raid5-ppl: Partial Parity Log write logging implementation

Implement the calculation of partial parity for a stripe and PPL write
logging functionality. The description of PPL is added to the
documentation. More details can be found in the comments in raid5-ppl.c.

Attach a page for holding the partial parity data to stripe_head.
Allocate it only if mddev has the MD_HAS_PPL flag set.

Partial parity is the xor of not modified data chunks of a stripe and is
calculated as follows:

- reconstruct-write case:
  xor data from all not updated disks in a stripe

- read-modify-write case:
  xor old data and parity from all updated disks in a stripe

Implement it using the async_tx API and integrate into raid_run_ops().
It must be called when we still have access to old data, so do it when
STRIPE_OP_BIODRAIN is set, but before ops_run_prexor5(). The result is
stored into sh->ppl_page.

Partial parity is not meaningful for full stripe write and is not stored
in the log or used for recovery, so don't attempt to calculate it when
stripe has STRIPE_FULL_WRITE.

Put the PPL metadata structures to md_p.h because userspace tools
(mdadm) will also need to read/write PPL.

Warn about using PPL with enabled disk volatile write-back cache for
now. It can be removed once disk cache flushing before writing PPL is
implemented.

Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>

5 files changed, 798 insertions, 5 deletions

diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 3cbda1af87a0..4d48714ccc6b 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -18,7 +18,7 @@ dm-cache-cleaner-y += dm-cache-policy-cleaner.o
 dm-era-y	+= dm-era-target.o
 dm-verity-y	+= dm-verity-target.o
 md-mod-y	+= md.o bitmap.o
-raid456-y	+= raid5.o raid5-cache.o
+raid456-y	+= raid5.o raid5-cache.o raid5-ppl.o
 
 # Note: link order is important.  All raid personalities
 # and must come before md.o, as they each initialise 
diff --git a/drivers/md/raid5-log.h b/drivers/md/raid5-log.h
index 2da4bd3bbd79..a67fb58513b9 100644
--- a/drivers/md/raid5-log.h
+++ b/drivers/md/raid5-log.h
@@ -31,6 +31,20 @@ extern struct md_sysfs_entry r5c_journal_mode;
 extern void r5c_update_on_rdev_error(struct mddev *mddev);
 extern bool r5c_big_stripe_cached(struct r5conf *conf, sector_t sect);
 
+extern struct dma_async_tx_descriptor *
+ops_run_partial_parity(struct stripe_head *sh, struct raid5_percpu *percpu,
+		       struct dma_async_tx_descriptor *tx);
+extern int ppl_init_log(struct r5conf *conf);
+extern void ppl_exit_log(struct r5conf *conf);
+extern int ppl_write_stripe(struct r5conf *conf, struct stripe_head *sh);
+extern void ppl_write_stripe_run(struct r5conf *conf);
+extern void ppl_stripe_write_finished(struct stripe_head *sh);
+
+static inline bool raid5_has_ppl(struct r5conf *conf)
+{
+	return test_bit(MD_HAS_PPL, &conf->mddev->flags);
+}
+
 static inline int log_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 {
 	struct r5conf *conf = sh->raid_conf;
@@ -45,6 +59,8 @@ static inline int log_stripe(struct stripe_head *sh, struct stripe_head_state *s
 			/* caching phase */
 			return r5c_cache_data(conf->log, sh);
 		}
+	} else if (raid5_has_ppl(conf)) {
+		return ppl_write_stripe(conf, sh);
 	}
 
 	return -EAGAIN;
@@ -56,24 +72,32 @@ static inline void log_stripe_write_finished(struct stripe_head *sh)
 
 	if (conf->log)
 		r5l_stripe_write_finished(sh);
+	else if (raid5_has_ppl(conf))
+		ppl_stripe_write_finished(sh);
 }
 
 static inline void log_write_stripe_run(struct r5conf *conf)
 {
 	if (conf->log)
 		r5l_write_stripe_run(conf->log);
+	else if (raid5_has_ppl(conf))
+		ppl_write_stripe_run(conf);
 }
 
 static inline void log_exit(struct r5conf *conf)
 {
 	if (conf->log)
 		r5l_exit_log(conf);
+	else if (raid5_has_ppl(conf))
+		ppl_exit_log(conf);
 }
 
 static inline int log_init(struct r5conf *conf, struct md_rdev *journal_dev)
 {
 	if (journal_dev)
 		return r5l_init_log(conf, journal_dev);
+	else if (raid5_has_ppl(conf))
+		return ppl_init_log(conf);
 
