diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-11 08:45:40 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-11 08:45:40 -0800 |
| commit | 3e63430a5cc26bc90a6e33ab33f901196b7b63ac (patch) | |
| tree | bdc92e6cbaccc26f88d4c71fddbe54a86e5e707d /drivers/media/usb | |
| parent | 6fc26fc5783add961533c819995bd97db05990f0 (diff) | |
| parent | 4bad5d2d25099a42e146d7b18d2b98950ed287f5 (diff) | |
| download | linux-3e63430a5cc26bc90a6e33ab33f901196b7b63ac.tar.bz2 | |
Merge tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Some documentation updates and a few new pixel formats
- Stop btcx-risc abuse by cx88 and move it to bt8xx driver
- New platform driver: am437x
- New webcam driver: toptek
- New remote controller hardware protocols added to img-ir driver
- Removal of a few very old drivers that relies on old kABIs and are
for very hard to find hardware: parallel port webcam drivers
(bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino)
- Removal of the USB Telegent driver (tlg2300). The company that
developed this driver has long gone and the hardware is hard to find.
As it relies on a legacy set of kABI symbols and nobody seems to care
about it, remove it.
- several improvements at rtl2832 driver
- conversion on cx28521 and au0828 to use videobuf2 (VB2)
- several improvements, fixups and board additions
* tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
[media] dvb_net: Convert local hex dump to print_hex_dump_debug
[media] dvb_net: Use standard debugging facilities
[media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses
[media] staging: lirc_serial: adjust boolean assignments
[media] stb0899: use sign_extend32() for sign extension
[media] si2168: add support for 1.7MHz bandwidth
[media] si2168: return error if set_frontend is called with invalid parameters
[media] lirc_dev: avoid potential null-dereference
[media] mn88472: simplify bandwidth registers setting code
[media] dvb: tc90522: re-add symbol-rate report
[media] lmedm04: add read snr, signal strength and ber call backs
[media] lmedm04: Create frontend call back for read status
[media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks
[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb
[media] lmedm04: Increase Interupt due time to 200 msec
[media] cx88-dvb: whitespace cleanup
[media] rtl28xxu: properly initialize pdata
[media] rtl2832: declare functions as static
[media] rtl2830: declare functions as static
[media] rtl2832_sdr: add kernel-doc comments for platform_data
...
Diffstat (limited to 'drivers/media/usb')
97 files changed, 1958 insertions, 2008 deletions
diff --git a/drivers/media/usb/au0828/Kconfig b/drivers/media/usb/au0828/Kconfig index 1d410ac8f9a8..78b797e0b434 100644 --- a/drivers/media/usb/au0828/Kconfig +++ b/drivers/media/usb/au0828/Kconfig @@ -4,7 +4,7 @@ config VIDEO_AU0828 depends on I2C && INPUT && DVB_CORE && USB select I2C_ALGOBIT select VIDEO_TVEEPROM - select VIDEOBUF_VMALLOC + select VIDEOBUF2_VMALLOC select DVB_AU8522_DTV if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index da87f1cc31a9..edc27355f271 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -44,7 +44,7 @@ static void hvr950q_cs5340_audio(void *priv, int enable) struct au0828_board au0828_boards[] = { [AU0828_BOARD_UNKNOWN] = { .name = "Unknown board", - .tuner_type = UNSET, + .tuner_type = -1U, .tuner_addr = ADDR_UNSET, }, [AU0828_BOARD_HAUPPAUGE_HVR850] = { diff --git a/drivers/media/usb/au0828/au0828-vbi.c b/drivers/media/usb/au0828/au0828-vbi.c index 932d24f42b24..f67247cf1a5a 100644 --- a/drivers/media/usb/au0828/au0828-vbi.c +++ b/drivers/media/usb/au0828/au0828-vbi.c @@ -28,111 +28,67 @@ #include <linux/init.h> #include <linux/slab.h> -static unsigned int vbibufs = 5; -module_param(vbibufs, int, 0644); -MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32"); - /* ------------------------------------------------------------------ */ -static void -free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf) +static int vbi_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) { - struct au0828_fh *fh = vq->priv_data; - struct au0828_dev *dev = fh->dev; - unsigned long flags = 0; - if (in_interrupt()) - BUG(); - - /* We used to wait for the buffer to finish here, but this didn't work - because, as we were keeping the state as VIDEOBUF_QUEUED, - videobuf_queue_cancel marked it as finished for us. - (Also, it could wedge forever if the hardware was misconfigured.) - - This should be safe; by the time we get here, the buffer isn't - queued anymore. If we ever start marking the buffers as - VIDEOBUF_ACTIVE, it won't be, though. - */ - spin_lock_irqsave(&dev->slock, flags); - if (dev->isoc_ctl.vbi_buf == buf) - dev->isoc_ctl.vbi_buf = NULL; - spin_unlock_irqrestore(&dev->slock, flags); + struct au0828_dev *dev = vb2_get_drv_priv(vq); + unsigned long img_size = dev->vbi_width * dev->vbi_height * 2; + unsigned long size; - videobuf_vmalloc_free(&buf->vb); - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - -static int -vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) -{ - struct au0828_fh *fh = q->priv_data; - struct au0828_dev *dev = fh->dev; + size = fmt ? (fmt->fmt.vbi.samples_per_line * + (fmt->fmt.vbi.count[0] + fmt->fmt.vbi.count[1])) : img_size; + if (size < img_size) + return -EINVAL; - *size = dev->vbi_width * dev->vbi_height * 2; + *nplanes = 1; + sizes[0] = size; - if (0 == *count) - *count = vbibufs; - if (*count < 2) - *count = 2; - if (*count > 32) - *count = 32; return 0; } -static int -vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, - enum v4l2_field field) +static int vbi_buffer_prepare(struct vb2_buffer *vb) { - struct au0828_fh *fh = q->priv_data; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); - int rc = 0; + unsigned long size; - buf->vb.size = dev->vbi_width * dev->vbi_height * 2; + size = dev->vbi_width * dev->vbi_height * 2; - if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + if (vb2_plane_size(vb, 0) < size) { + pr_err("%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), size); return -EINVAL; - - buf->vb.width = dev->vbi_width; - buf->vb.height = dev->vbi_height; - buf->vb.field = field; - - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - rc = videobuf_iolock(q, &buf->vb, NULL); - if (rc < 0) - goto fail; } + vb2_set_plane_payload(&buf->vb, 0, size); - buf->vb.state = VIDEOBUF_PREPARED; return 0; - -fail: - free_buffer(q, buf); - return rc; } static void -vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) -{ - struct au0828_buffer *buf = container_of(vb, - struct au0828_buffer, - vb); - struct au0828_fh *fh = vq->priv_data; - struct au0828_dev *dev = fh->dev; - struct au0828_dmaqueue *vbiq = &dev->vbiq; - - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &vbiq->active); -} - -static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +vbi_buffer_queue(struct vb2_buffer *vb) { + struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); - free_buffer(q, buf); + struct au0828_dmaqueue *vbiq = &dev->vbiq; + unsigned long flags = 0; + + buf->mem = vb2_plane_vaddr(vb, 0); + buf->length = vb2_plane_size(vb, 0); + + spin_lock_irqsave(&dev->slock, flags); + list_add_tail(&buf->list, &vbiq->active); + spin_unlock_irqrestore(&dev->slock, flags); } -struct videobuf_queue_ops au0828_vbi_qops = { - .buf_setup = vbi_setup, - .buf_prepare = vbi_prepare, - .buf_queue = vbi_queue, - .buf_release = vbi_release, +struct vb2_ops au0828_vbi_qops = { + .queue_setup = vbi_queue_setup, + .buf_prepare = vbi_buffer_prepare, + .buf_queue = vbi_buffer_queue, + .start_streaming = au0828_start_analog_streaming, + .stop_streaming = au0828_stop_vbi_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, }; diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 5f337b118bff..a27cb5fcdef8 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -22,7 +22,6 @@ /* Developer Notes: * - * VBI support is not yet working * The hardware scaler supported is unimplemented * AC97 audio support is unimplemented (only i2s audio mode) * @@ -219,9 +218,6 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets, au0828_isocdbg("au0828: called au0828_prepare_isoc\n"); - /* De-allocates all pending stuff */ - au0828_uninit_isoc(dev); - dev->isoc_ctl.isoc_copy = isoc_copy; dev->isoc_ctl.num_bufs = num_bufs; @@ -285,8 +281,6 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets, } } - init_waitqueue_head(&dma_q->wq); - /* submit urbs and enables IRQ */ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); @@ -309,16 +303,12 @@ static inline void buffer_filled(struct au0828_dev *dev, struct au0828_buffer *buf) { /* Advice that buffer was filled */ - au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); - - buf->vb.state = VIDEOBUF_DONE; - buf->vb.field_count++; - v4l2_get_timestamp(&buf->vb.ts); + au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->top_field); - dev->isoc_ctl.buf = NULL; - - list_del(&buf->vb.queue); - wake_up(&buf->vb.done); + buf->vb.v4l2_buf.sequence = dev->frame_count++; + buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; + v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); } static inline void vbi_buffer_filled(struct au0828_dev *dev, @@ -326,16 +316,12 @@ static inline void vbi_buffer_filled(struct au0828_dev *dev, struct au0828_buffer *buf) { /* Advice that buffer was filled */ - au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); - - buf->vb.state = VIDEOBUF_DONE; - buf->vb.field_count++; - v4l2_get_timestamp(&buf->vb.ts); + au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->top_field); - dev->isoc_ctl.vbi_buf = NULL; - - list_del(&buf->vb.queue); - wake_up(&buf->vb.done); + buf->vb.v4l2_buf.sequence = dev->vbi_frame_count++; + buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; + v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); } /* @@ -354,8 +340,8 @@ static void au0828_copy_video(struct au0828_dev *dev, if (len == 0) return; - if (dma_q->pos + len > buf->vb.size) - len = buf->vb.size - dma_q->pos; + if (dma_q->pos + len > buf->length) + len = buf->length - dma_q->pos; startread = p; remain = len; @@ -373,11 +359,11 @@ static void au0828_copy_video(struct au0828_dev *dev, lencopy = bytesperline - currlinedone; lencopy = lencopy > remain ? remain : lencopy; - if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) { + if ((char *)startwrite + lencopy > (char *)outp + buf->length) { au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n", ((char *)startwrite + lencopy) - - ((char *)outp + buf->vb.size)); - remain = (char *)outp + buf->vb.size - (char *)startwrite; + ((char *)outp + buf->length)); + remain = (char *)outp + buf->length - (char *)startwrite; lencopy = remain; } if (lencopy <= 0) @@ -395,11 +381,11 @@ static void au0828_copy_video(struct au0828_dev *dev, lencopy = bytesperline; if ((char *)startwrite + lencopy > (char *)outp + - buf->vb.size) { + buf->length) { au0828_isocdbg("Overflow %zi bytes past buf end (2)\n", ((char *)startwrite + lencopy) - - ((char *)outp + buf->vb.size)); - lencopy = remain = (char *)outp + buf->vb.size - + ((char *)outp + buf->length)); + lencopy = remain = (char *)outp + buf->length - (char *)startwrite; } if (lencopy <= 0) @@ -435,7 +421,11 @@ static inline void get_next_buf(struct au0828_dmaqueue *dma_q, } /* Get the next buffer */ - *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); + *buf = list_entry(dma_q->active.next, struct au0828_buffer, list); + /* Cleans up buffer - Useful for testing for frame/URB loss */ + list_del(&(*buf)->list); + dma_q->pos = 0; + (*buf)->vb_buf = (*buf)->mem; dev->isoc_ctl.buf = *buf; return; @@ -473,8 +463,8 @@ static void au0828_copy_vbi(struct au0828_dev *dev, bytesperline = dev->vbi_width; - if (dma_q->pos + len > buf->vb.size) - len = buf->vb.size - dma_q->pos; + if (dma_q->pos + len > buf->length) + len = buf->length - dma_q->pos; startread = p; startwrite = outp + (dma_q->pos / 2); @@ -497,7 +487,6 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, struct au0828_buffer **buf) { struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq); - char *outp; if (list_empty(&dma_q->active)) { au0828_isocdbg("No active queue to serve\n"); @@ -507,13 +496,12 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, } /* Get the next buffer */ - *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); + *buf = list_entry(dma_q->active.next, struct au0828_buffer, list); /* Cleans up buffer - Useful for testing for frame/URB loss */ - outp = videobuf_to_vmalloc(&(*buf)->vb); - memset(outp, 0x00, (*buf)->vb.size); - + list_del(&(*buf)->list); + dma_q->pos = 0; + (*buf)->vb_buf = (*buf)->mem; dev->isoc_ctl.vbi_buf = *buf; - return; } @@ -549,11 +537,11 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) buf = dev->isoc_ctl.buf; if (buf != NULL) - outp = videobuf_to_vmalloc(&buf->vb); + outp = vb2_plane_vaddr(&buf->vb, 0); vbi_buf = dev->isoc_ctl.vbi_buf; if (vbi_buf != NULL) - vbioutp = videobuf_to_vmalloc(&vbi_buf->vb); + vbioutp = vb2_plane_vaddr(&vbi_buf->vb, 0); for (i = 0; i < urb->number_of_packets; i++) { int status = urb->iso_frame_desc[i].status; @@ -593,8 +581,8 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) if (vbi_buf == NULL) vbioutp = NULL; else - vbioutp = videobuf_to_vmalloc( - &vbi_buf->vb); + vbioutp = vb2_plane_vaddr( + &vbi_buf->vb, 0); /* Video */ if (buf != NULL) @@ -603,7 +591,7 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) if (buf == NULL) outp = NULL; else - outp = videobuf_to_vmalloc(&buf->vb); + outp = vb2_plane_vaddr(&buf->vb, 0); /* As long as isoc traffic is arriving, keep resetting the timer */ @@ -657,130 +645,59 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) return rc; } -static int -buffer_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) { - struct au0828_fh *fh = vq->priv_data; - *size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; + struct au0828_dev *dev = vb2_get_drv_priv(vq); + unsigned long img_size = dev->height * dev->bytesperline; + unsigned long size; - if (0 == *count) - *count = AU0828_DEF_BUF; + size = fmt ? fmt->fmt.pix.sizeimage : img_size; + if (size < img_size) + return -EINVAL; - if (*count < AU0828_MIN_BUF) - *count = AU0828_MIN_BUF; - return 0; -} + *nplanes = 1; + sizes[0] = size; -/* This is called *without* dev->slock held; please keep it that way */ -static void free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf) -{ - struct au0828_fh *fh = vq->priv_data; - struct au0828_dev *dev = fh->dev; - unsigned long flags = 0; - if (in_interrupt()) - BUG(); - - /* We used to wait for the buffer to finish here, but this didn't work - because, as we were keeping the state as VIDEOBUF_QUEUED, - videobuf_queue_cancel marked it as finished for us. - (Also, it could wedge forever if the hardware was misconfigured.) - - This should be safe; by the time we get here, the buffer isn't - queued anymore. If we ever start marking the buffers as - VIDEOBUF_ACTIVE, it won't be, though. - */ - spin_lock_irqsave(&dev->slock, flags); - if (dev->isoc_ctl.buf == buf) - dev->isoc_ctl.buf = NULL; - spin_unlock_irqrestore(&dev->slock, flags); - - videobuf_vmalloc_free(&buf->vb); - buf->vb.state = VIDEOBUF_NEEDS_INIT; + return 0; } static int -buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, - enum v4l2_field field) +buffer_prepare(struct vb2_buffer *vb) { - struct au0828_fh *fh = vq->priv_data; struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); - struct au0828_dev *dev = fh->dev; - int rc = 0, urb_init = 0; + struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); - buf->vb.size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; + buf->length = dev->height * dev->bytesperline; - if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + if (vb2_plane_size(vb, 0) < buf->length) { + pr_err("%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), buf->length); return -EINVAL; - - buf->vb.width = dev->width; - buf->vb.height = dev->height; - buf->vb.field = field; - - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - rc = videobuf_iolock(vq, &buf->vb, NULL); - if (rc < 0) { - pr_info("videobuf_iolock failed\n"); - goto fail; - } } - - if (!dev->isoc_ctl.num_bufs) - urb_init = 1; - - if (urb_init) { - rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, - AU0828_MAX_ISO_BUFS, dev->max_pkt_size, - au0828_isoc_copy); - if (rc < 0) { - pr_info("au0828_init_isoc failed\n"); - goto fail; - } - } - - buf->vb.state = VIDEOBUF_PREPARED; + vb2_set_plane_payload(&buf->vb, 0, buf->length); return 0; - -fail: - free_buffer(vq, buf); - return rc; } static void -buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +buffer_queue(struct vb2_buffer *vb) { struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); - struct au0828_fh *fh = vq->priv_data; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); struct au0828_dmaqueue *vidq = &dev->vidq; + unsigned long flags = 0; - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &vidq->active); -} - -static void buffer_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct au0828_buffer *buf = container_of(vb, - struct au0828_buffer, - vb); + buf->mem = vb2_plane_vaddr(vb, 0); + buf->length = vb2_plane_size(vb, 0); - free_buffer(vq, buf); + spin_lock_irqsave(&dev->slock, flags); + list_add_tail(&buf->list, &vidq->active); + spin_unlock_irqrestore(&dev->slock, flags); } -static struct videobuf_queue_ops au0828_video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/* ------------------------------------------------------------------ - V4L2 interface - ------------------------------------------------------------------*/ - static int au0828_i2s_init(struct au0828_dev *dev) { /* Enable i2s mode */ @@ -829,7 +746,7 @@ static int au0828_analog_stream_enable(struct au0828_dev *d) return 0; } -int au0828_analog_stream_disable(struct au0828_dev *d) +static int au0828_analog_stream_disable(struct au0828_dev *d) { dprintk(1, "au0828_analog_stream_disable called\n"); au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0); @@ -862,78 +779,133 @@ static int au0828_stream_interrupt(struct au0828_dev *dev) return 0; } -/* - * au0828_release_resources - * unregister v4l2 devices - */ -void au0828_analog_unregister(struct au0828_dev *dev) +int au0828_start_analog_streaming(struct vb2_queue *vq, unsigned int count) { - dprintk(1, "au0828_release_resources called\n"); - mutex_lock(&au0828_sysfs_lock); + struct au0828_dev *dev = vb2_get_drv_priv(vq); + int rc = 0; - if (dev->vdev) - video_unregister_device(dev->vdev); - if (dev->vbi_dev) - video_unregister_device(dev->vbi_dev); + dprintk(1, "au0828_start_analog_streaming called %d\n", + dev->streaming_users); - mutex_unlock(&au0828_sysfs_lock); -} + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + dev->frame_count = 0; + else + dev->vbi_frame_count = 0; + + if (dev->streaming_users == 0) { + /* If we were doing ac97 instead of i2s, it would go here...*/ + au0828_i2s_init(dev); + rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, + AU0828_MAX_ISO_BUFS, dev->max_pkt_size, + au0828_isoc_copy); + if (rc < 0) { + pr_info("au0828_init_isoc failed\n"); + return rc; + } + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + v4l2_device_call_all(&dev->v4l2_dev, 0, video, + s_stream, 1); + dev->vid_timeout_running = 1; + mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); + } else if (vq->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + dev->vbi_timeout_running = 1; + mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); + } + } + dev->streaming_users++; + return rc; +} -/* Usage lock check functions */ -static int res_get(struct au0828_fh *fh, unsigned int bit) +static void au0828_stop_streaming(struct vb2_queue *vq) { - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = vb2_get_drv_priv(vq); + struct au0828_dmaqueue *vidq = &dev->vidq; + unsigned long flags = 0; - if (fh->resources & bit) - /* have it already allocated */ - return 1; + dprintk(1, "au0828_stop_streaming called %d\n", dev->streaming_users); - /* is it free? */ - if (dev->resources & bit) { - /* no, someone else uses it */ - return 0; + if (dev->streaming_users-- == 1) + au0828_uninit_isoc(dev); + + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); + dev->vid_timeout_running = 0; + del_timer_sync(&dev->vid_timeout); + + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.buf != NULL) { + vb2_buffer_done(&dev->isoc_ctl.buf->vb, VB2_BUF_STATE_ERROR); + dev->isoc_ctl.buf = NULL; } - /* it's free, grab it */ - fh->resources |= bit; - dev->resources |= bit; - dprintk(1, "res: get %d\n", bit); + while (!list_empty(&vidq->active)) { + struct au0828_buffer *buf; - return 1; + buf = list_entry(vidq->active.next, struct au0828_buffer, list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + list_del(&buf->list); + } + spin_unlock_irqrestore(&dev->slock, flags); } -static int res_check(struct au0828_fh *fh, unsigned int bit) +void au0828_stop_vbi_streaming(struct vb2_queue *vq) { - return fh->resources & bit; -} + struct au0828_dev *dev = vb2_get_drv_priv(vq); + struct au0828_dmaqueue *vbiq = &dev->vbiq; + unsigned long flags = 0; -static int res_locked(struct au0828_dev *dev, unsigned int bit) -{ - return dev->resources & bit; -} + dprintk(1, "au0828_stop_vbi_streaming called %d\n", + dev->streaming_users); -static void res_free(struct au0828_fh *fh, unsigned int bits) -{ - struct au0828_dev *dev = fh->dev; + if (dev->streaming_users-- == 1) + au0828_uninit_isoc(dev); - BUG_ON((fh->resources & bits) != bits); + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.vbi_buf != NULL) { + vb2_buffer_done(&dev->isoc_ctl.vbi_buf->vb, + VB2_BUF_STATE_ERROR); + dev->isoc_ctl.vbi_buf = NULL; + } + while (!list_empty(&vbiq->active)) { + struct au0828_buffer *buf; + + buf = list_entry(vbiq->active.next, struct au0828_buffer, list); + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&dev->slock, flags); - fh->resources &= ~bits; - dev->resources &= ~bits; - dprintk(1, "res: put %d\n", bits); + dev->vbi_timeout_running = 0; + del_timer_sync(&dev->vbi_timeout); } -static int get_ressource(struct au0828_fh *fh) +static struct vb2_ops au0828_video_qops = { + .queue_setup = queue_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .start_streaming = au0828_start_analog_streaming, + .stop_streaming = au0828_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/* ------------------------------------------------------------------ + V4L2 interface + ------------------------------------------------------------------*/ +/* + * au0828_analog_unregister + * unregister v4l2 devices + */ +void au0828_analog_unregister(struct au0828_dev *dev) { - switch (fh->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - return AU0828_RESOURCE_VIDEO; - case V4L2_BUF_TYPE_VBI_CAPTURE: - return AU0828_RESOURCE_VBI; - default: - BUG(); - return 0; - } + dprintk(1, "au0828_analog_unregister called\n"); + mutex_lock(&au0828_sysfs_lock); + + if (dev->vdev) + video_unregister_device(dev->vdev); + if (dev->vbi_dev) + video_unregister_device(dev->vbi_dev); + + mutex_unlock(&au0828_sysfs_lock); } /* This function ensures that video frames continue to be delivered even if @@ -951,8 +923,8 @@ static void au0828_vid_buffer_timeout(unsigned long data) buf = dev->isoc_ctl.buf; if (buf != NULL) { - vid_data = videobuf_to_vmalloc(&buf->vb); - memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */ + vid_data = vb2_plane_vaddr(&buf->vb, 0); + memset(vid_data, 0x00, buf->length); /* Blank green frame */ buffer_filled(dev, dma_q, buf); } get_next_buf(dma_q, &buf); @@ -975,8 +947,8 @@ static void au0828_vbi_buffer_timeout(unsigned long data) buf = dev->isoc_ctl.vbi_buf; if (buf != NULL) { - vbi_data = videobuf_to_vmalloc(&buf->vb); - memset(vbi_data, 0x00, buf->vb.size); + vbi_data = vb2_plane_vaddr(&buf->vb, 0); + memset(vbi_data, 0x00, buf->length); vbi_buffer_filled(dev, dma_q, buf); } vbi_get_next_buf(dma_q, &buf); @@ -986,105 +958,65 @@ static void au0828_vbi_buffer_timeout(unsigned long data) spin_unlock_irqrestore(&dev->slock, flags); } - static int au0828_v4l2_open(struct file *filp) { - int ret = 0; - struct video_device *vdev = video_devdata(filp); struct au0828_dev *dev = video_drvdata(filp); - struct au0828_fh *fh; - int type; - - switch (vdev->vfl_type) { - case VFL_TYPE_GRABBER: - type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - break; - case VFL_TYPE_VBI: - type = V4L2_BUF_TYPE_VBI_CAPTURE; - break; - default: - return -EINVAL; - } - - fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL); - if (NULL == fh) { - dprintk(1, "Failed allocate au0828_fh struct!