diff options
| author | bingjingc <bingjingc@synology.com> | 2017-11-17 10:57:44 +0800 |
|---|---|---|
| committer | Shaohua Li <shli@fb.com> | 2017-12-01 11:27:32 -0800 |
| commit | aff69d89bdebc39235cddb4445371eb979b49685 (patch) | |
| tree | 9cf208c4b30fb844b3fe8a1c1f1dd2121976d53a /drivers/md | |
| parent | a0651c7fa2c088a605f63792279859608ed7f2c8 (diff) | |
| download | linux-aff69d89bdebc39235cddb4445371eb979b49685.tar.bz2 | |
md/raid5: correct degraded calculation in raid5_error
When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).
mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure
cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.
However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.
Reported-by: Roy Chung <roychung@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Diffstat (limited to 'drivers/md')
| -rw-r--r-- | drivers/md/raid5.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 31dc25e2871a..98ce4272ace9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2677,13 +2677,13 @@ static void raid5_error(struct mddev *mddev, struct md_rdev *rdev) pr_debug("raid456: error called\n"); spin_lock_irqsave(&conf->device_lock, flags); + set_bit(Faulty, &rdev->flags); clear_bit(In_sync, &rdev->flags); mddev->degraded = raid5_calc_degraded(conf); spin_unlock_irqrestore(&conf->device_lock, flags); set_bit(MD_RECOVERY_INTR, &mddev->recovery); set_bit(Blocked, &rdev->flags); - set_bit(Faulty, &rdev->flags); set_mask_bits(&mddev->sb_flags, 0, BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING)); pr_crit("md/raid:%s: Disk failure on %s, disabling device.\n" |