diff options
| author | Ezequiel Garcia <ezequiel@collabora.com> | 2019-08-08 08:05:40 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-08-15 08:08:07 -0300 |
| commit | 092e8eb90a7dc7dd210cd4e2ea36075d0a7f96af (patch) | |
| tree | 27ad070c007eeb404c162b9eeb693929c5a29371 /drivers/media | |
| parent | 7ef57be07ac146e70535747797ef4aee0f06e9f9 (diff) | |
| download | linux-092e8eb90a7dc7dd210cd4e2ea36075d0a7f96af.tar.bz2 | |
media: i2c: ov5645: Fix power sequence
This is mostly a port of Jacopo's fix:
commit aa4bb8b8838ffcc776a79f49a4d7476b82405349
Author: Jacopo Mondi <jacopo@jmondi.org>
Date: Fri Jul 6 05:51:52 2018 -0400
media: ov5640: Re-work MIPI startup sequence
In the OV5645 case, the changes are:
- At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in
LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode.
- At set_power(0) time power down MIPI Tx/Rx (in addition to the current
power down of regulators and clock gating).
- At s_stream time enable/disable the MIPI interface output.
With this commit the sensor is able to enter LP-11 mode during power up,
as expected by some CSI-2 controllers.
Many thanks to Fabio Estevam for his help debugging this issue.
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/i2c/ov5645.c | 26 |
1 files changed, 18 insertions, 8 deletions
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c index 7721cce8353c..a6c17d15d754 100644 --- a/drivers/media/i2c/ov5645.c +++ b/drivers/media/i2c/ov5645.c @@ -41,6 +41,8 @@ #define OV5645_CHIP_ID_HIGH_BYTE 0x56 #define OV5645_CHIP_ID_LOW 0x300b #define OV5645_CHIP_ID_LOW_BYTE 0x45 +#define OV5645_IO_MIPI_CTRL00 0x300e +#define OV5645_PAD_OUTPUT00 0x3019 #define OV5645_AWB_MANUAL_CONTROL 0x3406 #define OV5645_AWB_MANUAL_ENABLE BIT(0) #define OV5645_AEC_PK_MANUAL 0x3503 @@ -51,6 +53,7 @@ #define OV5645_ISP_VFLIP BIT(2) #define OV5645_TIMING_TC_REG21 0x3821 #define OV5645_SENSOR_MIRROR BIT(1) +#define OV5645_MIPI_CTRL00 0x4800 #define OV5645_PRE_ISP_TEST_SETTING_1 0x503d #define OV5645_TEST_PATTERN_MASK 0x3 #define OV5645_SET_TEST_PATTERN(x) ((x) & OV5645_TEST_PATTERN_MASK) @@ -124,7 +127,6 @@ static const struct reg_value ov5645_global_init_setting[] = { { 0x3503, 0x07 }, { 0x3002, 0x1c }, { 0x3006, 0xc3 }, - { 0x300e, 0x45 }, { 0x3017, 0x00 }, { 0x3018, 0x00 }, { 0x302e, 0x0b }, @@ -353,7 +355,10 @@ static const struct reg_value ov5645_global_init_setting[] = { { 0x3a1f, 0x14 }, { 0x0601, 0x02 }, { 0x3008, 0x42 }, - { 0x3008, 0x02 } + { 0x3008, 0x02 }, + { OV5645_IO_MIPI_CTRL00, 0x40 }, + { OV5645_MIPI_CTRL00, 0x24 }, + { OV5645_PAD_OUTPUT00, 0x70 } }; static const struct reg_value ov5645_setting_sxga[] = { @@ -690,13 +695,9 @@ static int ov5645_s_power(struct v4l2_subdev *sd, int on) goto exit; } - ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, - OV5645_SYSTEM_CTRL0_STOP); - if (ret < 0) { - ov5645_set_power_off(ov5645); - goto exit; - } + usleep_range(500, 1000); } else { + ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58); ov5645_set_power_off(ov5645); } } @@ -1002,11 +1003,20 @@ static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable) dev_err(ov5645->dev, "could not sync v4l2 controls\n"); return ret; } + + ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45); + if (ret < 0) + return ret; + ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, OV5645_SYSTEM_CTRL0_START); if (ret < 0) return ret; } else { + ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40); + if (ret < 0) + return ret; + ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, OV5645_SYSTEM_CTRL0_STOP); if (ret < 0) |