 	return 0;
 }
diff --git a/drivers/md/raid5-ppl.c b/drivers/md/raid5-ppl.c
new file mode 100644
index 000000000000..db5b72b11594
--- /dev/null
+++ b/drivers/md/raid5-ppl.c
@@ -0,0 +1,703 @@
+/*
+ * Partial Parity Log for closing the RAID5 write hole
+ * Copyright (c) 2017, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/crc32c.h>
+#include <linux/flex_array.h>
+#include <linux/async_tx.h>
+#include <linux/raid/md_p.h>
+#include "md.h"
+#include "raid5.h"
+
+/*
+ * PPL consists of a 4KB header (struct ppl_header) and at least 128KB for
+ * partial parity data. The header contains an array of entries
+ * (struct ppl_header_entry) which describe the logged write requests.
+ * Partial parity for the entries comes after the header, written in the same
+ * sequence as the entries:
+ *
+ * Header
+ *   entry0
+ *   ...
+ *   entryN
+ * PP data
+ *   PP for entry0
+ *   ...
+ *   PP for entryN
+ *
+ * An entry describes one or more consecutive stripe_heads, up to a full
+ * stripe. The modifed raid data chunks form an m-by-n matrix, where m is the
+ * number of stripe_heads in the entry and n is the number of modified data
+ * disks. Every stripe_head in the entry must write to the same data disks.
+ * An example of a valid case described by a single entry (writes to the first
+ * stripe of a 4 disk array, 16k chunk size):
+ *
+ * sh->sector   dd0   dd1   dd2    ppl
+ *            +-----+-----+-----+
+ * 0          | --- | --- | --- | +----+
+ * 8          | -W- | -W- | --- | | pp |   data_sector = 8
+ * 16         | -W- | -W- | --- | | pp |   data_size = 3 * 2 * 4k
+ * 24         | -W- | -W- | --- | | pp |   pp_size = 3 * 4k
+ *            +-----+-----+-----+ +----+
+ *
+ * data_sector is the first raid sector of the modified data, data_size is the
+ * total size of modified data and pp_size is the size of partial parity for
+ * this entry. Entries for full stripe writes contain no partial parity
+ * (pp_size = 0), they only mark the stripes for which parity should be
+ * recalculated after an unclean shutdown. Every entry holds a checksum of its
+ * partial parity, the header also has a checksum of the header itself.
+ *
+ * A write request is always logged to the PPL instance stored on the parity
+ * disk of the corresponding stripe. For each member disk there is one ppl_log
+ * used to handle logging for this disk, independently from others. They are
+ * grouped in child_logs array in struct ppl_conf, which is assigned to
+ * r5conf->log_private.
+ *
+ * ppl_io_unit represents a full PPL write, header_page contains the ppl_header.
+ * PPL entries for logged stripes are added in ppl_log_stripe(). A stripe_head
+ * can be appended to the last entry if it meets the conditions for a valid
+ * entry described above, otherwise a new entry is added. Checksums of entries
+ * are calculated incrementally as stripes containing partial parity are being
+ * added. ppl_submit_iounit() calculates the checksum of the header and submits
+ * a bio containing the header page and partial parity pages (sh->ppl_page) for
+ * all stripes of the io_unit. When the PPL write completes, the stripes
+ * associated with the io_unit are released and raid5d starts writing their data
+ * and parity. When all stripes are written, the io_unit is freed and the next
+ * can be submitted.
+ *
+ * An io_unit is used to gather stripes until it is submitted or becomes full
+ * (if the maximum number of entries or size of PPL is reached). Another io_unit
+ * can't be submitted until the previous has completed (PPL and stripe
+ * data+parity is written). The log->io_list tracks all io_units of a log
+ * (for a single member disk). New io_units are added to the end of the list
+ * and the first io_unit is submitted, if it is not submitted already.
+ * The current io_unit accepting new stripes is always at the end of the list.
+ */
+
+struct ppl_conf {
+	struct mddev *mddev;
+
+	/* array of child logs, one for each raid disk */
+	struct ppl_log *child_logs;
+	int count;
+
+	int block_size;		/* the logical block size used for data_sector
+				 * in ppl_header_entry */
+	u32 signature;		/* raid array identifier */
+	atomic64_t seq;		/* current log write sequence number */
+
+	struct kmem_cache *io_kc;