\n"); - return -ENOMEM; - } + int ret; - fh->type = type; - fh->dev = dev; - v4l2_fh_init(&fh->fh, vdev); - filp->private_data = fh; + dprintk(1, + "%s called std_set %d dev_state %d stream users %d users %d\n", + __func__, dev->std_set_in_tuner_core, dev->dev_state, + dev->streaming_users, dev->users); - if (mutex_lock_interruptible(&dev->lock)) { - kfree(fh); + if (mutex_lock_interruptible(&dev->lock)) return -ERESTARTSYS; + + ret = v4l2_fh_open(filp); + if (ret) { + au0828_isocdbg("%s: v4l2_fh_open() returned error %d\n", + __func__, ret); + mutex_unlock(&dev->lock); + return ret; } + if (dev->users == 0) { au0828_analog_stream_enable(dev); au0828_analog_stream_reset(dev); - - /* If we were doing ac97 instead of i2s, it would go here...*/ - au0828_i2s_init(dev); - dev->stream_state = STREAM_OFF; dev->dev_state |= DEV_INITIALIZED; } - dev->users++; mutex_unlock(&dev->lock); - - videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops, - NULL, &dev->slock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_INTERLACED, - sizeof(struct au0828_buffer), fh, - &dev->lock); - - /* VBI Setup */ - videobuf_queue_vmalloc_init(&fh->vb_vbiq, &au0828_vbi_qops, - NULL, &dev->slock, - V4L2_BUF_TYPE_VBI_CAPTURE, - V4L2_FIELD_SEQ_TB, - sizeof(struct au0828_buffer), fh, - &dev->lock); - v4l2_fh_add(&fh->fh); return ret; } static int au0828_v4l2_close(struct file *filp) { int ret; - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(filp); + struct video_device *vdev = video_devdata(filp); + + dprintk(1, + "%s called std_set %d dev_state %d stream users %d users %d\n", + __func__, dev->std_set_in_tuner_core, dev->dev_state, + dev->streaming_users, dev->users); - v4l2_fh_del(&fh->fh); - v4l2_fh_exit(&fh->fh); mutex_lock(&dev->lock); - if (res_check(fh, AU0828_RESOURCE_VIDEO)) { + if (vdev->vfl_type == VFL_TYPE_GRABBER && dev->vid_timeout_running) { /* Cancel timeout thread in case they didn't call streamoff */ dev->vid_timeout_running = 0; del_timer_sync(&dev->vid_timeout); - - videobuf_stop(&fh->vb_vidq); - res_free(fh, AU0828_RESOURCE_VIDEO); - } - - if (res_check(fh, AU0828_RESOURCE_VBI)) { + } else if (vdev->vfl_type == VFL_TYPE_VBI && + dev->vbi_timeout_running) { /* Cancel timeout thread in case they didn't call streamoff */ dev->vbi_timeout_running = 0; del_timer_sync(&dev->vbi_timeout); - - videobuf_stop(&fh->vb_vbiq); - res_free(fh, AU0828_RESOURCE_VBI); } - if (dev->users == 1 && video_is_registered(video_devdata(filp))) { - au0828_analog_stream_disable(dev); - - au0828_uninit_isoc(dev); + if (dev->dev_state == DEV_DISCONNECTED) + goto end; + if (dev->users == 1) { /* Save some power by putting tuner to sleep */ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); dev->std_set_in_tuner_core = 0; @@ -1095,13 +1027,10 @@ static int au0828_v4l2_close(struct file *filp) if (ret < 0) pr_info("Au0828 can't set alternate to 0!\n"); } - mutex_unlock(&dev->lock); - - videobuf_mmap_free(&fh->vb_vidq); - videobuf_mmap_free(&fh->vb_vbiq); - kfree(fh); +end: + _vb2_fop_release(filp, NULL); dev->users--; - wake_up_interruptible_nr(&dev->open, 1); + mutex_unlock(&dev->lock); return 0; } @@ -1113,6 +1042,9 @@ static void au0828_init_tuner(struct au0828_dev *dev) .type = V4L2_TUNER_ANALOG_TV, }; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + if (dev->std_set_in_tuner_core) return; dev->std_set_in_tuner_core = 1; @@ -1125,98 +1057,6 @@ static void au0828_init_tuner(struct au0828_dev *dev) i2c_gate_ctrl(dev, 0); } -static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf, - size_t count, loff_t *pos) -{ - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - au0828_init_tuner(dev); - mutex_unlock(&dev->lock); - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - if (res_locked(dev, AU0828_RESOURCE_VIDEO)) - return -EBUSY; - - return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, - filp->f_flags & O_NONBLOCK); - } - - if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - if (!res_get(fh, AU0828_RESOURCE_VBI)) - return -EBUSY; - - if (dev->vbi_timeout_running == 0) { - /* Handle case where caller tries to read without - calling streamon first */ - dev->vbi_timeout_running = 1; - mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); - } - - return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0, - filp->f_flags & O_NONBLOCK); - } - - return 0; -} - -static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait) -{ - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - unsigned long req_events = poll_requested_events(wait); - unsigned int res; - - if (check_dev(dev) < 0) - return POLLERR; - - res = v4l2_ctrl_poll(filp, wait); - if (!(req_events & (POLLIN | POLLRDNORM))) - return res; - - if (mutex_lock_interruptible(&dev->lock)) - return -ERESTARTSYS; - au0828_init_tuner(dev); - mutex_unlock(&dev->lock); - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - if (!res_get(fh, AU0828_RESOURCE_VIDEO)) - return POLLERR; - return res | videobuf_poll_stream(filp, &fh->vb_vidq, wait); - } - if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - if (!res_get(fh, AU0828_RESOURCE_VBI)) - return POLLERR; - return res | videobuf_poll_stream(filp, &fh->vb_vbiq, wait); - } - return POLLERR; -} - -static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) -{ - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma); - - return rc; -} - static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, struct v4l2_format *format) { @@ -1268,13 +1108,14 @@ static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, return 0; } - static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { struct video_device *vdev = video_devdata(file); - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); strlcpy(cap->driver, "au0828", sizeof(cap->driver)); strlcpy(cap->card, dev->board.name, sizeof(cap->card)); @@ -1300,6 +1141,8 @@ static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, if (f->index) return -EINVAL; + dprintk(1, "%s called\n", __func__); + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; strcpy(f->description, "Packed YUV2"); @@ -1312,8 +1155,10 @@ static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); f->fmt.pix.width = dev->width; f->fmt.pix.height = dev->height; @@ -1329,8 +1174,10 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); return au0828_set_format(dev, VIDIOC_TRY_FMT, f); } @@ -1338,15 +1185,17 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); int rc; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + rc = check_dev(dev); if (rc < 0) return rc; - if (videobuf_queue_is_busy(&fh->vb_vidq)) { + if (vb2_is_busy(&dev->vb_vidq)) { pr_info("%s queue busy\n", __func__); rc = -EBUSY; goto out; @@ -1359,8 +1208,16 @@ out: static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + + if (norm == dev->std) + return 0; + + if (dev->streaming_users > 0) + return -EBUSY; dev->std = norm; @@ -1383,8 +1240,10 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); *norm = dev->std; return 0; @@ -1393,8 +1252,7 @@ static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *input) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); unsigned int tmp; static const char *inames[] = { @@ -1407,6 +1265,9 @@ static int vidioc_enum_input(struct file *file, void *priv, [AU0828_VMUX_DEBUG] = "tv debug" }; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + tmp = input->index; if (tmp >= AU0828_MAX_INPUT) @@ -1432,8 +1293,11 @@ static int vidioc_enum_input(struct file *file, void *priv, static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + *i = dev->ctrl_input; return 0; } @@ -1442,6 +1306,9 @@ static void au0828_s_input(struct au0828_dev *dev, int index) { int i; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + switch (AUVI_INPUT(index).type) { case AU0828_VMUX_SVIDEO: dev->input_type = AU0828_VMUX_SVIDEO; @@ -1491,8 +1358,7 @@ static void au0828_s_input(struct au0828_dev *dev, int index) static int vidioc_s_input(struct file *file, void *priv, unsigned int index) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__, index); @@ -1510,6 +1376,8 @@ static int vidioc_enumaudio(struct file *file, void *priv, struct v4l2_audio *a) if (a->index > 1) return -EINVAL; + dprintk(1, "%s called\n", __func__); + if (a->index == 0) strcpy(a->name, "Television"); else @@ -1521,8 +1389,10 @@ static int vidioc_enumaudio(struct file *file, void *priv, struct v4l2_audio *a) static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); a->index = dev->ctrl_ainput; if (a->index == 0) @@ -1536,22 +1406,26 @@ static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); if (a->index != dev->ctrl_ainput) return -EINVAL; + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); return 0; } static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); if (t->index != 0) return -EINVAL; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + strcpy(t->name, "Auvitek tuner"); au0828_init_tuner(dev); @@ -1564,12 +1438,14 @@ static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) static int vidioc_s_tuner(struct file *file, void *priv, const struct v4l2_tuner *t) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); if (t->index != 0) return -EINVAL; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + au0828_init_tuner(dev); i2c_gate_ctrl(dev, 1); v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); @@ -1585,11 +1461,12 @@ static int vidioc_s_tuner(struct file *file, void *priv, static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *freq) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); if (freq->tuner != 0) return -EINVAL; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); freq->frequency = dev->ctrl_freq; return 0; } @@ -1597,13 +1474,15 @@ static int vidioc_g_frequency(struct file *file, void *priv, static int vidioc_s_frequency(struct file *file, void *priv, const struct v4l2_frequency *freq) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); struct v4l2_frequency new_freq = *freq; if (freq->tuner != 0) return -EINVAL; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + au0828_init_tuner(dev); i2c_gate_ctrl(dev, 1); @@ -1625,8 +1504,10 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, struct v4l2_format *format) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); format->fmt.vbi.samples_per_line = dev->vbi_width; format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; @@ -1646,12 +1527,14 @@ static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, static int vidioc_cropcap(struct file *file, void *priv, struct v4l2_cropcap *cc) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); + cc->bounds.left = 0; cc->bounds.top = 0; cc->bounds.width = dev->width; @@ -1665,105 +1548,14 @@ static int vidioc_cropcap(struct file *file, void *priv, return 0; } -static int vidioc_streamon(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc = -EINVAL; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (unlikely(type != fh->type)) - return -EINVAL; - - dprintk(1, "vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n", - fh, type, fh->resources, dev->resources); - - if (unlikely(!res_get(fh, get_ressource(fh)))) - return -EBUSY; - - au0828_init_tuner(dev); - if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - au0828_analog_stream_enable(dev); - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1); - } - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - rc = videobuf_streamon(&fh->vb_vidq); - dev->vid_timeout_running = 1; - mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); - } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - rc = videobuf_streamon(&fh->vb_vbiq); - dev->vbi_timeout_running = 1; - mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); - } - - return rc; -} - -static int vidioc_streamoff(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - int i; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - fh->type != V4L2_BUF_TYPE_VBI_CAPTURE) - return -EINVAL; - if (type != fh->type) - return -EINVAL; - - dprintk(1, "vidioc_streamoff fh=%p t=%d fh->res=%d dev->res=%d\n", - fh, type, fh->resources, dev->resources); - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - dev->vid_timeout_running = 0; - del_timer_sync(&dev->vid_timeout); - - au0828_analog_stream_disable(dev); - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); - rc = au0828_stream_interrupt(dev); - if (rc != 0) - return rc; - - for (i = 0; i < AU0828_MAX_INPUT; i++) { - if (AUVI_INPUT(i).audio_setup == NULL) - continue; - (AUVI_INPUT(i).audio_setup)(dev, 0); - } - - if (res_check(fh, AU0828_RESOURCE_VIDEO)) { - videobuf_streamoff(&fh->vb_vidq); - res_free(fh, AU0828_RESOURCE_VIDEO); - } - } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - dev->vbi_timeout_running = 0; - del_timer_sync(&dev->vbi_timeout); - - if (res_check(fh, AU0828_RESOURCE_VBI)) { - videobuf_streamoff(&fh->vb_vbiq); - res_free(fh, AU0828_RESOURCE_VBI); - } - } - - return 0; -} - #ifdef CONFIG_VIDEO_ADV_DEBUG static int vidioc_g_register(struct file *file, void *priv, struct v4l2_dbg_register *reg) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); reg->val = au0828_read(dev, reg->reg); reg->size = 1; @@ -1773,8 +1565,10 @@ static int vidioc_g_register(struct file *file, void *priv, static int vidioc_s_register(struct file *file, void *priv, const struct v4l2_dbg_register *reg) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = video_drvdata(file); + + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, + dev->std_set_in_tuner_core, dev->dev_state); return au0828_writereg(dev, reg->reg, reg->val); } @@ -1784,93 +1578,13 @@ static int vidioc_log_status(struct file *file, void *fh) { struct video_device *vdev = video_devdata(file); + dprintk(1, "%s called\n", __func__); + v4l2_ctrl_log_status(file, fh); v4l2_device_call_all(vdev->v4l2_dev, 0, core, log_status); return 0; } -static int vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *rb) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_reqbufs(&fh->vb_vidq, rb); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_reqbufs(&fh->vb_vbiq, rb); - - return rc; -} - -static int vidioc_querybuf(struct file *file, void *priv, - struct v4l2_buffer *b) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_querybuf(&fh->vb_vidq, b); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_querybuf(&fh->vb_vbiq, b); - - return rc; -} - -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_qbuf(&fh->vb_vidq, b); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_qbuf(&fh->vb_vbiq, b); - - return rc; -} - -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - /* Workaround for a bug in the au0828 hardware design that sometimes - results in the colorspace being inverted */ - if (dev->greenscreen_detected == 1) { - dprintk(1, "Detected green frame. Resetting stream...\n"); - au0828_analog_stream_reset(dev); - dev->greenscreen_detected = 0; - } - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_dqbuf(&fh->vb_vbiq, b, file->f_flags & O_NONBLOCK); - - return rc; -} - void au0828_v4l2_suspend(struct au0828_dev *dev) { struct urb *urb; @@ -1938,9 +1652,9 @@ static struct v4l2_file_operations au0828_v4l_fops = { .owner = THIS_MODULE, .open = au0828_v4l2_open, .release = au0828_v4l2_close, - .read = au0828_v4l2_read, - .poll = au0828_v4l2_poll, - .mmap = au0828_v4l2_mmap, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, .unlocked_ioctl = video_ioctl2, }; @@ -1957,17 +1671,24 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_g_audio = vidioc_g_audio, .vidioc_s_audio = vidioc_s_audio, .vidioc_cropcap = vidioc_cropcap, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_s_std = vidioc_s_std, .vidioc_g_std = vidioc_g_std, .vidioc_enum_input = vidioc_enum_input, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, + + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, .vidioc_s_tuner = vidioc_s_tuner, .vidioc_g_frequency = vidioc_g_frequency, @@ -1988,6 +1709,42 @@ static const struct video_device au0828_video_template = { .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL_M, }; +static int au0828_vb2_setup(struct au0828_dev *dev) +{ + int rc; + struct vb2_queue *q; + + /* Setup Videobuf2 for Video capture */ + q = &dev->vb_vidq; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->drv_priv = dev; + q->buf_struct_size = sizeof(struct au0828_buffer); + q->ops = &au0828_video_qops; + q->mem_ops = &vb2_vmalloc_memops; + + rc = vb2_queue_init(q); + if (rc < 0) + return rc; + + /* Setup Videobuf2 for VBI capture */ + q = &dev->vb_vbiq; + q->type = V4L2_BUF_TYPE_VBI_CAPTURE; + q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->drv_priv = dev; + q->buf_struct_size = sizeof(struct au0828_buffer); + q->ops = &au0828_vbi_qops; + q->mem_ops = &vb2_vmalloc_memops; + + rc = vb2_queue_init(q); + if (rc < 0) + return rc; + + return 0; +} + /**************************************************************************/ int au0828_analog_register(struct au0828_dev *dev, @@ -2030,7 +1787,6 @@ int au0828_analog_register(struct au0828_dev *dev, } if (!(dev->isoc_in_endpointaddr)) { pr_info("Could not locate isoc endpoint\n"); - kfree(dev); return -ENODEV; } @@ -2039,17 +1795,12 @@ int au0828_analog_register(struct au0828_dev *dev, /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); - INIT_LIST_HEAD(&dev->vidq.queued); INIT_LIST_HEAD(&dev->vbiq.active); - INIT_LIST_HEAD(&dev->vbiq.queued); - - dev->vid_timeout.function = au0828_vid_buffer_timeout; - dev->vid_timeout.data = (unsigned long) dev; - init_timer(&dev->vid_timeout); - dev->vbi_timeout.function = au0828_vbi_buffer_timeout; - dev->vbi_timeout.data = (unsigned long) dev; - init_timer(&dev->vbi_timeout); + setup_timer(&dev->vid_timeout, au0828_vid_buffer_timeout, + (unsigned long)dev); + setup_timer(&dev->vbi_timeout, au0828_vbi_buffer_timeout, + (unsigned long)dev); dev->width = NTSC_STD_W; dev->height = NTSC_STD_H; @@ -2078,18 +1829,34 @@ int au0828_analog_register(struct au0828_dev *dev, goto err_vdev; } + mutex_init(&dev->vb_queue_lock); + mutex_init(&dev->vb_vbi_queue_lock); + /* Fill the video capture device struct */ *dev->vdev = au0828_video_template; dev->vdev->v4l2_dev = &dev->v4l2_dev; dev->vdev->lock = &dev->lock; + dev->vdev->queue = &dev->vb_vidq; + dev->vdev->queue->lock = &dev->vb_queue_lock; strcpy(dev->vdev->name, "au0828a video"); /* Setup the VBI device */ *dev->vbi_dev = au0828_video_template; dev->vbi_dev->v4l2_dev = &dev->v4l2_dev; dev->vbi_dev->lock = &dev->lock; + dev->vbi_dev->queue = &dev->vb_vbiq; + dev->vbi_dev->queue->lock = &dev->vb_vbi_queue_lock; strcpy(dev->vbi_dev->name, "au0828a vbi"); + /* initialize videobuf2 stuff */ + retval = au0828_vb2_setup(dev); + if (retval != 0) { + dprintk(1, "unable to setup videobuf2 queues (error = %d).\n", + retval); + ret = -ENODEV; + goto err_vbi_dev; + } + /* Register the v4l2 device */ video_set_drvdata(dev->vdev, dev); retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1); @@ -2097,7 +1864,7 @@ int au0828_analog_register(struct au0828_dev *dev, dprintk(1, "unable to register video device (error = %d).\n", retval); ret = -ENODEV; - goto err_vbi_dev; + goto err_reg_vdev; } /* Register the vbi device */ @@ -2107,13 +1874,18 @@ int au0828_analog_register(struct au0828_dev *dev, dprintk(1, "unable to register vbi device (error = %d).