.analog_bufs; /* De-allocates all pending stuff */ - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); - dev->isoc_ctl.isoc_copy = isoc_copy; - dev->isoc_ctl.num_bufs = num_bufs; + isoc_bufs->num_bufs = num_bufs; - dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); - if (!dev->isoc_ctl.urb) { + isoc_bufs->urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); + if (!isoc_bufs->urb) { em28xx_errdev("cannot alloc memory for usb buffers\n"); return -ENOMEM; } - dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, - GFP_KERNEL); - if (!dev->isoc_ctl.transfer_buffer) { + isoc_bufs->transfer_buffer = kzalloc(sizeof(void *)*num_bufs, + GFP_KERNEL); + if (!isoc_bufs->transfer_buffer) { em28xx_errdev("cannot allocate memory for usb transfer\n"); - kfree(dev->isoc_ctl.urb); + kfree(isoc_bufs->urb); return -ENOMEM; } - dev->isoc_ctl.max_pkt_size = max_pkt_size; + isoc_bufs->max_pkt_size = max_pkt_size; + isoc_bufs->num_packets = max_packets; dev->isoc_ctl.vid_buf = NULL; dev->isoc_ctl.vbi_buf = NULL; - sb_size = max_packets * dev->isoc_ctl.max_pkt_size; + sb_size = isoc_bufs->num_packets * isoc_bufs->max_pkt_size; /* allocate urbs and transfer buffers */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = usb_alloc_urb(max_packets, GFP_KERNEL); + for (i = 0; i < isoc_bufs->num_bufs; i++) { + urb = usb_alloc_urb(isoc_bufs->num_packets, GFP_KERNEL); if (!urb) { em28xx_err("cannot alloc isoc_ctl.urb %i\n", i); - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); return -ENOMEM; } - dev->isoc_ctl.urb[i] = urb; + isoc_bufs->urb[i] = urb; - dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev, + isoc_bufs->transfer_buffer[i] = usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, &urb->transfer_dma); - if (!dev->isoc_ctl.transfer_buffer[i]) { + if (!isoc_bufs->transfer_buffer[i]) { em28xx_err("unable to allocate %i bytes for transfer" " buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); return -ENOMEM; } - memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); + memset(isoc_bufs->transfer_buffer[i], 0, sb_size); /* FIXME: this is a hack - should be 'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK' should also be using 'desc.bInterval' */ pipe = usb_rcvisocpipe(dev->udev, - dev->mode == EM28XX_ANALOG_MODE ? + mode == EM28XX_ANALOG_MODE ? EM28XX_EP_ANALOG : EM28XX_EP_DIGITAL); usb_fill_int_urb(urb, dev->udev, pipe, - dev->isoc_ctl.transfer_buffer[i], sb_size, + isoc_bufs->transfer_buffer[i], sb_size, em28xx_irq_callback, dev, 1); - urb->number_of_packets = max_packets; + urb->number_of_packets = isoc_bufs->num_packets; urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; k = 0; - for (j = 0; j < max_packets; j++) { + for (j = 0; j < isoc_bufs->num_packets; j++) { urb->iso_frame_desc[j].offset = k; urb->iso_frame_desc[j].length = - dev->isoc_ctl.max_pkt_size; - k += dev->isoc_ctl.max_pkt_size; + isoc_bufs->max_pkt_size; + k += isoc_bufs->max_pkt_size; } } + return 0; +} +EXPORT_SYMBOL_GPL(em28xx_alloc_isoc); + +/* + * Allocate URBs and start IRQ + */ +int em28xx_init_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size, + int (*isoc_copy) (struct em28xx *dev, struct urb *urb)) +{ + struct em28xx_dmaqueue *dma_q = &dev->vidq; + struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq; + struct em28xx_usb_isoc_bufs *isoc_bufs; + int i; + int rc; + int alloc; + + em28xx_isocdbg("em28xx: called em28xx_init_isoc in mode %d\n", mode); + + dev->isoc_ctl.isoc_copy = isoc_copy; + + if (mode == EM28XX_DIGITAL_MODE) { + isoc_bufs = &dev->isoc_ctl.digital_bufs; + /* no need to free/alloc isoc buffers in digital mode */ + alloc = 0; + } else { + isoc_bufs = &dev->isoc_ctl.analog_bufs; + alloc = 1; + } + + if (alloc) { + rc = em28xx_alloc_isoc(dev, mode, max_packets, + num_bufs, max_pkt_size); + if (rc) + return rc; + } + init_waitqueue_head(&dma_q->wq); init_waitqueue_head(&vbi_dma_q->wq); em28xx_capture_start(dev, 1); /* submit urbs and enables IRQ */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); + for (i = 0; i < isoc_bufs->num_bufs; i++) { + rc = usb_submit_urb(isoc_bufs->urb[i], GFP_ATOMIC); if (rc) { em28xx_err("submit of urb %i failed (error=%i)\n", i, rc); - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, mode); return rc; } } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index aabbf4854f66..503a8d5b5382 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -61,9 +61,6 @@ if (debug >= level) \ printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \ } while (0) -#define EM28XX_DVB_NUM_BUFS 5 -#define EM28XX_DVB_MAX_PACKETS 64 - struct em28xx_dvb { struct dvb_frontend *fe[2]; @@ -172,20 +169,21 @@ static int em28xx_start_streaming(struct em28xx_dvb *dvb) max_dvb_packet_size = dev->dvb_max_pkt_size; if (max_dvb_packet_size < 0) return max_dvb_packet_size; - dprintk(1, "Using %d buffers each with %d bytes\n", + dprintk(1, "Using %d buffers each with %d x %d bytes\n", EM28XX_DVB_NUM_BUFS, + EM28XX_DVB_MAX_PACKETS, max_dvb_packet_size); - return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, - EM28XX_DVB_NUM_BUFS, max_dvb_packet_size, - em28xx_dvb_isoc_copy); + return em28xx_init_isoc(dev, EM28XX_DIGITAL_MODE, + EM28XX_DVB_MAX_PACKETS, EM28XX_DVB_NUM_BUFS, + max_dvb_packet_size, em28xx_dvb_isoc_copy); } static int em28xx_stop_streaming(struct em28xx_dvb *dvb) { struct em28xx *dev = dvb->adapter.priv; - em28xx_uninit_isoc(dev); + em28xx_capture_start(dev, 0); em28xx_set_mode(dev, EM28XX_SUSPEND); @@ -327,6 +325,19 @@ struct drxk_config hauppauge_930c_drxk = { .chunk_size = 56, }; +struct drxk_config maxmedia_ub425_tc_drxk = { + .adr = 0x29, + .single_master = 1, + .no_i2c_bridge = 1, +}; + +struct drxk_config pctv_520e_drxk = { + .adr = 0x29, + .single_master = 1, + .microcode_name = "dvb-demod-drxk-pctv.fw", + .chunk_size = 58, +}; + static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) { struct em28xx_dvb *dvb = fe->sec_priv; @@ -460,6 +471,33 @@ static void terratec_h5_init(struct em28xx *dev) em28xx_gpio_set(dev, terratec_h5_end); }; +static void pctv_520e_init(struct em28xx *dev) +{ + /* + * Init TDA8295(?) analog demodulator. Looks like I2C traffic to + * digital demodulator and tuner are routed via TDA8295. + */ + int i; + struct { + unsigned char r[4]; + int len; + } regs[] = { + {{ 0x06, 0x02, 0x00, 0x31 }, 4}, + {{ 0x01, 0x02 }, 2}, + {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0xff, 0xaf }, 4}, + {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0x73, 0xaf }, 4}, + }; + + dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */ + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); +}; + static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe) { /* Values extracted from a USB trace of the Terratec Windows driver */ @@ -938,6 +976,48 @@ static int em28xx_dvb_init(struct em28xx *dev) dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap, &em28xx_a8293_config); break; + case EM2874_BOARD_MAXMEDIA_UB425_TC: + /* attach demodulator */ + dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk, + &dev->i2c_adap); + + if (dvb->fe[0]) { + /* disable I2C-gate */ + dvb->fe[0]->ops.i2c_gate_ctrl = NULL; + + /* attach tuner */ + if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], + &dev->i2c_adap, 0x60)) { + dvb_frontend_detach(dvb->fe[0]); + result = -EINVAL; + goto out_free; + } + } + + /* TODO: we need drx-3913k firmware in order to support DVB-T */ + em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \ + "driver version\n"); + + break; + case EM2884_BOARD_PCTV_510E: + case EM2884_BOARD_PCTV_520E: + pctv_520e_init(dev); + + /* attach demodulator */ + dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk, + &dev->i2c_adap); + + if (dvb->fe[0]) { + /* attach tuner */ + if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, + &dev->i2c_adap, + &em28xx_cxd2820r_tda18271_config)) { + dvb_frontend_detach(dvb->fe[0]); + result = -EINVAL; + goto out_free; + } + } + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 36f5a9bc8b76..a88e169dba23 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -41,14 +41,6 @@ static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); - -#define dprintk1(lvl, fmt, args...) \ -do { \ - if (i2c_debug >= lvl) { \ - printk(fmt, ##args); \ - } \ -} while (0) - #define dprintk2(lvl, fmt, args...) \ do { \ if (i2c_debug >= lvl) { \ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 613300b51a9e..324b695c0724 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -760,17 +760,19 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, goto fail; } - if (!dev->isoc_ctl.num_bufs) + if (!dev->isoc_ctl.analog_bufs.num_bufs) urb_init = 1; if (urb_init) { if (em28xx_vbi_supported(dev) == 1) - rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS, + rc = em28xx_init_isoc(dev, EM28XX_ANALOG_MODE, + EM28XX_NUM_PACKETS, EM28XX_NUM_BUFS, dev->max_pkt_size, em28xx_isoc_copy_vbi); else - rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS, + rc = em28xx_init_isoc(dev, EM28XX_ANALOG_MODE, + EM28XX_NUM_PACKETS, EM28XX_NUM_BUFS, dev->max_pkt_size, em28xx_isoc_copy); @@ -2267,7 +2269,7 @@ static int em28xx_v4l2_close(struct file *filp) v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); /* do this before setting alternate! */ - em28xx_uninit_isoc(dev); + em28xx_uninit_isoc(dev, EM28XX_ANALOG_MODE); em28xx_set_mode(dev, EM28XX_SUSPEND); /* set alternate 0 */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 22e252bcc41e..2868b19f8b54 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -125,6 +125,9 @@ #define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81 #define EM2884_BOARD_CINERGY_HTC_STICK 82 #define EM2860_BOARD_HT_VIDBOX_NW03 83 +#define EM2874_BOARD_MAXMEDIA_UB425_TC 84 +#define EM2884_BOARD_PCTV_510E 85 +#define EM2884_BOARD_PCTV_520E 86 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -151,12 +154,14 @@ /* number of buffers for isoc transfers */ #define EM28XX_NUM_BUFS 5 +#define EM28XX_DVB_NUM_BUFS 5 /* number of packets for each buffer windows requests only 64 packets .. so we better do the same this is what I found out for all alternate numbers there! */ #define EM28XX_NUM_PACKETS 64 +#define EM28XX_DVB_MAX_PACKETS 64 #define EM28XX_INTERLACED_DEFAULT 1 @@ -197,10 +202,13 @@ enum em28xx_mode { struct em28xx; -struct em28xx_usb_isoc_ctl { +struct em28xx_usb_isoc_bufs { /* max packet size of isoc transaction */ int max_pkt_size; + /* number of packets in each buffer */ + int num_packets; + /* number of allocated urbs */ int num_bufs; @@ -209,6 +217,14 @@ struct em28xx_usb_isoc_ctl { /* transfer buffers for isoc transfer */ char **transfer_buffer; +}; + +struct em28xx_usb_isoc_ctl { + /* isoc transfer buffers for analog mode */ + struct em28xx_usb_isoc_bufs analog_bufs; + + /* isoc transfer buffers for digital mode */ + struct em28xx_usb_isoc_bufs digital_bufs; /* Last buffer command and region */ u8 cmd; @@ -600,9 +616,6 @@ struct em28xx { unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ int dvb_alt; /* alternate for DVB */ unsigned int dvb_max_pkt_size; /* wMaxPacketSize for DVB */ - struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ - char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc - transfer */ char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */ /* helper funcs that call usb_control_msg */ @@ -676,10 +689,12 @@ int em28xx_vbi_supported(struct em28xx *dev); int em28xx_set_outfmt(struct em28xx *dev); int em28xx_resolution_set(struct em28xx *dev); int em28xx_set_alternate(struct em28xx *dev); -int em28xx_init_isoc(struct em28xx *dev, int max_packets, - int num_bufs, int max_pkt_size, +int em28xx_alloc_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size); +int em28xx_init_isoc(struct em28xx *dev, enum em28xx_mode mode, + int max_packets, int num_bufs, int max_pkt_size, int (*isoc_copy) (struct em28xx *dev, struct urb *urb)); -void em28xx_uninit_isoc(struct em28xx *dev); +void em28xx_uninit_isoc(struct em28xx *dev, enum em28xx_mode mode); int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev); int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode); int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio); diff --git a/drivers/media/video/gspca/gl860/Makefile b/drivers/media/video/gspca/gl860/Makefile index f511eccdfd9c..773ea3426561 100644 --- a/drivers/media/video/gspca/gl860/Makefile +++ b/drivers/media/video/gspca/gl860/Makefile @@ -6,5 +6,5 @@ gspca_gl860-objs := gl860.o \ gl860-ov9655.o \ gl860-mi2020.o -ccflags-y += -Idrivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/video/gspca diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile index 7f52961f439c..575b75bacb62 100644 --- a/drivers/media/video/gspca/m5602/Makefile +++ b/drivers/media/video/gspca/m5602/Makefile @@ -8,4 +8,4 @@ gspca_m5602-objs := m5602_core.o \ m5602_s5k83a.o \ m5602_s5k4aa.o -ccflags-y += -Idrivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/video/gspca diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c index fbfa02affa13..e6601b886032 100644 --- a/drivers/media/video/gspca/ov534_9.c +++ b/drivers/media/video/gspca/ov534_9.c @@ -1107,16 +1107,34 @@ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 val; + s8 sval; if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS)) return; - val = sd->ctrls[BRIGHTNESS].val; - if (val < 8) - val = 15 - val; /* f .. 8 */ - else - val = val - 8; /* 0 .. 7 */ - sccb_write(gspca_dev, 0x55, /* brtn - brightness adjustment */ - 0x0f | (val << 4)); + if (sd->sensor == SENSOR_OV562x) { + sval = sd->ctrls[BRIGHTNESS].val; + val = 0x76; + val += sval; + sccb_write(gspca_dev, 0x24, val); + val = 0x6a; + val += sval; + sccb_write(gspca_dev, 0x25, val); + if (sval < -40) + val = 0x71; + else if (sval < 20) + val = 0x94; + else + val = 0xe6; + sccb_write(gspca_dev, 0x26, val); + } else { + val = sd->ctrls[BRIGHTNESS].val; + if (val < 8) + val = 15 - val; /* f .. 8 */ + else + val = val - 8; /* 0 .. 7 */ + sccb_write(gspca_dev, 0x55, /* brtn - brightness adjustment */ + 0x0f | (val << 4)); + } } static void setcontrast(struct gspca_dev *gspca_dev) @@ -1339,7 +1357,16 @@ static int sd_init(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x56, 0x17); } else if ((sensor_id & 0xfff0) == 0x5620) { sd->sensor = SENSOR_OV562x; - + gspca_dev->ctrl_dis = (1 << CONTRAST) | + (1 << AUTOGAIN) | + (1 << EXPOSURE) | + (1 << SHARPNESS) | + (1 << SATUR) | + (1 << LIGHTFREQ); + + sd->ctrls[BRIGHTNESS].min = -90; + sd->ctrls[BRIGHTNESS].max = 90; + sd->ctrls[BRIGHTNESS].def = 0; gspca_dev->cam.cam_mode = ov562x_mode; gspca_dev->cam.nmodes = ARRAY_SIZE(ov562x_mode); @@ -1360,8 +1387,12 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->sensor == SENSOR_OV971x || sd->sensor == SENSOR_OV562x) + if (sd->sensor == SENSOR_OV971x) return gspca_dev->usb_err; + else if (sd->sensor == SENSOR_OV562x) { + setbrightness(gspca_dev); + return gspca_dev->usb_err; + } switch (gspca_dev->curr_mode) { case QVGA_MODE: /* 320x240 */ sccb_w_array(gspca_dev, ov965x_start_1_vga, diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c index 9db2b34d172c..30662fccb0cf 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/video/gspca/pac7302.c @@ -1,8 +1,8 @@ /* - * Pixart PAC7302 library - * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li + * Pixart PAC7302 driver * - * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2008-2012 Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li * * Separated from Pixart PAC7311 library by Márton Németh * Camera button input handling by Márton Németh <nm127@freemail.hu> @@ -63,67 +63,61 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#define MODULE_NAME "pac7302" - #include <linux/input.h> #include <media/v4l2-chip-ident.h> #include "gspca.h" +/* Include pac common sof detection functions */ +#include "pac_common.h" -MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li"); +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, " + "Thomas Kaiser thomas@kaiser-linux.li"); MODULE_DESCRIPTION("Pixart PAC7302"); MODULE_LICENSE("GPL"); +enum e_ctrl { + BRIGHTNESS, + CONTRAST, + COLORS, + WHITE_BALANCE, + RED_BALANCE, + BLUE_BALANCE, + GAIN, + AUTOGAIN, + EXPOSURE, + VFLIP, + HFLIP, + NCTRLS /* number of controls */ +}; + /* specific webcam descriptor for pac7302 */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - unsigned char brightness; - unsigned char contrast; - unsigned char colors; - unsigned char white_balance; - unsigned char red_balance; - unsigned char blue_balance; - unsigned char gain; - unsigned char autogain; - unsigned short exposure; - __u8 hflip; - __u8 vflip; + struct gspca_ctrl ctrls[NCTRLS]; + u8 flags; #define FL_HFLIP 0x01 /* mirrored by default */ #define FL_VFLIP 0x02 /* vertical flipped by default */ u8 sof_read; - u8 autogain_ignore_frames; + s8 autogain_ignore_frames; atomic_t avg_lum; }; /* V4L2 controls supported by the driver */ -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); +static void setbrightcont(struct gspca_dev *gspca_dev); +static void setcolors(struct gspca_dev *gspca_dev); +static void setwhitebalance(struct gspca_dev *gspca_dev); +static void setredbalance(struct gspca_dev *gspca_dev); +static void setbluebalance(struct gspca_dev *gspca_dev); +static void setgain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); +static void setautogain(struct gspca_dev *gspca_dev); +static void sethvflip(struct gspca_dev *gspca_dev); static const struct ctrl sd_ctrls[] = { - { +[BRIGHTNESS] = { { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -132,13 +126,11 @@ static const struct ctrl sd_ctrls[] = { #define BRIGHTNESS_MAX 0x20 .maximum = BRIGHTNESS_MAX, .step = 1, -#define BRIGHTNESS_DEF 0x10 - .default_value = BRIGHTNESS_DEF, + .default_value = 0x10, }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set_control = setbrightcont }, - { +[CONTRAST] = { { .id = V4L2_CID_CONTRAST, .type = V4L2_CTRL_TYPE_INTEGER, @@ -147,13 +139,11 @@ static const struct ctrl sd_ctrls[] = { #define CONTRAST_MAX 255 .maximum = CONTRAST_MAX, .step = 1, -#define CONTRAST_DEF 127 - .default_value = CONTRAST_DEF, + .default_value = 127, }, - .set = sd_setcontrast, - .get = sd_getcontrast, + .set_control = setbrightcont }, - { +[COLORS] = { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, @@ -162,13 +152,11 @@ static const struct ctrl sd_ctrls[] = { #define COLOR_MAX 255 .maximum = COLOR_MAX, .step = 1, -#define COLOR_DEF 127 - .default_value = COLOR_DEF, + .default_value = 127 }, - .set = sd_setcolors, - .get = sd_getcolors, + .set_control = setcolors }, - { +[WHITE_BALANCE] = { { .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -176,13 +164,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define WHITEBALANCE_DEF 4 - .default_value = WHITEBALANCE_DEF, + .default_value = 4, }, - .set = sd_setwhitebalance, - .get = sd_getwhitebalance, + .set_control = setwhitebalance }, - { +[RED_BALANCE] = { { .id = V4L2_CID_RED_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -190,13 +176,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 3, .step = 1, -#define REDBALANCE_DEF 1 - .default_value = REDBALANCE_DEF, + .default_value = 1, }, - .set = sd_setredbalance, - .get = sd_getredbalance, + .set_control = setredbalance }, - { +[BLUE_BALANCE] = { { .id = V4L2_CID_BLUE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -204,29 +188,25 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 3, .step = 1, -#define BLUEBALANCE_DEF 1 - .default_value = BLUEBALANCE_DEF, + .default_value = 1, }, - .set = sd_setbluebalance, - .get = sd_getbluebalance, + .set_control = setbluebalance }, - { +[GAIN] = { { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Gain", .minimum = 0, -#define GAIN_MAX 255 - .maximum = GAIN_MAX, + .maximum = 255, .step = 1, #define GAIN_DEF 127 #define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */ .default_value = GAIN_DEF, }, - .set = sd_setgain, - .get = sd_getgain, + .set_control = setgain }, - { +[EXPOSURE] = { { .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -238,10 +218,9 @@ static const struct ctrl sd_ctrls[] = { #define EXPOSURE_KNEE 133 /* 66 ms / 15 fps */ .default_value = EXPOSURE_DEF, }, - .set = sd_setexposure, - .get = sd_getexposure, + .set_control = setexposure }, - { +[AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -252,10 +231,9 @@ static const struct ctrl sd_ctrls[] = { #define AUTOGAIN_DEF 1 .default_value = AUTOGAIN_DEF, }, - .set = sd_setautogain, - .get = sd_getautogain, + .set_control = setautogain, }, - { +[HFLIP] = { { .id = V4L2_CID_HFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -263,13 +241,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define HFLIP_DEF 0 - .default_value = HFLIP_DEF, + .default_value = 0, }, - .set = sd_sethflip, - .get = sd_gethflip, + .set_control = sethvflip, }, - { +[VFLIP] = { { .id = V4L2_CID_VFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -277,11 +253,9 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 - .default_value = VFLIP_DEF, + .default_value = 0, }, - .set = sd_setvflip, - .get = sd_getvflip, + .set_control = sethvflip }, }; @@ -290,21 +264,21 @@ static const struct v4l2_pix_format vga_mode[] = { .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, - .priv = 0}, + }, }; #define LOAD_PAGE3 255 #define END_OF_SEQUENCE 0 /* pac 7302 */ -static const __u8 init_7302[] = { +static const u8 init_7302[] = { /* index,value */ 0xff, 0x01, /* page 1 */ 0x78, 0x00, /* deactivate */ 0xff, 0x01, 0x78, 0x40, /* led off */ }; -static const __u8 start_7302[] = { +static const u8 start_7302[] = { /* index, len, [value]* */ 0xff, 1, 0x00, /* page 0 */ 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80, @@ -319,7 +293,7 @@ static const __u8 start_7302[] = { 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11, 0x00, 0x54, 0x11, 0x55, 1, 0x00, - 0x62, 4, 0x10, 0x1e, 0x1e, 0x18, + 0x62, 4, 0x10, 0x1e, 0x1e, 0x18, 0x6b, 1, 0x00, 0x6e, 3, 0x08, 0x06, 0x00, 0x72, 3, 0x00, 0xff, 0x00, @@ -370,7 +344,7 @@ static const __u8 start_7302[] = { #define SKIP 0xaa /* page 3 - the value SKIP says skip the index - see reg_w_page() */ -static const __u8 page3_7302[] = { +static const u8 page3_7302[] = { 0x90, 0x40, 0x03, 0x00, 0xc0, 0x01, 0x14, 0x16, 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00, 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -394,7 +368,7 @@ static const __u8 page3_7302[] = { }; static void reg_w_buf(struct gspca_dev *gspca_dev, - __u8 index, + u8 index, const u8 *buffer, int len) { int ret; @@ -410,7 +384,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, index, gspca_dev->usb_buf, len, 500); if (ret < 0) { - pr_err("reg_w_buf failed index 0x%02x, error %d\n", + pr_err("reg_w_buf failed i: %02x error %d\n", index, ret); gspca_dev->usb_err = ret; } @@ -418,8 +392,8 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, static void reg_w(struct gspca_dev *gspca_dev, - __u8 index, - __u8 value) + u8 index, + u8 value) { int ret; @@ -433,14 +407,14 @@ static void reg_w(struct gspca_dev *gspca_dev, 0, index, gspca_dev->usb_buf, 1, 500); if (ret < 0) { - pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n", + pr_err("reg_w() failed i: %02x v: %02x error %d\n", index, value, ret); gspca_dev->usb_err = ret; } } static void reg_w_seq(struct gspca_dev *gspca_dev, - const __u8 *seq, int len) + const u8 *seq, int len) { while (--len >= 0) { reg_w(gspca_dev, seq[0], seq[1]); @@ -450,7 +424,7 @@ static void reg_w_seq(struct gspca_dev *gspca_dev, /* load the beginning of a page */ static void reg_w_page(struct gspca_dev *gspca_dev, - const __u8 *page, int len) + const u8 *page, int len) { int index; int ret = 0; @@ -468,7 +442,7 @@ static void reg_w_page(struct gspca_dev *gspca_dev, 0, index, gspca_dev->usb_buf, 1, 500); if (ret < 0) { - pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n", + pr_err("reg_w_page() failed i: %02x v: %02x error %d\n", index, page[index], ret); gspca_dev->usb_err = ret; break; @@ -478,8 +452,8 @@ static void reg_w_page(struct gspca_dev *gspca_dev, /* output a variable sequence */ static void reg_w_var(struct gspca_dev *gspca_dev, - const __u8 *seq, - const __u8 *page3, unsigned int page3_len) + const u8 *seq, + const u8 *page3, unsigned int page3_len) { int index, len; @@ -493,11 +467,13 @@ static void reg_w_var(struct gspca_dev *gspca_dev, reg_w_page(gspca_dev, page3, page3_len); break; default: +#ifdef GSPCA_DEBUG if (len > USB_BUF_SZ) { PDEBUG(D_ERR|D_STREAM, "Incorrect variable sequence"); return; } +#endif while (len > 0) { if (len < 8) { reg_w_buf(gspca_dev, @@ -524,21 +500,11 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; - PDEBUG(D_CONF, "Find Sensor PAC7302"); cam->cam_mode = vga_mode; /* only 640x480 */ cam->nmodes = ARRAY_SIZE(vga_mode); - sd->brightness = BRIGHTNESS_DEF; - sd->contrast = CONTRAST_DEF; - sd->colors = COLOR_DEF; - sd->white_balance = WHITEBALANCE_DEF; - sd->red_balance = REDBALANCE_DEF; - sd->blue_balance = BLUEBALANCE_DEF; - sd->gain = GAIN_DEF; - sd->exposure = EXPOSURE_DEF; - sd->autogain = AUTOGAIN_DEF; - sd->hflip = HFLIP_DEF; - sd->vflip = VFLIP_DEF; + gspca_dev->cam.ctrls = sd->ctrls; + sd->flags = id->driver_info; return 0; } @@ -548,19 +514,19 @@ static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i, v; - static const __u8 max[10] = + static const u8 max[10] = {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb, 0xd4, 0xec}; - static const __u8 delta[10] = + static const u8 delta[10] = {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17, 0x11, 0x0b}; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ for (i = 0; i < 10; i++) { v = max[i]; - v += (sd->brightness - BRIGHTNESS_MAX) + v += (sd->ctrls[BRIGHTNESS].val - BRIGHTNESS_MAX) * 150 / BRIGHTNESS_MAX; /* 200 ? */ - v -= delta[i] * sd->contrast / CONTRAST_MAX; + v -= delta[i] * sd->ctrls[CONTRAST].val / CONTRAST_MAX; if (v < 0) v = 0; else if (v > 0xff) @@ -584,12 +550,11 @@ static void setcolors(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x11, 0x01); reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ for (i = 0; i < 9; i++) { - v = a[i] * sd->colors / COLOR_MAX + b[i]; + v = a[i] * sd->ctrls[COLORS].val / COLOR_MAX + b[i]; reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); reg_w(gspca_dev, 0x0f + 2 * i + 1, v); } reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); } static void setwhitebalance(struct gspca_dev *gspca_dev) @@ -597,10 +562,9 @@ static void setwhitebalance(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xc6, sd->white_balance); + reg_w(gspca_dev, 0xc6, sd->ctrls[WHITE_BALANCE].val); reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "white_balance: %i", sd->white_balance); } static void setredbalance(struct gspca_dev *gspca_dev) @@ -608,10 +572,9 @@ static void setredbalance(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xc5, sd->red_balance); + reg_w(gspca_dev, 0xc5, sd->ctrls[RED_BALANCE].val); reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "red_balance: %i", sd->red_balance); } static void setbluebalance(struct gspca_dev *gspca_dev) @@ -619,10 +582,9 @@ static void setbluebalance(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xc7, sd->blue_balance); + reg_w(gspca_dev, 0xc7, sd->ctrls[BLUE_BALANCE].val); reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "blue_balance: %i", sd->blue_balance); } static void setgain(struct gspca_dev *gspca_dev) @@ -630,7 +592,7 @@ static void setgain(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - reg_w(gspca_dev, 0x10, sd->gain >> 3); + reg_w(gspca_dev, 0x10, sd->ctrls[GAIN].val >> 3); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); @@ -639,13 +601,13 @@ static void setgain(struct gspca_dev *gspca_dev) static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 clockdiv; - __u16 exposure; + u8 clockdiv; + u16 exposure; /* register 2 of frame 3 contains the clock divider configuring the no fps according to the formula: 90 / reg. sd->exposure is the desired exposure time in 0.5 ms. */ - clockdiv = (90 * sd->exposure + 1999) / 2000; + clockdiv = (90 * sd->ctrls[EXPOSURE].val + 1999) / 2000; /* Note clockdiv = 3 also works, but when running at 30 fps, depending on the scene being recorded, the camera switches to another @@ -664,7 +626,7 @@ static void setexposure(struct gspca_dev *gspca_dev) /* frame exposure time in ms = 1000 * clockdiv / 90 -> exposure = (sd->exposure / 2) * 448 / (1000 * clockdiv / 90) */ - exposure = (sd->exposure * 45 * 448) / (1000 * clockdiv); + exposure = (sd->ctrls[EXPOSURE].val * 45 * 448) / (1000 * clockdiv); /* 0 = use full frametime, 448 = no exposure, reverse it */ exposure = 448 - exposure; @@ -677,15 +639,35 @@ static void setexposure(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x11, 0x01); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* when switching to autogain set defaults to make sure + we are on a valid point of the autogain gain / + exposure knee graph, and give this change time to + take effect before doing autogain. */ + if (sd->ctrls[AUTOGAIN].val) { + sd->ctrls[EXPOSURE].val = EXPOSURE_DEF; + sd->ctrls[GAIN].val = GAIN_DEF; + sd->autogain_ignore_frames = + PAC_AUTOGAIN_IGNORE_FRAMES; + } else { + sd->autogain_ignore_frames = -1; + } + setexposure(gspca_dev); + setgain(gspca_dev); +} + static void sethvflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 data, hflip, vflip; - hflip = sd->hflip; + hflip = sd->ctrls[HFLIP].val; if (sd->flags & FL_HFLIP) hflip = !hflip; - vflip = sd->vflip; + vflip = sd->ctrls[VFLIP].val; if (sd->flags & FL_VFLIP) vflip = !vflip; @@ -708,8 +690,6 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - sd->sof_read = 0; - reg_w_var(gspca_dev, start_7302, page3_7302, sizeof(page3_7302)); setbrightcont(gspca_dev); @@ -717,15 +697,13 @@ static int sd_start(struct gspca_dev *gspca_dev) setwhitebalance(gspca_dev); setredbalance(gspca_dev); setbluebalance(gspca_dev); - setgain(gspca_dev); - setexposure(gspca_dev); + setautogain(gspca_dev); sethvflip(gspca_dev); /* only resolution 640x480 is supported for pac7302 */ sd->sof_read = 0; - sd->autogain_ignore_frames = 0; - atomic_set(&sd->avg_lum, -1); + atomic_set(&sd->avg_lum, 270 + sd->ctrls[BRIGHTNESS].val); /* start stream */ reg_w(gspca_dev, 0xff, 0x01); @@ -751,8 +729,10 @@ static void sd_stop0(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x40); } -/* Include pac common sof detection functions */ -#include "pac_common.h" +/* !! coarse_grained_expo_autogain is not used !! */ +#define exp_too_low_cnt flags +#define exp_too_high_cnt sof_read +#include "autogain_functions.h" static void do_autogain(struct gspca_dev *gspca_dev) { @@ -761,65 +741,44 @@ static void do_autogain(struct gspca_dev *gspca_dev) int desired_lum; const int deadzone = 30; - if (avg_lum == -1) + if (sd->autogain_ignore_frames < 0) return; - desired_lum = 270 + sd->brightness; - - if (sd->autogain_ignore_frames > 0) + if (sd->autogain_ignore_frames > 0) { sd->autogain_ignore_frames--; - else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, - deadzone, GAIN_KNEE, EXPOSURE_KNEE)) + } else { + desired_lum = 270 + sd->ctrls[BRIGHTNESS].val; + + auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, + deadzone, GAIN_KNEE, EXPOSURE_KNEE); sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; + } } -/* JPEG header, part 1 */ -static const unsigned char pac_jpeg_header1[] = { - 0xff, 0xd8, /* SOI: Start of Image */ - - 0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */ - 0x00, 0x11, /* length = 17 bytes (including this length field) */ - 0x08 /* Precision: 8 */ - /* 2 bytes is placed here: number of image lines */ - /* 2 bytes is placed here: samples per line */ -}; - -/* JPEG header, continued */ -static const unsigned char pac_jpeg_header2[] = { - 0x03, /* Number of image components: 3 */ - 0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */ - 0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */ - 0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */ - - 0xff, 0xda, /* SOS: Start Of Scan */ - 0x00, 0x0c, /* length = 12 bytes (including this length field) */ - 0x03, /* number of components: 3 */ - 0x01, 0x00, /* selector 1, table 0x00 */ - 0x02, 0x11, /* selector 2, table 0x11 */ - 0x03, 0x11, /* selector 3, table 0x11 */ - 0x00, 0x3f, /* Spectral selection: 0 .. 63 */ - 0x00 /* Successive approximation: 0 */ +/* JPEG header */ +static const u8 jpeg_header[] = { + 0xff, 0xd8, /* SOI: Start of Image */ + + 0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */ + 0x00, 0x11, /* length = 17 bytes (including this length field) */ + 0x08, /* Precision: 8 */ + 0x02, 0x80, /* height = 640 (image rotated) */ + 0x01, 0xe0, /* width = 480 */ + 0x03, /* Number of image components: 3 */ + 0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */ + 0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */ + 0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */ + + 0xff, 0xda, /* SOS: Start Of Scan */ + 0x00, 0x0c, /* length = 12 bytes (including this length field) */ + 0x03, /* number of components: 3 */ + 0x01, 0x00, /* selector 1, table 0x00 */ + 0x02, 0x11, /* selector 2, table 0x11 */ + 0x03, 0x11, /* selector 3, table 0x11 */ + 0x00, 0x3f, /* Spectral selection: 0 .. 63 */ + 0x00 /* Successive approximation: 0 */ }; -static void pac_start_frame(struct gspca_dev *gspca_dev, - __u16 lines, __u16 samples_per_line) -{ - unsigned char tmpbuf[4]; - - gspca_frame_add(gspca_dev, FIRST_PACKET, - pac_jpeg_header1, sizeof(pac_jpeg_header1)); - - tmpbuf[0] = lines >> 8; - tmpbuf[1] = lines & 0xff; - tmpbuf[2] = samples_per_line >> 8; - tmpbuf[3] = samples_per_line & 0xff; - - gspca_frame_add(gspca_dev, INTER_PACKET, - tmpbuf, sizeof(tmpbuf)); - gspca_frame_add(gspca_dev, INTER_PACKET, - pac_jpeg_header2, sizeof(pac_jpeg_header2)); -} - /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ @@ -827,7 +786,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, { struct sd *sd = (struct sd *) gspca_dev; u8 *image; - unsigned char *sof; + u8 *sof; sof = pac_find_sof(&sd->sof_read, data, len); if (sof) { @@ -864,234 +823,21 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, n >= lum_offset) atomic_set(&sd->avg_lum, data[-lum_offset] + data[-lum_offset + 1]); - else - atomic_set(&sd->avg_lum, -1); /* Start the new frame with the jpeg header */ /* The PAC7302 has the image rotated 90 degrees */ - pac_start_frame(gspca_dev, - gspca_dev->width, gspca_dev->height); + gspca_frame_add(gspca_dev, FIRST_PACKET, + jpeg_header, sizeof jpeg_header); } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->brightness = val; - if (gspca_dev->streaming) - setbrightcont(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->brightness; - return 0; -} - -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->contrast = val; - if (gspca_dev->streaming) - setbrightcont(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->contrast; - return 0; -} - -static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->colors = val; - if (gspca_dev->streaming) - setcolors(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->colors; - return 0; -} - -static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->white_balance = val; - if (gspca_dev->streaming) - setwhitebalance(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->white_balance; - return 0; -} - -static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->red_balance = val; - if (gspca_dev->streaming) - setredbalance(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->red_balance; - return 0; -} - -static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->blue_balance = val; - if (gspca_dev->streaming) - setbluebalance(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->blue_balance; - return 0; -} - -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gain = val; - if (gspca_dev->streaming) - setgain(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->gain; - return 0; -} - -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->exposure = val; - if (gspca_dev->streaming) - setexposure(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->exposure; - return 0; -} - -static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->autogain = val; - /* when switching to autogain set defaults to make sure - we are on a valid point of the autogain gain / - exposure knee graph, and give this change time to - take effect before doing autogain. */ - if (sd->autogain) { - sd->exposure = EXPOSURE_DEF; - sd->gain = GAIN_DEF; - if (gspca_dev->streaming) { - sd->autogain_ignore_frames = - PAC_AUTOGAIN_IGNORE_FRAMES; - setexposure(gspca_dev); - setgain(gspca_dev); - } - } - - return gspca_dev->usb_err; -} - -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->autogain; - return 0; -} - -static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hflip = val; - if (gspca_dev->streaming) - sethvflip(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->hflip; - return 0; -} - -static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->vflip = val; - if (gspca_dev->streaming) - sethvflip(gspca_dev); - return gspca_dev->usb_err; -} - -static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->vflip; - return 0; -} - #ifdef CONFIG_VIDEO_ADV_DEBUG static int sd_dbg_s_register(struct gspca_dev *gspca_dev, struct v4l2_dbg_register *reg) { - __u8 index; - __u8 value; + u8 index; + u8 value; /* reg->reg: bit0..15: reserved for register index (wIndex is 16bit long on the USB bus) @@ -1103,8 +849,8 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, ) { /* Currently writing to page 0 is only supported. */ /* reg_w() only supports 8bit index */ - index = reg->reg & 0x000000ff; - value = reg->val & 0x000000ff; + index = reg->reg; + value = reg->val; /* Note that there shall be no access to other page by any other function between the page swith and @@ -1165,7 +911,7 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, /* sub-driver description for pac7302 */ static const struct sd_desc sd_desc = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, @@ -1187,6 +933,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3009)}, + {USB_DEVICE(0x06f8, 0x301b)}, {USB_DEVICE(0x093a, 0x2620)}, {USB_DEVICE(0x093a, 0x2621)}, {USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP}, @@ -1211,7 +958,7 @@ static int sd_probe(struct usb_interface *intf, } static struct usb_driver sd_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 9e198b45c3c8..7e71aa2d2522 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -1,5 +1,7 @@ /* * Sonix sn9c201 sn9c202 library + * + * Copyright (C) 2012 Jean-Francois Moine <http://moinejf.free.fr> * Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com> * Copyright (C) 2009 Brian Johnson <brijohn@gmail.com> * @@ -33,8 +35,6 @@ MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, " MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver"); MODULE_LICENSE("GPL"); -#define MODULE_NAME "sn9c20x" - /* * Pixel format private data */ @@ -66,10 +66,37 @@ MODULE_LICENSE("GPL"); #define LED_REVERSE 0x2 /* some cameras unset gpio to turn on leds */ #define FLIP_DETECT 0x4 +enum e_ctrl { + BRIGHTNESS, + CONTRAST, + SATURATION, + HUE, + GAMMA, + BLUE, + RED, + VFLIP, + HFLIP, + EXPOSURE, + GAIN, + AUTOGAIN, + QUALITY, + NCTRLS /* number of controls */ +}; + /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; + struct gspca_ctrl ctrls[NCTRLS]; + + struct work_struct work; + struct workqueue_struct *work_thread; + + u32 pktsz; /* (used by pkt_scan) */ + u16 npkt; + s8 nchg; + u8 fmt; /* (used for JPEG QTAB update */ + #define MIN_AVG_LUM 80 #define MAX_AVG_LUM 130 atomic_t avg_lum; @@ -77,31 +104,18 @@ struct sd { u8 older_step; u8 exposure_step; - u8 brightness; - u8 contrast; - u8 saturation; - s16 hue; - u8 gamma; - u8 red; - u8 blue; - - u8 hflip; - u8 vflip; - u8 gain; - u16 exposure; - u8 auto_exposure; - u8 i2c_addr; u8 sensor; u8 hstart; u8 vstart; u8 jpeg_hdr[JPEG_HDR_SZ]; - u8 quality; u8 flags; }; +static void qual_upd(struct work_struct *work); + struct i2c_reg_u8 { u8 reg; u8 val; @@ -112,31 +126,6 @@ struct i2c_reg_u16 { u16 val; }; -static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val); -static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val); -static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val); -static int sd_sethue(struct gspca_dev *gspca_dev, s32 val); -static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val); -static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val); -static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val); -static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val); -static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val); -static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val); -static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setgain(struct gspca_dev *gspca_dev, s32 val); -static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val); -static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val); -static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val); -static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val); - static const struct dmi_system_id flip_dmi_table[] = { { .ident = "MSI MS-1034", @@ -177,9 +166,16 @@ static const struct dmi_system_id flip_dmi_table[] = { {} }; -static const struct ctrl sd_ctrls[] = { - { -#define BRIGHTNESS_IDX 0 +static void set_cmatrix(struct gspca_dev *gspca_dev); +static void set_gamma(struct gspca_dev *gspca_dev); +static void set_redblue(struct gspca_dev *gspca_dev); +static void set_hvflip(struct gspca_dev *gspca_dev); +static void set_exposure(struct gspca_dev *gspca_dev); +static void set_gain(struct gspca_dev *gspca_dev); +static void set_quality(struct gspca_dev *gspca_dev); + +static const struct ctrl sd_ctrls[NCTRLS] = { +[BRIGHTNESS] = { { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -187,14 +183,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define BRIGHTNESS_DEFAULT 0x7f - .default_value = BRIGHTNESS_DEFAULT, + .default_value = 0x7f }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set_control = set_cmatrix }, - { -#define CONTRAST_IDX 1 +[CONTRAST] = { { .id = V4L2_CID_CONTRAST, .type = V4L2_CTRL_TYPE_INTEGER, @@ -202,14 +195,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define CONTRAST_DEFAULT 0x7f - .default_value = CONTRAST_DEFAULT, + .default_value = 0x7f }, - .set = sd_setcontrast, - .get = sd_getcontrast, + .set_control = set_cmatrix }, - { -#define SATURATION_IDX 2 +[SATURATION] = { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, @@ -217,14 +207,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define SATURATION_DEFAULT 0x7f - .default_value = SATURATION_DEFAULT, + .default_value = 0x7f }, - .set = sd_setsaturation, - .get = sd_getsaturation, + .set_control = set_cmatrix }, - { -#define HUE_IDX 3 +[HUE] = { { .id = V4L2_CID_HUE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -232,14 +219,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = -180, .maximum = 180, .step = 1, -#define HUE_DEFAULT 0 - .default_value = HUE_DEFAULT, + .default_value = 0 }, - .set = sd_sethue, - .get = sd_gethue, + .set_control = set_cmatrix }, - { -#define GAMMA_IDX 4 +[GAMMA] = { { .id = V4L2_CID_GAMMA, .type = V4L2_CTRL_TYPE_INTEGER, @@ -247,14 +231,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0xff, .step = 1, -#define GAMMA_DEFAULT 0x10 - .default_value = GAMMA_DEFAULT, + .default_value = 0x10 }, - .set = sd_setgamma, - .get = sd_getgamma, + .set_control = set_gamma }, - { -#define BLUE_IDX 5 +[BLUE] = { { .id = V4L2_CID_BLUE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -262,14 +243,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x7f, .step = 1, -#define BLUE_DEFAULT 0x28 - .default_value = BLUE_DEFAULT, + .default_value = 0x28 }, - .set = sd_setbluebalance, - .get = sd_getbluebalance, + .set_control = set_redblue }, - { -#define RED_IDX 6 +[RED] = { { .id = V4L2_CID_RED_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -277,14 +255,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x7f, .step = 1, -#define RED_DEFAULT 0x28 - .default_value = RED_DEFAULT, + .default_value = 0x28 }, - .set = sd_setredbalance, - .get = sd_getredbalance, + .set_control = set_redblue }, - { -#define HFLIP_IDX 7 +[HFLIP] = { { .id = V4L2_CID_HFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -292,14 +267,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define HFLIP_DEFAULT 0 - .default_value = HFLIP_DEFAULT, + .default_value = 0, }, - .set = sd_sethflip, - .get = sd_gethflip, + .set_control = set_hvflip }, - { -#define VFLIP_IDX 8 +[VFLIP] = { { .id = V4L2_CID_VFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -307,14 +279,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEFAULT 0 - .default_value = VFLIP_DEFAULT, + .default_value = 0, }, - .set = sd_setvflip, - .get = sd_getvflip, + .set_control = set_hvflip }, - { -#define EXPOSURE_IDX 9 +[EXPOSURE] = { { .