+	mempool_t *io_pool;
+	struct bio_set *bs;
+	mempool_t *meta_pool;
+};
+
+struct ppl_log {
+	struct ppl_conf *ppl_conf;	/* shared between all log instances */
+
+	struct md_rdev *rdev;		/* array member disk associated with
+					 * this log instance */
+	struct mutex io_mutex;
+	struct ppl_io_unit *current_io;	/* current io_unit accepting new data
+					 * always at the end of io_list */
+	spinlock_t io_list_lock;
+	struct list_head io_list;	/* all io_units of this log */
+	struct list_head no_mem_stripes;/* stripes to retry if failed to
+					 * allocate io_unit */
+};
+
+#define PPL_IO_INLINE_BVECS 32
+
+struct ppl_io_unit {
+	struct ppl_log *log;
+
+	struct page *header_page;	/* for ppl_header */
+
+	unsigned int entries_count;	/* number of entries in ppl_header */
+	unsigned int pp_size;		/* total size current of partial parity */
+
+	u64 seq;			/* sequence number of this log write */
+	struct list_head log_sibling;	/* log->io_list */
+
+	struct list_head stripe_list;	/* stripes added to the io_unit */
+	atomic_t pending_stripes;	/* how many stripes not written to raid */
+
+	bool submitted;			/* true if write to log started */
+
+	/* inline bio and its biovec for submitting the iounit */
+	struct bio bio;
+	struct bio_vec biovec[PPL_IO_INLINE_BVECS];
+};
+
+struct dma_async_tx_descriptor *
+ops_run_partial_parity(struct stripe_head *sh, struct raid5_percpu *percpu,
+		       struct dma_async_tx_descriptor *tx)
+{
+	int disks = sh->disks;
+	struct page **xor_srcs = flex_array_get(percpu->scribble, 0);
+	int count = 0, pd_idx = sh->pd_idx, i;
+	struct async_submit_ctl submit;
+
+	pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector);
+
+	/*
+	 * Partial parity is the XOR of stripe data chunks that are not changed
+	 * during the write request. Depending on available data
+	 * (read-modify-write vs. reconstruct-write case) we calculate it
+	 * differently.
+	 */
+	if (sh->reconstruct_state == reconstruct_state_prexor_drain_run) {
+		/* rmw: xor old data and parity from updated disks */
+		for (i = disks; i--;) {
+			struct r5dev *dev = &sh->dev[i];
+			if (test_bit(R5_Wantdrain, &dev->flags) || i == pd_idx)
+				xor_srcs[count++] = dev->page;
+		}
+	} else if (sh->reconstruct_state == reconstruct_state_drain_run) {
+		/* rcw: xor data from all not updated disks */
+		for (i = disks; i--;) {
+			struct r5dev *dev = &sh->dev[i];
+			if (test_bit(R5_UPTODATE, &dev->flags))
+				xor_srcs[count++] = dev->page;
+		}
+	} else {
+		return tx;
+	}
+
+	init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST, tx,
+			  NULL, sh, flex_array_get(percpu->scribble, 0)
+			  + sizeof(struct page *) * (sh->disks + 2));
+
+	if (count == 1)
+		tx = async_memcpy(sh->ppl_page, xor_srcs[0], 0, 0, PAGE_SIZE,
+				  &submit);
+	else
+		tx = async_xor(sh->ppl_page, xor_srcs, 0, count, PAGE_SIZE,
+			       &submit);
+
+	return tx;
+}
+
+static struct ppl_io_unit *ppl_new_iounit(struct ppl_log *log,
+					  struct stripe_head *sh)
+{
+	struct ppl_conf *ppl_conf = log->ppl_conf;
+	struct ppl_io_unit *io;
+	struct ppl_header *pplhdr;
+
+	io = mempool_alloc(ppl_conf->io_pool, GFP_ATOMIC);
+	if (!io)
+		return NULL;
+
+	memset(io, 0, sizeof(*io));
+	io->log = log;
+	INIT_LIST_HEAD(&io->log_sibling);
+	INIT_LIST_HEAD(&io->stripe_list);
+	atomic_set(&io->pending_stripes, 0);
+	bio_init(&io->bio, io->biovec, PPL_IO_INLINE_BVECS);
+
+	io->header_page = mempool_alloc(ppl_conf->meta_pool, GFP_NOIO);
+	pplhdr = page_address(io->header_page);
+	clear_page(pplhdr);
+	memset(pplhdr->reserved, 0xff, PPL_HDR_RESERVED);
+	pplhdr->signature = cpu_to_le32(ppl_conf->signature);
+
+	io->seq = atomic64_add_return(1, &ppl_conf->seq);
+	pplhdr->generation = cpu_to_le64(io->seq);
+
+	return io;
+}
+
+static int ppl_log_stripe(struct ppl_log *log, struct stripe_head *sh)
+{
+	struct ppl_io_unit *io = log->current_io;
+	struct ppl_header_entry *e = NULL;
+	struct ppl_header *pplhdr;
+	int i;
+	sector_t data_sector = 0;
+	int data_disks = 0;
+	unsigned int entry_space = (log->rdev->ppl.size << 9) - PPL_HEADER_SIZE;
+	struct r5conf *conf = sh->raid_conf;
+
+	pr_debug("%s: stripe: %llu\n", __func__, (unsigned long long)sh->sector);
+
+	/* check if current io_unit is full */