\n", retval); ret = -ENODEV; - goto err_vbi_dev; + goto err_reg_vbi_dev; } dprintk(1, "%s completed!\n", __func__); return 0; +err_reg_vbi_dev: + video_unregister_device(dev->vdev); +err_reg_vdev: + vb2_queue_release(&dev->vb_vidq); + vb2_queue_release(&dev->vb_vbiq); err_vbi_dev: video_device_release(dev->vbi_dev); err_vdev: diff --git a/drivers/media/usb/au0828/au0828.h b/drivers/media/usb/au0828/au0828.h index 36815a369c68..eb1518742ae6 100644 --- a/drivers/media/usb/au0828/au0828.h +++ b/drivers/media/usb/au0828/au0828.h @@ -28,7 +28,7 @@ /* Analog */ #include <linux/videodev2.h> -#include <media/videobuf-vmalloc.h> +#include <media/videobuf2-vmalloc.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-fh.h> @@ -126,17 +126,7 @@ enum au0828_dev_state { DEV_MISCONFIGURED = 0x04 }; -struct au0828_fh { - /* must be the first field of this struct! */ - struct v4l2_fh fh; - - struct au0828_dev *dev; - unsigned int resources; - - struct videobuf_queue vb_vidq; - struct videobuf_queue vb_vbiq; - enum v4l2_buf_type type; -}; +struct au0828_dev; struct au0828_usb_isoc_ctl { /* max packet size of isoc transaction */ @@ -177,21 +167,20 @@ struct au0828_usb_isoc_ctl { /* buffer for one video frame */ struct au0828_buffer { /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; + struct vb2_buffer vb; + struct list_head list; - struct list_head frame; + void *mem; + unsigned long length; int top_field; - int receiving; + /* pointer to vmalloc memory address in vb */ + char *vb_buf; }; struct au0828_dmaqueue { struct list_head active; - struct list_head queued; - - wait_queue_head_t wq; - /* Counters to control buffer fill */ - int pos; + int pos; }; struct au0828_dev { @@ -220,14 +209,26 @@ struct au0828_dev { struct au0828_rc *ir; #endif - int users; - unsigned int resources; /* resources in use */ struct video_device *vdev; struct video_device *vbi_dev; + + /* Videobuf2 */ + struct vb2_queue vb_vidq; + struct vb2_queue vb_vbiq; + struct mutex vb_queue_lock; + struct mutex vb_vbi_queue_lock; + + unsigned int frame_count; + unsigned int vbi_frame_count; + struct timer_list vid_timeout; int vid_timeout_running; struct timer_list vbi_timeout; int vbi_timeout_running; + + int users; + int streaming_users; + int width; int height; int vbi_width; @@ -242,7 +243,6 @@ struct au0828_dev { __u8 isoc_in_endpointaddr; u8 isoc_init_ok; int greenscreen_detected; - unsigned int frame_count; int ctrl_freq; int input_type; int std_set_in_tuner_core; @@ -277,6 +277,7 @@ struct au0828_dev { char *dig_transfer_buffer[URB_COUNT]; }; + /* ----------------------------------------------------------- */ #define au0828_read(dev, reg) au0828_readreg(dev, reg) #define au0828_write(dev, reg, value) au0828_writereg(dev, reg, value) @@ -309,13 +310,15 @@ extern int au0828_i2c_unregister(struct au0828_dev *dev); /* ----------------------------------------------------------- */ /* au0828-video.c */ -int au0828_analog_register(struct au0828_dev *dev, +extern int au0828_analog_register(struct au0828_dev *dev, struct usb_interface *interface); -int au0828_analog_stream_disable(struct au0828_dev *d); -void au0828_analog_unregister(struct au0828_dev *dev); +extern void au0828_analog_unregister(struct au0828_dev *dev); +extern int au0828_start_analog_streaming(struct vb2_queue *vq, + unsigned int count); +extern void au0828_stop_vbi_streaming(struct vb2_queue *vq); #ifdef CONFIG_VIDEO_AU0828_V4L2 -void au0828_v4l2_suspend(struct au0828_dev *dev); -void au0828_v4l2_resume(struct au0828_dev *dev); +extern void au0828_v4l2_suspend(struct au0828_dev *dev); +extern void au0828_v4l2_resume(struct au0828_dev *dev); #else static inline void au0828_v4l2_suspend(struct au0828_dev *dev) { }; static inline void au0828_v4l2_resume(struct au0828_dev *dev) { }; @@ -329,7 +332,7 @@ void au0828_dvb_suspend(struct au0828_dev *dev); void au0828_dvb_resume(struct au0828_dev *dev); /* au0828-vbi.c */ -extern struct videobuf_queue_ops au0828_vbi_qops; +extern struct vb2_ops au0828_vbi_qops; #define dprintk(level, fmt, arg...)\ do { if (au0828_debug & level)\ diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index ae05d591f228..da03733690bd 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1403,7 +1403,6 @@ static int cx231xx_usb_probe(struct usb_interface *interface, struct usb_interface_assoc_descriptor *assoc_desc; ifnum = interface->altsetting[0].desc.bInterfaceNumber; - udev = usb_get_dev(interface_to_usbdev(interface)); /* * Interface number 0 - IR interface (handled by mceusb driver) @@ -1424,11 +1423,13 @@ static int cx231xx_usb_probe(struct usb_interface *interface, } } while (test_and_set_bit(nr, &cx231xx_devused)); + udev = usb_get_dev(interface_to_usbdev(interface)); + /* allocate memory for our device state and initialize it */ dev = devm_kzalloc(&udev->dev, sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - clear_bit(nr, &cx231xx_devused); - return -ENOMEM; + retval = -ENOMEM; + goto err_if; } snprintf(dev->name, 29, "cx231xx #%d", nr); @@ -1582,7 +1583,7 @@ err_v4l2: usb_set_intfdata(interface, NULL); err_if: usb_put_dev(udev); - clear_bit(dev->devno, &cx231xx_devused); + clear_bit(nr, &cx231xx_devused); return retval; } diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c index 53ca12c1ff69..ecea76fe07f6 100644 --- a/drivers/media/usb/cx231xx/cx231xx-video.c +++ b/drivers/media/usb/cx231xx/cx231xx-video.c @@ -2062,7 +2062,6 @@ static struct video_device *cx231xx_vdev_init(struct cx231xx *dev, *vfd = *template; vfd->v4l2_dev = &dev->v4l2_dev; vfd->release = video_device_release; - vfd->debug = video_debug; vfd->lock = &dev->lock; snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h index f9e262eb0db9..6d6f3ee812f6 100644 --- a/drivers/media/usb/cx231xx/cx231xx.h +++ b/drivers/media/usb/cx231xx/cx231xx.h @@ -532,15 +532,7 @@ struct cx231xx_video_mode { unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ u16 end_point_addr; }; -/* -struct cx23885_dmaqueue { - struct list_head active; - struct list_head queued; - struct timer_list timeout; - struct btcx_riscmem stopper; - u32 count; -}; -*/ + struct cx231xx_tsport { struct cx231xx *dev; diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h index 14e111e13e54..41c6363dff08 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h @@ -354,6 +354,7 @@ struct dvb_usb_adapter { * @name: device name * @rc_map: name of rc codes table * @rc_polling_active: set when RC polling is active + * @intf: pointer to the device's struct usb_interface * @udev: pointer to the device's struct usb_device * @rc: remote controller configuration * @powered: indicated whether the device is power or not @@ -370,6 +371,7 @@ struct dvb_usb_device { const char *name; const char *rc_map; bool rc_polling_active; + struct usb_interface *intf; struct usb_device *udev; struct dvb_usb_rc rc; int powered; diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index 1950f37df835..9913e0f59485 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -868,6 +868,7 @@ int dvb_usbv2_probe(struct usb_interface *intf, goto err; } + d->intf = intf; d->name = driver_info->name; d->rc_map = driver_info->rc_map; d->udev = udev; diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index 994de53a574b..5de6f7c04d09 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -126,9 +126,9 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct lme2510_state { unsigned long int_urb_due; + fe_status_t lock_status; u8 id; u8 tuner_config; - u8 signal_lock; u8 signal_level; u8 signal_sn; u8 time_key; @@ -143,6 +143,12 @@ struct lme2510_state { void *buffer; struct urb *lme_urb; void *usb_buffer; + /* Frontend original calls */ + int (*fe_read_status)(struct dvb_frontend *, fe_status_t *); + int (*fe_read_signal_strength)(struct dvb_frontend *, u16 *); + int (*fe_read_snr)(struct dvb_frontend *, u16 *); + int (*fe_read_ber)(struct dvb_frontend *, u32 *); + int (*fe_read_ucblocks)(struct dvb_frontend *, u32 *); int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t); u8 dvb_usb_lme2510_firmware; }; @@ -258,6 +264,7 @@ static void lme2510_int_response(struct urb *lme_urb) static u8 *ibuf, *rbuf; int i = 0, offset; u32 key; + u8 signal_lock = 0; switch (lme_urb->status) { case 0: @@ -298,8 +305,7 @@ static void lme2510_int_response(struct urb *lme_urb) case 0xbb: switch (st->tuner_config) { case TUNER_LG: - if (ibuf[2] > 0) - st->signal_lock = ibuf[2]; + signal_lock = ibuf[2] & BIT(5); st->signal_level = ibuf[4]; st->signal_sn = ibuf[3]; st->time_key = ibuf[7]; @@ -308,29 +314,29 @@ static void lme2510_int_response(struct urb *lme_urb) case TUNER_S0194: /* Tweak for earlier firmware*/ if (ibuf[1] == 0x03) { - if (ibuf[2] > 1) - st->signal_lock = ibuf[2]; + signal_lock = ibuf[2] & BIT(4); st->signal_level = ibuf[3]; st->signal_sn = ibuf[4]; } else { st->signal_level = ibuf[4]; st->signal_sn = ibuf[5]; - st->signal_lock = - (st->signal_lock & 0xf7) + - ((ibuf[2] & 0x01) << 0x03); } break; case TUNER_RS2000: - if (ibuf[2] & 0x1) - st->signal_lock = 0xff; - else - st->signal_lock = 0x00; + signal_lock = ibuf[2] & 0xee; st->signal_level = ibuf[5]; st->signal_sn = ibuf[4]; st->time_key = ibuf[7]; default: break; } + + /* Interrupt will also throw just BIT 0 as lock */ + signal_lock |= ibuf[2] & BIT(0); + + if (!signal_lock) + st->lock_status &= ~FE_HAS_LOCK; + debug_data_snipet(5, "INT Remote data snipet in", ibuf); break; case 0xcc: @@ -344,15 +350,17 @@ static void lme2510_int_response(struct urb *lme_urb) usb_submit_urb(lme_urb, GFP_ATOMIC); - /* interrupt urb is due every 48 msecs while streaming - * add 12msecs for system lag */ - st->int_urb_due = jiffies + msecs_to_jiffies(60); + /* Interrupt urb is due every 48 msecs while streaming the buffer + * stores up to 4 periods if missed. Allow 200 msec for next interrupt. + */ + st->int_urb_due = jiffies + msecs_to_jiffies(200); } static int lme2510_int_read(struct dvb_usb_adapter *adap) { struct dvb_usb_device *d = adap_to_d(adap); struct lme2510_state *lme_int = adap_to_priv(adap); + struct usb_host_endpoint *ep; lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC); @@ -374,6 +382,12 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap) adap, 8); + /* Quirk of pipe reporting PIPE_BULK but behaves as interrupt */ + ep = usb_pipe_endpoint(d->udev, lme_int->lme_urb->pipe); + + if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK) + lme_int->lme_urb->pipe = usb_rcvbulkpipe(d->udev, 0xa), + lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC); @@ -449,170 +463,13 @@ static int lme2510_return_status(struct dvb_usb_device *d) static int lme2510_msg(struct dvb_usb_device *d, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { - int ret = 0; struct lme2510_state *st = d->priv; - if (st->i2c_talk_onoff == 1) { - - ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - - switch (st->tuner_config) { - case TUNER_LG: - if (wbuf[2] == 0x1c) { - if (wbuf[3] == 0x0e) { - st->signal_lock = rbuf[1]; - if ((st->stream_on & 1) && - (st->signal_lock & 0x10)) { - lme2510_stream_restart(d); - st->i2c_talk_onoff = 0; - } - msleep(80); - } - } - break; - case TUNER_S7395: - if (wbuf[2] == 0xd0) { - if (wbuf[3] == 0x24) { - st->signal_lock = rbuf[1]; - if ((st->stream_on & 1) && - (st->signal_lock & 0x8)) { - lme2510_stream_restart(d); - st->i2c_talk_onoff = 0; - } - } - } - break; - case TUNER_S0194: - if (wbuf[2] == 0xd0) { - if (wbuf[3] == 0x1b) { - st->signal_lock = rbuf[1]; - if ((st->stream_on & 1) && - (st->signal_lock & 0x8)) { - lme2510_stream_restart(d); - st->i2c_talk_onoff = 0; - } - } - } - break; - case TUNER_RS2000: - default: - break; - } - } else { - /* TODO rewrite this section */ - switch (st->tuner_config) { - case TUNER_LG: - switch (wbuf[3]) { - case 0x0e: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - break; - case 0x43: - rbuf[0] = 0x55; - rbuf[1] = st->signal_level; - break; - case 0x1c: - rbuf[0] = 0x55; - rbuf[1] = st->signal_sn; - break; - case 0x15: - case 0x16: - case 0x17: - case 0x18: - rbuf[0] = 0x55; - rbuf[1] = 0x00; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - break; - case TUNER_S7395: - switch (wbuf[3]) { - case 0x10: - rbuf[0] = 0x55; - rbuf[1] = (st->signal_level & 0x80) - ? 0 : (st->signal_level * 2); - break; - case 0x2d: - rbuf[0] = 0x55; - rbuf[1] = st->signal_sn; - break; - case 0x24: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - break; - case 0x2e: - case 0x26: - case 0x27: - rbuf[0] = 0x55; - rbuf[1] = 0x00; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - break; - case TUNER_S0194: - switch (wbuf[3]) { - case 0x18: - rbuf[0] = 0x55; - rbuf[1] = (st->signal_level & 0x80) - ? 0 : (st->signal_level * 2); - break; - case 0x24: - rbuf[0] = 0x55; - rbuf[1] = st->signal_sn; - break; - case 0x1b: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - break; - case 0x19: - case 0x25: - case 0x1e: - case 0x1d: - rbuf[0] = 0x55; - rbuf[1] = 0x00; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - break; - case TUNER_RS2000: - switch (wbuf[3]) { - case 0x8c: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - - /* If int_urb_due overdue - * set rbuf[1] to 0 to clear lock */ - if (time_after(jiffies, st->int_urb_due)) - rbuf[1] = 0; - - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - default: - break; - } - - deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)", - wbuf[3], rbuf[1]); - - } + st->i2c_talk_onoff = 1; - return ret; + return lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); } - static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { @@ -935,26 +792,8 @@ static struct stv0299_config sharp_z0194_config = { .set_symbol_rate = sharp_z0194a_set_symbol_rate, }; -static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe, - int caller) -{ - struct dvb_usb_adapter *adap = fe_to_adap(fe); - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = d->priv; - - mutex_lock(&d->i2c_mutex); - if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) { - st->i2c_talk_onoff = 0; - lme2510_stream_restart(d); - } - mutex_unlock(&d->i2c_mutex); - - return 0; -} - static struct m88rs2000_config m88rs2000_config = { - .demod_addr = 0x68, - .set_ts_params = dm04_rs2000_set_ts_param, + .demod_addr = 0x68 }; static struct ts2020_config ts2020_config = { @@ -998,27 +837,101 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, return (ret < 0) ? -ENODEV : 0; } -static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe, - u16 *strength) +static int dm04_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct dvb_usb_device *d = fe_to_d(fe); + struct lme2510_state *st = d->priv; + int ret = 0; + + if (st->i2c_talk_onoff) { + if (st->fe_read_status) { + ret = st->fe_read_status(fe, status); + if (ret < 0) + return ret; + } + + st->lock_status = *status; + + if (*status & FE_HAS_LOCK && st->stream_on) { + mutex_lock(&d->i2c_mutex); + + st->i2c_talk_onoff = 0; + ret = lme2510_stream_restart(d); + + mutex_unlock(&d->i2c_mutex); + } + + return ret; + } + + /* Timeout of interrupt reached on RS2000 */ + if (st->tuner_config == TUNER_RS2000 && + time_after(jiffies, st->int_urb_due)) + st->lock_status &= ~FE_HAS_LOCK; + + *status = st->lock_status; + + if (!(*status & FE_HAS_LOCK)) + st->i2c_talk_onoff = 1; + + return ret; +} + +static int dm04_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct lme2510_state *st = fe_to_priv(fe); - *strength = (u16)((u32)st->signal_level * 0xffff / 0xff); + if (st->fe_read_signal_strength && !st->stream_on) + return st->fe_read_signal_strength(fe, strength); + + switch (st->tuner_config) { + case TUNER_LG: + *strength = 0xff - st->signal_level; + *strength |= *strength << 8; + break; + /* fall through */ + case TUNER_S7395: + case TUNER_S0194: + *strength = 0xffff - (((st->signal_level * 2) << 8) * 5 / 4); + break; + case TUNER_RS2000: + *strength = (u16)((u32)st->signal_level * 0xffff / 0xff); + } return 0; } -static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) +static int dm04_read_snr(struct dvb_frontend *fe, u16 *snr) { struct lme2510_state *st = fe_to_priv(fe); - *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f); + if (st->fe_read_snr && !st->stream_on) + return st->fe_read_snr(fe, snr); + + switch (st->tuner_config) { + case TUNER_LG: + *snr = 0xff - st->signal_sn; + *snr |= *snr << 8; + break; + /* fall through */ + case TUNER_S7395: + case TUNER_S0194: + *snr = (u16)((0xff - st->signal_sn - 0xa1) * 3) << 8; + break; + case TUNER_RS2000: + *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f); + } return 0; } static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber) { + struct lme2510_state *st = fe_to_priv(fe); + + if (st->fe_read_ber && !st->stream_on) + return st->fe_read_ber(fe, ber); + *ber = 0; return 0; @@ -1026,6 +939,11 @@ static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber) static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { + struct lme2510_state *st = fe_to_priv(fe); + + if (st->fe_read_ucblocks && !st->stream_on) + return st->fe_read_ucblocks(fe, ucblocks); + *ucblocks = 0; return 0; @@ -1119,15 +1037,6 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) st->tuner_config = TUNER_RS2000; st->fe_set_voltage = adap->fe[0]->ops.set_voltage; - - adap->fe[0]->ops.read_signal_strength = - dm04_rs2000_read_signal_strength; - adap->fe[0]->ops.read_snr = - dm04_rs2000_read_snr; - adap->fe[0]->ops.read_ber = - dm04_read_ber; - adap->fe[0]->ops.read_ucblocks = - dm04_read_ucblocks; } break; } @@ -1146,7 +1055,19 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) return -ENODEV; } + st->fe_read_status = adap->fe[0]->ops.read_status; + st->fe_read_signal_strength = adap->fe[0]->ops.read_signal_strength; + st->fe_read_snr = adap->fe[0]->ops.read_snr; + st->fe_read_ber = adap->fe[0]->ops.read_ber; + st->fe_read_ucblocks = adap->fe[0]->ops.read_ucblocks; + + adap->fe[0]->ops.read_status = dm04_read_status; + adap->fe[0]->ops.read_signal_strength = dm04_read_signal_strength; + adap->fe[0]->ops.read_snr = dm04_read_snr; + adap->fe[0]->ops.read_ber = dm04_read_ber; + adap->fe[0]->ops.read_ucblocks = dm04_read_ucblocks; adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage; + ret = lme_name(adap); return ret; } @@ -1288,7 +1209,6 @@ static void *lme2510_exit_int(struct dvb_usb_device *d) if (st->usb_buffer != NULL) { st->i2c_talk_onoff = 1; - st->signal_lock = 0; st->signal_level = 0; st->signal_sn = 0; buffer = st->usb_buffer; diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c index 0a98d04c53e4..ecefa5c477fa 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c @@ -604,9 +604,3 @@ MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver"); MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h index 2d4530f5be54..0bd83e52669c 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h @@ -47,9 +47,3 @@ struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state, #endif /* CONFIG_DVB_USB_MXL111SF */ #endif /* __MXL111SF_DEMOD_H__ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c index a619410adde4..2180c13a6dcc 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c @@ -755,9 +755,3 @@ int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode) } return 0; } - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h index b85a5772d771..16fa4d4daf88 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h @@ -48,9 +48,3 @@ int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state, enum mxl111sf_mux_config pin_mux_config); #endif /* _DVB_USB_MXL111SF_GPIO_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c index a101d06eb143..283495c84ba3 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c @@ -842,9 +842,3 @@ int mxl111sf_i2c_xfer(struct i2c_adapter *adap, return i == num ? num : -EREMOTEIO; } - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h index 465762145ad2..c486fe02f018 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h @@ -27,9 +27,3 @@ int mxl111sf_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num); #endif /* _DVB_USB_MXL111SF_I2C_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c index f6b348024bec..5b0191178f9f 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c @@ -335,9 +335,3 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, return ret; } - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h index 0643738de7de..25aa4a1ea755 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h @@ -45,9 +45,3 @@ int mxl111sf_idac_config(struct mxl111sf_state *state, u8 current_value, u8 hysteresis_value); #endif /* _DVB_USB_MXL111SF_PHY_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h index 89bf115e927e..1f4bfbcdbabb 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h @@ -171,9 +171,3 @@ #define V6_DIG_RF_PWR_MSB_REG 0x47 #endif /* _DVB_USB_MXL111SF_REG_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c index a8d2c7053674..444579be0b77 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c @@ -515,11 +515,3 @@ MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver"); MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h index 2046db22519e..e6caab21a197 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h @@ -77,12 +77,3 @@ struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, #endif #endif /* __MXL111SF_TUNER_H__ */ - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ - diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index c3447eaf1104..bec12b0e076b 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -1425,9 +1425,3 @@ MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF"); MODULE_VERSION("1.0"); MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h index 8516c011b7cc..ee70df1f1e94 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h @@ -152,9 +152,3 @@ extern int dvb_usb_mxl111sf_debug; }) #endif /* _DVB_USB_MXL111SF_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 896a225ee011..77dcfdf547ac 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -22,42 +22,6 @@ #include "rtl28xxu.h" -#include "rtl2830.h" -#include "rtl2832.h" -#include "rtl2832_sdr.h" -#include "mn88472.h" -#include "mn88473.h" - -#include "qt1010.h" -#include "mt2060.h" -#include "mxl5005s.h" -#include "fc0012.h" -#include "fc0013.h" -#include "e4000.h" -#include "fc2580.h" -#include "tua9001.h" -#include "r820t.h" - - -#ifdef CONFIG_MEDIA_ATTACH -#define dvb_attach_sdr(FUNCTION, ARGS...) ({ \ - void *__r = NULL; \ - typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ - if (__a) { \ - __r = (void *) __a(ARGS); \ - if (__r == NULL) \ - symbol_put(FUNCTION); \ - } \ - __r; \ -}) - -#else -#define dvb_attach_sdr(FUNCTION, ARGS...) ({ \ - FUNCTION(ARGS); \ -}) - -#endif - static int rtl28xxu_disable_rc; module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644); MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller"); @@ -65,20 +29,14 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) { + struct rtl28xxu_dev *dev = d->priv; int ret; unsigned int pipe; u8 requesttype; - u8 *buf; - - buf = kmalloc(req->size, GFP_KERNEL); - if (!buf) { - ret = -ENOMEM; - goto err; - } if (req->index & CMD_WR_FLAG) { /* write */ - memcpy(buf, req->data, req->size); + memcpy(dev->buf, req->data, req->size); requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); pipe = usb_sndctrlpipe(d->udev, 0); } else { @@ -88,30 +46,23 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) } ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, - req->index, buf, req->size, 1000); - + req->index, dev->buf, req->size, 1000); dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value, - req->index, buf, req->size); - - if (ret > 0) - ret = 0; + req->index, dev->buf, req->size); + if (ret < 0) + goto err; /* read request, copy returned data to return buf */ - if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) - memcpy(req->data, buf, req->size); + if (requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) + memcpy(req->data, dev->buf, req->size); - kfree(buf); - - if (ret) - goto err; - - return ret; + return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } -static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +static int rtl28xxu_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) { struct rtl28xxu_req req; @@ -129,7 +80,7 @@ static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) return rtl28xxu_ctrl_msg(d, &req); } -static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) +static int rtl28xxu_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) { struct rtl28xxu_req req; @@ -147,17 +98,17 @@ static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) return rtl28xxu_ctrl_msg(d, &req); } -static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) +static int rtl28xxu_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) { - return rtl28xx_wr_regs(d, reg, &val, 1); + return rtl28xxu_wr_regs(d, reg, &val, 1); } -static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +static int rtl28xxu_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) { - return rtl2831_rd_regs(d, reg, val, 1); + return rtl28xxu_rd_regs(d, reg, val, 1); } -static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, +static int rtl28xxu_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, u8 mask) { int ret; @@ -165,7 +116,7 @@ static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, /* no need for read if whole reg is written */ if (mask != 0xff) { - ret = rtl28xx_rd_reg(d, reg, &tmp); + ret = rtl28xxu_rd_reg(d, reg, &tmp); if (ret) return ret; @@ -174,7 +125,7 @@ static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, val |= tmp; } - return rtl28xx_wr_reg(d, reg, val); + return rtl28xxu_wr_reg(d, reg, val); } /* I2C */ @@ -183,7 +134,7 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], { int ret; struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct rtl28xxu_priv *priv = d->priv; + struct rtl28xxu_dev *dev = d->priv; struct rtl28xxu_req req; /* @@ -220,7 +171,7 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], } else if (msg[0].addr == 0x10) { /* method 1 - integrated demod */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); - req.index = CMD_DEMOD_RD | priv->page; + req.index = CMD_DEMOD_RD | dev->page; req.size = msg[1].len; req.data = &msg[1].buf[0]; ret = rtl28xxu_ctrl_msg(d, &req); @@ -256,12 +207,12 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], /* method 1 - integrated demod */ if (msg[0].buf[0] == 0x00) { /* save demod page for later demod access */ - priv->page = msg[0].buf[1]; + dev->page = msg[0].buf[1]; ret = 0; } else { req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); - req.index = CMD_DEMOD_WR | priv->page; + req.index = CMD_DEMOD_WR | dev->page; req.size = msg[0].len-1; req.data = &msg[0].buf[1]; ret = rtl28xxu_ctrl_msg(d, &req); @@ -303,7 +254,7 @@ static struct i2c_algorithm rtl28xxu_i2c_algo = { static int rtl2831u_read_config(struct dvb_usb_device *d) { - struct rtl28xxu_priv *priv = d_to_priv(d); + struct rtl28xxu_dev *dev = d_to_priv(d); int ret; u8 buf[1]; /* open RTL2831U/RTL2830 I2C gate */ @@ -312,7 +263,7 @@ static int rtl2831u_read_config(struct dvb_usb_device *d) struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf}; - dev_dbg(&d->udev->dev, "%s:\n", __func__); + dev_dbg(&d->intf->dev, "\n"); /* * RTL2831U GPIOs @@ -323,12 +274,12 @@ static int rtl2831u_read_config(struct dvb_usb_device *d) */ /* GPIO direction */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_DIR, 0x0a); if (ret) goto err; /* enable as output GPIO0, GPIO2, GPIO4 */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); if (ret) goto err; @@ -340,7 +291,7 @@ static int rtl2831u_read_config(struct dvb_usb_device *d) /* demod needs some time to wake up */ msleep(20); - priv->tuner_name = "NONE"; + dev->tuner_name = "NONE"; /* open demod I2C gate */ ret = rtl28xxu_ctrl_msg(d, &req_gate_open); @@ -350,8 +301,8 @@ static int rtl2831u_read_config(struct dvb_usb_device *d) /* check QT1010 ID(?) register; reg=0f val=2c */ ret = rtl28xxu_ctrl_msg(d, &req_qt1010); if (ret == 0 && buf[0] == 0x2c) { - priv->tuner = TUNER_RTL2830_QT1010; - priv->tuner_name = "QT1010"; + dev->tuner = TUNER_RTL2830_QT1010; + dev->tuner_name = "QT1010"; goto found; } @@ -363,28 +314,28 @@ static int rtl2831u_read_config(struct dvb_usb_device *d) /* check MT2060 ID register; reg=00 val=63 */ ret = rtl28xxu_ctrl_msg(d, &req_mt2060); if (ret == 0 && buf[0] == 0x63) { - priv->tuner = TUNER_RTL2830_MT2060; - priv->tuner_name = "MT2060"; + dev->tuner = TUNER_RTL2830_MT2060; + dev->tuner_name = "MT2060"; goto found; } /* assume MXL5005S */ - priv->tuner = TUNER_RTL2830_MXL5005S; - priv->tuner_name = "MXL5005S"; + dev->tuner = TUNER_RTL2830_MXL5005S; + dev->tuner_name = "MXL5005S"; goto found; found: - dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); + dev_dbg(&d->intf->dev, "tuner=%s\n", dev->tuner_name); return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } static int rtl2832u_read_config(struct dvb_usb_device *d) { - struct rtl28xxu_priv *priv = d_to_priv(d); + struct rtl28xxu_dev *dev = d_to_priv(d); int ret; u8 buf[2]; /* open RTL2832U/RTL2832 I2C gate */ @@ -407,14 +358,14 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) struct rtl28xxu_req req_mn88472 = {0xff38, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_mn88473 = {0xff38, CMD_I2C_RD, 1, buf}; - dev_dbg(&d->udev->dev, "%s:\n", __func__); + dev_dbg(&d->intf->dev, "\n"); /* enable GPIO3 and GPIO6 as output */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48); if (ret) goto err; @@ -428,134 +379,134 @@ static int rtl2832u_read_config(struct dvb_usb_device *d) if (ret) goto err; - priv->tuner_name = "NONE"; + dev->tuner_name = "NONE"; /* check FC0012 ID register; reg=00 val=a1 */ ret = rtl28xxu_ctrl_msg(d, &req_fc0012); if (ret == 0 && buf[0] == 0xa1) { - priv->tuner = TUNER_RTL2832_FC0012; - priv->tuner_name = "FC0012"; + dev->tuner = TUNER_RTL2832_FC0012; + dev->tuner_name = "FC0012"; goto tuner_found; } /* check FC0013 ID register; reg=00 val=a3 */ ret = rtl28xxu_ctrl_msg(d, &req_fc0013); if (ret == 0 && buf[0] == 0xa3) { - priv->tuner = TUNER_RTL2832_FC0013; - priv->tuner_name = "FC0013"; + dev->tuner = TUNER_RTL2832_FC0013; + dev->tuner_name = "FC0013"; goto tuner_found; } /* check MT2266 ID register; reg=00 val=85 */ ret = rtl28xxu_ctrl_msg(d, &req_mt2266); if (ret == 0 && buf[0] == 0x85) { - priv->tuner = TUNER_RTL2832_MT2266; - priv->tuner_name = "MT2266"; + dev->tuner = TUNER_RTL2832_MT2266; + dev->tuner_name = "MT2266"; goto tuner_found; } /* check FC2580 ID register; reg=01 val=56 */ ret = rtl28xxu_ctrl_msg(d, &req_fc2580); if (ret == 0 && buf[0] == 0x56) { - priv->tuner = TUNER_RTL2832_FC2580; - priv->tuner_name = "FC2580"; + dev->tuner = TUNER_RTL2832_FC2580; + dev->tuner_name = "FC2580"; goto tuner_found; } /* check MT2063 ID register; reg=00 val=9e || 9c */ ret = rtl28xxu_ctrl_msg(d, &req_mt2063); if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) { - priv->tuner = TUNER_RTL2832_MT2063; - priv->tuner_name = "MT2063"; + dev->tuner = TUNER_RTL2832_MT2063; + dev->tuner_name = "MT2063"; goto tuner_found; } /* check MAX3543 ID register; reg=00 val=38 */ ret = rtl28xxu_ctrl_msg(d, &req_max3543); if (ret == 0 && buf[0] == 0x38) { - priv->tuner = TUNER_RTL2832_MAX3543; - priv->tuner_name = "MAX3543"; + dev->tuner = TUNER_RTL2832_MAX3543; + dev->tuner_name = "MAX3543"; goto tuner_found; } /* check TUA9001 ID register; reg=7e val=2328 */ ret = rtl28xxu_ctrl_msg(d, &req_tua9001); if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) { - priv->tuner = TUNER_RTL2832_TUA9001; - priv->tuner_name = "TUA9001"; + dev->tuner = TUNER_RTL2832_TUA9001; + dev->tuner_name = "TUA9001"; goto tuner_found; } /* check MXL5007R ID register; reg=d9 val=14 */ ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t); if (ret == 0 && buf[0] == 0x14) { - priv->tuner = TUNER_RTL2832_MXL5007T; - priv->tuner_name = "MXL5007T"; + dev->tuner = TUNER_RTL2832_MXL5007T; + dev->tuner_name = "MXL5007T"; goto tuner_found; } /* check E4000 ID register; reg=02 val=40 */ ret = rtl28xxu_ctrl_msg(d, &req_e4000); if (ret == 0 && buf[0] == 0x40) { - priv->tuner = TUNER_RTL2832_E4000; - priv->tuner_name = "E4000"; + dev->tuner = TUNER_RTL2832_E4000; + dev->tuner_name = "E4000"; goto tuner_found; } /* check TDA18272 ID register; reg=00 val=c760 */ ret = rtl28xxu_ctrl_msg(d, &req_tda18272); if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) { - priv->tuner = TUNER_RTL2832_TDA18272; - priv->tuner_name = "TDA18272"; + dev->tuner = TUNER_RTL2832_TDA18272; + dev->tuner_name = "TDA18272"; goto tuner_found; } /* check R820T ID register; reg=00 val=69 */ ret = rtl28xxu_ctrl_msg(d, &req_r820t); if (ret == 0 && buf[0] == 0x69) { - priv->tuner = TUNER_RTL2832_R820T; - priv->tuner_name = "R820T"; + dev->tuner = TUNER_RTL2832_R820T; + dev->tuner_name = "R820T"; goto tuner_found; } /* check R828D ID register; reg=00 val=69 */ ret = rtl28xxu_ctrl_msg(d, &req_r828d); if (ret == 0 && buf[0] == 0x69) { - priv->tuner = TUNER_RTL2832_R828D; - priv->tuner_name = "R828D"; + dev->tuner = TUNER_RTL2832_R828D; + dev->tuner_name = "R828D"; goto tuner_found; } tuner_found: - dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); + dev_dbg(&d->intf->dev, "tuner=%s\n", dev->tuner_name); /* probe slave demod */ - if (priv->tuner == TUNER_RTL2832_R828D) { + if (dev->tuner == TUNER_RTL2832_R828D) { /* power on MN88472 demod on GPIO0 */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01); if (ret) goto err; /* check MN88472 answers */ ret = rtl28xxu_ctrl_msg(d, &req_mn88472); if (ret == 0 && buf[0] == 0x02) { - dev_dbg(&d->udev->dev, "%s: MN88472 found\n", __func__); - priv->slave_demod = SLAVE_DEMOD_MN88472; + dev_dbg(&d->intf->dev, "MN88472 found\n"); + dev->slave_demod = SLAVE_DEMOD_MN88472; goto demod_found; } ret = rtl28xxu_ctrl_msg(d, &req_mn88473); if (ret == 0 && buf[0] == 0x03) { - dev_dbg(&d->udev->dev, "%s: MN88473 found\n", __func__); - priv->slave_demod = SLAVE_DEMOD_MN88473; + dev_dbg(&d->intf->dev, "MN88473 found\n"); + dev->slave_demod = SLAVE_DEMOD_MN88473; goto demod_found; } } @@ -568,14 +519,51 @@ demod_found: return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } -static const struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, +static int rtl28xxu_read_config(struct dvb_usb_device *d) +{ + struct rtl28xxu_dev *dev = d_to_priv(d); + + if (dev->chip_id == CHIP_ID_RTL2831U) + return rtl2831u_read_config(d); + else + return rtl2832u_read_config(d); +} + +static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name) +{ + struct rtl28xxu_dev *dev = d_to_priv(d); + int ret; + struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL}; + + dev_dbg(&d->intf->dev, "\n"); + + /* + * Detect chip type using I2C command that is not supported + * by old RTL2831U. + */ + ret = rtl28xxu_ctrl_msg(d, &req_demod_i2c); + if (ret == -EPIPE) { + dev->chip_id = CHIP_ID_RTL2831U; + } else if (ret == 0) { + dev->chip_id = CHIP_ID_RTL2832U; + } else { + dev_err(&d->intf->dev, "chip type detection failed %d\n", ret); + goto err; + } + dev_dbg(&d->intf->dev, "chip_id=%u\n", dev->chip_id); + + return WARM; +err: + dev_dbg(&d->intf->dev, "failed=%d\n", ret); + return ret; +} + +static const struct rtl2830_platform_data rtl2830_mt2060_platform_data = { + .clk = 28800000, .spec_inv = 1, .vtop = 0x20, .krf = 0x04, @@ -583,20 +571,16 @@ static const struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { }; -static const struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, +static const struct rtl2830_platform_data rtl2830_qt1010_platform_data = { + .clk = 28800000, .spec_inv = 1, .vtop = 0x20, .krf = 0x04, .agc_targ_val = 0x2d, }; -static const struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, +static const struct rtl2830_platform_data rtl2830_mxl5005s_platform_data = { + .clk = 28800000, .spec_inv = 0, .vtop = 0x3f, .krf = 0x04, @@ -606,69 +590,81 @@ static const struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) { struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - const struct rtl2830_config *rtl2830_config; + struct rtl28xxu_dev *dev = d_to_priv(d); + struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data; + struct i2c_board_info board_info; + struct i2c_client *client; int ret; - dev_dbg(&d->udev->dev, "%s:\n", __func__); + dev_dbg(&d->intf->dev, "\n"); - switch (priv->tuner) { + switch (dev->tuner) { case TUNER_RTL2830_QT1010: - rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; + *pdata = rtl2830_qt1010_platform_data; break; case TUNER_RTL2830_MT2060: - rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; + *pdata = rtl2830_mt2060_platform_data; break; case TUNER_RTL2830_MXL5005S: - rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; + *pdata = rtl2830_mxl5005s_platform_data; break; default: - dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", - KBUILD_MODNAME, priv->tuner_name); + dev_err(&d->intf->dev, "unknown tuner %s\n", dev->tuner_name); ret = -ENODEV; goto err; } /* attach demodulator */ - adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, &d->i2c_adap); - if (!adap->fe[0]) { + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "rtl2830", I2C_NAME_SIZE); + board_info.addr = 0x10; + board_info.platform_data = pdata; + request_module("%s", board_info.type); + client = i2c_new_device(&d->i2c_adap, &board_info); + if (client == NULL || client->dev.driver == NULL) { + ret = -ENODEV; + goto err; + } + + if (!try_module_get(client->dev.driver->owner)) { + i2c_unregister_device(client); ret = -ENODEV; goto err; } + adap->fe[0] = pdata->get_dvb_frontend(client); + dev->demod_i2c_adapter = pdata->get_i2c_adapter(client); + + dev->i2c_client_demod = client; + return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } -static const struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, +static const struct rtl2832_platform_data rtl2832_fc0012_platform_data = { + .clk = 28800000, .tuner = TUNER_RTL2832_FC0012 }; -static const struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, +static const struct rtl2832_platform_data rtl2832_fc0013_platform_data = { + .clk = 28800000, .tuner = TUNER_RTL2832_FC0013 }; -static const struct rtl2832_config rtl28xxu_rtl2832_tua9001_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, +static const struct rtl2832_platform_data rtl2832_tua9001_platform_data = { + .clk = 28800000, .tuner = TUNER_RTL2832_TUA9001, }; -static const struct rtl2832_config rtl28xxu_rtl2832_e4000_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, +static const struct rtl2832_platform_data rtl2832_e4000_platform_data = { + .clk = 28800000, .tuner = TUNER_RTL2832_E4000, }; -static const struct rtl2832_config rtl28xxu_rtl2832_r820t_config = { - .i2c_addr = 0x10, - .xtal = 28800000, +static const struct rtl2832_platform_data rtl2832_r820t_platform_data = { + .clk = 28800000, .tuner = TUNER_RTL2832_R820T, }; @@ -678,12 +674,12 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, int ret; u8 val; - dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); + dev_dbg(&d->intf->dev, "cmd=%d arg=%d\n", cmd, arg); switch (cmd) { case FC_FE_CALLBACK_VHF_ENABLE: /* set output values */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val); + ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &val); if (ret) goto err; @@ -693,7 +689,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, val |= 0x40; /* set GPIO6 high */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, val); if (ret) goto err; break; @@ -703,7 +699,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, } return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } @@ -713,7 +709,7 @@ static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, int ret; u8 val; - dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); + dev_dbg(&d->intf->dev, "cmd=%d arg=%d\n", cmd, arg); /* * CEN always enabled by hardware wiring @@ -728,7 +724,7 @@ static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, else val = (0 << 4); - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10); if (ret) goto err; break; @@ -738,7 +734,7 @@ static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, else val = (0 << 1); - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02); if (ret) goto err; break; @@ -746,40 +742,46 @@ static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } -static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) -{ - struct rtl28xxu_priv *priv = d->priv; - - switch (priv->tuner) { - case TUNER_RTL2832_FC0012: - return rtl2832u_fc0012_tuner_callback(d, cmd, arg); - case TUNER_RTL2832_TUA9001: - return rtl2832u_tua9001_tuner_callback(d, cmd, arg); - default: - break; - } - - return 0; -} - static int rtl2832u_frontend_callback(void *adapter_priv, int component, int cmd, int arg) { - struct i2c_adapter *adap = adapter_priv; - struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct i2c_adapter *adapter = adapter_priv; + struct device *parent = adapter->dev.parent; + struct i2c_adapter *parent_adapter; + struct dvb_usb_device *d; + struct rtl28xxu_dev *dev; + + /* + * All tuners are connected to demod muxed I2C adapter. We have to + * resolve its parent adapter in order to get handle for this driver + * private data. That is a bit hackish solution, GPIO or direct driver + * callback would be better... + */ + if (parent != NULL && parent->type == &i2c_adapter_type) + parent_adapter = to_i2c_adapter(parent); + else + return -EINVAL; + + d = i2c_get_adapdata(parent_adapter); + dev = d->priv; - dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n", - __func__, component, cmd, arg); + dev_dbg(&d->intf->dev, "component=%d cmd=%d arg=%d\n", + component, cmd, arg); switch (component) { case DVB_FRONTEND_COMPONENT_TUNER: - return rtl2832u_tuner_callback(d, cmd, arg); + switch (dev->tuner) { + case TUNER_RTL2832_FC0012: + return rtl2832u_fc0012_tuner_callback(d, cmd, arg); + case TUNER_RTL2832_TUA9001: + return rtl2832u_tua9001_tuner_callback(d, cmd, arg); + } default: - break; + return -EINVAL; } return 0; @@ -787,57 +789,70 @@ static int rtl2832u_frontend_callback(void *adapter_priv, int component, static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) { - int ret; struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - const struct rtl2832_config *rtl2832_config; + struct rtl28xxu_dev *dev = d_to_priv(d); + struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data; + struct i2c_board_info board_info; + struct i2c_client *client; + int ret; - dev_dbg(&d->udev->dev, "%s:\n", __func__); + dev_dbg(&d->intf->dev, "\n"); - switch (priv->tuner) { + switch (dev->tuner) { case TUNER_RTL2832_FC0012: - rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; + *pdata = rtl2832_fc0012_platform_data; break; case TUNER_RTL2832_FC0013: - rtl2832_config = &rtl28xxu_rtl2832_fc0013_config; + *pdata = rtl2832_fc0013_platform_data; break; case TUNER_RTL2832_FC2580: /* FIXME: do not abuse fc0012 settings */ - rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; + *pdata = rtl2832_fc0012_platform_data; break; case TUNER_RTL2832_TUA9001: - rtl2832_config = &rtl28xxu_rtl2832_tua9001_config; + *pdata = rtl2832_tua9001_platform_data; break; case TUNER_RTL2832_E4000: - rtl2832_config = &rtl28xxu_rtl2832_e4000_config; + *pdata = rtl2832_e4000_platform_data; break; case TUNER_RTL2832_R820T: case TUNER_RTL2832_R828D: - rtl2832_config = &rtl28xxu_rtl2832_r820t_config; + *pdata = rtl2832_r820t_platform_data; break; default: - dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", - KBUILD_MODNAME, priv->tuner_name); + dev_err(&d->intf->dev, "unknown tuner %s\n", dev->tuner_name); ret = -ENODEV; goto err; } /* attach demodulator */ - adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap); - if (!adap->fe[0]) { + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "rtl2832", I2C_NAME_SIZE); + board_info.addr = 0x10; + board_info.platform_data = pdata; + request_module("%s", board_info.type); + client = i2c_new_device(&d->i2c_adap, &board_info); + if (client == NULL || client->dev.driver == NULL) { ret = -ENODEV; goto err; } - /* RTL2832 I2C repeater */ - priv->demod_i2c_adapter = rtl2832_get_i2c_adapter(adap->fe[0]); + if (!try_module_get(client->dev.driver->owner)) { + i2c_unregister_device(client); + ret = -ENODEV; + goto err; + } + + adap->fe[0] = pdata->get_dvb_frontend(client); + dev->demod_i2c_adapter = pdata->get_i2c_adapter(client); + + dev->i2c_client_demod = client; /* set fe callback */ adap->fe[0]->callback = rtl2832u_frontend_callback; - if (priv->slave_demod) { + if (dev->slave_demod) { struct i2c_board_info info = {}; - struct i2c_client *client; /* * We continue on reduced mode, without DVB-T2/C, using master @@ -846,28 +861,29 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) ret = 0; /* attach slave demodulator */ - if (priv->slave_demod == SLAVE_DEMOD_MN88472) { + if (dev->slave_demod == SLAVE_DEMOD_MN88472) { struct mn88472_config mn88472_config = {}; mn88472_config.fe = &adap->fe[1]; mn88472_config.i2c_wr_max = 22, strlcpy(info.type, "mn88472", I2C_NAME_SIZE); + mn88472_config.xtal = 20500000; info.addr = 0x18; info.platform_data = &mn88472_config; request_module(info.type); - client = i2c_new_device(priv->demod_i2c_adapter, &info); + client = i2c_new_device(&d->i2c_adap, &info); if (client == NULL || client->dev.driver == NULL) { - priv->slave_demod = SLAVE_DEMOD_NONE; + dev->slave_demod = SLAVE_DEMOD_NONE; goto err_slave_demod_failed; } if (!try_module_get(client->dev.driver->owner)) { i2c_unregister_device(client); - priv->slave_demod = SLAVE_DEMOD_NONE; + dev->slave_demod = SLAVE_DEMOD_NONE; goto err_slave_demod_failed; } - priv->i2c_client_slave_demod = client; + dev->i2c_client_slave_demod = client; } else { struct mn88473_config mn88473_config = {}; @@ -877,29 +893,64 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) info.addr = 0x18; info.platform_data = &mn88473_config; request_module(info.type); - client = i2c_new_device(priv->demod_i2c_adapter, &info); + client = i2c_new_device(&d->i2c_adap, &info); if (client == NULL || client->dev.driver == NULL) { - priv->slave_demod = SLAVE_DEMOD_NONE; + dev->slave_demod = SLAVE_DEMOD_NONE; goto err_slave_demod_failed; } if (!try_module_get(client->dev.driver->owner)) { i2c_unregister_device(client); - priv->slave_demod = SLAVE_DEMOD_NONE; + dev->slave_demod = SLAVE_DEMOD_NONE; goto err_slave_demod_failed; } - priv->i2c_client_slave_demod = client; + dev->i2c_client_slave_demod = client; } } return 0; err_slave_demod_failed: err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } +static int rtl28xxu_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct rtl28xxu_dev *dev = adap_to_priv(adap); + + if (dev->chip_id == CHIP_ID_RTL2831U) + return rtl2831u_frontend_attach(adap); + else + return rtl2832u_frontend_attach(adap); +} + +static int rtl28xxu_frontend_detach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_dev *dev = d_to_priv(d); + struct i2c_client *client; + + dev_dbg(&d->intf->dev, "\n"); + + /* remove I2C slave demod */ + client = dev->i2c_client_slave_demod; + if (client) { + module_put(client->dev.driver->owner); + i2c_unregister_device(client); + } + + /* remove I2C demod */ + client = dev->i2c_client_demod; + if (client) { + module_put(client->dev.driver->owner); + i2c_unregister_device(client); + } + + return 0; +} + static struct qt1010_config rtl28xxu_qt1010_config = { .i2c_address = 0x62, /* 0xc4 */ }; @@ -930,33 +981,30 @@ static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - struct i2c_adapter *rtl2830_tuner_i2c; + struct rtl28xxu_dev *dev = d_to_priv(d); struct dvb_frontend *fe; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ - rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]); + dev_dbg(&d->intf->dev, "\n"); - switch (priv->tuner) { + switch (dev->tuner) { case TUNER_RTL2830_QT1010: fe = dvb_attach(qt1010_attach, adap->fe[0], - rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); + dev->demod_i2c_adapter, + &rtl28xxu_qt1010_config); break; case TUNER_RTL2830_MT2060: fe = dvb_attach(mt2060_attach, adap->fe[0], - rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, - 1220); + dev->demod_i2c_adapter, + &rtl28xxu_mt2060_config, 1220); break; case TUNER_RTL2830_MXL5005S: fe = dvb_attach(mxl5005s_attach, adap->fe[0], - rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); + dev->demod_i2c_adapter, + &rtl28xxu_mxl5005s_config); break; default: fe = NULL; - dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, - priv->tuner); + dev_err(&d->intf->dev, "unknown tuner %d\n", dev->tuner); } if (fe == NULL) { @@ -966,7 +1014,7 @@ static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } @@ -1002,45 +1050,38 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); + struct rtl28xxu_dev *dev = d_to_priv(d); struct dvb_frontend *fe = NULL; struct i2c_board_info info; struct i2c_client *client; + struct v4l2_subdev *subdev = NULL; + struct platform_device *pdev; + struct rtl2832_sdr_platform_data pdata; - dev_dbg(&d->udev->dev, "%s:\n", __func__); + dev_dbg(&d->intf->dev, "\n"); memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&pdata, 0, sizeof(pdata)); - switch (priv->tuner) { + switch (dev->tuner) { case TUNER_RTL2832_FC0012: fe = dvb_attach(fc0012_attach, adap->fe[0], - &d->i2c_adap, &rtl2832u_fc0012_config); + dev->demod_i2c_adapter, &rtl2832u_fc0012_config); /* since fc0012 includs reading the signal strength delegate * that to the tuner driver */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; - - /* attach SDR */ - dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, - &rtl28xxu_rtl2832_fc0012_config, NULL); break; case TUNER_RTL2832_FC0013: fe = dvb_attach(fc0013_attach, adap->fe[0], - &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); + dev->demod_i2c_adapter, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); /* fc0013 also supports signal strength reading */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; - - /* attach SDR */ - dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, - &rtl28xxu_rtl2832_fc0013_config, NULL); break; case TUNER_RTL2832_E4000: { - struct v4l2_subdev *sd; - struct i2c_adapter *i2c_adap_internal = - rtl2832_get_private_i2c_adapter(adap->fe[0]); struct e4000_config e4000_config = { .fe = adap->fe[0], .clock = 28800000, @@ -1051,7 +1092,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) info.platform_data = &e4000_config; request_module(info.type); - client = i2c_new_device(priv->demod_i2c_adapter, &info); + client = i2c_new_device(dev->demod_i2c_adapter, &info); if (client == NULL || client->dev.driver == NULL) break; @@ -1060,157 +1101,183 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) break; } - priv->i2c_client_tuner = client; - sd = i2c_get_clientdata(client); - i2c_set_adapdata(i2c_adap_internal, d); - - /* attach SDR */ - dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], - i2c_adap_internal, - &rtl28xxu_rtl2832_e4000_config, sd); + dev->i2c_client_tuner = client; + subdev = i2c_get_clientdata(client); } break; case TUNER_RTL2832_FC2580: - fe = dvb_attach(fc2580_attach, adap->fe[0], &d->i2c_adap, + fe = dvb_attach(fc2580_attach, adap->fe[0], + dev->demod_i2c_adapter, &rtl2832u_fc2580_config); break; case TUNER_RTL2832_TUA9001: /* enable GPIO1 and GPIO4 as output */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12); if (ret) goto err; - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12); if (ret) goto err; - fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap, + fe = dvb_attach(tua9001_attach, adap->fe[0], + dev->demod_i2c_adapter, &rtl2832u_tua9001_config); break; case TUNER_RTL2832_R820T: - fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap, + fe = dvb_attach(r820t_attach, adap->fe[0], + dev->demod_i2c_adapter, &rtl2832u_r820t_config); /* Use tuner to get the signal strength */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; - - /* attach SDR */ - dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, - &rtl28xxu_rtl2832_r820t_config, NULL); break; case TUNER_RTL2832_R828D: fe = dvb_attach(r820t_attach, adap->fe[0], - priv->demod_i2c_adapter, + dev->demod_i2c_adapter, &rtl2832u_r828d_config); adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; if (adap->fe[1]) { fe = dvb_attach(r820t_attach, adap->fe[1], - priv->demod_i2c_adapter, + dev->demod_i2c_adapter, &rtl2832u_r828d_config); adap->fe[1]->ops.read_signal_strength = adap->fe[1]->ops.tuner_ops.get_rf_strength; } - - /* attach SDR */ - dvb_attach_sdr(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, - &rtl28xxu_rtl2832_r820t_config, NULL); break; default: - dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, - priv->tuner); + dev_err(&d->intf->dev, "unknown tuner %d\n", dev->tuner); } - - if (fe == NULL && priv->i2c_client_tuner == NULL) { + if (fe == NULL && dev->i2c_client_tuner == NULL) { ret = -ENODEV; goto err; } + /* register SDR */ + switch (dev->tuner) { + case TUNER_RTL2832_FC0012: + case TUNER_RTL2832_FC0013: + case TUNER_RTL2832_E4000: + case TUNER_RTL2832_R820T: + case TUNER_RTL2832_R828D: + pdata.clk = dev->rtl2832_platform_data.clk; + pdata.tuner = dev->tuner; + pdata.i2c_client = dev->i2c_client_demod; + pdata.bulk_read = dev->rtl2832_platform_data.bulk_read; + pdata.bulk_write = dev->rtl2832_platform_data.bulk_write; + pdata.update_bits = dev->rtl2832_platform_data.update_bits; + pdata.dvb_frontend = adap->fe[0]; + pdata.dvb_usb_device = d; + pdata.v4l2_subdev = subdev; + + request_module("%s", "rtl2832_sdr"); + pdev = platform_device_register_data(&d->intf->dev, + "rtl2832_sdr", + PLATFORM_DEVID_AUTO, + &pdata, sizeof(pdata)); + if (pdev == NULL || pdev->dev.driver == NULL) + break; + dev->platform_device_sdr = pdev; + break; + default: + dev_dbg(&d->intf->dev, "no SDR for tuner=%d\n", dev->tuner); + } + return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } +static int rtl28xxu_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct rtl28xxu_dev *dev = adap_to_priv(adap); + + if (dev->chip_id == CHIP_ID_RTL2831U) + return rtl2831u_tuner_attach(adap); + else + return rtl2832u_tuner_attach(adap); +} + +static int rtl28xxu_tuner_detach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap_to_d(adap); + struct rtl28xxu_dev *dev = d_to_priv(d); + struct i2c_client *client; + struct platform_device *pdev; + + dev_dbg(&d->intf->dev, "\n"); + + /* remove platform SDR */ + pdev = dev->platform_device_sdr; + if (pdev) + platform_device_unregister(pdev); + + /* remove I2C tuner */ + client = dev->i2c_client_tuner; + if (client) { + module_put(client->dev.driver->owner); + i2c_unregister_device(client); + } + + return 0; +} + static int rtl28xxu_init(struct dvb_usb_device *d) { int ret; u8 val; - dev_dbg(&d->udev->dev, "%s:\n", __func__); + dev_dbg(&d->intf->dev, "\n"); /* init USB endpoints */ - ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); + ret = rtl28xxu_rd_reg(d, USB_SYSCTL_0, &val); if (ret) goto err; /* enable DMA and Full Packet Mode*/ val |= 0x09; - ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); + ret = rtl28xxu_wr_reg(d, USB_SYSCTL_0, val); if (ret) goto err; /* set EPA maximum packet size to 0x0200 */ - ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); + ret = rtl28xxu_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); if (ret) goto err; /* change EPA FIFO length */ - ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); + ret = rtl28xxu_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); if (ret) goto err; return ret; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } -static void rtl28xxu_exit(struct dvb_usb_device *d) -{ - struct rtl28xxu_priv *priv = d->priv; - struct i2c_client *client; - - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* remove I2C tuner */ - client = priv->i2c_client_tuner; - if (client) { - module_put(client->dev.driver->owner); - i2c_unregister_device(client); - } - - /* remove I2C slave demod */ - client = priv->i2c_client_slave_demod; - if (client) { - module_put(client->dev.driver->owner); - i2c_unregister_device(client); - } - - return; -} - static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) { int ret; u8 gpio, sys0, epa_ctl[2]; - dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->intf->dev, "onoff=%d\n", onoff); /* demod adc */ - ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0); + ret = rtl28xxu_rd_reg(d, SYS_SYS0, &sys0); if (ret) goto err; /* tuner power, read GPIOs */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); + ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); if (ret) goto err; - dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, - sys0, gpio); + dev_dbg(&d->intf->dev, "RD SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio); if (onoff) { gpio |= 0x01; /* GPIO0 = 1 */ @@ -1229,21 +1296,20 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) epa_ctl[1] = 0x02; /* set reset */ } - dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, - sys0, gpio); + dev_dbg(&d->intf->dev, "WR SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio); /* demod adc */ - ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0); + ret = rtl28xxu_wr_reg(d, SYS_SYS0, sys0); if (ret) goto err; /* tuner power, write GPIOs */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); + ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); if (ret) goto err; /* streaming EP: stall & reset */ - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2); + ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, epa_ctl, 2); if (ret) goto err; @@ -1252,7 +1318,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) return ret; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } @@ -1260,31 +1326,31 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) { int ret; - dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); + dev_dbg(&d->intf->dev, "onoff=%d\n", onoff); if (onoff) { /* GPIO3=1, GPIO4=0 */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18); if (ret) goto err; /* suspend? */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10); if (ret) goto err; /* enable PLL */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80); if (ret) goto err; /* disable reset */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20); if (ret) goto err; /* streaming EP: clear stall & reset */ - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2); + ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2); if (ret) goto err; @@ -1293,35 +1359,49 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) goto err; } else { /* GPIO4=1 */ - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10); + ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10); if (ret) goto err; /* disable PLL */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80); if (ret) goto err; /* streaming EP: set stall & reset */ - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2); + ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2); if (ret) goto err; } return ret; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } -static int rtl2832u_frontend_ctrl(struct dvb_frontend *fe, int onoff) +static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + struct rtl28xxu_dev *dev = d_to_priv(d); + + if (dev->chip_id == CHIP_ID_RTL2831U) + return rtl2831u_power_ctrl(d, onoff); + else + return rtl2832u_power_ctrl(d, onoff); +} + +static int rtl28xxu_frontend_ctrl(struct dvb_frontend *fe, int onoff) { struct dvb_usb_device *d = fe_to_d(fe); - struct dvb_usb_adapter *adap = fe_to_adap(fe); + struct rtl28xxu_dev *dev = fe_to_priv(fe); + struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data; int ret; u8 val; - dev_dbg(&d->udev->dev, "%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); + dev_dbg(&d->intf->dev, "fe=%d onoff=%d\n", fe->id, onoff); + + if (dev->chip_id == CHIP_ID_RTL2831U) + return 0; /* control internal demod ADC */ if (fe->id == 0 && onoff) @@ -1329,20 +1409,20 @@ static int rtl2832u_frontend_ctrl(struct dvb_frontend *fe, int onoff) else val = 0x00; /* disable ADC */ - ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, val, 0x48); + ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, val, 0x48); if (ret) goto err; /* bypass slave demod TS through master demod */ if (fe->id == 1 && onoff) { - ret = rtl2832_enable_external_ts_if(adap->fe[0]); + ret = pdata->enable_slave_ts(dev->i2c_client_demod); if (ret) goto err; } return 0; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } @@ -1350,7 +1430,7 @@ err: static int rtl2831u_rc_query(struct dvb_usb_device *d) { int ret, i; - struct rtl28xxu_priv *priv = d->priv; + struct rtl28xxu_dev *dev = d->priv; u8 buf[5]; u32 rc_code; struct rtl28xxu_reg_val rc_nec_tab[] = { @@ -1371,17 +1451,17 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) }; /* init remote controller */ - if (!priv->rc_active) { + if (!dev->rc_active) { for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { - ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg, + ret = rtl28xxu_wr_reg(d, rc_nec_tab[i].reg, rc_nec_tab[i].val); if (ret) goto err; } - priv->rc_active = true; + dev->rc_active = true; } - ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); + ret = rtl28xxu_rd_regs(d, SYS_IRRC_RP, buf, 5); if (ret) goto err; @@ -1403,19 +1483,19 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d) rc_keydown(d->rc_dev, RC_TYPE_NEC, rc_code, 0); - ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); + ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1); if (ret) goto err; /* repeated intentionally to avoid extra keypress */ - ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); + ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1); if (ret) goto err; } return ret; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } @@ -1433,7 +1513,7 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d, static int rtl2832u_rc_query(struct dvb_usb_device *d) { int ret, i, len; - struct rtl28xxu_priv *priv = d->priv; + struct rtl28xxu_dev *dev = d->priv; struct ir_raw_event ev; u8 buf[128]; static const struct rtl28xxu_reg_val_mask refresh_tab[] = { @@ -1443,7 +1523,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) }; /* init remote controller */ - if (!priv->rc_active) { + if (!dev->rc_active) { static const struct rtl28xxu_reg_val_mask init_tab[] = { {SYS_DEMOD_CTL1, 0x00, 0x04}, {SYS_DEMOD_CTL1, 0x00, 0x08}, @@ -1464,36 +1544,36 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) }; for (i = 0; i < ARRAY_SIZE(init_tab); i++) { - ret = rtl28xx_wr_reg_mask(d, init_tab[i].reg, + ret = rtl28xxu_wr_reg_mask(d, init_tab[i].reg, init_tab[i].val, init_tab[i].mask); if (ret) goto err; } - priv->rc_active = true; + dev->rc_active = true; } - ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]); + ret = rtl28xxu_rd_reg(d, IR_RX_IF, &buf[0]); if (ret) goto err; if (buf[0] != 0x83) goto exit; - ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]); + ret = rtl28xxu_rd_reg(d, IR_RX_BC, &buf[0]); if (ret) goto err; len = buf[0]; /* read raw code from hw */ - ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); + ret = rtl28xxu_rd_regs(d, IR_RX_BUF, buf, len); if (ret) goto err; /* let hw receive new code */ for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) { - ret = rtl28xx_wr_reg_mask(d, refresh_tab[i].reg, + ret = rtl28xxu_wr_reg_mask(d, refresh_tab[i].reg, refresh_tab[i].val, refresh_tab[i].mask); if (ret) goto err; @@ -1514,7 +1594,7 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d) exit: return ret; err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); + dev_dbg(&d->intf->dev, "failed=%d\n", ret); return ret; } @@ -1523,7 +1603,7 @@ static int rtl2832u_get_rc_config(struct dvb_usb_device *d, { /* disable IR interrupts in order to avoid SDR sample loss */ if (rtl28xxu_disable_rc) - return rtl28xx_wr_reg(d, IR_RX_IE, 0x00); + return rtl28xxu_wr_reg(d, IR_RX_IE, 0x00); /* load empty to enable rc */ if (!rc->map_name) @@ -1535,52 +1615,80 @@ static int rtl2832u_get_rc_config(struct dvb_usb_device *d, return 0; } + +static int rtl28xxu_get_rc_config(struct dvb_usb_device *d, + struct dvb_usb_rc *rc) +{ + struct rtl28xxu_dev *dev = d_to_priv(d); + + if (dev->chip_id == CHIP_ID_RTL2831U) + return rtl2831u_get_rc_config(d, rc); + else + return rtl2832u_get_rc_config(d, rc); +} #else -#define rtl2831u_get_rc_config NULL -#define rtl2832u_get_rc_config NULL +#define rtl28xxu_get_rc_config NULL #endif -static const struct dvb_usb_device_properties rtl2831u_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct rtl28xxu_priv), +static int rtl28xxu_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct rtl28xxu_dev *dev = adap_to_priv(adap); - .power_ctrl = rtl2831u_power_ctrl, - .i2c_algo = &rtl28xxu_i2c_algo, - .read_config = rtl2831u_read_config, - .frontend_attach = rtl2831u_frontend_attach, - .tuner_attach = rtl2831u_tuner_attach, - .init = rtl28xxu_init, - .get_rc_config = rtl2831u_get_rc_config, + if (dev->chip_id == CHIP_ID_RTL2831U) { + struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data; - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), - }, - }, -}; + return pdata->pid_filter_ctrl(adap->fe[0], onoff); + } else { + struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data; -static const struct dvb_usb_device_properties rtl2832u_props = { + return pdata->pid_filter_ctrl(adap->fe[0], onoff); + } +} + +static int rtl28xxu_pid_filter(struct dvb_usb_adapter *adap, int index, + u16 pid, int onoff) +{ + struct rtl28xxu_dev *dev = adap_to_priv(adap); + + if (dev->chip_id == CHIP_ID_RTL2831U) { + struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data; + + return pdata->pid_filter(adap->fe[0], index, pid, onoff); + } else { + struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data; + + return pdata->pid_filter(adap->fe[0], index, pid, onoff); + } +} + +static const struct dvb_usb_device_properties rtl28xxu_props = { .driver_name = KBUILD_MODNAME, .owner = THIS_MODULE, .