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -322,14 +291,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x1780, .step = 1, -#define EXPOSURE_DEFAULT 0x33 - .default_value = EXPOSURE_DEFAULT, + .default_value = 0x33, }, - .set = sd_setexposure, - .get = sd_getexposure, + .set_control = set_exposure }, - { -#define GAIN_IDX 10 +[GAIN] = { { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, @@ -337,14 +303,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 28, .step = 1, -#define GAIN_DEFAULT 0x00 - .default_value = GAIN_DEFAULT, + .default_value = 0, }, - .set = sd_setgain, - .get = sd_getgain, + .set_control = set_gain }, - { -#define AUTOGAIN_IDX 11 +[AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -352,11 +315,23 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define AUTO_EXPOSURE_DEFAULT 1 - .default_value = AUTO_EXPOSURE_DEFAULT, + .default_value = 1, + }, + }, +[QUALITY] = { + { + .id = V4L2_CID_JPEG_COMPRESSION_QUALITY, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Compression Quality", +#define QUALITY_MIN 50 +#define QUALITY_MAX 90 +#define QUALITY_DEF 80 + .minimum = QUALITY_MIN, + .maximum = QUALITY_MAX, + .step = 1, + .default_value = QUALITY_DEF, }, - .set = sd_setautoexposure, - .get = sd_getautoexposure, + .set_control = set_quality }, }; @@ -876,7 +851,7 @@ static u8 hv7131r_gain[] = { }; static struct i2c_reg_u8 soi968_init[] = { - {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f}, + {0x0c, 0x00}, {0x0f, 0x1f}, {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00}, {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c}, {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff}, @@ -902,7 +877,7 @@ static struct i2c_reg_u8 ov7660_init[] = { }; static struct i2c_reg_u8 ov7670_init[] = { - {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01}, + {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01}, {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00}, {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0}, {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00}, @@ -959,7 +934,7 @@ static struct i2c_reg_u8 ov7670_init[] = { }; static struct i2c_reg_u8 ov9650_init[] = { - {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78}, + {0x00, 0x00}, {0x01, 0x78}, {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03}, {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00}, {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00}, @@ -989,7 +964,7 @@ static struct i2c_reg_u8 ov9650_init[] = { }; static struct i2c_reg_u8 ov9655_init[] = { - {0x12, 0x80}, {0x0e, 0x61}, {0x11, 0x80}, {0x13, 0xba}, + {0x0e, 0x61}, {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24}, {0x1e, 0x04}, {0x27, 0x08}, {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x34, 0x3d}, {0x35, 0x00}, {0x38, 0x12}, {0x0f, 0x42}, {0x39, 0x57}, @@ -1112,10 +1087,13 @@ static struct i2c_reg_u8 hv7131r_init[] = { {0x23, 0x09}, {0x01, 0x08}, }; -static int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) +static void reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) { struct usb_device *dev = gspca_dev->dev; int result; + + if (gspca_dev->usb_err < 0) + return; result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x00, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, @@ -1125,17 +1103,19 @@ static int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) length, 500); if (unlikely(result < 0 || result != length)) { - pr_err("Read register failed 0x%02X\n", reg); - return -EIO; + pr_err("Read register %02x failed %d\n", reg, result); + gspca_dev->usb_err = result; } - return 0; } -static int reg_w(struct gspca_dev *gspca_dev, u16 reg, +static void reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length) { struct usb_device *dev = gspca_dev->dev; int result; + + if (gspca_dev->usb_err < 0) + return; memcpy(gspca_dev->usb_buf, buffer, length); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0x08, @@ -1146,38 +1126,41 @@ static int reg_w(struct gspca_dev *gspca_dev, u16 reg, length, 500); if (unlikely(result < 0 || result != length)) { - pr_err("Write register failed index 0x%02X\n", reg); - return -EIO; + pr_err("Write register %02x failed %d\n", reg, result); + gspca_dev->usb_err = result; } - return 0; } -static int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value) +static void reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value) { - u8 data[1] = {value}; - return reg_w(gspca_dev, reg, data, 1); + reg_w(gspca_dev, reg, &value, 1); } -static int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer) +static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer) { int i; + reg_w(gspca_dev, 0x10c0, buffer, 8); for (i = 0; i < 5; i++) { reg_r(gspca_dev, 0x10c0, 1); + if (gspca_dev->usb_err < 0) + return; if (gspca_dev->usb_buf[0] & 0x04) { - if (gspca_dev->usb_buf[0] & 0x08) - return -EIO; - return 0; + if (gspca_dev->usb_buf[0] & 0x08) { + pr_err("i2c_w error\n"); + gspca_dev->usb_err = -EIO; + } + return; } - msleep(1); + msleep(10); } - return -EIO; + pr_err("i2c_w reg %02x no response\n", buffer[2]); +/* gspca_dev->usb_err = -EIO; fixme: may occur */ } -static int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) +static void i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) { struct sd *sd = (struct sd *) gspca_dev; - u8 row[8]; /* @@ -1193,10 +1176,19 @@ static int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) row[6] = 0x00; row[7] = 0x10; - return i2c_w(gspca_dev, row); + i2c_w(gspca_dev, row); +} + +static void i2c_w1_buf(struct gspca_dev *gspca_dev, + struct i2c_reg_u8 *buf, int sz) +{ + while (--sz >= 0) { + i2c_w1(gspca_dev, buf->reg, buf->val); + buf++; + } } -static int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) +static void i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) { struct sd *sd = (struct sd *) gspca_dev; u8 row[8]; @@ -1208,16 +1200,25 @@ static int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) row[0] = 0x81 | (3 << 4); row[1] = sd->i2c_addr; row[2] = reg; - row[3] = (val >> 8) & 0xff; - row[4] = val & 0xff; + row[3] = val >> 8; + row[4] = val; row[5] = 0x00; row[6] = 0x00; row[7] = 0x10; - return i2c_w(gspca_dev, row); + i2c_w(gspca_dev, row); +} + +static void i2c_w2_buf(struct gspca_dev *gspca_dev, + struct i2c_reg_u16 *buf, int sz) +{ + while (--sz >= 0) { + i2c_w2(gspca_dev, buf->reg, buf->val); + buf++; + } } -static int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) +static void i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) { struct sd *sd = (struct sd *) gspca_dev; u8 row[8]; @@ -1230,19 +1231,15 @@ static int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) row[5] = 0; row[6] = 0; row[7] = 0x10; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; + i2c_w(gspca_dev, row); row[0] = 0x81 | (1 << 4) | 0x02; row[2] = 0; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; - if (reg_r(gspca_dev, 0x10c2, 5) < 0) - return -EIO; + i2c_w(gspca_dev, row); + reg_r(gspca_dev, 0x10c2, 5); *val = gspca_dev->usb_buf[4]; - return 0; } -static int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) +static void i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) { struct sd *sd = (struct sd *) gspca_dev; u8 row[8]; @@ -1255,233 +1252,204 @@ static int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) row[5] = 0; row[6] = 0; row[7] = 0x10; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; + i2c_w(gspca_dev, row); row[0] = 0x81 | (2 << 4) | 0x02; row[2] = 0; - if (i2c_w(gspca_dev, row) < 0) - return -EIO; - if (reg_r(gspca_dev, 0x10c2, 5) < 0) - return -EIO; + i2c_w(gspca_dev, row); + reg_r(gspca_dev, 0x10c2, 5); *val = (gspca_dev->usb_buf[3] << 8) | gspca_dev->usb_buf[4]; - return 0; } -static int ov9650_init_sensor(struct gspca_dev *gspca_dev) +static void ov9650_init_sensor(struct gspca_dev *gspca_dev) { - int i; u16 id; struct sd *sd = (struct sd *) gspca_dev; - if (i2c_r2(gspca_dev, 0x1c, &id) < 0) - return -EINVAL; + i2c_r2(gspca_dev, 0x1c, &id); + if (gspca_dev->usb_err < 0) + return; if (id != 0x7fa2) { pr_err("sensor id for ov9650 doesn't match (0x%04x)\n", id); - return -ENODEV; + gspca_dev->usb_err = -ENODEV; + return; } - for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) { - if (i2c_w1(gspca_dev, ov9650_init[i].reg, - ov9650_init[i].val) < 0) { - pr_err("OV9650 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov9650_init, ARRAY_SIZE(ov9650_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV9650 sensor initialization failed\n"); sd->hstart = 1; sd->vstart = 7; - return 0; } -static int ov9655_init_sensor(struct gspca_dev *gspca_dev) +static void ov9655_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) { - if (i2c_w1(gspca_dev, ov9655_init[i].reg, - ov9655_init[i].val) < 0) { - pr_err("OV9655 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov9655_init, ARRAY_SIZE(ov9655_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV9655 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP); sd->hstart = 1; sd->vstart = 2; - return 0; } -static int soi968_init_sensor(struct gspca_dev *gspca_dev) +static void soi968_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(soi968_init); i++) { - if (i2c_w1(gspca_dev, soi968_init[i].reg, - soi968_init[i].val) < 0) { - pr_err("SOI968 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, soi968_init, ARRAY_SIZE(soi968_init)); + if (gspca_dev->usb_err < 0) + pr_err("SOI968 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) - | (1 << EXPOSURE_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP) + | (1 << EXPOSURE); sd->hstart = 60; sd->vstart = 11; - return 0; } -static int ov7660_init_sensor(struct gspca_dev *gspca_dev) +static void ov7660_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) { - if (i2c_w1(gspca_dev, ov7660_init[i].reg, - ov7660_init[i].val) < 0) { - pr_err("OV7660 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov7660_init, ARRAY_SIZE(ov7660_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV7660 sensor initialization failed\n"); sd->hstart = 3; sd->vstart = 3; - return 0; } -static int ov7670_init_sensor(struct gspca_dev *gspca_dev) +static void ov7670_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) { - if (i2c_w1(gspca_dev, ov7670_init[i].reg, - ov7670_init[i].val) < 0) { - pr_err("OV7670 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1(gspca_dev, 0x12, 0x80); /* sensor reset */ + msleep(200); + i2c_w1_buf(gspca_dev, ov7670_init, ARRAY_SIZE(ov7670_init)); + if (gspca_dev->usb_err < 0) + pr_err("OV7670 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP); sd->hstart = 0; sd->vstart = 1; - return 0; } -static int mt9v_init_sensor(struct gspca_dev *gspca_dev) +static void mt9v_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; u16 value; - int ret; sd->i2c_addr = 0x5d; - ret = i2c_r2(gspca_dev, 0xff, &value); - if ((ret == 0) && (value == 0x8243)) { - for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) { - if (i2c_w2(gspca_dev, mt9v011_init[i].reg, - mt9v011_init[i].val) < 0) { - pr_err("MT9V011 sensor initialization failed\n"); - return -ENODEV; - } + i2c_r2(gspca_dev, 0xff, &value); + if (gspca_dev->usb_err >= 0 + && value == 0x8243) { + i2c_w2_buf(gspca_dev, mt9v011_init, ARRAY_SIZE(mt9v011_init)); + if (gspca_dev->usb_err < 0) { + pr_err("MT9V011 sensor initialization failed\n"); + return; } sd->hstart = 2; sd->vstart = 2; sd->sensor = SENSOR_MT9V011; pr_info("MT9V011 sensor detected\n"); - return 0; + return; } + gspca_dev->usb_err = 0; sd->i2c_addr = 0x5c; i2c_w2(gspca_dev, 0x01, 0x0004); - ret = i2c_r2(gspca_dev, 0xff, &value); - if ((ret == 0) && (value == 0x823a)) { - for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) { - if (i2c_w2(gspca_dev, mt9v111_init[i].reg, - mt9v111_init[i].val) < 0) { - pr_err("MT9V111 sensor initialization failed\n"); - return -ENODEV; - } + i2c_r2(gspca_dev, 0xff, &value); + if (gspca_dev->usb_err >= 0 + && value == 0x823a) { + i2c_w2_buf(gspca_dev, mt9v111_init, ARRAY_SIZE(mt9v111_init)); + if (gspca_dev->usb_err < 0) { + pr_err("MT9V111 sensor initialization failed\n"); + return; } - gspca_dev->ctrl_dis = (1 << EXPOSURE_IDX) - | (1 << AUTOGAIN_IDX) - | (1 << GAIN_IDX); + gspca_dev->ctrl_dis = (1 << EXPOSURE) + | (1 << AUTOGAIN) + | (1 << GAIN); sd->hstart = 2; sd->vstart = 2; sd->sensor = SENSOR_MT9V111; pr_info("MT9V111 sensor detected\n"); - return 0; + return; } + gspca_dev->usb_err = 0; sd->i2c_addr = 0x5d; - ret = i2c_w2(gspca_dev, 0xf0, 0x0000); - if (ret < 0) { + i2c_w2(gspca_dev, 0xf0, 0x0000); + if (gspca_dev->usb_err < 0) { + gspca_dev->usb_err = 0; sd->i2c_addr = 0x48; i2c_w2(gspca_dev, 0xf0, 0x0000); } - ret = i2c_r2(gspca_dev, 0x00, &value); - if ((ret == 0) && (value == 0x1229)) { - for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) { - if (i2c_w2(gspca_dev, mt9v112_init[i].reg, - mt9v112_init[i].val) < 0) { - pr_err("MT9V112 sensor initialization failed\n"); - return -ENODEV; - } + i2c_r2(gspca_dev, 0x00, &value); + if (gspca_dev->usb_err >= 0 + && value == 0x1229) { + i2c_w2_buf(gspca_dev, mt9v112_init, ARRAY_SIZE(mt9v112_init)); + if (gspca_dev->usb_err < 0) { + pr_err("MT9V112 sensor initialization failed\n"); + return; } sd->hstart = 6; sd->vstart = 2; sd->sensor = SENSOR_MT9V112; pr_info("MT9V112 sensor detected\n"); - return 0; + return; } - return -ENODEV; + gspca_dev->usb_err = -ENODEV; } -static int mt9m112_init_sensor(struct gspca_dev *gspca_dev) +static void mt9m112_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; - for (i = 0; i < ARRAY_SIZE(mt9m112_init); i++) { - if (i2c_w2(gspca_dev, mt9m112_init[i].reg, - mt9m112_init[i].val) < 0) { - pr_err("MT9M112 sensor initialization failed\n"); - return -ENODEV; - } - } - gspca_dev->ctrl_dis = (1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX) - | (1 << GAIN_IDX); + + i2c_w2_buf(gspca_dev, mt9m112_init, ARRAY_SIZE(mt9m112_init)); + if (gspca_dev->usb_err < 0) + pr_err("MT9M112 sensor initialization failed\n"); + + gspca_dev->ctrl_dis = (1 << EXPOSURE) | (1 << AUTOGAIN) + | (1 << GAIN); sd->hstart = 0; sd->vstart = 2; - return 0; } -static int mt9m111_init_sensor(struct gspca_dev *gspca_dev) +static void mt9m111_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; - for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) { - if (i2c_w2(gspca_dev, mt9m111_init[i].reg, - mt9m111_init[i].val) < 0) { - pr_err("MT9M111 sensor initialization failed\n"); - return -ENODEV; - } - } - gspca_dev->ctrl_dis = (1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX) - | (1 << GAIN_IDX); + + i2c_w2_buf(gspca_dev, mt9m111_init, ARRAY_SIZE(mt9m111_init)); + if (gspca_dev->usb_err < 0) + pr_err("MT9M111 sensor initialization failed\n"); + + gspca_dev->ctrl_dis = (1 << EXPOSURE) | (1 << AUTOGAIN) + | (1 << GAIN); sd->hstart = 0; sd->vstart = 2; - return 0; } -static int mt9m001_init_sensor(struct gspca_dev *gspca_dev) +static void mt9m001_init_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i; u16 id; - if (i2c_r2(gspca_dev, 0x00, &id) < 0) - return -EINVAL; + i2c_r2(gspca_dev, 0x00, &id); + if (gspca_dev->usb_err < 0) + return; /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ switch (id) { @@ -1494,85 +1462,78 @@ static int mt9m001_init_sensor(struct gspca_dev *gspca_dev) break; default: pr_err("No MT9M001 chip detected, ID = %x\n\n", id); - return -ENODEV; + gspca_dev->usb_err = -ENODEV; + return; } - for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) { - if (i2c_w2(gspca_dev, mt9m001_init[i].reg, - mt9m001_init[i].val) < 0) { - pr_err("MT9M001 sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w2_buf(gspca_dev, mt9m001_init, ARRAY_SIZE(mt9m001_init)); + if (gspca_dev->usb_err < 0) + pr_err("MT9M001 sensor initialization failed\n"); + /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP); sd->hstart = 1; sd->vstart = 1; - return 0; } -static int hv7131r_init_sensor(struct gspca_dev *gspca_dev) +static void hv7131r_init_sensor(struct gspca_dev *gspca_dev) { - int i; struct sd *sd = (struct sd *) gspca_dev; - for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) { - if (i2c_w1(gspca_dev, hv7131r_init[i].reg, - hv7131r_init[i].val) < 0) { - pr_err("HV7131R Sensor initialization failed\n"); - return -ENODEV; - } - } + i2c_w1_buf(gspca_dev, hv7131r_init, ARRAY_SIZE(hv7131r_init)); + if (gspca_dev->usb_err < 0) + pr_err("HV7131R Sensor initialization failed\n"); + sd->hstart = 0; sd->vstart = 1; - return 0; } -static int set_cmatrix(struct gspca_dev *gspca_dev) +static void set_cmatrix(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - s32 hue_coord, hue_index = 180 + sd->hue; + int satur; + s32 hue_coord, hue_index = 180 + sd->ctrls[HUE].val; u8 cmatrix[21]; memset(cmatrix, 0, sizeof cmatrix); - cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26; + cmatrix[2] = (sd->ctrls[CONTRAST].val * 0x25 / 0x100) + 0x26; cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25; cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25; - cmatrix[18] = sd->brightness - 0x80; + cmatrix[18] = sd->ctrls[BRIGHTNESS].val - 0x80; - hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8; + satur = sd->ctrls[SATURATION].val; + hue_coord = (hsv_red_x[hue_index] * satur) >> 8; cmatrix[6] = hue_coord; cmatrix[7] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_red_y[hue_index] * satur) >> 8; cmatrix[8] = hue_coord; cmatrix[9] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_green_x[hue_index] * satur) >> 8; cmatrix[10] = hue_coord; cmatrix[11] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_green_y[hue_index] * satur) >> 8; cmatrix[12] = hue_coord; cmatrix[13] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_blue_x[hue_index] * satur) >> 8; cmatrix[14] = hue_coord; cmatrix[15] = (hue_coord >> 8) & 0x0f; - hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8; + hue_coord = (hsv_blue_y[hue_index] * satur) >> 8; cmatrix[16] = hue_coord; cmatrix[17] = (hue_coord >> 8) & 0x0f; - return reg_w(gspca_dev, 0x10e1, cmatrix, 21); + reg_w(gspca_dev, 0x10e1, cmatrix, 21); } -static int set_gamma(struct gspca_dev *gspca_dev) +static void set_gamma(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 gamma[17]; - u8 gval = sd->gamma * 0xb8 / 0x100; - + u8 gval = sd->ctrls[GAMMA].val * 0xb8 / 0x100; gamma[0] = 0x0a; gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8); @@ -1592,29 +1553,29 @@ static int set_gamma(struct gspca_dev *gspca_dev) gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8); gamma[16] = 0xf5; - return reg_w(gspca_dev, 0x1190, gamma, 17); + reg_w(gspca_dev, 0x1190, gamma, 17); } -static int set_redblue(struct gspca_dev *gspca_dev) +static void set_redblue(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - reg_w1(gspca_dev, 0x118c, sd->red); - reg_w1(gspca_dev, 0x118f, sd->blue); - return 0; + + reg_w1(gspca_dev, 0x118c, sd->ctrls[RED].val); + reg_w1(gspca_dev, 0x118f, sd->ctrls[BLUE].val); } -static int set_hvflip(struct gspca_dev *gspca_dev) +static void set_hvflip(struct gspca_dev *gspca_dev) { u8 value, tslb, hflip, vflip; u16 value2; struct sd *sd = (struct sd *) gspca_dev; if ((sd->flags & FLIP_DETECT) && dmi_check_system(flip_dmi_table)) { - hflip = !sd->hflip; - vflip = !sd->vflip; + hflip = !sd->ctrls[HFLIP].val; + vflip = !sd->ctrls[VFLIP].val; } else { - hflip = sd->hflip; - vflip = sd->vflip; + hflip = sd->ctrls[HFLIP].val; + vflip = sd->ctrls[VFLIP].val; } switch (sd->sensor) { @@ -1625,8 +1586,9 @@ static int set_hvflip(struct gspca_dev *gspca_dev) if (vflip) { value |= 0x10; sd->vstart = 2; - } else + } else { sd->vstart = 3; + } reg_w1(gspca_dev, 0x1182, sd->vstart); i2c_w1(gspca_dev, 0x1e, value); break; @@ -1674,13 +1636,15 @@ static int set_hvflip(struct gspca_dev *gspca_dev) i2c_w1(gspca_dev, 0x01, value); break; } - return 0; } -static int set_exposure(struct gspca_dev *gspca_dev) +static void set_exposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e}; + int expo; + + expo = sd->ctrls[EXPOSURE].val; switch (sd->sensor) { case SENSOR_OV7660: case SENSOR_OV7670: @@ -1688,35 +1652,37 @@ static int set_exposure(struct gspca_dev *gspca_dev) case SENSOR_OV9650: exp[0] |= (3 << 4); exp[2] = 0x2d; - exp[3] = sd->exposure & 0xff; - exp[4] = sd->exposure >> 8; + exp[3] = expo; + exp[4] = expo >> 8; break; case SENSOR_MT9M001: case SENSOR_MT9V112: case SENSOR_MT9V011: exp[0] |= (3 << 4); exp[2] = 0x09; - exp[3] = sd->exposure >> 8; - exp[4] = sd->exposure & 0xff; + exp[3] = expo >> 8; + exp[4] = expo; break; case SENSOR_HV7131R: exp[0] |= (4 << 4); exp[2] = 0x25; - exp[3] = (sd->exposure >> 5) & 0xff; - exp[4] = (sd->exposure << 3) & 0xff; + exp[3] = expo >> 5; + exp[4] = expo << 3; exp[5] = 0; break; default: - return 0; + return; } i2c_w(gspca_dev, exp); - return 0; } -static int set_gain(struct gspca_dev *gspca_dev) +static void set_gain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d}; + int g; + + g = sd->ctrls[GAIN].val; switch (sd->sensor) { case SENSOR_OV7660: case SENSOR_OV7670: @@ -1724,238 +1690,50 @@ static int set_gain(struct gspca_dev *gspca_dev) case SENSOR_OV9655: case SENSOR_OV9650: gain[0] |= (2 << 4); - gain[3] = ov_gain[sd->gain]; + gain[3] = ov_gain[g]; break; case SENSOR_MT9V011: gain[0] |= (3 << 4); gain[2] = 0x35; - gain[3] = micron1_gain[sd->gain] >> 8; - gain[4] = micron1_gain[sd->gain] & 0xff; + gain[3] = micron1_gain[g] >> 8; + gain[4] = micron1_gain[g]; break; case SENSOR_MT9V112: gain[0] |= (3 << 4); gain[2] = 0x2f; - gain[3] = micron1_gain[sd->gain] >> 8; - gain[4] = micron1_gain[sd->gain] & 0xff; + gain[3] = micron1_gain[g] >> 8; + gain[4] = micron1_gain[g]; break; case SENSOR_MT9M001: gain[0] |= (3 << 4); gain[2] = 0x2f; - gain[3] = micron2_gain[sd->gain] >> 8; - gain[4] = micron2_gain[sd->gain] & 0xff; + gain[3] = micron2_gain[g] >> 8; + gain[4] = micron2_gain[g]; break; case SENSOR_HV7131R: gain[0] |= (2 << 4); gain[2] = 0x30; - gain[3] = hv7131r_gain[sd->gain]; + gain[3] = hv7131r_gain[g]; break; default: - return 0; + return; } i2c_w(gspca_dev, gain); - return 0; -} - -static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->brightness = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; -} - -static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->brightness; - return 0; -} - - -static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->contrast = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; -} - -static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->contrast; - return 0; -} - -static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->saturation = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; } -static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val) +static void set_quality(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->saturation; - return 0; -} - -static int sd_sethue(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hue = val; - if (gspca_dev->streaming) - return set_cmatrix(gspca_dev); - return 0; -} - -static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->hue; - return 0; -} - -static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gamma = val; - if (gspca_dev->streaming) - return set_gamma(gspca_dev); - return 0; -} - -static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->gamma; - return 0; -} - -static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->red = val; - if (gspca_dev->streaming) - return set_redblue(gspca_dev); - return 0; -} - -static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->red; - return 0; -} - -static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->blue = val; - if (gspca_dev->streaming) - return set_redblue(gspca_dev); - return 0; -} - -static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->blue; - return 0; -} - -static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hflip = val; - if (gspca_dev->streaming) - return set_hvflip(gspca_dev); - return 0; -} - -static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->hflip; - return 0; -} - -static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->vflip = val; - if (gspca_dev->streaming) - return set_hvflip(gspca_dev); - return 0; -} - -static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->vflip; - return 0; -} - -static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->exposure = val; - if (gspca_dev->streaming) - return set_exposure(gspca_dev); - return 0; -} - -static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->exposure; - return 0; -} - -static int sd_setgain(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gain = val; - if (gspca_dev->streaming) - return set_gain(gspca_dev); - return 0; -} - -static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->gain; - return 0; -} - -static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - sd->auto_exposure = val; - return 0; -} -static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - *val = sd->auto_exposure; - return 0; + jpeg_set_qual(sd->jpeg_hdr, sd->ctrls[QUALITY].val); + reg_w1(gspca_dev, 0x1061, 0x01); /* stop transfer */ + reg_w1(gspca_dev, 0x10e0, sd->fmt | 0x20); /* write QTAB */ + reg_w(gspca_dev, 0x1100, &sd->jpeg_hdr[JPEG_QT0_OFFSET], 64); + reg_w(gspca_dev, 0x1140, &sd->jpeg_hdr[JPEG_QT1_OFFSET], 64); + reg_w1(gspca_dev, 0x1061, 0x03); /* restart transfer */ + reg_w1(gspca_dev, 0x10e0, sd->fmt); + sd->fmt ^= 0x0c; /* invert QTAB use + write */ + reg_w1(gspca_dev, 0x10e0, sd->fmt); } #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -1963,28 +1741,26 @@ static int sd_dbg_g_register(struct gspca_dev *gspca_dev, struct v4l2_dbg_register *reg) { struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { case V4L2_CHIP_MATCH_HOST: if (reg->match.addr != 0) return -EINVAL; if (reg->reg < 0x1000 || reg->reg > 0x11ff) return -EINVAL; - if (reg_r(gspca_dev, reg->reg, 1) < 0) - return -EINVAL; + reg_r(gspca_dev, reg->reg, 1); reg->val = gspca_dev->usb_buf[0]; - return 0; + return gspca_dev->usb_err; case V4L2_CHIP_MATCH_I2C_ADDR: if (reg->match.addr != sd->i2c_addr) return -EINVAL; if (sd->sensor >= SENSOR_MT9V011 && sd->sensor <= SENSOR_MT9M112) { - if (i2c_r2(gspca_dev, reg->reg, (u16 *)®->val) < 0) - return -EINVAL; + i2c_r2(gspca_dev, reg->reg, (u16 *) ®->val); } else { - if (i2c_r1(gspca_dev, reg->reg, (u8 *)®->val) < 0) - return -EINVAL; + i2c_r1(gspca_dev, reg->reg, (u8 *) ®->val); } - return 0; + return gspca_dev->usb_err; } return -EINVAL; } @@ -1993,27 +1769,25 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev, struct v4l2_dbg_register *reg) { struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { case V4L2_CHIP_MATCH_HOST: if (reg->match.addr != 0) return -EINVAL; if (reg->reg < 0x1000 || reg->reg > 0x11ff) return -EINVAL; - if (reg_w1(gspca_dev, reg->reg, reg->val) < 0) - return -EINVAL; - return 0; + reg_w1(gspca_dev, reg->reg, reg->val); + return gspca_dev->usb_err; case V4L2_CHIP_MATCH_I2C_ADDR: if (reg->match.addr != sd->i2c_addr) return -EINVAL; if (sd->sensor >= SENSOR_MT9V011 && sd->sensor <= SENSOR_MT9M112) { - if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0) - return -EINVAL; + i2c_w2(gspca_dev, reg->reg, reg->val); } else { - if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0) - return -EINVAL; + i2c_w1(gspca_dev, reg->reg, reg->val); } - return 0; + return gspca_dev->usb_err; } return -EINVAL; } @@ -2050,9 +1824,9 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; cam->needs_full_bandwidth = 1; - sd->sensor = (id->driver_info >> 8) & 0xff; - sd->i2c_addr = id->driver_info & 0xff; - sd->flags = (id->driver_info >> 16) & 0xff; + sd->sensor = id->driver_info >> 8; + sd->i2c_addr = id->driver_info; + sd->flags = id->driver_info >> 16; switch (sd->sensor) { case SENSOR_MT9M112: @@ -2076,21 +1850,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->older_step = 0; sd->exposure_step = 16; - sd->brightness = BRIGHTNESS_DEFAULT; - sd->contrast = CONTRAST_DEFAULT; - sd->saturation = SATURATION_DEFAULT; - sd->hue = HUE_DEFAULT; - sd->gamma = GAMMA_DEFAULT; - sd->red = RED_DEFAULT; - sd->blue = BLUE_DEFAULT; + gspca_dev->cam.ctrls = sd->ctrls; - sd->hflip = HFLIP_DEFAULT; - sd->vflip = VFLIP_DEFAULT; - sd->exposure = EXPOSURE_DEFAULT; - sd->gain = GAIN_DEFAULT; - sd->auto_exposure = AUTO_EXPOSURE_DEFAULT; - - sd->quality = 95; + INIT_WORK(&sd->work, qual_upd); return 0; } @@ -2105,9 +1867,10 @@ static int sd_init(struct gspca_dev *gspca_dev) for (i = 0; i < ARRAY_SIZE(bridge_init); i++) { value = bridge_init[i][1]; - if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) { + reg_w(gspca_dev, bridge_init[i][0], &value, 1); + if (gspca_dev->usb_err < 0) { pr_err("Device initialization failed\n"); - return -ENODEV; + return gspca_dev->usb_err; } } @@ -2116,72 +1879,85 @@ static int sd_init(struct gspca_dev *gspca_dev) else reg_w1(gspca_dev, 0x1006, 0x20); - if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) { + reg_w(gspca_dev, 0x10c0, i2c_init, 9); + if (gspca_dev->usb_err < 0) { pr_err("Device initialization failed\n"); - return -ENODEV; + return gspca_dev->usb_err; } switch (sd->sensor) { case SENSOR_OV9650: - if (ov9650_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov9650_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV9650 sensor detected\n"); break; case SENSOR_OV9655: - if (ov9655_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov9655_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV9655 sensor detected\n"); break; case SENSOR_SOI968: - if (soi968_init_sensor(gspca_dev) < 0) - return -ENODEV; + soi968_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("SOI968 sensor detected\n"); break; case SENSOR_OV7660: - if (ov7660_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov7660_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV7660 sensor detected\n"); break; case SENSOR_OV7670: - if (ov7670_init_sensor(gspca_dev) < 0) - return -ENODEV; + ov7670_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("OV7670 sensor detected\n"); break; case SENSOR_MT9VPRB: - if (mt9v_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9v_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; + pr_info("MT9VPRB sensor detected\n"); break; case SENSOR_MT9M111: - if (mt9m111_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9m111_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("MT9M111 sensor detected\n"); break; case SENSOR_MT9M112: - if (mt9m112_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9m112_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("MT9M112 sensor detected\n"); break; case SENSOR_MT9M001: - if (mt9m001_init_sensor(gspca_dev) < 0) - return -ENODEV; + mt9m001_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; break; case SENSOR_HV7131R: - if (hv7131r_init_sensor(gspca_dev) < 0) - return -ENODEV; + hv7131r_init_sensor(gspca_dev); + if (gspca_dev->usb_err < 0) + break; pr_info("HV7131R sensor detected\n"); break; default: - pr_info("Unsupported Sensor\n"); - return -ENODEV; + pr_err("Unsupported sensor\n"); + gspca_dev->usb_err = -ENODEV; } - return 0; + return gspca_dev->usb_err; } static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode) { struct sd *sd = (struct sd *) gspca_dev; u8 value; + switch (sd->sensor) { case SENSOR_SOI968: if (mode & MODE_SXGA) { @@ -2264,6 +2040,7 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev) break; default: /* >= 640x480 */ gspca_dev->alt = 9; + break; } } @@ -2290,14 +2067,15 @@ static int sd_start(struct gspca_dev *gspca_dev) jpeg_define(sd->jpeg_hdr, height, width, 0x21); - jpeg_set_qual(sd->jpeg_hdr, sd->quality); + jpeg_set_qual(sd->jpeg_hdr, sd->ctrls[QUALITY].val); if (mode & MODE_RAW) fmt = 0x2d; else if (mode & MODE_JPEG) - fmt = 0x2c; + fmt = 0x24; else fmt = 0x2f; /* YUV 420 */ + sd->fmt = fmt; switch (mode & SCALE_MASK) { case SCALE_1280x1024: @@ -2334,18 +2112,37 @@ static int sd_start(struct gspca_dev *gspca_dev) set_hvflip(gspca_dev); reg_w1(gspca_dev, 0x1007, 0x20); + reg_w1(gspca_dev, 0x1061, 0x03); + + /* if JPEG, prepare the compression quality update */ + if (mode & MODE_JPEG) { + sd->pktsz = sd->npkt = 0; + sd->nchg = 0; + sd->work_thread = + create_singlethread_workqueue(KBUILD_MODNAME); + } - reg_r(gspca_dev, 0x1061, 1); - reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02); - return 0; + return gspca_dev->usb_err; } static void sd_stopN(struct gspca_dev *gspca_dev) { reg_w1(gspca_dev, 0x1007, 0x00); + reg_w1(gspca_dev, 0x1061, 0x01); +} + +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; - reg_r(gspca_dev, 0x1061, 1); - reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02); + if (sd->work_thread != NULL) { + mutex_unlock(&gspca_dev->usb_lock); + destroy_workqueue(sd->work_thread); + mutex_lock(&gspca_dev->usb_lock); + sd->work_thread = NULL; + } } static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) @@ -2359,15 +2156,15 @@ static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) * and exposure steps */ if (avg_lum < MIN_AVG_LUM) { - if (sd->exposure > 0x1770) + if (sd->ctrls[EXPOSURE].val > 0x1770) return; - new_exp = sd->exposure + sd->exposure_step; + new_exp = sd->ctrls[EXPOSURE].val + sd->exposure_step; if (new_exp > 0x1770) new_exp = 0x1770; if (new_exp < 0x10) new_exp = 0x10; - sd->exposure = new_exp; + sd->ctrls[EXPOSURE].val = new_exp; set_exposure(gspca_dev); sd->older_step = sd->old_step; @@ -2379,14 +2176,14 @@ static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) sd->exposure_step += 2; } if (avg_lum > MAX_AVG_LUM) { - if (sd->exposure < 0x10) + if (sd->ctrls[EXPOSURE].val < 0x10) return; - new_exp = sd->exposure - sd->exposure_step; + new_exp = sd->ctrls[EXPOSURE].val - sd->exposure_step; if (new_exp > 0x1700) new_exp = 0x1770; if (new_exp < 0x10) new_exp = 0x10; - sd->exposure = new_exp; + sd->ctrls[EXPOSURE].val = new_exp; set_exposure(gspca_dev); sd->older_step = sd->old_step; sd->old_step = 0; @@ -2403,14 +2200,14 @@ static void do_autogain(struct gspca_dev *gspca_dev, u16 avg_lum) struct sd *sd = (struct sd *) gspca_dev; if (avg_lum < MIN_AVG_LUM) { - if (sd->gain + 1 <= 28) { - sd->gain++; + if (sd->ctrls[GAIN].val + 1 <= 28) { + sd->ctrls[GAIN].val++; set_gain(gspca_dev); } } if (avg_lum > MAX_AVG_LUM) { - if (sd->gain > 0) { - sd->gain--; + if (sd->ctrls[GAIN].val > 0) { + sd->ctrls[GAIN].val--; set_gain(gspca_dev); } } @@ -2421,7 +2218,7 @@ static void sd_dqcallback(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int avg_lum; - if (!sd->auto_exposure) + if (!sd->ctrls[AUTOGAIN].val) return; avg_lum = atomic_read(&sd->avg_lum); @@ -2431,33 +2228,92 @@ static void sd_dqcallback(struct gspca_dev *gspca_dev) do_autoexposure(gspca_dev, avg_lum); } +/* JPEG quality update */ +/* This function is executed from a work queue. */ +static void qual_upd(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + + mutex_lock(&gspca_dev->usb_lock); + PDEBUG(D_STREAM, "qual_upd %d%%", sd->ctrls[QUALITY].val); + set_quality(gspca_dev); + mutex_unlock(&gspca_dev->usb_lock); +} + #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* interrupt packet */ int len) /* interrupt packet length */ { struct sd *sd = (struct sd *) gspca_dev; - int ret = -EINVAL; + if (!(sd->flags & HAS_NO_BUTTON) && len == 1) { - input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); - input_sync(gspca_dev->input_dev); - input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); - input_sync(gspca_dev->input_dev); - ret = 0; + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); + input_sync(gspca_dev->input_dev); + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); + input_sync(gspca_dev->input_dev); + return 0; } - return ret; + return -EINVAL; } #endif +/* check the JPEG compression */ +static void transfer_check(struct gspca_dev *gspca_dev, + u8 *data) +{ + struct sd *sd = (struct sd *) gspca_dev; + int new_qual, r; + + new_qual = 0; + + /* if USB error, discard the frame and decrease the quality */ + if (data[6] & 0x08) { /* USB FIFO full */ + gspca_dev->last_packet_type = DISCARD_PACKET; + new_qual = -5; + } else { + + /* else, compute the filling rate and a new JPEG quality */ + r = (sd->pktsz * 100) / + (sd->npkt * + gspca_dev->urb[0]->iso_frame_desc[0].length); + if (r >= 85) + new_qual = -3; + else if (r < 75) + new_qual = 2; + } + if (new_qual != 0) { + sd->nchg += new_qual; + if (sd->nchg < -6 || sd->nchg >= 12) { + sd->nchg = 0; + new_qual += sd->ctrls[QUALITY].val; + if (new_qual < QUALITY_MIN) + new_qual = QUALITY_MIN; + else if (new_qual > QUALITY_MAX) + new_qual = QUALITY_MAX; + if (new_qual != sd->ctrls[QUALITY].val) { + sd->ctrls[QUALITY].val = new_qual; + queue_work(sd->work_thread, &sd->work); + } + } + } else { + sd->nchg = 0; + } + sd->pktsz = sd->npkt = 0; +} + static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; - int avg_lum; + int avg_lum, is_jpeg; static u8 frame_header[] = {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96}; - if (len == 64 && memcmp(data, frame_header, 6) == 0) { + + is_jpeg = (sd->fmt & 0x03) == 0; + if (len >= 64 && memcmp(data, frame_header, 6) == 0) { avg_lum = ((data[35] >> 2) & 3) | (data[20] << 2) | (data[19] << 10); @@ -2484,12 +2340,18 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, (data[33] << 10); avg_lum >>= 9; atomic_set(&sd->avg_lum, avg_lum); + + if (is_jpeg) + transfer_check(gspca_dev, data); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); - return; + len -= 64; + if (len == 0) + return; + data += 64; } if (gspca_dev->last_packet_type == LAST_PACKET) { - if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv - & MODE_JPEG) { + if (is_jpeg) { gspca_frame_add(gspca_dev, FIRST_PACKET, sd->jpeg_hdr, JPEG_HDR_SZ); gspca_frame_add(gspca_dev, INTER_PACKET, @@ -2499,13 +2361,18 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data, len); } } else { + /* if JPEG, count the packets and their size */ + if (is_jpeg) { + sd->npkt++; + sd->pktsz += len; + } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } } /* sub-driver description */ static const struct sd_desc sd_desc = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, @@ -2513,6 +2380,7 @@ static const struct sd_desc sd_desc = { .isoc_init = sd_isoc_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) .int_pkt_scan = sd_int_pkt_scan, @@ -2581,7 +2449,7 @@ static int sd_probe(struct usb_interface *intf, } static struct usb_driver sd_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 0c9e6ddabd2c..db8e5084df06 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -39,7 +39,9 @@ enum e_ctrl { BLUE, RED, GAMMA, + EXPOSURE, AUTOGAIN, + GAIN, HFLIP, VFLIP, SHARPNESS, @@ -131,7 +133,9 @@ static void setcontrast(struct gspca_dev *gspca_dev); static void setcolors(struct gspca_dev *gspca_dev); static void setredblue(struct gspca_dev *gspca_dev); static void setgamma(struct gspca_dev *gspca_dev); -static void setautogain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); +static void setgain(struct gspca_dev *gspca_dev); static void sethvflip(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); static void setillum(struct gspca_dev *gspca_dev); @@ -213,6 +217,18 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setgamma }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 500, + .maximum = 1500, + .step = 1, + .default_value = 1024 + }, + .set_control = setexposure + }, [AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, @@ -223,7 +239,19 @@ static const struct ctrl sd_ctrls[NCTRLS] = { .step = 1, .default_value = 1 }, - .set_control = setautogain + .set = sd_setautogain, + }, +[GAIN] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 4, + .maximum = 49, + .step = 1, + .default_value = 15 + }, + .set_control = setgain }, [HFLIP] = { { @@ -290,60 +318,87 @@ static const struct ctrl sd_ctrls[NCTRLS] = { /* table of the disabled controls */ static const __u32 ctrl_dis[] = { -[SENSOR_ADCM1700] = (1 << AUTOGAIN) | +[SENSOR_ADCM1700] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_GC0307] = (1 << HFLIP) | +[SENSOR_GC0307] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_HV7131R] = (1 << HFLIP) | +[SENSOR_HV7131R] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << FREQ), -[SENSOR_MI0360] = (1 << HFLIP) | +[SENSOR_MI0360] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MI0360B] = (1 << HFLIP) | +[SENSOR_MI0360B] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MO4000] = (1 << HFLIP) | +[SENSOR_MO4000] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MT9V111] = (1 << HFLIP) | +[SENSOR_MT9V111] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_OM6802] = (1 << HFLIP) | +[SENSOR_OM6802] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_OV7630] = (1 << HFLIP), +[SENSOR_OV7630] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP), -[SENSOR_OV7648] = (1 << HFLIP), +[SENSOR_OV7648] = (1 << EXPOSURE) | + (1 << GAIN) | + (1 << HFLIP), -[SENSOR_OV7660] = (1 << AUTOGAIN) | +[SENSOR_OV7660] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP), -[SENSOR_PO1030] = (1 << AUTOGAIN) | +[SENSOR_PO1030] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_PO2030N] = (1 << AUTOGAIN) | - (1 << FREQ), +[SENSOR_PO2030N] = (1 << FREQ), -[SENSOR_SOI768] = (1 << AUTOGAIN) | +[SENSOR_SOI768] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_SP80708] = (1 << AUTOGAIN) | +[SENSOR_SP80708] = (1 << EXPOSURE) | + (1 << AUTOGAIN) | + (1 << GAIN) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), @@ -1242,14 +1297,6 @@ static const u8 po2030n_sensor_param1[][8] = { {0xa1, 0x6e, 0x05, 0x6f, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x6e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x6e, 0x07, 0x25, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x6e, 0x15, 0x04, 0x00, 0x00, 0x00, 0x10}, - {0xc1, 0x6e, 0x16, 0x52, 0x40, 0x48, 0x00, 0x10}, -/*after start*/ - {0xa1, 0x6e, 0x15, 0x0f, 0x00, 0x00, 0x00, 0x10}, - {DELAY, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */ - {0xa1, 0x6e, 0x1a, 0x05, 0x00, 0x00, 0x00, 0x10}, - {DELAY, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */ - {0xa1, 0x6e, 0x1b, 0x53, 0x00, 0x00, 0x00, 0x10}, {} }; @@ -1858,7 +1905,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return gspca_dev->usb_err; } -static u32 setexposure(struct gspca_dev *gspca_dev, +static u32 expo_adjust(struct gspca_dev *gspca_dev, u32 expo) { struct sd *sd = (struct sd *) gspca_dev; @@ -1982,28 +2029,28 @@ static void setbrightness(struct gspca_dev *gspca_dev) expo = 0x002dc6c0; else if (expo < 0x02a0) expo = 0x02a0; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); break; case SENSOR_MI0360: case SENSOR_MO4000: expo = brightness << 4; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); break; case SENSOR_MI0360B: expo = brightness << 2; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); break; case SENSOR_GC0307: expo = brightness; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); return; /* don't set the Y offset */ case SENSOR_MT9V111: expo = brightness << 2; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); return; /* don't set the Y offset */ case SENSOR_OM6802: expo = brightness << 2; - sd->exposure = setexposure(gspca_dev, expo); + sd->exposure = expo_adjust(gspca_dev, expo); return; /* Y offset already set */ } @@ -2112,6 +2159,23 @@ static void setgamma(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x20, gamma, sizeof gamma); } +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PO2030N) { + u8 rexpo[] = /* 1a: expo H, 1b: expo M */ + {0xa1, 0x6e, 0x1a, 0x00, 0x40, 0x00, 0x00, 0x10}; + + rexpo[3] = sd->ctrls[EXPOSURE].val >> 8; + i2c_w8(gspca_dev, rexpo); + msleep(6); + rexpo[2] = 0x1b; + rexpo[3] = sd->ctrls[EXPOSURE].val; + i2c_w8(gspca_dev, rexpo); + } +} + static void setautogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2139,6 +2203,19 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->ag_cnt = -1; } +static void setgain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PO2030N) { + u8 rgain[] = /* 15: gain */ + {0xa1, 0x6e, 0x15, 0x00, 0x40, 0x00, 0x00, 0x15}; + + rgain[3] = sd->ctrls[GAIN].val; + i2c_w8(gspca_dev, rgain); + } +} + static void sethvflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2623,6 +2700,10 @@ static int sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setcolors(gspca_dev); setautogain(gspca_dev); + if (!(gspca_dev->ctrl_inac & ((1 << EXPOSURE) | (1 << GAIN)))) { + setexposure(gspca_dev); + setgain(gspca_dev); + } setfreq(gspca_dev); sd->pktsz = sd->npkt = 0; @@ -2719,6 +2800,12 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } } +/* !! coarse_grained_expo_autogain is not used !! */ +#define exp_too_low_cnt bridge +#define exp_too_high_cnt sensor + +#include "autogain_functions.h" + static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2736,6 +2823,13 @@ static void do_autogain(struct gspca_dev *gspca_dev) delta = atomic_read(&sd->avg_lum); PDEBUG(D_FRAM, "mean lum %d", delta); + + if (sd->sensor == SENSOR_PO2030N) { + auto_gain_n_exposure(gspca_dev, delta, luma_mean, luma_delta, + 15, 1024); + return; + } + if (delta < luma_mean - luma_delta || delta > luma_mean + luma_delta) { switch (sd->sensor) { @@ -2744,7 +2838,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) expotimes); break; case SENSOR_HV7131R: @@ -2752,7 +2846,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 4; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) (expotimes << 8)); break; case SENSOR_OM6802: @@ -2761,7 +2855,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 2; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) expotimes); setredblue(gspca_dev); break; @@ -2773,7 +2867,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) expotimes = 0; - sd->exposure = setexposure(gspca_dev, + sd->exposure = expo_adjust(gspca_dev, (unsigned int) expotimes); setredblue(gspca_dev); break; @@ -2948,16 +3042,18 @@ marker_found: } } -static int sd_get_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - memset(jcomp, 0, sizeof *jcomp); - jcomp->quality = sd->quality; - jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT - | V4L2_JPEG_MARKER_DQT; - return 0; + sd->ctrls[AUTOGAIN].val = val; + if (val) + gspca_dev->ctrl_inac |= (1 << EXPOSURE) | (1 << GAIN); + else + gspca_dev->ctrl_inac &= ~(1 << EXPOSURE) & ~(1 << GAIN); + if (gspca_dev->streaming) + setautogain(gspca_dev); + return gspca_dev->usb_err; } static int sd_querymenu(struct gspca_dev *gspca_dev, @@ -3012,7 +3108,6 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, - .get_jcomp = sd_get_jcomp, .querymenu = sd_querymenu, #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) .int_pkt_scan = sd_int_pkt_scan, diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile index 5b318faf9aa8..38bc41061d83 100644 --- a/drivers/media/video/gspca/stv06xx/Makefile +++ b/drivers/media/video/gspca/stv06xx/Makefile @@ -6,5 +6,5 @@ gspca_stv06xx-objs := stv06xx.o \ stv06xx_pb0100.o \ stv06xx_st6422.o -ccflags-y += -Idrivers/media/video/gspca +ccflags-y += -I$(srctree)/drivers/media/video/gspca diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index b9e15bb0328b..7d9a4f1be9dc 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -1,7 +1,7 @@ /* - * Z-Star/Vimicro zc301/zc302p/vc30x library + * Z-Star/Vimicro zc301/zc302p/vc30x driver * - * Copyright (C) 2009-2011 Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2009-2012 Jean-Francois Moine <http://moinejf.free.fr> * Copyright (C) 2004 2005 2006 Michel Xhaard mxhaard@magic.fr * * This program is free software; you can redistribute it and/or modify @@ -21,8 +21,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#define MODULE_NAME "zc3xx" - #include <linux/input.h> #include "gspca.h" #include "jpeg.h" @@ -34,7 +32,7 @@ MODULE_LICENSE("GPL"); static int force_sensor = -1; -#define QUANT_VAL 1 /* quantization table */ +#define REG08_DEF 3 /* default JPEG compression (70%) */ #include "zc3xx-reg.h" /* controls */ @@ -46,6 +44,7 @@ enum e_ctrl { AUTOGAIN, LIGHTFREQ, SHARPNESS, + QUALITY, NCTRLS /* number of controls */ }; @@ -57,10 +56,10 @@ struct sd { struct gspca_ctrl ctrls[NCTRLS]; - u8 quality; /* image quality */ -#define QUALITY_MIN 50 -#define QUALITY_MAX 80 -#define QUALITY_DEF 70 + struct work_struct work; + struct workqueue_struct *work_thread; + + u8 reg08; /* webcam compression quality */ u8 bridge; u8 sensor; /* Type of image sensor chip */ @@ -101,6 +100,7 @@ static void setexposure(struct gspca_dev *gspca_dev); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static void setlightfreq(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); +static int sd_setquality(struct gspca_dev *gspca_dev, __s32 val); static const struct ctrl sd_ctrls[NCTRLS] = { [BRIGHTNESS] = { @@ -188,6 +188,18 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setsharpness }, +[QUALITY] = { + { + .id = V4L2_CID_JPEG_COMPRESSION_QUALITY, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Compression Quality", + .minimum = 40, + .maximum = 70, + .step = 1, + .default_value = 70 /* updated in sd_init() */ + }, + .set = sd_setquality + }, }; static const struct v4l2_pix_format vga_mode[] = { @@ -229,6 +241,9 @@ static const struct v4l2_pix_format sif_mode[] = { .priv = 0}, }; +/* bridge reg08 -> JPEG quality conversion table */ +static u8 jpeg_qual[] = {40, 50, 60, 70, /*80*/}; + /* usb exchanges */ struct usb_action { u8 req; @@ -3894,7 +3909,6 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */ /* Gains */ {0xa0, 0x20, ZC3XX_R1A9_DIGITALLIMITDIFF}, {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, - {0xa0, 0xa0, ZC3XX_R11D_GLOBALGAIN}, {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN}, /* Auto correction */ {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE}, @@ -5640,7 +5654,7 @@ static const struct usb_action gc0303_NoFlikerScale[] = { {} }; -static u8 reg_r_i(struct gspca_dev *gspca_dev, +static u8 reg_r(struct gspca_dev *gspca_dev, u16 index) { int ret; @@ -5655,24 +5669,14 @@ static u8 reg_r_i(struct gspca_dev *gspca_dev, index, gspca_dev->usb_buf, 1, 500); if (ret < 0) { - pr_err("reg_r_i err %d\n", ret); + pr_err("reg_r err %d\n", ret); gspca_dev->usb_err = ret; return 0; } return gspca_dev->usb_buf[0]; } -static u8 reg_r(struct gspca_dev *gspca_dev, - u16 index) -{ - u8 ret; - - ret = reg_r_i(gspca_dev, index); - PDEBUG(D_USBI, "reg r [%04x] -> %02x", index, ret); - return ret; -} - -static void reg_w_i(struct gspca_dev *gspca_dev, +static void reg_w(struct gspca_dev *gspca_dev, u8 value, u16 index) { @@ -5692,14 +5696,6 @@ static void reg_w_i(struct gspca_dev *gspca_dev, } } -static void reg_w(struct gspca_dev *gspca_dev, - u8 value, - u16 index) -{ - PDEBUG(D_USBO, "reg w [%04x] = %02x", index, value); - reg_w_i(gspca_dev, value, index); -} - static u16 i2c_read(struct gspca_dev *gspca_dev, u8 reg) { @@ -5708,16 +5704,14 @@ static u16 i2c_read(struct gspca_dev *gspca_dev, if (gspca_dev->usb_err < 0) return 0; - reg_w_i(gspca_dev, reg, 0x0092); - reg_w_i(gspca_dev, 0x02, 0x0090); /* <- read command */ + reg_w(gspca_dev, reg, 0x0092); + reg_w(gspca_dev, 0x02, 0x0090); /* <- read command */ msleep(20); - retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */ + retbyte = reg_r(gspca_dev, 0x0091); /* read status */ if (retbyte != 0x00) pr_err("i2c_r status error %02x\n", retbyte); - retval = reg_r_i(gspca_dev, 0x0095); /* read Lowbyte */ - retval |= reg_r_i(gspca_dev, 0x0096) << 8; /* read Hightbyte */ - PDEBUG(D_USBI, "i2c r [%02x] -> %04x (%02x)", - reg, retval, retbyte); + retval = reg_r(gspca_dev, 0x0095); /* read Lowbyte */ + retval |= reg_r(gspca_dev, 0x0096) << 8; /* read Hightbyte */ return retval; } @@ -5730,16 +5724,14 @@ static u8 i2c_write(struct gspca_dev *gspca_dev, if (gspca_dev->usb_err < 0) return 0; - reg_w_i(gspca_dev, reg, 0x92); - reg_w_i(gspca_dev, valL, 0x93); - reg_w_i(gspca_dev, valH, 0x94); - reg_w_i(gspca_dev, 0x01, 0x90); /* <- write command */ + reg_w(gspca_dev, reg, 0x92); + reg_w(gspca_dev, valL, 0x93); + reg_w(gspca_dev, valH, 0x94); + reg_w(gspca_dev, 0x01, 0x90); /* <- write command */ msleep(1); - retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */ + retbyte = reg_r(gspca_dev, 0x0091); /* read status */ if (retbyte != 0x00) pr_err("i2c_w status error %02x\n", retbyte); - PDEBUG(D_USBO, "i2c w [%02x] = %02x%02x (%02x)", - reg, valH, valL, retbyte); return retbyte; } @@ -5906,6 +5898,8 @@ static void getexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (sd->sensor != SENSOR_HV7131R) + return; sd->ctrls[EXPOSURE].val = (i2c_read(gspca_dev, 0x25) << 9) | (i2c_read(gspca_dev, 0x26) << 1) | (i2c_read(gspca_dev, 0x27) >> 7); @@ -5916,6 +5910,8 @@ static void setexposure(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int val; + if (sd->sensor != SENSOR_HV7131R) + return; val = sd->ctrls[EXPOSURE].val; i2c_write(gspca_dev, 0x25, val >> 9, 0x00); i2c_write(gspca_dev, 0x26, val >> 1, 0x00); @@ -5925,32 +5921,20 @@ static void setexposure(struct gspca_dev *gspca_dev) static void setquality(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - u8 frxt; + s8 reg07; + reg07 = 0; switch (sd->sensor) { - case SENSOR_ADCM2700: - case SENSOR_GC0305: - case SENSOR_HV7131B: - case SENSOR_HV7131R: case SENSOR_OV7620: + reg07 = 0x30; + break; + case SENSOR_HV7131R: case SENSOR_PAS202B: - case SENSOR_PO2030: - return; + return; /* done by work queue */ } -/*fixme: is it really 0008 0007 0018 for all other sensors? */ - reg_w(gspca_dev, QUANT_VAL, 0x0008); - frxt = 0x30; - reg_w(gspca_dev, frxt, 0x0007); -#if QUANT_VAL == 0 || QUANT_VAL == 1 || QUANT_VAL == 2 - frxt = 0xff; -#elif QUANT_VAL == 3 - frxt = 0xf0; -#elif QUANT_VAL == 4 - frxt = 0xe0; -#else - frxt = 0x20; -#endif - reg_w(gspca_dev, frxt, 0x0018); + reg_w(gspca_dev, sd->reg08, ZC3XX_R008_CLOCKSETTING); + if (reg07 != 0) + reg_w(gspca_dev, reg07, 0x0007); } /* Matches the sensor's internal frame rate to the lighting frequency. @@ -6084,6 +6068,115 @@ static void setautogain(struct gspca_dev *gspca_dev) reg_w(gspca_dev, autoval, 0x0180); } +/* update the transfer parameters */ +/* This function is executed from a work queue. */ +/* The exact use of the bridge registers 07 and 08 is not known. + * The following algorithm has been adapted from ms-win traces */ +static void transfer_update(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + int change, good; + u8 reg07, reg11; + + /* synchronize with the main driver and initialize the registers */ + mutex_lock(&gspca_dev->usb_lock); + reg07 = 0; /* max */ + reg_w(gspca_dev, reg07, 0x0007); + reg_w(gspca_dev, sd->reg08, ZC3XX_R008_CLOCKSETTING); + mutex_unlock(&gspca_dev->usb_lock); + + good = 0; + for (;;) { + msleep(100); + + /* get the transfer status */ + /* the bit 0 of the bridge register 11 indicates overflow */ + mutex_lock(&gspca_dev->usb_lock); + if (!gspca_dev->present || !gspca_dev->streaming) + goto err; + reg11 = reg_r(gspca_dev, 0x0011); + if (gspca_dev->usb_err < 0 + || !gspca_dev->present || !gspca_dev->streaming) + goto err; + + change = reg11 & 0x01; + if (change) { /* overflow */ + switch (reg07) { + case 0: /* max */ + reg07 = sd->sensor == SENSOR_HV7131R + ? 