+	if (io && (io->pp_size == entry_space ||
+		   io->entries_count == PPL_HDR_MAX_ENTRIES)) {
+		pr_debug("%s: add io_unit blocked by seq: %llu\n",
+			 __func__, io->seq);
+		io = NULL;
+	}
+
+	/* add a new unit if there is none or the current is full */
+	if (!io) {
+		io = ppl_new_iounit(log, sh);
+		if (!io)
+			return -ENOMEM;
+		spin_lock_irq(&log->io_list_lock);
+		list_add_tail(&io->log_sibling, &log->io_list);
+		spin_unlock_irq(&log->io_list_lock);
+
+		log->current_io = io;
+	}
+
+	for (i = 0; i < sh->disks; i++) {
+		struct r5dev *dev = &sh->dev[i];
+
+		if (i != sh->pd_idx && test_bit(R5_Wantwrite, &dev->flags)) {
+			if (!data_disks || dev->sector < data_sector)
+				data_sector = dev->sector;
+			data_disks++;
+		}
+	}
+	BUG_ON(!data_disks);
+
+	pr_debug("%s: seq: %llu data_sector: %llu data_disks: %d\n", __func__,
+		 io->seq, (unsigned long long)data_sector, data_disks);
+
+	pplhdr = page_address(io->header_page);
+
+	if (io->entries_count > 0) {
+		struct ppl_header_entry *last =
+				&pplhdr->entries[io->entries_count - 1];
+		struct stripe_head *sh_last = list_last_entry(
+				&io->stripe_list, struct stripe_head, log_list);
+		u64 data_sector_last = le64_to_cpu(last->data_sector);
+		u32 data_size_last = le32_to_cpu(last->data_size);
+
+		/*
+		 * Check if we can append the stripe to the last entry. It must
+		 * be just after the last logged stripe and write to the same
+		 * disks. Use bit shift and logarithm to avoid 64-bit division.
+		 */
+		if ((sh->sector == sh_last->sector + STRIPE_SECTORS) &&
+		    (data_sector >> ilog2(conf->chunk_sectors) ==
+		     data_sector_last >> ilog2(conf->chunk_sectors)) &&
+		    ((data_sector - data_sector_last) * data_disks ==
+		     data_size_last >> 9))
+			e = last;
+	}
+
+	if (!e) {
+		e = &pplhdr->entries[io->entries_count++];
+		e->data_sector = cpu_to_le64(data_sector);
+		e->parity_disk = cpu_to_le32(sh->pd_idx);
+		e->checksum = cpu_to_le32(~0);
+	}
+
+	le32_add_cpu(&e->data_size, data_disks << PAGE_SHIFT);
+
+	/* don't write any PP if full stripe write */
+	if (!test_bit(STRIPE_FULL_WRITE, &sh->state)) {
+		le32_add_cpu(&e->pp_size, PAGE_SIZE);
+		io->pp_size += PAGE_SIZE;
+		e->checksum = cpu_to_le32(crc32c_le(le32_to_cpu(e->checksum),
+						    page_address(sh->ppl_page),
+						    PAGE_SIZE));
+	}
+
+	list_add_tail(&sh->log_list, &io->stripe_list);
+	atomic_inc(&io->pending_stripes);
+	sh->ppl_io = io;
+
+	return 0;
+}
+
+int ppl_write_stripe(struct r5conf *conf, struct stripe_head *sh)
+{
+	struct ppl_conf *ppl_conf = conf->log_private;
+	struct ppl_io_unit *io = sh->ppl_io;
+	struct ppl_log *log;
+
+	if (io || test_bit(STRIPE_SYNCING, &sh->state) ||
+	    !test_bit(R5_Wantwrite, &sh->dev[sh->pd_idx].flags) ||
+	    !test_bit(R5_Insync, &sh->dev[sh->pd_idx].flags)) {
+		clear_bit(STRIPE_LOG_TRAPPED, &sh->state);
+		return -EAGAIN;
+	}
+
+	log = &ppl_conf->child_logs[sh->pd_idx];
+
+	mutex_lock(&log->io_mutex);
+
+	if (!log->rdev || test_bit(Faulty, &log->rdev->flags)) {
+		mutex_unlock(&log->io_mutex);
+		return -EAGAIN;
+	}
+
+	set_bit(STRIPE_LOG_TRAPPED, &sh->state);
+	clear_bit(STRIPE_DELAYED, &sh->state);
+	atomic_inc(&sh->count);
+
+	if (ppl_log_stripe(log, sh)) {
+		spin_lock_irq(&log->io_list_lock);
+		list_add_tail(&sh->log_list, &log->no_mem_stripes);
+		spin_unlock_irq(&log->io_list_lock);
+	}
+
+	mutex_unlock(&log->io_mutex);
+
+	return 0;
+}
+
+static void ppl_log_endio(struct bio *bio)
+{
+	struct ppl_io_unit *io = bio->bi_private;
+	struct ppl_log *log = io->log;
+	struct ppl_conf *ppl_conf = log->ppl_conf;
+	struct stripe_head *sh, *next;
+
+	pr_debug("%s: seq: %llu\n", __func__, io->seq);
+
+	if (bio->bi_error)
+		md_error(ppl_conf->mddev, log->rdev);
+
+	mempool_free(io->header_page, ppl_conf->meta_pool);
+
+	list_for_each_entry_safe(sh, next, &io->stripe_list, log_list) {
+		list_del_init(&sh->log_list);
+
+		set_bit(STRIPE_HANDLE, &sh->state);
+		raid5_release_stripe(sh);
+	}
+}
+
+static void ppl_submit_iounit_bio(struct ppl_io_unit *io, struct bio *bio)
+{
+	char b[BDEVNAME_SIZE];
+
+	pr_debug("%s: seq: %llu size: %u sector: %llu dev: %s\n",
+		 __func__, io->seq, bio->bi_iter.bi_size,
+		 (unsigned long long)bio->bi_iter.bi_sector,
+		 bdevname(bio->bi_bdev, b));