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct rtl28xxu_priv), + .size_of_priv = sizeof(struct rtl28xxu_dev), - .power_ctrl = rtl2832u_power_ctrl, - .frontend_ctrl = rtl2832u_frontend_ctrl, + .identify_state = rtl28xxu_identify_state, + .power_ctrl = rtl28xxu_power_ctrl, + .frontend_ctrl = rtl28xxu_frontend_ctrl, .i2c_algo = &rtl28xxu_i2c_algo, - .read_config = rtl2832u_read_config, - .frontend_attach = rtl2832u_frontend_attach, - .tuner_attach = rtl2832u_tuner_attach, + .read_config = rtl28xxu_read_config, + .frontend_attach = rtl28xxu_frontend_attach, + .frontend_detach = rtl28xxu_frontend_detach, + .tuner_attach = rtl28xxu_tuner_attach, + .tuner_detach = rtl28xxu_tuner_detach, .init = rtl28xxu_init, - .exit = rtl28xxu_exit, - .get_rc_config = rtl2832u_get_rc_config, + .get_rc_config = rtl28xxu_get_rc_config, .num_adapters = 1, .adapter = { { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter_ctrl = rtl28xxu_pid_filter_ctrl, + .pid_filter = rtl28xxu_pid_filter, + .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, }, @@ -1589,69 +1697,69 @@ static const struct dvb_usb_device_properties rtl2832u_props = { static const struct usb_device_id rtl28xxu_id_table[] = { /* RTL2831U devices: */ { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U, - &rtl2831u_props, "Realtek RTL2831U reference design", NULL) }, + &rtl28xxu_props, "Realtek RTL2831U reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT, - &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, + &rtl28xxu_props, "Freecom USB2.0 DVB-T", NULL) }, { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2, - &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, + &rtl28xxu_props, "Freecom USB2.0 DVB-T", NULL) }, /* RTL2832U devices: */ { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832, - &rtl2832u_props, "Realtek RTL2832U reference design", NULL) }, + &rtl28xxu_props, "Realtek RTL2832U reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838, - &rtl2832u_props, "Realtek RTL2832U reference design", NULL) }, + &rtl28xxu_props, "Realtek RTL2832U reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1, - &rtl2832u_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) }, + &rtl28xxu_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) }, { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT, - &rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) }, + &rtl28xxu_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, - &rtl2832u_props, "TerraTec NOXON DAB Stick", NULL) }, + &rtl28xxu_props, "TerraTec NOXON DAB Stick", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV2, - &rtl2832u_props, "TerraTec NOXON DAB Stick (rev 2)", NULL) }, + &rtl28xxu_props, "TerraTec NOXON DAB Stick (rev 2)", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV3, - &rtl2832u_props, "TerraTec NOXON DAB Stick (rev 3)", NULL) }, + &rtl28xxu_props, "TerraTec NOXON DAB Stick (rev 3)", NULL) }, { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0, - &rtl2832u_props, "Trekstor DVB-T Stick Terres 2.0", NULL) }, + &rtl28xxu_props, "Trekstor DVB-T Stick Terres 2.0", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101, - &rtl2832u_props, "Dexatek DK DVB-T Dongle", NULL) }, + &rtl28xxu_props, "Dexatek DK DVB-T Dongle", NULL) }, { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680, - &rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) }, + &rtl28xxu_props, "DigitalNow Quad DVB-T Receiver", NULL) }, { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_MINID, - &rtl2832u_props, "Leadtek Winfast DTV Dongle Mini D", NULL) }, + &rtl28xxu_props, "Leadtek Winfast DTV Dongle Mini D", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3, - &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, + &rtl28xxu_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102, - &rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) }, + &rtl28xxu_props, "Dexatek DK mini DVB-T Dongle", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7, - &rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) }, + &rtl28xxu_props, "TerraTec Cinergy T Stick+", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd3a8, - &rtl2832u_props, "ASUS My Cinema-U3100Mini Plus V2", NULL) }, + &rtl28xxu_props, "ASUS My Cinema-U3100Mini Plus V2", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd393, - &rtl2832u_props, "GIGABYTE U7300", NULL) }, + &rtl28xxu_props, "GIGABYTE U7300", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1104, - &rtl2832u_props, "MSI DIGIVOX Micro HD", NULL) }, + &rtl28xxu_props, "MSI DIGIVOX Micro HD", NULL) }, { DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620, - &rtl2832u_props, "Compro VideoMate U620F", NULL) }, + &rtl28xxu_props, "Compro VideoMate U620F", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, - &rtl2832u_props, "MaxMedia HU394-T", NULL) }, + &rtl28xxu_props, "MaxMedia HU394-T", NULL) }, { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03, - &rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) }, + &rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) }, { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A, - &rtl2832u_props, "Crypto ReDi PC 50 A", NULL) }, + &rtl28xxu_props, "Crypto ReDi PC 50 A", NULL) }, { DVB_USB_DEVICE(USB_VID_KYE, 0x707f, - &rtl2832u_props, "Genius TVGo DVB-T03", NULL) }, + &rtl28xxu_props, "Genius TVGo DVB-T03", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd395, - &rtl2832u_props, "Peak DVB-T USB", NULL) }, + &rtl28xxu_props, "Peak DVB-T USB", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20_RTL2832U, - &rtl2832u_props, "Sveon STV20", NULL) }, + &rtl28xxu_props, "Sveon STV20", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV21, - &rtl2832u_props, "Sveon STV21", NULL) }, + &rtl28xxu_props, "Sveon STV21", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV27, - &rtl2832u_props, "Sveon STV27", NULL) }, + &rtl28xxu_props, "Sveon STV27", NULL) }, /* RTL2832P devices: */ { DVB_USB_DEVICE(USB_VID_HANFTEK, 0x0131, - &rtl2832u_props, "Astrometa DVB-T2", NULL) }, + &rtl28xxu_props, "Astrometa DVB-T2", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h index 3e3ea9d64a38..1b5d7ffb685e 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h @@ -22,8 +22,26 @@ #ifndef RTL28XXU_H #define RTL28XXU_H +#include <linux/platform_device.h> + #include "dvb_usb.h" +#include "rtl2830.h" +#include "rtl2832.h" +#include "rtl2832_sdr.h" +#include "mn88472.h" +#include "mn88473.h" + +#include "qt1010.h" +#include "mt2060.h" +#include "mxl5005s.h" +#include "fc0012.h" +#include "fc0013.h" +#include "e4000.h" +#include "fc2580.h" +#include "tua9001.h" +#include "r820t.h" + /* * USB commands * (usb_control_msg() index parameter) @@ -50,19 +68,26 @@ #define CMD_I2C_DA_WR 0x0610 -struct rtl28xxu_priv { +struct rtl28xxu_dev { + u8 buf[28]; u8 chip_id; u8 tuner; char *tuner_name; u8 page; /* integrated demod active register page */ struct i2c_adapter *demod_i2c_adapter; bool rc_active; + struct i2c_client *i2c_client_demod; struct i2c_client *i2c_client_tuner; struct i2c_client *i2c_client_slave_demod; + struct platform_device *platform_device_sdr; #define SLAVE_DEMOD_NONE 0 #define SLAVE_DEMOD_MN88472 1 #define SLAVE_DEMOD_MN88473 2 unsigned int slave_demod:2; + union { + struct rtl2830_platform_data rtl2830_platform_data; + struct rtl2832_platform_data rtl2832_platform_data; + }; }; enum rtl28xxu_chip_id { diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c index abf8ab2e02e5..eafc5c82467f 100644 --- a/drivers/media/usb/dvb-usb/m920x.c +++ b/drivers/media/usb/dvb-usb/m920x.c @@ -1269,8 +1269,3 @@ MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>"); MODULE_DESCRIPTION("DVB Driver for ULI M920x"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - */ diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c index 44ae1e0661e6..49a5f9532bd8 100644 --- a/drivers/media/usb/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -820,7 +820,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) if (urb_size > ep_size * npackets) npackets = DIV_ROUND_UP(urb_size, ep_size); - em28xx_info("Number of URBs: %d, with %d packets and %d size", + em28xx_info("Number of URBs: %d, with %d packets and %d size\n", num_urb, npackets, urb_size); /* Estimate the bytes per period */ @@ -981,7 +981,7 @@ static int em28xx_audio_fini(struct em28xx *dev) return 0; } - em28xx_info("Closing audio extension"); + em28xx_info("Closing audio extension\n"); if (dev->adev.sndcard) { snd_card_disconnect(dev->adev.sndcard); @@ -1005,7 +1005,7 @@ static int em28xx_audio_suspend(struct em28xx *dev) if (dev->usb_audio_type != EM28XX_USB_AUDIO_VENDOR) return 0; - em28xx_info("Suspending audio extension"); + em28xx_info("Suspending audio extension\n"); em28xx_deinit_isoc_audio(dev); atomic_set(&dev->adev.stream_started, 0); return 0; @@ -1019,7 +1019,7 @@ static int em28xx_audio_resume(struct em28xx *dev) if (dev->usb_audio_type != EM28XX_USB_AUDIO_VENDOR) return 0; - em28xx_info("Resuming audio extension"); + em28xx_info("Resuming audio extension\n"); /* Nothing to do other than schedule_work() ?? */ schedule_work(&dev->adev.wq_trigger); return 0; diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c index 86461a708abe..37456079f490 100644 --- a/drivers/media/usb/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -1125,7 +1125,7 @@ int em28xx_suspend_extension(struct em28xx *dev) { const struct em28xx_ops *ops = NULL; - em28xx_info("Suspending extensions"); + em28xx_info("Suspending extensions\n"); mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(ops, &em28xx_extension_devlist, next) { if (ops->suspend) @@ -1139,7 +1139,7 @@ int em28xx_resume_extension(struct em28xx *dev) { const struct em28xx_ops *ops = NULL; - em28xx_info("Resuming extensions"); + em28xx_info("Resuming extensions\n"); mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(ops, &em28xx_extension_devlist, next) { if (ops->resume) diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 9877b699c6bc..aee70d483264 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -1724,7 +1724,7 @@ static int em28xx_dvb_fini(struct em28xx *dev) if (!dev->dvb) return 0; - em28xx_info("Closing DVB extension"); + em28xx_info("Closing DVB extension\n"); dvb = dev->dvb; client = dvb->i2c_client_tuner; @@ -1775,17 +1775,17 @@ static int em28xx_dvb_suspend(struct em28xx *dev) if (!dev->board.has_dvb) return 0; - em28xx_info("Suspending DVB extension"); + em28xx_info("Suspending DVB extension\n"); if (dev->dvb) { struct em28xx_dvb *dvb = dev->dvb; if (dvb->fe[0]) { ret = dvb_frontend_suspend(dvb->fe[0]); - em28xx_info("fe0 suspend %d", ret); + em28xx_info("fe0 suspend %d\n", ret); } if (dvb->fe[1]) { dvb_frontend_suspend(dvb->fe[1]); - em28xx_info("fe1 suspend %d", ret); + em28xx_info("fe1 suspend %d\n", ret); } } @@ -1802,18 +1802,18 @@ static int em28xx_dvb_resume(struct em28xx *dev) if (!dev->board.has_dvb) return 0; - em28xx_info("Resuming DVB extension"); + em28xx_info("Resuming DVB extension\n"); if (dev->dvb) { struct em28xx_dvb *dvb = dev->dvb; if (dvb->fe[0]) { ret = dvb_frontend_resume(dvb->fe[0]); - em28xx_info("fe0 resume %d", ret); + em28xx_info("fe0 resume %d\n", ret); } if (dvb->fe[1]) { ret = dvb_frontend_resume(dvb->fe[1]); - em28xx_info("fe1 resume %d", ret); + em28xx_info("fe1 resume %d\n", ret); } } diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c index d8dc03aadfbd..4007356d991d 100644 --- a/drivers/media/usb/em28xx/em28xx-input.c +++ b/drivers/media/usb/em28xx/em28xx-input.c @@ -654,8 +654,6 @@ next_button: if (dev->num_button_polling_addresses) { memset(dev->button_polling_last_values, 0, EM28XX_NUM_BUTTON_ADDRESSES_MAX); - INIT_DELAYED_WORK(&dev->buttons_query_work, - em28xx_query_buttons); schedule_delayed_work(&dev->buttons_query_work, msecs_to_jiffies(dev->button_polling_interval)); } @@ -689,6 +687,7 @@ static int em28xx_ir_init(struct em28xx *dev) } kref_get(&dev->ref); + INIT_DELAYED_WORK(&dev->buttons_query_work, em28xx_query_buttons); if (dev->board.buttons) em28xx_init_buttons(dev); @@ -833,7 +832,7 @@ static int em28xx_ir_fini(struct em28xx *dev) return 0; } - em28xx_info("Closing input extension"); + em28xx_info("Closing input extension\n"); em28xx_shutdown_buttons(dev); @@ -862,7 +861,7 @@ static int em28xx_ir_suspend(struct em28xx *dev) if (dev->is_audio_only) return 0; - em28xx_info("Suspending input extension"); + em28xx_info("Suspending input extension\n"); if (ir) cancel_delayed_work_sync(&ir->work); cancel_delayed_work_sync(&dev->buttons_query_work); @@ -879,7 +878,7 @@ static int em28xx_ir_resume(struct em28xx *dev) if (dev->is_audio_only) return 0; - em28xx_info("Resuming input extension"); + em28xx_info("Resuming input extension\n"); /* if suspend calls ir_raw_event_unregister(), the should call ir_raw_event_register() */ if (ir) diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index cf7f58b76292..9ecf65629b3d 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -1958,7 +1958,7 @@ static int em28xx_v4l2_fini(struct em28xx *dev) if (v4l2 == NULL) return 0; - em28xx_info("Closing video extension"); + em28xx_info("Closing video extension\n"); mutex_lock(&dev->lock); @@ -2007,7 +2007,7 @@ static int em28xx_v4l2_suspend(struct em28xx *dev) if (!dev->has_video) return 0; - em28xx_info("Suspending video extension"); + em28xx_info("Suspending video extension\n"); em28xx_stop_urbs(dev); return 0; } @@ -2020,7 +2020,7 @@ static int em28xx_v4l2_resume(struct em28xx *dev) if (!dev->has_video) return 0; - em28xx_info("Resuming video extension"); + em28xx_info("Resuming video extension\n"); /* what do we do here */ return 0; } @@ -2192,7 +2192,6 @@ static struct video_device *vfd = *template; vfd->v4l2_dev = &dev->v4l2->v4l2_dev; - vfd->debug = video_debug; vfd->lock = &dev->lock; if (dev->board.is_webcam) vfd->tvnorms = 0; diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig index eed10d782535..60af3b167f3b 100644 --- a/drivers/media/usb/gspca/Kconfig +++ b/drivers/media/usb/gspca/Kconfig @@ -395,6 +395,16 @@ config USB_GSPCA_TOPRO To compile this driver as a module, choose M here: the module will be called gspca_topro. +config USB_GSPCA_TOUPTEK + tristate "Touptek USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the ToupTek UCMOS + / AmScope MU series camera. + + To compile this driver as a module, choose M here: the + module will be called gspca_touptek. + config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/usb/gspca/Makefile b/drivers/media/usb/gspca/Makefile index f46975e4c82d..9f5ccecb9c8a 100644 --- a/drivers/media/usb/gspca/Makefile +++ b/drivers/media/usb/gspca/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_USB_GSPCA_STK1135) += gspca_stk1135.o obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o obj-$(CONFIG_USB_GSPCA_TOPRO) += gspca_topro.o +obj-$(CONFIG_USB_GSPCA_TOUPTEK) += gspca_touptek.o obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o obj-$(CONFIG_USB_GSPCA_VICAM) += gspca_vicam.o @@ -86,6 +87,7 @@ gspca_stv0680-objs := stv0680.o gspca_sunplus-objs := sunplus.o gspca_t613-objs := t613.o gspca_topro-objs := topro.o +gspca_touptek-objs := touptek.o gspca_tv8532-objs := tv8532.o gspca_vc032x-objs := vc032x.o gspca_vicam-objs := vicam.o diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c index 43d65057a5fe..e54cee856a80 100644 --- a/drivers/media/usb/gspca/gspca.c +++ b/drivers/media/usb/gspca/gspca.c @@ -1562,7 +1562,7 @@ static int vidioc_s_parm(struct file *filp, void *priv, struct v4l2_streamparm *parm) { struct gspca_dev *gspca_dev = video_drvdata(filp); - int n; + unsigned int n; n = parm->parm.capture.readbuffers; if (n == 0 || n >= GSPCA_MAX_FRAMES) diff --git a/drivers/media/usb/gspca/ov534.c b/drivers/media/usb/gspca/ov534.c index 90f0d637cd9d..a9c866d6d82d 100644 --- a/drivers/media/usb/gspca/ov534.c +++ b/drivers/media/usb/gspca/ov534.c @@ -12,6 +12,8 @@ * PS3 Eye camera enhanced by Richard Kaswy http://kaswy.free.fr * PS3 Eye camera - brightness, contrast, awb, agc, aec controls * added by Max Thrun <bear24rw@gmail.com> + * PS3 Eye camera - FPS range extended by Joseph Howse + * <josephhowse@nummist.com> http://nummist.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -116,7 +118,7 @@ static const struct v4l2_pix_format ov767x_mode[] = { .colorspace = V4L2_COLORSPACE_JPEG}, }; -static const u8 qvga_rates[] = {125, 100, 75, 60, 50, 40, 30}; +static const u8 qvga_rates[] = {187, 150, 137, 125, 100, 75, 60, 50, 37, 30}; static const u8 vga_rates[] = {60, 50, 40, 30, 15}; static const struct framerates ov772x_framerates[] = { @@ -769,12 +771,16 @@ static void set_frame_rate(struct gspca_dev *gspca_dev) {15, 0x03, 0x41, 0x04}, }; static const struct rate_s rate_1[] = { /* 320x240 */ +/* {205, 0x01, 0xc1, 0x02}, * 205 FPS: video is partly corrupt */ + {187, 0x01, 0x81, 0x02}, /* 187 FPS or below: video is valid */ + {150, 0x01, 0xc1, 0x04}, + {137, 0x02, 0xc1, 0x02}, {125, 0x02, 0x81, 0x02}, {100, 0x02, 0xc1, 0x04}, {75, 0x03, 0xc1, 0x04}, {60, 0x04, 0xc1, 0x04}, {50, 0x02, 0x41, 0x04}, - {40, 0x03, 0x41, 0x04}, + {37, 0x03, 0x41, 0x04}, {30, 0x04, 0x41, 0x04}, }; diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c index 49d209bbf9ee..6ac93d8db427 100644 --- a/drivers/media/usb/gspca/stv06xx/stv06xx.c +++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c @@ -505,13 +505,13 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, { int ret = -EINVAL; - if (len == 1 && data[0] == 0x80) { + if (len == 1 && (data[0] == 0x80 || data[0] == 0x10)) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); input_sync(gspca_dev->input_dev); ret = 0; } - if (len == 1 && data[0] == 0x88) { + if (len == 1 && (data[0] == 0x88 || data[0] == 0x11)) { input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); input_sync(gspca_dev->input_dev); ret = 0; diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c new file mode 100644 index 000000000000..7bac6bc96063 --- /dev/null +++ b/drivers/media/usb/gspca/touptek.c @@ -0,0 +1,731 @@ +/* + * ToupTek UCMOS / AmScope MU series camera driver + * TODO: contrast with ScopeTek / AmScope MDC cameras + * + * Copyright (C) 2012-2014 John McMaster <JohnDMcMaster@gmail.com> + * + * Special thanks to Bushing for helping with the decrypt algorithm and + * Sean O'Sullivan / the Rensselaer Center for Open Source + * Software (RCOS) for helping me learn kernel development + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "gspca.h" + +#define MODULE_NAME "touptek" + +MODULE_AUTHOR("John McMaster"); +MODULE_DESCRIPTION("ToupTek UCMOS / Amscope MU microscope camera driver"); +MODULE_LICENSE("GPL"); + +/* + * Exposure reg is linear with exposure time + * Exposure (sec), E (reg) + * 0.000400, 0x0002 + * 0.001000, 0x0005 + * 0.005000, 0x0019 + * 0.020000, 0x0064 + * 0.080000, 0x0190 + * 0.400000, 0x07D0 + * 1.000000, 0x1388 + * 2.000000, 0x2710 + * + * Three gain stages + * 0x1000: master channel enable bit + * 0x007F: low gain bits + * 0x0080: medium gain bit + * 0x0100: high gain bit + * gain = enable * (1 + regH) * (1 + regM) * z * regL + * + * Gain implementation + * Want to do something similar to mt9v011.c's set_balance + * + * Gain does not vary with resolution (checked 640x480 vs 1600x1200) + * + * Constant derivation: + * + * Raw data: + * Gain, GTOP, B, R, GBOT + * 1.00, 0x105C, 0x1068, 0x10C8, 0x105C + * 1.20, 0x106E, 0x107E, 0x10D6, 0x106E + * 1.40, 0x10C0, 0x10CA, 0x10E5, 0x10C0 + * 1.60, 0x10C9, 0x10D4, 0x10F3, 0x10C9 + * 1.80, 0x10D2, 0x10DE, 0x11C1, 0x10D2 + * 2.00, 0x10DC, 0x10E9, 0x11C8, 0x10DC + * 2.20, 0x10E5, 0x10F3, 0x11CF, 0x10E5 + * 2.40, 0x10EE, 0x10FE, 0x11D7, 0x10EE + * 2.60, 0x10F7, 0x11C4, 0x11DE, 0x10F7 + * 2.80, 0x11C0, 0x11CA, 0x11E5, 0x11C0 + * 3.00, 0x11C5, 0x11CF, 0x11ED, 0x11C5 + * + * zR = 0.0069605943152454778 + * about 3/431 = 0.0069605568445475635 + * zB = 0.0095695970695970703 + * about 6/627 = 0.0095693779904306216 + * zG = 0.010889328063241107 + * about 6/551 = 0.010889292196007259 + * about 10 bits for constant + 7 bits for value => at least 17 bit + * intermediate with 32 bit ints should be fine for overflow etc + * Essentially gains are in range 0-0x001FF + * + * However, V4L expects a main gain channel + R and B balance + * To keep things simple for now saturate the values of balance is too high/low + * This isn't really ideal but easy way to fit the Linux model + * + * Converted using gain model turns out to be quite linear: + * Gain, GTOP, B, R, GBOT + * 1.00, 92, 104, 144, 92 + * 1.20, 110, 126, 172, 110 + * 1.40, 128, 148, 202, 128 + * 1.60, 146, 168, 230, 146 + * 1.80, 164, 188, 260, 164 + * 2.00, 184, 210, 288, 184 + * 2.20, 202, 230, 316, 202 + * 2.40, 220, 252, 348, 220 + * 2.60, 238, 272, 376, 238 + * 2.80, 256, 296, 404, 256 + * 3.00, 276, 316, 436, 276 + * + * Maximum gain is 0x7FF * 2 * 2 => 0x1FFC (8188) + * or about 13 effective bits of gain + * The highest the commercial driver goes in my setup 436 + * However, because could *maybe* damage circuits + * limit the gain until have a reason to go higher + * Solution: gain clipped and warning emitted + */ +#define GAIN_MAX 511 + +/* Frame sync is a short read */ +#define BULK_SIZE 0x4000 + +/* MT9E001 reg names to give a rough approximation */ +#define REG_COARSE_INTEGRATION_TIME_ 0x3012 +#define REG_GROUPED_PARAMETER_HOLD_ 0x3022 +#define REG_MODE_SELECT 0x0100 +#define REG_OP_SYS_CLK_DIV 0x030A +#define REG_VT_SYS_CLK_DIV 0x0302 +#define REG_PRE_PLL_CLK_DIV 0x0304 +#define REG_VT_PIX_CLK_DIV 0x0300 +#define REG_OP_PIX_CLK_DIV 0x0308 +#define REG_PLL_MULTIPLIER 0x0306 +#define REG_COARSE_INTEGRATION_TIME_ 0x3012 +#define REG_FRAME_LENGTH_LINES 0x0340 +#define REG_FRAME_LENGTH_LINES_ 0x300A +#define REG_GREEN1_GAIN 0x3056 +#define REG_GREEN2_GAIN 0x305C +#define REG_GROUPED_PARAMETER_HOLD 0x0104 +#define REG_LINE_LENGTH_PCK_ 0x300C +#define REG_MODE_SELECT 0x0100 +#define