0x30 : 0x32; + if (sd->reg08 != 0) { + change = 3; + sd->reg08--; + } + break; + case 0x32: + reg07 -= 4; + break; + default: + reg07 -= 2; + break; + case 2: + change = 0; /* already min */ + break; + } + good = 0; + } else { /* no overflow */ + if (reg07 != 0) { /* if not max */ + good++; + if (good >= 10) { + good = 0; + change = 1; + reg07 += 2; + switch (reg07) { + case 0x30: + if (sd->sensor == SENSOR_PAS202B) + reg07 += 2; + break; + case 0x32: + case 0x34: + reg07 = 0; + break; + } + } + } else { /* reg07 max */ + if (sd->reg08 < sizeof jpeg_qual - 1) { + good++; + if (good > 10) { + sd->reg08++; + change = 2; + } + } + } + } + if (change) { + if (change & 1) { + reg_w(gspca_dev, reg07, 0x0007); + if (gspca_dev->usb_err < 0 + || !gspca_dev->present + || !gspca_dev->streaming) + goto err; + } + if (change & 2) { + reg_w(gspca_dev, sd->reg08, + ZC3XX_R008_CLOCKSETTING); + if (gspca_dev->usb_err < 0 + || !gspca_dev->present + || !gspca_dev->streaming) + goto err; + sd->ctrls[QUALITY].val = jpeg_qual[sd->reg08]; + jpeg_set_qual(sd->jpeg_hdr, + jpeg_qual[sd->reg08]); + } + } + mutex_unlock(&gspca_dev->usb_lock); + } + return; +err: + mutex_unlock(&gspca_dev->usb_lock); +} + static void send_unknown(struct gspca_dev *gspca_dev, int sensor) { reg_w(gspca_dev, 0x01, 0x0000); /* bridge reset */ @@ -6411,7 +6504,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->sensor = id->driver_info; gspca_dev->cam.ctrls = sd->ctrls; - sd->quality = QUALITY_DEF; + sd->reg08 = REG08_DEF; + + INIT_WORK(&sd->work, transfer_update); return 0; } @@ -6464,6 +6559,27 @@ static int sd_init(struct gspca_dev *gspca_dev) [SENSOR_PO2030] = 1, [SENSOR_TAS5130C] = 1, }; + static const u8 reg08_tb[SENSOR_MAX] = { + [SENSOR_ADCM2700] = 1, + [SENSOR_CS2102] = 3, + [SENSOR_CS2102K] = 3, + [SENSOR_GC0303] = 2, + [SENSOR_GC0305] = 3, + [SENSOR_HDCS2020] = 1, + [SENSOR_HV7131B] = 3, + [SENSOR_HV7131R] = 3, + [SENSOR_ICM105A] = 3, + [SENSOR_MC501CB] = 3, + [SENSOR_MT9V111_1] = 3, + [SENSOR_MT9V111_3] = 3, + [SENSOR_OV7620] = 1, + [SENSOR_OV7630C] = 3, + [SENSOR_PAS106] = 3, + [SENSOR_PAS202B] = 3, + [SENSOR_PB0330] = 3, + [SENSOR_PO2030] = 2, + [SENSOR_TAS5130C] = 3, + }; sensor = zcxx_probeSensor(gspca_dev); if (sensor >= 0) @@ -6528,7 +6644,6 @@ static int sd_init(struct gspca_dev *gspca_dev) case 0x0e: PDEBUG(D_PROBE, "Find Sensor PAS202B"); sd->sensor = SENSOR_PAS202B; -/* sd->sharpness = 1; */ break; case 0x0f: PDEBUG(D_PROBE, "Find Sensor PAS106"); @@ -6616,13 +6731,21 @@ static int sd_init(struct gspca_dev *gspca_dev) } sd->ctrls[GAMMA].def = gamma[sd->sensor]; + sd->reg08 = reg08_tb[sd->sensor]; + sd->ctrls[QUALITY].def = jpeg_qual[sd->reg08]; + sd->ctrls[QUALITY].min = jpeg_qual[0]; + sd->ctrls[QUALITY].max = jpeg_qual[ARRAY_SIZE(jpeg_qual) - 1]; switch (sd->sensor) { case SENSOR_HV7131R: + gspca_dev->ctrl_dis = (1 << QUALITY); break; case SENSOR_OV7630C: gspca_dev->ctrl_dis = (1 << LIGHTFREQ) | (1 << EXPOSURE); break; + case SENSOR_PAS202B: + gspca_dev->ctrl_dis = (1 << QUALITY) | (1 << EXPOSURE); + break; default: gspca_dev->ctrl_dis = (1 << EXPOSURE); break; @@ -6685,7 +6808,6 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ - jpeg_set_qual(sd->jpeg_hdr, sd->quality); mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; switch (sd->sensor) { @@ -6761,10 +6883,9 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_r(gspca_dev, 0x0180); /* from win */ reg_w(gspca_dev, 0x00, 0x0180); break; - default: - setquality(gspca_dev); - break; } + setquality(gspca_dev); + jpeg_set_qual(sd->jpeg_hdr, jpeg_qual[sd->reg08]); setlightfreq(gspca_dev); switch (sd->sensor) { @@ -6776,8 +6897,7 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x40, 0x0117); break; case SENSOR_HV7131R: - if (!sd->ctrls[AUTOGAIN].val) - setexposure(gspca_dev); + setexposure(gspca_dev); reg_w(gspca_dev, 0x00, ZC3XX_R1A7_CALCGLOBALMEAN); break; case SENSOR_GC0305: @@ -6802,13 +6922,19 @@ static int sd_start(struct gspca_dev *gspca_dev) } setautogain(gspca_dev); - switch (sd->sensor) { - case SENSOR_PO2030: - msleep(50); - reg_w(gspca_dev, 0x00, 0x0007); /* (from win traces) */ - reg_w(gspca_dev, 0x02, ZC3XX_R008_CLOCKSETTING); - break; + + /* start the transfer update thread if needed */ + if (gspca_dev->usb_err >= 0) { + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_PAS202B: + sd->work_thread = + create_singlethread_workqueue(KBUILD_MODNAME); + queue_work(sd->work_thread, &sd->work); + break; + } } + return gspca_dev->usb_err; } @@ -6817,6 +6943,12 @@ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (sd->work_thread != NULL) { + mutex_unlock(&gspca_dev->usb_lock); + destroy_workqueue(sd->work_thread); + mutex_lock(&gspca_dev->usb_lock); + sd->work_thread = NULL; + } if (!gspca_dev->present) return; send_unknown(gspca_dev, sd->sensor); @@ -6893,19 +7025,33 @@ static int sd_querymenu(struct gspca_dev *gspca_dev, return -EINVAL; } +static int sd_setquality(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + + for (i = 0; i < ARRAY_SIZE(jpeg_qual) - 1; i++) { + if (val <= jpeg_qual[i]) + break; + } + if (i > 0 + && i == sd->reg08 + && val < jpeg_qual[sd->reg08]) + i--; + sd->reg08 = i; + sd->ctrls[QUALITY].val = jpeg_qual[i]; + if (gspca_dev->streaming) + jpeg_set_qual(sd->jpeg_hdr, sd->ctrls[QUALITY].val); + return gspca_dev->usb_err; +} + static int sd_set_jcomp(struct gspca_dev *gspca_dev, struct v4l2_jpegcompression *jcomp) { struct sd *sd = (struct sd *) gspca_dev; - if (jcomp->quality < QUALITY_MIN) - sd->quality = QUALITY_MIN; - else if (jcomp->quality > QUALITY_MAX) - sd->quality = QUALITY_MAX; - else - sd->quality = jcomp->quality; - if (gspca_dev->streaming) - jpeg_set_qual(sd->jpeg_hdr, sd->quality); + sd_setquality(gspca_dev, jcomp->quality); + jcomp->quality = sd->ctrls[QUALITY].val; return gspca_dev->usb_err; } @@ -6915,7 +7061,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; memset(jcomp, 0, sizeof *jcomp); - jcomp->quality = sd->quality; + jcomp->quality = sd->ctrls[QUALITY].val; jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT; return 0; @@ -6938,7 +7084,7 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, #endif static const struct sd_desc sd_desc = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, @@ -7023,7 +7169,7 @@ static int sd_probe(struct usb_interface *intf, /* USB driver */ static struct usb_driver sd_driver = { - .name = MODULE_NAME, + .name = KBUILD_MODNAME, .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c index eec75bb57203..351e9bafe8fe 100644 --- a/drivers/media/video/imx074.c +++ b/drivers/media/video/imx074.c @@ -468,18 +468,7 @@ static struct i2c_driver imx074_i2c_driver = { .id_table = imx074_id, }; -static int __init imx074_mod_init(void) -{ - return i2c_add_driver(&imx074_i2c_driver); -} - -static void __exit imx074_mod_exit(void) -{ - i2c_del_driver(&imx074_i2c_driver); -} - -module_init(imx074_mod_init); -module_exit(imx074_mod_exit); +module_i2c_driver(imx074_i2c_driver); MODULE_DESCRIPTION("Sony IMX074 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c index e5ed4db32e7b..548236333cce 100644 --- a/drivers/media/video/indycam.c +++ b/drivers/media/video/indycam.c @@ -387,15 +387,4 @@ static struct i2c_driver indycam_driver = { .id_table = indycam_id, }; -static __init int init_indycam(void) -{ - return i2c_add_driver(&indycam_driver); -} - -static __exit void exit_indycam(void) -{ - i2c_del_driver(&indycam_driver); -} - -module_init(init_indycam); -module_exit(exit_indycam); +module_i2c_driver(indycam_driver); diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index a7c41d32f414..04f192a0398a 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -471,7 +471,7 @@ static const struct i2c_device_id ir_kbd_id[] = { { } }; -static struct i2c_driver driver = { +static struct i2c_driver ir_kbd_driver = { .driver = { .name = "ir-kbd-i2c", }, @@ -480,21 +480,10 @@ static struct i2c_driver driver = { .id_table = ir_kbd_id, }; +module_i2c_driver(ir_kbd_driver); + /* ----------------------------------------------------------------------- */ MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller"); MODULE_DESCRIPTION("input driver for i2c IR remote controls"); MODULE_LICENSE("GPL"); - -static int __init ir_init(void) -{ - return i2c_add_driver(&driver); -} - -static void __exit ir_fini(void) -{ - i2c_del_driver(&driver); -} - -module_init(ir_init); -module_exit(ir_fini); diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/video/ivtv/Makefile index 71ab76a5ab26..77de8a45b46f 100644 --- a/drivers/media/video/ivtv/Makefile +++ b/drivers/media/video/ivtv/Makefile @@ -7,8 +7,8 @@ ivtv-objs := ivtv-routing.o ivtv-cards.o ivtv-controls.o \ obj-$(CONFIG_VIDEO_IVTV) += ivtv.o obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/video +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c index b31ee1bceef8..c60424601cb9 100644 --- a/drivers/media/video/ivtv/ivtv-controls.c +++ b/drivers/media/video/ivtv/ivtv-controls.c @@ -21,6 +21,7 @@ #include "ivtv-driver.h" #include "ivtv-ioctl.h" #include "ivtv-controls.h" +#include "ivtv-mailbox.h" static int ivtv_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) { @@ -99,3 +100,64 @@ struct cx2341x_handler_ops ivtv_cxhdl_ops = { .s_video_encoding = ivtv_s_video_encoding, .s_stream_vbi_fmt = ivtv_s_stream_vbi_fmt, }; + +int ivtv_g_pts_frame(struct ivtv *itv, s64 *pts, s64 *frame) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + + if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { + *pts = (s64)((u64)itv->last_dec_timing[2] << 32) | + (u64)itv->last_dec_timing[1]; + *frame = itv->last_dec_timing[0]; + return 0; + } + *pts = 0; + *frame = 0; + if (atomic_read(&itv->decoding)) { + if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { + IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); + return -EIO; + } + memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); + set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); + *pts = (s64)((u64) data[2] << 32) | (u64) data[1]; + *frame = data[0]; + /*timing->scr = (u64) (((u64) data[4] << 32) | (u64) (data[3]));*/ + } + return 0; +} + +static int ivtv_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ivtv *itv = container_of(ctrl->handler, struct ivtv, cxhdl.hdl); + + switch (ctrl->id) { + /* V4L2_CID_MPEG_VIDEO_DEC_PTS and V4L2_CID_MPEG_VIDEO_DEC_FRAME + control cluster */ + case V4L2_CID_MPEG_VIDEO_DEC_PTS: + return ivtv_g_pts_frame(itv, &itv->ctrl_pts->val64, + &itv->ctrl_frame->val64); + } + return 0; +} + +static int ivtv_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ivtv *itv = container_of(ctrl->handler, struct ivtv, cxhdl.hdl); + + switch (ctrl->id) { + /* V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK and MULTILINGUAL_PLAYBACK + control cluster */ + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + itv->audio_stereo_mode = itv->ctrl_audio_playback->val - 1; + itv->audio_bilingual_mode = itv->ctrl_audio_multilingual_playback->val - 1; + ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); + break; + } + return 0; +} + +const struct v4l2_ctrl_ops ivtv_hdl_out_ops = { + .s_ctrl = ivtv_s_ctrl, + .g_volatile_ctrl = ivtv_g_volatile_ctrl, +}; diff --git a/drivers/media/video/ivtv/ivtv-controls.h b/drivers/media/video/ivtv/ivtv-controls.h index d12893dd0183..3999e6358312 100644 --- a/drivers/media/video/ivtv/ivtv-controls.h +++ b/drivers/media/video/ivtv/ivtv-controls.h @@ -22,5 +22,7 @@ #define IVTV_CONTROLS_H extern struct cx2341x_handler_ops ivtv_cxhdl_ops; +extern const struct v4l2_ctrl_ops ivtv_hdl_out_ops; +int ivtv_g_pts_frame(struct ivtv *itv, s64 *pts, s64 *frame); #endif diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 3949b7dc2368..679262ed13bc 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -55,7 +55,7 @@ #include "ivtv-routing.h" #include "ivtv-controls.h" #include "ivtv-gpio.h" - +#include <linux/dma-mapping.h> #include <media/tveeprom.h> #include <media/saa7115.h> #include <media/v4l2-chip-ident.h> @@ -99,7 +99,7 @@ static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, static unsigned int cardtype_c = 1; static unsigned int tuner_c = 1; -static bool radio_c = 1; +static int radio_c = 1; static unsigned int i2c_clock_period_c = 1; static char pal[] = "---"; static char secam[] = "--"; @@ -139,7 +139,7 @@ static int tunertype = -1; static int newi2c = -1; module_param_array(tuner, int, &tuner_c, 0644); -module_param_array(radio, bool, &radio_c, 0644); +module_param_array(radio, int, &radio_c, 0644); module_param_array(cardtype, int, &cardtype_c, 0644); module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); @@ -744,8 +744,6 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) itv->cur_dma_stream = -1; itv->cur_pio_stream = -1; - itv->audio_stereo_mode = AUDIO_STEREO; - itv->audio_bilingual_mode = AUDIO_MONO_LEFT; /* Ctrls */ itv->speed = 1000; @@ -815,7 +813,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, IVTV_ERR("Can't enable device!\n"); return -EIO; } - if (pci_set_dma_mask(pdev, 0xffffffff)) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { IVTV_ERR("No suitable DMA available.\n"); return -EIO; } @@ -1200,6 +1198,32 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, itv->tuner_std = itv->std; if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + struct v4l2_ctrl_handler *hdl = itv->v4l2_dev.ctrl_handler; + + itv->ctrl_pts = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_VIDEO_DEC_PTS, 0, 0, 1, 0); + itv->ctrl_frame = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_VIDEO_DEC_FRAME, 0, 0x7fffffff, 1, 0); + /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported, + mask that menu item. */ + itv->ctrl_audio_playback = + v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, + 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO); + itv->ctrl_audio_multilingual_playback = + v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, + V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, + 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, + V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT); + if (hdl->error) { + retval = hdl->error; + goto free_i2c; + } + v4l2_ctrl_cluster(2, &itv->ctrl_pts); + v4l2_ctrl_cluster(2, &itv->ctrl_audio_playback); ivtv_call_all(itv, video, s_std_output, itv->std); /* Turn off the output signal. The mpeg decoder is not yet active so without this you would get a green image until the @@ -1236,6 +1260,7 @@ free_streams: free_irq: free_irq(itv->pdev->irq, (void *)itv); free_i2c: + v4l2_ctrl_handler_free(&itv->cxhdl.hdl); exit_ivtv_i2c(itv); free_io: ivtv_iounmap(itv); @@ -1375,7 +1400,7 @@ static void ivtv_remove(struct pci_dev *pdev) else type = IVTV_DEC_STREAM_TYPE_MPG; ivtv_stop_v4l2_decode_stream(&itv->streams[type], - VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0); + V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); } ivtv_halt_firmware(itv); } @@ -1391,6 +1416,8 @@ static void ivtv_remove(struct pci_dev *pdev) ivtv_streams_cleanup(itv, 1); ivtv_udma_free(itv); + v4l2_ctrl_handler_free(&itv->cxhdl.hdl); + exit_ivtv_i2c(itv); free_irq(itv->pdev->irq, (void *)itv); diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 06f3d78389bf..f767df943954 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -331,6 +331,7 @@ struct ivtv_stream { struct ivtv *itv; /* for ease of use */ const char *name; /* name of the stream */ int type; /* stream type */ + u32 caps; /* V4L2 capabilities */ struct v4l2_fh *fh; /* pointer to the streaming filehandle */ spinlock_t qlock; /* locks access to the queues */ @@ -630,6 +631,16 @@ struct ivtv { struct v4l2_device v4l2_dev; struct cx2341x_handler cxhdl; + struct { + /* PTS/Frame count control cluster */ + struct v4l2_ctrl *ctrl_pts; + struct v4l2_ctrl *ctrl_frame; + }; + struct { + /* Audio Playback control cluster */ + struct v4l2_ctrl *ctrl_audio_playback; + struct v4l2_ctrl *ctrl_audio_multilingual_playback; + }; struct v4l2_ctrl_handler hdl_gpio; struct v4l2_subdev sd_gpio; /* GPIO sub-device */ u16 instance; @@ -649,7 +660,6 @@ struct ivtv { u8 audio_stereo_mode; /* decoder setting how to handle stereo MPEG audio */ u8 audio_bilingual_mode; /* decoder setting how to handle bilingual MPEG audio */ - /* Locking */ spinlock_t lock; /* lock access to this struct */ struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */ diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 2cd6c89b7d91..c9663e885b9f 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -900,7 +900,7 @@ int ivtv_v4l2_close(struct file *filp) if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) { struct ivtv_stream *s_vout = &itv->streams[IVTV_DEC_STREAM_TYPE_VOUT]; - ivtv_stop_decoding(id, VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0); + ivtv_stop_decoding(id, V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); /* If all output streams are closed, and if the user doesn't have IVTV_DEC_STREAM_TYPE_VOUT open, then disable CC on TV-out. */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index c4bc48143098..5452beef8e11 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -246,34 +246,40 @@ static int ivtv_validate_speed(int cur_speed, int new_speed) } static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, - struct video_command *vc, int try) + struct v4l2_decoder_cmd *dc, int try) { struct ivtv_stream *s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - switch (vc->cmd) { - case VIDEO_CMD_PLAY: { - vc->flags = 0; - vc->play.speed = ivtv_validate_speed(itv->speed, vc->play.speed); - if (vc->play.speed < 0) - vc->play.format = VIDEO_PLAY_FMT_GOP; + switch (dc->cmd) { + case V4L2_DEC_CMD_START: { + dc->flags &= V4L2_DEC_CMD_START_MUTE_AUDIO; + dc->start.speed = ivtv_validate_speed(itv->speed, dc->start.speed); + if (dc->start.speed < 0) + dc->start.format = V4L2_DEC_START_FMT_GOP; + else + dc->start.format = V4L2_DEC_START_FMT_NONE; + if (dc->start.speed != 500 && dc->start.speed != 1500) + dc->flags = dc->start.speed == 1000 ? 0 : + V4L2_DEC_CMD_START_MUTE_AUDIO; if (try) break; + itv->speed_mute_audio = dc->flags & V4L2_DEC_CMD_START_MUTE_AUDIO; if (ivtv_set_output_mode(itv, OUT_MPG) != OUT_MPG) return -EBUSY; if (test_and_clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags)) { /* forces ivtv_set_speed to be called */ itv->speed = 0; } - return ivtv_start_decoding(id, vc->play.speed); + return ivtv_start_decoding(id, dc->start.speed); } - case VIDEO_CMD_STOP: - vc->flags &= VIDEO_CMD_STOP_IMMEDIATELY|VIDEO_CMD_STOP_TO_BLACK; - if (vc->flags & VIDEO_CMD_STOP_IMMEDIATELY) - vc->stop.pts = 0; + case V4L2_DEC_CMD_STOP: + dc->flags &= V4L2_DEC_CMD_STOP_IMMEDIATELY | V4L2_DEC_CMD_STOP_TO_BLACK; + if (dc->flags & V4L2_DEC_CMD_STOP_IMMEDIATELY) + dc->stop.pts = 0; if (try) break; if (atomic_read(&itv->decoding) == 0) return 0; @@ -281,22 +287,22 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, return -EBUSY; itv->output_mode = OUT_NONE; - return ivtv_stop_v4l2_decode_stream(s, vc->flags, vc->stop.pts); + return ivtv_stop_v4l2_decode_stream(s, dc->flags, dc->stop.pts); - case VIDEO_CMD_FREEZE: - vc->flags &= VIDEO_CMD_FREEZE_TO_BLACK; + case V4L2_DEC_CMD_PAUSE: + dc->flags &= V4L2_DEC_CMD_PAUSE_TO_BLACK; if (try) break; if (itv->output_mode != OUT_MPG) return -EBUSY; if (atomic_read(&itv->decoding) > 0) { ivtv_vapi(itv, CX2341X_DEC_PAUSE_PLAYBACK, 1, - (vc->flags & VIDEO_CMD_FREEZE_TO_BLACK) ? 1 : 0); + (dc->flags & V4L2_DEC_CMD_PAUSE_TO_BLACK) ? 1 : 0); set_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); } break; - case VIDEO_CMD_CONTINUE: - vc->flags = 0; + case V4L2_DEC_CMD_RESUME: + dc->flags = 0; if (try) break; if (itv->output_mode != OUT_MPG) return -EBUSY; @@ -754,12 +760,15 @@ static int ivtv_s_register(struct file *file, void *fh, struct v4l2_dbg_register static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vcap) { - struct ivtv *itv = fh2id(fh)->itv; + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + struct ivtv_stream *s = &itv->streams[id->type]; strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->pdev)); - vcap->capabilities = itv->v4l2_cap; /* capabilities */ + vcap->capabilities = itv->v4l2_cap | V4L2_CAP_DEVICE_CAPS; + vcap->device_caps = s->caps; return 0; } @@ -1476,8 +1485,6 @@ static int ivtv_log_status(struct file *file, void *fh) struct v4l2_audio audin; int i; - IVTV_INFO("================= START STATUS CARD #%d =================\n", - itv->instance); IVTV_INFO("Version: %s Card: %s\n", IVTV_VERSION, itv->card_name); if (itv->hw_flags & IVTV_HW_TVEEPROM) { struct tveeprom tv; @@ -1501,13 +1508,6 @@ static int ivtv_log_status(struct file *file, void *fh) "YUV Frames", "Passthrough", }; - static const char * const audio_modes[5] = { - "Stereo", - "Left", - "Right", - "Mono", - "Swapped" - }; static const char * const alpha_mode[4] = { "None", "Global", @@ -1536,9 +1536,6 @@ static int ivtv_log_status(struct file *file, void *fh) ivtv_get_output(itv, itv->active_output, &vidout); ivtv_get_audio_output(itv, 0, &audout); IVTV_INFO("Video Output: %s\n", vidout.name); - IVTV_INFO("Audio Output: %s (Stereo/Bilingual: %s/%s)\n", audout.name, - audio_modes[itv->audio_stereo_mode], - audio_modes[itv->audio_bilingual_mode]); if (mode < 0 || mode > OUT_PASSTHROUGH) mode = OUT_NONE; IVTV_INFO("Output Mode: %s\n", output_modes[mode]); @@ -1566,12 +1563,27 @@ static int ivtv_log_status(struct file *file, void *fh) IVTV_INFO("Read MPG/VBI: %lld/%lld bytes\n", (long long)itv->mpg_data_received, (long long)itv->vbi_data_inserted); - IVTV_INFO("================== END STATUS CARD #%d ==================\n", - itv->instance); - return 0; } +static int ivtv_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dec) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + + IVTV_DEBUG_IOCTL("VIDIOC_DECODER_CMD %d\n", dec->cmd); + return ivtv_video_command(itv, id, dec, false); +} + +static int ivtv_try_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dec) +{ + struct ivtv_open_id *id = fh2id(file->private_data); + struct ivtv *itv = id->itv; + + IVTV_DEBUG_IOCTL("VIDIOC_TRY_DECODER_CMD %d\n", dec->cmd); + return ivtv_video_command(itv, id, dec, true); +} + static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) { struct ivtv_open_id *id = fh2id(filp->private_data); @@ -1605,9 +1617,15 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) return ivtv_yuv_prep_frame(itv, args); } + case IVTV_IOC_PASSTHROUGH_MODE: + IVTV_DEBUG_IOCTL("IVTV_IOC_PASSTHROUGH_MODE\n"); + if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) + return -EINVAL; + return ivtv_passthrough_mode(itv, *(int *)arg != 0); + case VIDEO_GET_PTS: { - u32 data[CX2341X_MBOX_MAX_DATA]; - u64 *pts = arg; + s64 *pts = arg; + s64 frame; IVTV_DEBUG_IOCTL("VIDEO_GET_PTS\n"); if (s->type < IVTV_DEC_STREAM_TYPE_MPG) { @@ -1616,29 +1634,12 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) } if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - - if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { - *pts = (u64) ((u64)itv->last_dec_timing[2] << 32) | - (u64)itv->last_dec_timing[1]; - break; - } - *pts = 0; - if (atomic_read(&itv->decoding)) { - if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { - IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); - return -EIO; - } - memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); - set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); - *pts = (u64) ((u64) data[2] << 32) | (u64) data[1]; - /*timing->scr = (u64) (((u64) data[4] << 32) | (u64) (data[3]));*/ - } - break; + return ivtv_g_pts_frame(itv, pts, &frame); } case VIDEO_GET_FRAME_COUNT: { - u32 data[CX2341X_MBOX_MAX_DATA]; - u64 *frame = arg; + s64 *frame = arg; + s64 pts; IVTV_DEBUG_IOCTL("VIDEO_GET_FRAME_COUNT\n"); if (s->type < IVTV_DEC_STREAM_TYPE_MPG) { @@ -1647,71 +1648,58 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) } if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - - if (test_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags)) { - *frame = itv->last_dec_timing[0]; - break; - } - *frame = 0; - if (atomic_read(&itv->decoding)) { - if (ivtv_api(itv, CX2341X_DEC_GET_TIMING_INFO, 5, data)) { - IVTV_DEBUG_WARN("GET_TIMING: couldn't read clock\n"); - return -EIO; - } - memcpy(itv->last_dec_timing, data, sizeof(itv->last_dec_timing)); - set_bit(IVTV_F_I_VALID_DEC_TIMINGS, &itv->i_flags); - *frame = data[0]; - } - break; + return ivtv_g_pts_frame(itv, &pts, frame); } case VIDEO_PLAY: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_PLAY\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_PLAY; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_START; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_STOP: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_STOP\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_STOP; - vc.flags = VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_STOP; + dc.flags = V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_FREEZE: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_FREEZE\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_FREEZE; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_PAUSE; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_CONTINUE: { - struct video_command vc; + struct v4l2_decoder_cmd dc; IVTV_DEBUG_IOCTL("VIDEO_CONTINUE\n"); - memset(&vc, 0, sizeof(vc)); - vc.cmd = VIDEO_CMD_CONTINUE; - return ivtv_video_command(itv, id, &vc, 0); + memset(&dc, 0, sizeof(dc)); + dc.cmd = V4L2_DEC_CMD_RESUME; + return ivtv_video_command(itv, id, &dc, 0); } case VIDEO_COMMAND: case VIDEO_TRY_COMMAND: { - struct video_command *vc = arg; + /* Note: struct v4l2_decoder_cmd has the same layout as + struct video_command */ + struct v4l2_decoder_cmd *dc = arg; int try = (cmd == VIDEO_TRY_COMMAND); if (try) - IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND %d\n", vc->cmd); + IVTV_DEBUG_IOCTL("VIDEO_TRY_COMMAND %d\n", dc->cmd); else - IVTV_DEBUG_IOCTL("VIDEO_COMMAND %d\n", vc->cmd); - return ivtv_video_command(itv, id, vc, try); + IVTV_DEBUG_IOCTL("VIDEO_COMMAND %d\n", dc->cmd); + return ivtv_video_command(itv, id, dc, try); } case VIDEO_GET_EVENT: { @@ -1775,17 +1763,13 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - itv->audio_stereo_mode = iarg; - ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); - return 0; + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg); case AUDIO_BILINGUAL_CHANNEL_SELECT: IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - itv->audio_bilingual_mode = iarg; - ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); - return 0; + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg); default: return -EINVAL; @@ -1800,6 +1784,7 @@ static long ivtv_default(struct file *file, void *fh, bool valid_prio, if (!valid_prio) { switch (cmd) { + case IVTV_IOC_PASSTHROUGH_MODE: case VIDEO_PLAY: case VIDEO_STOP: case VIDEO_FREEZE: @@ -1825,6 +1810,7 @@ static long ivtv_default(struct file *file, void *fh, bool valid_prio, } case IVTV_IOC_DMA_FRAME: + case IVTV_IOC_PASSTHROUGH_MODE: case VIDEO_GET_PTS: case VIDEO_GET_FRAME_COUNT: case VIDEO_GET_EVENT: @@ -1889,6 +1875,8 @@ static const struct v4l2_ioctl_ops ivtv_ioctl_ops = { .vidioc_enum_fmt_vid_cap = ivtv_enum_fmt_vid_cap, .vidioc_encoder_cmd = ivtv_encoder_cmd, .vidioc_try_encoder_cmd = ivtv_try_encoder_cmd, + .vidioc_decoder_cmd = ivtv_decoder_cmd, + .vidioc_try_decoder_cmd = ivtv_try_decoder_cmd, .vidioc_enum_fmt_vid_out = ivtv_enum_fmt_vid_out, .vidioc_g_fmt_vid_cap = ivtv_g_fmt_vid_cap, .vidioc_g_fmt_vbi_cap = ivtv_g_fmt_vbi_cap, diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index c6e28b4ebbed..7ea5ca7f012b 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -78,60 +78,73 @@ static struct { int num_offset; int dma, pio; enum v4l2_buf_type buf_type; + u32 v4l2_caps; const struct v4l2_file_operations *fops; } ivtv_stream_info[] = { { /* IVTV_ENC_STREAM_TYPE_MPG */ "encoder MPG", VFL_TYPE_GRABBER, 0, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_YUV */ "encoder YUV", VFL_TYPE_GRABBER, IVTV_V4L2_ENC_YUV_OFFSET, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_VBI */ "encoder VBI", VFL_TYPE_VBI, 0, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_PCM */ "encoder PCM", VFL_TYPE_GRABBER, IVTV_V4L2_ENC_PCM_OFFSET, PCI_DMA_FROMDEVICE, 0, V4L2_BUF_TYPE_PRIVATE, + V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_ENC_STREAM_TYPE_RAD */ "encoder radio", VFL_TYPE_RADIO, 0, PCI_DMA_NONE, 1, V4L2_BUF_TYPE_PRIVATE, + V4L2_CAP_RADIO | V4L2_CAP_TUNER, &ivtv_v4l2_enc_fops }, { /* IVTV_DEC_STREAM_TYPE_MPG */ "decoder MPG", VFL_TYPE_GRABBER, IVTV_V4L2_DEC_MPG_OFFSET, PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops }, { /* IVTV_DEC_STREAM_TYPE_VBI */ "decoder VBI", VFL_TYPE_VBI, IVTV_V4L2_DEC_VBI_OFFSET, PCI_DMA_NONE, 1, V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_READWRITE, &ivtv_v4l2_enc_fops }, { /* IVTV_DEC_STREAM_TYPE_VOUT */ "decoder VOUT", VFL_TYPE_VBI, IVTV_V4L2_DEC_VOUT_OFFSET, PCI_DMA_NONE, 1, V4L2_BUF_TYPE_VBI_OUTPUT, + V4L2_CAP_SLICED_VBI_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops }, { /* IVTV_DEC_STREAM_TYPE_YUV */ "decoder YUV", VFL_TYPE_GRABBER, IVTV_V4L2_DEC_YUV_OFFSET, PCI_DMA_TODEVICE, 0, V4L2_BUF_TYPE_VIDEO_OUTPUT, + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, &ivtv_v4l2_dec_fops } }; @@ -149,6 +162,7 @@ static void ivtv_stream_init(struct ivtv *itv, int type) s->itv = itv; s->type = type; s->name = ivtv_stream_info[type].name; + s->caps = ivtv_stream_info[type].v4l2_caps; if (ivtv_stream_info[type].pio) s->dma = PCI_DMA_NONE; @@ -209,8 +223,8 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) s->vdev->num = num; s->vdev->v4l2_dev = &itv->v4l2_dev; - s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler; s->vdev->fops = ivtv_stream_info[type].fops; + s->vdev->ctrl_handler = itv->v4l2_dev.ctrl_handler; s->vdev->release = video_device_release; s->vdev->tvnorms = V4L2_STD_ALL; s->vdev->lock = &itv->serialize_lock; @@ -891,7 +905,7 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) IVTV_DEBUG_INFO("Stop Decode at %llu, flags: %x\n", (unsigned long long)pts, flags); /* Stop Decoder */ - if (!(flags & VIDEO_CMD_STOP_IMMEDIATELY) || pts) { + if (!(flags & V4L2_DEC_CMD_STOP_IMMEDIATELY) || pts) { u32 tmp = 0; /* Wait until the decoder is no longer running */ @@ -911,7 +925,7 @@ int ivtv_stop_v4l2_decode_stream(struct ivtv_stream *s, int flags, u64 pts) break; } } - ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, flags & VIDEO_CMD_STOP_TO_BLACK, 0, 0); + ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 3, flags & V4L2_DEC_CMD_STOP_TO_BLACK, 0, 0); /* turn off notification of dual/stereo mode change */ ivtv_vapi(itv, CX2341X_DEC_SET_EVENT_NOTIFICATION, 4, 0, 0, IVTV_IRQ_DEC_AUD_MODE_CHG, -1); diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index afa91182b448..ee7ca2dcca2f 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -721,15 +721,4 @@ static struct i2c_driver ks0127_driver = { .id_table = ks0127_id, }; -static __init int init_ks0127(void) -{ - return i2c_add_driver(&ks0127_driver); -} - -static __exit void exit_ks0127(void) -{ - i2c_del_driver(&ks0127_driver); -} - -module_init(init_ks0127); -module_exit(exit_ks0127); +module_i2c_driver(ks0127_driver); diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c index 303ffa7df4ac..0991576f4c82 100644 --- a/drivers/media/video/m52790.c +++ b/drivers/media/video/m52790.c @@ -213,15 +213,4 @@ static struct i2c_driver m52790_driver = { .id_table = m52790_id, }; -static __init int init_m52790(void) -{ - return i2c_add_driver(&m52790_driver); -} - -static __exit void exit_m52790(void) -{ - i2c_del_driver(&m52790_driver); -} - -module_init(init_m52790); -module_exit(exit_m52790); +module_i2c_driver(m52790_driver); diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 93d768db9f33..d718aee01c77 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -982,8 +982,8 @@ static int __devinit m5mols_probe(struct i2c_client *client, } sd = &info->sd; - strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); v4l2_i2c_subdev_init(sd, client, &m5mols_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; sd->internal_ops = &m5mols_subdev_internal_ops; @@ -1057,18 +1057,7 @@ static struct i2c_driver m5mols_i2c_driver = { .id_table = m5mols_id, }; -static int __init m5mols_mod_init(void) -{ - return i2c_add_driver(&m5mols_i2c_driver); -} - -static void __exit m5mols_mod_exit(void) -{ - i2c_del_driver(&m5mols_i2c_driver); -} - -module_init(m5mols_mod_init); -module_exit(m5mols_mod_exit); +module_i2c_driver(m5mols_i2c_driver); MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>"); diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c index 37d20e73908a..996ac34d9a89 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.c +++ b/drivers/media/video/marvell-ccic/mcam-core.c @@ -509,11 +509,17 @@ static void mcam_sg_next_buffer(struct mcam_camera *cam) buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); list_del_init(&buf->queue); + /* + * Very Bad Not Good Things happen if you don't clear + * C1_DESC_ENA before making any descriptor changes. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa); mcam_reg_write(cam, REG_DESC_LEN_Y, buf->dma_desc_nent*sizeof(struct mcam_dma_desc)); mcam_reg_write(cam, REG_DESC_LEN_U, 0); mcam_reg_write(cam, REG_DESC_LEN_V, 0); + mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); cam->vb_bufs[0] = buf; } @@ -533,7 +539,6 @@ static void mcam_ctlr_dma_sg(struct mcam_camera *cam) mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD); mcam_sg_next_buffer(cam); - mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); cam->nbufs = 3; } @@ -556,17 +561,16 @@ static void mcam_dma_sg_done(struct mcam_camera *cam, int frame) struct mcam_vb_buffer *buf = cam->vb_bufs[0]; /* - * Very Bad Not Good Things happen if you don't clear - * C1_DESC_ENA before making any descriptor changes. + * If we're no longer supposed to be streaming, don't do anything. */ - mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); + if (cam->state != S_STREAMING) + return; /* * If we have another buffer available, put it in and * restart the engine. */ if (!list_empty(&cam->buffers)) { mcam_sg_next_buffer(cam); - mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); mcam_ctlr_start(cam); /* * Otherwise set CF_SG_RESTART and the controller will @@ -737,7 +741,14 @@ static void mcam_ctlr_stop_dma(struct mcam_camera *cam) mcam_ctlr_stop(cam); cam->state = S_IDLE; spin_unlock_irqrestore(&cam->dev_lock, flags); - msleep(40); + /* + * This is a brutally long sleep, but experience shows that + * it can take the controller a while to get the message that + * it needs to stop grabbing frames. In particular, we can + * sometimes (on mmp) get a frame at the end WITHOUT the + * start-of-frame indication. + */ + msleep(150); if (test_bit(CF_DMA_ACTIVE, &cam->flags)) cam_err(cam, "Timeout waiting for DMA to end\n"); /* This would be bad news - what now? */ @@ -880,6 +891,7 @@ static int mcam_read_setup(struct mcam_camera *cam) * Turn it loose. */ spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); mcam_reset_buffers(cam); mcam_ctlr_irq_enable(cam); cam->state = S_STREAMING; @@ -922,7 +934,7 @@ static void mcam_vb_buf_queue(struct vb2_buffer *vb) spin_lock_irqsave(&cam->dev_lock, flags); start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); list_add(&mvb->queue, &cam->buffers); - if (test_bit(CF_SG_RESTART, &cam->flags)) + if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) mcam_sg_restart(cam); spin_unlock_irqrestore(&cam->dev_lock, flags); if (start) @@ -1555,15 +1567,12 @@ static int mcam_v4l_release(struct file *filp) { struct mcam_camera *cam = filp->private_data; - cam_err(cam, "Release, %d frames, %d singles, %d delivered\n", frames, + cam_dbg(cam, "Release, %d frames, %d singles, %d delivered\n", frames, singles, delivered); mutex_lock(&cam->s_mutex); (cam->users)--; - if (filp == cam->owner) { - mcam_ctlr_stop_dma(cam); - cam->owner = NULL; - } if (cam->users == 0) { + mcam_ctlr_stop_dma(cam); mcam_cleanup_vb2(cam); mcam_ctlr_power_down(cam); if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) @@ -1688,6 +1697,8 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs) if (irqs & (IRQ_EOF0 << frame)) { mcam_frame_complete(cam, frame); handled = 1; + if (cam->buffer_mode == B_DMA_sg) + break; } /* * If a frame starts, note that we have DMA active. This diff --git a/drivers/media/video/marvell-ccic/mcam-core.h b/drivers/media/video/marvell-ccic/mcam-core.h index 917200e63255..bd6acba9fb37 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.h +++ b/drivers/media/video/marvell-ccic/mcam-core.h @@ -107,7 +107,6 @@ struct mcam_camera { enum mcam_state state; unsigned long flags; /* Buffer status, mainly (dev_lock) */ int users; /* How many open FDs */ - struct file *owner; /* Who has data access (v4l2) */ /* * Subsystem structures. diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/video/marvell-ccic/mmp-driver.c index 0d64e2d7474a..d23552323f45 100644 --- a/drivers/media/video/marvell-ccic/mmp-driver.c +++ b/drivers/media/video/marvell-ccic/mmp-driver.c @@ -106,6 +106,13 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) /* * Power control. */ +static void mmpcam_power_up_ctlr(struct mmp_camera *cam) +{ + iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); + mdelay(1); +} + static void mmpcam_power_up(struct mcam_camera *mcam) { struct mmp_camera *cam = mcam_to_cam(mcam); @@ -113,9 +120,7 @@ static void mmpcam_power_up(struct mcam_camera *mcam) /* * Turn on power and clocks to the controller. */ - iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); - iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); - mdelay(1); + mmpcam_power_up_ctlr(cam); /* * Provide power to the sensor. */ @@ -335,7 +340,7 @@ static int mmpcam_resume(struct platform_device *pdev) * touch a register even if nothing was active before; trust * me, it's better this way. */ - mmpcam_power_up(&cam->mcam); + mmpcam_power_up_ctlr(cam); return mccic_resume(&cam->mcam); } diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index d7cd0f633f63..82ce50721de3 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -881,18 +881,7 @@ static struct i2c_driver msp_driver = { .id_table = msp_id, }; -static __init int init_msp(void) -{ - return i2c_add_driver(&msp_driver); -} - -static __exit void exit_msp(void) -{ - i2c_del_driver(&msp_driver); -} - -module_init(init_msp); -module_exit(exit_msp); +module_i2c_driver(msp_driver); /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index 097c9d3d04a8..7e648183f157 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -730,18 +730,7 @@ static struct i2c_driver mt9m001_i2c_driver = { .id_table = mt9m001_id, }; -static int __init mt9m001_mod_init(void) -{ - return i2c_add_driver(&mt9m001_i2c_driver); -} - -static void __exit mt9m001_mod_exit(void) -{ - i2c_del_driver(&mt9m001_i2c_driver); -} - -module_init(mt9m001_mod_init); -module_exit(mt9m001_mod_exit); +module_i2c_driver(mt9m001_i2c_driver); MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c new file mode 100644 index 000000000000..7636672c3548 --- /dev/null +++ b/drivers/media/video/mt9m032.c @@ -0,0 +1,868 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/v4l2-mediabus.h> + +#include <media/media-entity.h> +#include <media/mt9m032.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#include "aptina-pll.h" + +/* + * width and height include active boundary and black parts + * + * column 0- 15 active boundary + * column 16-1455 image + * column 1456-1471 active boundary + * column 1472-1599 black + * + * row 0- 51 black + * row 53- 59 active boundary + * row 60-1139 image + * row 1140-1147 active boundary + * row 1148-1151 black + */ + +#define MT9M032_PIXEL_ARRAY_WIDTH 1600 +#define MT9M032_PIXEL_ARRAY_HEIGHT 1152 + +#define MT9M032_CHIP_VERSION 0x00 +#define MT9M032_CHIP_VERSION_VALUE 0x1402 +#define MT9M032_ROW_START 0x01 +#define MT9M032_ROW_START_MIN 0 +#define MT9M032_ROW_START_MAX 1152 +#define MT9M032_ROW_START_DEF 60 +#define MT9M032_COLUMN_START 0x02 +#define MT9M032_COLUMN_START_MIN 0 +#define MT9M032_COLUMN_START_MAX 1600 +#define MT9M032_COLUMN_START_DEF 16 +#define MT9M032_ROW_SIZE 0x03 +#define MT9M032_ROW_SIZE_MIN 32 +#define MT9M032_ROW_SIZE_MAX 1152 +#define MT9M032_ROW_SIZE_DEF 1080 +#define MT9M032_COLUMN_SIZE 0x04 +#define MT9M032_COLUMN_SIZE_MIN 32 +#define MT9M032_COLUMN_SIZE_MAX 1600 +#define MT9M032_COLUMN_SIZE_DEF 1440 +#define MT9M032_HBLANK 0x05 +#define MT9M032_VBLANK 0x06 +#define MT9M032_VBLANK_MAX 0x7ff +#define MT9M032_SHUTTER_WIDTH_HIGH 0x08 +#define MT9M032_SHUTTER_WIDTH_LOW 0x09 +#define MT9M032_SHUTTER_WIDTH_MIN 1 +#define MT9M032_SHUTTER_WIDTH_MAX 1048575 +#define MT9M032_SHUTTER_WIDTH_DEF 1943 +#define MT9M032_PIX_CLK_CTRL 0x0a +#define MT9M032_PIX_CLK_CTRL_INV_PIXCLK 0x8000 +#define MT9M032_RESTART 0x0b +#define MT9M032_RESET 0x0d +#define MT9M032_PLL_CONFIG1 0x11 +#define MT9M032_PLL_CONFIG1_OUTDIV_MASK 0x3f +#define MT9M032_PLL_CONFIG1_MUL_SHIFT 8 +#define MT9M032_READ_MODE1 0x1e +#define MT9M032_READ_MODE2 0x20 +#define MT9M032_READ_MODE2_VFLIP_SHIFT 15 +#define MT9M032_READ_MODE2_HFLIP_SHIFT 14 +#define MT9M032_READ_MODE2_ROW_BLC 0x40 +#define MT9M032_GAIN_GREEN1 0x2b +#define MT9M032_GAIN_BLUE 0x2c +#define MT9M032_GAIN_RED 0x2d +#define MT9M032_GAIN_GREEN2 0x2e + +/* write only */ +#define MT9M032_GAIN_ALL 0x35 +#define MT9M032_GAIN_DIGITAL_MASK 0x7f +#define MT9M032_GAIN_DIGITAL_SHIFT 8 +#define MT9M032_GAIN_AMUL_SHIFT 6 +#define MT9M032_GAIN_ANALOG_MASK 0x3f +#define MT9M032_FORMATTER1 0x9e +#define MT9M032_FORMATTER2 0x9f +#define MT9M032_FORMATTER2_DOUT_EN 0x1000 +#define MT9M032_FORMATTER2_PIXCLK_EN 0x2000 + +/* + * The available MT9M032 datasheet is missing documentation for register 0x10 + * MT9P031 seems to be close enough, so use constants from that datasheet for + * now. + * But keep the name MT9P031 to remind us, that this isn't really confirmed + * for this sensor. + */ +#define MT9P031_PLL_CONTROL 0x10 +#define MT9P031_PLL_CONTROL_PWROFF 0x0050 +#define MT9P031_PLL_CONTROL_PWRON 0x0051 +#define MT9P031_PLL_CONTROL_USEPLL 0x0052 +#define MT9P031_PLL_CONFIG2 0x11 +#define MT9P031_PLL_CONFIG2_P1_DIV_MASK 0x1f + +struct mt9m032 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct mt9m032_platform_data *pdata; + + unsigned int pix_clock; + + struct v4l2_ctrl_handler ctrls; + struct { + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + }; + + struct mutex lock; /* Protects streaming, format, interval and crop */ + + bool streaming; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + struct v4l2_fract frame_interval; +}; + +#define to_mt9m032(sd) container_of(sd, struct mt9m032, subdev) +#define to_dev(sensor) \ + (&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev) + +static int mt9m032_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width) +{ + unsigned int effective_width; + u32 ns; + + effective_width = width + 716; /* empirical value */ + ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock); + dev_dbg(to_dev(sensor), "MT9M032 line time: %u ns\n", ns); + return ns; +} + +static int mt9m032_update_timing(struct mt9m032 *sensor, + struct v4l2_fract *interval) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct v4l2_rect *crop = &sensor->crop; + unsigned int min_vblank; + unsigned int vblank; + u32 row_time; + + if (!interval) + interval = &sensor->frame_interval; + + row_time = mt9m032_row_time(sensor, crop->width); + + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + + if (vblank > MT9M032_VBLANK_MAX) { + /* hardware limits to 11 bit values */ + interval->denominator = 1000; + interval->numerator = + div_u64((crop->height + MT9M032_VBLANK_MAX) * + (u64)row_time * interval->denominator, + 1000000000ULL); + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + } + /* enforce minimal 1.6ms blanking time. */ + min_vblank = 1600000 / row_time; + vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX); + + return mt9m032_write(client, MT9M032_VBLANK, vblank); +} + +static int mt9m032_update_geom_timing(struct mt9m032 *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + ret = mt9m032_write(client, MT9M032_COLUMN_SIZE, + sensor->crop.width - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_SIZE, + sensor->crop.height - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_COLUMN_START, + sensor->crop.left); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_START, + sensor->crop.top); + if (!ret) + ret = mt9m032_update_timing(sensor, NULL); + return ret; +} + +static int update_formatter2(struct mt9m032 *sensor, bool streaming) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + u16 reg_val = MT9M032_FORMATTER2_DOUT_EN + | 0x0070; /* parts reserved! */ + /* possibly for changing to 14-bit mode */ + + if (streaming) + reg_val |= MT9M032_FORMATTER2_PIXCLK_EN; /* pixclock enable */ + + return mt9m032_write(client, MT9M032_FORMATTER2, reg_val); +} + +static int mt9m032_setup_pll(struct mt9m032 *sensor) +{ + static const struct aptina_pll_limits limits = { + .ext_clock_min = 8000000, + .ext_clock_max = 16500000, + .int_clock_min = 2000000, + .int_clock_max = 24000000, + .out_clock_min = 322000000, + .out_clock_max = 693000000, + .pix_clock_max = 99000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct mt9m032_platform_data *pdata = sensor->pdata; + struct aptina_pll pll; + int ret; + + pll.ext_clock = pdata->ext_clock; + pll.pix_clock = pdata->pix_clock; + + ret = aptina_pll_calculate(&client->dev, &limits, &pll); + if (ret < 0) + return ret; + + sensor->pix_clock = pdata->pix_clock; + + ret = mt9m032_write(client, MT9M032_PLL_CONFIG1, + (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) + | (pll.p1 - 1)); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONFIG2, pll.n - 1); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON | + MT9P031_PLL_CONTROL_USEPLL); + if (!ret) /* more reserved, Continuous, Master Mode */ + ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006); + if (!ret) /* Set 14-bit mode, select 7 divider */ + ret = mt9m032_write(client, MT9M032_FORMATTER1, 0x111e); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Subdev pad operations + */ + +static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index != 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_Y8_1X8; + return 0; +} + +static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index != 0 || fse->code != V4L2_MBUS_FMT_Y8_1X8) + return -EINVAL; + + fse->min_width = MT9M032_COLUMN_SIZE_DEF; + fse->max_width = MT9M032_COLUMN_SIZE_DEF; + fse->min_height = MT9M032_ROW_SIZE_DEF; + fse->max_height = MT9M032_ROW_SIZE_DEF; + + return 0; +} + +/** + * __mt9m032_get_pad_crop() - get crop rect + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try crop rect from + * @which: select try or active crop rect + * + * Returns a pointer the current active or fh relative try crop rect + */ +static struct v4l2_rect * +__mt9m032_get_pad_crop(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->crop; + default: + return NULL; + } +} + +/** + * __mt9m032_get_pad_format() - get format + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try format from + * @which: select try or active format + * + * Returns a pointer the current active or fh relative try format + */ +static struct v4l2_mbus_framefmt * +__mt9m032_get_pad_format(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->format; + default: + return NULL; + } +} + +static int mt9m032_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Scaling is not supported, the format is thus fixed. */ + ret = mt9m032_get_pad_format(subdev, fh, fmt); + +done: + mutex_lock(&sensor->lock); + return ret; +} + +static int mt9m032_get_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + crop->rect = *__mt9m032_get_pad_crop(sensor, fh, crop->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + int ret = 0; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9M032_COLUMN_START_MIN, + MT9M032_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9M032_ROW_START_MIN, + MT9M032_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), MT9M032_COLUMN_SIZE_MIN, + MT9M032_COLUMN_SIZE_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), MT9M032_ROW_SIZE_MIN, + MT9M032_ROW_SIZE_MAX); + + rect.width = min(rect.width, MT9M032_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9M032_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9m032_get_pad_crop(sensor, fh, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + format = __mt9m032_get_pad_format(sensor, fh, crop->which); + format->width = rect.width; + format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ret = mt9m032_update_geom_timing(sensor); + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + memset(fi, 0, sizeof(*fi)); + fi->interval = sensor->frame_interval; + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto done; + } + + /* Avoid divisions by 0. */ + if (fi->interval.denominator == 0) + fi->interval.denominator = 1; + + ret = mt9m032_update_timing(sensor, &fi->interval); + if (!ret) + sensor->frame_interval = fi->interval; + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + ret = update_formatter2(sensor, streaming); + if (!ret) + sensor->streaming = streaming; + mutex_unlock(&sensor->lock); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m032_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int val; + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + if (reg->match.addr != client->addr) + return -ENODEV; + + val = mt9m032_read(client, reg->reg); + if (val < 0) + return -EIO; + + reg->size = 2; + reg->val = val; + + return 0; +} + +static int mt9m032_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + return mt9m032_write(client, reg->reg, reg->val); +} +#endif + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT) + | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT) + | MT9M032_READ_MODE2_ROW_BLC + | 0x0007; + + return mt9m032_write(client, MT9M032_READ_MODE2, reg_val); +} + +static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int digital_gain_val; /* in 1/8th (0..127) */ + int analog_mul; /* 0 or 1 */ + int analog_gain_val; /* in 1/16th. (0..63) */ + u16 reg_val; + + digital_gain_val = 51; /* from setup example */ + + if (val < 63) { + analog_mul = 0; + analog_gain_val = val; + } else { + analog_mul = 1; + analog_gain_val = val / 2; + } + + /* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */ + /* overall_gain = a_gain * (1 + digital_gain_val / 8) */ + + reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK) + << MT9M032_GAIN_DIGITAL_SHIFT) + | ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT) + | (analog_gain_val & MT9M032_GAIN_ANALOG_MASK); + + return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val); +} + +static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl) +{ + if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) { + /* round because of multiplier used for values >= 63 */ + ctrl->val &= ~1; + } + + return 0; +} + +static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m032 *sensor = + container_of(ctrl->handler, struct mt9m032, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + return mt9m032_set_gain(sensor, ctrl->val); + + case V4L2_CID_HFLIP: + /* case V4L2_CID_VFLIP: -- In the same cluster */ + return update_read_mode2(sensor, sensor->vflip->val, + sensor->hflip->val); + + case V4L2_CID_EXPOSURE: + ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH, + (ctrl->val >> 16) & 0xffff); + if (ret < 0) + return ret; + + return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW, + ctrl->val & 0xffff); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9m032_ctrl_ops = { + .s_ctrl = mt9m032_set_ctrl, + .try_ctrl = mt9m032_try_ctrl, +}; + +/* -------------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops mt9m032_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m032_g_register, + .s_register = mt9m032_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9m032_video_ops = { + .s_stream = mt9m032_s_stream, + .g_frame_interval = mt9m032_get_frame_interval, + .s_frame_interval = mt9m032_set_frame_interval, +}; + +static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = { + .enum_mbus_code = mt9m032_enum_mbus_code, + .enum_frame_size = mt9m032_enum_frame_size, + .get_fmt = mt9m032_get_pad_format, + .set_fmt = mt9m032_set_pad_format, + .set_crop = mt9m032_set_pad_crop, + .get_crop = mt9m032_get_pad_crop, +}; + +static const struct v4l2_subdev_ops mt9m032_ops = { + .core = &mt9m032_core_ops, + .video = &mt9m032_video_ops, + .pad = &mt9m032_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9m032_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct i2c_adapter *adapter = client->adapter; + struct mt9m032 *sensor; + int chip_version; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + if (!client->dev.platform_data) + return -ENODEV; + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) + return -ENOMEM; + + mutex_init(&sensor->lock); + + sensor->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION); + if (chip_version != MT9M032_CHIP_VERSION_VALUE) { + dev_err(&client->dev, "MT9M032 not detected, wrong version " + "0x%04x\n", chip_version); + ret = -ENODEV; + goto error_sensor; + } + + dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n", + client->addr); + + sensor->frame_interval.numerator = 1; + sensor->frame_interval.denominator = 30; + + sensor->crop.left = MT9M032_COLUMN_START_DEF; + sensor->crop.top = MT9M032_ROW_START_DEF; + sensor->crop.width = MT9M032_COLUMN_SIZE_DEF; + sensor->crop.height = MT9M032_ROW_SIZE_DEF; + + sensor->format.width = sensor->crop.width; + sensor->format.height = sensor->crop.height; + sensor->format.code = V4L2_MBUS_FMT_Y8_1X8; + sensor->format.field = V4L2_FIELD_NONE; + sensor->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_ctrl_handler_init(&sensor->ctrls, 4); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN, + MT9M032_SHUTTER_WIDTH_MAX, 1, + MT9M032_SHUTTER_WIDTH_DEF); + + if (sensor->ctrls.error) { + ret = sensor->ctrls.error; + dev_err(&client->dev, "control initialization error %d\n", ret); + goto error_ctrl; + } + + v4l2_ctrl_cluster(2, &sensor->hflip); + + sensor->subdev.ctrl_handler = &sensor->ctrls; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0); + if (ret < 0) + goto error_ctrl; + + ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */ + if (ret < 0) + goto error_entity; + mt9m032_write(client, MT9M032_RESET, 0); /* reset off */ + if (ret < 0) + goto error_entity; + + ret = mt9m032_setup_pll(sensor); + if (ret < 0) + goto error_entity; + usleep_range(10000, 11000); + + ret = v4l2_ctrl_handler_setup(&sensor->ctrls); + if (ret < 0) + goto error_entity; + + /* SIZE */ + ret = mt9m032_update_geom_timing(sensor); + if (ret < 0) + goto error_entity; + + ret = mt9m032_write(client, 0x41, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x42, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x43, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x7f, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + if (sensor->pdata->invert_pixclock) { + ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL, + MT9M032_PIX_CLK_CTRL_INV_PIXCLK); + if (ret < 0) + goto error_entity; + } + + ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = update_formatter2(sensor, false); + if (ret < 0) + goto error_entity; + + return ret; + +error_entity: + media_entity_cleanup(&sensor->subdev.entity); +error_ctrl: + v4l2_ctrl_handler_free(&sensor->ctrls); +error_sensor: + mutex_destroy(&sensor->lock); + kfree(sensor); + return ret; +} + +static int mt9m032_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9m032 *sensor = to_mt9m032(subdev); + + v4l2_device_unregister_subdev(&sensor->subdev); + v4l2_ctrl_handler_free(&sensor->ctrls); + media_entity_cleanup(&sensor->subdev.entity); + mutex_destroy(&sensor->lock); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id mt9m032_id_table[] = { + { MT9M032_NAME, 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, mt9m032_id_table); + +static struct i2c_driver mt9m032_i2c_driver = { + .driver = { + .name = MT9M032_NAME, + }, + .probe = mt9m032_probe, + .remove = mt9m032_remove, + .id_table = mt9m032_id_table, +}; + +module_i2c_driver(mt9m032_i2c_driver); + +MODULE_AUTHOR("Martin Hostettler <martin@neutronstar.dyndns.org>"); +MODULE_DESCRIPTION("MT9M032 camera sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index bee65bff46e8..b0c529964329 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -1008,18 +1008,7 @@ static struct i2c_driver mt9m111_i2c_driver = { .id_table = mt9m111_id, }; -static int __init mt9m111_mod_init(void) -{ - return i2c_add_driver(&mt9m111_i2c_driver); -} - -static void __exit mt9m111_mod_exit(void) -{ - i2c_del_driver(&mt9m111_i2c_driver); -} - -module_init(mt9m111_mod_init); -module_exit(mt9m111_mod_exit); +module_i2c_driver(mt9m111_i2c_driver); MODULE_DESCRIPTION("Micron/Aptina MT9M111/MT9M112/MT9M131 Camera driver"); MODULE_AUTHOR("Robert Jarzmik"); diff --git a/drivers/media/video/mt9p031.c b/drivers/media/video/mt9p031.c index 93c3ec7426e8..c81eaf4fbe01 100644 --- a/drivers/media/video/mt9p031.c +++ b/drivers/media/video/mt9p031.c @@ -19,7 +19,6 @@ #include <linux/log2.h> #include <linux/pm.h> #include <linux/slab.h> -#include <media/v4l2-subdev.h> #include <linux/videodev2.h> #include <media/mt9p031.h> @@ -28,6 +27,8 @@ #include <media/v4l2-device.h> #include <media/v4l2-subdev.h> +#include "aptina-pll.h" + #define MT9P031_PIXEL_ARRAY_WIDTH 2752 #define MT9P031_PIXEL_ARRAY_HEIGHT 2004 @@ -98,14 +99,6 @@ #define MT9P031_TEST_PATTERN_RED 0xa2 #define MT9P031_TEST_PATTERN_BLUE 0xa3 -struct mt9p031_pll_divs { - u32 ext_freq; - u32 target_freq; - u8 m; - u8 n; - u8 p1; -}; - struct mt9p031 { struct v4l2_subdev subdev; struct media_pad pad; @@ -115,10 +108,8 @@ struct mt9p031 { struct mt9p031_platform_data *pdata; struct mutex power_lock; /* lock to protect power_count */ int power_count; - u16 xskip; - u16 yskip; - const struct mt9p031_pll_divs *pll; + struct aptina_pll pll; /* Registers cache */ u16 output_control; @@ -186,33 +177,31 @@ static int mt9p031_reset(struct mt9p031 *mt9p031) 0); } -/* - * This static table uses ext_freq and vdd_io values to select suitable - * PLL dividers m, n and p1 which have been calculated as specifiec in p36 - * of Aptina's mt9p031 datasheet. New values should be added here. - */ -static const struct mt9p031_pll_divs mt9p031_divs[] = { - /* ext_freq target_freq m n p1 */ - {21000000, 48000000, 26, 2, 6} -}; - -static int mt9p031_pll_get_divs(struct mt9p031 *mt9p031) +static int mt9p031_pll_setup(struct mt9p031 *mt9p031) { + static const struct aptina_pll_limits limits = { + .ext_clock_min = 6000000, + .ext_clock_max = 27000000, + .int_clock_min = 2000000, + .int_clock_max = 13500000, + .out_clock_min = 180000000, + .out_clock_max = 360000000, + .pix_clock_max = 96000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); - int i; + struct mt9p031_platform_data *pdata = mt9p031->pdata; - for (i = 0; i < ARRAY_SIZE(mt9p031_divs); i++) { - if (mt9p031_divs[i].ext_freq == mt9p031->pdata->ext_freq && - mt9p031_divs[i].target_freq == mt9p031->pdata->target_freq) { - mt9p031->pll = &mt9p031_divs[i]; - return 0; - } - } + mt9p031->pll.ext_clock = pdata->ext_freq; + mt9p031->pll.pix_clock = pdata->target_freq; - dev_err(&client->dev, "Couldn't find PLL dividers for ext_freq = %d, " - "target_freq = %d\n", mt9p031->pdata->ext_freq, - mt9p031->pdata->target_freq); - return -EINVAL; + return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll); } static int mt9p031_pll_enable(struct mt9p031 *mt9p031) @@ -226,11 +215,11 @@ static int mt9p031_pll_enable(struct mt9p031 *mt9p031) return ret; ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1, - (mt9p031->pll->m << 8) | (mt9p031->pll->n - 1)); + (mt9p031->pll.m << 8) | (mt9p031->pll.n - 1)); if (ret < 0) return ret; - ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll->p1 - 1); + ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll.p1 - 1); if (ret < 0) return ret; @@ -785,8 +774,6 @@ static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) format->field = V4L2_FIELD_NONE; format->colorspace = V4L2_COLORSPACE_SRGB; - mt9p031->xskip = 1; - mt9p031->yskip = 1; return mt9p031_set_power(subdev, 1); } @@ -905,7 +892,7 @@ static int mt9p031_probe(struct i2c_client *client, mt9p031->format.field = V4L2_FIELD_NONE; mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB; - ret = mt9p031_pll_get_divs(mt9p031); + ret = mt9p031_pll_setup(mt9p031); done: if (ret < 0) { @@ -945,18 +932,7 @@ static struct i2c_driver mt9p031_i2c_driver = { .id_table = mt9p031_id, }; -static int __init mt9p031_mod_init(void) -{ - return i2c_add_driver(&mt9p031_i2c_driver); -} - -static void __exit mt9p031_mod_exit(void) -{ - i2c_del_driver(&mt9p031_i2c_driver); -} - -module_init(mt9p031_mod_init); -module_exit(mt9p031_mod_exit); +module_i2c_driver(mt9p031_i2c_driver); MODULE_DESCRIPTION("Aptina MT9P031 Camera driver"); MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); diff --git a/drivers/media/video/mt9t001.c b/drivers/media/video/mt9t001.c index cd81d04a529e..49ca3cbfc6f1 100644 --- a/drivers/media/video/mt9t001.c +++ b/drivers/media/video/mt9t001.c @@ -817,18 +817,7 @@ static struct i2c_driver mt9t001_driver = { .id_table = mt9t001_id, }; -static int __init mt9t001_init(void) -{ - return i2c_add_driver(&mt9t001_driver); -} - -static void __exit mt9t001_exit(void) -{ - i2c_del_driver(&mt9t001_driver); -} - -module_init(mt9t001_init); -module_exit(mt9t001_exit); +module_i2c_driver(mt9t001_driver); MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver"); MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c index 84add1aef139..1415074138a5 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/video/mt9t031.c @@ -850,18 +850,7 @@ static struct i2c_driver mt9t031_i2c_driver = { .id_table = mt9t031_id, }; -static int __init mt9t031_mod_init(void) -{ - return i2c_add_driver(&mt9t031_i2c_driver); -} - -static void __exit mt9t031_mod_exit(void) -{ - i2c_del_driver(&mt9t031_i2c_driver); -} - -module_init(mt9t031_mod_init); -module_exit(mt9t031_mod_exit); +module_i2c_driver(mt9t031_i2c_driver); MODULE_DESCRIPTION("Micron MT9T031 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>"); diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index 7b34b11daf24..8d1445f12708 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -1117,21 +1117,7 @@ static struct i2c_driver mt9t112_i2c_driver = { .id_table = mt9t112_id, }; -/************************************************************************ - module function -************************************************************************/ -static int __init mt9t112_module_init(void) -{ - return i2c_add_driver(&mt9t112_i2c_driver); -} - -static void __exit mt9t112_module_exit(void) -{ - i2c_del_driver(&mt9t112_i2c_driver); -} - -module_init(mt9t112_module_init); -module_exit(mt9t112_module_exit); +module_i2c_driver(mt9t112_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for mt9t112"); MODULE_AUTHOR("Kuninori Morimoto"); diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index db74dd27c722..6bf01ad62765 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -709,15 +709,4 @@ static struct i2c_driver mt9v011_driver = { .id_table = mt9v011_id, }; -static __init int init_mt9v011(void) -{ - return i2c_add_driver(&mt9v011_driver); -} - -static __exit void exit_mt9v011(void) -{ - i2c_del_driver(&mt9v011_driver); -} - -module_init(init_mt9v011); -module_exit(exit_mt9v011); +module_i2c_driver(mt9v011_driver); diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 944940758fa3..bf63417adb8f 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -872,18 +872,7 @@ static struct i2c_driver mt9v022_i2c_driver = { .id_table = mt9v022_id, }; -static int __init mt9v022_mod_init(void) -{ - return i2c_add_driver(&mt9v022_i2c_driver); -} - -static void __exit mt9v022_mod_exit(void) -{ - i2c_del_driver(&mt9v022_i2c_driver); -} - -module_init(mt9v022_mod_init); -module_exit(mt9v022_mod_exit); +module_i2c_driver(mt9v022_i2c_driver); MODULE_DESCRIPTION("Micron MT9V022 Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c index d90b982cc218..75e253a343c5 100644 --- a/drivers/media/video/mt9v032.c +++ b/drivers/media/video/mt9v032.c @@ -756,18 +756,7 @@ static struct i2c_driver mt9v032_driver = { .id_table = mt9v032_id, }; -static int __init mt9v032_init(void) -{ - return i2c_add_driver(&mt9v032_driver); -} - -static void __exit mt9v032_exit(void) -{ - i2c_del_driver(&mt9v032_driver); -} - -module_init(mt9v032_init); -module_exit(mt9v032_exit); +module_i2c_driver(mt9v032_driver); MODULE_DESCRIPTION("Aptina MT9V032 Camera driver"); MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 04aab0c538aa..18afaeeadb7b 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008, Sascha Hauer, Pengutronix * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography + * Copyright (C) 2012, Javier Martin, Vista Silicon S.L. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,6 +19,7 @@ #include <linux/dma-mapping.h> #include <linux/errno.h> #include <linux/fs.h> +#include <linux/gcd.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -30,17 +32,14 @@ #include <media/v4l2-common.h> #include <media/v4l2-dev.h> -#include <media/videobuf-core.h> -#include <media/videobuf-dma-contig.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> #include <media/soc_camera.h> #include <media/soc_mediabus.h> #include <linux/videodev2.h> #include <mach/mx2_cam.h> -#ifdef CONFIG_MACH_MX27 -#include <mach/dma-mx1-mx2.h> -#endif #include <mach/hardware.h> #include <asm/dma.h> @@ -206,10 +205,23 @@ #define PRP_INTR_LBOVF (1 << 7) #define PRP_INTR_CH2OVF (1 << 8) -#define mx27_camera_emma(pcdev) (cpu_is_mx27() && pcdev->use_emma) +/* Resizing registers */ +#define PRP_RZ_VALID_TBL_LEN(x) ((x) << 24) +#define PRP_RZ_VALID_BILINEAR (1 << 31) #define MAX_VIDEO_MEM 16 +#define RESIZE_NUM_MIN 1 +#define RESIZE_NUM_MAX 20 +#define BC_COEF 3 +#define SZ_COEF (1 << BC_COEF) + +#define RESIZE_DIR_H 0 +#define RESIZE_DIR_V 1 + +#define RESIZE_ALGO_BILINEAR 0 +#define RESIZE_ALGO_AVERAGING 1 + struct mx2_prp_cfg { int channel; u32 in_fmt; @@ -219,6 +231,13 @@ struct mx2_prp_cfg { u32 irq_flags; }; +/* prp resizing parameters */ +struct emma_prp_resize { + int algo; /* type of algorithm used */ + int len; /* number of coefficients */ + unsigned char s[RESIZE_NUM_MAX]; /* table of coefficients */ +}; + /* prp configuration for a client-host fmt pair */ struct mx2_fmt_cfg { enum v4l2_mbus_pixelcode in_fmt; @@ -226,6 +245,26 @@ struct mx2_fmt_cfg { struct mx2_prp_cfg cfg; }; +enum mx2_buffer_state { + MX2_STATE_QUEUED, + MX2_STATE_ACTIVE, + MX2_STATE_DONE, +}; + +struct mx2_buf_internal { + struct list_head queue; + int bufnum; + bool discard; +}; + +/* buffer for one video frame */ +struct mx2_buffer { + /* common v4l buffer stuff -- must be first */ + struct vb2_buffer vb; + enum mx2_buffer_state state; + struct mx2_buf_internal internal; +}; + struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; @@ -242,6 +281,7 @@ struct mx2_camera_dev { struct list_head capture; struct list_head active_bufs; + struct list_head discard; spinlock_t lock; @@ -250,26 +290,23 @@ struct mx2_camera_dev { struct mx2_buffer *fb1_active; struct mx2_buffer *fb2_active; - int use_emma; - u32 csicr1; + struct mx2_buf_internal buf_discard[2]; void *discard_buffer; dma_addr_t discard_buffer_dma; size_t discard_size; struct mx2_fmt_cfg *emma_prp; + struct emma_prp_resize resizing[2]; + unsigned int s_width, s_height; u32 frame_count; + struct vb2_alloc_ctx *alloc_ctx; }; -/* buffer for one video frame */ -struct mx2_buffer { - /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - - enum v4l2_mbus_pixelcode code; - - int bufnum; -}; +static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf) +{ + return container_of(int_buf, struct mx2_buffer, internal); +} static struct mx2_fmt_cfg mx27_emma_prp_table[] = { /* @@ -324,13 +361,36 @@ static struct mx2_fmt_cfg *mx27_emma_prp_get_format( return &mx27_emma_prp_table[0]; }; +static void mx27_update_emma_buf(struct mx2_camera_dev *pcdev, + unsigned long phys, int bufnum) +{ + struct mx2_fmt_cfg *prp = pcdev->emma_prp; + + if (prp->cfg.channel == 1) { + writel(phys, pcdev->base_emma + + PRP_DEST_RGB1_PTR + 4 * bufnum); + } else { + writel(phys, pcdev->base_emma + + PRP_DEST_Y_PTR - 0x14 * bufnum); + if (prp->out_fmt == V4L2_PIX_FMT_YUV420) { + u32 imgsize = pcdev->icd->user_height * + pcdev->icd->user_width; + + writel(phys + imgsize, pcdev->base_emma + + PRP_DEST_CB_PTR - 0x14 * bufnum); + writel(phys + ((5 * imgsize) / 4), pcdev->base_emma + + PRP_DEST_CR_PTR - 0x14 * bufnum); + } + } +} + static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) { unsigned long flags; clk_disable(pcdev->clk_csi); writel(0, pcdev->base_csi + CSICR1); - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { writel(0, pcdev->base_emma + PRP_CNTL); } else if (cpu_is_mx25()) { spin_lock_irqsave(&pcdev->lock, flags); @@ -362,7 +422,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) csicr1 = CSICR1_MCLKEN; - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | CSICR1_RXFF_LEVEL(0); } else if (cpu_is_mx27()) @@ -392,56 +452,13 @@ static void mx2_camera_remove_device(struct soc_camera_device *icd) mx2_camera_deactivate(pcdev); - if (pcdev->discard_buffer) { - dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size, - pcdev->discard_buffer, - pcdev->discard_buffer_dma); - pcdev->discard_buffer = NULL; - } - pcdev->icd = NULL; } -#ifdef CONFIG_MACH_MX27 -static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev) -{ - u32 tmp; - - imx_dma_enable(pcdev->dma); - - tmp = readl(pcdev->base_csi + CSICR1); - tmp |= CSICR1_RF_OR_INTEN; - writel(tmp, pcdev->base_csi + CSICR1); -} - -static irqreturn_t mx27_camera_irq(int irq_csi, void *data) -{ - struct mx2_camera_dev *pcdev = data; - u32 status = readl(pcdev->base_csi + CSISR); - - if (status & CSISR_SOF_INT && pcdev->active) { - u32 tmp; - - tmp = readl(pcdev->base_csi + CSICR1); - writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1); - mx27_camera_dma_enable(pcdev); - } - - writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR); - - return IRQ_HANDLED; -} -#else -static irqreturn_t mx27_camera_irq(int irq_csi, void *data) -{ - return IRQ_NONE; -} -#endif /* CONFIG_MACH_MX27 */ - static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, int state) { - struct videobuf_buffer *vb; + struct vb2_buffer *vb; struct mx2_buffer *buf; struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active : &pcdev->fb2_active; @@ -454,25 +471,24 @@ static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, goto out; vb = &(*fb_active)->vb; - dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); - vb->state = state; - do_gettimeofday(&vb->ts); - vb->field_count++; - - wake_up(&vb->done); + do_gettimeofday(&vb->v4l2_buf.timestamp); + vb->v4l2_buf.sequence++; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); if (list_empty(&pcdev->capture)) { buf = NULL; writel(0, pcdev->base_csi + fb_reg); } else { - buf = list_entry(pcdev->capture.next, struct mx2_buffer, - vb.queue); + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); vb = &buf->vb; - list_del(&vb->queue); - vb->state = VIDEOBUF_ACTIVE; - writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg); + list_del(&buf->internal.queue); + buf->state = MX2_STATE_ACTIVE; + writel(vb2_dma_contig_plane_dma_addr(vb, 0), + pcdev->base_csi + fb_reg); } *fb_active = buf; @@ -487,9 +503,9 @@ static irqreturn_t mx25_camera_irq(int irq_csi, void *data) u32 status = readl(pcdev->base_csi + CSISR); if (status & CSISR_DMA_TSF_FB1_INT) - mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE); + mx25_camera_frame_done(pcdev, 1, MX2_STATE_DONE); else if (status & CSISR_DMA_TSF_FB2_INT) - mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE); + mx25_camera_frame_done(pcdev, 2, MX2_STATE_DONE); /* FIXME: handle CSISR_RFF_OR_INT */ @@ -501,59 +517,50 @@ static irqreturn_t mx25_camera_irq(int irq_csi, void *data) /* * Videobuf operations */ -static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) +static int mx2_videobuf_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *count, unsigned int *num_planes, + unsigned int sizes[], void *alloc_ctxs[]) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct mx2_camera_dev *pcdev = ici->priv; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size); + dev_dbg(icd->parent, "count=%d, size=%d\n", *count, sizes[0]); + + /* TODO: support for VIDIOC_CREATE_BUFS not ready */ + if (fmt != NULL) + return -ENOTTY; if (bytes_per_line < 0) return bytes_per_line; - *size = bytes_per_line * icd->user_height; + alloc_ctxs[0] = pcdev->alloc_ctx; + + sizes[0] = bytes_per_line * icd->user_height; if (0 == *count) *count = 32; - if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) - *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; + if (!*num_planes && + sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024) + *count = (MAX_VIDEO_MEM * 1024 * 1024) / sizes[0]; - return 0; -} + *num_planes = 1; -static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf) -{ - struct soc_camera_device *icd = vq->priv_data; - struct videobuf_buffer *vb = &buf->vb; - - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); - - /* - * This waits until this buffer is out of danger, i.e., until it is no - * longer in state VIDEOBUF_QUEUED or VIDEOBUF_ACTIVE - */ - videobuf_waiton(vq, vb, 0, 0); - - videobuf_dma_contig_free(vq, vb); - dev_dbg(icd->parent, "%s freed\n", __func__); - - vb->state = VIDEOBUF_NEEDS_INIT; + return 0; } -static int mx2_videobuf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, enum v4l2_field field) +static int mx2_videobuf_prepare(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; - struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); int ret = 0; - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); if (bytes_per_line < 0) return bytes_per_line; @@ -563,99 +570,58 @@ static int mx2_videobuf_prepare(struct videobuf_queue *vq, * This can be useful if you want to see if we actually fill * the buffer with something */ - memset((void *)vb->baddr, 0xaa, vb->bsize); + memset((void *)vb2_plane_vaddr(vb, 0), + 0xaa, vb2_get_plane_payload(vb, 0)); #endif - if (buf->code != icd->current_fmt->code || - vb->width != icd->user_width || - vb->height != icd->user_height || - vb->field != field) { - buf->code = icd->current_fmt->code; - vb->width = icd->user_width; - vb->height = icd->user_height; - vb->field = field; - vb->state = VIDEOBUF_NEEDS_INIT; - } - - vb->size = bytes_per_line * vb->height; - if (vb->baddr && vb->bsize < vb->size) { + vb2_set_plane_payload(vb, 0, bytes_per_line * icd->user_height); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) { ret = -EINVAL; goto out; } - if (vb->state == VIDEOBUF_NEEDS_INIT) { - ret = videobuf_iolock(vq, vb, NULL); - if (ret) - goto fail; - - vb->state = VIDEOBUF_PREPARED; - } - return 0; -fail: - free_buffer(vq, buf); out: return ret; } -static void mx2_videobuf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void mx2_videobuf_queue(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); unsigned long flags; - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); spin_lock_irqsave(&pcdev->lock, flags); - vb->state = VIDEOBUF_QUEUED; - list_add_tail(&vb->queue, &pcdev->capture); + buf->state = MX2_STATE_QUEUED; + list_add_tail(&buf->internal.queue, &pcdev->capture); - if (mx27_camera_emma(pcdev)) { - goto out; -#ifdef CONFIG_MACH_MX27 - } else if (cpu_is_mx27()) { - int ret; - - if (pcdev->active == NULL) { - ret = imx_dma_setup_single(pcdev->dma, - videobuf_to_dma_contig(vb), vb->size, - (u32)pcdev->base_dma + 0x10, - DMA_MODE_READ); - if (ret) { - vb->state = VIDEOBUF_ERROR; - wake_up(&vb->done); - goto out; - } - - vb->state = VIDEOBUF_ACTIVE; - pcdev->active = buf; - } -#endif - } else { /* cpu_is_mx25() */ + if (cpu_is_mx25()) { u32 csicr3, dma_inten = 0; if (pcdev->fb1_active == NULL) { - writel(videobuf_to_dma_contig(vb), + writel(vb2_dma_contig_plane_dma_addr(vb, 0), pcdev->base_csi + CSIDMASA_FB1); pcdev->fb1_active = buf; dma_inten = CSICR1_FB1_DMA_INTEN; } else if (pcdev->fb2_active == NULL) { - writel(videobuf_to_dma_contig(vb), + writel(vb2_dma_contig_plane_dma_addr(vb, 0), pcdev->base_csi + CSIDMASA_FB2); pcdev->fb2_active = buf; dma_inten = CSICR1_FB2_DMA_INTEN; } if (dma_inten) { - list_del(&vb->queue); - vb->state = VIDEOBUF_ACTIVE; + list_del(&buf->internal.queue); + buf->state = MX2_STATE_ACTIVE; csicr3 = readl(pcdev->base_csi + CSICR3); @@ -674,36 +640,31 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq, } } -out: spin_unlock_irqrestore(&pcdev->lock, flags); } -static void mx2_videobuf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void mx2_videobuf_release(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); unsigned long flags; #ifdef DEBUG - dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); - switch (vb->state) { - case VIDEOBUF_ACTIVE: + switch (buf->state) { + case MX2_STATE_ACTIVE: dev_info(icd->parent, "%s (active)\n", __func__); break; - case VIDEOBUF_QUEUED: + case MX2_STATE_QUEUED: dev_info(icd->parent, "%s (queued)\n", __func__); break; - case VIDEOBUF_PREPARED: - dev_info(icd->parent, "%s (prepared)\n", __func__); - break; default: dev_info(icd->parent, "%s (unknown) %d\n", __func__, - vb->state); + buf->state); break; } #endif @@ -717,11 +678,9 @@ static void mx2_videobuf_release(struct videobuf_queue *vq, * state. This requires a specific handling for each of the these DMA * types. */ + spin_lock_irqsave(&pcdev->lock, flags); - if (vb->state == VIDEOBUF_QUEUED) { - list_del(&vb->queue); - vb->state = VIDEOBUF_ERROR; - } else if (cpu_is_mx25() && vb->state == VIDEOBUF_ACTIVE) { + if (cpu_is_mx25() && buf->state == MX2_STATE_ACTIVE) { if (pcdev->fb1_active == buf) { pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN; writel(0, pcdev->base_csi + CSIDMASA_FB1); @@ -732,75 +691,178 @@ static void mx2_videobuf_release(struct videobuf_queue *vq, pcdev->fb2_active = NULL; } writel(pcdev->csicr1, pcdev->base_csi + CSICR1); - vb->state = VIDEOBUF_ERROR; } spin_unlock_irqrestore(&pcdev->lock, flags); - - free_buffer(vq, buf); } -static struct videobuf_queue_ops mx2_videobuf_ops = { - .buf_setup = mx2_videobuf_setup, - .buf_prepare = mx2_videobuf_prepare, - .buf_queue = mx2_videobuf_queue, - .buf_release = mx2_videobuf_release, -}; - -static void mx2_camera_init_videobuf(struct videobuf_queue *q, - struct soc_camera_device *icd) +static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, + int bytesperline) { - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct soc_camera_host *ici = + to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; + struct mx2_fmt_cfg *prp = pcdev->emma_prp; - videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev, - &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_NONE, sizeof(struct mx2_buffer), - icd, &icd->video_lock); -} + writel((pcdev->s_width << 16) | pcdev->s_height, + pcdev->base_emma + PRP_SRC_FRAME_SIZE); + writel(prp->cfg.src_pixel, + pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); + if (prp->cfg.channel == 1) { + writel((icd->user_width << 16) | icd->user_height, + pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); + writel(bytesperline, + pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); + writel(prp->cfg.ch1_pixel, + pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); + } else { /* channel 2 */ + writel((icd->user_width << 16) | icd->user_height, + pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + } -#define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \ - V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ - V4L2_MBUS_VSYNC_ACTIVE_LOW | \ - V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ - V4L2_MBUS_HSYNC_ACTIVE_LOW | \ - V4L2_MBUS_PCLK_SAMPLE_RISING | \ - V4L2_MBUS_PCLK_SAMPLE_FALLING | \ - V4L2_MBUS_DATA_ACTIVE_HIGH | \ - V4L2_MBUS_DATA_ACTIVE_LOW) + /* Enable interrupts */ + writel(prp->cfg.irq_flags, pcdev->base_emma + PRP_INTR_CNTL); +} -static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) +static void mx2_prp_resize_commit(struct mx2_camera_dev *pcdev) { - u32 cntl; - int count = 0; + int dir; - cntl = readl(pcdev->base_emma + PRP_CNTL); - writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); - while (count++ < 100) { - if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) - return 0; - barrier(); - udelay(1); - } + for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) { + unsigned char *s = pcdev->resizing[dir].s; + int len = pcdev->resizing[dir].len; + unsigned int coeff[2] = {0, 0}; + unsigned int valid = 0; + int i; - return -ETIMEDOUT; + if (len == 0) + continue; + + for (i = RESIZE_NUM_MAX - 1; i >= 0; i--) { + int j; + + j = i > 9 ? 1 : 0; + coeff[j] = (coeff[j] << BC_COEF) | + (s[i] & (SZ_COEF - 1)); + + if (i == 5 || i == 15) + coeff[j] <<= 1; + + valid = (valid << 1) | (s[i] >> BC_COEF); + } + + valid |= PRP_RZ_VALID_TBL_LEN(len); + + if (pcdev->resizing[dir].algo == RESIZE_ALGO_BILINEAR) + valid |= PRP_RZ_VALID_BILINEAR; + + if (pcdev->emma_prp->cfg.channel == 1) { + if (dir == RESIZE_DIR_H) { + writel(coeff[0], pcdev->base_emma + + PRP_CH1_RZ_HORI_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH1_RZ_HORI_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH1_RZ_HORI_VALID); + } else { + writel(coeff[0], pcdev->base_emma + + PRP_CH1_RZ_VERT_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH1_RZ_VERT_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH1_RZ_VERT_VALID); + } + } else { + if (dir == RESIZE_DIR_H) { + writel(coeff[0], pcdev->base_emma + + PRP_CH2_RZ_HORI_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH2_RZ_HORI_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH2_RZ_HORI_VALID); + } else { + writel(coeff[0], pcdev->base_emma + + PRP_CH2_RZ_VERT_COEF1); + writel(coeff[1], pcdev->base_emma + + PRP_CH2_RZ_VERT_COEF2); + writel(valid, pcdev->base_emma + + PRP_CH2_RZ_VERT_VALID); + } + } + } } -static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, - int bytesperline) +static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) { + struct soc_camera_device *icd = soc_camera_from_vb2q(q); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_fmt_cfg *prp = pcdev->emma_prp; - u32 imgsize = pcdev->icd->user_height * pcdev->icd->user_width; + struct vb2_buffer *vb; + struct mx2_buffer *buf; + unsigned long phys; + int bytesperline; - if (prp->cfg.channel == 1) { - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_DEST_RGB1_PTR); - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_DEST_RGB2_PTR); + if (cpu_is_mx27()) { + unsigned long flags; + if (count < 2) + return -EINVAL; + + spin_lock_irqsave(&pcdev->lock, flags); + + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); + buf->internal.bufnum = 0; + vb = &buf->vb; + buf->state = MX2_STATE_ACTIVE; + + phys = vb2_dma_contig_plane_dma_addr(vb, 0); + mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum); + list_move_tail(pcdev->capture.next, &pcdev->active_bufs); + + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); + buf->internal.bufnum = 1; + vb = &buf->vb; + buf->state = MX2_STATE_ACTIVE; - writel(PRP_CNTL_CH1EN | + phys = vb2_dma_contig_plane_dma_addr(vb, 0); + mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum); + list_move_tail(pcdev->capture.next, &pcdev->active_bufs); + + bytesperline = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + if (bytesperline < 0) + return bytesperline; + + /* + * I didn't manage to properly enable/disable the prp + * on a per frame basis during running transfers, + * thus we allocate a buffer here and use it to + * discard frames when no buffer is available. + * Feel free to work on this ;) + */ + pcdev->discard_size = icd->user_height * bytesperline; + pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, + pcdev->discard_size, &pcdev->discard_buffer_dma, + GFP_KERNEL); + if (!pcdev->discard_buffer) + return -ENOMEM; + + pcdev->buf_discard[0].discard = true; + list_add_tail(&pcdev->buf_discard[0].queue, + &pcdev->discard); + + pcdev->buf_discard[1].discard = true; + list_add_tail(&pcdev->buf_discard[1].queue, + &pcdev->discard); + + mx2_prp_resize_commit(pcdev); + + mx27_camera_emma_buf_init(icd, bytesperline); + + if (prp->cfg.channel == 1) { + writel(PRP_CNTL_CH1EN | PRP_CNTL_CSIEN | prp->cfg.in_fmt | prp->cfg.out_fmt | @@ -809,56 +871,107 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, PRP_CNTL_CH1_TSKIP(0) | PRP_CNTL_IN_TSKIP(0), pcdev->base_emma + PRP_CNTL); + } else { + writel(PRP_CNTL_CH2EN | + PRP_CNTL_CSIEN | + prp->cfg.in_fmt | + prp->cfg.out_fmt | + PRP_CNTL_CH2_LEN | + PRP_CNTL_CH2_TSKIP(0) | + PRP_CNTL_IN_TSKIP(0), + pcdev->base_emma + PRP_CNTL); + } + spin_unlock_irqrestore(&pcdev->lock, flags); + } - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_SRC_FRAME_SIZE); - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); - writel(bytesperline, - pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); - writel(prp->cfg.src_pixel, - pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); - writel(prp->cfg.ch1_pixel, - pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); - } else { /* channel 2 */ - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_DEST_Y_PTR); - writel(pcdev->discard_buffer_dma, - pcdev->base_emma + PRP_SOURCE_Y_PTR); - - if (prp->cfg.out_fmt == PRP_CNTL_CH2_OUT_YUV420) { - writel(pcdev->discard_buffer_dma + imgsize, - pcdev->base_emma + PRP_DEST_CB_PTR); - writel(pcdev->discard_buffer_dma + ((5 * imgsize) / 4), - pcdev->base_emma + PRP_DEST_CR_PTR); - writel(pcdev->discard_buffer_dma + imgsize, - pcdev->base_emma + PRP_SOURCE_CB_PTR); - writel(pcdev->discard_buffer_dma + ((5 * imgsize) / 4), - pcdev->base_emma + PRP_SOURCE_CR_PTR); + return 0; +} + +static int mx2_stop_streaming(struct vb2_queue *q) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(q); + struct soc_camera_host *ici = + to_soc_camera_host(icd->parent); + struct mx2_camera_dev *pcdev = ici->priv; + struct mx2_fmt_cfg *prp = pcdev->emma_prp; + unsigned long flags; + void *b; + u32 cntl; + + if (cpu_is_mx27()) { + spin_lock_irqsave(&pcdev->lock, flags); + + cntl = readl(pcdev->base_emma + PRP_CNTL); + if (prp->cfg.channel == 1) { + writel(cntl & ~PRP_CNTL_CH1EN, + pcdev->base_emma + PRP_CNTL); + } else { + writel(cntl & ~PRP_CNTL_CH2EN, + pcdev->base_emma + PRP_CNTL); } + INIT_LIST_HEAD(&pcdev->capture); + INIT_LIST_HEAD(&pcdev->active_bufs); + INIT_LIST_HEAD(&pcdev->discard); - writel(PRP_CNTL_CH2EN | - PRP_CNTL_CSIEN | - prp->cfg.in_fmt | - prp->cfg.out_fmt | - PRP_CNTL_CH2_LEN | - PRP_CNTL_CH2_TSKIP(0) | - PRP_CNTL_IN_TSKIP(0), - pcdev->base_emma + PRP_CNTL); + b = pcdev->discard_buffer; + pcdev->discard_buffer = NULL; - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_SRC_FRAME_SIZE); + spin_unlock_irqrestore(&pcdev->lock, flags); - writel((icd->user_width << 16) | icd->user_height, - pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + dma_free_coherent(ici->v4l2_dev.dev, + pcdev->discard_size, b, pcdev->discard_buffer_dma); + } - writel(prp->cfg.src_pixel, - pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); + return 0; +} + +static struct vb2_ops mx2_videobuf_ops = { + .queue_setup = mx2_videobuf_setup, + .buf_prepare = mx2_videobuf_prepare, + .buf_queue = mx2_videobuf_queue, + .buf_cleanup = mx2_videobuf_release, + .start_streaming = mx2_start_streaming, + .stop_streaming = mx2_stop_streaming, +}; + +static int mx2_camera_init_videobuf(struct vb2_queue *q, + struct soc_camera_device *icd) +{ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = icd; + q->ops = &mx2_videobuf_ops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct mx2_buffer); + + return vb2_queue_init(q); +} +#define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \ + V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ + V4L2_MBUS_VSYNC_ACTIVE_LOW | \ + V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ + V4L2_MBUS_HSYNC_ACTIVE_LOW | \ + V4L2_MBUS_PCLK_SAMPLE_RISING | \ + V4L2_MBUS_PCLK_SAMPLE_FALLING | \ + V4L2_MBUS_DATA_ACTIVE_HIGH | \ + V4L2_MBUS_DATA_ACTIVE_LOW) + +static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) +{ + u32 cntl; + int count = 0; + + cntl = readl(pcdev->base_emma + PRP_CNTL); + writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); + while (count++ < 100) { + if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) + return 0; + barrier(); + udelay(1); } - /* Enable interrupts */ - writel(prp->cfg.irq_flags, pcdev->base_emma + PRP_INTR_CNTL); + return -ETIMEDOUT; } static int mx2_camera_set_bus_param(struct soc_camera_device *icd) @@ -939,31 +1052,10 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) if (bytesperline < 0) return bytesperline; - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { ret = mx27_camera_emma_prp_reset(pcdev); if (ret) return ret; - - if (pcdev->discard_buffer) - dma_free_coherent(ici->v4l2_dev.dev, - pcdev->discard_size, pcdev->discard_buffer, - pcdev->discard_buffer_dma); - - /* - * I didn't manage to properly enable/disable the prp - * on a per frame basis during running transfers, - * thus we allocate a buffer here and use it to - * discard frames when no buffer is available. - * Feel free to work on this ;) - */ - pcdev->discard_size = icd->user_height * bytesperline; - pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, - pcdev->discard_size, &pcdev->discard_buffer_dma, - GFP_KERNEL); - if (!pcdev->discard_buffer) - return -ENOMEM; - - mx27_camera_emma_buf_init(icd, bytesperline); } else if (cpu_is_mx25()) { writel((bytesperline * icd->user_height) >> 2, pcdev->base_csi + CSIRXCNT); @@ -1052,6 +1144,123 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, return formats; } +static int mx2_emmaprp_resize(struct mx2_camera_dev *pcdev, + struct v4l2_mbus_framefmt *mf_in, + struct v4l2_pix_format *pix_out, bool apply) +{ + int num, den; + unsigned long m; + int i, dir; + + for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) { + struct emma_prp_resize tmprsz; + unsigned char *s = tmprsz.s; + int len = 0; + int in, out; + + if (dir == RESIZE_DIR_H) { + in = mf_in->width; + out = pix_out->width; + } else { + in = mf_in->height; + out = pix_out->height; + } + + if (in < out) + return -EINVAL; + else if (in == out) + continue; + + /* Calculate ratio */ + m = gcd(in, out); + num = in / m; + den = out / m; + if (num > RESIZE_NUM_MAX) + return -EINVAL; + + if ((num >= 2 * den) && (den == 1) && + (num < 9) && (!(num & 0x01))) { + int sum = 0; + int j; + + /* Average scaling for >= 2:1 ratios */ + /* Support can be added for num >=9 and odd values */ + + tmprsz.algo = RESIZE_ALGO_AVERAGING; + len = num; + + for (i = 0; i < (len / 2); i++) + s[i] = 8; + + do { + for (i = 0; i < (len / 2); i++) { + s[i] = s[i] >> 1; + sum = 0; + for (j = 0; j < (len / 2); j++) + sum += s[j]; + if (sum == 4) + break; + } + } while (sum != 4); + + for (i = (len / 2); i < len; i++) + s[i] = s[len - i - 1]; + + s[len - 1] |= SZ_COEF; + } else { + /* bilinear scaling for < 2:1 ratios */ + int v; /* overflow counter */ + int coeff, nxt; /* table output */ + int in_pos_inc = 2 * den; + int out_pos = num; + int out_pos_inc = 2 * num; + int init_carry = num - den; + int carry = init_carry; + + tmprsz.algo = RESIZE_ALGO_BILINEAR; + v = den + in_pos_inc; + do { + coeff = v - out_pos; + out_pos += out_pos_inc; + carry += out_pos_inc; + for (nxt = 0; v < out_pos; nxt++) { + v += in_pos_inc; + carry -= in_pos_inc; + } + + if (len > RESIZE_NUM_MAX) + return -EINVAL; + + coeff = ((coeff << BC_COEF) + + (in_pos_inc >> 1)) / in_pos_inc; + + if (coeff >= (SZ_COEF - 1)) + coeff--; + + coeff |= SZ_COEF; + s[len] = (unsigned char)coeff; + len++; + + for (i = 1; i < nxt; i++) { + if (len >= RESIZE_NUM_MAX) + return -EINVAL; + s[len] = 0; + len++; + } + } while (carry != init_carry); + } + tmprsz.len = len; + if (dir == RESIZE_DIR_H) + mf_in->width = pix_out->width; + else + mf_in->height = pix_out->height; + + if (apply) + memcpy(&pcdev->resizing[dir], &tmprsz, sizeof(tmprsz)); + } + return 0; +} + static int mx2_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { @@ -1063,6 +1272,9 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_mbus_framefmt mf; int ret; + dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", + __func__, pix->width, pix->height); + xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { dev_warn(icd->parent, "Format %x not found\n", @@ -1080,6 +1292,22 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, if (ret < 0 && ret != -ENOIOCTLCMD) return ret; + /* Store width and height returned by the sensor for resizing */ + pcdev->s_width = mf.width; + pcdev->s_height = mf.height; + dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", + __func__, pcdev->s_width, pcdev->s_height); + + pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, + xlate->host_fmt->fourcc); + + memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); + if ((mf.width != pix->width || mf.height != pix->height) && + pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { + if (mx2_emmaprp_resize(pcdev, &mf, pix, true) < 0) + dev_dbg(icd->parent, "%s: can't resize\n", __func__); + } + if (mf.code != xlate->code) return -EINVAL; @@ -1089,9 +1317,8 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, pix->colorspace = mf.colorspace; icd->current_fmt = xlate; - if (mx27_camera_emma(pcdev)) - pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, - xlate->host_fmt->fourcc); + dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", + __func__, pix->width, pix->height); return 0; } @@ -1104,9 +1331,14 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_mbus_framefmt mf; __u32 pixfmt = pix->pixelformat; + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct mx2_camera_dev *pcdev = ici->priv; unsigned int width_limit; int ret; + dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", + __func__, pix->width, pix->height); + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (pixfmt && !xlate) { dev_warn(icd->parent, "Format %x not found\n", pixfmt); @@ -1156,6 +1388,20 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, if (ret < 0) return ret; + dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", + __func__, pcdev->s_width, pcdev->s_height); + + /* If the sensor does not support image size try PrP resizing */ + pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, + xlate->host_fmt->fourcc); + + memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); + if ((mf.width != pix->width || mf.height != pix->height) && + pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { + if (mx2_emmaprp_resize(pcdev, &mf, pix, false) < 0) + dev_dbg(icd->parent, "%s: can't resize\n", __func__); + } + if (mf.field == V4L2_FIELD_ANY) mf.field = V4L2_FIELD_NONE; /* @@ -1174,6 +1420,9 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, pix->field = mf.field; pix->colorspace = mf.colorspace; + dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", + __func__, pix->width, pix->height); + return 0; } @@ -1187,136 +1436,11 @@ static int mx2_camera_querycap(struct soc_camera_host *ici, return 0; } -static int mx2_camera_reqbufs(struct soc_camera_device *icd, - struct v4l2_requestbuffers *p) -{ - int i; - - for (i = 0; i < p->count; i++) { - struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i], - struct mx2_buffer, vb); - INIT_LIST_HEAD(&buf->vb.queue); - } - - return 0; -} - -#ifdef CONFIG_MACH_MX27 -static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state) -{ - struct videobuf_buffer *vb; - struct mx2_buffer *buf; - unsigned long flags; - int ret; - - spin_lock_irqsave(&pcdev->lock, flags); - - if (!pcdev->active) { - dev_err(pcdev->dev, "%s called with no active buffer!