[media] media: rc: add sysfs scancode filtering interface

Add and document a generic sysfs based scancode filtering interface for
making use of IR data matching hardware to filter out uninteresting
scancodes. Two filters exist, one for normal operation and one for
filtering scancodes which are permitted to wake the system from suspend.

The following files are added to /sys/class/rc/rc?/:
 - filter: normal scancode filter value
 - filter_mask: normal scancode filter mask
 - wakeup_filter: wakeup scancode filter value
 - wakeup_filter_mask: wakeup scancode filter mask

A new s_filter() driver callback is added which must arrange for the
specified filter to be applied at the right time. Drivers can convert
the scancode filter into a raw IR data filter, which can be applied
immediately or later (for wake up filters).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: linux-media@vger.kernel.org
Cc: Rob Landley <rob@landley.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 136 insertions, 0 deletions

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f1b67db45e78..fa8b9575a84c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -969,6 +969,130 @@ out:
 	return ret;
 }
 
+/**
+ * struct rc_filter_attribute - Device attribute relating to a filter type.
+ * @attr:	Device attribute.
+ * @type:	Filter type.
+ * @mask:	false for filter value, true for filter mask.
+ */
+struct rc_filter_attribute {
+	struct device_attribute		attr;
+	enum rc_filter_type		type;
+	bool				mask;
+};
+#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr)
+
+#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask)	\
+	struct rc_filter_attribute dev_attr_##_name = {			\
+		.attr = __ATTR(_name, _mode, _show, _store),		\
+		.type = (_type),					\
+		.mask = (_mask),					\
+	}
+
+/**
+ * show_filter() - shows the current scancode filter value or mask
+ * @device:	the device descriptor
+ * @attr:	the device attribute struct
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine to read a scancode filter value or mask.
+ * It is trigged by reading /sys/class/rc/rc?/[wakeup_]filter[_mask].
+ * It prints the current scancode filter value or mask of the appropriate filter
+ * type in hexadecimal into @buf and returns the size of the buffer.
+ *
+ * Bits of the filter value corresponding to set bits in the filter mask are
+ * compared against input scancodes and non-matching scancodes are discarded.
+ *
+ * dev->lock is taken to guard against races between device registration,
+ * store_filter and show_filter.
+ */
+static ssize_t show_filter(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	struct rc_filter_attribute *fattr = to_rc_filter_attr(attr);
+	u32 val;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock);
+	if (!dev->s_filter)
+		val = 0;
+	else if (fattr->mask)
+		val = dev->scancode_filters[fattr->type].mask;
+	else
+		val = dev->scancode_filters[fattr->type].data;
+	mutex_unlock(&dev->lock);
+
+	return sprintf(buf, "%#x\n", val);
+}
+
+/**
+ * store_filter() - changes the scancode filter value
+ * @device:	the device descriptor
+ * @attr:	the device attribute struct
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is for changing a scancode filter value or mask.
+ * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]filter[_mask].
+ * Returns -EINVAL if an invalid filter value for the current protocol was
+ * specified or if scancode filtering is not supported by the driver, otherwise
+ * returns @len.
+ *
+ * Bits of the filter value corresponding to set bits in the filter mask are
+ * compared against input scancodes and non-matching scancodes are discarded.
+ *
+ * dev->lock is taken to guard against races between device registration,
+ * store_filter and show_filter.
+ */
+static ssize_t store_filter(struct device *device,
+			    struct device_attribute *attr,
+			    const char *buf,
+			    size_t count)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	struct rc_filter_attribute *fattr = to_rc_filter_attr(attr);
+	struct rc_scancode_filter local_filter, *filter;
+	int ret;
+	unsigned long val;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Scancode filter not supported (but still accept 0) */
+	if (!dev->s_filter)
+		return val ? -EINVAL : count;
+
+	mutex_lock(&dev->lock);
+
+	/* Tell the driver about the new filter */
+	filter = &dev->scancode_filters[fattr->type];
+	local_filter = *filter;
+	if (fattr->mask)
+		local_filter.mask = val;
+	else
+		local_filter.data = val;
+	ret = dev->s_filter(dev, fattr->type, &local_filter);
+	if (ret < 0)
+		goto unlock;
+
+	/* Success, commit the new filter */
+	*filter = local_filter;
+
+unlock:
+	mutex_unlock(&dev->lock);
+	return count;
+}
+
 static void rc_dev_release(struct device *device)
 {
 }
@@ -1000,9 +1124,21 @@ static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
  */
 static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
 		   show_protocols, store_protocols);
+static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_NORMAL, false);
+static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_NORMAL, true);
+static RC_FILTER_ATTR(wakeup_filter, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_WAKEUP, false);
+static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_WAKEUP, true);
 
 static struct attribute *rc_dev_attrs[] = {
 	&dev_attr_protocols.attr,
+	&dev_attr_filter.attr.attr,
+	&dev_attr_filter_mask.attr.attr,
+	&dev_attr_wakeup_filter.attr.attr,
+	&dev_attr_wakeup_filter_mask.attr.attr,
 	NULL,
 };