+
+	submit_bio(bio);
+}
+
+static void ppl_submit_iounit(struct ppl_io_unit *io)
+{
+	struct ppl_log *log = io->log;
+	struct ppl_conf *ppl_conf = log->ppl_conf;
+	struct ppl_header *pplhdr = page_address(io->header_page);
+	struct bio *bio = &io->bio;
+	struct stripe_head *sh;
+	int i;
+
+	for (i = 0; i < io->entries_count; i++) {
+		struct ppl_header_entry *e = &pplhdr->entries[i];
+
+		pr_debug("%s: seq: %llu entry: %d data_sector: %llu pp_size: %u data_size: %u\n",
+			 __func__, io->seq, i, le64_to_cpu(e->data_sector),
+			 le32_to_cpu(e->pp_size), le32_to_cpu(e->data_size));
+
+		e->data_sector = cpu_to_le64(le64_to_cpu(e->data_sector) >>
+					     ilog2(ppl_conf->block_size >> 9));
+		e->checksum = cpu_to_le32(~le32_to_cpu(e->checksum));
+	}
+
+	pplhdr->entries_count = cpu_to_le32(io->entries_count);
+	pplhdr->checksum = cpu_to_le32(~crc32c_le(~0, pplhdr, PPL_HEADER_SIZE));
+
+	bio->bi_private = io;
+	bio->bi_end_io = ppl_log_endio;
+	bio->bi_opf = REQ_OP_WRITE | REQ_FUA;
+	bio->bi_bdev = log->rdev->bdev;
+	bio->bi_iter.bi_sector = log->rdev->ppl.sector;
+	bio_add_page(bio, io->header_page, PAGE_SIZE, 0);
+
+	list_for_each_entry(sh, &io->stripe_list, log_list) {
+		/* entries for full stripe writes have no partial parity */
+		if (test_bit(STRIPE_FULL_WRITE, &sh->state))
+			continue;
+
+		if (!bio_add_page(bio, sh->ppl_page, PAGE_SIZE, 0)) {
+			struct bio *prev = bio;
+
+			bio = bio_alloc_bioset(GFP_NOIO, BIO_MAX_PAGES,
+					       ppl_conf->bs);
+			bio->bi_opf = prev->bi_opf;
+			bio->bi_bdev = prev->bi_bdev;
+			bio->bi_iter.bi_sector = bio_end_sector(prev);
+			bio_add_page(bio, sh->ppl_page, PAGE_SIZE, 0);
+
+			bio_chain(bio, prev);
+			ppl_submit_iounit_bio(io, prev);
+		}
+	}
+
+	ppl_submit_iounit_bio(io, bio);
+}
+
+static void ppl_submit_current_io(struct ppl_log *log)
+{
+	struct ppl_io_unit *io;
+
+	spin_lock_irq(&log->io_list_lock);
+
+	io = list_first_entry_or_null(&log->io_list, struct ppl_io_unit,
+				      log_sibling);
+	if (io && io->submitted)
+		io = NULL;
+
+	spin_unlock_irq(&log->io_list_lock);
+
+	if (io) {
+		io->submitted = true;
+
+		if (io == log->current_io)
+			log->current_io = NULL;
+
+		ppl_submit_iounit(io);
+	}
+}
+
+void ppl_write_stripe_run(struct r5conf *conf)
+{
+	struct ppl_conf *ppl_conf = conf->log_private;
+	struct ppl_log *log;
+	int i;
+
+	for (i = 0; i < ppl_conf->count; i++) {
+		log = &ppl_conf->child_logs[i];
+
+		mutex_lock(&log->io_mutex);
+		ppl_submit_current_io(log);
+		mutex_unlock(&log->io_mutex);
+	}
+}
+
+static void ppl_io_unit_finished(struct ppl_io_unit *io)
+{
+	struct ppl_log *log = io->log;
+	unsigned long flags;
+
+	pr_debug("%s: seq: %llu\n", __func__, io->seq);
+
+	spin_lock_irqsave(&log->io_list_lock, flags);
+
+	list_del(&io->log_sibling);
+	mempool_free(io, log->ppl_conf->io_pool);
+
+	if (!list_empty(&log->no_mem_stripes)) {
+		struct stripe_head *sh = list_first_entry(&log->no_mem_stripes,
+							  struct stripe_head,
+							  log_list);
+		list_del_init(&sh->log_list);
+		set_bit(STRIPE_HANDLE, &sh->state);
+		raid5_release_stripe(sh);
+	}
+
+	spin_unlock_irqrestore(&log->io_list_lock, flags);
+}
+
+void ppl_stripe_write_finished(struct stripe_head *sh)
+{
+	struct ppl_io_unit *io;
+
+	io = sh->ppl_io;
+	sh->ppl_io = NULL;
+
+	if (io && atomic_dec_and_test(&io->pending_stripes))
+		ppl_io_unit_finished(io);
+}
+
+static void __ppl_exit_log(struct ppl_conf *ppl_conf)
+{
+	clear_bit(MD_HAS_PPL, &ppl_conf->mddev->flags);
+
+	kfree(ppl_conf->child_logs);
+
+	mempool_destroy(ppl_conf->meta_pool);
+	if (ppl_conf->bs)
+		bioset_free(ppl_conf->bs);
+	mempool_destroy(ppl_conf->io_pool);
+	kmem_cache_destroy(ppl_conf->io_kc);
+
+	kfree(ppl_conf);
+}
+
+void ppl_exit_log(struct r5conf *conf)
+{
+	struct ppl_conf *ppl_conf = conf->log_private;
+
+	if (ppl_conf) {
+		__ppl_exit_log(ppl_conf);
+		conf->log_private = NULL;
+	}
+}
+
+static int ppl_validate_rdev(struct md_rdev *rdev)
+{
+	char b[BDEVNAME_SIZE];
+	int ppl_data_sectors;
+	int ppl_size_new;
+
+	/*
+	 * The configured PPL size must be enough to store
+	 * the header and (at the very least) partial parity
+	 * for one stripe. Round it down to ensure the data
+	 * space is cleanly divisible by stripe size.
+	 */
