Merge tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Some documentation updates and a few new pixel formats

 - Stop btcx-risc abuse by cx88 and move it to bt8xx driver

 - New platform driver: am437x

 - New webcam driver: toptek

 - New remote controller hardware protocols added to img-ir driver

 - Removal of a few very old drivers that relies on old kABIs and are
   for very hard to find hardware: parallel port webcam drivers
   (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino)

 - Removal of the USB Telegent driver (tlg2300).  The company that
   developed this driver has long gone and the hardware is hard to find.
   As it relies on a legacy set of kABI symbols and nobody seems to care
   about it, remove it.

 - several improvements at rtl2832 driver

 - conversion on cx28521 and au0828 to use videobuf2 (VB2)

 - several improvements, fixups and board additions

* tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  [media] dvb_net: Convert local hex dump to print_hex_dump_debug
  [media] dvb_net: Use standard debugging facilities
  [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses
  [media] staging: lirc_serial: adjust boolean assignments
  [media] stb0899: use sign_extend32() for sign extension
  [media] si2168: add support for 1.7MHz bandwidth
  [media] si2168: return error if set_frontend is called with invalid parameters
  [media] lirc_dev: avoid potential null-dereference
  [media] mn88472: simplify bandwidth registers setting code
  [media] dvb: tc90522: re-add symbol-rate report
  [media] lmedm04: add read snr, signal strength and ber call backs
  [media] lmedm04: Create frontend call back for read status
  [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks
  [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb
  [media] lmedm04: Increase Interupt due time to 200 msec
  [media] cx88-dvb: whitespace cleanup
  [media] rtl28xxu: properly initialize pdata
  [media] rtl2832: declare functions as static
  [media] rtl2830: declare functions as static
  [media] rtl2832_sdr: add kernel-doc comments for platform_data
  ...

14 files changed, 393 insertions, 63 deletions

diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
index 580715c7fc5e..a896d3c83a1c 100644
--- a/drivers/media/rc/img-ir/Kconfig
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -60,3 +60,18 @@ config IR_IMG_SANYO
 	help
 	   Say Y here to enable support for the Sanyo protocol (used by Sanyo,
 	   Aiwa, Chinon remotes) in the ImgTec infrared decoder block.
+
+config IR_IMG_RC5
+	bool "Philips RC5 protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the RC5 protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_RC6
+	bool "Philips RC6 protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the RC6 protocol in the ImgTec
+	   infrared decoder block.
+	   Note: This version only supports mode 0.
diff --git a/drivers/media/rc/img-ir/Makefile b/drivers/media/rc/img-ir/Makefile
index 92a459d99509..8e6d458e66ad 100644
--- a/drivers/media/rc/img-ir/Makefile
+++ b/drivers/media/rc/img-ir/Makefile
@@ -6,6 +6,8 @@ img-ir-$(CONFIG_IR_IMG_JVC)	+= img-ir-jvc.o
 img-ir-$(CONFIG_IR_IMG_SONY)	+= img-ir-sony.o
 img-ir-$(CONFIG_IR_IMG_SHARP)	+= img-ir-sharp.o
 img-ir-$(CONFIG_IR_IMG_SANYO)	+= img-ir-sanyo.o
+img-ir-$(CONFIG_IR_IMG_RC5)	+= img-ir-rc5.o
+img-ir-$(CONFIG_IR_IMG_RC6)	+= img-ir-rc6.o
 img-ir-objs			:= $(img-ir-y)
 
 obj-$(CONFIG_IR_IMG)		+= img-ir.o
diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
index 2fd47c9bf5d8..7bb71bc9f534 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.c
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -42,6 +42,12 @@ static struct img_ir_decoder *img_ir_decoders[] = {
 #ifdef CONFIG_IR_IMG_SANYO
 	&img_ir_sanyo,
 #endif
+#ifdef CONFIG_IR_IMG_RC5
+	&img_ir_rc5,
+#endif
+#ifdef CONFIG_IR_IMG_RC6
+	&img_ir_rc6,
+#endif
 	NULL
 };
 
@@ -52,6 +58,11 @@ static struct img_ir_decoder *img_ir_decoders[] = {
 
 #define IMG_IR_QUIRK_CODE_BROKEN	0x1	/* Decode is broken */
 #define IMG_IR_QUIRK_CODE_LEN_INCR	0x2	/* Bit length needs increment */
+/*
+ * The decoder generates rapid interrupts without actually having
+ * received any new data after an incomplete IR code is decoded.
+ */
+#define IMG_IR_QUIRK_CODE_IRQ		0x4
 
