[media] move i2c files into drivers/media/i2c

Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 362 insertions, 0 deletions

diff --git a/drivers/media/i2c/m5mols/m5mols_reg.h b/drivers/media/i2c/m5mols/m5mols_reg.h
new file mode 100644
index 000000000000..14d4be72aeff
--- /dev/null
+++ b/drivers/media/i2c/m5mols/m5mols_reg.h
@@ -0,0 +1,362 @@
+/*
+ * Register map for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef M5MOLS_REG_H
+#define M5MOLS_REG_H
+
+#define M5MOLS_I2C_MAX_SIZE	4
+#define M5MOLS_BYTE_READ	0x01
+#define M5MOLS_BYTE_WRITE	0x02
+
+#define I2C_CATEGORY(__cat)		((__cat >> 16) & 0xff)
+#define I2C_COMMAND(__comm)		((__comm >> 8) & 0xff)
+#define I2C_SIZE(__reg_s)		((__reg_s) & 0xff)
+#define I2C_REG(__cat, __cmd, __reg_s)	((__cat << 16) | (__cmd << 8) | __reg_s)
+
+/*
+ * Category section register
+ *
+ * The category means set including relevant command of M-5MOLS.
+ */
+#define CAT_SYSTEM		0x00
+#define CAT_PARAM		0x01
+#define CAT_MONITOR		0x02
+#define CAT_AE			0x03
+#define CAT_WB			0x06
+#define CAT_EXIF		0x07
+#define CAT_FD			0x09
+#define CAT_LENS		0x0a
+#define CAT_CAPT_PARM		0x0b
+#define CAT_CAPT_CTRL		0x0c
+#define CAT_FLASH		0x0f	/* related to FW, revisions, booting */
+
+/*
+ * Category 0 - SYSTEM mode
+ *
+ * The SYSTEM mode in the M-5MOLS means area available to handle with the whole
+ * & all-round system of sensor. It deals with version/interrupt/setting mode &
+ * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by
+ * packaging & manufacturer, even the customer and project code. And the
+ * function details may vary among them. The version information helps to
+ * determine what methods shall be used in the driver.
+ *
+ * There is many registers between customer version address and awb one. For
+ * more specific contents, see definition if file m5mols.h.
+ */
+#define SYSTEM_VER_CUSTOMER	I2C_REG(CAT_SYSTEM, 0x00, 1)
+#define SYSTEM_VER_PROJECT	I2C_REG(CAT_SYSTEM, 0x01, 1)
+#define SYSTEM_VER_FIRMWARE	I2C_REG(CAT_SYSTEM, 0x02, 2)
+#define SYSTEM_VER_HARDWARE	I2C_REG(CAT_SYSTEM, 0x04, 2)
+#define SYSTEM_VER_PARAMETER	I2C_REG(CAT_SYSTEM, 0x06, 2)
+#define SYSTEM_VER_AWB		I2C_REG(CAT_SYSTEM, 0x08, 2)
+
+#define SYSTEM_SYSMODE		I2C_REG(CAT_SYSTEM, 0x0b, 1)
+#define REG_SYSINIT		0x00	/* SYSTEM mode */
+#define REG_PARAMETER		0x01	/* PARAMETER mode */
+#define REG_MONITOR		0x02	/* MONITOR mode */
+#define REG_CAPTURE		0x03	/* CAPTURE mode */
+
+#define SYSTEM_CMD(__cmd)	I2C_REG(CAT_SYSTEM, cmd, 1)
+#define SYSTEM_VER_STRING	I2C_REG(CAT_SYSTEM, 0x0a, 1)
+#define REG_SAMSUNG_ELECTRO	"SE"	/* Samsung Electro-Mechanics */
+#define REG_SAMSUNG_OPTICS	"OP"	/* Samsung Fiber-Optics */
+#define REG_SAMSUNG_TECHWIN	"TB"	/* Samsung Techwin */
+/* SYSTEM mode status */
+#define SYSTEM_STATUS	I2C_REG(CAT_SYSTEM, 0x0c, 1)
+
+/* Interrupt pending register */
+#define SYSTEM_INT_FACTOR	I2C_REG(CAT_SYSTEM, 0x10, 1)
+/* interrupt enable register */
+#define SYSTEM_INT_ENABLE	I2C_REG(CAT_SYSTEM, 0x11, 1)
+#define REG_INT_MODE		(1 << 0)
+#define REG_INT_AF		(1 << 1)
+#define REG_INT_ZOOM		(1 << 2)
+#define REG_INT_CAPTURE		(1 << 3)
+#define REG_INT_FRAMESYNC	(1 << 4)
+#define REG_INT_FD		(1 << 5)
+#define REG_INT_LENS_INIT	(1 << 6)
+#define REG_INT_SOUND		(1 << 7)
+#define REG_INT_MASK		0x0f
+
+/*
+ * category 1 - PARAMETER mode
+ *
+ * This category supports function of camera features of M-5MOLS. It means we
+ * can handle with preview(MONITOR) resolution size/frame per second/interface
+ * between the sensor and the Application Processor/even the image effect.
