diff options
| author | Kim, Milo <Milo.Kim@ti.com> | 2012-03-23 15:02:11 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-23 16:58:35 -0700 |
| commit | bbe6453204c568723679212f6d0653b92b3d6244 (patch) | |
| tree | d4aac20b7d66d26186b52d35c5dd9dbb9f5e01ef /drivers/leds/leds-lm3530.c | |
| parent | 16db7f9095bf6bb394c9ddb64e738e64a0fea733 (diff) | |
| download | linux-bbe6453204c568723679212f6d0653b92b3d6244.tar.bz2 | |
leds-lm3530: set the max_brightness to 127
Only 7 bits are used for updating the brightness. (register address :
A0h) So the max_brightness property of lm3530 should be set to 127.
On initializing registers, maximum initial brightness is limited to
'max_brightness'.
Division-by-two is removed on updating the brightness. This arithmetic is
not necessary because the range of brightness is 0 ~ 127= .
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/leds/leds-lm3530.c')
| -rw-r--r-- | drivers/leds/leds-lm3530.c | 11 |
1 files changed, 9 insertions, 2 deletions
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c index e59c166a0ce2..2c32a8c45f89 100644 --- a/drivers/leds/leds-lm3530.c +++ b/drivers/leds/leds-lm3530.c @@ -80,6 +80,9 @@ #define LM3530_DEF_ZT_3 (0x33) #define LM3530_DEF_ZT_4 (0x19) +/* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */ +#define MAX_BRIGHTNESS (127) + struct lm3530_mode_map { const char *mode; enum lm3530_mode mode_val; @@ -207,6 +210,9 @@ static int lm3530_init_registers(struct lm3530_data *drvdata) else brightness = drvdata->brightness = pltfm->brt_val; + if (brightness > drvdata->led_dev.max_brightness) + brightness = drvdata->led_dev.max_brightness; + reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */ reg_val[1] = als_config; /* LM3530_ALS_CONFIG */ reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */ @@ -264,12 +270,12 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev, /* set the brightness in brightness control register*/ err = i2c_smbus_write_byte_data(drvdata->client, - LM3530_BRT_CTRL_REG, brt_val / 2); + LM3530_BRT_CTRL_REG, brt_val); if (err) dev_err(&drvdata->client->dev, "Unable to set brightness: %d\n", err); else - drvdata->brightness = brt_val / 2; + drvdata->brightness = brt_val; if (brt_val == 0) { err = regulator_disable(drvdata->regulator); @@ -380,6 +386,7 @@ static int __devinit lm3530_probe(struct i2c_client *client, drvdata->enable = false; drvdata->led_dev.name = LM3530_LED_DEV; drvdata->led_dev.brightness_set = lm3530_brightness_set; + drvdata->led_dev.max_brightness = MAX_BRIGHTNESS; i2c_set_clientdata(client, drvdata); |