\n", - __func__); - goto out; - } - - vb = &pcdev->active->vb; - buf = container_of(vb, struct mx2_buffer, vb); - WARN_ON(list_empty(&vb->queue)); - dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); - - /* _init is used to debug races, see comment in pxa_camera_reqbufs() */ - list_del_init(&vb->queue); - vb->state = state; - do_gettimeofday(&vb->ts); - vb->field_count++; - - wake_up(&vb->done); - - if (list_empty(&pcdev->capture)) { - pcdev->active = NULL; - goto out; - } - - pcdev->active = list_entry(pcdev->capture.next, - struct mx2_buffer, vb.queue); - - vb = &pcdev->active->vb; - vb->state = VIDEOBUF_ACTIVE; - - ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb), - vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ); - - if (ret) { - vb->state = VIDEOBUF_ERROR; - pcdev->active = NULL; - wake_up(&vb->done); - } - -out: - spin_unlock_irqrestore(&pcdev->lock, flags); -} - -static void mx27_camera_dma_err_callback(int channel, void *data, int err) -{ - struct mx2_camera_dev *pcdev = data; - - mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR); -} - -static void mx27_camera_dma_callback(int channel, void *data) -{ - struct mx2_camera_dev *pcdev = data; - - mx27_camera_frame_done(pcdev, VIDEOBUF_DONE); -} - -#define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */ - -static int __devinit mx27_camera_dma_init(struct platform_device *pdev, - struct mx2_camera_dev *pcdev) -{ - int err; - - pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH); - if (pcdev->dma < 0) { - dev_err(&pdev->dev, "%s failed to request DMA channel\n", - __func__); - return pcdev->dma; - } - - err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback, - mx27_camera_dma_err_callback, pcdev); - if (err) { - dev_err(&pdev->dev, "%s failed to set DMA callback\n", - __func__); - goto err_out; - } - - err = imx_dma_config_channel(pcdev->dma, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, - DMA_REQ_CSI_RX, 1); - if (err) { - dev_err(&pdev->dev, "%s failed to config DMA channel\n", - __func__); - goto err_out; - } - - imx_dma_config_burstlen(pcdev->dma, 64); - - return 0; - -err_out: - imx_dma_free(pcdev->dma); - - return err; -} -#endif /* CONFIG_MACH_MX27 */ - static unsigned int mx2_camera_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; - return videobuf_poll_stream(file, &icd->vb_vidq, pt); + return vb2_poll(&icd->vb2_vidq, file, pt); } static struct soc_camera_host_ops mx2_soc_camera_host_ops = { @@ -1327,144 +1451,148 @@ static struct soc_camera_host_ops mx2_soc_camera_host_ops = { .set_crop = mx2_camera_set_crop, .get_formats = mx2_camera_get_formats, .try_fmt = mx2_camera_try_fmt, - .init_videobuf = mx2_camera_init_videobuf, - .reqbufs = mx2_camera_reqbufs, + .init_videobuf2 = mx2_camera_init_videobuf, .poll = mx2_camera_poll, .querycap = mx2_camera_querycap, .set_bus_param = mx2_camera_set_bus_param, }; static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev, - int bufnum, int state) + int bufnum, bool err) { - u32 imgsize = pcdev->icd->user_height * pcdev->icd->user_width; +#ifdef DEBUG struct mx2_fmt_cfg *prp = pcdev->emma_prp; +#endif + struct mx2_buf_internal *ibuf; struct mx2_buffer *buf; - struct videobuf_buffer *vb; + struct vb2_buffer *vb; unsigned long phys; - if (!list_empty(&pcdev->active_bufs)) { - buf = list_entry(pcdev->active_bufs.next, - struct mx2_buffer, vb.queue); + ibuf = list_first_entry(&pcdev->active_bufs, struct mx2_buf_internal, + queue); + + BUG_ON(ibuf->bufnum != bufnum); - BUG_ON(buf->bufnum != bufnum); + if (ibuf->discard) { + /* + * Discard buffer must not be returned to user space. + * Just return it to the discard queue. + */ + list_move_tail(pcdev->active_bufs.next, &pcdev->discard); + } else { + buf = mx2_ibuf_to_buf(ibuf); vb = &buf->vb; #ifdef DEBUG - phys = videobuf_to_dma_contig(vb); + phys = vb2_dma_contig_plane_dma_addr(vb, 0); if (prp->cfg.channel == 1) { if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum) != phys) { - dev_err(pcdev->dev, "%p != %p\n", phys, - readl(pcdev->base_emma + - PRP_DEST_RGB1_PTR + - 4 * bufnum)); + dev_err(pcdev->dev, "%lx != %x\n", phys, + readl(pcdev->base_emma + + PRP_DEST_RGB1_PTR + 4 * bufnum)); } } else { if (readl(pcdev->base_emma + PRP_DEST_Y_PTR - 0x14 * bufnum) != phys) { - dev_err(pcdev->dev, "%p != %p\n", phys, - readl(pcdev->base_emma + - PRP_DEST_Y_PTR - - 0x14 * bufnum)); + dev_err(pcdev->dev, "%lx != %x\n", phys, + readl(pcdev->base_emma + + PRP_DEST_Y_PTR - 0x14 * bufnum)); } } #endif - dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, - vb->baddr, vb->bsize); + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, vb, + vb2_plane_vaddr(vb, 0), + vb2_get_plane_payload(vb, 0)); - list_del(&vb->queue); - vb->state = state; - do_gettimeofday(&vb->ts); - vb->field_count = pcdev->frame_count * 2; - pcdev->frame_count++; - - wake_up(&vb->done); + list_del_init(&buf->internal.queue); + do_gettimeofday(&vb->v4l2_buf.timestamp); + vb->v4l2_buf.sequence = pcdev->frame_count; + if (err) + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); + else + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); } + pcdev->frame_count++; + if (list_empty(&pcdev->capture)) { - if (prp->cfg.channel == 1) { - writel(pcdev->discard_buffer_dma, pcdev->base_emma + - PRP_DEST_RGB1_PTR + 4 * bufnum); - } else { - writel(pcdev->discard_buffer_dma, pcdev->base_emma + - PRP_DEST_Y_PTR - - 0x14 * bufnum); - if (prp->out_fmt == V4L2_PIX_FMT_YUV420) { - writel(pcdev->discard_buffer_dma + imgsize, - pcdev->base_emma + PRP_DEST_CB_PTR - - 0x14 * bufnum); - writel(pcdev->discard_buffer_dma + - ((5 * imgsize) / 4), pcdev->base_emma + - PRP_DEST_CR_PTR - 0x14 * bufnum); - } + if (list_empty(&pcdev->discard)) { + dev_warn(pcdev->dev, "%s: trying to access empty discard list\n", + __func__); + return; } + + ibuf = list_first_entry(&pcdev->discard, + struct mx2_buf_internal, queue); + ibuf->bufnum = bufnum; + + list_move_tail(pcdev->discard.next, &pcdev->active_bufs); + mx27_update_emma_buf(pcdev, pcdev->discard_buffer_dma, bufnum); return; } - buf = list_entry(pcdev->capture.next, - struct mx2_buffer, vb.queue); + buf = list_first_entry(&pcdev->capture, struct mx2_buffer, + internal.queue); - buf->bufnum = !bufnum; + buf->internal.bufnum = bufnum; list_move_tail(pcdev->capture.next, &pcdev->active_bufs); vb = &buf->vb; - vb->state = VIDEOBUF_ACTIVE; + buf->state = MX2_STATE_ACTIVE; - phys = videobuf_to_dma_contig(vb); - if (prp->cfg.channel == 1) { - writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum); - } else { - writel(phys, pcdev->base_emma + - PRP_DEST_Y_PTR - 0x14 * bufnum); - if (prp->cfg.out_fmt == PRP_CNTL_CH2_OUT_YUV420) { - writel(phys + imgsize, pcdev->base_emma + - PRP_DEST_CB_PTR - 0x14 * bufnum); - writel(phys + ((5 * imgsize) / 4), pcdev->base_emma + - PRP_DEST_CR_PTR - 0x14 * bufnum); - } - } + phys = vb2_dma_contig_plane_dma_addr(vb, 0); + mx27_update_emma_buf(pcdev, phys, bufnum); } static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data) { struct mx2_camera_dev *pcdev = data; unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS); - struct mx2_buffer *buf; + struct mx2_buf_internal *ibuf; + + spin_lock(&pcdev->lock); + + if (list_empty(&pcdev->active_bufs)) { + dev_warn(pcdev->dev, "%s: called while active list is empty\n", + __func__); + + if (!status) { + spin_unlock(&pcdev->lock); + return IRQ_NONE; + } + } if (status & (1 << 7)) { /* overflow */ - u32 cntl; - /* - * We only disable channel 1 here since this is the only - * enabled channel - * - * FIXME: the correct DMA overflow handling should be resetting - * the buffer, returning an error frame, and continuing with - * the next one. - */ - cntl = readl(pcdev->base_emma + PRP_CNTL); + u32 cntl = readl(pcdev->base_emma + PRP_CNTL); writel(cntl & ~(PRP_CNTL_CH1EN | PRP_CNTL_CH2EN), pcdev->base_emma + PRP_CNTL); writel(cntl, pcdev->base_emma + PRP_CNTL); - } - if ((((status & (3 << 5)) == (3 << 5)) || - ((status & (3 << 3)) == (3 << 3))) - && !list_empty(&pcdev->active_bufs)) { + + ibuf = list_first_entry(&pcdev->active_bufs, + struct mx2_buf_internal, queue); + mx27_camera_frame_done_emma(pcdev, + ibuf->bufnum, true); + + status &= ~(1 << 7); + } else if (((status & (3 << 5)) == (3 << 5)) || + ((status & (3 << 3)) == (3 << 3))) { /* * Both buffers have triggered, process the one we're expecting * to first */ - buf = list_entry(pcdev->active_bufs.next, - struct mx2_buffer, vb.queue); - mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE); - status &= ~(1 << (6 - buf->bufnum)); /* mark processed */ + ibuf = list_first_entry(&pcdev->active_bufs, + struct mx2_buf_internal, queue); + mx27_camera_frame_done_emma(pcdev, ibuf->bufnum, false); + status &= ~(1 << (6 - ibuf->bufnum)); /* mark processed */ + } else if ((status & (1 << 6)) || (status & (1 << 4))) { + mx27_camera_frame_done_emma(pcdev, 0, false); + } else if ((status & (1 << 5)) || (status & (1 << 3))) { + mx27_camera_frame_done_emma(pcdev, 1, false); } - if ((status & (1 << 6)) || (status & (1 << 4))) - mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE); - if ((status & (1 << 5)) || (status & (1 << 3))) - mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE); + spin_unlock(&pcdev->lock); writel(status, pcdev->base_emma + PRP_INTRSTATUS); return IRQ_HANDLED; @@ -1527,8 +1655,6 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) struct resource *res_csi, *res_emma; void __iomem *base_csi; int irq_csi, irq_emma; - irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq - : mx27_camera_irq; int err = 0; dev_dbg(&pdev->dev, "initialising\n"); @@ -1550,22 +1676,11 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->clk_csi = clk_get(&pdev->dev, NULL); if (IS_ERR(pcdev->clk_csi)) { + dev_err(&pdev->dev, "Could not get csi clock\n"); err = PTR_ERR(pcdev->clk_csi); goto exit_kfree; } - dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n", - clk_get_rate(pcdev->clk_csi)); - - /* Initialize DMA */ -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) { - err = mx27_camera_dma_init(pdev, pcdev); - if (err) - goto exit_clk_put; - } -#endif /* CONFIG_MACH_MX27 */ - pcdev->res_csi = res_csi; pcdev->pdata = pdev->dev.platform_data; if (pcdev->pdata) { @@ -1585,6 +1700,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) INIT_LIST_HEAD(&pcdev->capture); INIT_LIST_HEAD(&pcdev->active_bufs); + INIT_LIST_HEAD(&pcdev->discard); spin_lock_init(&pcdev->lock); /* @@ -1606,11 +1722,13 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->base_dma = res_csi->start; pcdev->dev = &pdev->dev; - err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0, - MX2_CAM_DRV_NAME, pcdev); - if (err) { - dev_err(pcdev->dev, "Camera interrupt register failed \n"); - goto exit_iounmap; + if (cpu_is_mx25()) { + err = request_irq(pcdev->irq_csi, mx25_camera_irq, 0, + MX2_CAM_DRV_NAME, pcdev); + if (err) { + dev_err(pcdev->dev, "Camera interrupt register failed \n"); + goto exit_iounmap; + } } if (cpu_is_mx27()) { @@ -1618,14 +1736,15 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); irq_emma = platform_get_irq(pdev, 1); - if (res_emma && irq_emma >= 0) { - dev_info(&pdev->dev, "Using EMMA\n"); - pcdev->use_emma = 1; - pcdev->res_emma = res_emma; - pcdev->irq_emma = irq_emma; - if (mx27_camera_emma_init(pcdev)) - goto exit_free_irq; + if (!res_emma || !irq_emma) { + dev_err(&pdev->dev, "no EMMA resources\n"); + goto exit_free_irq; } + + pcdev->res_emma = res_emma; + pcdev->irq_emma = irq_emma; + if (mx27_camera_emma_init(pcdev)) + goto exit_free_irq; } pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME, @@ -1633,6 +1752,12 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->soc_host.priv = pcdev; pcdev->soc_host.v4l2_dev.dev = &pdev->dev; pcdev->soc_host.nr = pdev->id; + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + err = PTR_ERR(pcdev->alloc_ctx); + goto eallocctx; + } err = soc_camera_host_register(&pcdev->soc_host); if (err) goto exit_free_emma; @@ -1643,26 +1768,24 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) return 0; exit_free_emma: - if (mx27_camera_emma(pcdev)) { + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +eallocctx: + if (cpu_is_mx27()) { free_irq(pcdev->irq_emma, pcdev); clk_disable(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); - release_mem_region(res_emma->start, resource_size(res_emma)); + release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); } exit_free_irq: - free_irq(pcdev->irq_csi, pcdev); + if (cpu_is_mx25()) + free_irq(pcdev->irq_csi, pcdev); exit_iounmap: iounmap(base_csi); exit_release: release_mem_region(res_csi->start, resource_size(res_csi)); exit_dma_free: -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - imx_dma_free(pcdev->dma); -exit_clk_put: clk_put(pcdev->clk_csi); -#endif /* CONFIG_MACH_MX27 */ exit_kfree: kfree(pcdev); exit: @@ -1677,19 +1800,18 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) struct resource *res; clk_put(pcdev->clk_csi); -#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx25()) + free_irq(pcdev->irq_csi, pcdev); if (cpu_is_mx27()) - imx_dma_free(pcdev->dma); -#endif /* CONFIG_MACH_MX27 */ - free_irq(pcdev->irq_csi, pcdev); - if (mx27_camera_emma(pcdev)) free_irq(pcdev->irq_emma, pcdev); soc_camera_host_unregister(&pcdev->soc_host); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + iounmap(pcdev->base_csi); - if (mx27_camera_emma(pcdev)) { + if (cpu_is_mx27()) { clk_disable(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); diff --git a/drivers/media/video/mx2_emmaprp.c b/drivers/media/video/mx2_emmaprp.c new file mode 100644 index 000000000000..ba89a7401c8c --- /dev/null +++ b/drivers/media/video/mx2_emmaprp.c @@ -0,0 +1,1008 @@ +/* + * Support eMMa-PrP through mem2mem framework. + * + * eMMa-PrP is a piece of HW that allows fetching buffers + * from one memory location and do several operations on + * them such as scaling or format conversion giving, as a result + * a new processed buffer in another memory location. + * + * Based on mem2mem_testdev.c by Pawel Osciak. + * + * Copyright (c) 2011 Vista Silicon S.L. + * Javier Martin <javier.martin@vista-silicon.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <linux/platform_device.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-dma-contig.h> +#include <asm/sizes.h> + +#define EMMAPRP_MODULE_NAME "mem2mem-emmaprp" + +MODULE_DESCRIPTION("Mem-to-mem device which supports eMMa-PrP present in mx2 SoCs"); +MODULE_AUTHOR("Javier Martin <javier.martin@vista-silicon.com"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.1"); + +static bool debug; +module_param(debug, bool, 0644); + +#define MIN_W 32 +#define MIN_H 32 +#define MAX_W 2040 +#define MAX_H 2046 + +#define S_ALIGN 1 /* multiple of 2 */ +#define W_ALIGN_YUV420 3 /* multiple of 8 */ +#define W_ALIGN_OTHERS 2 /* multiple of 4 */ +#define H_ALIGN 1 /* multiple of 2 */ + +/* Flags that indicate a format can be used for capture/output */ +#define MEM2MEM_CAPTURE (1 << 0) +#define MEM2MEM_OUTPUT (1 << 1) + +#define MEM2MEM_NAME "m2m-emmaprp" + +/* In bytes, per queue */ +#define MEM2MEM_VID_MEM_LIMIT SZ_16M + +#define dprintk(dev, fmt, arg...) \ + v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg) + +/* EMMA PrP */ +#define PRP_CNTL 0x00 +#define PRP_INTR_CNTL 0x04 +#define PRP_INTRSTATUS 0x08 +#define PRP_SOURCE_Y_PTR 0x0c +#define PRP_SOURCE_CB_PTR 0x10 +#define PRP_SOURCE_CR_PTR 0x14 +#define PRP_DEST_RGB1_PTR 0x18 +#define PRP_DEST_RGB2_PTR 0x1c +#define PRP_DEST_Y_PTR 0x20 +#define PRP_DEST_CB_PTR 0x24 +#define PRP_DEST_CR_PTR 0x28 +#define PRP_SRC_FRAME_SIZE 0x2c +#define PRP_DEST_CH1_LINE_STRIDE 0x30 +#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34 +#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38 +#define PRP_CH1_OUT_IMAGE_SIZE 0x3c +#define PRP_CH2_OUT_IMAGE_SIZE 0x40 +#define PRP_SRC_LINE_STRIDE 0x44 +#define PRP_CSC_COEF_012 0x48 +#define PRP_CSC_COEF_345 0x4c +#define PRP_CSC_COEF_678 0x50 +#define PRP_CH1_RZ_HORI_COEF1 0x54 +#define PRP_CH1_RZ_HORI_COEF2 0x58 +#define PRP_CH1_RZ_HORI_VALID 0x5c +#define PRP_CH1_RZ_VERT_COEF1 0x60 +#define PRP_CH1_RZ_VERT_COEF2 0x64 +#define PRP_CH1_RZ_VERT_VALID 0x68 +#define PRP_CH2_RZ_HORI_COEF1 0x6c +#define PRP_CH2_RZ_HORI_COEF2 0x70 +#define PRP_CH2_RZ_HORI_VALID 0x74 +#define PRP_CH2_RZ_VERT_COEF1 0x78 +#define PRP_CH2_RZ_VERT_COEF2 0x7c +#define PRP_CH2_RZ_VERT_VALID 0x80 + +#define PRP_CNTL_CH1EN (1 << 0) +#define PRP_CNTL_CH2EN (1 << 1) +#define PRP_CNTL_CSIEN (1 << 2) +#define PRP_CNTL_DATA_IN_YUV420 (0 << 3) +#define PRP_CNTL_DATA_IN_YUV422 (1 << 3) +#define PRP_CNTL_DATA_IN_RGB16 (2 << 3) +#define PRP_CNTL_DATA_IN_RGB32 (3 << 3) +#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5) +#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5) +#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5) +#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5) +#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7) +#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7) +#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7) +#define PRP_CNTL_CH1_LEN (1 << 9) +#define PRP_CNTL_CH2_LEN (1 << 10) +#define PRP_CNTL_SKIP_FRAME (1 << 11) +#define PRP_CNTL_SWRST (1 << 12) +#define PRP_CNTL_CLKEN (1 << 13) +#define PRP_CNTL_WEN (1 << 14) +#define PRP_CNTL_CH1BYP (1 << 15) +#define PRP_CNTL_IN_TSKIP(x) ((x) << 16) +#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19) +#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22) +#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25) +#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27) +#define PRP_CNTL_CH2B1EN (1 << 29) +#define PRP_CNTL_CH2B2EN (1 << 30) +#define PRP_CNTL_CH2FEN (1 << 31) + +#define PRP_SIZE_HEIGHT(x) (x) +#define PRP_SIZE_WIDTH(x) ((x) << 16) + +/* IRQ Enable and status register */ +#define PRP_INTR_RDERR (1 << 0) +#define PRP_INTR_CH1WERR (1 << 1) +#define PRP_INTR_CH2WERR (1 << 2) +#define PRP_INTR_CH1FC (1 << 3) +#define PRP_INTR_CH2FC (1 << 5) +#define PRP_INTR_LBOVF (1 << 7) +#define PRP_INTR_CH2OVF (1 << 8) + +#define PRP_INTR_ST_RDERR (1 << 0) +#define PRP_INTR_ST_CH1WERR (1 << 1) +#define PRP_INTR_ST_CH2WERR (1 << 2) +#define PRP_INTR_ST_CH2B2CI (1 << 3) +#define PRP_INTR_ST_CH2B1CI (1 << 4) +#define PRP_INTR_ST_CH1B2CI (1 << 5) +#define PRP_INTR_ST_CH1B1CI (1 << 6) +#define PRP_INTR_ST_LBOVF (1 << 7) +#define PRP_INTR_ST_CH2OVF (1 << 8) + +struct emmaprp_fmt { + char *name; + u32 fourcc; + /* Types the format can be used for */ + u32 types; +}; + +static struct emmaprp_fmt formats[] = { + { + .name = "YUV 4:2:0 Planar", + .fourcc = V4L2_PIX_FMT_YUV420, + .types = MEM2MEM_CAPTURE, + }, + { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .types = MEM2MEM_OUTPUT, + }, +}; + +/* Per-queue, driver-specific private data */ +struct emmaprp_q_data { + unsigned int width; + unsigned int height; + unsigned int sizeimage; + struct emmaprp_fmt *fmt; +}; + +enum { + V4L2_M2M_SRC = 0, + V4L2_M2M_DST = 1, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +static struct emmaprp_fmt *find_format(struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &formats[k]; + if (fmt->fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == NUM_FORMATS) + return NULL; + + return &formats[k]; +} + +struct emmaprp_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd; + + struct mutex dev_mutex; + spinlock_t irqlock; + + int irq_emma; + void __iomem *base_emma; + struct clk *clk_emma; + struct resource *res_emma; + + struct v4l2_m2m_dev *m2m_dev; + struct vb2_alloc_ctx *alloc_ctx; +}; + +struct emmaprp_ctx { + struct emmaprp_dev *dev; + /* Abort requested by m2m */ + int aborting; + struct emmaprp_q_data q_data[2]; + struct v4l2_m2m_ctx *m2m_ctx; +}; + +static struct emmaprp_q_data *get_q_data(struct emmaprp_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &(ctx->q_data[V4L2_M2M_SRC]); + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &(ctx->q_data[V4L2_M2M_DST]); + default: + BUG(); + } + return NULL; +} + +/* + * mem2mem callbacks + */ +static void emmaprp_job_abort(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + + ctx->aborting = 1; + + dprintk(pcdev, "Aborting task\n"); + + v4l2_m2m_job_finish(pcdev->m2m_dev, ctx->m2m_ctx); +} + +static void emmaprp_lock(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + mutex_lock(&pcdev->dev_mutex); +} + +static void emmaprp_unlock(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_dev *pcdev = ctx->dev; + mutex_unlock(&pcdev->dev_mutex); +} + +static inline void emmaprp_dump_regs(struct emmaprp_dev *pcdev) +{ + dprintk(pcdev, + "eMMa-PrP Registers:\n" + " SOURCE_Y_PTR = 0x%08X\n" + " SRC_FRAME_SIZE = 0x%08X\n" + " DEST_Y_PTR = 0x%08X\n" + " DEST_CR_PTR = 0x%08X\n" + " DEST_CB_PTR = 0x%08X\n" + " CH2_OUT_IMAGE_SIZE = 0x%08X\n" + " CNTL = 0x%08X\n", + readl(pcdev->base_emma + PRP_SOURCE_Y_PTR), + readl(pcdev->base_emma + PRP_SRC_FRAME_SIZE), + readl(pcdev->base_emma + PRP_DEST_Y_PTR), + readl(pcdev->base_emma + PRP_DEST_CR_PTR), + readl(pcdev->base_emma + PRP_DEST_CB_PTR), + readl(pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE), + readl(pcdev->base_emma + PRP_CNTL)); +} + +static void emmaprp_device_run(void *priv) +{ + struct emmaprp_ctx *ctx = priv; + struct emmaprp_q_data *s_q_data, *d_q_data; + struct vb2_buffer *src_buf, *dst_buf; + struct emmaprp_dev *pcdev = ctx->dev; + unsigned int s_width, s_height; + unsigned int d_width, d_height; + unsigned int d_size; + dma_addr_t p_in, p_out; + u32 tmp; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); + s_width = s_q_data->width; + s_height = s_q_data->height; + + d_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + d_width = d_q_data->width; + d_height = d_q_data->height; + d_size = d_width * d_height; + + p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0); + p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + if (!p_in || !p_out) { + v4l2_err(&pcdev->v4l2_dev, + "Acquiring kernel pointers to buffers failed\n"); + return; + } + + /* Input frame parameters */ + writel(p_in, pcdev->base_emma + PRP_SOURCE_Y_PTR); + writel(PRP_SIZE_WIDTH(s_width) | PRP_SIZE_HEIGHT(s_height), + pcdev->base_emma + PRP_SRC_FRAME_SIZE); + + /* Output frame parameters */ + writel(p_out, pcdev->base_emma + PRP_DEST_Y_PTR); + writel(p_out + d_size, pcdev->base_emma + PRP_DEST_CB_PTR); + writel(p_out + d_size + (d_size >> 2), + pcdev->base_emma + PRP_DEST_CR_PTR); + writel(PRP_SIZE_WIDTH(d_width) | PRP_SIZE_HEIGHT(d_height), + pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); + + /* IRQ configuration */ + tmp = readl(pcdev->base_emma + PRP_INTR_CNTL); + writel(tmp | PRP_INTR_RDERR | + PRP_INTR_CH2WERR | + PRP_INTR_CH2FC, + pcdev->base_emma + PRP_INTR_CNTL); + + emmaprp_dump_regs(pcdev); + + /* Enable transfer */ + tmp = readl(pcdev->base_emma + PRP_CNTL); + writel(tmp | PRP_CNTL_CH2_OUT_YUV420 | + PRP_CNTL_DATA_IN_YUV422 | + PRP_CNTL_CH2EN, + pcdev->base_emma + PRP_CNTL); +} + +static irqreturn_t emmaprp_irq(int irq_emma, void *data) +{ + struct emmaprp_dev *pcdev = data; + struct emmaprp_ctx *curr_ctx; + struct vb2_buffer *src_vb, *dst_vb; + unsigned long flags; + u32 irqst; + + /* Check irq flags and clear irq */ + irqst = readl(pcdev->base_emma + PRP_INTRSTATUS); + writel(irqst, pcdev->base_emma + PRP_INTRSTATUS); + dprintk(pcdev, "irqst = 0x%08x\n", irqst); + + curr_ctx = v4l2_m2m_get_curr_priv(pcdev->m2m_dev); + if (curr_ctx == NULL) { + pr_err("Instance released before the end of transaction\n"); + return IRQ_HANDLED; + } + + if (!curr_ctx->aborting) { + if ((irqst & PRP_INTR_ST_RDERR) || + (irqst & PRP_INTR_ST_CH2WERR)) { + pr_err("PrP bus error ocurred, this transfer is probably corrupted\n"); + writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); + } else if (irqst & PRP_INTR_ST_CH2B1CI) { /* buffer ready */ + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + + spin_lock_irqsave(&pcdev->irqlock, flags); + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + spin_unlock_irqrestore(&pcdev->irqlock, flags); + } + } + + v4l2_m2m_job_finish(pcdev->m2m_dev, curr_ctx->m2m_ctx); + return IRQ_HANDLED; +} + +/* + * video ioctls + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); + strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT + | V4L2_CAP_STREAMING; + + return 0; +} + +static int enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + int i, num; + struct emmaprp_fmt *fmt; + + num = 0; + + for (i = 0; i < NUM_FORMATS; ++i) { + if (formats[i].types & type) { + /* index-th format of type type found ? */ + if (num == f->index) + break; + /* Correct type but haven't reached our index yet, + * just increment per-type index */ + ++num; + } + } + + if (i < NUM_FORMATS) { + /* Format found */ + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description) - 1); + f->pixelformat = fmt->fourcc; + return 0; + } + + /* Format not found */ + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_CAPTURE); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return enum_fmt(f, MEM2MEM_OUTPUT); +} + +static int vidioc_g_fmt(struct emmaprp_ctx *ctx, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct emmaprp_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + + f->fmt.pix.width = q_data->width; + f->fmt.pix.height = q_data->height; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = q_data->fmt->fourcc; + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) + f->fmt.pix.bytesperline = q_data->width * 3 / 2; + else /* YUYV */ + f->fmt.pix.bytesperline = q_data->width * 2; + f->fmt.pix.sizeimage = q_data->sizeimage; + + return 0; +} + +static int vidioc_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + return vidioc_g_fmt(priv, f); +} + +static int vidioc_try_fmt(struct v4l2_format *f) +{ + enum v4l2_field field; + + + if (!find_format(f)) + return -EINVAL; + + field = f->fmt.pix.field; + if (field == V4L2_FIELD_ANY) + field = V4L2_FIELD_NONE; + else if (V4L2_FIELD_NONE != field) + return -EINVAL; + + /* V4L2 specification suggests the driver corrects the format struct + * if any of the dimensions is unsupported */ + f->fmt.pix.field = field; + + if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_YUV420) { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN_YUV420, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = f->fmt.pix.width * 3 / 2; + } else { + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, + W_ALIGN_OTHERS, &f->fmt.pix.height, + MIN_H, MAX_H, H_ALIGN, S_ALIGN); + f->fmt.pix.bytesperline = f->fmt.pix.width * 2; + } + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + struct emmaprp_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + return vidioc_try_fmt(f); +} + +static int vidioc_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct emmaprp_fmt *fmt; + struct emmaprp_ctx *ctx = priv; + + fmt = find_format(f); + if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) { + v4l2_err(&ctx->dev->v4l2_dev, + "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + return vidioc_try_fmt(f); +} + +static int vidioc_s_fmt(struct emmaprp_ctx *ctx, struct v4l2_format *f) +{ + struct emmaprp_q_data *q_data; + struct vb2_queue *vq; + int ret; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + ret = vidioc_try_fmt(f); + if (ret) + return ret; + + q_data->fmt = find_format(f); + q_data->width = f->fmt.pix.width; + q_data->height = f->fmt.pix.height; + if (q_data->fmt->fourcc == V4L2_PIX_FMT_YUV420) + q_data->sizeimage = q_data->width * q_data->height * 3 / 2; + else /* YUYV */ + q_data->sizeimage = q_data->width * q_data->height * 2; + + dprintk(ctx->dev, + "Setting format for type %d, wxh: %dx%d, fmt: %d\n", + f->type, q_data->width, q_data->height, q_data->fmt->fourcc); + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(priv, f); +} + +static int vidioc_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = vidioc_try_fmt_vid_out(file, priv, f); + if (ret) + return ret; + + return vidioc_s_fmt(priv, f); +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct emmaprp_ctx *ctx = priv; + + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops emmaprp_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vidioc_g_fmt_vid_out, + .vidioc_try_fmt_vid_out = vidioc_try_fmt_vid_out, + .vidioc_s_fmt_vid_out = vidioc_s_fmt_vid_out, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + + +/* + * Queue operations + */ +static int emmaprp_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vq); + struct emmaprp_q_data *q_data; + unsigned int size, count = *nbuffers; + + q_data = get_q_data(ctx, vq->type); + + if (q_data->fmt->fourcc == V4L2_PIX_FMT_YUV420) + size = q_data->width * q_data->height * 3 / 2; + else + size = q_data->width * q_data->height * 2; + + while (size * count > MEM2MEM_VID_MEM_LIMIT) + (count)--; + + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; + + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); + + return 0; +} + +static int emmaprp_buf_prepare(struct vb2_buffer *vb) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct emmaprp_q_data *q_data; + + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); + + q_data = get_q_data(ctx, vb->vb2_queue->type); + + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane" + "(%lu < %lu)\n", __func__, + vb2_plane_size(vb, 0), + (long)q_data->sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, q_data->sizeimage); + + return 0; +} + +static void emmaprp_buf_queue(struct vb2_buffer *vb) +{ + struct emmaprp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + +static struct vb2_ops emmaprp_qops = { + .queue_setup = emmaprp_queue_setup, + .buf_prepare = emmaprp_buf_prepare, + .buf_queue = emmaprp_buf_queue, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct emmaprp_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &emmaprp_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &emmaprp_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int emmaprp_open(struct file *file) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx; + + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + file->private_data = ctx; + ctx->dev = pcdev; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(pcdev->m2m_dev, ctx, &queue_init); + + if (IS_ERR(ctx->m2m_ctx)) { + int ret = PTR_ERR(ctx->m2m_ctx); + + kfree(ctx); + return ret; + } + + clk_enable(pcdev->clk_emma); + ctx->q_data[V4L2_M2M_SRC].fmt = &formats[1]; + ctx->q_data[V4L2_M2M_DST].fmt = &formats[0]; + + dprintk(pcdev, "Created instance %p, m2m_ctx: %p\n", ctx, ctx->m2m_ctx); + + return 0; +} + +static int emmaprp_release(struct file *file) +{ + struct emmaprp_dev *pcdev = video_drvdata(file); + struct emmaprp_ctx *ctx = file->private_data; + + dprintk(pcdev, "Releasing instance %p\n", ctx); + + clk_disable(pcdev->clk_emma); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + kfree(ctx); + + return 0; +} + +static unsigned int emmaprp_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct emmaprp_ctx *ctx = file->private_data; + + return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); +} + +static int emmaprp_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct emmaprp_ctx *ctx = file->private_data; + + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static const struct v4l2_file_operations emmaprp_fops = { + .owner = THIS_MODULE, + .open = emmaprp_open, + .release = emmaprp_release, + .poll = emmaprp_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = emmaprp_mmap, +}; + +static struct video_device emmaprp_videodev = { + .name = MEM2MEM_NAME, + .fops = &emmaprp_fops, + .ioctl_ops = &emmaprp_ioctl_ops, + .minor = -1, + .release = video_device_release, +}; + +static struct v4l2_m2m_ops m2m_ops = { + .device_run = emmaprp_device_run, + .job_abort = emmaprp_job_abort, + .lock = emmaprp_lock, + .unlock = emmaprp_unlock, +}; + +static int emmaprp_probe(struct platform_device *pdev) +{ + struct emmaprp_dev *pcdev; + struct video_device *vfd; + struct resource *res_emma; + int irq_emma; + int ret; + + pcdev = kzalloc(sizeof *pcdev, GFP_KERNEL); + if (!pcdev) + return -ENOMEM; + + spin_lock_init(&pcdev->irqlock); + + pcdev->clk_emma = clk_get(&pdev->dev, NULL); + if (IS_ERR(pcdev->clk_emma)) { + ret = PTR_ERR(pcdev->clk_emma); + goto free_dev; + } + + irq_emma = platform_get_irq(pdev, 0); + res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (irq_emma < 0 || res_emma == NULL) { + dev_err(&pdev->dev, "Missing platform resources data\n"); + ret = -ENODEV; + goto free_clk; + } + + ret = v4l2_device_register(&pdev->dev, &pcdev->v4l2_dev); + if (ret) + goto free_clk; + + mutex_init(&pcdev->dev_mutex); + + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&pcdev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_dev; + } + + *vfd = emmaprp_videodev; + vfd->lock = &pcdev->dev_mutex; + + video_set_drvdata(vfd, pcdev); + snprintf(vfd->name, sizeof(vfd->name), "%s", emmaprp_videodev.name); + pcdev->vfd = vfd; + v4l2_info(&pcdev->v4l2_dev, EMMAPRP_MODULE_NAME + " Device registered as /dev/video%d\n", vfd->num); + + platform_set_drvdata(pdev, pcdev); + + if (devm_request_mem_region(&pdev->dev, res_emma->start, + resource_size(res_emma), MEM2MEM_NAME) == NULL) + goto rel_vdev; + + pcdev->base_emma = devm_ioremap(&pdev->dev, res_emma->start, + resource_size(res_emma)); + if (!pcdev->base_emma) + goto rel_vdev; + + pcdev->irq_emma = irq_emma; + pcdev->res_emma = res_emma; + + if (devm_request_irq(&pdev->dev, pcdev->irq_emma, emmaprp_irq, + 0, MEM2MEM_NAME, pcdev) < 0) + goto rel_vdev; + + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to alloc vb2 context\n"); + ret = PTR_ERR(pcdev->alloc_ctx); + goto rel_vdev; + } + + pcdev->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(pcdev->m2m_dev)) { + v4l2_err(&pcdev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(pcdev->m2m_dev); + goto rel_ctx; + } + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&pcdev->v4l2_dev, "Failed to register video device\n"); + goto rel_m2m; + } + + return 0; + + +rel_m2m: + v4l2_m2m_release(pcdev->m2m_dev); +rel_ctx: + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); +rel_vdev: + video_device_release(vfd); +unreg_dev: + v4l2_device_unregister(&pcdev->v4l2_dev); +free_clk: + clk_put(pcdev->clk_emma); +free_dev: + kfree(pcdev); + + return ret; +} + +static int emmaprp_remove(struct platform_device *pdev) +{ + struct emmaprp_dev *pcdev = platform_get_drvdata(pdev); + + v4l2_info(&pcdev->v4l2_dev, "Removing " EMMAPRP_MODULE_NAME); + + video_unregister_device(pcdev->vfd); + v4l2_m2m_release(pcdev->m2m_dev); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); + v4l2_device_unregister(&pcdev->v4l2_dev); + clk_put(pcdev->clk_emma); + kfree(pcdev); + + return 0; +} + +static struct platform_driver emmaprp_pdrv = { + .probe = emmaprp_probe, + .remove = emmaprp_remove, + .driver = { + .name = MEM2MEM_NAME, + .owner = THIS_MODULE, + }, +}; + +static void __exit emmaprp_exit(void) +{ + platform_driver_unregister(&emmaprp_pdrv); +} + +static int __init emmaprp_init(void) +{ + return platform_driver_register(&emmaprp_pdrv); +} + +module_init(emmaprp_init); +module_exit(emmaprp_exit); diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/video/noon010pc30.c index 50838bf84204..440c12962bae 100644 --- a/drivers/media/video/noon010pc30.c +++ b/drivers/media/video/noon010pc30.c @@ -725,8 +725,8 @@ static int noon010_probe(struct i2c_client *client, mutex_init(&info->lock); sd = &info->sd; - strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); v4l2_i2c_subdev_init(sd, client, &noon010_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); sd->internal_ops = &noon010_subdev_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; @@ -844,18 +844,7 @@ static struct i2c_driver noon010_i2c_driver = { .id_table = noon010_id, }; -static int __init noon010_init(void) -{ - return i2c_add_driver(&noon010_i2c_driver); -} - -static void __exit noon010_exit(void) -{ - i2c_del_driver(&noon010_i2c_driver); -} - -module_init(noon010_init); -module_exit(noon010_exit); +module_i2c_driver(noon010_i2c_driver); MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 1fb7d5bd5ec2..88cf9d952631 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -2268,13 +2268,12 @@ static struct platform_driver omap_vout_driver = { .driver = { .name = VOUT_NAME, }, - .probe = omap_vout_probe, .remove = omap_vout_remove, }; static int __init omap_vout_init(void) { - if (platform_driver_register(&omap_vout_driver) != 0) { + if (platform_driver_probe(&omap_vout_driver, omap_vout_probe) != 0) { printk(KERN_ERR VOUT_NAME ":Could not register Video driver\n"); return -EINVAL; } diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c index b5247cb64fde..3c2c5d3bcc6b 100644 --- a/drivers/media/video/ov2640.c +++ b/drivers/media/video/ov2640.c @@ -1103,21 +1103,7 @@ static struct i2c_driver ov2640_i2c_driver = { .id_table = ov2640_id, }; -/* - * Module functions - */ -static int __init ov2640_module_init(void) -{ - return i2c_add_driver(&ov2640_i2c_driver); -} - -static void __exit ov2640_module_exit(void) -{ - i2c_del_driver(&ov2640_i2c_driver); -} - -module_init(ov2640_module_init); -module_exit(ov2640_module_exit); +module_i2c_driver(ov2640_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor"); MODULE_AUTHOR("Alberto Panizzo"); diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c index bb37ec80f274..80e07794ac8e 100644 --- a/drivers/media/video/ov5642.c +++ b/drivers/media/video/ov5642.c @@ -1068,18 +1068,7 @@ static struct i2c_driver ov5642_i2c_driver = { .id_table = ov5642_id, }; -static int __init ov5642_mod_init(void) -{ - return i2c_add_driver(&ov5642_i2c_driver); -} - -static void __exit ov5642_mod_exit(void) -{ - i2c_del_driver(&ov5642_i2c_driver); -} - -module_init(ov5642_mod_init); -module_exit(ov5642_mod_exit); +module_i2c_driver(ov5642_i2c_driver); MODULE_DESCRIPTION("Omnivision OV5642 Camera driver"); MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index 3627f3225bbb..3e028b1970dd 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -1046,18 +1046,7 @@ static struct i2c_driver ov6650_i2c_driver = { .id_table = ov6650_id, }; -static int __init ov6650_module_init(void) -{ - return i2c_add_driver(&ov6650_i2c_driver); -} - -static void __exit ov6650_module_exit(void) -{ - i2c_del_driver(&ov6650_i2c_driver); -} - -module_init(ov6650_module_init); -module_exit(ov6650_module_exit); +module_i2c_driver(ov6650_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV6650"); MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>"); diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index 6a564964853a..e7c82b297514 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -1583,15 +1583,4 @@ static struct i2c_driver ov7670_driver = { .id_table = ov7670_id, }; -static __init int init_ov7670(void) -{ - return i2c_add_driver(&ov7670_driver); -} - -static __exit void exit_ov7670(void) -{ - i2c_del_driver(&ov7670_driver); -} - -module_init(init_ov7670); -module_exit(exit_ov7670); +module_i2c_driver(ov7670_driver); diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c index 9f6ce3d8a29e..74e77d327ed8 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/video/ov772x.c @@ -1123,22 +1123,7 @@ static struct i2c_driver ov772x_i2c_driver = { .id_table = ov772x_id, }; -/* - * module function - */ - -static int __init ov772x_module_init(void) -{ - return i2c_add_driver(&ov772x_i2c_driver); -} - -static void __exit ov772x_module_exit(void) -{ - i2c_del_driver(&ov772x_i2c_driver); -} - -module_init(ov772x_module_init); -module_exit(ov772x_module_exit); +module_i2c_driver(ov772x_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for ov772x"); MODULE_AUTHOR("Kuninori Morimoto"); diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c index a4f99797eb56..23412debb36b 100644 --- a/drivers/media/video/ov9640.c +++ b/drivers/media/video/ov9640.c @@ -738,18 +738,7 @@ static struct i2c_driver ov9640_i2c_driver = { .id_table = ov9640_id, }; -static int __init ov9640_module_init(void) -{ - return i2c_add_driver(&ov9640_i2c_driver); -} - -static void __exit ov9640_module_exit(void) -{ - i2c_del_driver(&ov9640_i2c_driver); -} - -module_init(ov9640_module_init); -module_exit(ov9640_module_exit); +module_i2c_driver(ov9640_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx"); MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c index d9a9f7174f7a..3eb07c22516e 100644 --- a/drivers/media/video/ov9740.c +++ b/drivers/media/video/ov9740.c @@ -998,18 +998,7 @@ static struct i2c_driver ov9740_i2c_driver = { .id_table = ov9740_id, }; -static int __init ov9740_module_init(void) -{ - return i2c_add_driver(&ov9740_i2c_driver); -} - -static void __exit ov9740_module_exit(void) -{ - i2c_del_driver(&ov9740_i2c_driver); -} - -module_init(ov9740_module_init); -module_exit(ov9740_module_exit); +module_i2c_driver(ov9740_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740"); MODULE_AUTHOR("Andrew Chew <achew@nvidia.com>"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index c6da8f77e1a2..d8c898278e8c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -320,7 +320,17 @@ static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; +static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + static struct tda18271_config hauppauge_tda18271_dvb_config = { + .std_map = &hauppauge_tda18271_dvbt_std_map, .gate = TDA18271_GATE_ANALOG, .output_opt = TDA18271_OUTPUT_LT_OFF, }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 6d666174dbb4..e1111d968a3d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -96,7 +96,6 @@ static struct v4l2_capability pvr_capability ={ .capabilities = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO | V4L2_CAP_READWRITE), - .reserved = {0,0,0,0} }; static struct v4l2_fmtdesc pvr_fmtdesc [] = { diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index f495eeb5403a..2834e3e65b39 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -1146,14 +1146,6 @@ leave: return ret; } -static int pwc_log_status(struct file *file, void *priv) -{ - struct pwc_device *pdev = video_drvdata(file); - - v4l2_ctrl_handler_log_status(&pdev->ctrl_handler, PWC_NAME); - return 0; -} - const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_querycap = pwc_querycap, .vidioc_enum_input = pwc_enum_input, @@ -1169,7 +1161,7 @@ const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_dqbuf = pwc_dqbuf, .vidioc_streamon = pwc_streamon, .vidioc_streamoff = pwc_streamoff, - .vidioc_log_status = pwc_log_status, + .vidioc_log_status = v4l2_ctrl_log_status, .vidioc_enum_framesizes = pwc_enum_framesizes, .vidioc_enum_frameintervals = pwc_enum_frameintervals, .vidioc_g_parm = pwc_g_parm, diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 0bd7da26d018..5a413f4427e0 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -921,12 +921,12 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev) /* "Safe default" - 13MHz */ recalculate_fifo_timeout(pcdev, 13000000); - clk_enable(pcdev->clk); + clk_prepare_enable(pcdev->clk); } static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev) { - clk_disable(pcdev->clk); + clk_disable_unprepare(pcdev->clk); } static irqreturn_t pxa_camera_irq(int irq, void *data) diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c index 9937386a3bae..f6419b22c258 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/video/rj54n1cb0c.c @@ -1407,18 +1407,7 @@ static struct i2c_driver rj54n1_i2c_driver = { .id_table = rj54n1_id, }; -static int __init rj54n1_mod_init(void) -{ - return i2c_add_driver(&rj54n1_i2c_driver); -} - -static void __exit rj54n1_mod_exit(void) -{ - i2c_del_driver(&rj54n1_i2c_driver); -} - -module_init(rj54n1_mod_init); -module_exit(rj54n1_mod_exit); +module_i2c_driver(rj54n1_i2c_driver); MODULE_DESCRIPTION("Sharp RJ54N1CB0C Camera driver"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index c1bef6187661..4894cbb1c547 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -134,7 +134,7 @@ /* usb config commands */ #define IN_DATA_TOKEN cpu_to_le32(0x2255c0de) -#define CMD_2255 cpu_to_le32(0xc2255000) +#define CMD_2255 0xc2255000 #define CMD_SET_MODE cpu_to_le32((CMD_2255 | 0x10)) #define CMD_START cpu_to_le32((CMD_2255 | 0x20)) #define CMD_STOP cpu_to_le32((CMD_2255 | 0x30)) @@ -852,15 +852,13 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - int index = 0; - if (f) - index = f->index; + int index = f->index; if (index >= ARRAY_SIZE(formats)) return -EINVAL; - if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) || - (formats[index].fourcc == V4L2_PIX_FMT_MJPEG))) - return -EINVAL; + if (!jpeg_enable && ((formats[index].fourcc == V4L2_PIX_FMT_JPEG) || + (formats[index].fourcc == V4L2_PIX_FMT_MJPEG))) + return -EINVAL; dprintk(4, "name %s\n", formats[index].name); strlcpy(f->description, formats[index].name, sizeof(f->description)); f->pixelformat = formats[index].fourcc; @@ -2027,7 +2025,7 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) pdata[1]); offset = jj + PREFIX_SIZE; bframe = 1; - cc = pdword[1]; + cc = le32_to_cpu(pdword[1]); if (cc >= MAX_CHANNELS) { printk(KERN_ERR "bad channel\n"); @@ -2036,22 +2034,22 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) /* reverse it */ dev->cc = G_chnmap[cc]; channel = &dev->channel[dev->cc]; - payload = pdword[3]; + payload = le32_to_cpu(pdword[3]); if (payload > channel->req_image_size) { channel->bad_payload++; /* discard the bad frame */ return -EINVAL; } channel->pkt_size = payload; - channel->jpg_size = pdword[4]; + channel->jpg_size = le32_to_cpu(pdword[4]); break; case S2255_MARKER_RESPONSE: pdata += DEF_USB_BLOCK; jj += DEF_USB_BLOCK; - if (pdword[1] >= MAX_CHANNELS) + if (le32_to_cpu(pdword[1]) >= MAX_CHANNELS) break; - cc = G_chnmap[pdword[1]]; + cc = G_chnmap[le32_to_cpu(pdword[1])]; if (cc >= MAX_CHANNELS) break; channel = &dev->channel[cc]; @@ -2074,11 +2072,11 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) wake_up(&dev->fw_data->wait_fw); break; case S2255_RESPONSE_STATUS: - channel->vidstatus = pdword[3]; + channel->vidstatus = le32_to_cpu(pdword[3]); channel->vidstatus_ready = 1; wake_up(&channel->wait_vidstatus); dprintk(5, "got vidstatus %x chan %d\n", - pdword[3], cc); + le32_to_cpu(pdword[3]), cc); break; default: printk(KERN_INFO "s2255 unknown resp\n"); @@ -2605,10 +2603,11 @@ static int s2255_probe(struct usb_interface *interface, __le32 *pRel; pRel = (__le32 *) &dev->fw_data->fw->data[fw_size - 4]; printk(KERN_INFO "s2255 dsp fw version %x\n", *pRel); - dev->dsp_fw_ver = *pRel; - if (*pRel < S2255_CUR_DSP_FWVER) + dev->dsp_fw_ver = le32_to_cpu(*pRel); + if (dev->dsp_fw_ver < S2255_CUR_DSP_FWVER) printk(KERN_INFO "s2255: f2255usb.bin out of date.\n"); - if (dev->pid == 0x2257 && *pRel < S2255_MIN_DSP_COLORFILTER) + if (dev->pid == 0x2257 && + dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER) printk(KERN_WARNING "s2255: 2257 requires firmware %d" " or above.\n", S2255_MIN_DSP_COLORFILTER); } diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c index 0df7f2a41814..6625e46a4638 100644 --- a/drivers/media/video/s5k6aa.c +++ b/drivers/media/video/s5k6aa.c @@ -1582,8 +1582,8 @@ static int s5k6aa_probe(struct i2c_client *client, s5k6aa->inv_vflip = pdata->vert_flip; sd = &s5k6aa->sd; - strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops); + strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); sd->internal_ops = &s5k6aa_subdev_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; @@ -1663,18 +1663,7 @@ static struct i2c_driver s5k6aa_i2c_driver = { .id_table = s5k6aa_id, }; -static int __init s5k6aa_init(void) -{ - return i2c_add_driver(&s5k6aa_i2c_driver); -} - -static void __exit s5k6aa_exit(void) -{ - i2c_del_driver(&s5k6aa_i2c_driver); -} - -module_init(s5k6aa_init); -module_exit(s5k6aa_exit); +module_i2c_driver(s5k6aa_i2c_driver); MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index a9e9653beeb4..b06efd208328 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -1019,52 +1019,117 @@ static int fimc_cap_dqbuf(struct file *file, void *priv, return vb2_dqbuf(&fimc->vid_cap.vbq, buf, file->f_flags & O_NONBLOCK); } -static int fimc_cap_cropcap(struct file *file, void *fh, - struct v4l2_cropcap *cr) +static int fimc_cap_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *create) { struct fimc_dev *fimc = video_drvdata(file); - struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame; - if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return -EINVAL; + return vb2_create_bufs(&fimc->vid_cap.vbq, create); +} - cr->bounds.left = 0; - cr->bounds.top = 0; - cr->bounds.width = f->o_width; - cr->bounds.height = f->o_height; - cr->defrect = cr->bounds; +static int fimc_cap_prepare_buf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct fimc_dev *fimc = video_drvdata(file); - return 0; + return vb2_prepare_buf(&fimc->vid_cap.vbq, b); } -static int fimc_cap_g_crop(struct file *file, void *fh, struct v4l2_crop *cr) +static int fimc_cap_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) { struct fimc_dev *fimc = video_drvdata(file); - struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame; + struct fimc_ctx *ctx = fimc->vid_cap.ctx; + struct fimc_frame *f = &ctx->s_frame; - cr->c.left = f->offs_h; - cr->c.top = f->offs_v; - cr->c.width = f->width; - cr->c.height = f->height; + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; - return 0; + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = f->o_width; + s->r.height = f->o_height; + return 0; + + case V4L2_SEL_TGT_COMPOSE_ACTIVE: + f = &ctx->d_frame; + case V4L2_SEL_TGT_CROP_ACTIVE: + s->r.left = f->offs_h; + s->r.top = f->offs_v; + s->r.width = f->width; + s->r.height = f->height; + return 0; + } + + return -EINVAL; } -static int fimc_cap_s_crop(struct file *file, void *fh, struct v4l2_crop *cr) +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ +int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b) +{ + if (a->left < b->left || a->top < b->top) + return 0; + if (a->left + a->width > b->left + b->width) + return 0; + if (a->top + a->height > b->top + b->height) + return 0; + + return 1; +} + +static int fimc_cap_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) { struct fimc_dev *fimc = video_drvdata(file); struct fimc_ctx *ctx = fimc->vid_cap.ctx; - struct fimc_frame *ff; + struct v4l2_rect rect = s->r; + struct fimc_frame *f; unsigned long flags; + unsigned int pad; - fimc_capture_try_crop(ctx, &cr->c, FIMC_SD_PAD_SINK); - ff = &ctx->s_frame; + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_ACTIVE: + f = &ctx->d_frame; + pad = FIMC_SD_PAD_SOURCE; + break; + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_ACTIVE: + f = &ctx->s_frame; + pad = FIMC_SD_PAD_SINK; + break; + default: + return -EINVAL; + } + + fimc_capture_try_crop(ctx, &rect, pad); + + if (s->flags & V4L2_SEL_FLAG_LE && + !enclosed_rectangle(&rect, &s->r)) + return -ERANGE; + + if (s->flags & V4L2_SEL_FLAG_GE && + !enclosed_rectangle(&s->r, &rect)) + return -ERANGE; + + s->r = rect; spin_lock_irqsave(&fimc->slock, flags); - set_frame_crop(ff, cr->c.left, cr->c.top, cr->c.width, cr->c.height); - set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + set_frame_crop(f, s->r.left, s->r.top, s->r.width, + s->r.height); spin_unlock_irqrestore(&fimc->slock, flags); + set_bit(ST_CAPT_APPLY_CFG, &fimc->state); return 0; } @@ -1082,12 +1147,14 @@ static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = { .vidioc_qbuf = fimc_cap_qbuf, .vidioc_dqbuf = fimc_cap_dqbuf, + .vidioc_prepare_buf = fimc_cap_prepare_buf, + .vidioc_create_bufs = fimc_cap_create_bufs, + .vidioc_streamon = fimc_cap_streamon, .vidioc_streamoff = fimc_cap_streamoff, - .vidioc_g_crop = fimc_cap_g_crop, - .vidioc_s_crop = fimc_cap_s_crop, - .vidioc_cropcap = fimc_cap_cropcap, + .vidioc_g_selection = fimc_cap_g_selection, + .vidioc_s_selection = fimc_cap_s_selection, .vidioc_enum_input = fimc_cap_enum_input, .vidioc_s_input = fimc_cap_s_input, diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 81bcbb9492ea..e184e650022a 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1602,24 +1602,35 @@ static void fimc_clk_put(struct fimc_dev *fimc) { int i; for (i = 0; i < fimc->num_clocks; i++) { - if (fimc->clock[i]) - clk_put(fimc->clock[i]); + if (IS_ERR_OR_NULL(fimc->clock[i])) + continue; + clk_unprepare(fimc->clock[i]); + clk_put(fimc->clock[i]); + fimc->clock[i] = NULL; } } static int fimc_clk_get(struct fimc_dev *fimc) { - int i; + int i, ret; + for (i = 0; i < fimc->num_clocks; i++) { fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clocks[i]); - if (!IS_ERR_OR_NULL(fimc->clock[i])) - continue; - dev_err(&fimc->pdev->dev, "failed to get fimc clock: %s\n", - fimc_clocks[i]); - return -ENXIO; + if (IS_ERR(fimc->clock[i])) + goto err; + ret = clk_prepare(fimc->clock[i]); + if (ret < 0) { + clk_put(fimc->clock[i]); + fimc->clock[i] = NULL; + goto err; + } } - return 0; +err: + fimc_clk_put(fimc); + dev_err(&fimc->pdev->dev, "failed to get clock: %s\n", + fimc_clocks[i]); + return -ENXIO; } static int fimc_m2m_suspend(struct fimc_dev *fimc) @@ -1667,8 +1678,6 @@ static int fimc_probe(struct platform_device *pdev) struct s5p_platform_fimc *pdata; int ret = 0; - dev_dbg(&pdev->dev, "%s():\n", __func__); - drv_data = (struct samsung_fimc_driverdata *) platform_get_device_id(pdev)->driver_data; @@ -1678,7 +1687,7 @@ static int fimc_probe(struct platform_device *pdev) return -EINVAL; } - fimc = kzalloc(sizeof(struct fimc_dev), GFP_KERNEL); + fimc = devm_kzalloc(&pdev->dev, sizeof(*fimc), GFP_KERNEL); if (!fimc) return -ENOMEM; @@ -1689,51 +1698,35 @@ static int fimc_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; fimc->pdata = pdata; - init_waitqueue_head(&fimc->irq_queue); spin_lock_init(&fimc->slock); mutex_init(&fimc->lock); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to find the registers\n"); - ret = -ENOENT; - goto err_info; - } - - fimc->regs_res = request_mem_region(res->start, resource_size(res), - dev_name(&pdev->dev)); - if (!fimc->regs_res) { - dev_err(&pdev->dev, "failed to obtain register region\n"); - ret = -ENOENT; - goto err_info; - } - - fimc->regs = ioremap(res->start, resource_size(res)); - if (!fimc->regs) { - dev_err(&pdev->dev, "failed to map registers\n"); - ret = -ENXIO; - goto err_req_region; + fimc->regs = devm_request_and_ioremap(&pdev->dev, res); + if (fimc->regs == NULL) { + dev_err(&pdev->dev, "Failed to obtain io memory\n"); + return -ENOENT; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get IRQ resource\n"); - ret = -ENXIO; - goto err_regs_unmap; + if (res == NULL) { + dev_err(&pdev->dev, "Failed to get IRQ resource\n"); + return -ENXIO; } fimc->irq = res->start; fimc->num_clocks = MAX_FIMC_CLOCKS; ret = fimc_clk_get(fimc); if (ret) - goto err_regs_unmap; + return ret; clk_set_rate(fimc->clock[CLK_BUS], drv_data->lclk_frequency); clk_enable(fimc->clock[CLK_BUS]); platform_set_drvdata(pdev, fimc); - ret = request_irq(fimc->irq, fimc_irq_handler, 0, pdev->name, fimc); + ret = devm_request_irq(&pdev->dev, fimc->irq, fimc_irq_handler, + 0, pdev->name, fimc); if (ret) { dev_err(&pdev->dev, "failed to install irq (%d)\n", ret); goto err_clk; @@ -1742,7 +1735,7 @@ static int fimc_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) - goto err_irq; + goto err_clk; /* Initialize contiguous memory allocator */ fimc->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); if (IS_ERR(fimc->alloc_ctx)) { @@ -1757,17 +1750,8 @@ static int fimc_probe(struct platform_device *pdev) err_pm: pm_runtime_put(&pdev->dev); -err_irq: - free_irq(fimc->irq, fimc); err_clk: fimc_clk_put(fimc); -err_regs_unmap: - iounmap(fimc->regs); -err_req_region: - release_resource(fimc->regs_res); - kfree(fimc->regs_res); -err_info: - kfree(fimc); return ret; } @@ -1854,11 +1838,6 @@ static int __devexit fimc_remove(struct platform_device *pdev) clk_disable(fimc->clock[CLK_BUS]); fimc_clk_put(fimc); - free_irq(fimc->irq, fimc); - iounmap(fimc->regs); - release_resource(fimc->regs_res); - kfree(fimc->regs_res); - kfree(fimc); dev_info(&pdev->dev, "driver unloaded\n"); return 0; diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index 4e20560c73d4..a18291e648e2 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -434,7 +434,6 @@ struct fimc_ctx; * @num_clocks: the number of clocks managed by this device instance * @clock: clocks required for FIMC operation * @regs: the mapped hardware registers - * @regs_res: the resource claimed for IO registers * @irq: FIMC interrupt number * @irq_queue: interrupt handler waitqueue * @v4l2_dev: root v4l2_device @@ -454,7 +453,6 @@ struct fimc_dev { u16 num_clocks; struct clk *clock[MAX_FIMC_CLOCKS]; void __iomem *regs; - struct resource *regs_res; int irq; wait_queue_head_t irq_queue; struct v4l2_device *v4l2_dev; diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index 63eccb55728f..62ed37e40149 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -750,7 +750,7 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) struct fimc_md *fmd; int ret; - fmd = kzalloc(sizeof(struct fimc_md), GFP_KERNEL); + fmd = devm_kzalloc(&pdev->dev, sizeof(*fmd), GFP_KERNEL); if (!fmd) return -ENOMEM; @@ -771,7 +771,7 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) ret = v4l2_device_register(&pdev->dev, &fmd->v4l2_dev); if (ret < 0) { v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret); - goto err1; + return ret; } ret = media_device_register(&fmd->media_dev); if (ret < 0) { @@ -813,8 +813,6 @@ err3: fimc_md_unregister_entities(fmd); err2: v4l2_device_unregister(&fmd->v4l2_dev); -err1: - kfree(fmd); return ret; } @@ -828,7 +826,6 @@ static int __devexit fimc_md_remove(struct platform_device *pdev) fimc_md_unregister_entities(fmd); media_device_unregister(&fmd->media_dev); fimc_md_put_clocks(fmd); - kfree(fmd); return 0; } diff --git a/drivers/media/video/s5p-fimc/mipi-csis.c b/drivers/media/video/s5p-fimc/mipi-csis.c index 130335cf62fd..f44f690397f7 100644 --- a/drivers/media/video/s5p-fimc/mipi-csis.c +++ b/drivers/media/video/s5p-fimc/mipi-csis.c @@ -1,8 +1,8 @@ /* * Samsung S5P/EXYNOS4 SoC series MIPI-CSI receiver driver * - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> + * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki, <s.nawrocki@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -100,7 +100,6 @@ enum { * @pads: CSIS pads array * @sd: v4l2_subdev associated with CSIS device instance * @pdev: CSIS platform device - * @regs_res: requested I/O register memory resource * @regs: mmaped I/O registers memory * @clock: CSIS clocks * @irq: requested s5p-mipi-csis irq number @@ -113,7 +112,6 @@ struct csis_state { struct media_pad pads[CSIS_PADS_NUM]; struct v4l2_subdev sd; struct platform_device *pdev; - struct resource *regs_res; void __iomem *regs; struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES]; struct clk *clock[NUM_CSIS_CLOCKS]; @@ -258,26 +256,36 @@ static void s5pcsis_clk_put(struct csis_state *state) { int i; - for (i = 0; i < NUM_CSIS_CLOCKS; i++) - if (!IS_ERR_OR_NULL(state->clock[i])) - clk_put(state->clock[i]); + for (i = 0; i < NUM_CSIS_CLOCKS; i++) { + if (IS_ERR_OR_NULL(state->clock[i])) + continue; + clk_unprepare(state->clock[i]); + clk_put(state->clock[i]); + state->clock[i] = NULL; + } } static int s5pcsis_clk_get(struct csis_state *state) { struct device *dev = &state->pdev->dev; - int i; + int i, ret; for (i = 0; i < NUM_CSIS_CLOCKS; i++) { state->clock[i] = clk_get(dev, csi_clock_name[i]); - if (IS_ERR(state->clock[i])) { - s5pcsis_clk_put(state); - dev_err(dev, "failed to get clock: %s\n", - csi_clock_name[i]); - return -ENXIO; + if (IS_ERR(state->clock[i])) + goto err; + ret = clk_prepare(state->clock[i]); + if (ret < 0) { + clk_put(state->clock[i]); + state->clock[i] = NULL; + goto err; } } return 0; +err: + s5pcsis_clk_put(state); + dev_err(dev, "failed to get clock: %s\n", csi_clock_name[i]); + return -ENXIO; } static int s5pcsis_s_power(struct v4l2_subdev *sd, int on) @@ -480,12 +488,11 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) { struct s5p_platform_mipi_csis *pdata; struct resource *mem_res; - struct resource *regs_res; struct csis_state *state; int ret = -ENOMEM; int i; - state = kzalloc(sizeof(*state), GFP_KERNEL); + state = devm_kzalloc(&pdev->dev, sizeof(*state), GFP_KERNEL); if (!state) return -ENOMEM; @@ -495,52 +502,27 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (pdata == NULL || pdata->phy_enable == NULL) { dev_err(&pdev->dev, "Platform data not fully specified\n"); - goto e_free; + return -EINVAL; } if ((pdev->id == 1 && pdata->lanes > CSIS1_MAX_LANES) || pdata->lanes > CSIS0_MAX_LANES) { - ret = -EINVAL; dev_err(&pdev->dev, "Unsupported number of data lanes: %d\n", pdata->lanes); - goto e_free; + return -EINVAL; } mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "Failed to get IO memory region\n"); - goto e_free; + state->regs = devm_request_and_ioremap(&pdev->dev, mem_res); + if (state->regs == NULL) { + dev_err(&pdev->dev, "Failed to request and remap io memory\n"); + return -ENXIO; } - regs_res = request_mem_region(mem_res->start, resource_size(mem_res), - pdev->name); - if (!regs_res) { - dev_err(&pdev->dev, "Failed to request IO memory region\n"); - goto e_free; - } - state->regs_res = regs_res; - - state->regs = ioremap(mem_res->start, resource_size(mem_res)); - if (!state->regs) { - dev_err(&pdev->dev, "Failed to remap IO region\n"); - goto e_reqmem; - } - - ret = s5pcsis_clk_get(state); - if (ret) - goto e_unmap; - - clk_enable(state->clock[CSIS_CLK_MUX]); - if (pdata->clk_rate) - clk_set_rate(state->clock[CSIS_CLK_MUX], pdata->clk_rate); - else - dev_WARN(&pdev->dev, "No clock frequency specified!