 /* functions for preprocessing timings, ensuring max is set */
 
@@ -542,6 +553,7 @@ static void img_ir_set_decoder(struct img_ir_priv *priv,
 	 */
 	spin_unlock_irq(&priv->lock);
 	del_timer_sync(&hw->end_timer);
+	del_timer_sync(&hw->suspend_timer);
 	spin_lock_irq(&priv->lock);
 
 	hw->stopping = false;
@@ -806,20 +818,24 @@ static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw)
 	struct img_ir_priv_hw *hw = &priv->hw;
 	const struct img_ir_decoder *dec = hw->decoder;
 	int ret = IMG_IR_SCANCODE;
-	u32 scancode;
-	enum rc_type protocol = RC_TYPE_UNKNOWN;
+	struct img_ir_scancode_req request;
+
+	request.protocol = RC_TYPE_UNKNOWN;
+	request.toggle   = 0;
 
 	if (dec->scancode)
-		ret = dec->scancode(len, raw, &protocol, &scancode, hw->enabled_protocols);
+		ret = dec->scancode(len, raw, hw->enabled_protocols, &request);
 	else if (len >= 32)
-		scancode = (u32)raw;
+		request.scancode = (u32)raw;
 	else if (len < 32)
-		scancode = (u32)raw & ((1 << len)-1);
+		request.scancode = (u32)raw & ((1 << len)-1);
 	dev_dbg(priv->dev, "data (%u bits) = %#llx\n",
 		len, (unsigned long long)raw);
 	if (ret == IMG_IR_SCANCODE) {
-		dev_dbg(priv->dev, "decoded scan code %#x\n", scancode);
-		rc_keydown(hw->rdev, protocol, scancode, 0);
+		dev_dbg(priv->dev, "decoded scan code %#x, toggle %u\n",
+			request.scancode, request.toggle);
+		rc_keydown(hw->rdev, request.protocol, request.scancode,
+			   request.toggle);
 		img_ir_end_repeat(priv);
 	} else if (ret == IMG_IR_REPEATCODE) {
 		if (hw->mode == IMG_IR_M_REPEATING) {
@@ -857,6 +873,29 @@ static void img_ir_end_timer(unsigned long arg)
 	spin_unlock_irq(&priv->lock);
 }
 
+/*
+ * Timer function to re-enable the current protocol after it had been
+ * cleared when invalid interrupts were generated due to a quirk in the
+ * img-ir decoder.
+ */
+static void img_ir_suspend_timer(unsigned long arg)
+{
+	struct img_ir_priv *priv = (struct img_ir_priv *)arg;
+
+	spin_lock_irq(&priv->lock);
+	/*
+	 * Don't overwrite enabled valid/match IRQs if they have already been
+	 * changed by e.g. a filter change.
+	 */
+	if ((priv->hw.quirk_suspend_irq & IMG_IR_IRQ_EDGE) ==
+				img_ir_read(priv, IMG_IR_IRQ_ENABLE))
+		img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+					priv->hw.quirk_suspend_irq);
+	/* enable */
+	img_ir_write(priv, IMG_IR_CONTROL, priv->hw.reg_timings.ctrl);
+	spin_unlock_irq(&priv->lock);
+}
+
 #ifdef CONFIG_COMMON_CLK
 static void img_ir_change_frequency(struct img_ir_priv *priv,
 				    struct clk_notifier_data *change)
@@ -922,15 +961,38 @@ void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
 	if (!hw->decoder)
 		return;
 
+	ct = hw->decoder->control.code_type;
+
 	ir_status = img_ir_read(priv, IMG_IR_STATUS);
-	if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)))
+	if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) {
+		if (!(priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_IRQ) ||
+				hw->stopping)
+			return;
+		/*
+		 * The below functionality is added as a work around to stop
+		 * multiple Interrupts generated when an incomplete IR code is
+		 * received by the decoder.
+		 * The decoder generates rapid interrupts without actually
+		 * having received any new data. After a single interrupt it's
+		 * expected to clear up, but instead multiple interrupts are
+		 * rapidly generated. only way to get out of this loop is to
+		 * reset the control register after a short delay.
+		 */
+		img_ir_write(priv, IMG_IR_CONTROL, 0);
+		hw->quirk_suspend_irq = img_ir_read(priv, IMG_IR_IRQ_ENABLE);
+		img_ir_write(priv, IMG_IR_IRQ_ENABLE,
+			     hw->quirk_suspend_irq & IMG_IR_IRQ_EDGE);
+
+		/* Timer activated to re-enable the protocol. */
+		mod_timer(&hw->suspend_timer,
+			  jiffies + msecs_to_jiffies(5));
 		return;
+	}
 	ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2);
 	img_ir_write(priv, IMG_IR_STATUS, ir_status);
 