+ */
+
+/* Resolution in the MONITOR mode */
+#define PARM_MON_SIZE		I2C_REG(CAT_PARAM, 0x01, 1)
+
+/* Frame rate */
+#define PARM_MON_FPS		I2C_REG(CAT_PARAM, 0x02, 1)
+#define REG_FPS_30		0x02
+
+/* Video bus between the sensor and a host processor */
+#define PARM_INTERFACE		I2C_REG(CAT_PARAM, 0x00, 1)
+#define REG_INTERFACE_MIPI	0x02
+
+/* Image effects */
+#define PARM_EFFECT		I2C_REG(CAT_PARAM, 0x0b, 1)
+#define REG_EFFECT_OFF		0x00
+#define REG_EFFECT_NEGA		0x01
+#define REG_EFFECT_EMBOSS	0x06
+#define REG_EFFECT_OUTLINE	0x07
+#define REG_EFFECT_WATERCOLOR	0x08
+
+/*
+ * Category 2 - MONITOR mode
+ *
+ * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another
+ * mode named "Preview", but this preview mode is used at the case specific
+ * vider-recording mode. This mmode supports only YUYV format. On the other
+ * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are
+ * another options like zoom/color effect(different with effect in PARAMETER
+ * mode)/anti hand shaking algorithm.
+ */
+
+/* Target digital zoom position */
+#define MON_ZOOM		I2C_REG(CAT_MONITOR, 0x01, 1)
+
+/* CR value for color effect */
+#define MON_CFIXR		I2C_REG(CAT_MONITOR, 0x0a, 1)
+/* CB value for color effect */
+#define MON_CFIXB		I2C_REG(CAT_MONITOR, 0x09, 1)
+#define REG_CFIXB_SEPIA		0xd8
+#define REG_CFIXR_SEPIA		0x18
+
+#define MON_EFFECT		I2C_REG(CAT_MONITOR, 0x0b, 1)
+#define REG_COLOR_EFFECT_OFF	0x00
+#define REG_COLOR_EFFECT_ON	0x01
+
+/* Chroma enable */
+#define MON_CHROMA_EN		I2C_REG(CAT_MONITOR, 0x10, 1)
+/* Chroma level */
+#define MON_CHROMA_LVL		I2C_REG(CAT_MONITOR, 0x0f, 1)
+#define REG_CHROMA_OFF		0x00
+#define REG_CHROMA_ON		0x01
+
+/* Sharpness on/off */
+#define MON_EDGE_EN		I2C_REG(CAT_MONITOR, 0x12, 1)
+/* Sharpness level */
+#define MON_EDGE_LVL		I2C_REG(CAT_MONITOR, 0x11, 1)
+#define REG_EDGE_OFF		0x00
+#define REG_EDGE_ON		0x01
+
+/* Set color tone (contrast) */
+#define MON_TONE_CTL		I2C_REG(CAT_MONITOR, 0x25, 1)
+
+/*
+ * Category 3 - Auto Exposure
+ *
+ * The M-5MOLS exposure capbility is detailed as which is similar to digital
+ * camera. This category supports AE locking/various AE mode(range of exposure)
+ * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the
+ * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be
+ * different. So, this category also provide getting the max/min values. And,
+ * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values.