\n"); - state->irq = platform_get_irq(pdev, 0); if (state->irq < 0) { - ret = state->irq; dev_err(&pdev->dev, "Failed to get irq\n"); - goto e_clkput; + return state->irq; } for (i = 0; i < CSIS_NUM_SUPPLIES; i++) @@ -549,12 +531,22 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) ret = regulator_bulk_get(&pdev->dev, CSIS_NUM_SUPPLIES, state->supplies); if (ret) + return ret; + + ret = s5pcsis_clk_get(state); + if (ret) goto e_clkput; - ret = request_irq(state->irq, s5pcsis_irq_handler, 0, - dev_name(&pdev->dev), state); + clk_enable(state->clock[CSIS_CLK_MUX]); + if (pdata->clk_rate) + clk_set_rate(state->clock[CSIS_CLK_MUX], pdata->clk_rate); + else + dev_WARN(&pdev->dev, "No clock frequency specified!\n"); + + ret = devm_request_irq(&pdev->dev, state->irq, s5pcsis_irq_handler, + 0, dev_name(&pdev->dev), state); if (ret) { - dev_err(&pdev->dev, "request_irq failed\n"); + dev_err(&pdev->dev, "Interrupt request failed\n"); goto e_regput; } @@ -573,7 +565,7 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) ret = media_entity_init(&state->sd.entity, CSIS_PADS_NUM, state->pads, 0); if (ret < 0) - goto e_irqfree; + goto e_clkput; /* This allows to retrieve the platform device id by the host driver */ v4l2_set_subdevdata(&state->sd, pdev); @@ -582,22 +574,13 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &state->sd); pm_runtime_enable(&pdev->dev); - return 0; -e_irqfree: - free_irq(state->irq, state); e_regput: regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supplies); e_clkput: clk_disable(state->clock[CSIS_CLK_MUX]); s5pcsis_clk_put(state); -e_unmap: - iounmap(state->regs); -e_reqmem: - release_mem_region(regs_res->start, resource_size(regs_res)); -e_free: - kfree(state); return ret; } @@ -699,21 +682,15 @@ static int __devexit s5pcsis_remove(struct platform_device *pdev) { struct v4l2_subdev *sd = platform_get_drvdata(pdev); struct csis_state *state = sd_to_csis_state(sd); - struct resource *res = state->regs_res; pm_runtime_disable(&pdev->dev); - s5pcsis_suspend(&pdev->dev); + s5pcsis_pm_suspend(&pdev->dev, false); clk_disable(state->clock[CSIS_CLK_MUX]); pm_runtime_set_suspended(&pdev->dev); - s5pcsis_clk_put(state); regulator_bulk_free(CSIS_NUM_SUPPLIES, state->supplies); media_entity_cleanup(&state->sd.entity); - free_irq(state->irq, state); - iounmap(state->regs); - release_mem_region(res->start, resource_size(res)); - kfree(state); return 0; } diff --git a/drivers/media/video/s5p-g2d/g2d-hw.c b/drivers/media/video/s5p-g2d/g2d-hw.c index 39937cf03c88..5b86cbe408e2 100644 --- a/drivers/media/video/s5p-g2d/g2d-hw.c +++ b/drivers/media/video/s5p-g2d/g2d-hw.c @@ -77,6 +77,11 @@ void g2d_set_rop4(struct g2d_dev *d, u32 r) w(r, ROP4_REG); } +void g2d_set_flip(struct g2d_dev *d, u32 r) +{ + w(r, SRC_MSK_DIRECT_REG); +} + u32 g2d_cmd_stretch(u32 e) { e &= 1; diff --git a/drivers/media/video/s5p-g2d/g2d.c b/drivers/media/video/s5p-g2d/g2d.c index febaa673d363..789de74014e5 100644 --- a/drivers/media/video/s5p-g2d/g2d.c +++ b/drivers/media/video/s5p-g2d/g2d.c @@ -178,6 +178,9 @@ static int g2d_s_ctrl(struct v4l2_ctrl *ctrl) { struct g2d_ctx *ctx = container_of(ctrl->handler, struct g2d_ctx, ctrl_handler); + unsigned long flags; + + spin_lock_irqsave(&ctx->dev->ctrl_lock, flags); switch (ctrl->id) { case V4L2_CID_COLORFX: if (ctrl->val == V4L2_COLORFX_NEGATIVE) @@ -185,10 +188,13 @@ static int g2d_s_ctrl(struct v4l2_ctrl *ctrl) else ctx->rop = ROP4_COPY; break; - default: - v4l2_err(&ctx->dev->v4l2_dev, "unknown control\n"); - return -EINVAL; + + case V4L2_CID_HFLIP: + ctx->flip = ctx->ctrl_hflip->val | (ctx->ctrl_vflip->val << 1); + break; + } + spin_unlock_irqrestore(&ctx->dev->ctrl_lock, flags); return 0; } @@ -200,11 +206,13 @@ int g2d_setup_ctrls(struct g2d_ctx *ctx) { struct g2d_dev *dev = ctx->dev; - v4l2_ctrl_handler_init(&ctx->ctrl_handler, 1); - if (ctx->ctrl_handler.error) { - v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n"); - return ctx->ctrl_handler.error; - } + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3); + + ctx->ctrl_hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, &g2d_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + + ctx->ctrl_vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, &g2d_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); v4l2_ctrl_new_std_menu( &ctx->ctrl_handler, @@ -215,10 +223,14 @@ int g2d_setup_ctrls(struct g2d_ctx *ctx) V4L2_COLORFX_NONE); if (ctx->ctrl_handler.error) { - v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n"); - return ctx->ctrl_handler.error; + int err = ctx->ctrl_handler.error; + v4l2_err(&dev->v4l2_dev, "g2d_setup_ctrls failed\n"); + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + return err; } + v4l2_ctrl_cluster(2, &ctx->ctrl_hflip); + return 0; } @@ -547,6 +559,7 @@ static void device_run(void *prv) struct g2d_ctx *ctx = prv; struct g2d_dev *dev = ctx->dev; struct vb2_buffer *src, *dst; + unsigned long flags; u32 cmd = 0; dev->curr = ctx; @@ -557,6 +570,8 @@ static void device_run(void *prv) clk_enable(dev->gate); g2d_reset(dev); + spin_lock_irqsave(&dev->ctrl_lock, flags); + g2d_set_src_size(dev, &ctx->in); g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(src, 0)); @@ -564,11 +579,15 @@ static void device_run(void *prv) g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0)); g2d_set_rop4(dev, ctx->rop); + g2d_set_flip(dev, ctx->flip); + if (ctx->in.c_width != ctx->out.c_width || ctx->in.c_height != ctx->out.c_height) cmd |= g2d_cmd_stretch(1); g2d_set_cmd(dev, cmd); g2d_start(dev); + + spin_unlock_irqrestore(&dev->ctrl_lock, flags); } static irqreturn_t g2d_isr(int irq, void *prv) @@ -658,7 +677,7 @@ static int g2d_probe(struct platform_device *pdev) dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - spin_lock_init(&dev->irqlock); + spin_lock_init(&dev->ctrl_lock); mutex_init(&dev->mutex); atomic_set(&dev->num_inst, 0); init_waitqueue_head(&dev->irq_queue); @@ -693,18 +712,30 @@ static int g2d_probe(struct platform_device *pdev) goto unmap_regs; } + ret = clk_prepare(dev->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare g2d clock\n"); + goto put_clk; + } + dev->gate = clk_get(&pdev->dev, "fimg2d"); if (IS_ERR_OR_NULL(dev->gate)) { dev_err(&pdev->dev, "failed to get g2d clock gate\n"); ret = -ENXIO; - goto put_clk; + goto unprep_clk; + } + + ret = clk_prepare(dev->gate); + if (ret) { + dev_err(&pdev->dev, "failed to prepare g2d clock gate\n"); + goto put_clk_gate; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { dev_err(&pdev->dev, "failed to find IRQ\n"); ret = -ENXIO; - goto put_clk_gate; + goto unprep_clk_gate; } dev->irq = res->start; @@ -764,8 +795,12 @@ alloc_ctx_cleanup: vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); rel_irq: free_irq(dev->irq, dev); +unprep_clk_gate: + clk_unprepare(dev->gate); put_clk_gate: clk_put(dev->gate); +unprep_clk: + clk_unprepare(dev->clk); put_clk: clk_put(dev->clk); unmap_regs: @@ -787,7 +822,9 @@ static int g2d_remove(struct platform_device *pdev) v4l2_device_unregister(&dev->v4l2_dev); vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); free_irq(dev->irq, dev); + clk_unprepare(dev->gate); clk_put(dev->gate); + clk_unprepare(dev->clk); clk_put(dev->clk); iounmap(dev->regs); release_resource(dev->res_regs); diff --git a/drivers/media/video/s5p-g2d/g2d.h b/drivers/media/video/s5p-g2d/g2d.h index 5eae90107bf8..1b82065aeaef 100644 --- a/drivers/media/video/s5p-g2d/g2d.h +++ b/drivers/media/video/s5p-g2d/g2d.h @@ -20,7 +20,7 @@ struct g2d_dev { struct v4l2_m2m_dev *m2m_dev; struct video_device *vfd; struct mutex mutex; - spinlock_t irqlock; + spinlock_t ctrl_lock; atomic_t num_inst; struct vb2_alloc_ctx *alloc_ctx; struct resource *res_regs; @@ -57,8 +57,11 @@ struct g2d_ctx { struct v4l2_m2m_ctx *m2m_ctx; struct g2d_frame in; struct g2d_frame out; + struct v4l2_ctrl *ctrl_hflip; + struct v4l2_ctrl *ctrl_vflip; struct v4l2_ctrl_handler ctrl_handler; u32 rop; + u32 flip; }; struct g2d_fmt { @@ -77,6 +80,7 @@ void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a); void g2d_start(struct g2d_dev *d); void g2d_clear_int(struct g2d_dev *d); void g2d_set_rop4(struct g2d_dev *d, u32 r); +void g2d_set_flip(struct g2d_dev *d, u32 r); u32 g2d_cmd_stretch(u32 e); void g2d_set_cmd(struct g2d_dev *d, u32 c); diff --git a/drivers/media/video/s5p-jpeg/jpeg-core.c b/drivers/media/video/s5p-jpeg/jpeg-core.c index 1105a8749c8b..5a49c307f9c1 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-core.c +++ b/drivers/media/video/s5p-jpeg/jpeg-core.c @@ -32,10 +32,9 @@ static struct s5p_jpeg_fmt formats_enc[] = { { - .name = "YUV 4:2:0 planar, YCbCr", - .fourcc = V4L2_PIX_FMT_YUV420, - .depth = 12, - .colplanes = 3, + .name = "JPEG JFIF", + .fourcc = V4L2_PIX_FMT_JPEG, + .colplanes = 1, .types = MEM2MEM_CAPTURE, }, { @@ -43,7 +42,7 @@ static struct s5p_jpeg_fmt formats_enc[] = { .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .colplanes = 1, - .types = MEM2MEM_CAPTURE | MEM2MEM_OUTPUT, + .types = MEM2MEM_OUTPUT, }, { .name = "RGB565", @@ -203,6 +202,16 @@ static const unsigned char hactblg0[162] = { 0xf9, 0xfa }; +static inline struct s5p_jpeg_ctx *ctrl_to_ctx(struct v4l2_ctrl *c) +{ + return container_of(c->handler, struct s5p_jpeg_ctx, ctrl_handler); +} + +static inline struct s5p_jpeg_ctx *fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct s5p_jpeg_ctx, fh); +} + static inline void jpeg_set_qtbl(void __iomem *regs, const unsigned char *qtbl, unsigned long tab, int len) { @@ -269,6 +278,7 @@ static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq); static struct s5p_jpeg_fmt *s5p_jpeg_find_format(unsigned int mode, __u32 pixelformat); +static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx); static int s5p_jpeg_open(struct file *file) { @@ -276,12 +286,18 @@ static int s5p_jpeg_open(struct file *file) struct video_device *vfd = video_devdata(file); struct s5p_jpeg_ctx *ctx; struct s5p_jpeg_fmt *out_fmt; + int ret = 0; ctx = kzalloc(sizeof *ctx, GFP_KERNEL); if (!ctx) return -ENOMEM; - file->private_data = ctx; + v4l2_fh_init(&ctx->fh, vfd); + /* Use separate control handler per file handle */ + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + ctx->jpeg = jpeg; if (vfd == jpeg->vfd_encoder) { ctx->mode = S5P_JPEG_ENCODE; @@ -291,24 +307,35 @@ static int s5p_jpeg_open(struct file *file) out_fmt = s5p_jpeg_find_format(ctx->mode, V4L2_PIX_FMT_JPEG); } + ret = s5p_jpeg_controls_create(ctx); + if (ret < 0) + goto error; + ctx->m2m_ctx = v4l2_m2m_ctx_init(jpeg->m2m_dev, ctx, queue_init); if (IS_ERR(ctx->m2m_ctx)) { - int err = PTR_ERR(ctx->m2m_ctx); - kfree(ctx); - return err; + ret = PTR_ERR(ctx->m2m_ctx); + goto error; } ctx->out_q.fmt = out_fmt; ctx->cap_q.fmt = s5p_jpeg_find_format(ctx->mode, V4L2_PIX_FMT_YUYV); - return 0; + +error: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + return ret; } static int s5p_jpeg_release(struct file *file) { - struct s5p_jpeg_ctx *ctx = file->private_data; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); v4l2_m2m_ctx_release(ctx->m2m_ctx); + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); kfree(ctx); return 0; @@ -317,14 +344,14 @@ static int s5p_jpeg_release(struct file *file) static unsigned int s5p_jpeg_poll(struct file *file, struct poll_table_struct *wait) { - struct s5p_jpeg_ctx *ctx = file->private_data; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); } static int s5p_jpeg_mmap(struct file *file, struct vm_area_struct *vma) { - struct s5p_jpeg_ctx *ctx = file->private_data; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(file->private_data); return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); } @@ -448,7 +475,7 @@ static bool s5p_jpeg_parse_hdr(struct s5p_jpeg_q_data *result, static int s5p_jpeg_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (ctx->mode == S5P_JPEG_ENCODE) { strlcpy(cap->driver, S5P_JPEG_M2M_NAME " encoder", @@ -497,9 +524,7 @@ static int enum_fmt(struct s5p_jpeg_fmt *formats, int n, static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - struct s5p_jpeg_ctx *ctx; - - ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (ctx->mode == S5P_JPEG_ENCODE) return enum_fmt(formats_enc, NUM_FORMATS_ENC, f, @@ -511,9 +536,7 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv, static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - struct s5p_jpeg_ctx *ctx; - - ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (ctx->mode == S5P_JPEG_ENCODE) return enum_fmt(formats_enc, NUM_FORMATS_ENC, f, @@ -538,7 +561,7 @@ static int s5p_jpeg_g_fmt(struct file *file, void *priv, struct v4l2_format *f) struct vb2_queue *vq; struct s5p_jpeg_q_data *q_data = NULL; struct v4l2_pix_format *pix = &f->fmt.pix; - struct s5p_jpeg_ctx *ct = priv; + struct s5p_jpeg_ctx *ct = fh_to_ctx(priv); vq = v4l2_m2m_get_vq(ct->m2m_ctx, f->type); if (!vq) @@ -659,8 +682,8 @@ static int vidioc_try_fmt(struct v4l2_format *f, struct s5p_jpeg_fmt *fmt, static int s5p_jpeg_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); struct s5p_jpeg_fmt *fmt; - struct s5p_jpeg_ctx *ctx = priv; fmt = s5p_jpeg_find_format(ctx->mode, f->fmt.pix.pixelformat); if (!fmt || !(fmt->types & MEM2MEM_CAPTURE)) { @@ -676,8 +699,8 @@ static int s5p_jpeg_try_fmt_vid_cap(struct file *file, void *priv, static int s5p_jpeg_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_format *f) { + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); struct s5p_jpeg_fmt *fmt; - struct s5p_jpeg_ctx *ctx = priv; fmt = s5p_jpeg_find_format(ctx->mode, f->fmt.pix.pixelformat); if (!fmt || !(fmt->types & MEM2MEM_OUTPUT)) { @@ -728,7 +751,7 @@ static int s5p_jpeg_s_fmt_vid_cap(struct file *file, void *priv, if (ret) return ret; - return s5p_jpeg_s_fmt(priv, f); + return s5p_jpeg_s_fmt(fh_to_ctx(priv), f); } static int s5p_jpeg_s_fmt_vid_out(struct file *file, void *priv, @@ -740,13 +763,13 @@ static int s5p_jpeg_s_fmt_vid_out(struct file *file, void *priv, if (ret) return ret; - return s5p_jpeg_s_fmt(priv, f); + return s5p_jpeg_s_fmt(fh_to_ctx(priv), f); } static int s5p_jpeg_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *reqbufs) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); } @@ -754,14 +777,14 @@ static int s5p_jpeg_reqbufs(struct file *file, void *priv, static int s5p_jpeg_querybuf(struct file *file, void *priv, struct v4l2_buffer *buf) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); } static int s5p_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); } @@ -769,7 +792,7 @@ static int s5p_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) static int s5p_jpeg_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); } @@ -777,7 +800,7 @@ static int s5p_jpeg_dqbuf(struct file *file, void *priv, static int s5p_jpeg_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); } @@ -785,7 +808,7 @@ static int s5p_jpeg_streamon(struct file *file, void *priv, static int s5p_jpeg_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); } @@ -793,7 +816,7 @@ static int s5p_jpeg_streamoff(struct file *file, void *priv, int s5p_jpeg_g_selection(struct file *file, void *priv, struct v4l2_selection *s) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv); if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) @@ -822,33 +845,89 @@ int s5p_jpeg_g_selection(struct file *file, void *priv, return 0; } -static int s5p_jpeg_g_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *compr) +/* + * V4L2 controls + */ + +static int s5p_jpeg_g_volatile_ctrl(struct v4l2_ctrl *ctrl) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = ctrl_to_ctx(ctrl); + struct s5p_jpeg *jpeg = ctx->jpeg; + unsigned long flags; - if (ctx->mode == S5P_JPEG_DECODE) - return -ENOTTY; + switch (ctrl->id) { + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: + spin_lock_irqsave(&jpeg->slock, flags); - memset(compr, 0, sizeof(*compr)); - compr->quality = ctx->compr_quality; + WARN_ON(ctx->subsampling > S5P_SUBSAMPLING_MODE_GRAY); + if (ctx->subsampling > 2) + ctrl->val = V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY; + else + ctrl->val = ctx->subsampling; + spin_unlock_irqrestore(&jpeg->slock, flags); + break; + } return 0; } -static int s5p_jpeg_s_jpegcomp(struct file *file, void *priv, - struct v4l2_jpegcompression *compr) +static int s5p_jpeg_s_ctrl(struct v4l2_ctrl *ctrl) { - struct s5p_jpeg_ctx *ctx = priv; + struct s5p_jpeg_ctx *ctx = ctrl_to_ctx(ctrl); + unsigned long flags; - if (ctx->mode == S5P_JPEG_DECODE) - return -ENOTTY; + spin_lock_irqsave(&ctx->jpeg->slock, flags); - compr->quality = clamp(compr->quality, S5P_JPEG_COMPR_QUAL_BEST, - S5P_JPEG_COMPR_QUAL_WORST); + switch (ctrl->id) { + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + ctx->compr_quality = S5P_JPEG_COMPR_QUAL_WORST - ctrl->val; + break; + case V4L2_CID_JPEG_RESTART_INTERVAL: + ctx->restart_interval = ctrl->val; + break; + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: + ctx->subsampling = ctrl->val; + break; + } - ctx->compr_quality = S5P_JPEG_COMPR_QUAL_WORST - compr->quality; + spin_unlock_irqrestore(&ctx->jpeg->slock, flags); + return 0; +} + +static const struct v4l2_ctrl_ops s5p_jpeg_ctrl_ops = { + .g_volatile_ctrl = s5p_jpeg_g_volatile_ctrl, + .s_ctrl = s5p_jpeg_s_ctrl, +}; +static int s5p_jpeg_controls_create(struct s5p_jpeg_ctx *ctx) +{ + unsigned int mask = ~0x27; /* 444, 422, 420, GRAY */ + struct v4l2_ctrl *ctrl; + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3); + + if (ctx->mode == S5P_JPEG_ENCODE) { + v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, + 0, 3, 1, 3); + + v4l2_ctrl_new_std(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, + V4L2_CID_JPEG_RESTART_INTERVAL, + 0, 3, 0xffff, 0); + mask = ~0x06; /* 422, 420 */ + } + + ctrl = v4l2_ctrl_new_std_menu(&ctx->ctrl_handler, &s5p_jpeg_ctrl_ops, + V4L2_CID_JPEG_CHROMA_SUBSAMPLING, + V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY, mask, + V4L2_JPEG_CHROMA_SUBSAMPLING_422); + + if (ctx->ctrl_handler.error) + return ctx->ctrl_handler.error; + + if (ctx->mode == S5P_JPEG_DECODE) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE | + V4L2_CTRL_FLAG_READ_ONLY; return 0; } @@ -877,9 +956,6 @@ static const struct v4l2_ioctl_ops s5p_jpeg_ioctl_ops = { .vidioc_streamoff = s5p_jpeg_streamoff, .vidioc_g_selection = s5p_jpeg_g_selection, - - .vidioc_g_jpegcomp = s5p_jpeg_g_jpegcomp, - .vidioc_s_jpegcomp = s5p_jpeg_s_jpegcomp, }; /* @@ -908,13 +984,8 @@ static void s5p_jpeg_device_run(void *priv) jpeg_input_raw_mode(jpeg->regs, S5P_JPEG_RAW_IN_565); else jpeg_input_raw_mode(jpeg->regs, S5P_JPEG_RAW_IN_422); - if (ctx->cap_q.fmt->fourcc == V4L2_PIX_FMT_YUYV) - jpeg_subsampling_mode(jpeg->regs, - S5P_JPEG_SUBSAMPLING_422); - else - jpeg_subsampling_mode(jpeg->regs, - S5P_JPEG_SUBSAMPLING_420); - jpeg_dri(jpeg->regs, 0); + jpeg_subsampling_mode(jpeg->regs, ctx->subsampling); + jpeg_dri(jpeg->regs, ctx->restart_interval); jpeg_x(jpeg->regs, ctx->out_q.w); jpeg_y(jpeg->regs, ctx->out_q.h); jpeg_imgadr(jpeg->regs, src_addr); @@ -953,14 +1024,18 @@ static void s5p_jpeg_device_run(void *priv) jpeg_htbl_dc(jpeg->regs, 2); jpeg_htbl_ac(jpeg->regs, 3); jpeg_htbl_dc(jpeg->regs, 3); - } else { + } else { /* S5P_JPEG_DECODE */ jpeg_rst_int_enable(jpeg->regs, true); jpeg_data_num_int_enable(jpeg->regs, true); jpeg_final_mcu_num_int_enable(jpeg->regs, true); - jpeg_outform_raw(jpeg->regs, S5P_JPEG_RAW_OUT_422); + if (ctx->cap_q.fmt->fourcc == V4L2_PIX_FMT_YUYV) + jpeg_outform_raw(jpeg->regs, S5P_JPEG_RAW_OUT_422); + else + jpeg_outform_raw(jpeg->regs, S5P_JPEG_RAW_OUT_420); jpeg_jpgadr(jpeg->regs, src_addr); jpeg_imgadr(jpeg->regs, dst_addr); } + jpeg_start(jpeg->regs); } @@ -1162,6 +1237,8 @@ static irqreturn_t s5p_jpeg_irq(int irq, void *dev_id) bool timer_elapsed = false; bool op_completed = false; + spin_lock(&jpeg->slock); + curr_ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev); src_buf = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); @@ -1192,6 +1269,9 @@ static irqreturn_t s5p_jpeg_irq(int irq, void *dev_id) v4l2_m2m_buf_done(dst_buf, state); v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->m2m_ctx); + curr_ctx->subsampling = jpeg_get_subsampling_mode(jpeg->regs); + spin_unlock(&jpeg->slock); + jpeg_clear_int(jpeg->regs); return IRQ_HANDLED; @@ -1215,6 +1295,7 @@ static int s5p_jpeg_probe(struct platform_device *pdev) return -ENOMEM; mutex_init(&jpeg->lock); + spin_lock_init(&jpeg->slock); jpeg->dev = &pdev->dev; /* memory-mapped registers */ diff --git a/drivers/media/video/s5p-jpeg/jpeg-core.h b/drivers/media/video/s5p-jpeg/jpeg-core.h index facad6114f5e..38d7367f7a6d 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-core.h +++ b/drivers/media/video/s5p-jpeg/jpeg-core.h @@ -14,6 +14,8 @@ #define JPEG_CORE_H_ #include <media/v4l2-device.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> #define S5P_JPEG_M2M_NAME "s5p-jpeg" @@ -47,6 +49,7 @@ /** * struct s5p_jpeg - JPEG IP abstraction * @lock: the mutex protecting this structure + * @slock: spinlock protecting the device contexts * @v4l2_dev: v4l2 device for mem2mem mode * @vfd_encoder: video device node for encoder mem2mem mode * @vfd_decoder: video device node for decoder mem2mem mode @@ -60,6 +63,7 @@ */ struct s5p_jpeg { struct mutex lock; + struct spinlock slock; struct v4l2_device v4l2_dev; struct video_device *vfd_encoder; @@ -117,15 +121,20 @@ struct s5p_jpeg_q_data { * @out_q: source (output) queue information * @cap_fmt: destination (capture) queue queue information * @hdr_parsed: set if header has been parsed during decompression + * @ctrl_handler: controls handler */ struct s5p_jpeg_ctx { struct s5p_jpeg *jpeg; unsigned int mode; - unsigned int compr_quality; + unsigned short compr_quality; + unsigned short restart_interval; + unsigned short subsampling; struct v4l2_m2m_ctx *m2m_ctx; struct s5p_jpeg_q_data out_q; struct s5p_jpeg_q_data cap_q; + struct v4l2_fh fh; bool hdr_parsed; + struct v4l2_ctrl_handler ctrl_handler; }; /** diff --git a/drivers/media/video/s5p-jpeg/jpeg-hw.h b/drivers/media/video/s5p-jpeg/jpeg-hw.h index e10c744e9f23..f12f0fdbde7c 100644 --- a/drivers/media/video/s5p-jpeg/jpeg-hw.h +++ b/drivers/media/video/s5p-jpeg/jpeg-hw.h @@ -13,6 +13,7 @@ #define JPEG_HW_H_ #include <linux/io.h> +#include <linux/videodev2.h> #include "jpeg-hw.h" #include "jpeg-regs.h" @@ -25,8 +26,6 @@ #define S5P_JPEG_DECODE 1 #define S5P_JPEG_RAW_IN_565 0 #define S5P_JPEG_RAW_IN_422 1 -#define S5P_JPEG_SUBSAMPLING_422 0 -#define S5P_JPEG_SUBSAMPLING_420 1 #define S5P_JPEG_RAW_OUT_422 0 #define S5P_JPEG_RAW_OUT_420 1 @@ -91,21 +90,26 @@ static inline void jpeg_proc_mode(void __iomem *regs, unsigned long mode) writel(reg, regs + S5P_JPGMOD); } -static inline void jpeg_subsampling_mode(void __iomem *regs, unsigned long mode) +static inline void jpeg_subsampling_mode(void __iomem *regs, unsigned int mode) { unsigned long reg, m; - m = S5P_SUBSAMPLING_MODE_422; - if (mode == S5P_JPEG_SUBSAMPLING_422) - m = S5P_SUBSAMPLING_MODE_422; - else if (mode == S5P_JPEG_SUBSAMPLING_420) + if (mode == V4L2_JPEG_CHROMA_SUBSAMPLING_420) m = S5P_SUBSAMPLING_MODE_420; + else + m = S5P_SUBSAMPLING_MODE_422; + reg = readl(regs + S5P_JPGMOD); reg &= ~S5P_SUBSAMPLING_MODE_MASK; reg |= m; writel(reg, regs + S5P_JPGMOD); } +static inline unsigned int jpeg_get_subsampling_mode(void __iomem *regs) +{ + return readl(regs + S5P_JPGMOD) & S5P_SUBSAMPLING_MODE_MASK; +} + static inline void jpeg_dri(void __iomem *regs, unsigned int dri) { unsigned long reg; diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c index f6a3035c4fb7..738a607be43c 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c @@ -41,15 +41,29 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) pm->clock_gate = clk_get(&dev->plat_dev->dev, MFC_GATE_CLK_NAME); if (IS_ERR(pm->clock_gate)) { mfc_err("Failed to get clock-gating control\n"); - ret = -ENOENT; + ret = PTR_ERR(pm->clock_gate); goto err_g_ip_clk; } + + ret = clk_prepare(pm->clock_gate); + if (ret) { + mfc_err("Failed to preapre clock-gating control\n"); + goto err_p_ip_clk; + } + pm->clock = clk_get(&dev->plat_dev->dev, MFC_CLKNAME); if (IS_ERR(pm->clock)) { mfc_err("Failed to get MFC clock\n"); - ret = -ENOENT; + ret = PTR_ERR(pm->clock); goto err_g_ip_clk_2; } + + ret = clk_prepare(pm->clock); + if (ret) { + mfc_err("Failed to prepare MFC clock\n"); + goto err_p_ip_clk_2; + } + atomic_set(&pm->power, 0); #ifdef CONFIG_PM_RUNTIME pm->device = &dev->plat_dev->dev; @@ -59,7 +73,11 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) atomic_set(&clk_ref, 0); #endif return 0; +err_p_ip_clk_2: + clk_put(pm->clock); err_g_ip_clk_2: + clk_unprepare(pm->clock_gate); +err_p_ip_clk: clk_put(pm->clock_gate); err_g_ip_clk: return ret; @@ -67,7 +85,9 @@ err_g_ip_clk: void s5p_mfc_final_pm(struct s5p_mfc_dev *dev) { + clk_unprepare(pm->clock_gate); clk_put(pm->clock_gate); + clk_unprepare(pm->clock); clk_put(pm->clock); #ifdef CONFIG_PM_RUNTIME pm_runtime_disable(pm->device); diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig index f2a09779ec8f..f248b2856720 100644 --- a/drivers/media/video/s5p-tv/Kconfig +++ b/drivers/media/video/s5p-tv/Kconfig @@ -46,6 +46,16 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY as module. It is an I2C driver, that exposes a V4L2 subdev for use by other drivers. +config VIDEO_SAMSUNG_S5P_SII9234 + tristate "Samsung SII9234 Driver" + depends on VIDEO_DEV && VIDEO_V4L2 && I2C + depends on VIDEO_SAMSUNG_S5P_TV + help + Say Y here if you want support for the MHL interface + in S5P Samsung SoC. The driver can be compiled + as module. It is an I2C driver, that exposes a V4L2 + subdev for use by other drivers. + config VIDEO_SAMSUNG_S5P_SDO tristate "Samsung Analog TV Driver" depends on VIDEO_DEV && VIDEO_V4L2 diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/video/s5p-tv/Makefile index 37e4c17663b4..f49e756a2fde 100644 --- a/drivers/media/video/s5p-tv/Makefile +++ b/drivers/media/video/s5p-tv/Makefile @@ -8,6 +8,8 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o s5p-hdmiphy-y += hdmiphy_drv.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SII9234) += s5p-sii9234.o +s5p-sii9234-y += sii9234_drv.o obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o s5p-hdmi-y += hdmi_drv.o obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c index 8b41a0410ab1..4865d25a0e57 100644 --- a/drivers/media/video/s5p-tv/hdmi_drv.c +++ b/drivers/media/video/s5p-tv/hdmi_drv.c @@ -30,6 +30,7 @@ #include <linux/clk.h> #include <linux/regulator/consumer.h> +#include <media/s5p_hdmi.h> #include <media/v4l2-common.h> #include <media/v4l2-dev.h> #include <media/v4l2-device.h> @@ -66,6 +67,8 @@ struct hdmi_device { struct v4l2_device v4l2_dev; /** subdev of HDMIPHY interface */ struct v4l2_subdev *phy_sd; + /** subdev of MHL interface */ + struct v4l2_subdev *mhl_sd; /** configuration of current graphic mode */ const struct hdmi_preset_conf *cur_conf; /** current preset */ @@ -74,10 +77,6 @@ struct hdmi_device { struct hdmi_resources res; }; -struct hdmi_driver_data { - int hdmiphy_bus; -}; - struct hdmi_tg_regs { u8 cmd; u8 h_fsz_l; @@ -129,23 +128,11 @@ struct hdmi_preset_conf { struct v4l2_mbus_framefmt mbus_fmt; }; -/* I2C module and id for HDMIPHY */ -static struct i2c_board_info hdmiphy_info = { - I2C_BOARD_INFO("hdmiphy", 0x38), -}; - -static struct hdmi_driver_data hdmi_driver_data[] = { - { .hdmiphy_bus = 3 }, - { .hdmiphy_bus = 8 }, -}; - static struct platform_device_id hdmi_driver_types[] = { { .name = "s5pv210-hdmi", - .driver_data = (unsigned long)&hdmi_driver_data[0], }, { .name = "exynos4-hdmi", - .driver_data = (unsigned long)&hdmi_driver_data[1], }, { /* end node */ } @@ -587,7 +574,15 @@ static int hdmi_streamon(struct hdmi_device *hdev) if (tries == 0) { dev_err(dev, "hdmiphy's pll could not reach steady state.\n"); v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); - hdmi_dumpregs(hdev, "s_stream"); + hdmi_dumpregs(hdev, "hdmiphy - s_stream"); + return -EIO; + } + + /* starting MHL */ + ret = v4l2_subdev_call(hdev->mhl_sd, video, s_stream, 1); + if (hdev->mhl_sd && ret) { + v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); + hdmi_dumpregs(hdev, "mhl - s_stream"); return -EIO; } @@ -618,6 +613,7 @@ static int hdmi_streamoff(struct hdmi_device *hdev) clk_set_parent(res->sclk_hdmi, res->sclk_pixel); clk_enable(res->sclk_hdmi); + v4l2_subdev_call(hdev->mhl_sd, video, s_stream, 0); v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); hdmi_dumpregs(hdev, "streamoff"); @@ -739,6 +735,7 @@ static int hdmi_runtime_suspend(struct device *dev) struct hdmi_device *hdev = sd_to_hdmi_dev(sd); dev_dbg(dev, "%s\n", __func__); + v4l2_subdev_call(hdev->mhl_sd, core, s_power, 0); hdmi_resource_poweroff(&hdev->res); return 0; } @@ -757,6 +754,11 @@ static int hdmi_runtime_resume(struct device *dev) if (ret) goto fail; + /* starting MHL */ + ret = v4l2_subdev_call(hdev->mhl_sd, core, s_power, 1); + if (hdev->mhl_sd && ret) + goto fail; + dev_dbg(dev, "poweron succeed\n"); return 0; @@ -867,15 +869,21 @@ static int __devinit hdmi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res; - struct i2c_adapter *phy_adapter; + struct i2c_adapter *adapter; struct v4l2_subdev *sd; struct hdmi_device *hdmi_dev = NULL; - struct hdmi_driver_data *drv_data; + struct s5p_hdmi_platform_data *pdata = dev->platform_data; int ret; dev_dbg(dev, "probe start\n"); - hdmi_dev = kzalloc(sizeof(*hdmi_dev), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "platform data is missing\n"); + ret = -ENODEV; + goto fail; + } + + hdmi_dev = devm_kzalloc(&pdev->dev, sizeof(*hdmi_dev), GFP_KERNEL); if (!hdmi_dev) { dev_err(dev, "out of memory\n"); ret = -ENOMEM; @@ -886,7 +894,7 @@ static int __devinit hdmi_probe(struct platform_device *pdev) ret = hdmi_resources_init(hdmi_dev); if (ret) - goto fail_hdev; + goto fail; /* mapping HDMI registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -896,24 +904,26 @@ static int __devinit hdmi_probe(struct platform_device *pdev) goto fail_init; } - hdmi_dev->regs = ioremap(res->start, resource_size(res)); + hdmi_dev->regs = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (hdmi_dev->regs == NULL) { dev_err(dev, "register mapping failed.\n"); ret = -ENXIO; - goto fail_hdev; + goto fail_init; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { dev_err(dev, "get interrupt resource failed.\n"); ret = -ENXIO; - goto fail_regs; + goto fail_init; } - ret = request_irq(res->start, hdmi_irq_handler, 0, "hdmi", hdmi_dev); + ret = devm_request_irq(&pdev->dev, res->start, hdmi_irq_handler, 0, + "hdmi", hdmi_dev); if (ret) { dev_err(dev, "request interrupt failed.\n"); - goto fail_regs; + goto fail_init; } hdmi_dev->irq = res->start; @@ -924,28 +934,54 @@ static int __devinit hdmi_probe(struct platform_device *pdev) ret = v4l2_device_register(NULL, &hdmi_dev->v4l2_dev); if (ret) { dev_err(dev, "could not register v4l2 device.\n"); - goto fail_irq; + goto fail_init; } - drv_data = (struct hdmi_driver_data *) - platform_get_device_id(pdev)->driver_data; - phy_adapter = i2c_get_adapter(drv_data->hdmiphy_bus); - if (phy_adapter == NULL) { - dev_err(dev, "adapter request failed\n"); + /* testing if hdmiphy info is present */ + if (!pdata->hdmiphy_info) { + dev_err(dev, "hdmiphy info is missing in platform data\n"); + ret = -ENXIO; + goto fail_vdev; + } + + adapter = i2c_get_adapter(pdata->hdmiphy_bus); + if (adapter == NULL) { + dev_err(dev, "hdmiphy adapter request failed\n"); ret = -ENXIO; goto fail_vdev; } hdmi_dev->phy_sd = v4l2_i2c_new_subdev_board(&hdmi_dev->v4l2_dev, - phy_adapter, &hdmiphy_info, NULL); + adapter, pdata->hdmiphy_info, NULL); /* on failure or not adapter is no longer useful */ - i2c_put_adapter(phy_adapter); + i2c_put_adapter(adapter); if (hdmi_dev->phy_sd == NULL) { dev_err(dev, "missing subdev for hdmiphy\n"); ret = -ENODEV; goto fail_vdev; } + /* initialization of MHL interface if present */ + if (pdata->mhl_info) { + adapter = i2c_get_adapter(pdata->mhl_bus); + if (adapter == NULL) { + dev_err(dev, "MHL adapter request failed\n"); + ret = -ENXIO; + goto fail_vdev; + } + + hdmi_dev->mhl_sd = v4l2_i2c_new_subdev_board( + &hdmi_dev->v4l2_dev, adapter, + pdata->mhl_info, NULL); + /* on failure or not adapter is no longer useful */ + i2c_put_adapter(adapter); + if (hdmi_dev->mhl_sd == NULL) { + dev_err(dev, "missing subdev for MHL\n"); + ret = -ENODEV; + goto fail_vdev; + } + } + clk_enable(hdmi_dev->res.hdmi); pm_runtime_enable(dev); @@ -962,25 +998,16 @@ static int __devinit hdmi_probe(struct platform_device *pdev) /* storing subdev for call that have only access to struct device */ dev_set_drvdata(dev, sd); - dev_info(dev, "probe sucessful\n"); + dev_info(dev, "probe successful\n"); return 0; fail_vdev: v4l2_device_unregister(&hdmi_dev->v4l2_dev); -fail_irq: - free_irq(hdmi_dev->irq, hdmi_dev); - -fail_regs: - iounmap(hdmi_dev->regs); - fail_init: hdmi_resources_cleanup(hdmi_dev); -fail_hdev: - kfree(hdmi_dev); - fail: dev_err(dev, "probe failed\n"); return ret; @@ -996,11 +1023,8 @@ static int __devexit hdmi_remove(struct platform_device *pdev) clk_disable(hdmi_dev->res.hdmi); v4l2_device_unregister(&hdmi_dev->v4l2_dev); disable_irq(hdmi_dev->irq); - free_irq(hdmi_dev->irq, hdmi_dev); - iounmap(hdmi_dev->regs); hdmi_resources_cleanup(hdmi_dev); - kfree(hdmi_dev); - dev_info(dev, "remove sucessful\n"); + dev_info(dev, "remove successful\n"); return 0; } diff --git a/drivers/media/video/s5p-tv/hdmiphy_drv.c b/drivers/media/video/s5p-tv/hdmiphy_drv.c index 6693f4aff108..0afef77747e5 100644 --- a/drivers/media/video/s5p-tv/hdmiphy_drv.c +++ b/drivers/media/video/s5p-tv/hdmiphy_drv.c @@ -175,14 +175,4 @@ static struct i2c_driver hdmiphy_driver = { .id_table = hdmiphy_id, }; -static int __init hdmiphy_init(void) -{ - return i2c_add_driver(&hdmiphy_driver); -} -module_init(hdmiphy_init); - -static void __exit hdmiphy_exit(void) -{ - i2c_del_driver(&hdmiphy_driver); -} -module_exit(hdmiphy_exit); +module_i2c_driver(hdmiphy_driver); diff --git a/drivers/media/video/s5p-tv/mixer_drv.c b/drivers/media/video/s5p-tv/mixer_drv.c index 00643094b221..a2c0c25ad130 100644 --- a/drivers/media/video/s5p-tv/mixer_drv.c +++ b/drivers/media/video/s5p-tv/mixer_drv.c @@ -444,7 +444,7 @@ static int __devexit mxr_remove(struct platform_device *pdev) kfree(mdev); - dev_info(dev, "remove sucessful\n"); + dev_info(dev, "remove successful\n"); return 0; } diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/video/s5p-tv/sdo_drv.c index 059e7749ce95..f6bca2c20e89 100644 --- a/drivers/media/video/s5p-tv/sdo_drv.c +++ b/drivers/media/video/s5p-tv/sdo_drv.c @@ -301,7 +301,7 @@ static int __devinit sdo_probe(struct platform_device *pdev) struct clk *sclk_vpll; dev_info(dev, "probe start\n"); - sdev = kzalloc(sizeof *sdev, GFP_KERNEL); + sdev = devm_kzalloc(&pdev->dev, sizeof *sdev, GFP_KERNEL); if (!sdev) { dev_err(dev, "not enough memory.\n"); ret = -ENOMEM; @@ -314,14 +314,14 @@ static int __devinit sdo_probe(struct platform_device *pdev) if (res == NULL) { dev_err(dev, "get memory resource failed.\n"); ret = -ENXIO; - goto fail_sdev; + goto fail; } - sdev->regs = ioremap(res->start, resource_size(res)); + sdev->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (sdev->regs == NULL) { dev_err(dev, "register mapping failed.\n"); ret = -ENXIO; - goto fail_sdev; + goto fail; } /* acquiring interrupt */ @@ -329,12 +329,13 @@ static int __devinit sdo_probe(struct platform_device *pdev) if (res == NULL) { dev_err(dev, "get interrupt resource failed.\n"); ret = -ENXIO; - goto fail_regs; + goto fail; } - ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev); + ret = devm_request_irq(&pdev->dev, res->start, sdo_irq_handler, 0, + "s5p-sdo", sdev); if (ret) { dev_err(dev, "request interrupt failed.\n"); - goto fail_regs; + goto fail; } sdev->irq = res->start; @@ -343,7 +344,7 @@ static int __devinit sdo_probe(struct platform_device *pdev) if (IS_ERR_OR_NULL(sdev->sclk_dac)) { dev_err(dev, "failed to get clock 'sclk_dac'\n"); ret = -ENXIO; - goto fail_irq; + goto fail; } sdev->dac = clk_get(dev, "dac"); if (IS_ERR_OR_NULL(sdev->dac)) { @@ -415,12 +416,6 @@ fail_dac: clk_put(sdev->dac); fail_sclk_dac: clk_put(sdev->sclk_dac); -fail_irq: - free_irq(sdev->irq, sdev); -fail_regs: - iounmap(sdev->regs); -fail_sdev: - kfree(sdev); fail: dev_info(dev, "probe failed\n"); return ret; @@ -439,9 +434,6 @@ static int __devexit sdo_remove(struct platform_device *pdev) clk_put(sdev->dacphy); clk_put(sdev->dac); clk_put(sdev->sclk_dac); - free_irq(sdev->irq, sdev); - iounmap(sdev->regs); - kfree(sdev); dev_info(&pdev->dev, "remove successful\n"); return 0; diff --git a/drivers/media/video/s5p-tv/sii9234_drv.c b/drivers/media/video/s5p-tv/sii9234_drv.c new file mode 100644 index 000000000000..0f31eccd7b80 --- /dev/null +++ b/drivers/media/video/s5p-tv/sii9234_drv.c @@ -0,0 +1,432 @@ +/* + * Samsung MHL interface driver + * + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/freezer.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/machine.h> +#include <linux/slab.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> + +#include <media/sii9234.h> +#include <media/v4l2-subdev.h> + +MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>"); +MODULE_DESCRIPTION("Samsung MHL interface driver"); +MODULE_LICENSE("GPL"); + +struct sii9234_context { + struct i2c_client *client; + struct regulator *power; + int gpio_n_reset; + struct v4l2_subdev sd; +}; + +static inline struct sii9234_context *sd_to_context(struct v4l2_subdev *sd) +{ + return container_of(sd, struct sii9234_context, sd); +} + +static inline int sii9234_readb(struct i2c_client *client, int addr) +{ + return i2c_smbus_read_byte_data(client, addr); +} + +static inline int sii9234_writeb(struct i2c_client *client, int addr, int value) +{ + return i2c_smbus_write_byte_data(client, addr, value); +} + +static inline int sii9234_writeb_mask(struct i2c_client *client, int addr, + int value, int mask) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, addr); + if (ret < 0) + return ret; + ret = (ret & ~mask) | (value & mask); + return i2c_smbus_write_byte_data(client, addr, ret); +} + +static inline int sii9234_readb_idx(struct i2c_client *client, int addr) +{ + int ret; + ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); + if (ret < 0) + return ret; + return i2c_smbus_read_byte_data(client, 0xbe); +} + +static inline int sii9234_writeb_idx(struct i2c_client *client, int addr, + int value) +{ + int ret; + ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, 0xbe, value); + return ret; +} + +static inline int sii9234_writeb_idx_mask(struct i2c_client *client, int addr, + int value, int mask) +{ + int ret; + + ret = sii9234_readb_idx(client, addr); + if (ret < 0) + return ret; + ret = (ret & ~mask) | (value & mask); + return sii9234_writeb_idx(client, addr, ret); +} + +static int sii9234_reset(struct sii9234_context *ctx) +{ + struct i2c_client *client = ctx->client; + struct device *dev = &client->dev; + int ret, tries; + + gpio_direction_output(ctx->gpio_n_reset, 1); + mdelay(1); + gpio_direction_output(ctx->gpio_n_reset, 0); + mdelay(1); + gpio_direction_output(ctx->gpio_n_reset, 1); + mdelay(1); + + /* going to TTPI mode */ + ret = sii9234_writeb(client, 0xc7, 0); + if (ret < 0) { + dev_err(dev, "failed to set TTPI mode\n"); + return ret; + } + for (tries = 0; tries < 100 ; ++tries) { + ret = sii9234_readb(client, 0x1b); + if (ret > 0) + break; + if (ret < 0) { + dev_err(dev, "failed to reset device\n"); + return -EIO; + } + mdelay(1); + } + if (tries == 100) { + dev_err(dev, "maximal number of tries reached\n"); + return -EIO; + } + + return 0; +} + +static int sii9234_verify_version(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int family, rev, tpi_rev, dev_id, sub_id, hdcp, id; + + family = sii9234_readb(client, 0x1b); + rev = sii9234_readb(client, 0x1c) & 0x0f; + tpi_rev = sii9234_readb(client, 0x1d) & 0x7f; + dev_id = sii9234_readb_idx(client, 0x0103); + sub_id = sii9234_readb_idx(client, 0x0102); + hdcp = sii9234_readb(client, 0x30); + + if (family < 0 || rev < 0 || tpi_rev < 0 || dev_id < 0 || + sub_id < 0 || hdcp < 0) { + dev_err(dev, "failed to read chip's version\n"); + return -EIO; + } + + id = (dev_id << 8) | sub_id; + + dev_info(dev, "chip: SiL%02x family: %02x, rev: %02x\n", + id, family, rev); + dev_info(dev, "tpi_rev:%02x, hdcp: %02x\n", tpi_rev, hdcp); + if (id != 0x9234) { + dev_err(dev, "not supported chip\n"); + return -ENODEV; + } + + return 0; +} + +static u8 data[][3] = { +/* setup from driver created by doonsoo45.kim */ + { 0x01, 0x05, 0x04 }, /* Enable Auto soft reset on SCDT = 0 */ + { 0x01, 0x08, 0x35 }, /* Power Up TMDS Tx Core */ + { 0x01, 0x0d, 0x1c }, /* HDMI Transcode mode enable */ + { 0x01, 0x2b, 0x01 }, /* Enable HDCP Compliance workaround */ + { 0x01, 0x79, 0x40 }, /* daniel test...MHL_INT */ + { 0x01, 0x80, 0x34 }, /* Enable Rx PLL Clock Value */ + { 0x01, 0x90, 0x27 }, /* Enable CBUS discovery */ + { 0x01, 0x91, 0xe5 }, /* Skip RGND detection */ + { 0x01, 0x92, 0x46 }, /* Force MHD mode */ + { 0x01, 0x93, 0xdc }, /* Disable CBUS pull-up during RGND measurement */ + { 0x01, 0x94, 0x66 }, /* 1.8V CBUS VTH & GND threshold */ + { 0x01, 0x95, 0x31 }, /* RGND block & single discovery attempt */ + { 0x01, 0x96, 0x22 }, /* use 1K and 2K setting */ + { 0x01, 0xa0, 0x10 }, /* SIMG: Term mode */ + { 0x01, 0xa1, 0xfc }, /* Disable internal Mobile HD driver */ + { 0x01, 0xa3, 0xfa }, /* SIMG: Output Swing default EB, 3x Clk Mult */ + { 0x01, 0xa5, 0x80 }, /* SIMG: RGND Hysterisis, 3x mode for Beast */ + { 0x01, 0xa6, 0x0c }, /* SIMG: Swing Offset */ + { 0x02, 0x3d, 0x3f }, /* Power up CVCC 1.2V core */ + { 0x03, 0x00, 0x00 }, /* SIMG: correcting HW default */ + { 0x03, 0x11, 0x01 }, /* Enable TxPLL Clock */ + { 0x03, 0x12, 0x15 }, /* Enable Tx Clock Path & Equalizer */ + { 0x03, 0x13, 0x60 }, /* SIMG: Set termination value */ + { 0x03, 0x14, 0xf0 }, /* SIMG: Change CKDT level */ + { 0x03, 0x17, 0x07 }, /* SIMG: PLL Calrefsel */ + { 0x03, 0x1a, 0x20 }, /* VCO Cal */ + { 0x03, 0x22, 0xe0 }, /* SIMG: Auto EQ */ + { 0x03, 0x23, 0xc0 }, /* SIMG: Auto EQ */ + { 0x03, 0x24, 0xa0 }, /* SIMG: Auto EQ */ + { 0x03, 0x25, 0x80 }, /* SIMG: Auto EQ */ + { 0x03, 0x26, 0x60 }, /* SIMG: Auto EQ */ + { 0x03, 0x27, 0x40 }, /* SIMG: Auto EQ */ + { 0x03, 0x28, 0x20 }, /* SIMG: Auto EQ */ + { 0x03, 0x29, 0x00 }, /* SIMG: Auto EQ */ + { 0x03, 0x31, 0x0b }, /* SIMG: Rx PLL BW value from I2C BW ~ 4MHz */ + { 0x03, 0x45, 0x06 }, /* SIMG: DPLL Mode */ + { 0x03, 0x4b, 0x06 }, /* SIMG: Correcting HW default */ + { 0x03, 0x4c, 0xa0 }, /* Manual zone control */ + { 0x03, 0x4d, 0x02 }, /* SIMG: PLL Mode Value (order is important) */ +}; + +static int sii9234_set_internal(struct sii9234_context *ctx) +{ + struct i2c_client *client = ctx->client; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(data); ++i) { + int addr = (data[i][0] << 8) | data[i][1]; + ret = sii9234_writeb_idx(client, addr, data[i][2]); + if (ret < 0) + return ret; + } + return 0; +} + +static int sii9234_runtime_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct sii9234_context *ctx = sd_to_context(sd); + struct i2c_client *client = ctx->client; + + dev_info(dev, "suspend start\n"); + + sii9234_writeb_mask(client, 0x1e, 3, 3); + regulator_disable(ctx->power); + + return 0; +} + +static int sii9234_runtime_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct sii9234_context *ctx = sd_to_context(sd); + struct i2c_client *client = ctx->client; + int ret; + + dev_info(dev, "resume start\n"); + regulator_enable(ctx->power); + + ret = sii9234_reset(ctx); + if (ret) + goto fail; + + /* enable tpi */ + ret = sii9234_writeb_mask(client, 0x1e, 1, 0); + if (ret < 0) + goto fail; + ret = sii9234_set_internal(ctx); + if (ret < 0) + goto fail; + + return 0; + +fail: + dev_err(dev, "failed to resume\n"); + regulator_disable(ctx->power); + + return ret; +} + +static const struct dev_pm_ops sii9234_pm_ops = { + .runtime_suspend = sii9234_runtime_suspend, + .runtime_resume = sii9234_runtime_resume, +}; + +static int sii9234_s_power(struct v4l2_subdev *sd, int on) +{ + struct sii9234_context *ctx = sd_to_context(sd); + int ret; + + if (on) + ret = pm_runtime_get_sync(&ctx->client->dev); + else + ret = pm_runtime_put(&ctx->client->dev); + /* only values < 0 indicate errors */ + return IS_ERR_VALUE(ret) ? ret : 0; +} + +static int sii9234_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct sii9234_context *ctx = sd_to_context(sd); + + /* (dis/en)able TDMS output */ + sii9234_writeb_mask(ctx->client, 0x1a, enable ? 