 	len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT;
 	/* some versions report wrong length for certain code types */
-	ct = hw->decoder->control.code_type;
 	if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR)
 		++len;
 
@@ -972,7 +1034,7 @@ static void img_ir_probe_hw_caps(struct img_ir_priv *priv)
 	hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN]
 		|= IMG_IR_QUIRK_CODE_LEN_INCR;
 	hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE]
-		|= IMG_IR_QUIRK_CODE_BROKEN;
+		|= IMG_IR_QUIRK_CODE_IRQ;
 	hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS]
 		|= IMG_IR_QUIRK_CODE_BROKEN;
 }
@@ -991,6 +1053,8 @@ int img_ir_probe_hw(struct img_ir_priv *priv)
 
 	/* Set up the end timer */
 	setup_timer(&hw->end_timer, img_ir_end_timer, (unsigned long)priv);
+	setup_timer(&hw->suspend_timer, img_ir_suspend_timer,
+				(unsigned long)priv);
 
 	/* Register a clock notifier */
 	if (!IS_ERR(priv->clk)) {
diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
index 5c2b216c5fe3..91a297731661 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.h
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -133,6 +133,20 @@ struct img_ir_timing_regvals {
 #define IMG_IR_REPEATCODE	1	/* repeat the previous code */
 
 /**
+ * struct img_ir_scancode_req - Scancode request data.
+ * @protocol:	Protocol code of received message (defaults to
+ *		RC_TYPE_UNKNOWN).
+ * @scancode:	Scan code of received message (must be written by
+ *		handler if IMG_IR_SCANCODE is returned).
+ * @toggle:	Toggle bit (defaults to 0).
+ */
+struct img_ir_scancode_req {
+	enum rc_type protocol;
+	u32 scancode;
+	u8 toggle;
+};
+
+/**
  * struct img_ir_decoder - Decoder settings for an IR protocol.
  * @type:	Protocol types bitmap.
  * @tolerance:	Timing tolerance as a percentage (default 10%).
@@ -162,8 +176,8 @@ struct img_ir_decoder {
 	struct img_ir_control		control;
 
 	/* scancode logic */
-	int (*scancode)(int len, u64 raw, enum rc_type *protocol,
-			u32 *scancode, u64 enabled_protocols);
+	int (*scancode)(int len, u64 raw, u64 enabled_protocols,
+			struct img_ir_scancode_req *request);
 	int (*filter)(const struct rc_scancode_filter *in,
 		      struct img_ir_filter *out, u64 protocols);
 };
@@ -173,6 +187,8 @@ extern struct img_ir_decoder img_ir_jvc;
 extern struct img_ir_decoder img_ir_sony;
 extern struct img_ir_decoder img_ir_sharp;
 extern struct img_ir_decoder img_ir_sanyo;
+extern struct img_ir_decoder img_ir_rc5;
+extern struct img_ir_decoder img_ir_rc6;
 
 /**
  * struct img_ir_reg_timings - Reg values for decoder timings at clock rate.
@@ -204,6 +220,7 @@ enum img_ir_mode {
  * @rdev:		Remote control device
  * @clk_nb:		Notifier block for clock notify events.
  * @end_timer:		Timer until repeat timeout.
+ * @suspend_timer:	Timer to re-enable protocol.
  * @decoder:		Current decoder settings.
  * @enabled_protocols:	Currently enabled protocols.
  * @clk_hz:		Current core clock rate in Hz.
@@ -214,12 +231,14 @@ enum img_ir_mode {
  * @stopping:		Indicates that decoder is being taken down and timers
  *			should not be restarted.
  * @suspend_irqen:	Saved IRQ enable mask over suspend.
+ * @quirk_suspend_irq:	Saved IRQ enable mask over quirk suspend timer.
  */
 struct img_ir_priv_hw {
 	unsigned int			ct_quirks[4];
 	struct rc_dev			*rdev;
 	struct notifier_block		clk_nb;
 	struct timer_list		end_timer;
+	struct timer_list		suspend_timer;
 	const struct img_ir_decoder	*decoder;
 	u64				enabled_protocols;
 	unsigned long			clk_hz;
@@ -230,6 +249,7 @@ struct img_ir_priv_hw {
 	enum img_ir_mode		mode;
 	bool				stopping;
 	u32				suspend_irqen;
+	u32				quirk_suspend_irq;
 };
 