+ */
+
+/* Auto Exposure locking */
+#define AE_LOCK			I2C_REG(CAT_AE, 0x00, 1)
+#define REG_AE_UNLOCK		0x00
+#define REG_AE_LOCK		0x01
+
+/* Auto Exposure algorithm mode */
+#define AE_MODE			I2C_REG(CAT_AE, 0x01, 1)
+#define REG_AE_OFF		0x00	/* AE off */
+#define REG_AE_ALL		0x01	/* calc AE in all block integral */
+#define REG_AE_CENTER		0x03	/* calc AE in center weighted */
+#define REG_AE_SPOT		0x06	/* calc AE in specific spot */
+
+#define AE_ISO			I2C_REG(CAT_AE, 0x05, 1)
+#define REG_ISO_AUTO		0x00
+#define REG_ISO_50		0x01
+#define REG_ISO_100		0x02
+#define REG_ISO_200		0x03
+#define REG_ISO_400		0x04
+#define REG_ISO_800		0x05
+
+/* EV (scenemode) preset for MONITOR */
+#define AE_EV_PRESET_MONITOR	I2C_REG(CAT_AE, 0x0a, 1)
+/* EV (scenemode) preset for CAPTURE */
+#define AE_EV_PRESET_CAPTURE	I2C_REG(CAT_AE, 0x0b, 1)
+#define REG_SCENE_NORMAL	0x00
+#define REG_SCENE_PORTRAIT	0x01
+#define REG_SCENE_LANDSCAPE	0x02
+#define REG_SCENE_SPORTS	0x03
+#define REG_SCENE_PARTY_INDOOR	0x04
+#define REG_SCENE_BEACH_SNOW	0x05
+#define REG_SCENE_SUNSET	0x06
+#define REG_SCENE_DAWN_DUSK	0x07
+#define REG_SCENE_FALL		0x08
+#define REG_SCENE_NIGHT		0x09
+#define REG_SCENE_AGAINST_LIGHT	0x0a
+#define REG_SCENE_FIRE		0x0b
+#define REG_SCENE_TEXT		0x0c
+#define REG_SCENE_CANDLE	0x0d
+
+/* Manual gain in MONITOR mode */
+#define AE_MAN_GAIN_MON		I2C_REG(CAT_AE, 0x12, 2)
+/* Maximum gain in MONITOR mode */
+#define AE_MAX_GAIN_MON		I2C_REG(CAT_AE, 0x1a, 2)
+/* Manual gain in CAPTURE mode */
+#define AE_MAN_GAIN_CAP		I2C_REG(CAT_AE, 0x26, 2)
+
+#define AE_INDEX		I2C_REG(CAT_AE, 0x38, 1)
+#define REG_AE_INDEX_20_NEG	0x00
+#define REG_AE_INDEX_15_NEG	0x01
+#define REG_AE_INDEX_10_NEG	0x02
+#define REG_AE_INDEX_05_NEG	0x03
+#define REG_AE_INDEX_00		0x04
+#define REG_AE_INDEX_05_POS	0x05
+#define REG_AE_INDEX_10_POS	0x06
+#define REG_AE_INDEX_15_POS	0x07
+#define REG_AE_INDEX_20_POS	0x08
+
+/*
+ * Category 6 - White Balance
+ */
+
+/* Auto Whitebalance locking */
+#define AWB_LOCK		I2C_REG(CAT_WB, 0x00, 1)
+#define REG_AWB_UNLOCK		0x00
+#define REG_AWB_LOCK		0x01
+
+#define AWB_MODE		I2C_REG(CAT_WB, 0x02, 1)
+#define REG_AWB_AUTO		0x01	/* AWB off */
+#define REG_AWB_PRESET		0x02	/* AWB preset */
+
+/* Manual WB (preset) */
+#define AWB_MANUAL		I2C_REG(CAT_WB, 0x03, 1)
+#define REG_AWB_INCANDESCENT	0x01
+#define REG_AWB_FLUORESCENT_1	0x02
+#define REG_AWB_FLUORESCENT_2	0x03
+#define REG_AWB_DAYLIGHT	0x04
+#define REG_AWB_CLOUDY		0x05
+#define REG_AWB_SHADE		0x06
+#define REG_AWB_HORIZON		0x07
+#define REG_AWB_LEDLIGHT	0x09
+
+/*
+ * Category 7 - EXIF information
+ */
+#define EXIF_INFO_EXPTIME_NU	I2C_REG(CAT_EXIF, 0x00, 4)
+#define EXIF_INFO_EXPTIME_DE	I2C_REG(CAT_EXIF, 0x04, 4)
+#define EXIF_INFO_TV_NU		I2C_REG(CAT_EXIF, 0x08, 4)
+#define EXIF_INFO_TV_DE		I2C_REG(CAT_EXIF, 0x0c, 4)
+#define EXIF_INFO_AV_NU		I2C_REG(CAT_EXIF, 0x10, 4)
+#define EXIF_INFO_AV_DE		I2C_REG(CAT_EXIF, 0x14, 4)
+#define EXIF_INFO_BV_NU		I2C_REG(CAT_EXIF, 0x18, 4)