0 : ~0 , 1 << 4); + return 0; +} + +static const struct v4l2_subdev_core_ops sii9234_core_ops = { + .s_power = sii9234_s_power, +}; + +static const struct v4l2_subdev_video_ops sii9234_video_ops = { + .s_stream = sii9234_s_stream, +}; + +static const struct v4l2_subdev_ops sii9234_ops = { + .core = &sii9234_core_ops, + .video = &sii9234_video_ops, +}; + +static int __devinit sii9234_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct sii9234_platform_data *pdata = dev->platform_data; + struct sii9234_context *ctx; + int ret; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(dev, "out of memory\n"); + ret = -ENOMEM; + goto fail; + } + ctx->client = client; + + ctx->power = regulator_get(dev, "hdmi-en"); + if (IS_ERR(ctx->power)) { + dev_err(dev, "failed to acquire regulator hdmi-en\n"); + ret = PTR_ERR(ctx->power); + goto fail_ctx; + } + + ctx->gpio_n_reset = pdata->gpio_n_reset; + ret = gpio_request(ctx->gpio_n_reset, "MHL_RST"); + if (ret) { + dev_err(dev, "failed to acquire MHL_RST gpio\n"); + goto fail_power; + } + + v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops); + + pm_runtime_enable(dev); + + /* enable device */ + ret = pm_runtime_get_sync(dev); + if (ret) + goto fail_pm; + + /* verify chip version */ + ret = sii9234_verify_version(client); + if (ret) + goto fail_pm_get; + + /* stop processing */ + pm_runtime_put(dev); + + dev_info(dev, "probe successful\n"); + + return 0; + +fail_pm_get: + pm_runtime_put_sync(dev); + +fail_pm: + pm_runtime_disable(dev); + gpio_free(ctx->gpio_n_reset); + +fail_power: + regulator_put(ctx->power); + +fail_ctx: + kfree(ctx); + +fail: + dev_err(dev, "probe failed\n"); + + return ret; +} + +static int __devexit sii9234_remove(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct sii9234_context *ctx = sd_to_context(sd); + + pm_runtime_disable(dev); + gpio_free(ctx->gpio_n_reset); + regulator_put(ctx->power); + kfree(ctx); + + dev_info(dev, "remove successful\n"); + + return 0; +} + + +static const struct i2c_device_id sii9234_id[] = { + { "SII9234", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, sii9234_id); +static struct i2c_driver sii9234_driver = { + .driver = { + .name = "sii9234", + .owner = THIS_MODULE, + .pm = &sii9234_pm_ops, + }, + .probe = sii9234_probe, + .remove = __devexit_p(sii9234_remove), + .id_table = sii9234_id, +}; + +static int __init sii9234_init(void) +{ + return i2c_add_driver(&sii9234_driver); +} +module_init(sii9234_init); + +static void __exit sii9234_exit(void) +{ + i2c_del_driver(&sii9234_driver); +} +module_exit(sii9234_exit); diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index 99a2ac16f9e5..0caac50d7cf4 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -539,15 +539,4 @@ static struct i2c_driver saa6588_driver = { .id_table = saa6588_id, }; -static __init int init_saa6588(void) -{ - return i2c_add_driver(&saa6588_driver); -} - -static __exit void exit_saa6588(void) -{ - i2c_del_driver(&saa6588_driver); -} - -module_init(init_saa6588); -module_exit(exit_saa6588); +module_i2c_driver(saa6588_driver); diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 99664205ef4e..51cd4c8f0520 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -491,15 +491,4 @@ static struct i2c_driver saa7110_driver = { .id_table = saa7110_id, }; -static __init int init_saa7110(void) -{ - return i2c_add_driver(&saa7110_driver); -} - -static __exit void exit_saa7110(void) -{ - i2c_del_driver(&saa7110_driver); -} - -module_init(init_saa7110); -module_exit(exit_saa7110); +module_i2c_driver(saa7110_driver); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 0ef5484696b6..2107336cd836 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1724,15 +1724,4 @@ static struct i2c_driver saa711x_driver = { .id_table = saa711x_id, }; -static __init int init_saa711x(void) -{ - return i2c_add_driver(&saa711x_driver); -} - -static __exit void exit_saa711x(void) -{ - i2c_del_driver(&saa711x_driver); -} - -module_init(init_saa711x); -module_exit(exit_saa711x); +module_i2c_driver(saa711x_driver); diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index ad964616c9d2..39c90b08eea8 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -852,15 +852,4 @@ static struct i2c_driver saa7127_driver = { .id_table = saa7127_id, }; -static __init int init_saa7127(void) -{ - return i2c_add_driver(&saa7127_driver); -} - -static __exit void exit_saa7127(void) -{ - i2c_del_driver(&saa7127_driver); -} - -module_init(init_saa7127); -module_exit(exit_saa7127); +module_i2c_driver(saa7127_driver); diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile index a646ccf51696..da3899329f52 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/video/saa7134/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/video +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index f9f29cc93a8a..f147b05bd860 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -1001,18 +1001,7 @@ static struct i2c_driver saa6752hs_driver = { .id_table = saa6752hs_id, }; -static __init int init_saa6752hs(void) -{ - return i2c_add_driver(&saa6752hs_driver); -} - -static __exit void exit_saa6752hs(void) -{ - i2c_del_driver(&saa6752hs_driver); -} - -module_init(init_saa6752hs); -module_exit(exit_saa6752hs); +module_i2c_driver(saa6752hs_driver); /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 065d0f6be4a0..53aae5968ffb 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -33,6 +33,7 @@ #include "tea5767.h" #include "tda18271.h" #include "xc5000.h" +#include "s5h1411.h" /* commly used strings */ static char name_mute[] = "mute"; @@ -5712,6 +5713,36 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1, } }, }, + [SAA7134_BOARD_KWORLD_PC150U] = { + .name = "Kworld PC150-U", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 1 << 21, + .ts_type = SAA7134_MPEG_TS_PARALLEL, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + }, { + .name = name_comp, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0000000, + }, + }, }; @@ -6306,6 +6337,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */ },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x17de, + .subdevice = 0xa134, + .driver_data = SAA7134_BOARD_KWORLD_PC150U, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, .subvendor = 0x1461, .subdevice = 0x7360, @@ -7134,6 +7171,23 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev, return 0; } +static int saa7134_kworld_pc150u_toggle_agc(struct saa7134_dev *dev, + enum tda18271_mode mode) +{ + switch (mode) { + case TDA18271_ANALOG: + saa7134_set_gpio(dev, 18, 0); + break; + case TDA18271_DIGITAL: + saa7134_set_gpio(dev, 18, 1); + msleep(30); + break; + default: + return -EINVAL; + } + return 0; +} + static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, int command, int arg) { @@ -7150,6 +7204,9 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg); break; + case SAA7134_BOARD_KWORLD_PC150U: + ret = saa7134_kworld_pc150u_toggle_agc(dev, arg); + break; default: break; } @@ -7171,6 +7228,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, case SAA7134_BOARD_HAUPPAUGE_HVR1120: case SAA7134_BOARD_AVERMEDIA_M733A: case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: + case SAA7134_BOARD_KWORLD_PC150U: case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: /* tda8290 + tda18271 */ ret = saa7134_tda8290_18271_callback(dev, command, arg); @@ -7452,6 +7510,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_X7: case SAA7134_BOARD_BEHOLD_H7: case SAA7134_BOARD_BEHOLD_A7: + case SAA7134_BOARD_KWORLD_PC150U: dev->has_remote = SAA7134_REMOTE_I2C; break; case SAA7134_BOARD_AVERMEDIA_A169_B: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 089fa0fb5c94..aaa5c97a7216 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -61,6 +61,7 @@ #include "zl10036.h" #include "zl10039.h" #include "mt312.h" +#include "s5h1411.h" MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); @@ -1158,6 +1159,33 @@ static struct tda18271_config prohdtv_pro2_tda18271_config = { .output_opt = TDA18271_OUTPUT_LT_OFF, }; +static struct tda18271_std_map kworld_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config kworld_pc150u_tda18271_config = { + .std_map = &kworld_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, + .config = 3, /* Use tuner callback for AGC */ + .rf_cal_on_startup = 1 +}; + +static struct s5h1411_config kworld_s5h1411_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .qam_if = S5H1411_IF_4000, + .vsb_if = S5H1411_IF_3250, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = + S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + + /* ================================================================== * Core code */ @@ -1438,6 +1466,22 @@ static int dvb_init(struct saa7134_dev *dev) &dev->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D); break; + case SAA7134_BOARD_KWORLD_PC150U: + saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &kworld_s5h1411_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &kworld_pc150u_tda18271_config); + } + break; case SAA7134_BOARD_FLYDVBS_LR300: fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 2d3f6d265bbf..a176ec3285e0 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -254,7 +254,9 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, addr = msgs[i].addr << 1; if (msgs[i].flags & I2C_M_RD) addr |= 1; - if (i > 0 && msgs[i].flags & I2C_M_RD && msgs[i].addr != 0x40) { + if (i > 0 && msgs[i].flags & + I2C_M_RD && msgs[i].addr != 0x40 && + msgs[i].addr != 0x19) { /* workaround for a saa7134 i2c bug * needed to talk to the mt352 demux * thanks to pinnacle for the hint */ @@ -279,6 +281,16 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, d1printk("%02x", rc); msgs[i].buf[byte] = rc; } + /* discard mysterious extra byte when reading + from Samsung S5H1411. i2c bus gets error + if we do not. */ + if (0x19 == msgs[i].addr) { + d1printk(" ?"); + rc = i2c_recv_byte(dev); + if (rc < 0) + goto err; + d1printk("%02x", rc); + } } else { /* write bytes */ d2printk("write bytes\n"); diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 22ecd7297d2d..48d2878699b7 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -210,6 +210,54 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, return 1; } +/* copied and modified from get_key_msi_tvanywhere_plus() */ +static int get_key_kworld_pc150u(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + unsigned int gpio; + + /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c->adapter->algo_data; + if (dev == NULL) { + i2cdprintk("get_key_kworld_pc150u: " + "ir->c->adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x100 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x100 is not low. */ + + if (gpio & 0x100) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -901,6 +949,21 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) msg_msi.addr, dev->i2c_adap.name, (1 == rc) ? "yes" : "no"); break; + case SAA7134_BOARD_KWORLD_PC150U: + /* copied and modified from MSI TV@nywhere Plus */ + dev->init_data.name = "Kworld PC150-U"; + dev->init_data.get_key = get_key_kworld_pc150u; + dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U; + info.addr = 0x30; + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... + REVISIT: might no longer be needed */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk("probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); + break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: dev->init_data.name = "HVR 1110"; dev->init_data.get_key = get_key_hvr1110; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 42fba4f93c72..f625060e6a0f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -126,8 +126,8 @@ struct saa7134_card_ir { unsigned users; u32 polling; - u32 last_gpio; - u32 mask_keycode, mask_keydown, mask_keyup; + u32 last_gpio; + u32 mask_keycode, mask_keydown, mask_keyup; bool running; bool active; @@ -331,6 +331,7 @@ struct saa7134_card_ir { #define SAA7134_BOARD_BEHOLD_501 186 #define SAA7134_BOARD_BEHOLD_503FM 187 #define SAA7134_BOARD_SENSORAY811_911 188 +#define SAA7134_BOARD_KWORLD_PC150U 189 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/video/saa7164/Makefile index ecd5811dc486..068443af30c8 100644 --- a/drivers/media/video/saa7164/Makefile +++ b/drivers/media/video/saa7164/Makefile @@ -4,9 +4,9 @@ saa7164-objs := saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \ obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o -ccflags-y += -Idrivers/media/video -ccflags-y += -Idrivers/media/common/tuners -ccflags-y += -Idrivers/media/dvb/dvb-core -ccflags-y += -Idrivers/media/dvb/frontends +ccflags-y += -I$(srctree)/drivers/media/video +ccflags-y += -I$(srctree)/drivers/media/common/tuners +ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb/frontends ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c index 2fd38a01887f..a9ed686ad08a 100644 --- a/drivers/media/video/saa7164/saa7164-encoder.c +++ b/drivers/media/video/saa7164/saa7164-encoder.c @@ -791,11 +791,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, return 0; } -static int vidioc_log_status(struct file *file, void *priv) -{ - return 0; -} - static int fill_queryctrl(struct saa7164_encoder_params *params, struct v4l2_queryctrl *c) { @@ -1347,7 +1342,6 @@ static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, - .vidioc_log_status = vidioc_log_status, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_chip_ident = saa7164_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c index e2e034158718..273cf807401c 100644 --- a/drivers/media/video/saa7164/saa7164-vbi.c +++ b/drivers/media/video/saa7164/saa7164-vbi.c @@ -730,11 +730,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, return 0; } -static int vidioc_log_status(struct file *file, void *priv) -{ - return 0; -} - static int fill_queryctrl(struct saa7164_vbi_params *params, struct v4l2_queryctrl *c) { @@ -1256,7 +1251,6 @@ static const struct v4l2_ioctl_ops vbi_ioctl_ops = { .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, - .vidioc_log_status = vidioc_log_status, .vidioc_queryctrl = vidioc_queryctrl, #if 0 .vidioc_g_chip_ident = saa7164_g_chip_ident, diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c index b6172c2c517e..1e84466515aa 100644 --- a/drivers/media/video/saa717x.c +++ b/drivers/media/video/saa717x.c @@ -1375,15 +1375,4 @@ static struct i2c_driver saa717x_driver = { .id_table = saa717x_id, }; -static __init int init_saa717x(void) -{ - return i2c_add_driver(&saa717x_driver); -} - -static __exit void exit_saa717x(void) -{ - i2c_del_driver(&saa717x_driver); -} - -module_init(init_saa717x); -module_exit(exit_saa717x); +module_i2c_driver(saa717x_driver); diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 96f56c2f11f3..2c6b65c76e2b 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -374,15 +374,4 @@ static struct i2c_driver saa7185_driver = { .id_table = saa7185_id, }; -static __init int init_saa7185(void) -{ - return i2c_add_driver(&saa7185_driver); -} - -static __exit void exit_saa7185(void) -{ - i2c_del_driver(&saa7185_driver); -} - -module_init(init_saa7185); -module_exit(exit_saa7185); +module_i2c_driver(saa7185_driver); diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c index 211fa25a1239..d7d1670e0ca3 100644 --- a/drivers/media/video/saa7191.c +++ b/drivers/media/video/saa7191.c @@ -656,15 +656,4 @@ static struct i2c_driver saa7191_driver = { .id_table = saa7191_id, }; -static __init int init_saa7191(void) -{ - return i2c_add_driver(&saa7191_driver); -} - -static __exit void exit_saa7191(void) -{ - i2c_del_driver(&saa7191_driver); -} - -module_init(init_saa7191); -module_exit(exit_saa7191); +module_i2c_driver(saa7191_driver); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index f854d85a387c..424dfacd263a 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -112,6 +112,10 @@ struct sh_mobile_ceu_dev { u32 cflcr; + /* static max sizes either from platform data or default */ + int max_width; + int max_height; + enum v4l2_field field; int sequence; @@ -1081,7 +1085,15 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int if (ret < 0) return ret; - while ((mf.width > 2560 || mf.height > 1920) && shift < 4) { + /* + * All currently existing CEU implementations support 2560x1920 + * or larger frames. If the sensor is proposing too big a frame, + * don't bother with possibly supportred by the CEU larger + * sizes, just try VGA multiples. If needed, this can be + * adjusted in the future. + */ + while ((mf.width > pcdev->max_width || + mf.height > pcdev->max_height) && shift < 4) { /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; @@ -1377,6 +1389,8 @@ static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop, static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_mbus_framefmt *mf, bool ceu_can_scale) { + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct sh_mobile_ceu_dev *pcdev = ici->priv; struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; @@ -1410,8 +1424,8 @@ static int client_s_fmt(struct soc_camera_device *icd, if (ret < 0) return ret; - max_width = min(cap.bounds.width, 2560); - max_height = min(cap.bounds.height, 1920); + max_width = min(cap.bounds.width, pcdev->max_width); + max_height = min(cap.bounds.height, pcdev->max_height); /* Camera set a format, but geometry is not precise, try to improve */ tmp_w = mf->width; @@ -1551,7 +1565,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, if (ret < 0) return ret; - if (mf.width > 2560 || mf.height > 1920) + if (mf.width > pcdev->max_width || mf.height > pcdev->max_height) return -EINVAL; /* 4. Calculate camera scales */ @@ -1834,6 +1848,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct sh_mobile_ceu_dev *pcdev = ici->priv; const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); @@ -1854,8 +1870,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, /* FIXME: calculate using depth and bus width */ /* CFSZR requires height and width to be 4-pixel aligned */ - v4l_bound_align_image(&pix->width, 2, 2560, 2, - &pix->height, 4, 1920, 2, 0); + v4l_bound_align_image(&pix->width, 2, pcdev->max_width, 2, + &pix->height, 4, pcdev->max_height, 2, 0); width = pix->width; height = pix->height; @@ -1890,8 +1906,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, * requested a bigger rectangle, it will not return a * smaller one. */ - mf.width = 2560; - mf.height = 1920; + mf.width = pcdev->max_width; + mf.height = pcdev->max_height; ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), video, try_mbus_fmt, &mf); @@ -2082,6 +2098,9 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) goto exit_kfree; } + pcdev->max_width = pcdev->pdata->max_width ? : 2560; + pcdev->max_height = pcdev->pdata->max_height ? : 1920; + base = ioremap_nocache(res->start, resource_size(res)); if (!base) { err = -ENXIO; diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b82710745ba8..eb25756a07af 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -526,10 +526,6 @@ static int soc_camera_open(struct file *file) }, }; - ret = soc_camera_power_on(icd, icl); - if (ret < 0) - goto epower; - /* The camera could have been already on, try to reset */ if (icl->reset) icl->reset(icd->pdev); @@ -540,6 +536,10 @@ static int soc_camera_open(struct file *file) goto eiciadd; } + ret = soc_camera_power_on(icd, icl); + if (ret < 0) + goto epower; + pm_runtime_enable(&icd->vdev->dev); ret = pm_runtime_resume(&icd->vdev->dev); if (ret < 0 && ret != -ENOSYS) @@ -578,10 +578,10 @@ einitvb: esfmt: pm_runtime_disable(&icd->vdev->dev); eresume: - ici->ops->remove(icd); -eiciadd: soc_camera_power_off(icd, icl); epower: + ici->ops->remove(icd); +eiciadd: icd->use_count--; module_put(ici->ops->owner); @@ -1050,6 +1050,14 @@ static int soc_camera_probe(struct soc_camera_device *icd) if (ret < 0) goto ereg; + /* The camera could have been already on, try to reset */ + if (icl->reset) + icl->reset(icd->pdev); + + ret = ici->ops->add(icd); + if (ret < 0) + goto eadd; + /* * This will not yet call v4l2_subdev_core_ops::s_power(1), because the * subdevice has not been initialised yet. We'll have to call it once @@ -1060,14 +1068,6 @@ static int soc_camera_probe(struct soc_camera_device *icd) if (ret < 0) goto epower; - /* The camera could have been already on, try to reset */ - if (icl->reset) - icl->reset(icd->pdev); - - ret = ici->ops->add(icd); - if (ret < 0) - goto eadd; - /* Must have icd->vdev before registering the device */ ret = video_dev_create(icd); if (ret < 0) @@ -1165,10 +1165,10 @@ eadddev: video_device_release(icd->vdev); icd->vdev = NULL; evdc: - ici->ops->remove(icd); -eadd: soc_camera_power_off(icd, icl); epower: + ici->ops->remove(icd); +eadd: regulator_bulk_free(icl->num_regulators, icl->regulators); ereg: v4l2_ctrl_handler_free(&icd->ctrl_handler); diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c index d1b07aceaf94..e9d95bda2ab1 100644 --- a/drivers/media/video/sr030pc30.c +++ b/drivers/media/video/sr030pc30.c @@ -864,18 +864,7 @@ static struct i2c_driver sr030pc30_i2c_driver = { .id_table = sr030pc30_id, }; -static int __init sr030pc30_init(void) -{ - return i2c_add_driver(&sr030pc30_i2c_driver); -} - -static void __exit sr030pc30_exit(void) -{ - i2c_del_driver(&sr030pc30_i2c_driver); -} - -module_init(sr030pc30_init); -module_exit(sr030pc30_exit); +module_i2c_driver(sr030pc30_i2c_driver); MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver"); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index bd218545da9c..f7707e65761e 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -482,15 +482,4 @@ static struct i2c_driver tda7432_driver = { .id_table = tda7432_id, }; -static __init int init_tda7432(void) -{ - return i2c_add_driver(&tda7432_driver); -} - -static __exit void exit_tda7432(void) -{ - i2c_del_driver(&tda7432_driver); -} - -module_init(init_tda7432); -module_exit(exit_tda7432); +module_i2c_driver(tda7432_driver); diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index 22fa8202d5ca..465d7086babf 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -208,15 +208,4 @@ static struct i2c_driver tda9840_driver = { .id_table = tda9840_id, }; -static __init int init_tda9840(void) -{ - return i2c_add_driver(&tda9840_driver); -} - -static __exit void exit_tda9840(void) -{ - i2c_del_driver(&tda9840_driver); -} - -module_init(init_tda9840); -module_exit(exit_tda9840); +module_i2c_driver(tda9840_driver); diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index 827425c5b866..d1d6ea1dd273 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -184,15 +184,4 @@ static struct i2c_driver tea6415c_driver = { .id_table = tea6415c_id, }; -static __init int init_tea6415c(void) -{ - return i2c_add_driver(&tea6415c_driver); -} - -static __exit void exit_tea6415c(void) -{ - i2c_del_driver(&tea6415c_driver); -} - -module_init(init_tea6415c); -module_exit(exit_tea6415c); +module_i2c_driver(tea6415c_driver); diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index f350b6c24500..38757217a074 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -166,15 +166,4 @@ static struct i2c_driver tea6420_driver = { .id_table = tea6420_id, }; -static __init int init_tea6420(void) -{ - return i2c_add_driver(&tea6420_driver); -} - -static __exit void exit_tea6420(void) -{ - i2c_del_driver(&tea6420_driver); -} - -module_init(init_tea6420); -module_exit(exit_tea6420); +module_i2c_driver(tea6420_driver); diff --git a/drivers/media/video/ths7303.c b/drivers/media/video/ths7303.c index 61b1dd118364..e5c0eedebc58 100644 --- a/drivers/media/video/ths7303.c +++ b/drivers/media/video/ths7303.c @@ -137,16 +137,4 @@ static struct i2c_driver ths7303_driver = { .id_table = ths7303_id, }; -static int __init ths7303_init(void) -{ - return i2c_add_driver(&ths7303_driver); -} - -static void __exit ths7303_exit(void) -{ - i2c_del_driver(&ths7303_driver); -} - -module_init(ths7303_init); -module_exit(ths7303_exit); - +module_i2c_driver(ths7303_driver); diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c index 286ec7e7062a..809a75a558ee 100644 --- a/drivers/media/video/tlv320aic23b.c +++ b/drivers/media/video/tlv320aic23b.c @@ -227,15 +227,4 @@ static struct i2c_driver tlv320aic23b_driver = { .id_table = tlv320aic23b_id, }; -static __init int init_tlv320aic23b(void) -{ - return i2c_add_driver(&tlv320aic23b_driver); -} - -static __exit void exit_tlv320aic23b(void) -{ - i2c_del_driver(&tlv320aic23b_driver); -} - -module_init(init_tlv320aic23b); -module_exit(exit_tlv320aic23b); +module_i2c_driver(tlv320aic23b_driver); diff --git a/drivers/media/video/tm6000/tm6000-input.c b/drivers/media/video/tm6000/tm6000-input.c index 7844607dd45a..859eb90e4d56 100644 --- a/drivers/media/video/tm6000/tm6000-input.c +++ b/drivers/media/video/tm6000/tm6000-input.c @@ -481,8 +481,6 @@ int tm6000_ir_fini(struct tm6000_core *dev) dprintk(2, "%s\n",__func__); - rc_unregister_device(ir->rc); - if (!ir->polling) __tm6000_ir_int_stop(ir->rc); @@ -492,6 +490,7 @@ int tm6000_ir_fini(struct tm6000_core *dev) tm6000_flash_led(dev, 0); ir->pwled = 0; + rc_unregister_device(ir->rc); kfree(ir); dev->ir = NULL; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 4059ea178c2d..a5c6397ad591 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -380,6 +380,21 @@ static void set_type(struct i2c_client *c, unsigned int type, tune_now = 0; break; } + case TUNER_XC5000C: + { + struct xc5000_config xc5000c_cfg = { + .i2c_address = t->i2c->addr, + /* if_khz will be set at dvb_attach() */ + .if_khz = 0, + .chip_id = XC5000C, + }; + + if (!dvb_attach(xc5000_attach, + &t->fe, t->i2c->adapter, &xc5000c_cfg)) + goto attach_failed; + tune_now = 0; + break; + } case TUNER_NXP_TDA18271: { struct tda18271_config cfg = { @@ -1314,18 +1329,7 @@ static struct i2c_driver tuner_driver = { .id_table = tuner_id, }; -static __init int init_tuner(void) -{ - return i2c_add_driver(&tuner_driver); -} - -static __exit void exit_tuner(void) -{ - i2c_del_driver(&tuner_driver); -} - -module_init(init_tuner); -module_exit(exit_tuner); +module_i2c_driver(tuner_driver); MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index f22dbef9b95b..c5b1a7365e4f 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -2078,15 +2078,4 @@ static struct i2c_driver tvaudio_driver = { .id_table = tvaudio_id, }; -static __init int init_tvaudio(void) -{ - return i2c_add_driver(&tvaudio_driver); -} - -static __exit void exit_tvaudio(void) -{ - i2c_del_driver(&tvaudio_driver); -} - -module_init(init_tvaudio); -module_exit(exit_tvaudio); +module_i2c_driver(tvaudio_driver); diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 6103d1b1081e..3b6cf034976a 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -286,8 +286,16 @@ hauppauge_tuner[] = { TUNER_ABSENT, "MaxLinear 301"}, { TUNER_ABSENT, "Mirics MSi001"}, { TUNER_ABSENT, "MaxLinear MxL241SF"}, - { TUNER_ABSENT, "Xceive XC5000C"}, + { TUNER_XC5000C, "Xceive XC5000C"}, { TUNER_ABSENT, "Montage M68TS2020"}, + { TUNER_ABSENT, "Siano SMS1530"}, + { TUNER_ABSENT, "Dibcom 7090"}, + { TUNER_ABSENT, "Xceive XC5200C"}, + { TUNER_ABSENT, "NXP 18273"}, + { TUNER_ABSENT, "Montage M88TS2022"}, + /* 180-189 */ + { TUNER_ABSENT, "NXP 18272M"}, + { TUNER_ABSENT, "NXP 18272S"}, }; /* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index dd26cacd0556..cd615c1d6011 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -1163,15 +1163,4 @@ static struct i2c_driver tvp514x_driver = { .id_table = tvp514x_id, }; -static int __init tvp514x_init(void) -{ - return i2c_add_driver(&tvp514x_driver); -} - -static void __exit tvp514x_exit(void) -{ - i2c_del_driver(&tvp514x_driver); -} - -module_init(tvp514x_init); -module_exit(tvp514x_exit); +module_i2c_driver(tvp514x_driver); diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 6be9910a6e24..1326e11cf4a9 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -17,6 +17,13 @@ #include "tvp5150_reg.h" +#define TVP5150_H_MAX 720 +#define TVP5150_V_MAX_525_60 480 +#define TVP5150_V_MAX_OTHERS 576 +#define TVP5150_MAX_CROP_LEFT 511 +#define TVP5150_MAX_CROP_TOP 127 +#define TVP5150_CROP_SHIFT 2 + MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); @@ -29,6 +36,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); struct tvp5150 { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; + struct v4l2_rect rect; v4l2_std_id norm; /* Current set standard */ u32 input; @@ -732,6 +740,13 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) if (decoder->norm == std) return 0; + /* Change cropping height limits */ + if (std & V4L2_STD_525_60) + decoder->rect.height = TVP5150_V_MAX_525_60; + else + decoder->rect.height = TVP5150_V_MAX_OTHERS; + + return tvp5150_set_std(sd, std); } @@ -828,11 +843,8 @@ static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, else std = decoder->norm; - f->width = 720; - if (std & V4L2_STD_525_60) - f->height = 480; - else - f->height = 576; + f->width = decoder->rect.width; + f->height = decoder->rect.height; f->code = V4L2_MBUS_FMT_YUYV8_2X8; f->field = V4L2_FIELD_SEQ_TB; @@ -843,6 +855,99 @@ static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, return 0; } +static int tvp5150_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std; + int hmax; + + v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n", + __func__, rect.left, rect.top, rect.width, rect.height); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + /* tvp5150 has some special limits */ + rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT); + rect.width = clamp(rect.width, + TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left, + TVP5150_H_MAX - rect.left); + rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP); + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + hmax = TVP5150_V_MAX_525_60; + else + hmax = TVP5150_V_MAX_OTHERS; + + rect.height = clamp(rect.height, + hmax - TVP5150_MAX_CROP_TOP - rect.top, + hmax - rect.top); + + tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top); + tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, + rect.top + rect.height - hmax); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB, + rect.left >> TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB, + rect.left | (1 << TVP5150_CROP_SHIFT)); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB, + (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >> + TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB, + rect.left + rect.width - TVP5150_MAX_CROP_LEFT); + + decoder->rect = rect; + + return 0; +} + +static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + + a->c = decoder->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + v4l2_std_id std; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = TVP5150_H_MAX; + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + a->bounds.height = TVP5150_V_MAX_525_60; + else + a->bounds.height = TVP5150_V_MAX_OTHERS; + + a->defrect = a->bounds; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + /**************************************************************************** I2C Command ****************************************************************************/ @@ -998,6 +1103,10 @@ static const struct v4l2_subdev_video_ops tvp5150_video_ops = { .enum_mbus_fmt = tvp5150_enum_mbus_fmt, .s_mbus_fmt = tvp5150_mbus_fmt, .try_mbus_fmt = tvp5150_mbus_fmt, + .g_mbus_fmt = tvp5150_mbus_fmt, + .s_crop = tvp5150_s_crop, + .g_crop = tvp5150_g_crop, + .cropcap = tvp5150_cropcap, }; static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { @@ -1083,6 +1192,15 @@ static int tvp5150_probe(struct i2c_client *c, } v4l2_ctrl_handler_setup(&core->hdl); + /* Default is no cropping */ + core->rect.top = 0; + if (tvp5150_read_std(sd) & V4L2_STD_525_60) + core->rect.height = TVP5150_V_MAX_525_60; + else + core->rect.height = TVP5150_V_MAX_OTHERS; + core->rect.left = 0; + core->rect.width = TVP5150_H_MAX; + if (debug > 1) tvp5150_log_status(sd); return 0; @@ -1121,15 +1239,4 @@ static struct i2c_driver tvp5150_driver = { .id_table = tvp5150_id, }; -static __init int init_tvp5150(void) -{ - return i2c_add_driver(&tvp5150_driver); -} - -static __exit void exit_tvp5150(void) -{ - i2c_del_driver(&tvp5150_driver); -} - -module_init(init_tvp5150); -module_exit(exit_tvp5150); +module_i2c_driver(tvp5150_driver); diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c index 236c559d5f51..d7676d85c4df 100644 --- a/drivers/media/video/tvp7002.c +++ b/drivers/media/video/tvp7002.c @@ -1069,27 +1069,4 @@ static struct i2c_driver tvp7002_driver = { .id_table = tvp7002_id, }; -/* - * tvp7002_init - Initialize driver via I2C interface - * - * Register the TVP7002 driver. - * Return 0 on success or error code on failure. - */ -static int __init tvp7002_init(void) -{ - return i2c_add_driver(&tvp7002_driver); -} - -/* - * tvp7002_exit - Remove driver via I2C interface - * - * Unregister the TVP7002 driver. - * Returns nothing. - */ -static void __exit tvp7002_exit(void) -{ - i2c_del_driver(&tvp7002_driver); -} - -module_init(tvp7002_init); -module_exit(tvp7002_exit); +module_i2c_driver(tvp7002_driver); diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c index a514fa61116c..8768efb8508a 100644 --- a/drivers/media/video/tw9910.c +++ b/drivers/media/video/tw9910.c @@ -951,21 +951,7 @@ static struct i2c_driver tw9910_i2c_driver = { .id_table = tw9910_id, }; -/* - * module function - */ -static int __init tw9910_module_init(void) -{ - return i2c_add_driver(&tw9910_i2c_driver); -} - -static void __exit tw9910_module_exit(void) -{ - i2c_del_driver(&tw9910_i2c_driver); -} - -module_init(tw9910_module_init); -module_exit(tw9910_module_exit); +module_i2c_driver(tw9910_i2c_driver); MODULE_DESCRIPTION("SoC Camera driver for tw9910"); MODULE_AUTHOR("Kuninori Morimoto"); diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 1aab96a88203..1e7446542091 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -271,15 +271,4 @@ static struct i2c_driver upd64031a_driver = { .id_table = upd64031a_id, }; -static __init int init_upd64031a(void) -{ - return i2c_add_driver(&upd64031a_driver); -} - -static __exit void exit_upd64031a(void) -{ - i2c_del_driver(&upd64031a_driver); -} - -module_init(init_upd64031a); -module_exit(exit_upd64031a); +module_i2c_driver(upd64031a_driver); diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 65d065aa6091..75d6acc62018 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -243,15 +243,4 @@ static struct i2c_driver upd64083_driver = { .id_table = upd64083_id, }; -static __init int init_upd64083(void) -{ - return i2c_add_driver(&upd64083_driver); -} - -static __exit void exit_upd64083(void) -{ - i2c_del_driver(&upd64083_driver); -} - -module_init(init_upd64083); -module_exit(exit_upd64083); +module_i2c_driver(upd64083_driver); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index a240d43d15d1..1d131720b6d7 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -23,6 +23,7 @@ * codec can't handle MJPEG data. */ +#include <linux/atomic.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> @@ -32,7 +33,6 @@ #include <linux/vmalloc.h> #include <linux/wait.h> #include <linux/version.h> -#include <asm/atomic.h> #include <asm/unaligned.h> #include <media/v4l2-common.h> @@ -2139,6 +2139,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Dell XPS m1530 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05a9, + .idProduct = 0x2640, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_DEF }, /* Apple Built-In iSight */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 518f77d3a4d8..8f54e24e3f35 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -126,7 +126,7 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, int drop_corrupted) { queue->queue.type = type; - queue->queue.io_modes = VB2_MMAP; + queue->queue.io_modes = VB2_MMAP | VB2_USERPTR; queue->queue.drv_priv = queue; queue->queue.buf_struct_size = sizeof(struct uvc_buffer); queue->queue.ops = &uvc_queue_qops; diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index 2ae4f880ea05..ff2cdddf9bc6 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -11,6 +11,7 @@ * */ +#include <linux/compat.h> #include <linux/kernel.h> #include <linux/version.h> #include <linux/list.h> @@ -1012,7 +1013,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) default: uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", cmd); - return -EINVAL; + return -ENOTTY; } return ret; @@ -1030,6 +1031,207 @@ static long uvc_v4l2_ioctl(struct file *file, return video_usercopy(file, cmd, arg, uvc_v4l2_do_ioctl); } +#ifdef CONFIG_COMPAT +struct uvc_xu_control_mapping32 { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + __u32 v4l2_type; + __u32 data_type; + + compat_caddr_t menu_info; + __u32 menu_count; + + __u32 reserved[4]; +}; + +static int uvc_v4l2_get_xu_mapping(struct uvc_xu_control_mapping *kp, + const struct uvc_xu_control_mapping32 __user *up) +{ + struct uvc_menu_info __user *umenus; + struct uvc_menu_info __user *kmenus; + compat_caddr_t p; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + __copy_from_user(kp, up, offsetof(typeof(*up), menu_info)) || + __get_user(kp->menu_count, &up->menu_count)) + return -EFAULT; + + memset(kp->reserved, 0, sizeof(kp->reserved)); + + if (kp->menu_count == 0) { + kp->menu_info = NULL; + return 0; + } + + if (__get_user(p, &up->menu_info)) + return -EFAULT; + umenus = compat_ptr(p); + if (!access_ok(VERIFY_READ, umenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + kmenus = compat_alloc_user_space(kp->menu_count * sizeof(*kmenus)); + if (kmenus == NULL) + return -EFAULT; + kp->menu_info = kmenus; + + if (copy_in_user(kmenus, umenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + return 0; +} + +static int uvc_v4l2_put_xu_mapping(const struct uvc_xu_control_mapping *kp, + struct uvc_xu_control_mapping32 __user *up) +{ + struct uvc_menu_info __user *umenus; + struct uvc_menu_info __user *kmenus = kp->menu_info; + compat_caddr_t p; + + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || + __copy_to_user(up, kp, offsetof(typeof(*up), menu_info)) || + __put_user(kp->menu_count, &up->menu_count)) + return -EFAULT; + + __clear_user(up->reserved, sizeof(up->reserved)); + + if (kp->menu_count == 0) + return 0; + + if (get_user(p, &up->menu_info)) + return -EFAULT; + umenus = compat_ptr(p); + if (!access_ok(VERIFY_WRITE, umenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + if (copy_in_user(umenus, kmenus, kp->menu_count * sizeof(*umenus))) + return -EFAULT; + + return 0; +} + +struct uvc_xu_control_query32 { + __u8 unit; + __u8 selector; + __u8 query; + __u16 size; + compat_caddr_t data; +}; + +static int uvc_v4l2_get_xu_query(struct uvc_xu_control_query *kp, + const struct uvc_xu_control_query32 __user *up) +{ + u8 __user *udata; + u8 __user *kdata; + compat_caddr_t p; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + __copy_from_user(kp, up, offsetof(typeof(*up), data))) + return -EFAULT; + + if (kp->size == 0) { + kp->data = NULL; + return 0; + } + + if (__get_user(p, &up->data)) + return -EFAULT; + udata = compat_ptr(p); + if (!access_ok(VERIFY_READ, udata, kp->size)) + return -EFAULT; + + kdata = compat_alloc_user_space(kp->size); + if (kdata == NULL) + return -EFAULT; + kp->data = kdata; + + if (copy_in_user(kdata, udata, kp->size)) + return -EFAULT; + + return 0; +} + +static int uvc_v4l2_put_xu_query(const struct uvc_xu_control_query *kp, + struct uvc_xu_control_query32 __user *up) +{ + u8 __user *udata; + u8 __user *kdata = kp->data; + compat_caddr_t p; + + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || + __copy_to_user(up, kp, offsetof(typeof(*up), data))) + return -EFAULT; + + if (kp->size == 0) + return 0; + + if (get_user(p, &up->data)) + return -EFAULT; + udata = compat_ptr(p); + if (!access_ok(VERIFY_READ, udata, kp->size)) + return -EFAULT; + + if (copy_in_user(udata, kdata, kp->size)) + return -EFAULT; + + return 0; +} + +#define UVCIOC_CTRL_MAP32 _IOWR('u', 0x20, struct uvc_xu_control_mapping32) +#define UVCIOC_CTRL_QUERY32 _IOWR('u', 0x21, struct uvc_xu_control_query32) + +static long uvc_v4l2_compat_ioctl32(struct file *file, + unsigned int cmd, unsigned long arg) +{ + union { + struct uvc_xu_control_mapping xmap; + struct uvc_xu_control_query xqry; + } karg; + void __user *up = compat_ptr(arg); + mm_segment_t old_fs; + long ret; + + switch (cmd) { + case UVCIOC_CTRL_MAP32: + cmd = UVCIOC_CTRL_MAP; + ret = uvc_v4l2_get_xu_mapping(&karg.xmap, up); + break; + + case UVCIOC_CTRL_QUERY32: + cmd = UVCIOC_CTRL_QUERY; + ret = uvc_v4l2_get_xu_query(&karg.xqry, up); + break; + + default: + return -ENOIOCTLCMD; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = uvc_v4l2_ioctl(file, cmd, (unsigned long)&karg); + set_fs(old_fs); + + if (ret < 0) + return ret; + + switch (cmd) { + case UVCIOC_CTRL_MAP: + ret = uvc_v4l2_put_xu_mapping(&karg.xmap, up); + break; + + case UVCIOC_CTRL_QUERY: + ret = uvc_v4l2_put_xu_query(&karg.xqry, up); + break; + } + + return ret; +} +#endif + static ssize_t uvc_v4l2_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { @@ -1076,6 +1278,9 @@ const struct v4l2_file_operations uvc_fops = { .open = uvc_v4l2_open, .release = uvc_v4l2_release, .unlocked_ioctl = uvc_v4l2_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl32 = uvc_v4l2_compat_ioctl32, +#endif .read = uvc_v4l2_read, .mmap = uvc_v4l2_mmap, .poll = uvc_v4l2_poll, diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index af4419e6c658..2829d256e4b7 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -14,12 +14,11 @@ */ #include <linux/compat.h> -#include <linux/videodev2.h> #include <linux/module.h> +#include <linux/videodev2.h> +#include <media/v4l2-dev.h> #include <media/v4l2-ioctl.h> -#ifdef CONFIG_COMPAT - static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long ret = -ENOIOCTLCMD; @@ -937,6 +936,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) { + struct video_device *vdev = video_devdata(file); long ret = -ENOIOCTLCMD; if (!file->f_op->unlocked_ioctl) @@ -1005,6 +1005,8 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_G_ENC_INDEX: case VIDIOC_ENCODER_CMD: case VIDIOC_TRY_ENCODER_CMD: + case VIDIOC_DECODER_CMD: + case VIDIOC_TRY_DECODER_CMD: case VIDIOC_DBG_S_REGISTER: case VIDIOC_DBG_G_REGISTER: case VIDIOC_DBG_G_CHIP_IDENT: @@ -1025,14 +1027,16 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) break; default: - printk(KERN_WARNING "compat_ioctl32: " - "unknown ioctl '%c', dir=%d, #%d (0x%08x)\n", - _IOC_TYPE(cmd), _IOC_DIR(cmd), _IOC_NR(cmd), cmd); + if (vdev->fops->compat_ioctl32) + ret = vdev->fops->compat_ioctl32(file, cmd, arg); + + if (ret == -ENOIOCTLCMD) + printk(KERN_WARNING "compat_ioctl32: " + "unknown ioctl '%c', dir=%d, #%d (0x%08x)\n", + _IOC_TYPE(cmd), _IOC_DIR(cmd), _IOC_NR(cmd), + cmd); break; } return ret; } EXPORT_SYMBOL_GPL(v4l2_compat_ioctl32); -#endif - -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index cccd42be718a..18015c0a8d31 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -175,6 +175,15 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "16-bit CRC", NULL }; + static const char * const mpeg_audio_dec_playback[] = { + "Auto", + "Stereo", + "Left", + "Right", + "Mono", + "Swapped Stereo", + NULL + }; static const char * const mpeg_video_encoding[] = { "MPEG-1", "MPEG-2", @@ -236,8 +245,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) }; static const char * const tune_preemphasis[] = { "No Preemphasis", - "50 useconds", - "75 useconds", + "50 Microseconds", + "75 Microseconds", NULL, }; static const char * const header_mode[] = { @@ -334,7 +343,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id) }; static const char * const mpeg4_profile[] = { "Simple", - "Adcanved Simple", + "Advanced Simple", "Core", "Simple Scalable", "Advanced Coding Efficency", @@ -353,6 +362,16 @@ const char * const *v4l2_ctrl_get_menu(u32 id) NULL, }; + static const char * const jpeg_chroma_subsampling[] = { + "4:4:4", + "4:2:2", + "4:2:0", + "4:1:1", + "4:1:0", + "Gray", + NULL, + }; + switch (id) { case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return mpeg_audio_sampling_freq; @@ -374,6 +393,9 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return mpeg_audio_emphasis; case V4L2_CID_MPEG_AUDIO_CRC: return mpeg_audio_crc; + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + case V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK: + return mpeg_audio_dec_playback; case V4L2_CID_MPEG_VIDEO_ENCODING: return mpeg_video_encoding; case V4L2_CID_MPEG_VIDEO_ASPECT: @@ -414,6 +436,9 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return mpeg_mpeg4_level; case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: return mpeg4_profile; + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: + return jpeg_chroma_subsampling; + default: return NULL; } @@ -492,6 +517,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute"; case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate"; case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate"; + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: return "Audio Playback"; + case V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK: return "Audio Multilingual Playback"; case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding"; case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect"; case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames"; @@ -546,6 +573,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB: return "Number of MBs in a Slice"; case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: return "Slice Partitioning Method"; case V4L2_CID_MPEG_VIDEO_VBV_SIZE: return "VBV Buffer Size"; + case V4L2_CID_MPEG_VIDEO_DEC_PTS: return "Video Decoder PTS"; + case V4L2_CID_MPEG_VIDEO_DEC_FRAME: return "Video Decoder Frame Count"; /* CAMERA controls */ /* Keep the order of the 'case's the same as in videodev2.h! */ @@ -607,6 +636,14 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_FLASH_CHARGE: return "Charge"; case V4L2_CID_FLASH_READY: return "Ready to Strobe"; + /* JPEG encoder controls */ + /* Keep the order of the 'case's the same as in videodev2.h! */ + case V4L2_CID_JPEG_CLASS: return "JPEG Compression Controls"; + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: return "Chroma Subsampling"; + case V4L2_CID_JPEG_RESTART_INTERVAL: return "Restart Interval"; + case V4L2_CID_JPEG_COMPRESSION_QUALITY: return "Compression Quality"; + case V4L2_CID_JPEG_ACTIVE_MARKER: return "Active Markers"; + default: return NULL; } @@ -674,6 +711,8 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: case V4L2_CID_MPEG_AUDIO_EMPHASIS: case V4L2_CID_MPEG_AUDIO_CRC: + case V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK: + case V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK: case V4L2_CID_MPEG_VIDEO_ENCODING: case V4L2_CID_MPEG_VIDEO_ASPECT: case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: @@ -693,6 +732,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC: case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL: case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING: *type = V4L2_CTRL_TYPE_MENU; break; case V4L2_CID_RDS_TX_PS_NAME: @@ -704,6 +744,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_MPEG_CLASS: case V4L2_CID_FM_TX_CLASS: case V4L2_CID_FLASH_CLASS: + case V4L2_CID_JPEG_CLASS: *type = V4L2_CTRL_TYPE_CTRL_CLASS; /* You can neither read not write these */ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY; @@ -717,6 +758,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, *max = 0xFFFFFF; break; case V4L2_CID_FLASH_FAULT: + case V4L2_CID_JPEG_ACTIVE_MARKER: *type = V4L2_CTRL_TYPE_BITMASK; break; case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: @@ -724,6 +766,11 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, *type = V4L2_CTRL_TYPE_INTEGER; *flags |= V4L2_CTRL_FLAG_READ_ONLY; break; + case V4L2_CID_MPEG_VIDEO_DEC_FRAME: + case V4L2_CID_MPEG_VIDEO_DEC_PTS: + *type = V4L2_CTRL_TYPE_INTEGER64; + *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_VOLATILE; + break; default: *type = V4L2_CTRL_TYPE_INTEGER; break; @@ -1470,7 +1517,7 @@ EXPORT_SYMBOL(v4l2_ctrl_add_ctrl); int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, struct v4l2_ctrl_handler *add) { - struct v4l2_ctrl *ctrl; + struct v4l2_ctrl_ref *ref; int ret = 0; /* Do nothing if either handler is NULL or if they are the same */ @@ -1479,7 +1526,9 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, if (hdl->error) return