 static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
diff --git a/drivers/media/rc/img-ir/img-ir-jvc.c b/drivers/media/rc/img-ir/img-ir-jvc.c
index a60dda8bf706..d3e2fc0bcfe1 100644
--- a/drivers/media/rc/img-ir/img-ir-jvc.c
+++ b/drivers/media/rc/img-ir/img-ir-jvc.c
@@ -12,8 +12,8 @@
 #include "img-ir-hw.h"
 
 /* Convert JVC data to a scancode */
-static int img_ir_jvc_scancode(int len, u64 raw, enum rc_type *protocol,
-			       u32 *scancode, u64 enabled_protocols)
+static int img_ir_jvc_scancode(int len, u64 raw, u64 enabled_protocols,
+			       struct img_ir_scancode_req *request)
 {
 	unsigned int cust, data;
 
@@ -23,8 +23,8 @@ static int img_ir_jvc_scancode(int len, u64 raw, enum rc_type *protocol,
 	cust = (raw >> 0) & 0xff;
 	data = (raw >> 8) & 0xff;
 
-	*protocol = RC_TYPE_JVC;
-	*scancode = cust << 8 | data;
+	request->protocol = RC_TYPE_JVC;
+	request->scancode = cust << 8 | data;
 	return IMG_IR_SCANCODE;
 }
 
diff --git a/drivers/media/rc/img-ir/img-ir-nec.c b/drivers/media/rc/img-ir/img-ir-nec.c
index 739897549b5b..27a7ea8f1260 100644
--- a/drivers/media/rc/img-ir/img-ir-nec.c
+++ b/drivers/media/rc/img-ir/img-ir-nec.c
@@ -13,8 +13,8 @@
 #include <linux/bitrev.h>
 
 /* Convert NEC data to a scancode */
-static int img_ir_nec_scancode(int len, u64 raw, enum rc_type *protocol,
-			       u32 *scancode, u64 enabled_protocols)
+static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols,
+			       struct img_ir_scancode_req *request)
 {
 	unsigned int addr, addr_inv, data, data_inv;
 	/* a repeat code has no data */
@@ -30,23 +30,23 @@ static int img_ir_nec_scancode(int len, u64 raw, enum rc_type *protocol,
 	if ((data_inv ^ data) != 0xff) {
 		/* 32-bit NEC (used by Apple and TiVo remotes) */
 		/* scan encoding: as transmitted, MSBit = first received bit */
-		*scancode = bitrev8(addr)     << 24 |
-			    bitrev8(addr_inv) << 16 |
-			    bitrev8(data)     <<  8 |
-			    bitrev8(data_inv);
+		request->scancode = bitrev8(addr)     << 24 |
+				bitrev8(addr_inv) << 16 |
+				bitrev8(data)     <<  8 |
+				bitrev8(data_inv);
 	} else if ((addr_inv ^ addr) != 0xff) {
 		/* Extended NEC */
 		/* scan encoding: AAaaDD */
-		*scancode = addr     << 16 |
-			    addr_inv <<  8 |
-			    data;
+		request->scancode = addr     << 16 |
+				addr_inv <<  8 |
+				data;
 	} else {
 		/* Normal NEC */
 		/* scan encoding: AADD */
-		*scancode = addr << 8 |
-			    data;
+		request->scancode = addr << 8 |
+				data;
 	}
-	*protocol = RC_TYPE_NEC;
+	request->protocol = RC_TYPE_NEC;
 	return IMG_IR_SCANCODE;
 }
 