+	ppl_data_sectors = rdev->ppl.size - (PPL_HEADER_SIZE >> 9);
+
+	if (ppl_data_sectors > 0)
+		ppl_data_sectors = rounddown(ppl_data_sectors, STRIPE_SECTORS);
+
+	if (ppl_data_sectors <= 0) {
+		pr_warn("md/raid:%s: PPL space too small on %s\n",
+			mdname(rdev->mddev), bdevname(rdev->bdev, b));
+		return -ENOSPC;
+	}
+
+	ppl_size_new = ppl_data_sectors + (PPL_HEADER_SIZE >> 9);
+
+	if ((rdev->ppl.sector < rdev->data_offset &&
+	     rdev->ppl.sector + ppl_size_new > rdev->data_offset) ||
+	    (rdev->ppl.sector >= rdev->data_offset &&
+	     rdev->data_offset + rdev->sectors > rdev->ppl.sector)) {
+		pr_warn("md/raid:%s: PPL space overlaps with data on %s\n",
+			mdname(rdev->mddev), bdevname(rdev->bdev, b));
+		return -EINVAL;
+	}
+
+	if (!rdev->mddev->external &&
+	    ((rdev->ppl.offset > 0 && rdev->ppl.offset < (rdev->sb_size >> 9)) ||
+	     (rdev->ppl.offset <= 0 && rdev->ppl.offset + ppl_size_new > 0))) {
+		pr_warn("md/raid:%s: PPL space overlaps with superblock on %s\n",
+			mdname(rdev->mddev), bdevname(rdev->bdev, b));
+		return -EINVAL;
+	}
+
+	rdev->ppl.size = ppl_size_new;
+
+	return 0;
+}
+
+int ppl_init_log(struct r5conf *conf)
+{
+	struct ppl_conf *ppl_conf;
+	struct mddev *mddev = conf->mddev;
+	int ret = 0;
+	int i;
+	bool need_cache_flush;
+
+	pr_debug("md/raid:%s: enabling distributed Partial Parity Log\n",
+		 mdname(conf->mddev));
+
+	if (PAGE_SIZE != 4096)
+		return -EINVAL;
+
+	if (mddev->level != 5) {
+		pr_warn("md/raid:%s PPL is not compatible with raid level %d\n",
+			mdname(mddev), mddev->level);
+		return -EINVAL;
+	}
+
+	if (mddev->bitmap_info.file || mddev->bitmap_info.offset) {
+		pr_warn("md/raid:%s PPL is not compatible with bitmap\n",
+			mdname(mddev));
+		return -EINVAL;
+	}
+
+	if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
+		pr_warn("md/raid:%s PPL is not compatible with journal\n",
+			mdname(mddev));
+		return -EINVAL;
+	}
+
+	ppl_conf = kzalloc(sizeof(struct ppl_conf), GFP_KERNEL);
+	if (!ppl_conf)
+		return -ENOMEM;
+
+	ppl_conf->mddev = mddev;
+
+	ppl_conf->io_kc = KMEM_CACHE(ppl_io_unit, 0);
+	if (!ppl_conf->io_kc) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ppl_conf->io_pool = mempool_create_slab_pool(conf->raid_disks, ppl_conf->io_kc);
+	if (!ppl_conf->io_pool) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ppl_conf->bs = bioset_create(conf->raid_disks, 0);
+	if (!ppl_conf->bs) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ppl_conf->meta_pool = mempool_create_page_pool(conf->raid_disks, 0);
+	if (!ppl_conf->meta_pool) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ppl_conf->count = conf->raid_disks;
+	ppl_conf->child_logs = kcalloc(ppl_conf->count, sizeof(struct ppl_log),
+				       GFP_KERNEL);
+	if (!ppl_conf->child_logs) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	atomic64_set(&ppl_conf->seq, 0);
+
+	if (!mddev->external) {
+		ppl_conf->signature = ~crc32c_le(~0, mddev->uuid, sizeof(mddev->uuid));
+		ppl_conf->block_size = 512;
+	} else {
+		ppl_conf->block_size = queue_logical_block_size(mddev->queue);
+	}
+
+	for (i = 0; i < ppl_conf->count; i++) {
+		struct ppl_log *log = &ppl_conf->child_logs[i];
+		struct md_rdev *rdev = conf->disks[i].rdev;
+
+		mutex_init(&log->io_mutex);
+		spin_lock_init(&log->io_list_lock);
+		INIT_LIST_HEAD(&log->io_list);
+		INIT_LIST_HEAD(&log->no_mem_stripes);
+
+		log->ppl_conf = ppl_conf;
+		log->rdev = rdev;
+
+		if (rdev) {
+			struct request_queue *q;
+
+			ret = ppl_validate_rdev(rdev);
+			if (ret)
+				goto err;
+
+			q = bdev_get_queue(rdev->bdev);
+			if (test_bit(QUEUE_FLAG_WC, &q->queue_flags))
+				need_cache_flush = true;
+		}
+	}
+
+	if (need_cache_flush)
+		pr_warn("md/raid:%s: Volatile write-back cache should be disabled on all member drives when using PPL!\n",
+			mdname(mddev));
+
+	conf->log_private = ppl_conf;
+
+	return 0;
+err:
+	__ppl_exit_log(ppl_conf);
+	return ret;
+}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f575f40d2acb..6b86e0826afe 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -482,6 +482,11 @@ static void shrink_buffers(struct stripe_head *sh)
 		sh->dev[i].page = NULL;
 		put_page(p);
 	}
+
+	if (sh->ppl_page) {
+		put_page(sh->ppl_page);
+		sh->ppl_page = NULL;
+	}
 }
 