hdl->error; mutex_lock(&add->lock); - list_for_each_entry(ctrl, &add->ctrls, node) { + list_for_each_entry(ref, &add->ctrl_refs, node) { + struct v4l2_ctrl *ctrl = ref->ctrl; + /* Skip handler-private controls. */ if (ctrl->is_private) continue; @@ -2359,3 +2408,35 @@ void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl, v4l2_ctrl_unlock(ctrl); } EXPORT_SYMBOL(v4l2_ctrl_del_event); + +int v4l2_ctrl_log_status(struct file *file, void *fh) +{ + struct video_device *vfd = video_devdata(file); + struct v4l2_fh *vfh = file->private_data; + + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags) && vfd->v4l2_dev) + v4l2_ctrl_handler_log_status(vfh->ctrl_handler, + vfd->v4l2_dev->name); + return 0; +} +EXPORT_SYMBOL(v4l2_ctrl_log_status); + +int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type == V4L2_EVENT_CTRL) + return v4l2_event_subscribe(fh, sub, 0); + return -EINVAL; +} +EXPORT_SYMBOL(v4l2_ctrl_subscribe_event); + +unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait) +{ + struct v4l2_fh *fh = file->private_data; + + if (v4l2_event_pending(fh)) + return POLLPRI; + poll_wait(file, &fh->wait, wait); + return 0; +} +EXPORT_SYMBOL(v4l2_ctrl_poll); diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 96e9615663e9..041804b73ebd 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -788,7 +788,7 @@ static void __exit videodev_exit(void) unregister_chrdev_region(dev, VIDEO_NUM_DEVICES); } -module_init(videodev_init) +subsys_initcall(videodev_init); module_exit(videodev_exit) MODULE_AUTHOR("Alan Cox, Mauro Carvalho Chehab <mchehab@infradead.org>"); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 3f623859a337..5b2ec1fd2d0a 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -260,6 +260,8 @@ static const char *v4l2_ioctls[] = { [_IOC_NR(VIDIOC_ENCODER_CMD)] = "VIDIOC_ENCODER_CMD", [_IOC_NR(VIDIOC_TRY_ENCODER_CMD)] = "VIDIOC_TRY_ENCODER_CMD", + [_IOC_NR(VIDIOC_DECODER_CMD)] = "VIDIOC_DECODER_CMD", + [_IOC_NR(VIDIOC_TRY_DECODER_CMD)] = "VIDIOC_TRY_DECODER_CMD", [_IOC_NR(VIDIOC_DBG_S_REGISTER)] = "VIDIOC_DBG_S_REGISTER", [_IOC_NR(VIDIOC_DBG_G_REGISTER)] = "VIDIOC_DBG_G_REGISTER", @@ -540,10 +542,12 @@ static long __video_do_ioctl(struct file *file, if (!ret) dbgarg(cmd, "driver=%s, card=%s, bus=%s, " "version=0x%08x, " - "capabilities=0x%08x\n", + "capabilities=0x%08x, " + "device_caps=0x%08x\n", cap->driver, cap->card, cap->bus_info, cap->version, - cap->capabilities); + cap->capabilities, + cap->device_caps); break; } @@ -1762,6 +1766,32 @@ static long __video_do_ioctl(struct file *file, dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags); break; } + case VIDIOC_DECODER_CMD: + { + struct v4l2_decoder_cmd *p = arg; + + if (!ops->vidioc_decoder_cmd) + break; + if (ret_prio) { + ret = ret_prio; + break; + } + ret = ops->vidioc_decoder_cmd(file, fh, p); + if (!ret) + dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags); + break; + } + case VIDIOC_TRY_DECODER_CMD: + { + struct v4l2_decoder_cmd *p = arg; + + if (!ops->vidioc_try_decoder_cmd) + break; + ret = ops->vidioc_try_decoder_cmd(file, fh, p); + if (!ret) + dbgarg(cmd, "cmd=%d, flags=%x\n", p->cmd, p->flags); + break; + } case VIDIOC_G_PARM: { struct v4l2_streamparm *p = arg; @@ -1909,7 +1939,13 @@ static long __video_do_ioctl(struct file *file, { if (!ops->vidioc_log_status) break; + if (vfd->v4l2_dev) + pr_info("%s: ================= START STATUS =================\n", + vfd->v4l2_dev->name); ret = ops->vidioc_log_status(file, fh); + if (vfd->v4l2_dev) + pr_info("%s: ================== END STATUS ==================\n", + vfd->v4l2_dev->name); break; } #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -2419,7 +2455,7 @@ video_usercopy(struct file *file, unsigned int cmd, unsigned long arg, /* Handles IOCTL */ err = func(file, cmd, parg); if (err == -ENOIOCTLCMD) - err = -EINVAL; + err = -ENOTTY; if (has_array_args) { *kernel_ptr = user_ptr; diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index 41d118ee2de6..6fe88e965a8c 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -194,8 +194,16 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) } #endif - case VIDIOC_LOG_STATUS: - return v4l2_subdev_call(sd, core, log_status); + case VIDIOC_LOG_STATUS: { + int ret; + + pr_info("%s: ================= START STATUS =================\n", + sd->name); + ret = v4l2_subdev_call(sd, core, log_status); + pr_info("%s: ================== END STATUS ==================\n", + sd->name); + return ret; + } #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) case VIDIOC_SUBDEV_G_FMT: { diff --git a/drivers/media/video/videobuf2-vmalloc.c b/drivers/media/video/videobuf2-vmalloc.c index 4e789a178f8a..6b5ca6c70a46 100644 --- a/drivers/media/video/videobuf2-vmalloc.c +++ b/drivers/media/video/videobuf2-vmalloc.c @@ -10,6 +10,7 @@ * the Free Software Foundation. */ +#include <linux/io.h> #include <linux/module.h> #include <linux/mm.h> #include <linux/sched.h> @@ -22,6 +23,7 @@ struct vb2_vmalloc_buf { void *vaddr; struct page **pages; + struct vm_area_struct *vma; int write; unsigned long size; unsigned int n_pages; @@ -71,6 +73,8 @@ static void *vb2_vmalloc_get_userptr(void *alloc_ctx, unsigned long vaddr, struct vb2_vmalloc_buf *buf; unsigned long first, last; int n_pages, offset; + struct vm_area_struct *vma; + dma_addr_t physp; buf = kzalloc(sizeof(*buf), GFP_KERNEL); if (!buf) @@ -80,23 +84,37 @@ static void *vb2_vmalloc_get_userptr(void *alloc_ctx, unsigned long vaddr, offset = vaddr & ~PAGE_MASK; buf->size = size; - first = vaddr >> PAGE_SHIFT; - last = (vaddr + size - 1) >> PAGE_SHIFT; - buf->n_pages = last - first + 1; - buf->pages = kzalloc(buf->n_pages * sizeof(struct page *), GFP_KERNEL); - if (!buf->pages) - goto fail_pages_array_alloc; - /* current->mm->mmap_sem is taken by videobuf2 core */ - n_pages = get_user_pages(current, current->mm, vaddr & PAGE_MASK, - buf->n_pages, write, 1, /* force */ - buf->pages, NULL); - if (n_pages != buf->n_pages) - goto fail_get_user_pages; - - buf->vaddr = vm_map_ram(buf->pages, buf->n_pages, -1, PAGE_KERNEL); - if (!buf->vaddr) - goto fail_get_user_pages; + vma = find_vma(current->mm, vaddr); + if (vma && (vma->vm_flags & VM_PFNMAP) && (vma->vm_pgoff)) { + if (vb2_get_contig_userptr(vaddr, size, &vma, &physp)) + goto fail_pages_array_alloc; + buf->vma = vma; + buf->vaddr = ioremap_nocache(physp, size); + if (!buf->vaddr) + goto fail_pages_array_alloc; + } else { + first = vaddr >> PAGE_SHIFT; + last = (vaddr + size - 1) >> PAGE_SHIFT; + buf->n_pages = last - first + 1; + buf->pages = kzalloc(buf->n_pages * sizeof(struct page *), + GFP_KERNEL); + if (!buf->pages) + goto fail_pages_array_alloc; + + /* current->mm->mmap_sem is taken by videobuf2 core */ + n_pages = get_user_pages(current, current->mm, + vaddr & PAGE_MASK, buf->n_pages, + write, 1, /* force */ + buf->pages, NULL); + if (n_pages != buf->n_pages) + goto fail_get_user_pages; + + buf->vaddr = vm_map_ram(buf->pages, buf->n_pages, -1, + PAGE_KERNEL); + if (!buf->vaddr) + goto fail_get_user_pages; + } buf->vaddr += offset; return buf; @@ -120,14 +138,20 @@ static void vb2_vmalloc_put_userptr(void *buf_priv) unsigned long vaddr = (unsigned long)buf->vaddr & PAGE_MASK; unsigned int i; - if (vaddr) - vm_unmap_ram((void *)vaddr, buf->n_pages); - for (i = 0; i < buf->n_pages; ++i) { - if (buf->write) - set_page_dirty_lock(buf->pages[i]); - put_page(buf->pages[i]); + if (buf->pages) { + if (vaddr) + vm_unmap_ram((void *)vaddr, buf->n_pages); + for (i = 0; i < buf->n_pages; ++i) { + if (buf->write) + set_page_dirty_lock(buf->pages[i]); + put_page(buf->pages[i]); + } + kfree(buf->pages); + } else { + if (buf->vma) + vb2_put_vma(buf->vma); + iounmap(buf->vaddr); } - kfree(buf->pages); kfree(buf); } diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 7d754fbcccbf..5e8b0710105b 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -819,8 +819,9 @@ static int vidioc_querycap(struct file *file, void *priv, strcpy(cap->driver, "vivi"); strcpy(cap->card, "vivi"); strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | \ + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } @@ -958,14 +959,6 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) return vb2_streamoff(&dev->vb_vidq, i); } -static int vidioc_log_status(struct file *file, void *priv) -{ - struct vivi_dev *dev = video_drvdata(file); - - v4l2_ctrl_handler_log_status(&dev->ctrl_handler, dev->v4l2_dev.name); - return 0; -} - static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) { return 0; @@ -1008,17 +1001,6 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) return 0; } -static int vidioc_subscribe_event(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) -{ - switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_event_subscribe(fh, sub, 0); - default: - return -EINVAL; - } -} - /* --- controls ---------------------------------------------- */ static int vivi_g_volatile_ctrl(struct v4l2_ctrl *ctrl) @@ -1209,8 +1191,8 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = { .vidioc_s_input = vidioc_s_input, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, - .vidioc_log_status = vidioc_log_status, - .vidioc_subscribe_event = vidioc_subscribe_event, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c index c15efb6e7771..7cfbc9d94a48 100644 --- a/drivers/media/video/vp27smpx.c +++ b/drivers/media/video/vp27smpx.c @@ -208,15 +208,4 @@ static struct i2c_driver vp27smpx_driver = { .id_table = vp27smpx_id, }; -static __init int init_vp27smpx(void) -{ - return i2c_add_driver(&vp27smpx_driver); -} - -static __exit void exit_vp27smpx(void) -{ - i2c_del_driver(&vp27smpx_driver); -} - -module_init(init_vp27smpx); -module_exit(exit_vp27smpx); +module_i2c_driver(vp27smpx_driver); diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index e5cad6ff64a1..2f67b4c5c823 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -588,15 +588,4 @@ static struct i2c_driver vpx3220_driver = { .id_table = vpx3220_id, }; -static __init int init_vpx3220(void) -{ - return i2c_add_driver(&vpx3220_driver); -} - -static __exit void exit_vpx3220(void) -{ - i2c_del_driver(&vpx3220_driver); -} - -module_init(init_vpx3220); -module_exit(exit_vpx3220); +module_i2c_driver(vpx3220_driver); diff --git a/drivers/media/video/vs6624.c b/drivers/media/video/vs6624.c new file mode 100644 index 000000000000..42ae9dc9c574 --- /dev/null +++ b/drivers/media/video/vs6624.c @@ -0,0 +1,928 @@ +/* + * vs6624.c ST VS6624 CMOS image sensor driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> + +#include "vs6624_regs.h" + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 +#define QQCIF_WIDTH 88 +#define QQCIF_HEIGHT 72 + +#define MAX_FRAME_RATE 30 + +struct vs6624 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_fract frame_rate; + struct v4l2_mbus_framefmt fmt; + unsigned ce_pin; +}; + +static const struct vs6624_format { + enum v4l2_mbus_pixelcode mbus_code; + enum v4l2_colorspace colorspace; +} vs6624_formats[] = { + { + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + }, +}; + +static struct v4l2_mbus_framefmt vs6624_default_fmt = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, +}; + +static const u16 vs6624_p1[] = { + 0x8104, 0x03, + 0x8105, 0x01, + 0xc900, 0x03, + 0xc904, 0x47, + 0xc905, 0x10, + 0xc906, 0x80, + 0xc907, 0x3a, + 0x903a, 0x02, + 0x903b, 0x47, + 0x903c, 0x15, + 0xc908, 0x31, + 0xc909, 0xdc, + 0xc90a, 0x80, + 0xc90b, 0x44, + 0x9044, 0x02, + 0x9045, 0x31, + 0x9046, 0xe2, + 0xc90c, 0x07, + 0xc90d, 0xe0, + 0xc90e, 0x80, + 0xc90f, 0x47, + 0x9047, 0x90, + 0x9048, 0x83, + 0x9049, 0x81, + 0x904a, 0xe0, + 0x904b, 0x60, + 0x904c, 0x08, + 0x904d, 0x90, + 0x904e, 0xc0, + 0x904f, 0x43, + 0x9050, 0x74, + 0x9051, 0x01, + 0x9052, 0xf0, + 0x9053, 0x80, + 0x9054, 0x05, + 0x9055, 0xE4, + 0x9056, 0x90, + 0x9057, 0xc0, + 0x9058, 0x43, + 0x9059, 0xf0, + 0x905a, 0x02, + 0x905b, 0x07, + 0x905c, 0xec, + 0xc910, 0x5d, + 0xc911, 0xca, + 0xc912, 0x80, + 0xc913, 0x5d, + 0x905d, 0xa3, + 0x905e, 0x04, + 0x905f, 0xf0, + 0x9060, 0xa3, + 0x9061, 0x04, + 0x9062, 0xf0, + 0x9063, 0x22, + 0xc914, 0x72, + 0xc915, 0x92, + 0xc916, 0x80, + 0xc917, 0x64, + 0x9064, 0x74, + 0x9065, 0x01, + 0x9066, 0x02, + 0x9067, 0x72, + 0x9068, 0x95, + 0xc918, 0x47, + 0xc919, 0xf2, + 0xc91a, 0x81, + 0xc91b, 0x69, + 0x9169, 0x74, + 0x916a, 0x02, + 0x916b, 0xf0, + 0x916c, 0xec, + 0x916d, 0xb4, + 0x916e, 0x10, + 0x916f, 0x0a, + 0x9170, 0x90, + 0x9171, 0x80, + 0x9172, 0x16, + 0x9173, 0xe0, + 0x9174, 0x70, + 0x9175, 0x04, + 0x9176, 0x90, + 0x9177, 0xd3, + 0x9178, 0xc4, + 0x9179, 0xf0, + 0x917a, 0x22, + 0xc91c, 0x0a, + 0xc91d, 0xbe, + 0xc91e, 0x80, + 0xc91f, 0x73, + 0x9073, 0xfc, + 0x9074, 0xa3, + 0x9075, 0xe0, + 0x9076, 0xf5, + 0x9077, 0x82, + 0x9078, 0x8c, + 0x9079, 0x83, + 0x907a, 0xa3, + 0x907b, 0xa3, + 0x907c, 0xe0, + 0x907d, 0xfc, + 0x907e, 0xa3, + 0x907f, 0xe0, + 0x9080, 0xc3, + 0x9081, 0x9f, + 0x9082, 0xff, + 0x9083, 0xec, + 0x9084, 0x9e, + 0x9085, 0xfe, + 0x9086, 0x02, + 0x9087, 0x0a, + 0x9088, 0xea, + 0xc920, 0x47, + 0xc921, 0x38, + 0xc922, 0x80, + 0xc923, 0x89, + 0x9089, 0xec, + 0x908a, 0xd3, + 0x908b, 0x94, + 0x908c, 0x20, + 0x908d, 0x40, + 0x908e, 0x01, + 0x908f, 0x1c, + 0x9090, 0x90, + 0x9091, 0xd3, + 0x9092, 0xd4, + 0x9093, 0xec, + 0x9094, 0xf0, + 0x9095, 0x02, + 0x9096, 0x47, + 0x9097, 0x3d, + 0xc924, 0x45, + 0xc925, 0xca, + 0xc926, 0x80, + 0xc927, 0x98, + 0x9098, 0x12, + 0x9099, 0x77, + 0x909a, 0xd6, + 0x909b, 0x02, + 0x909c, 0x45, + 0x909d, 0xcd, + 0xc928, 0x20, + 0xc929, 0xd5, + 0xc92a, 0x80, + 0xc92b, 0x9e, + 0x909e, 0x90, + 0x909f, 0x82, + 0x90a0, 0x18, + 0x90a1, 0xe0, + 0x90a2, 0xb4, + 0x90a3, 0x03, + 0x90a4, 0x0e, + 0x90a5, 0x90, + 0x90a6, 0x83, + 0x90a7, 0xbf, + 0x90a8, 0xe0, + 0x90a9, 0x60, + 0x90aa, 0x08, + 0x90ab, 0x90, + 0x90ac, 0x81, + 0x90ad, 0xfc, + 0x90ae, 0xe0, + 0x90af, 0xff, + 0x90b0, 0xc3, + 0x90b1, 0x13, + 0x90b2, 0xf0, + 0x90b3, 0x90, + 0x90b4, 0x81, + 0x90b5, 0xfc, + 0x90b6, 0xe0, + 0x90b7, 0xff, + 0x90b8, 0x02, + 0x90b9, 0x20, + 0x90ba, 0xda, + 0xc92c, 0x70, + 0xc92d, 0xbc, + 0xc92e, 0x80, + 0xc92f, 0xbb, + 0x90bb, 0x90, + 0x90bc, 0x82, + 0x90bd, 0x18, + 0x90be, 0xe0, + 0x90bf, 0xb4, + 0x90c0, 0x03, + 0x90c1, 0x06, + 0x90c2, 0x90, + 0x90c3, 0xc1, + 0x90c4, 0x06, + 0x90c5, 0x74, + 0x90c6, 0x05, + 0x90c7, 0xf0, + 0x90c8, 0x90, + 0x90c9, 0xd3, + 0x90ca, 0xa0, + 0x90cb, 0x02, + 0x90cc, 0x70, + 0x90cd, 0xbf, + 0xc930, 0x72, + 0xc931, 0x21, + 0xc932, 0x81, + 0xc933, 0x3b, + 0x913b, 0x7d, + 0x913c, 0x02, + 0x913d, 0x7f, + 0x913e, 0x7b, + 0x913f, 0x02, + 0x9140, 0x72, + 0x9141, 0x25, + 0xc934, 0x28, + 0xc935, 0xae, + 0xc936, 0x80, + 0xc937, 0xd2, + 0x90d2, 0xf0, + 0x90d3, 0x90, + 0x90d4, 0xd2, + 0x90d5, 0x0a, + 0x90d6, 0x02, + 0x90d7, 0x28, + 0x90d8, 0xb4, + 0xc938, 0x28, + 0xc939, 0xb1, + 0xc93a, 0x80, + 0xc93b, 0xd9, + 0x90d9, 0x90, + 0x90da, 0x83, + 0x90db, 0xba, + 0x90dc, 0xe0, + 0x90dd, 0xff, + 0x90de, 0x90, + 0x90df, 0xd2, + 0x90e0, 0x08, + 0x90e1, 0xe0, + 0x90e2, 0xe4, + 0x90e3, 0xef, + 0x90e4, 0xf0, + 0x90e5, 0xa3, + 0x90e6, 0xe0, + 0x90e7, 0x74, + 0x90e8, 0xff, + 0x90e9, 0xf0, + 0x90ea, 0x90, + 0x90eb, 0xd2, + 0x90ec, 0x0a, + 0x90ed, 0x02, + 0x90ee, 0x28, + 0x90ef, 0xb4, + 0xc93c, 0x29, + 0xc93d, 0x79, + 0xc93e, 0x80, + 0xc93f, 0xf0, + 0x90f0, 0xf0, + 0x90f1, 0x90, + 0x90f2, 0xd2, + 0x90f3, 0x0e, + 0x90f4, 0x02, + 0x90f5, 0x29, + 0x90f6, 0x7f, + 0xc940, 0x29, + 0xc941, 0x7c, + 0xc942, 0x80, + 0xc943, 0xf7, + 0x90f7, 0x90, + 0x90f8, 0x83, + 0x90f9, 0xba, + 0x90fa, 0xe0, + 0x90fb, 0xff, + 0x90fc, 0x90, + 0x90fd, 0xd2, + 0x90fe, 0x0c, + 0x90ff, 0xe0, + 0x9100, 0xe4, + 0x9101, 0xef, + 0x9102, 0xf0, + 0x9103, 0xa3, + 0x9104, 0xe0, + 0x9105, 0x74, + 0x9106, 0xff, + 0x9107, 0xf0, + 0x9108, 0x90, + 0x9109, 0xd2, + 0x910a, 0x0e, + 0x910b, 0x02, + 0x910c, 0x29, + 0x910d, 0x7f, + 0xc944, 0x2a, + 0xc945, 0x42, + 0xc946, 0x81, + 0xc947, 0x0e, + 0x910e, 0xf0, + 0x910f, 0x90, + 0x9110, 0xd2, + 0x9111, 0x12, + 0x9112, 0x02, + 0x9113, 0x2a, + 0x9114, 0x48, + 0xc948, 0x2a, + 0xc949, 0x45, + 0xc94a, 0x81, + 0xc94b, 0x15, + 0x9115, 0x90, + 0x9116, 0x83, + 0x9117, 0xba, + 0x9118, 0xe0, + 0x9119, 0xff, + 0x911a, 0x90, + 0x911b, 0xd2, + 0x911c, 0x10, + 0x911d, 0xe0, + 0x911e, 0xe4, + 0x911f, 0xef, + 0x9120, 0xf0, + 0x9121, 0xa3, + 0x9122, 0xe0, + 0x9123, 0x74, + 0x9124, 0xff, + 0x9125, 0xf0, + 0x9126, 0x90, + 0x9127, 0xd2, + 0x9128, 0x12, + 0x9129, 0x02, + 0x912a, 0x2a, + 0x912b, 0x48, + 0xc900, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_p2[] = { + 0x806f, 0x01, + 0x058c, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_run_setup[] = { + 0x1d18, 0x00, /* Enableconstrainedwhitebalance */ + VS6624_PEAK_MIN_OUT_G_MSB, 0x3c, /* Damper PeakGain Output MSB */ + VS6624_PEAK_MIN_OUT_G_LSB, 0x66, /* Damper PeakGain Output LSB */ + VS6624_CM_LOW_THR_MSB, 0x65, /* Damper Low MSB */ + VS6624_CM_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_CM_HIGH_THR_MSB, 0x66, /* Damper High MSB */ + VS6624_CM_HIGH_THR_LSB, 0x62, /* Damper High LSB */ + VS6624_CM_MIN_OUT_MSB, 0x00, /* Damper Min output MSB */ + VS6624_CM_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_NORA_DISABLE, 0x00, /* Nora fDisable */ + VS6624_NORA_USAGE, 0x04, /* Nora usage */ + VS6624_NORA_LOW_THR_MSB, 0x63, /* Damper Low MSB Changed 0x63 to 0x65 */ + VS6624_NORA_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_NORA_HIGH_THR_MSB, 0x68, /* Damper High MSB */ + VS6624_NORA_HIGH_THR_LSB, 0xdd, /* Damper High LSB */ + VS6624_NORA_MIN_OUT_MSB, 0x3a, /* Damper Min output MSB */ + VS6624_NORA_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_F2B_DISABLE, 0x00, /* Disable */ + 0x1d8a, 0x30, /* MAXWeightHigh */ + 0x1d91, 0x62, /* fpDamperLowThresholdHigh MSB */ + 0x1d92, 0x4a, /* fpDamperLowThresholdHigh LSB */ + 0x1d95, 0x65, /* fpDamperHighThresholdHigh MSB */ + 0x1d96, 0x0e, /* fpDamperHighThresholdHigh LSB */ + 0x1da1, 0x3a, /* fpMinimumDamperOutputLow MSB */ + 0x1da2, 0xb8, /* fpMinimumDamperOutputLow LSB */ + 0x1e08, 0x06, /* MAXWeightLow */ + 0x1e0a, 0x0a, /* MAXWeightHigh */ + 0x1601, 0x3a, /* Red A MSB */ + 0x1602, 0x14, /* Red A LSB */ + 0x1605, 0x3b, /* Blue A MSB */ + 0x1606, 0x85, /* BLue A LSB */ + 0x1609, 0x3b, /* RED B MSB */ + 0x160a, 0x85, /* RED B LSB */ + 0x160d, 0x3a, /* Blue B MSB */ + 0x160e, 0x14, /* Blue B LSB */ + 0x1611, 0x30, /* Max Distance from Locus MSB */ + 0x1612, 0x8f, /* Max Distance from Locus MSB */ + 0x1614, 0x01, /* Enable constrainer */ + 0x0000, 0x00, +}; + +static const u16 vs6624_default[] = { + VS6624_CONTRAST0, 0x84, + VS6624_SATURATION0, 0x75, + VS6624_GAMMA0, 0x11, + VS6624_CONTRAST1, 0x84, + VS6624_SATURATION1, 0x75, + VS6624_GAMMA1, 0x11, + VS6624_MAN_RG, 0x80, + VS6624_MAN_GG, 0x80, + VS6624_MAN_BG, 0x80, + VS6624_WB_MODE, 0x1, + VS6624_EXPO_COMPENSATION, 0xfe, + VS6624_EXPO_METER, 0x0, + VS6624_LIGHT_FREQ, 0x64, + VS6624_PEAK_GAIN, 0xe, + VS6624_PEAK_LOW_THR, 0x28, + VS6624_HMIRROR0, 0x0, + VS6624_VFLIP0, 0x0, + VS6624_ZOOM_HSTEP0_MSB, 0x0, + VS6624_ZOOM_HSTEP0_LSB, 0x1, + VS6624_ZOOM_VSTEP0_MSB, 0x0, + VS6624_ZOOM_VSTEP0_LSB, 0x1, + VS6624_PAN_HSTEP0_MSB, 0x0, + VS6624_PAN_HSTEP0_LSB, 0xf, + VS6624_PAN_VSTEP0_MSB, 0x0, + VS6624_PAN_VSTEP0_LSB, 0xf, + VS6624_SENSOR_MODE, 0x1, + VS6624_SYNC_CODE_SETUP, 0x21, + VS6624_DISABLE_FR_DAMPER, 0x0, + VS6624_FR_DEN, 0x1, + VS6624_FR_NUM_LSB, 0xf, + VS6624_INIT_PIPE_SETUP, 0x0, + VS6624_IMG_FMT0, 0x0, + VS6624_YUV_SETUP, 0x1, + VS6624_IMAGE_SIZE0, 0x2, + 0x0000, 0x00, +}; + +static inline struct vs6624 *to_vs6624(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vs6624, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vs6624, hdl)->sd; +} + +static int vs6624_read(struct v4l2_subdev *sd, u16 index) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = index >> 8; + buf[1] = index; + i2c_master_send(client, buf, 2); + i2c_master_recv(client, buf, 1); + + return buf[0]; +} + +static int vs6624_write(struct v4l2_subdev *sd, u16 index, + u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[3]; + + buf[0] = index >> 8; + buf[1] = index; + buf[2] = value; + + return i2c_master_send(client, buf, 3); +} + +static int vs6624_writeregs(struct v4l2_subdev *sd, const u16 *regs) +{ + u16 reg; + u8 data; + + while (*regs != 0x00) { + reg = *regs++; + data = *regs++; + + vs6624_write(sd, reg, data); + } + return 0; +} + +static int vs6624_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + vs6624_write(sd, VS6624_CONTRAST0, ctrl->val); + break; + case V4L2_CID_SATURATION: + vs6624_write(sd, VS6624_SATURATION0, ctrl->val); + break; + case V4L2_CID_HFLIP: + vs6624_write(sd, VS6624_HMIRROR0, ctrl->val); + break; + case V4L2_CID_VFLIP: + vs6624_write(sd, VS6624_VFLIP0, ctrl->val); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vs6624_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(vs6624_formats)) + return -EINVAL; + + *code = vs6624_formats[index].mbus_code; + return 0; +} + +static int vs6624_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + int index; + + for (index = 0; index < ARRAY_SIZE(vs6624_formats); index++) + if (vs6624_formats[index].mbus_code == fmt->code) + break; + if (index >= ARRAY_SIZE(vs6624_formats)) { + /* default to first format */ + index = 0; + fmt->code = vs6624_formats[0].mbus_code; + } + + /* sensor mode is VGA */ + if (fmt->width > VGA_WIDTH) + fmt->width = VGA_WIDTH; + if (fmt->height > VGA_HEIGHT) + fmt->height = VGA_HEIGHT; + fmt->width = fmt->width & (~3); + fmt->height = fmt->height & (~3); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = vs6624_formats[index].colorspace; + return 0; +} + +static int vs6624_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + int ret; + + ret = vs6624_try_mbus_fmt(sd, fmt); + if (ret) + return ret; + + /* set image format */ + switch (fmt->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x1); + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x3); + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + vs6624_write(sd, VS6624_IMG_FMT0, 0x4); + vs6624_write(sd, VS6624_RGB_SETUP, 0x0); + break; + default: + return -EINVAL; + } + + /* set image size */ + if ((fmt->width == VGA_WIDTH) && (fmt->height == VGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x2); + else if ((fmt->width == QVGA_WIDTH) && (fmt->height == QVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x4); + else if ((fmt->width == QQVGA_WIDTH) && (fmt->height == QQVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x6); + else if ((fmt->width == CIF_WIDTH) && (fmt->height == CIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x3); + else if ((fmt->width == QCIF_WIDTH) && (fmt->height == QCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x5); + else if ((fmt->width == QQCIF_WIDTH) && (fmt->height == QQCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x7); + else { + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x8); + vs6624_write(sd, VS6624_MAN_HSIZE0_MSB, fmt->width >> 8); + vs6624_write(sd, VS6624_MAN_HSIZE0_LSB, fmt->width & 0xFF); + vs6624_write(sd, VS6624_MAN_VSIZE0_MSB, fmt->height >> 8); + vs6624_write(sd, VS6624_MAN_VSIZE0_LSB, fmt->height & 0xFF); + vs6624_write(sd, VS6624_CROP_CTRL0, 0x1); + } + + sensor->fmt = *fmt; + + return 0; +} + +static int vs6624_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + + *fmt = sensor->fmt; + return 0; +} + +static int vs6624_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(*cp)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = sensor->frame_rate.denominator; + cp->timeperframe.denominator = sensor->frame_rate.numerator; + return 0; +} + +static int vs6624_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + if (tpf->numerator == 0 || tpf->denominator == 0 + || (tpf->denominator > tpf->numerator * MAX_FRAME_RATE)) { + /* reset to max frame rate */ + tpf->numerator = 1; + tpf->denominator = MAX_FRAME_RATE; + } + sensor->frame_rate.numerator = tpf->denominator; + sensor->frame_rate.denominator = tpf->numerator; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + return 0; +} + +static int vs6624_s_stream(struct v4l2_subdev *sd, int enable) +{ + if (enable) + vs6624_write(sd, VS6624_USER_CMD, 0x2); + else + vs6624_write(sd, VS6624_USER_CMD, 0x4); + udelay(100); + return 0; +} + +static int vs6624_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + rev = (vs6624_read(sd, VS6624_FW_VSN_MAJOR) << 8) + | vs6624_read(sd, VS6624_FW_VSN_MINOR); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VS6624, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vs6624_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = vs6624_read(sd, reg->reg & 0xffff); + reg->size = 1; + return 0; +} + +static int vs6624_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + vs6624_write(sd, reg->reg & 0xffff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops vs6624_ctrl_ops = { + .s_ctrl = vs6624_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops vs6624_core_ops = { + .g_chip_ident = vs6624_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = vs6624_g_register, + .s_register = vs6624_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops vs6624_video_ops = { + .enum_mbus_fmt = vs6624_enum_mbus_fmt, + .try_mbus_fmt = vs6624_try_mbus_fmt, + .s_mbus_fmt = vs6624_s_mbus_fmt, + .g_mbus_fmt = vs6624_g_mbus_fmt, + .s_parm = vs6624_s_parm, + .g_parm = vs6624_g_parm, + .s_stream = vs6624_s_stream, +}; + +static const struct v4l2_subdev_ops vs6624_ops = { + .core = &vs6624_core_ops, + .video = &vs6624_video_ops, +}; + +static int __devinit vs6624_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vs6624 *sensor; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + const unsigned *ce; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EIO; + + ce = client->dev.platform_data; + if (ce == NULL) + return -EINVAL; + + ret = gpio_request(*ce, "VS6624 Chip Enable"); + if (ret) { + v4l_err(client, "failed to request GPIO %d\n", *ce); + return ret; + } + gpio_direction_output(*ce, 1); + /* wait 100ms before any further i2c writes are performed */ + mdelay(100); + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) { + gpio_free(*ce); + return -ENOMEM; + } + + sd = &sensor->sd; + v4l2_i2c_subdev_init(sd, client, &vs6624_ops); + + vs6624_writeregs(sd, vs6624_p1); + vs6624_write(sd, VS6624_MICRO_EN, 0x2); + vs6624_write(sd, VS6624_DIO_EN, 0x1); + mdelay(10); + vs6624_writeregs(sd, vs6624_p2); + + vs6624_writeregs(sd, vs6624_default); + vs6624_write(sd, VS6624_HSYNC_SETUP, 0xF); + vs6624_writeregs(sd, vs6624_run_setup); + + /* set frame rate */ + sensor->frame_rate.numerator = MAX_FRAME_RATE; + sensor->frame_rate.denominator = 1; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + + sensor->fmt = vs6624_default_fmt; + sensor->ce_pin = *ce; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + hdl = &sensor->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x87); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFF, 1, 0x78); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + return err; + } + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + } + return ret; +} + +static int __devexit vs6624_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vs6624 *sensor = to_vs6624(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(sensor->ce_pin); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id vs6624_id[] = { + {"vs6624", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, vs6624_id); + +static struct i2c_driver vs6624_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vs6624", + }, + .probe = vs6624_probe, + .remove = __devexit_p(vs6624_remove), + .id_table = vs6624_id, +}; + +static __init int vs6624_init(void) +{ + return i2c_add_driver(&vs6624_driver); +} + +static __exit void vs6624_exit(void) +{ + i2c_del_driver(&vs6624_driver); +} + +module_init(vs6624_init); +module_exit(vs6624_exit); + +MODULE_DESCRIPTION("VS6624 sensor driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/vs6624_regs.h b/drivers/media/video/vs6624_regs.h new file mode 100644 index 000000000000..6ba2ee25827e --- /dev/null +++ b/drivers/media/video/vs6624_regs.h @@ -0,0 +1,337 @@ +/* + * vs6624 - ST VS6624 CMOS image sensor registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _VS6624_REGS_H_ +#define _VS6624_REGS_H_ + +/* low level control registers */ +#define VS6624_MICRO_EN 0xC003 /* power enable for all MCU clock */ +#define VS6624_DIO_EN 0xC044 /* enable digital I/O */ +/* device parameters */ +#define VS6624_DEV_ID_MSB 0x0001 /* device id MSB */ +#define VS6624_DEV_ID_LSB 0x0002 /* device id LSB */ +#define VS6624_FW_VSN_MAJOR 0x0004 /* firmware version major */ +#define VS6624_FW_VSN_MINOR 0x0006 /* firmware version minor */ +#define VS6624_PATCH_VSN_MAJOR 0x0008 /* patch version major */ +#define VS6624_PATCH_VSN_MINOR 0x000A /* patch version minor */ +/* host interface manager control */ +#define VS6624_USER_CMD 0x0180 /* user level control of operating states */ +/* host interface manager status */ +#define VS6624_STATE 0x0202 /* current state of the mode manager */ +/* run mode control */ +#define VS6624_METER_ON 0x0280 /* if false AE and AWB are disabled */ +/* mode setup */ +#define VS6624_ACTIVE_PIPE_SETUP 0x0302 /* select the active bank for non view live mode */ +#define VS6624_SENSOR_MODE 0x0308 /* select the different sensor mode */ +/* pipe setup bank0 */ +#define VS6624_IMAGE_SIZE0 0x0380 /* required output dimension */ +#define VS6624_MAN_HSIZE0_MSB 0x0383 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE0_LSB 0x0384 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE0_MSB 0x0387 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE0_LSB 0x0388 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP0_MSB 0x038B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP0_LSB 0x038C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP0_MSB 0x038F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP0_LSB 0x0390 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL0 0x0392 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP0_MSB 0x0395 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP0_LSB 0x0396 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP0_MSB 0x0399 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP0_LSB 0x039A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL0 0x039C /* control pan operation */ +#define VS6624_CROP_CTRL0 0x039E /* select cropping mode */ +#define VS6624_CROP_HSTART0_MSB 0x03A1 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART0_LSB 0x03A2 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE0_MSB 0x03A5 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE0_LSB 0x03A6 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART0_MSB 0x03A9 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART0_LSB 0x03AA /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE0_MSB 0x03AD /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE0_LSB 0x03AE /* set the cropping V size LSB */ +#define VS6624_IMG_FMT0 0x03B0 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN0 0x03B2 /* set bayer output alignment */ +#define VS6624_CONTRAST0 0x03B4 /* contrast control for output */ +#define VS6624_SATURATION0 0x03B6 /* saturation control for output */ +#define VS6624_GAMMA0 0x03B8 /* gamma settings */ +#define VS6624_HMIRROR0 0x03BA /* horizontal image orientation flip */ +#define VS6624_VFLIP0 0x03BC /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID0 0x03BE /* logical DMA channel number */ +/* pipe setup bank1 */ +#define VS6624_IMAGE_SIZE1 0x0400 /* required output dimension */ +#define VS6624_MAN_HSIZE1_MSB 0x0403 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE1_LSB 0x0404 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE1_MSB 0x0407 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE1_LSB 0x0408 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP1_MSB 0x040B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP1_LSB 0x040C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP1_MSB 0x040F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP1_LSB 0x0410 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL1 0x0412 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP1_MSB 0x0415 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP1_LSB 0x0416 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP1_MSB 0x0419 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP1_LSB 0x041A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL1 0x041C /* control pan operation */ +#define VS6624_CROP_CTRL1 0x041E /* select cropping mode */ +#define VS6624_CROP_HSTART1_MSB 0x0421 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART1_LSB 0x0422 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE1_MSB 0x0425 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE1_LSB 0x0426 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART1_MSB 0x0429 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART1_LSB 0x042A /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE1_MSB 0x042D /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE1_LSB 0x042E /* set the cropping V size LSB */ +#define VS6624_IMG_FMT1 0x0430 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN1 0x0432 /* set bayer output alignment */ +#define VS6624_CONTRAST1 0x0434 /* contrast control for output */ +#define VS6624_SATURATION1 0x0436 /* saturation control for output */ +#define VS6624_GAMMA1 0x0438 /* gamma settings */ +#define VS6624_HMIRROR1 0x043A /* horizontal image orientation flip */ +#define VS6624_VFLIP1 0x043C /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID1 0x043E /* logical DMA channel number */ +/* view live control */ +#define VS6624_VIEW_LIVE_EN 0x0480 /* enable view live mode */ +#define VS6624_INIT_PIPE_SETUP 0x0482 /* select initial pipe setup bank */ +/* view live status */ +#define VS6624_CUR_PIPE_SETUP 0x0500 /* indicates most recently applied setup bank */ +/* power management */ +#define VS6624_TIME_TO_POWER_DOWN 0x0580 /* automatically transition time to stop mode */ +/* video timing parameter host inputs */ +#define VS6624_EXT_CLK_FREQ_NUM_MSB 0x0605 /* external clock frequency numerator MSB */ +#define VS6624_EXT_CLK_FREQ_NUM_LSB 0x0606 /* external clock frequency numerator LSB */ +#define VS6624_EXT_CLK_FREQ_DEN 0x0608 /* external clock frequency denominator */ +/* video timing control */ +#define VS6624_SYS_CLK_MODE 0x0880 /* decides system clock frequency */ +/* frame dimension parameter host inputs */ +#define VS6624_LIGHT_FREQ 0x0C80 /* AC frequency used for flicker free time */ +#define VS6624_FLICKER_COMPAT 0x0C82 /* flicker compatible frame length */ +/* static frame rate control */ +#define VS6624_FR_NUM_MSB 0x0D81 /* desired frame rate numerator MSB */ +#define VS6624_FR_NUM_LSB 0x0D82 /* desired frame rate numerator LSB */ +#define VS6624_FR_DEN 0x0D84 /* desired frame rate denominator */ +/* automatic frame rate control */ +#define VS6624_DISABLE_FR_DAMPER 0x0E80 /* defines frame rate mode */ +#define VS6624_MIN_DAMPER_OUT_MSB 0x0E8C /* minimum frame rate MSB */ +#define VS6624_MIN_DAMPER_OUT_LSB 0x0E8A /* minimum frame rate LSB */ +/* exposure controls */ +#define VS6624_EXPO_MODE 0x1180 /* exposure mode */ +#define VS6624_EXPO_METER 0x1182 /* weights to be associated with the zones */ +#define VS6624_EXPO_TIME_NUM 0x1184 /* exposure time numerator */ +#define VS6624_EXPO_TIME_DEN 0x1186 /* exposure time denominator */ +#define VS6624_EXPO_TIME_MSB 0x1189 /* exposure time for the Manual Mode MSB */ +#define VS6624_EXPO_TIME_LSB 0x118A /* exposure time for the Manual Mode LSB */ +#define VS6624_EXPO_COMPENSATION 0x1190 /* exposure compensation */ +#define VS6624_DIRECT_COARSE_MSB 0x1195 /* coarse integration lines for Direct Mode MSB */ +#define VS6624_DIRECT_COARSE_LSB 0x1196 /* coarse integration lines for Direct Mode LSB */ +#define VS6624_DIRECT_FINE_MSB 0x1199 /* fine integration pixels for Direct Mode MSB */ +#define VS6624_DIRECT_FINE_LSB 0x119A /* fine integration pixels for Direct Mode LSB */ +#define VS6624_DIRECT_ANAL_GAIN_MSB 0x119D /* analog gain for Direct Mode MSB */ +#define VS6624_DIRECT_ANAL_GAIN_LSB 0x119E /* analog gain for Direct Mode LSB */ +#define VS6624_DIRECT_DIGI_GAIN_MSB 0x11A1 /* digital gain for Direct Mode MSB */ +#define VS6624_DIRECT_DIGI_GAIN_LSB 0x11A2 /* digital gain for Direct Mode LSB */ +#define VS6624_FLASH_COARSE_MSB 0x11A5 /* coarse integration lines for Flash Gun Mode MSB */ +#define VS6624_FLASH_COARSE_LSB 0x11A6 /* coarse integration lines for Flash Gun Mode LSB */ +#define VS6624_FLASH_FINE_MSB 0x11A9 /* fine integration pixels for Flash Gun Mode MSB */ +#define VS6624_FLASH_FINE_LSB 0x11AA /* fine integration pixels for Flash Gun Mode LSB */ +#define VS6624_FLASH_ANAL_GAIN_MSB 0x11AD /* analog gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_ANAL_GAIN_LSB 0x11AE /* analog gain for Flash Gun Mode LSB */ +#define VS6624_FLASH_DIGI_GAIN_MSB 0x11B1 /* digital gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_DIGI_GAIN_LSB 0x11B2 /* digital gain for Flash Gun Mode LSB */ +#define VS6624_FREEZE_AE 0x11B4 /* freeze auto exposure */ +#define VS6624_MAX_INT_TIME_MSB 0x11B7 /* user maximum integration time MSB */ +#define VS6624_MAX_INT_TIME_LSB 0x11B8 /* user maximum integration time LSB */ +#define VS6624_FLASH_AG_THR_MSB 0x11BB /* recommend flash gun analog gain threshold MSB */ +#define VS6624_FLASH_AG_THR_LSB 0x11BC /* recommend flash gun analog gain threshold LSB */ +#define VS6624_ANTI_FLICKER_MODE 0x11C0 /* anti flicker mode */ +/* white balance control */ +#define VS6624_WB_MODE 0x1480 /* set white balance mode */ +#define VS6624_MAN_RG 0x1482 /* user setting for red channel gain */ +#define VS6624_MAN_GG 0x1484 /* user setting for green channel gain */ +#define VS6624_MAN_BG 0x1486 /* user setting for blue channel gain */ +#define VS6624_FLASH_RG_MSB 0x148B /* red gain for Flash Gun MSB */ +#define VS6624_FLASH_RG_LSB 0x148C /* red gain for Flash Gun LSB */ +#define VS6624_FLASH_GG_MSB 0x148F /* green gain for Flash Gun MSB */ +#define VS6624_FLASH_GG_LSB 0x1490 /* green gain for Flash Gun LSB */ +#define VS6624_FLASH_BG_MSB 0x1493 /* blue gain for Flash Gun MSB */ +#define VS6624_FLASH_BG_LSB 0x1494 /* blue gain for Flash Gun LSB */ +/* sensor setup */ +#define VS6624_BC_OFFSET 0x1990 /* Black Correction Offset */ +/* image stability */ +#define VS6624_STABLE_WB 0x1900 /* white balance stable */ +#define VS6624_STABLE_EXPO 0x1902 /* exposure stable */ +#define VS6624_STABLE 0x1906 /* system stable */ +/* flash control */ +#define VS6624_FLASH_MODE 0x1A80 /* flash mode */ +#define VS6624_FLASH_OFF_LINE_MSB 0x1A83 /* off line at flash pulse mode MSB */ +#define VS6624_FLASH_OFF_LINE_LSB 0x1A84 /* off line at flash pulse mode LSB */ +/* flash status */ +#define VS6624_FLASH_RECOM 0x1B00 /* flash gun is recommended */ +#define VS6624_FLASH_GRAB_COMPLETE 0x1B02 /* flash gun image has been grabbed */ +/* scythe filter controls */ +#define VS6624_SCYTHE_FILTER 0x1D80 /* disable scythe defect correction */ +/* jack filter controls */ +#define VS6624_JACK_FILTER 0x1E00 /* disable jack defect correction */ +/* demosaic control */ +#define VS6624_ANTI_ALIAS_FILTER 0x1E80 /* anti alias filter suppress */ +/* color matrix dampers */ +#define VS6624_CM_DISABLE 0x1F00 /* disable color matrix damper */ +#define VS6624_CM_LOW_THR_MSB 0x1F03 /* low threshold for exposure MSB */ +#define VS6624_CM_LOW_THR_LSB 0x1F04 /* low threshold for exposure LSB */ +#define VS6624_CM_HIGH_THR_MSB 0x1F07 /* high threshold for exposure MSB */ +#define VS6624_CM_HIGH_THR_LSB 0x1F08 /* high threshold for exposure LSB */ +#define VS6624_CM_MIN_OUT_MSB 0x1F0B /* minimum possible damper output MSB */ +#define VS6624_CM_MIN_OUT_LSB 0x1F0C /* minimum possible damper output LSB */ +/* peaking control */ +#define VS6624_PEAK_GAIN 0x2000 /* controls peaking gain */ +#define VS6624_PEAK_G_DISABLE 0x2002 /* disable peak gain damping */ +#define VS6624_PEAK_LOW_THR_G_MSB 0x2005 /* low threshold for exposure for gain MSB */ +#define VS6624_PEAK_LOW_THR_G_LSB 0x2006 /* low threshold for exposure for gain LSB */ +#define VS6624_PEAK_HIGH_THR_G_MSB 0x2009 /* high threshold for exposure for gain MSB */ +#define VS6624_PEAK_HIGH_THR_G_LSB 0x200A /* high threshold for exposure for gain LSB */ +#define VS6624_PEAK_MIN_OUT_G_MSB 0x200D /* minimum damper output for gain MSB */ +#define VS6624_PEAK_MIN_OUT_G_LSB 0x200E /* minimum damper output for gain LSB */ +#define VS6624_PEAK_LOW_THR 0x2010 /* adjust degree of coring */ +#define VS6624_PEAK_C_DISABLE 0x2012 /* disable coring damping */ +#define VS6624_PEAK_HIGH_THR 0x2014 /* adjust maximum gain */ +#define VS6624_PEAK_LOW_THR_C_MSB 0x2017 /* low threshold for exposure for coring MSB */ +#define VS6624_PEAK_LOW_THR_C_LSB 0x2018 /* low threshold for exposure for coring LSB */ +#define VS6624_PEAK_HIGH_THR_C_MSB 0x201B /* high threshold for exposure for coring MSB */ +#define VS6624_PEAK_HIGH_THR_C_LSB 0x201C /* high threshold for exposure for coring LSB */ +#define VS6624_PEAK_MIN_OUT_C_MSB 0x201F /* minimum damper output for coring MSB */ +#define VS6624_PEAK_MIN_OUT_C_LSB 0x2020 /* minimum damper output for coring LSB */ +/* pipe 0 RGB to YUV matrix manual control */ +#define VS6624_RYM0_MAN_CTRL 0x2180 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM0_W00_MSB 0x2183 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W00_LSB 0x2184 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W01_MSB 0x2187 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W01_LSB 0x2188 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W02_MSB 0x218C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W02_LSB 0x218D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W10_MSB 0x2190 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W10_LSB 0x218F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W11_MSB 0x2193 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W11_LSB 0x2194 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W12_MSB 0x2197 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W12_LSB 0x2198 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W20_MSB 0x219B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W20_LSB 0x219C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W21_MSB 0x21A0 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W21_LSB 0x219F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W22_MSB 0x21A3 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W22_LSB 0x21A4 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_YINY_MSB 0x21A7 /* Y in Y MSB */ +#define VS6624_RYM0_YINY_LSB 0x21A8 /* Y in Y LSB */ +#define VS6624_RYM0_YINCB_MSB 0x21AB /* Y in Cb MSB */ +#define VS6624_RYM0_YINCB_LSB 0x21AC /* Y in Cb LSB */ +#define VS6624_RYM0_YINCR_MSB 0x21B0 /* Y in Cr MSB */ +#define VS6624_RYM0_YINCR_LSB 0x21AF /* Y in Cr LSB */ +/* pipe 1 RGB to YUV matrix manual control */ +#define VS6624_RYM1_MAN_CTRL 0x2200 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM1_W00_MSB 0x2203 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W00_LSB 0x2204 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W01_MSB 0x2207 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W01_LSB 0x2208 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W02_MSB 0x220C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W02_LSB 0x220D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W10_MSB 0x2210 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W10_LSB 0x220F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W11_MSB 0x2213 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W11_LSB 0x2214 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W12_MSB 0x2217 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W12_LSB 0x2218 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W20_MSB 0x221B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W20_LSB 0x221C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W21_MSB 0x2220 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W21_LSB 0x221F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W22_MSB 0x2223 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W22_LSB 0x2224 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_YINY_MSB 0x2227 /* Y in Y MSB */ +#define VS6624_RYM1_YINY_LSB 0x2228 /* Y in Y LSB */ +#define VS6624_RYM1_YINCB_MSB 0x222B /* Y in Cb MSB */ +#define VS6624_RYM1_YINCB_LSB 0x222C /* Y in Cb LSB */ +#define VS6624_RYM1_YINCR_MSB 0x2220 /* Y in Cr MSB */ +#define VS6624_RYM1_YINCR_LSB 0x222F /* Y in Cr LSB */ +/* pipe 0 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL0 0x2280 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R0 0x2282 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G0 0x2284 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B0 0x2286 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R0 0x2288 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G0 0x228A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B0 0x228C /* unpeaked blue channel gamma value */ +/* pipe 1 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL1 0x2300 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R1 0x2302 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G1 0x2304 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B1 0x2306 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R1 0x2308 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G1 0x230A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B1 0x230C /* unpeaked blue channel gamma value */ +/* fade to black */ +#define VS6624_F2B_DISABLE 0x2480 /* disable fade to black */ +#define VS6624_F2B_BLACK_VAL_MSB 0x2483 /* black value MSB */ +#define VS6624_F2B_BLACK_VAL_LSB 0x2484 /* black value LSB */ +#define VS6624_F2B_LOW_THR_MSB 0x2487 /* low threshold for exposure MSB */ +#define VS6624_F2B_LOW_THR_LSB 0x2488 /* low threshold for exposure LSB */ +#define VS6624_F2B_HIGH_THR_MSB 0x248B /* high threshold for exposure MSB */ +#define VS6624_F2B_HIGH_THR_LSB 0x248C /* high threshold for exposure LSB */ +#define VS6624_F2B_MIN_OUT_MSB 0x248F /* minimum damper output MSB */ +#define VS6624_F2B_MIN_OUT_LSB 0x2490 /* minimum damper output LSB */ +/* output formatter control */ +#define VS6624_CODE_CK_EN 0x2580 /* code check enable */ +#define VS6624_BLANK_FMT 0x2582 /* blank format */ +#define VS6624_SYNC_CODE_SETUP 0x2584 /* sync code setup */ +#define VS6624_HSYNC_SETUP 0x2586 /* H sync setup */ +#define VS6624_VSYNC_SETUP 0x2588 /* V sync setup */ +#define VS6624_PCLK_SETUP 0x258A /* PCLK setup */ +#define VS6624_PCLK_EN 0x258C /* PCLK enable */ +#define VS6624_OPF_SP_SETUP 0x258E /* output formatter sp setup */ +#define VS6624_BLANK_DATA_MSB 0x2590 /* blank data MSB */ +#define VS6624_BLANK_DATA_LSB 0x2592 /* blank data LSB */ +#define VS6624_RGB_SETUP 0x2594 /* RGB setup */ +#define VS6624_YUV_SETUP 0x2596 /* YUV setup */ +#define VS6624_VSYNC_RIS_COARSE_H 0x2598 /* V sync rising coarse high */ +#define VS6624_VSYNC_RIS_COARSE_L 0x259A /* V sync rising coarse low */ +#define VS6624_VSYNC_RIS_FINE_H 0x259C /* V sync rising fine high */ +#define VS6624_VSYNC_RIS_FINE_L 0x259E /* V sync rising fine low */ +#define VS6624_VSYNC_FALL_COARSE_H 0x25A0 /* V sync falling coarse high */ +#define VS6624_VSYNC_FALL_COARSE_L 0x25A2 /* V sync falling coarse low */ +#define VS6624_VSYNC_FALL_FINE_H 0x25A4 /* V sync falling fine high */ +#define VS6624_VSYNC_FALL_FINE_L 0x25A6 /* V sync falling fine low */ +#define VS6624_HSYNC_RIS_H 0x25A8 /* H sync rising high */ +#define VS6624_HSYNC_RIS_L 0x25AA /* H sync rising low */ +#define VS6624_HSYNC_FALL_H 0x25AC /* H sync falling high */ +#define VS6624_HSYNC_FALL_L 0x25AE /* H sync falling low */ +#define VS6624_OUT_IF 0x25B0 /* output interface */ +#define VS6624_CCP_EXT_DATA 0x25B2 /* CCP extra data */ +/* NoRA controls */ +#define VS6624_NORA_DISABLE 0x2600 /* NoRA control mode */ +#define VS6624_NORA_USAGE 0x2602 /* usage */ +#define VS6624_NORA_SPLIT_KN 0x2604 /* split kn */ +#define VS6624_NORA_SPLIT_NI 0x2606 /* split ni */ +#define VS6624_NORA_TIGHT_G 0x2608 /* tight green */ +#define VS6624_NORA_DISABLE_NP 0x260A /* disable noro promoting */ +#define VS6624_NORA_LOW_THR_MSB 0x260D /* low threshold for exposure MSB */ +#define VS6624_NORA_LOW_THR_LSB 0x260E /* low threshold for exposure LSB */ +#define VS6624_NORA_HIGH_THR_MSB 0x2611 /* high threshold for exposure MSB */ +#define VS6624_NORA_HIGH_THR_LSB 0x2612 /* high threshold for exposure LSB */ +#define VS6624_NORA_MIN_OUT_MSB 0x2615 /* minimum damper output MSB */ +#define VS6624_NORA_MIN_OUT_LSB 0x2616 /* minimum damper output LSB */ + +#endif diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 453dbbd1e6e8..7fd7ac567e1a 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -129,9 +129,9 @@ MODULE_LICENSE("GPL"); MODULE_VERSION("0.33.1"); #ifdef MODULE -static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; +static char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; #else -static const char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; +static char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; #endif module_param_array(pardev, charp, NULL, 0); MODULE_PARM_DESC(pardev, "pardev: where to search for\n" diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index a22f765e968a..3bb99e93febe 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -291,15 +291,4 @@ static struct i2c_driver wm8739_driver = { .id_table = wm8739_id, }; -static __init int init_wm8739(void) -{ - return i2c_add_driver(&wm8739_driver); -} - -static __exit void exit_wm8739(void) -{ - i2c_del_driver(&wm8739_driver); -} - -module_init(init_wm8739); -module_exit(exit_wm8739); +module_i2c_driver(wm8739_driver); diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 9cedb1e69b58..bee77ea9f49e 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -339,15 +339,4 @@ static struct i2c_driver wm8775_driver = { .id_table = wm8775_id, }; -static __init int init_wm8775(void) -{ - return i2c_add_driver(&wm8775_driver); -} - -static __exit void exit_wm8775(void) -{ - i2c_del_driver(&wm8775_driver); -} - -module_init(init_wm8775); -module_exit(exit_wm8775); +module_i2c_driver(wm8775_driver); |