diff --git a/drivers/media/rc/img-ir/img-ir-rc5.c b/drivers/media/rc/img-ir/img-ir-rc5.c
new file mode 100644
index 000000000000..a8a28a377eee
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc5.c
@@ -0,0 +1,88 @@
+/*
+ * ImgTec IR Decoder setup for Philips RC-5 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC5 data to a scancode */
+static int img_ir_rc5_scancode(int len, u64 raw, u64 enabled_protocols,
+				struct img_ir_scancode_req *request)
+{
+	unsigned int addr, cmd, tgl, start;
+
+	/* Quirk in the decoder shifts everything by 2 to the left. */
+	raw   >>= 2;
+
+	start	=  (raw >> 13)	& 0x01;
+	tgl	=  (raw >> 11)	& 0x01;
+	addr	=  (raw >>  6)	& 0x1f;
+	cmd	=   raw		& 0x3f;
+	/*
+	 * 12th bit is used to extend the command in extended RC5 and has
+	 * no effect on standard RC5.
+	 */
+	cmd	+= ((raw >> 12) & 0x01) ? 0 : 0x40;
+
+	if (!start)
+		return -EINVAL;
+
+	request->protocol = RC_TYPE_RC5;
+	request->scancode = addr << 8 | cmd;
+	request->toggle   = tgl;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert RC5 scancode to RC5 data filter */
+static int img_ir_rc5_filter(const struct rc_scancode_filter *in,
+				 struct img_ir_filter *out, u64 protocols)
+{
+	/* Not supported by the hw. */
+	return -EINVAL;
+}
+
+/*
+ * RC-5 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc5.php
+ */
+struct img_ir_decoder img_ir_rc5 = {
+	.type      = RC_BIT_RC5,
+	.control   = {
+		.bitoriend2	= 1,
+		.code_type	= IMG_IR_CODETYPE_BIPHASE,
+		.decodend2	= 1,
+	},
+	/* main timings */
+	.tolerance	= 16,
+	.unit		= 888888, /* 1/36k*32=888.888microseconds */
+	.timings	= {
+		/* 10 symbol */
+		.s10 = {
+			.pulse	= { 1 },
+			.space	= { 1 },
+		},
+
+		/* 11 symbol */
+		.s11 = {
+			.pulse	= { 1 },
+			.space	= { 1 },
+		},
+
+		/* free time */
+		.ft  = {
+			.minlen = 14,
+			.maxlen = 14,
+			.ft_min = 5,
+		},
+	},
+
+	/* scancode logic */
+	.scancode	= img_ir_rc5_scancode,
+	.filter		= img_ir_rc5_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-rc6.c b/drivers/media/rc/img-ir/img-ir-rc6.c
new file mode 100644
index 000000000000..de1e27534968
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc6.c
@@ -0,0 +1,117 @@
+/*
+ * ImgTec IR Decoder setup for Philips RC-6 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC6 data to a scancode */
+static int img_ir_rc6_scancode(int len, u64 raw, u64 enabled_protocols,
+				struct img_ir_scancode_req *request)
+{
+	unsigned int addr, cmd, mode, trl1, trl2;
+
+	/*
+	 * Due to a side effect of the decoder handling the double length
+	 * Trailer bit, the header information is a bit scrambled, and the
+	 * raw data is shifted incorrectly.
+	 * This workaround effectively recovers the header bits.
+	 *
+	 * The Header field should look like this:
+	 *
+	 * StartBit ModeBit2 ModeBit1 ModeBit0 TrailerBit
+	 *
+	 * But what we get is:
+	 *
+	 * ModeBit2 ModeBit1 ModeBit0 TrailerBit1 TrailerBit2
+	 *
+	 * The start bit is not important to recover the scancode.
+	 */
+
+	raw	>>= 27;
+
+	trl1	= (raw >>  17)	& 0x01;
+	trl2	= (raw >>  16)	& 0x01;
+
+	mode	= (raw >>  18)	& 0x07;
+	addr	= (raw >>   8)	& 0xff;
+	cmd	=  raw		& 0xff;
+
+	/*
+	 * Due to the above explained irregularity the trailer bits cannot
+	 * have the same value.
+	 */
+	if (trl1 == trl2)
+		return -EINVAL;
+
+	/* Only mode 0 supported for now */
+	if (mode)
+		return -EINVAL;
+
+	request->protocol = RC_TYPE_RC6_0;
+	request->scancode = addr << 8 | cmd;
+	request->toggle	  = trl2;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert RC6 scancode to RC6 data filter */
+static int img_ir_rc6_filter(const struct rc_scancode_filter *in,
+				 struct img_ir_filter *out, u64 protocols)
+{
+	/* Not supported by the hw. */
+	return -EINVAL;
+}
+
+/*
+ * RC-6 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc6.php
+ */
+struct img_ir_decoder img_ir_rc6 = {
+	.type		= RC_BIT_RC6_0,
+	.control	= {
+		.bitorien	= 1,
+		.code_type	= IMG_IR_CODETYPE_BIPHASE,
+		.decoden	= 1,
+		.decodinpol	= 1,
+	},
+	/* main timings */
+	.tolerance	= 20,
+	/*
+	 * Due to a quirk in the img-ir decoder, default header values do
+	 * not work, the values described below were extracted from
+	 * successful RTL test cases.
+	 */
+	.timings	= {
+		/* leader symbol */
+		.ldr = {
+			.pulse	= { 650 },
+			.space	= { 660 },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse	= { 370 },
+			.space	= { 370 },
+		},
+		/* 01 symbol */
+		.s01 = {
+			.pulse	= { 370 },
+			.space	= { 370 },
+		},
+		/* free time */
+		.ft  = {
+			.minlen = 21,
+			.maxlen = 21,
+			.ft_min = 2666,	/* 2.666 ms */
+		},
+	},
+
+	/* scancode logic */
+	.scancode	= img_ir_rc6_scancode,
+	.filter		= img_ir_rc6_filter,
+};
diff --git a/drivers/media/rc/img-ir/img-ir-sanyo.c b/drivers/media/rc/img-ir/img-ir-sanyo.c
index 6b0653ecdf5a..f394994ffc22 100644
--- a/drivers/media/rc/img-ir/img-ir-sanyo.c
+++ b/drivers/media/rc/img-ir/img-ir-sanyo.c
@@ -23,8 +23,8 @@
 #include "img-ir-hw.h"
 
