summaryrefslogtreecommitdiffstats
path: root/drivers/leds/leds-bcm6328.c
diff options
context:
space:
mode:
authorSimon Arlott <simon@fire.lp0.eu>2015-11-15 13:34:37 +0000
committerJacek Anaszewski <j.anaszewski@samsung.com>2016-01-04 09:57:37 +0100
commitb964c5ba6d52475d70e3550fbb3780ebabedf7db (patch)
treeb2cbb931e3e6b9c1572519e3a8ed3c662c4612d1 /drivers/leds/leds-bcm6328.c
parent9d3c0663df338357625e75e7bead3322f083778b (diff)
downloadlinux-b964c5ba6d52475d70e3550fbb3780ebabedf7db.tar.bz2
leds: bcm6328: Swap LED ON and OFF definitions
The values of BCM6328_LED_MODE_ON and BCM6328_LED_MODE_OFF were named for active low LEDs. These should be swapped so that they are named for the default case of active high LEDs. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Diffstat (limited to 'drivers/leds/leds-bcm6328.c')
-rw-r--r--drivers/leds/leds-bcm6328.c12
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 95d0cf94089b..0329dee4687b 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -48,10 +48,10 @@
BCM6328_SERIAL_LED_SHIFT_DIR)
#define BCM6328_LED_MODE_MASK 3
-#define BCM6328_LED_MODE_OFF 0
+#define BCM6328_LED_MODE_ON 0
#define BCM6328_LED_MODE_FAST 1
#define BCM6328_LED_MODE_BLINK 2
-#define BCM6328_LED_MODE_ON 3
+#define BCM6328_LED_MODE_OFF 3
#define BCM6328_LED_SHIFT(X) ((X) << 1)
/**
@@ -126,9 +126,9 @@ static void bcm6328_led_set(struct led_classdev *led_cdev,
*(led->blink_leds) &= ~BIT(led->pin);
if ((led->active_low && value == LED_OFF) ||
(!led->active_low && value != LED_OFF))
- bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
- else
bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
+ else
+ bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
spin_unlock_irqrestore(led->lock, flags);
}
@@ -303,8 +303,8 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
val = bcm6328_led_read(mode) >>
BCM6328_LED_SHIFT(shift % 16);
val &= BCM6328_LED_MODE_MASK;
- if ((led->active_low && val == BCM6328_LED_MODE_ON) ||
- (!led->active_low && val == BCM6328_LED_MODE_OFF))
+ if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
+ (!led->active_low && val == BCM6328_LED_MODE_ON))
led->cdev.brightness = LED_FULL;
else
led->cdev.brightness = LED_OFF;