summaryrefslogtreecommitdiffstats
path: root/drivers/md
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.de>2013-03-12 12:18:06 +1100
committerNeilBrown <neilb@suse.de>2013-03-20 13:20:59 +1100
commitf8dfcffd0472a0f353f34a567ad3f53568914d04 (patch)
tree8e19d10fcd778cace960c49336f1323858dcb4d5 /drivers/md
parent90584fc93d461520a888f691144f0879283b3624 (diff)
downloadlinux-f8dfcffd0472a0f353f34a567ad3f53568914d04.tar.bz2
md/raid5: ensure sync and DISCARD don't happen at the same time.
A number of problems can occur due to races between resync/recovery and discard. - if sync_request calls handle_stripe() while a discard is happening on the stripe, it might call handle_stripe_clean_event before all of the individual discard requests have completed (so some devices are still locked, but not all). Since commit ca64cae96037de16e4af92678814f5d4bf0c1c65 md/raid5: Make sure we clear R5_Discard when discard is finished. this will cause R5_Discard to be cleared for the parity device, so handle_stripe_clean_event() will not be called when the other devices do become unlocked, so their ->written will not be cleared. This ultimately leads to a WARN_ON in init_stripe and a lock-up. - If handle_stripe_clean_event() does clear R5_UPTODATE at an awkward time for resync, it can lead to s->uptodate being less than disks in handle_parity_checks5(), which triggers a BUG (because it is one). So: - keep R5_Discard on the parity device until all other devices have completed their discard request - make sure we don't try to have a 'discard' and a 'sync' action at the same time. This involves a new stripe flag to we know when a 'discard' is happening, and the use of R5_Overlap on the parity disk so when a discard is wanted while a sync is active, so we know to wake up the discard at the appropriate time. Discard support for RAID5 was added in 3.7, so this is suitable for any -stable kernel since 3.7. Cc: stable@vger.kernel.org (v3.7+) Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
Diffstat (limited to 'drivers/md')
-rw-r--r--drivers/md/raid5.c45
-rw-r--r--drivers/md/raid5.h1
2 files changed, 40 insertions, 6 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 52ba88a10668..42a899728748 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2576,6 +2576,8 @@ handle_failed_sync(struct r5conf *conf, struct stripe_head *sh,
int i;
clear_bit(STRIPE_SYNCING, &sh->state);
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
+ wake_up(&conf->wait_for_overlap);
s->syncing = 0;
s->replacing = 0;
/* There is nothing more to do for sync/check/repair.
@@ -2749,6 +2751,7 @@ static void handle_stripe_clean_event(struct r5conf *conf,
{
int i;
struct r5dev *dev;
+ int discard_pending = 0;
for (i = disks; i--; )
if (sh->dev[i].written) {
@@ -2777,9 +2780,23 @@ static void handle_stripe_clean_event(struct r5conf *conf,
STRIPE_SECTORS,
!test_bit(STRIPE_DEGRADED, &sh->state),
0);
- }
- } else if (test_bit(R5_Discard, &sh->dev[i].flags))
- clear_bit(R5_Discard, &sh->dev[i].flags);
+ } else if (test_bit(R5_Discard, &dev->flags))
+ discard_pending = 1;
+ }
+ if (!discard_pending &&
+ test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+ clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ if (sh->qd_idx >= 0) {
+ clear_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags);
+ }
+ /* now that discard is done we can proceed with any sync */
+ clear_bit(STRIPE_DISCARD, &sh->state);
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ }
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
@@ -3431,9 +3448,15 @@ static void handle_stripe(struct stripe_head *sh)
return;
}
- if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
- set_bit(STRIPE_SYNCING, &sh->state);
- clear_bit(STRIPE_INSYNC, &sh->state);
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+ spin_lock(&sh->stripe_lock);
+ /* Cannot process 'sync' concurrently with 'discard' */
+ if (!test_bit(STRIPE_DISCARD, &sh->state) &&
+ test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+ set_bit(STRIPE_SYNCING, &sh->state);
+ clear_bit(STRIPE_INSYNC, &sh->state);
+ }
+ spin_unlock(&sh->stripe_lock);
}
clear_bit(STRIPE_DELAYED, &sh->state);
@@ -3593,6 +3616,8 @@ static void handle_stripe(struct stripe_head *sh)
test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
clear_bit(STRIPE_SYNCING, &sh->state);
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
+ wake_up(&conf->wait_for_overlap);
}
/* If the failed drives are just a ReadError, then we might need
@@ -4159,6 +4184,13 @@ static void make_discard_request(struct mddev *mddev, struct bio *bi)
sh = get_active_stripe(conf, logical_sector, 0, 0, 0);
prepare_to_wait(&conf->wait_for_overlap, &w,
TASK_UNINTERRUPTIBLE);
+ set_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
+ if (test_bit(STRIPE_SYNCING, &sh->state)) {
+ release_stripe(sh);
+ schedule();
+ goto again;
+ }
+ clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
spin_lock_irq(&sh->stripe_lock);
for (d = 0; d < conf->raid_disks; d++) {
if (d == sh->pd_idx || d == sh->qd_idx)
@@ -4171,6 +4203,7 @@ static void make_discard_request(struct mddev *mddev, struct bio *bi)
goto again;
}
}
+ set_bit(STRIPE_DISCARD, &sh->state);
finish_wait(&conf->wait_for_overlap, &w);
for (d = 0; d < conf->raid_disks; d++) {
if (d == sh->pd_idx || d == sh->qd_idx)
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 18b2c4a8a1fd..050a334e89c1 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -323,6 +323,7 @@ enum {
STRIPE_COMPUTE_RUN,
STRIPE_OPS_REQ_PENDING,
STRIPE_ON_UNPLUG_LIST,
+ STRIPE_DISCARD,
};
/*