 /* Convert Sanyo data to a scancode */
-static int img_ir_sanyo_scancode(int len, u64 raw, enum rc_type *protocol,
-				 u32 *scancode, u64 enabled_protocols)
+static int img_ir_sanyo_scancode(int len, u64 raw, u64 enabled_protocols,
+				 struct img_ir_scancode_req *request)
 {
 	unsigned int addr, addr_inv, data, data_inv;
 	/* a repeat code has no data */
@@ -44,8 +44,8 @@ static int img_ir_sanyo_scancode(int len, u64 raw, enum rc_type *protocol,
 		return -EINVAL;
 
 	/* Normal Sanyo */
-	*protocol = RC_TYPE_SANYO;
-	*scancode = addr << 8 | data;
+	request->protocol = RC_TYPE_SANYO;
+	request->scancode = addr << 8 | data;
 	return IMG_IR_SCANCODE;
 }
 
diff --git a/drivers/media/rc/img-ir/img-ir-sharp.c b/drivers/media/rc/img-ir/img-ir-sharp.c
index 3300a38802ac..fe5acc4f030e 100644
--- a/drivers/media/rc/img-ir/img-ir-sharp.c
+++ b/drivers/media/rc/img-ir/img-ir-sharp.c
@@ -12,8 +12,8 @@
 #include "img-ir-hw.h"
 
 /* Convert Sharp data to a scancode */
-static int img_ir_sharp_scancode(int len, u64 raw, enum rc_type *protocol,
-				 u32 *scancode, u64 enabled_protocols)
+static int img_ir_sharp_scancode(int len, u64 raw, u64 enabled_protocols,
+				 struct img_ir_scancode_req *request)
 {
 	unsigned int addr, cmd, exp, chk;
 
@@ -32,8 +32,8 @@ static int img_ir_sharp_scancode(int len, u64 raw, enum rc_type *protocol,
 		/* probably the second half of the message */
 		return -EINVAL;
 
-	*protocol = RC_TYPE_SHARP;
-	*scancode = addr << 8 | cmd;
+	request->protocol = RC_TYPE_SHARP;
+	request->scancode = addr << 8 | cmd;
 	return IMG_IR_SCANCODE;
 }
 
diff --git a/drivers/media/rc/img-ir/img-ir-sony.c b/drivers/media/rc/img-ir/img-ir-sony.c
index 3a0f17b0752c..7f7375f82ed6 100644
--- a/drivers/media/rc/img-ir/img-ir-sony.c
+++ b/drivers/media/rc/img-ir/img-ir-sony.c
@@ -12,8 +12,8 @@
 #include "img-ir-hw.h"
 