 static int grow_buffers(struct stripe_head *sh, gfp_t gfp)
@@ -498,6 +503,13 @@ static int grow_buffers(struct stripe_head *sh, gfp_t gfp)
 		sh->dev[i].page = page;
 		sh->dev[i].orig_page = page;
 	}
+
+	if (raid5_has_ppl(sh->raid_conf)) {
+		sh->ppl_page = alloc_page(gfp);
+		if (!sh->ppl_page)
+			return 1;
+	}
+
 	return 0;
 }
 
@@ -746,7 +758,7 @@ static bool stripe_can_batch(struct stripe_head *sh)
 {
 	struct r5conf *conf = sh->raid_conf;
 
-	if (conf->log)
+	if (conf->log || raid5_has_ppl(conf))
 		return false;
 	return test_bit(STRIPE_BATCH_READY, &sh->state) &&
 		!test_bit(STRIPE_BITMAP_PENDING, &sh->state) &&
@@ -2093,6 +2105,9 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
 			async_tx_ack(tx);
 	}
 
+	if (test_bit(STRIPE_OP_PARTIAL_PARITY, &ops_request))
+		tx = ops_run_partial_parity(sh, percpu, tx);
+
 	if (test_bit(STRIPE_OP_PREXOR, &ops_request)) {
 		if (level < 6)
 			tx = ops_run_prexor5(sh, percpu, tx);
@@ -3168,6 +3183,12 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
 		s->locked++;
 	}
 