+#define EXIF_INFO_BV_DE		I2C_REG(CAT_EXIF, 0x1c, 4)
+#define EXIF_INFO_EBV_NU	I2C_REG(CAT_EXIF, 0x20, 4)
+#define EXIF_INFO_EBV_DE	I2C_REG(CAT_EXIF, 0x24, 4)
+#define EXIF_INFO_ISO		I2C_REG(CAT_EXIF, 0x28, 2)
+#define EXIF_INFO_FLASH		I2C_REG(CAT_EXIF, 0x2a, 2)
+#define EXIF_INFO_SDR		I2C_REG(CAT_EXIF, 0x2c, 2)
+#define EXIF_INFO_QVAL		I2C_REG(CAT_EXIF, 0x2e, 2)
+
+/*
+ * Category 9 - Face Detection
+ */
+#define FD_CTL			I2C_REG(CAT_FD, 0x00, 1)
+#define BIT_FD_EN		0
+#define BIT_FD_DRAW_FACE_FRAME	4
+#define BIT_FD_DRAW_SMILE_LVL	6
+#define REG_FD(shift)		(1 << shift)
+#define REG_FD_OFF		0x0
+
+/*
+ * Category A - Lens Parameter
+ */
+#define AF_MODE			I2C_REG(CAT_LENS, 0x01, 1)
+#define REG_AF_NORMAL		0x00	/* Normal AF, one time */
+#define REG_AF_MACRO		0x01	/* Macro AF, one time */
+#define REG_AF_POWEROFF		0x07
+
+#define AF_EXECUTE		I2C_REG(CAT_LENS, 0x02, 1)
+#define REG_AF_STOP		0x00
+#define REG_AF_EXE_AUTO		0x01
+#define REG_AF_EXE_CAF		0x02
+
+#define AF_STATUS		I2C_REG(CAT_LENS, 0x03, 1)
+#define REG_AF_FAIL		0x00
+#define REG_AF_SUCCESS		0x02
+#define REG_AF_IDLE		0x04
+#define REG_AF_BUSY		0x05
+
+#define AF_VERSION		I2C_REG(CAT_LENS, 0x0a, 1)
+
+/*
+ * Category B - CAPTURE Parameter
+ */
+#define CAPP_YUVOUT_MAIN	I2C_REG(CAT_CAPT_PARM, 0x00, 1)
+#define REG_YUV422		0x00
+#define REG_BAYER10		0x05
+#define REG_BAYER8		0x06
+#define REG_JPEG		0x10
+
+#define CAPP_MAIN_IMAGE_SIZE	I2C_REG(CAT_CAPT_PARM, 0x01, 1)
+#define CAPP_JPEG_RATIO		I2C_REG(CAT_CAPT_PARM, 0x17, 1)
+
+#define CAPP_MCC_MODE		I2C_REG(CAT_CAPT_PARM, 0x1d, 1)
+#define REG_MCC_OFF		0x00
+#define REG_MCC_NORMAL		0x01
+
+#define CAPP_WDR_EN		I2C_REG(CAT_CAPT_PARM, 0x2c, 1)
+#define REG_WDR_OFF		0x00
+#define REG_WDR_ON		0x01
+#define REG_WDR_AUTO		0x02
+
+#define CAPP_LIGHT_CTRL		I2C_REG(CAT_CAPT_PARM, 0x40, 1)
+#define REG_LIGHT_OFF		0x00
+#define REG_LIGHT_ON		0x01
+#define REG_LIGHT_AUTO		0x02
+
+#define CAPP_FLASH_CTRL		I2C_REG(CAT_CAPT_PARM, 0x41, 1)
+#define REG_FLASH_OFF		0x00
+#define REG_FLASH_ON		0x01
+#define REG_FLASH_AUTO		0x02
+
+/*
+ * Category C - CAPTURE Control
+ */
+#define CAPC_MODE		I2C_REG(CAT_CAPT_CTRL, 0x00, 1)
+#define REG_CAP_NONE		0x00
+#define REG_CAP_ANTI_SHAKE	0x02
+
+/* Select single- or multi-shot capture */
+#define CAPC_SEL_FRAME		I2C_REG(CAT_CAPT_CTRL, 0x06, 1)
+
+#define CAPC_START		I2C_REG(CAT_CAPT_CTRL, 0x09, 1)
+#define REG_CAP_START_MAIN	0x01
+#define REG_CAP_START_THUMB	0x03
+
+#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, 0x0d, 4)
+#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, 0x11, 4)
+
+/*
+ * Category F - Flash
+ *
+ * This mode provides functions about internal flash stuff and system startup.
+ */
+
+/* Starts internal ARM core booting after power-up */
+#define FLASH_CAM_START		I2C_REG(CAT_FLASH, 0x12, 1)
+#define REG_START_ARM_BOOT	0x01	/* write value */
+#define REG_IN_FLASH_MODE	0x00	/* read value */
+
+#endif	/* M5MOLS_REG_H */