 /* Convert Sony data to a scancode */
-static int img_ir_sony_scancode(int len, u64 raw, enum rc_type *protocol,
-				u32 *scancode, u64 enabled_protocols)
+static int img_ir_sony_scancode(int len, u64 raw, u64 enabled_protocols,
+				struct img_ir_scancode_req *request)
 {
 	unsigned int dev, subdev, func;
 
@@ -25,7 +25,7 @@ static int img_ir_sony_scancode(int len, u64 raw, enum rc_type *protocol,
 		raw    >>= 7;
 		dev    = raw & 0x1f;	/* next 5 bits */
 		subdev = 0;
-		*protocol = RC_TYPE_SONY12;
+		request->protocol = RC_TYPE_SONY12;
 		break;
 	case 15:
 		if (!(enabled_protocols & RC_BIT_SONY15))
@@ -34,7 +34,7 @@ static int img_ir_sony_scancode(int len, u64 raw, enum rc_type *protocol,
 		raw    >>= 7;
 		dev    = raw & 0xff;	/* next 8 bits */
 		subdev = 0;
-		*protocol = RC_TYPE_SONY15;
+		request->protocol = RC_TYPE_SONY15;
 		break;
 	case 20:
 		if (!(enabled_protocols & RC_BIT_SONY20))
@@ -44,12 +44,12 @@ static int img_ir_sony_scancode(int len, u64 raw, enum rc_type *protocol,
 		dev    = raw & 0x1f;	/* next 5 bits */
 		raw    >>= 5;
 		subdev = raw & 0xff;	/* next 8 bits */
-		*protocol = RC_TYPE_SONY20;
+		request->protocol = RC_TYPE_SONY20;
 		break;
 	default:
 		return -EINVAL;
 	}
-	*scancode = dev << 16 | subdev << 8 | func;
+	request->scancode = dev << 16 | subdev << 8 | func;
 	return IMG_IR_SCANCODE;
 }
 
diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index 1e0545a67959..4de0e85af805 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -553,14 +553,14 @@ unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
 	if (!ir->attached)
 		return POLLERR;
 
-	poll_wait(file, &ir->buf->wait_poll, wait);
+	if (ir->buf) {
+		poll_wait(file, &ir->buf->wait_poll, wait);
 
-	if (ir->buf)
 		if (lirc_buffer_empty(ir->buf))
 			ret = 0;
 		else
 			ret = POLLIN | POLLRDNORM;
-	else
+	} else
 		ret = POLLERR;
 
 	dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n",
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 86ffcd54339e..f8c5e47a30aa 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1021,16 +1021,16 @@ static ssize_t store_protocols(struct device *device,
 		goto out;
 	}
 
-	if (new_protocols == old_protocols) {
-		rc = len;
-		goto out;
+	if (new_protocols != old_protocols) {
+		*current_protocols = new_protocols;
+		IR_dprintk(1, "Protocols changed to 0x%llx\n",
+			   (long long)new_protocols);
 	}
 
-	*current_protocols = new_protocols;
-	IR_dprintk(1, "Protocols changed to 0x%llx\n", (long long)new_protocols);
-
 	/*
-	 * If the protocol is changed the filter needs updating.
+	 * If a protocol change was attempted the filter may need updating, even
+	 * if the actual protocol mask hasn't changed (since the driver may have
+	 * cleared the filter).
 	 * Try setting the same filter with the new protocol (if any).
 	 * Fall back to clearing the filter.
 	 */
diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
index 340f7f51eed4..7830aef3db45 100644
--- a/drivers/media/rc/sunxi-cir.c
+++ b/drivers/media/rc/sunxi-cir.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/reset.h>
 #include <media/rc-core.h>
 
 #define SUNXI_IR_DEV "sunxi-ir"
@@ -55,12 +56,12 @@
 #define REG_RXINT_RAI_EN		BIT(4)
 
 /* Rx FIFO available byte level */
-#define REG_RXINT_RAL(val)    (((val) << 8) & (GENMASK(11, 8)))
+#define REG_RXINT_RAL(val)    ((val) << 8)
 
 /* Rx Interrupt Status */
 #define SUNXI_IR_RXSTA_REG    0x30
 /* RX FIFO Get Available Counter */
-#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (GENMASK(5, 0)))
+#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
 /* Clear all interrupt status value */
 #define REG_RXSTA_CLEARALL    0xff
 