+	if (raid5_has_ppl(sh->raid_conf) &&
+	    test_bit(STRIPE_OP_BIODRAIN, &s->ops_request) &&
+	    !test_bit(STRIPE_FULL_WRITE, &sh->state) &&
+	    test_bit(R5_Insync, &sh->dev[pd_idx].flags))
+		set_bit(STRIPE_OP_PARTIAL_PARITY, &s->ops_request);
+
 	pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
 		__func__, (unsigned long long)sh->sector,
 		s->locked, s->ops_request);
@@ -3215,6 +3236,36 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx,
 	if (*bip && (*bip)->bi_iter.bi_sector < bio_end_sector(bi))
 		goto overlap;
 
+	if (forwrite && raid5_has_ppl(conf)) {
+		/*
+		 * With PPL only writes to consecutive data chunks within a
+		 * stripe are allowed because for a single stripe_head we can
+		 * only have one PPL entry at a time, which describes one data
+		 * range. Not really an overlap, but wait_for_overlap can be
+		 * used to handle this.
+		 */
+		sector_t sector;
+		sector_t first = 0;
+		sector_t last = 0;
+		int count = 0;
+		int i;
+
+		for (i = 0; i < sh->disks; i++) {
+			if (i != sh->pd_idx &&
+			    (i == dd_idx || sh->dev[i].towrite)) {
+				sector = sh->dev[i].sector;
+				if (count == 0 || sector < first)
+					first = sector;
+				if (sector > last)
+					last = sector;
+				count++;
+			}
+		}
+
+		if (first + conf->chunk_sectors * (count - 1) != last)
+			goto overlap;
+	}
+
 	if (!forwrite || previous)
 		clear_bit(STRIPE_BATCH_READY, &sh->state);
 
@@ -7208,6 +7259,13 @@ static int raid5_run(struct mddev *mddev)
 		BUG_ON(mddev->delta_disks != 0);
 	}
 
+	if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
+	    test_bit(MD_HAS_PPL, &mddev->flags)) {
+		pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
+			mdname(mddev));
+		clear_bit(MD_HAS_PPL, &mddev->flags);
+	}
+
 	if (mddev->private == NULL)
 		conf = setup_conf(mddev);
 	else
@@ -7689,7 +7747,7 @@ static int raid5_resize(struct mddev *mddev, sector_t sectors)
 	sector_t newsize;
 	struct r5conf *conf = mddev->private;
 
-	if (conf->log)
+	if (conf->log || raid5_has_ppl(conf))
 		return -EINVAL;
 	sectors &= ~((sector_t)conf->chunk_sectors - 1);
 	newsize = raid5_size(mddev, sectors, mddev->raid_disks);
@@ -7740,7 +7798,7 @@ static int check_reshape(struct mddev *mddev)
 {
 	struct r5conf *conf = mddev->private;
 
-	if (conf->log)
+	if (conf->log || raid5_has_ppl(conf))
 		return -EINVAL;
 	if (mddev->delta_disks == 0 &&
 	    mddev->new_layout == mddev->layout &&
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 6dd295a80ee1..ba5b7a3790af 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -224,10 +224,16 @@ struct stripe_head {
 	spinlock_t		batch_lock; /* only header's lock is useful */
 	struct list_head	batch_list; /* protected by head's batch lock*/
 
-	struct r5l_io_unit	*log_io;
+	union {
+		struct r5l_io_unit	*log_io;
+		struct ppl_io_unit	*ppl_io;
+	};
+
 	struct list_head	log_list;
 	sector_t		log_start; /* first meta block on the journal */
 	struct list_head	r5c; /* for r5c_cache->stripe_in_journal */
+
+	struct page		*ppl_page; /* partial parity of this stripe */
 	/**
 	 * struct stripe_operations
 	 * @target - STRIPE_OP_COMPUTE_BLK target
@@ -400,6 +406,7 @@ enum {
 	STRIPE_OP_BIODRAIN,
 	STRIPE_OP_RECONSTRUCT,
 	STRIPE_OP_CHECK,
+	STRIPE_OP_PARTIAL_PARITY,
 };
 
 /*
@@ -696,6 +703,7 @@ struct r5conf {
 	int			group_cnt;
 	int			worker_cnt_per_group;
 	struct r5l_log		*log;
+	void			*log_private;
 
 	spinlock_t		pending_bios_lock;
 	bool			batch_bio_dispatch;