summaryrefslogtreecommitdiffstats
path: root/drivers/leds/leds-lm3530.c
diff options
context:
space:
mode:
authorKim, Milo <Milo.Kim@ti.com>2012-03-23 15:02:11 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-23 16:58:35 -0700
commitbbe6453204c568723679212f6d0653b92b3d6244 (patch)
treed4aac20b7d66d26186b52d35c5dd9dbb9f5e01ef /drivers/leds/leds-lm3530.c
parent16db7f9095bf6bb394c9ddb64e738e64a0fea733 (diff)
downloadlinux-bbe6453204c568723679212f6d0653b92b3d6244.tar.bz2
leds-lm3530: set the max_brightness to 127
Only 7 bits are used for updating the brightness. (register address : A0h) So the max_brightness property of lm3530 should be set to 127. On initializing registers, maximum initial brightness is limited to 'max_brightness'. Division-by-two is removed on updating the brightness. This arithmetic is not necessary because the range of brightness is 0 ~ 127= . Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/leds/leds-lm3530.c')
-rw-r--r--drivers/leds/leds-lm3530.c11
1 files changed, 9 insertions, 2 deletions
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index e59c166a0ce2..2c32a8c45f89 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -80,6 +80,9 @@
#define LM3530_DEF_ZT_3 (0x33)
#define LM3530_DEF_ZT_4 (0x19)
+/* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */
+#define MAX_BRIGHTNESS (127)
+
struct lm3530_mode_map {
const char *mode;
enum lm3530_mode mode_val;
@@ -207,6 +210,9 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
else
brightness = drvdata->brightness = pltfm->brt_val;
+ if (brightness > drvdata->led_dev.max_brightness)
+ brightness = drvdata->led_dev.max_brightness;
+
reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
reg_val[1] = als_config; /* LM3530_ALS_CONFIG */
reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
@@ -264,12 +270,12 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,
/* set the brightness in brightness control register*/
err = i2c_smbus_write_byte_data(drvdata->client,
- LM3530_BRT_CTRL_REG, brt_val / 2);
+ LM3530_BRT_CTRL_REG, brt_val);
if (err)
dev_err(&drvdata->client->dev,
"Unable to set brightness: %d\n", err);
else
- drvdata->brightness = brt_val / 2;
+ drvdata->brightness = brt_val;
if (brt_val == 0) {
err = regulator_disable(drvdata->regulator);
@@ -380,6 +386,7 @@ static int __devinit lm3530_probe(struct i2c_client *client,
drvdata->enable = false;
drvdata->led_dev.name = LM3530_LED_DEV;
drvdata->led_dev.brightness_set = lm3530_brightness_set;
+ drvdata->led_dev.max_brightness = MAX_BRIGHTNESS;
i2c_set_clientdata(client, drvdata);