@@ -71,10 +72,6 @@
 /* CIR_REG register idle threshold */
 #define REG_CIR_ITHR(val)    (((val) << 8) & (GENMASK(15, 8)))
 
-/* Hardware supported fifo size */
-#define SUNXI_IR_FIFO_SIZE    16
-/* How many messages in FIFO trigger IRQ */
-#define TRIGGER_LEVEL         8
 /* Required frequency for IR0 or IR1 clock in CIR mode */
 #define SUNXI_IR_BASE_CLK     8000000
 /* Frequency after IR internal divider  */
@@ -93,8 +90,10 @@ struct sunxi_ir {
 	struct rc_dev   *rc;
 	void __iomem    *base;
 	int             irq;
+	int		fifo_size;
 	struct clk      *clk;
 	struct clk      *apb_clk;
+	struct reset_control *rst;
 	const char      *map_name;
 };
 
@@ -113,11 +112,11 @@ static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
 	/* clean all pending statuses */
 	writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
 
-	if (status & REG_RXINT_RAI_EN) {
+	if (status & (REG_RXINT_RAI_EN | REG_RXINT_RPEI_EN)) {
 		/* How many messages in fifo */
 		rc  = REG_RXSTA_GET_AC(status);
 		/* Sanity check */
-		rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
+		rc = rc > ir->fifo_size ? ir->fifo_size : rc;
 		/* If we have data */
 		for (cnt = 0; cnt < rc; cnt++) {
 			/* for each bit in fifo */
@@ -154,6 +153,11 @@ static int sunxi_ir_probe(struct platform_device *pdev)
 	if (!ir)
 		return -ENOMEM;
 
+	if (of_device_is_compatible(dn, "allwinner,sun5i-a13-ir"))
+		ir->fifo_size = 64;
+	else
+		ir->fifo_size = 16;
+
 	/* Clock */
 	ir->apb_clk = devm_clk_get(dev, "apb");
 	if (IS_ERR(ir->apb_clk)) {
@@ -166,15 +170,29 @@ static int sunxi_ir_probe(struct platform_device *pdev)
 		return PTR_ERR(ir->clk);
 	}
 
+	/* Reset (optional) */
+	ir->rst = devm_reset_control_get_optional(dev, NULL);
+	if (IS_ERR(ir->rst)) {
+		ret = PTR_ERR(ir->rst);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		ir->rst = NULL;
+	} else {
+		ret = reset_control_deassert(ir->rst);
+		if (ret)
+			return ret;
+	}
+
 	ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
 	if (ret) {
 		dev_err(dev, "set ir base clock failed!\n");
-		return ret;
+		goto exit_reset_assert;
 	}
 
 	if (clk_prepare_enable(ir->apb_clk)) {
 		dev_err(dev, "try to enable apb_ir_clk failed\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto exit_reset_assert;
 	}
 
 	if (clk_prepare_enable(ir->clk)) {
@@ -255,7 +273,7 @@ static int sunxi_ir_probe(struct platform_device *pdev)
 	 * level
 	 */
 	writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
-	       REG_RXINT_RAI_EN | REG_RXINT_RAL(TRIGGER_LEVEL - 1),
+	       REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
 	       ir->base + SUNXI_IR_RXINT_REG);
 
 	/* Enable IR Module */
@@ -271,6 +289,9 @@ exit_clkdisable_clk:
 	clk_disable_unprepare(ir->clk);
 exit_clkdisable_apb_clk:
 	clk_disable_unprepare(ir->apb_clk);
+exit_reset_assert:
+	if (ir->rst)
+		reset_control_assert(ir->rst);
 
 	return ret;
 }
@@ -282,6 +303,8 @@ static int sunxi_ir_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(ir->clk);
 	clk_disable_unprepare(ir->apb_clk);
+	if (ir->rst)
+		reset_control_assert(ir->rst);
 
 	spin_lock_irqsave(&ir->ir_lock, flags);
 	/* disable IR IRQ */
@@ -298,6 +321,7 @@ static int sunxi_ir_remove(struct platform_device *pdev)
 
 static const struct of_device_id sunxi_ir_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-ir", },
+	{ .compatible = "allwinner,sun5i-a13-ir", },
 	{},
 };