REG_PLL_MULTIPLIER 0x0306 +#define REG_READ_MODE 0x3040 +#define REG_BLUE_GAIN 0x3058 +#define REG_RED_GAIN 0x305A +#define REG_RESET_REGISTER 0x301A +#define REG_SCALE_M 0x0404 +#define REG_SCALING_MODE 0x0400 +#define REG_SOFTWARE_RESET 0x0103 +#define REG_X_ADDR_END 0x0348 +#define REG_X_ADDR_START 0x0344 +#define REG_X_ADDR_START 0x0344 +#define REG_X_OUTPUT_SIZE 0x034C +#define REG_Y_ADDR_END 0x034A +#define REG_Y_ADDR_START 0x0346 +#define REG_Y_OUTPUT_SIZE 0x034E + + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + /* How many bytes this frame */ + unsigned int this_f; + + /* + Device has separate gains for each Bayer quadrant + V4L supports master gain which is referenced to G1/G2 and supplies + individual balance controls for R/B + */ + struct v4l2_ctrl *blue; + struct v4l2_ctrl *red; +}; + +/* Used to simplify reg write error handling */ +struct cmd { + u16 value; + u16 index; +}; + +static const struct v4l2_pix_format vga_mode[] = { + {800, 600, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB}, + {1600, 1200, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .bytesperline = 1600, + .sizeimage = 1600 * 1200, + .colorspace = V4L2_COLORSPACE_SRGB}, + {3264, 2448, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .bytesperline = 3264, + .sizeimage = 3264 * 2448, + .colorspace = V4L2_COLORSPACE_SRGB}, +}; + +/* + * As theres no known frame sync, the only way to keep synced is to try hard + * to never miss any packets + */ +#if MAX_NURBS < 4 +#error "Not enough URBs in the gspca table" +#endif + +static int val_reply(struct gspca_dev *gspca_dev, const char *reply, int rc) +{ + if (rc < 0) { + PERR("reply has error %d", rc); + return -EIO; + } + if (rc != 1) { + PERR("Bad reply size %d", rc); + return -EIO; + } + if (reply[0] != 0x08) { + PERR("Bad reply 0x%02X", reply[0]); + return -EIO; + } + return 0; +} + +static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) +{ + char buff[1]; + int rc; + + PDEBUG(D_USBO, + "reg_w bReq=0x0B, bReqT=0xC0, wVal=0x%04X, wInd=0x%04X\n", + value, index); + rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), + 0x0B, 0xC0, value, index, buff, 1, 500); + PDEBUG(D_USBO, "rc=%d, ret={0x%02X}", rc, buff[0]); + if (rc < 0) { + PERR("Failed reg_w(0x0B, 0xC0, 0x%04X, 0x%04X) w/ rc %d\n", + value, index, rc); + gspca_dev->usb_err = rc; + return; + } + if (val_reply(gspca_dev, buff, rc)) { + PERR("Bad reply to reg_w(0x0B, 0xC0, 0x%04X, 0x%04X\n", + value, index); + gspca_dev->usb_err = -EIO; + } +} + +static void reg_w_buf(struct gspca_dev *gspca_dev, + const struct cmd *p, int l) +{ + do { + reg_w(gspca_dev, p->value, p->index); + p++; + } while (--l > 0); +} + +static void setexposure(struct gspca_dev *gspca_dev, s32 val) +{ + u16 value; + unsigned int w = gspca_dev->pixfmt.width; + + if (w == 800) + value = val * 5; + else if (w == 1600) + value = val * 3; + else if (w == 3264) + value = val * 3 / 2; + else { + PERR("Invalid width %u\n", w); + gspca_dev->usb_err = -EINVAL; + return; + } + PDEBUG(D_STREAM, "exposure: 0x%04X ms\n", value); + /* Wonder if theres a good reason for sending it twice */ + /* probably not but leave it in because...why not */ + reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_); + reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_); +} + +static int gainify(int in) +{ + /* + * TODO: check if there are any issues with corner cases + * 0x000 (0):0x07F (127): regL + * 0x080 (128) - 0x0FF (255): regM, regL + * 0x100 (256) - max: regH, regM, regL + */ + if (in <= 0x7F) + return 0x1000 | in; + else if (in <= 0xFF) + return 0x1080 | in / 2; + else + return 0x1180 | in / 4; +} + +static void setggain(struct gspca_dev *gspca_dev, u16 global_gain) +{ + u16 normalized; + + normalized = gainify(global_gain); + PDEBUG(D_STREAM, "gain G1/G2 (0x%04X): 0x%04X (src 0x%04X)\n", + REG_GREEN1_GAIN, + normalized, global_gain); + + reg_w(gspca_dev, normalized, REG_GREEN1_GAIN); + reg_w(gspca_dev, normalized, REG_GREEN2_GAIN); +} + +static void setbgain(struct gspca_dev *gspca_dev, + u16 gain, u16 global_gain) +{ + u16 normalized; + + normalized = global_gain + + ((u32)global_gain) * gain / GAIN_MAX; + if (normalized > GAIN_MAX) { + PDEBUG(D_STREAM, "Truncating blue 0x%04X w/ value 0x%04X\n", + GAIN_MAX, normalized); + normalized = GAIN_MAX; + } + normalized = gainify(normalized); + PDEBUG(D_STREAM, "gain B (0x%04X): 0x%04X w/ source 0x%04X\n", + REG_BLUE_GAIN, normalized, gain); + + reg_w(gspca_dev, normalized, REG_BLUE_GAIN); +} + +static void setrgain(struct gspca_dev *gspca_dev, + u16 gain, u16 global_gain) +{ + u16 normalized; + + normalized = global_gain + + ((u32)global_gain) * gain / GAIN_MAX; + if (normalized > GAIN_MAX) { + PDEBUG(D_STREAM, "Truncating gain 0x%04X w/ value 0x%04X\n", + GAIN_MAX, normalized); + normalized = GAIN_MAX; + } + normalized = gainify(normalized); + PDEBUG(D_STREAM, "gain R (0x%04X): 0x%04X w / source 0x%04X\n", + REG_RED_GAIN, normalized, gain); + + reg_w(gspca_dev, normalized, REG_RED_GAIN); +} + +static void configure_wh(struct gspca_dev *gspca_dev) +{ + unsigned int w = gspca_dev->pixfmt.width; + + PDEBUG(D_STREAM, "configure_wh\n"); + + if (w == 800) { + static const struct cmd reg_init_res[] = { + {0x0060, REG_X_ADDR_START}, + {0x0CD9, REG_X_ADDR_END}, + {0x0036, REG_Y_ADDR_START}, + {0x098F, REG_Y_ADDR_END}, + {0x07C7, REG_READ_MODE}, + }; + + reg_w_buf(gspca_dev, + reg_init_res, ARRAY_SIZE(reg_init_res)); + } else if (w == 1600) { + static const struct cmd reg_init_res[] = { + {0x009C, REG_X_ADDR_START}, + {0x0D19, REG_X_ADDR_END}, + {0x0068, REG_Y_ADDR_START}, + {0x09C5, REG_Y_ADDR_END}, + {0x06C3, REG_READ_MODE}, + }; + + reg_w_buf(gspca_dev, + reg_init_res, ARRAY_SIZE(reg_init_res)); + } else if (w == 3264) { + static const struct cmd reg_init_res[] = { + {0x00E8, REG_X_ADDR_START}, + {0x0DA7, REG_X_ADDR_END}, + {0x009E, REG_Y_ADDR_START}, + {0x0A2D, REG_Y_ADDR_END}, + {0x0241, REG_READ_MODE}, + }; + + reg_w_buf(gspca_dev, + reg_init_res, ARRAY_SIZE(reg_init_res)); + } else { + PERR("bad width %u\n", w); + gspca_dev->usb_err = -EINVAL; + return; + } + + reg_w(gspca_dev, 0x0000, REG_SCALING_MODE); + reg_w(gspca_dev, 0x0010, REG_SCALE_M); + reg_w(gspca_dev, w, REG_X_OUTPUT_SIZE); + reg_w(gspca_dev, gspca_dev->pixfmt.height, REG_Y_OUTPUT_SIZE); + + if (w == 800) { + reg_w(gspca_dev, 0x0384, REG_FRAME_LENGTH_LINES_); + reg_w(gspca_dev, 0x0960, REG_LINE_LENGTH_PCK_); + } else if (w == 1600) { + reg_w(gspca_dev, 0x0640, REG_FRAME_LENGTH_LINES_); + reg_w(gspca_dev, 0x0FA0, REG_LINE_LENGTH_PCK_); + } else if (w == 3264) { + reg_w(gspca_dev, 0x0B4B, REG_FRAME_LENGTH_LINES_); + reg_w(gspca_dev, 0x1F40, REG_LINE_LENGTH_PCK_); + } else { + PERR("bad width %u\n", w); + gspca_dev->usb_err = -EINVAL; + return; + } +} + +/* Packets that were encrypted, no idea if the grouping is significant */ +static void configure_encrypted(struct gspca_dev *gspca_dev) +{ + static const struct cmd reg_init_begin[] = { + {0x0100, REG_SOFTWARE_RESET}, + {0x0000, REG_MODE_SELECT}, + {0x0100, REG_GROUPED_PARAMETER_HOLD}, + {0x0004, REG_VT_PIX_CLK_DIV}, + {0x0001, REG_VT_SYS_CLK_DIV}, + {0x0008, REG_OP_PIX_CLK_DIV}, + {0x0001, REG_OP_SYS_CLK_DIV}, + {0x0004, REG_PRE_PLL_CLK_DIV}, + {0x0040, REG_PLL_MULTIPLIER}, + {0x0000, REG_GROUPED_PARAMETER_HOLD}, + {0x0100, REG_GROUPED_PARAMETER_HOLD}, + }; + static const struct cmd reg_init_end[] = { + {0x0000, REG_GROUPED_PARAMETER_HOLD}, + {0x0301, 0x31AE}, + {0x0805, 0x3064}, + {0x0071, 0x3170}, + {0x10DE, REG_RESET_REGISTER}, + {0x0000, REG_MODE_SELECT}, + {0x0010, REG_PLL_MULTIPLIER}, + {0x0100, REG_MODE_SELECT}, + }; + + PDEBUG(D_STREAM, "Encrypted begin, w = %u\n", gspca_dev->pixfmt.width); + reg_w_buf(gspca_dev, reg_init_begin, ARRAY_SIZE(reg_init_begin)); + configure_wh(gspca_dev); + reg_w_buf(gspca_dev, reg_init_end, ARRAY_SIZE(reg_init_end)); + reg_w(gspca_dev, 0x0100, REG_GROUPED_PARAMETER_HOLD); + reg_w(gspca_dev, 0x0000, REG_GROUPED_PARAMETER_HOLD); + + PDEBUG(D_STREAM, "Encrypted end\n"); +} + +static int configure(struct gspca_dev *gspca_dev) +{ + int rc; + uint8_t buff[4]; + + PDEBUG(D_STREAM, "configure()\n"); + + /* + * First driver sets a sort of encryption key + * A number of futur requests of this type have wValue and wIndex + * encrypted as follows: + * -Compute key = this wValue rotate left by 4 bits + * (decrypt.py rotates right because we are decrypting) + * -Later packets encrypt packets by XOR'ing with key + * XOR encrypt/decrypt is symmetrical + * wValue, and wIndex are encrypted + * bRequest is not and bRequestType is always 0xC0 + * This allows resyncing if key is unknown? + * By setting 0 we XOR with 0 and the shifting and XOR drops out + */ + rc = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), + 0x16, 0xC0, 0x0000, 0x0000, buff, 2, 500); + if (val_reply(gspca_dev, buff, rc)) { + PERR("failed key req"); + return -EIO; + } + + /* + * Next does some sort of 2 packet challenge / response + * evidence suggests its an Atmel I2C crypto part but nobody cares to + * look + * (to make sure its not cloned hardware?) + * Ignore: I want to work with their hardware, not clone it + * 16 bytes out challenge, requestType: 0x40 + * 16 bytes in response, requestType: 0xC0 + */ + + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay packet 176 w/ rc %d\n", rc); + return rc; + } + + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0000, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay packet 178 w/ rc %d\n", rc); + return rc; + } + + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0001, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay packet 180 w/ rc %d\n", rc); + return rc; + } + + /* + * Serial number? Doesn't seem to be required + * cam1: \xE6\x0D\x00\x00, cam2: \x70\x19\x00\x00 + * rc = usb_control_msg(gspca_dev->dev, + * usb_rcvctrlpipe(gspca_dev->dev, 0), + * 0x20, 0xC0, 0x0000, 0x0000, buff, 4, 500); + */ + + /* Large (EEPROM?) read, skip it since no idea what to do with it */ + gspca_dev->usb_err = 0; + configure_encrypted(gspca_dev); + if (gspca_dev->usb_err) + return gspca_dev->usb_err; + + /* Omitted this by accident, does not work without it */ + rc = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), + 0x01, 0x40, 0x0003, 0x000F, NULL, 0, 500); + if (rc < 0) { + PERR("failed to replay final packet w/ rc %d\n", rc); + return rc; + } + + PDEBUG(D_STREAM, "Configure complete\n"); + return 0; +} + +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + gspca_dev->cam.cam_mode = vga_mode; + gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); + + /* Yes we want URBs and we want them now! */ + gspca_dev->cam.no_urb_create = 0; + gspca_dev->cam.bulk_nurbs = 4; + /* Largest size the windows driver uses */ + gspca_dev->cam.bulk_size = BULK_SIZE; + /* Def need to use bulk transfers */ + gspca_dev->cam.bulk = 1; + + return 0; +} + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + sd->this_f = 0; + + rc = configure(gspca_dev); + if (rc < 0) { + PERR("Failed configure"); + return rc; + } + /* First two frames have messed up gains + Drop them to avoid special cases in user apps? */ + return 0; +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (len != BULK_SIZE) { + /* can we finish a frame? */ + if (sd->this_f + len == gspca_dev->pixfmt.sizeimage) { + gspca_frame_add(gspca_dev, LAST_PACKET, data, len); + PDEBUG(D_FRAM, "finish frame sz %u/%u w/ len %u\n", + sd->this_f, gspca_dev->pixfmt.sizeimage, len); + /* lost some data, discard the frame */ + } else { + gspca_frame_add(gspca_dev, DISCARD_PACKET, NULL, 0); + PDEBUG(D_FRAM, "abort frame sz %u/%u w/ len %u\n", + sd->this_f, gspca_dev->pixfmt.sizeimage, len); + } + sd->this_f = 0; + } else { + if (sd->this_f == 0) + gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); + else + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + sd->this_f += len; + } +} + +static int sd_init(struct gspca_dev *gspca_dev) +{ + return 0; +} + +static int sd_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct gspca_dev *gspca_dev = + container_of(ctrl->handler, struct gspca_dev, ctrl_handler); + struct sd *sd = (struct sd *) gspca_dev; + + gspca_dev->usb_err = 0; + + if (!gspca_dev->streaming) + return 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + setexposure(gspca_dev, ctrl->val); + break; + case V4L2_CID_GAIN: + /* gspca_dev->gain automatically updated */ + setggain(gspca_dev, gspca_dev->gain->val); + break; + case V4L2_CID_BLUE_BALANCE: + sd->blue->val = ctrl->val; + setbgain(gspca_dev, sd->blue->val, gspca_dev->gain->val); + break; + case V4L2_CID_RED_BALANCE: + sd->red->val = ctrl->val; + setrgain(gspca_dev, sd->red->val, gspca_dev->gain->val); + break; + } + return gspca_dev->usb_err; +} + +static const struct v4l2_ctrl_ops sd_ctrl_ops = { + .s_ctrl = sd_s_ctrl, +}; + +static int sd_init_controls(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; + + gspca_dev->vdev.ctrl_handler = hdl; + v4l2_ctrl_handler_init(hdl, 4); + + gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + /* Mostly limited by URB timeouts */ + /* XXX: make dynamic based on frame rate? */ + V4L2_CID_EXPOSURE, 0, 800, 1, 350); + gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_GAIN, 0, 511, 1, 128); + sd->blue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 1023, 1, 80); + sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 1023, 1, 295); + + if (hdl->error) { + PERR("Could not initialize controls\n"); + return hdl->error; + } + return 0; +} + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = sd_config, + .init = sd_init, + .init_controls = sd_init_controls, + .start = sd_start, + .pkt_scan = sd_pkt_scan, +}; + +/* Table of supported USB devices */ +static const struct usb_device_id device_table[] = { + /* Commented out devices should be related */ + /* AS: AmScope, TT: ToupTek */ + /* { USB_DEVICE(0x0547, 0x6035) }, TT UCMOS00350KPA */ + /* { USB_DEVICE(0x0547, 0x6130) }, TT UCMOS01300KPA */ + /* { USB_DEVICE(0x0547, 0x6200) }, TT UCMOS02000KPA */ + /* { USB_DEVICE(0x0547, 0x6310) }, TT UCMOS03100KPA */ + /* { USB_DEVICE(0x0547, 0x6510) }, TT UCMOS05100KPA */ + /* { USB_DEVICE(0x0547, 0x6800) }, TT UCMOS08000KPA */ + /* { USB_DEVICE(0x0547, 0x6801) }, TT UCMOS08000KPB */ + { USB_DEVICE(0x0547, 0x6801) }, /* TT UCMOS08000KPB, AS MU800 */ + /* { USB_DEVICE(0x0547, 0x6900) }, TT UCMOS09000KPA */ + /* { USB_DEVICE(0x0547, 0x6901) }, TT UCMOS09000KPB */ + /* { USB_DEVICE(0x0547, 0x6010) }, TT UCMOS10000KPA */ + /* { USB_DEVICE(0x0547, 0x6014) }, TT UCMOS14000KPA */ + /* { USB_DEVICE(0x0547, 0x6131) }, TT UCMOS01300KMA */ + /* { USB_DEVICE(0x0547, 0x6511) }, TT UCMOS05100KMA */ + /* { USB_DEVICE(0x0547, 0x8080) }, TT UHCCD00800KPA */ + /* { USB_DEVICE(0x0547, 0x8140) }, TT UHCCD01400KPA */ + /* { USB_DEVICE(0x0547, 0x8141) }, TT EXCCD01400KPA */ + /* { USB_DEVICE(0x0547, 0x8200) }, TT UHCCD02000KPA */ + /* { USB_DEVICE(0x0547, 0x8201) }, TT UHCCD02000KPB */ + /* { USB_DEVICE(0x0547, 0x8310) }, TT UHCCD03100KPA */ + /* { USB_DEVICE(0x0547, 0x8500) }, TT UHCCD05000KPA */ + /* { USB_DEVICE(0x0547, 0x8510) }, TT UHCCD05100KPA */ + /* { USB_DEVICE(0x0547, 0x8600) }, TT UHCCD06000KPA */ + /* { USB_DEVICE(0x0547, 0x8800) }, TT UHCCD08000KPA */ + /* { USB_DEVICE(0x0547, 0x8315) }, TT UHCCD03150KPA */ + /* { USB_DEVICE(0x0547, 0x7800) }, TT UHCCD00800KMA */ + /* { USB_DEVICE(0x0547, 0x7140) }, TT UHCCD01400KMA */ + /* { USB_DEVICE(0x0547, 0x7141) }, TT UHCCD01400KMB */ + /* { USB_DEVICE(0x0547, 0x7200) }, TT UHCCD02000KMA */ + /* { USB_DEVICE(0x0547, 0x7315) }, TT UHCCD03150KMA */ + { } +}; +MODULE_DEVICE_TABLE(usb, device_table); + +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +static int __init sd_mod_init(void) +{ + int ret; + + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/drivers/media/usb/gspca/vc032x.c b/drivers/media/usb/gspca/vc032x.c index c00ac57de510..b4efb2fb36fa 100644 --- a/drivers/media/usb/gspca/vc032x.c +++ b/drivers/media/usb/gspca/vc032x.c @@ -68,12 +68,12 @@ enum sensors { static const struct v4l2_pix_format vc0321_mode[] = { {320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE, - .bytesperline = 320, + .bytesperline = 320 * 2, .sizeimage = 320 * 240 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE, - .bytesperline = 640, + .bytesperline = 640 * 2, .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, @@ -97,17 +97,17 @@ static const struct v4l2_pix_format vc0323_mode[] = { }; static const struct v4l2_pix_format bi_mode[] = { {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, - .bytesperline = 320, + .bytesperline = 320 * 2, .sizeimage = 320 * 240 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, - .bytesperline = 640, + .bytesperline = 640 * 2, .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {1280, 1024, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, - .bytesperline = 1280, + .bytesperline = 1280 * 2, .sizeimage = 1280 * 1024 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/usb/pvrusb2/pvrusb2-audio.c b/drivers/media/usb/pvrusb2/pvrusb2-audio.c index cc06d5e4adcc..45276c628482 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-audio.c @@ -84,13 +84,3 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) MSP_OUTPUT(MSP_SC_IN_DSP_SCART1), 0); } } - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-audio.h b/drivers/media/usb/pvrusb2/pvrusb2-audio.h index e3e63d750891..27cefb5cb170 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-audio.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-audio.h @@ -25,13 +25,3 @@ #include "pvrusb2-hdw-internal.h" void pvr2_msp3400_subdev_update(struct pvr2_hdw *, struct v4l2_subdev *); #endif /* __PVRUSB2_AUDIO_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c index c8761c71c9d2..924fc4c6019a 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-context.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c @@ -418,14 +418,3 @@ struct pvr2_ioread *pvr2_channel_create_mpeg_stream( pvr2_ioread_set_sync_key(cp,stream_sync_key,sizeof(stream_sync_key)); return cp; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.h b/drivers/media/usb/pvrusb2/pvrusb2-context.h index d657e53bbfa3..1c1d442d9ea3 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-context.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-context.h @@ -83,12 +83,3 @@ int pvr2_context_global_init(void); void pvr2_context_global_done(void); #endif /* __PVRUSB2_CONTEXT_H */ -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c index 88320900dbd4..f82f0f0f2c04 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c @@ -82,14 +82,3 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sd->ops->audio->s_routing(sd, input, 0, 0); } } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h index 53ba548b72a7..86c17bee56f9 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.h @@ -36,13 +36,3 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *, struct v4l2_subdev *); #endif /* __PVRUSB2_AUDIO_CS53L32A_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-ctrl.c b/drivers/media/usb/pvrusb2/pvrusb2-ctrl.c index 7d5a7139a45a..958db170a048 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-ctrl.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-ctrl.c @@ -596,14 +596,3 @@ int pvr2_ctrl_value_to_sym(struct pvr2_ctrl *cptr, } while(0); LOCK_GIVE(cptr->hdw->big_lock); return ret; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-ctrl.h b/drivers/media/usb/pvrusb2/pvrusb2-ctrl.h index 794ff90121c7..c175571868a3 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-ctrl.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-ctrl.h @@ -110,13 +110,3 @@ int pvr2_ctrl_value_to_sym_internal(struct pvr2_ctrl *, unsigned int *len); #endif /* __PVRUSB2_CTRL_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c index c514d0b9ffdc..1a81aa70509b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -152,15 +152,3 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sd->ops->audio->s_routing(sd, (u32)aud_input, 0, 0); } } - - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h index e35c2322a08c..2eed7b7ee25e 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.h @@ -40,13 +40,3 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *, struct v4l2_subdev *sd); #endif /* __PVRUSB2_CX2584X_V4L_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-debug.h b/drivers/media/usb/pvrusb2/pvrusb2-debug.h index be79249f8628..4ef2ebcd97a5 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-debug.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-debug.h @@ -57,13 +57,3 @@ extern int pvrusb2_debug; #endif /* __PVRUSB2_HDW_INTERNAL_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c index 4279ebb811a1..e4022bcb155b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c @@ -322,14 +322,3 @@ int pvr2_debugifc_docmd(struct pvr2_hdw *hdw,const char *buf, return 0; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.h b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.h index 2f8d46761cd0..a8dfc55f136f 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.h @@ -40,13 +40,3 @@ int pvr2_debugifc_docmd(struct pvr2_hdw *, const char *buf_ptr,unsigned int buf_size); #endif /* __PVRUSB2_DEBUGIFC_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c index adc501d3c287..06c4c3dabcde 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c @@ -564,13 +564,3 @@ MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx); - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.h b/drivers/media/usb/pvrusb2/pvrusb2-devattr.h index 273c8d4b3853..5aeefb6a991f 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.h @@ -187,13 +187,3 @@ struct pvr2_device_desc { extern struct usb_device_id pvr2_device_table[]; #endif /* __PVRUSB2_HDW_INTERNAL_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c index 9515f3a68f8f..e1907cd0c3b7 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c @@ -152,13 +152,3 @@ int pvr2_eeprom_analyze(struct pvr2_hdw *hdw) return 0; } - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.h b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.h index cca3216f94cc..f1e33c807f46 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.h @@ -27,13 +27,3 @@ struct pvr2_hdw; int pvr2_eeprom_analyze(struct pvr2_hdw *); #endif /* __PVRUSB2_EEPROM_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-encoder.c b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c index f7702aeeda3f..593b3e9b6bfd 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c @@ -538,14 +538,3 @@ int pvr2_encoder_stop(struct pvr2_hdw *hdw) return status; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-encoder.h b/drivers/media/usb/pvrusb2/pvrusb2-encoder.h index 232fefbcd1ac..a2bfb48f1ecd 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-encoder.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-encoder.h @@ -30,13 +30,3 @@ int pvr2_encoder_start(struct pvr2_hdw *); int pvr2_encoder_stop(struct pvr2_hdw *); #endif /* __PVRUSB2_ENCODER_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h b/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h index 614755ea2ea3..06a15a68bcfd 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h @@ -60,13 +60,3 @@ #define FX2CMD_ONAIR_DTV_POWER_OFF 0xa3u #endif /* _PVRUSB2_FX2_CMD_H_ */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h index 036952f2a3cb..1f9c02801cee 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h @@ -394,13 +394,3 @@ unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *); void pvr2_hdw_status_poll(struct pvr2_hdw *); #endif /* __PVRUSB2_HDW_INTERNAL_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c index 2fd9b5e0e2a9..930593d7028d 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c @@ -2425,22 +2425,18 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, } if (!hdw) goto fail; - init_timer(&hdw->quiescent_timer); - hdw->quiescent_timer.data = (unsigned long)hdw; - hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout; + setup_timer(&hdw->quiescent_timer, pvr2_hdw_quiescent_timeout, + (unsigned long)hdw); - init_timer(&hdw->decoder_stabilization_timer); - hdw->decoder_stabilization_timer.data = (unsigned long)hdw; - hdw->decoder_stabilization_timer.function = - pvr2_hdw_decoder_stabilization_timeout; + setup_timer(&hdw->decoder_stabilization_timer, + pvr2_hdw_decoder_stabilization_timeout, + (unsigned long)hdw); - init_timer(&hdw->encoder_wait_timer); - hdw->encoder_wait_timer.data = (unsigned long)hdw; - hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout; + setup_timer(&hdw->encoder_wait_timer, pvr2_hdw_encoder_wait_timeout, + (unsigned long)hdw); - init_timer(&hdw->encoder_run_timer); - hdw->encoder_run_timer.data = (unsigned long)hdw; - hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout; + setup_timer(&hdw->encoder_run_timer, pvr2_hdw_encoder_run_timeout, + (unsigned long)hdw); hdw->master_state = PVR2_STATE_DEAD; @@ -3680,10 +3676,8 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, hdw->ctl_timeout_flag = 0; hdw->ctl_write_pend_flag = 0; hdw->ctl_read_pend_flag = 0; - init_timer(&timer); + setup_timer(&timer, pvr2_ctl_timeout, (unsigned long)hdw); timer.expires = jiffies + timeout; - timer.data = (unsigned long)hdw; - timer.function = pvr2_ctl_timeout; if (write_len) { hdw->cmd_debug_state = 2; @@ -4035,11 +4029,6 @@ int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw) } -int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *hdw) -{ - return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_OFF); -} - int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) { @@ -4301,9 +4290,8 @@ static int state_eval_encoder_config(struct pvr2_hdw *hdw) the encoder. */ if (!hdw->state_encoder_waitok) { hdw->encoder_wait_timer.expires = - jiffies + - (HZ * TIME_MSEC_ENCODER_WAIT - / 1000); + jiffies + msecs_to_jiffies( + TIME_MSEC_ENCODER_WAIT); add_timer(&hdw->encoder_wait_timer); } } @@ -4426,8 +4414,8 @@ static int state_eval_encoder_run(struct pvr2_hdw *hdw) if (pvr2_encoder_start(hdw) < 0) return !0; hdw->state_encoder_run = !0; if (!hdw->state_encoder_runok) { - hdw->encoder_run_timer.expires = - jiffies + (HZ * TIME_MSEC_ENCODER_OK / 1000); + hdw->encoder_run_timer.expires = jiffies + + msecs_to_jiffies(TIME_MSEC_ENCODER_OK); add_timer(&hdw->encoder_run_timer); } } @@ -4518,9 +4506,8 @@ static int state_eval_decoder_run(struct pvr2_hdw *hdw) but before we did the pending check. */ if (!hdw->state_decoder_quiescent) { hdw->quiescent_timer.expires = - jiffies + - (HZ * TIME_MSEC_DECODER_WAIT - / 1000); + jiffies + msecs_to_jiffies( + TIME_MSEC_DECODER_WAIT); add_timer(&hdw->quiescent_timer); } } @@ -4544,9 +4531,8 @@ static int state_eval_decoder_run(struct pvr2_hdw *hdw) hdw->state_decoder_run = !0; if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) { hdw->decoder_stabilization_timer.expires = - jiffies + - (HZ * TIME_MSEC_DECODER_STABILIZATION_WAIT / - 1000); + jiffies + msecs_to_jiffies( + TIME_MSEC_DECODER_STABILIZATION_WAIT); add_timer(&hdw->decoder_stabilization_timer); } else { hdw->state_decoder_ready = !0; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h index 41847076f51a..a82a00dd7329 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h @@ -271,9 +271,6 @@ int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *); /* Execute simple reset command */ int pvr2_hdw_cmd_powerup(struct pvr2_hdw *); -/* suspend */ -int pvr2_hdw_cmd_powerdown(struct pvr2_hdw *); - /* Order decoder to reset */ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *); @@ -343,13 +340,3 @@ void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw); int pvr2_upload_firmware2(struct pvr2_hdw *hdw); #endif /* __PVRUSB2_HDW_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c index b5e929f1bf82..4baa9d632a4e 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c @@ -686,13 +686,3 @@ void pvr2_i2c_core_done(struct pvr2_hdw *hdw) hdw->i2c_linked = 0; } } - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h index 6a75769200bd..a10a3e8e9345 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.h @@ -27,14 +27,3 @@ void pvr2_i2c_core_done(struct pvr2_hdw *); #endif /* __PVRUSB2_I2C_ADAPTER_H */ - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-io.c b/drivers/media/usb/pvrusb2/pvrusb2-io.c index 1e354747de3f..0c08f22bdfce 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-io.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-io.c @@ -682,14 +682,3 @@ int pvr2_buffer_get_id(struct pvr2_buffer *bp) { return bp->id; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-io.h b/drivers/media/usb/pvrusb2/pvrusb2-io.h index afb7e87c0394..0c47c6a95ab2 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-io.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-io.h @@ -90,13 +90,3 @@ int pvr2_buffer_get_id(struct pvr2_buffer *); int pvr2_buffer_queue(struct pvr2_buffer *); #endif /* __PVRUSB2_IO_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-ioread.c b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c index bba6115c9ae8..cd995b54732e 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-ioread.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c @@ -499,14 +499,3 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt) cp,req_cnt,ret); return ret; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-ioread.h b/drivers/media/usb/pvrusb2/pvrusb2-ioread.h index 100e0780e1aa..0b1f0fbc3438 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-ioread.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-ioread.h @@ -36,13 +36,3 @@ int pvr2_ioread_read(struct pvr2_ioread *,void __user *buf,unsigned int cnt); int pvr2_ioread_avail(struct pvr2_ioread *); #endif /* __PVRUSB2_IOREAD_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-main.c b/drivers/media/usb/pvrusb2/pvrusb2-main.c index c1d9bb61cd77..86be902a0049 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-main.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-main.c @@ -169,14 +169,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION("0.9.1"); - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-std.c b/drivers/media/usb/pvrusb2/pvrusb2-std.c index 453627b07833..9a596a3a4c27 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-std.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-std.c @@ -398,14 +398,3 @@ v4l2_std_id pvr2_std_get_usable(void) { return CSTD_ALL; } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-std.h b/drivers/media/usb/pvrusb2/pvrusb2-std.h index a35c53d0b320..ed4ec0474429 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-std.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-std.h @@ -47,13 +47,3 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr, v4l2_std_id pvr2_std_get_usable(void); #endif /* __PVRUSB2_STD_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c index 6ef1335b2858..06fe63ced58c 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c @@ -848,14 +848,3 @@ static ssize_t debugcmd_store(struct device *class_dev, return count; } #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */ - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-sysfs.h b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.h index 6d875bfe7991..6f0579e1e07b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-sysfs.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.h @@ -34,13 +34,3 @@ struct pvr2_sysfs *pvr2_sysfs_create(struct pvr2_context *, struct pvr2_sysfs_class *); #endif /* __PVRUSB2_SYSFS_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-util.h b/drivers/media/usb/pvrusb2/pvrusb2-util.h index 92b75544ee2e..5465bf9cd73e 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-util.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-util.h @@ -50,13 +50,3 @@ #endif /* __PVRUSB2_UTIL_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c index 536210b39428..35e4ea530494 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c @@ -1362,13 +1362,3 @@ struct pvr2_v4l2 *pvr2_v4l2_create(struct pvr2_context *mnp) pvr2_v4l2_destroy_no_lock(vp); return NULL; } - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.h b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.h index 34c011a7b107..e455c9515841 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.h @@ -27,13 +27,3 @@ struct pvr2_v4l2; struct pvr2_v4l2 *pvr2_v4l2_create(struct pvr2_context *); #endif /* __PVRUSB2_V4L2_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c index 2e205c99eb96..139b39740534 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c @@ -101,14 +101,3 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sd->ops->video->s_routing(sd, input, 0, 0); } } - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h index 3b0bd5db602b..dacf3ec7f9e1 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.h @@ -36,13 +36,3 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *, struct v4l2_subdev *); #endif /* __PVRUSB2_VIDEO_V4L_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c index 3ac8d751a5c0..f1df94a2436f 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c @@ -56,15 +56,3 @@ void pvr2_wm8775_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sd->ops->audio->s_routing(sd, input, 0, 0); } } - - - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.h b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.h index 0577bc7246fb..a4ee12e28d5c 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.h +++ b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.h @@ -40,13 +40,3 @@ void pvr2_wm8775_subdev_update(struct pvr2_hdw *, struct v4l2_subdev *sd); #endif /* __PVRUSB2_WM8775_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pvrusb2/pvrusb2.h b/drivers/media/usb/pvrusb2/pvrusb2.h index 240de9b35661..95f98a87abb3 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2.h +++ b/drivers/media/usb/pvrusb2/pvrusb2.h @@ -30,13 +30,3 @@ #define PVR_NUM 20 #endif /* __PVRUSB2_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 70 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c index 15b754da4a2c..702267e208ba 100644 --- a/drivers/media/usb/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -508,7 +508,8 @@ static void pwc_isoc_cleanup(struct pwc_device *pdev) } /* Must be called with vb_queue_lock hold */ -static void pwc_cleanup_queued_bufs(struct pwc_device *pdev) +static void pwc_cleanup_queued_bufs(struct pwc_device *pdev, + enum vb2_buffer_state state) { unsigned long flags = 0; @@ -519,7 +520,7 @@ static void pwc_cleanup_queued_bufs(struct pwc_device *pdev) buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, list); list_del(&buf->list); - vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + vb2_buffer_done(&buf->vb, state); } spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags); } @@ -674,7 +675,7 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) pwc_set_leds(pdev, 0, 0); pwc_camera_power(pdev, 0); /* And cleanup any queued bufs!! */ - pwc_cleanup_queued_bufs(pdev); + pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED); } mutex_unlock(&pdev->v4l2_lock); @@ -692,7 +693,9 @@ static void stop_streaming(struct vb2_queue *vq) pwc_isoc_cleanup(pdev); } - pwc_cleanup_queued_bufs(pdev); + pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_ERROR); + if (pdev->fill_buf) + vb2_buffer_done(&pdev->fill_buf->vb, VB2_BUF_STATE_ERROR); mutex_unlock(&pdev->v4l2_lock); } @@ -1125,7 +1128,6 @@ static void usb_pwc_disconnect(struct usb_interface *intf) if (pdev->vb_queue.streaming) pwc_isoc_cleanup(pdev); pdev->udev = NULL; - pwc_cleanup_queued_bufs(pdev); v4l2_device_disconnect(&pdev->v4l2_dev); video_unregister_device(&pdev->vdev); diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c index de55e96fed15..0f3c34d47ec3 100644 --- a/drivers/media/usb/s2255/s2255drv.c +++ b/drivers/media/usb/s2255/s2255drv.c @@ -2274,9 +2274,7 @@ static int s2255_probe(struct usb_interface *interface, dev_err(&interface->dev, "Could not find bulk-in endpoint\n"); goto errorEP; } - init_timer(&dev->timer); - dev->timer.function = s2255_timer; - dev->timer.data = (unsigned long)dev->fw_data; + setup_timer(&dev->timer, s2255_timer, (unsigned long)dev->fw_data); init_waitqueue_head(&dev->fw_data->wait_fw); for (i = 0; i < MAX_CHANNELS; i++) { struct s2255_vc *vc = &dev->vc[i]; diff --git a/drivers/media/usb/siano/Kconfig b/drivers/media/usb/siano/Kconfig index 5afbd9a4b55c..d37b742d4f7a 100644 --- a/drivers/media/usb/siano/Kconfig +++ b/drivers/media/usb/siano/Kconfig @@ -5,7 +5,9 @@ config SMS_USB_DRV tristate "Siano SMS1xxx based MDTV receiver" depends on DVB_CORE && HAS_DMA + depends on !RC_CORE || RC_CORE select MEDIA_COMMON_OPTIONS + select SMS_SIANO_MDTV ---help--- Choose if you would like to have Siano's support for USB interface diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c index a47629108c1b..65a326c5128f 100644 --- a/drivers/media/usb/stk1160/stk1160-v4l.c +++ b/drivers/media/usb/stk1160/stk1160-v4l.c @@ -38,10 +38,6 @@ #include "stk1160.h" #include "stk1160-reg.h" -static unsigned int vidioc_debug; -module_param(vidioc_debug, int, 0644); -MODULE_PARM_DESC(vidioc_debug, "enable debug messages [vidioc]"); - static bool keep_buffers; module_param(keep_buffers, bool, 0644); MODULE_PARM_DESC(keep_buffers, "don't release buffers upon stop streaming"); @@ -659,7 +655,6 @@ int stk1160_video_register(struct stk1160 *dev) /* Initialize video_device with a template structure */ dev->vdev = v4l_template; - dev->vdev.debug = vidioc_debug; dev->vdev.queue = &dev->vb_vidq; /* diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index 3588dc38db87..e08fa587332f 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -1262,7 +1262,6 @@ static int stk_register_video_device(struct stk_camera *dev) dev->vdev = stk_v4l_data; dev->vdev.lock = &dev->lock; - dev->vdev.debug = debug; dev->vdev.v4l2_dev = &dev->v4l2_dev; video_set_drvdata(&dev->vdev, dev); err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c index 793577fc4633..0f14d3ccc7b4 100644 --- a/drivers/media/usb/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -941,7 +941,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, fmt = format_by_fourcc(f->fmt.pix.pixelformat); if (NULL == fmt) { - dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Fourcc format (0x%08x)" + dprintk(dev, 2, "Fourcc format (0x%08x)" " invalid.\n", f->fmt.pix.pixelformat); return -EINVAL; } @@ -1622,7 +1622,6 @@ static struct video_device *vdev_init(struct tm6000_core *dev, *vfd = *template; vfd->v4l2_dev = &dev->v4l2_dev; vfd->release = video_device_release; - vfd->debug = tm6000_debug; vfd->lock = &dev->lock; snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c index 302aa07c458f..44b0c28d69b6 100644 --- a/drivers/media/usb/usbvision/usbvision-core.c +++ b/drivers/media/usb/usbvision/usbvision-core.c @@ -2194,9 +2194,8 @@ static void usbvision_power_off_timer(unsigned long data) void usbvision_init_power_off_timer(struct usb_usbvision *usbvision) { - init_timer(&usbvision->power_off_timer); - usbvision->power_off_timer.data = (long)usbvision; - usbvision->power_off_timer.function = usbvision_power_off_timer; + setup_timer(&usbvision->power_off_timer, usbvision_power_off_timer, + (unsigned long)usbvision); } void usbvision_set_power_off_timer(struct usb_usbvision *usbvision) @@ -2502,11 +2501,3 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel) usbvision_set_audio(usbvision, audio[channel]); return 0; } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/usbvision/usbvision-i2c.c b/drivers/media/usb/usbvision/usbvision-i2c.c index ba262a32bd3a..26dbcb1146af 100644 --- a/drivers/media/usb/usbvision/usbvision-i2c.c +++ b/drivers/media/usb/usbvision/usbvision-i2c.c @@ -445,11 +445,3 @@ static struct i2c_adapter i2c_adap_template = { .owner = THIS_MODULE, .name = "usbvision", }; - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c index 693d5f409138..cd2fbf11e3b4 100644 --- a/drivers/media/usb/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -1716,11 +1716,3 @@ static void __exit usbvision_exit(void) module_init(usbvision_init); module_exit(usbvision_exit); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/usbvision/usbvision.h b/drivers/media/usb/usbvision/usbvision.h index a0c73cf1517c..77aeb1ed9a81 100644 --- a/drivers/media/usb/usbvision/usbvision.h +++ b/drivers/media/usb/usbvision/usbvision.h @@ -517,11 +517,3 @@ int usbvision_power_off(struct usb_usbvision *usbvision); int usbvision_power_on(struct usb_usbvision *usbvision); #endif /* __LINUX_USBVISION_H */ - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 6a4b0b8cd270..cf27006c29dc 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -138,6 +138,11 @@ static struct uvc_format_desc uvc_fmts[] = { .fcc = V4L2_PIX_FMT_RGB565, }, { + .name = "BGR 8:8:8 (BGR3)", + .guid = UVC_GUID_FORMAT_BGR3, + .fcc = V4L2_PIX_FMT_BGR24, + }, + { .name = "H.264", .guid = UVC_GUID_FORMAT_H264, .fcc = V4L2_PIX_FMT_H264, diff --git a/drivers/media/usb/uvc/uvc_queue.c b/drivers/media/usb/uvc/uvc_queue.c index cc960723b926..10c554e7655c 100644 --- a/drivers/media/usb/uvc/uvc_queue.c +++ b/drivers/media/usb/uvc/uvc_queue.c @@ -143,20 +143,6 @@ static void uvc_buffer_finish(struct vb2_buffer *vb) uvc_video_clock_update(stream, &vb->v4l2_buf, buf); } -static void uvc_wait_prepare(struct vb2_queue *vq) -{ - struct uvc_video_queue *queue = vb2_get_drv_priv(vq); - - mutex_unlock(&queue->mutex); -} - -static void uvc_wait_finish(struct vb2_queue *vq) -{ - struct uvc_video_queue *queue = vb2_get_drv_priv(vq); - - mutex_lock(&queue->mutex); -} - static int uvc_start_streaming(struct vb2_queue *vq, unsigned int count) { struct uvc_video_queue *queue = vb2_get_drv_priv(vq); @@ -195,8 +181,8 @@ static struct vb2_ops uvc_queue_qops = { .buf_prepare = uvc_buffer_prepare, .buf_queue = uvc_buffer_queue, .buf_finish = uvc_buffer_finish, - .wait_prepare = uvc_wait_prepare, - .wait_finish = uvc_wait_finish, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, .start_streaming = uvc_start_streaming, .stop_streaming = uvc_stop_streaming, }; @@ -214,6 +200,7 @@ int uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, queue->queue.mem_ops = &vb2_vmalloc_memops; queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC | V4L2_BUF_FLAG_TSTAMP_SRC_SOE; + queue->queue.lock = &queue->mutex; ret = vb2_queue_init(&queue->queue); if (ret) return ret; diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 9c5cbcf16529..43e953f73e02 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -13,7 +13,6 @@ #include <linux/compat.h> #include <linux/kernel.h> -#include <linux/version.h> #include <linux/list.h> #include <linux/module.h> #include <linux/slab.h> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 9637e8b86949..20ccc9d315dc 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1734,13 +1734,13 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) uvc_video_clock_reset(stream); + if (!uvc_queue_streaming(&stream->queue)) + return 0; + ret = uvc_commit_video(stream, &stream->ctrl); if (ret < 0) return ret; - if (!uvc_queue_streaming(&stream->queue)) - return 0; - return uvc_init_video(stream, GFP_NOIO); } diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index f0a04b532ede..c63e5b55e143 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -109,6 +109,9 @@ #define UVC_GUID_FORMAT_RGBP \ { 'R', 'G', 'B', 'P', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BGR3 \ + { 0x7d, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \ + 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70} #define UVC_GUID_FORMAT_M420 \ { 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c index 5c006277b8b1..ca850316d379 100644 --- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -1454,8 +1454,6 @@ static int zr364xx_probe(struct usb_interface *intf, cam->vdev.v4l2_dev = &cam->v4l2_dev; cam->vdev.ctrl_handler = &cam->ctrl_handler; video_set_drvdata(&cam->vdev, cam); - if (debug) - cam->vdev.debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; cam->udev = udev; |